qemu/hw/intc
Luc Michel 3dd0471b75 intc/arm_gic: Refactor secure/ns access check in the CPU interface
An access to the CPU interface is non-secure if the current GIC instance
implements the security extensions, and the memory access is actually
non-secure. Until then, it was checked with tests such as
  if (s->security_extn && !attrs.secure) { ... }
in various places of the CPU interface code.

With the implementation of the virtualization extensions, those tests
must be updated to take into account whether we are in a vCPU interface
or not. This is because the exposed vCPU interface does not implement
security extensions.

This commits replaces all those tests with a call to the
gic_cpu_ns_access() function to check if the current access to the CPU
interface is non-secure. This function takes into account whether the
current CPU is a vCPU or not.

Note that this function is used only in the (v)CPU interface code path.
The distributor code path is left unchanged, as the distributor is not
exposed to vCPUs at all.

Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180727095421.386-9-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-14 17:17:20 +01:00
..
allwinner-a10-pic.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
apic_common.c migration: pre_save return int 2017-09-27 11:35:59 +01:00
apic.c apic: add function to apic that will be used by hvf 2017-12-22 15:01:19 +01:00
arm_gic_common.c intc/arm_gic: Add the virtualization extensions to the GIC state 2018-08-14 17:17:20 +01:00
arm_gic_kvm.c intc/arm_gic: Add the virtualization extensions to the GIC state 2018-08-14 17:17:20 +01:00
arm_gic.c intc/arm_gic: Refactor secure/ns access check in the CPU interface 2018-08-14 17:17:20 +01:00
arm_gicv2m.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
arm_gicv3_common.c hw/intc/arm_gicv3_common: Move gicd shift bug handling to gicv3_post_load 2018-08-06 16:19:33 +01:00
arm_gicv3_cpuif.c hw/intc/arm_gicv3: Check correct HCR_EL2 bit when routing IRQ 2018-07-24 11:42:15 +01:00
arm_gicv3_dist.c hw/intc/arm_gicv3: fix an extra left-shift when reading IPRIORITYR 2018-06-22 13:28:34 +01:00
arm_gicv3_its_common.c hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI 2018-01-11 13:25:40 +00:00
arm_gicv3_its_kvm.c target/arm: Allow KVM device address overwriting 2018-06-22 13:28:35 +01:00
arm_gicv3_kvm.c hw/intc/arm_gicv3_kvm: Get prepared to handle multiple redist regions 2018-06-22 13:28:36 +01:00
arm_gicv3_redist.c hw/intc/arm_gicv3: fix an extra left-shift when reading IPRIORITYR 2018-06-22 13:28:34 +01:00
arm_gicv3.c hw/intc/arm_gicv3: Introduce redist-region-count array property 2018-06-22 13:28:36 +01:00
armv7m_nvic.c nvic: Change NVIC to support ARMv6-M 2018-08-14 17:17:19 +01:00
aspeed_vic.c hw: Clean up includes 2016-06-07 18:19:23 +03:00
bcm2835_ic.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
bcm2836_control.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
etraxfs_pic.c qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable 2017-05-17 10:37:00 -03:00
exynos4210_combiner.c hw/intc: QOM'ify exynos4210_combiner.c 2016-05-12 13:22:24 +01:00
exynos4210_gic.c hw/intc/exynos4210_gic: Turn instance_init into realize function 2018-07-23 15:21:27 +01:00
gic_internal.h intc/arm_gic: Add virtualization extensions helper macros and functions 2018-08-14 17:17:20 +01:00
gicv3_internal.h target-arm: Add GICv3CPUState in CPUARMState struct 2017-02-28 17:10:00 +00:00
grlib_irqmp.c sparc/leon3 irqmp: fix IRQ software ack 2018-01-24 19:19:50 +00:00
heathrow_pic.c heathrow: remove obsolete heathow_init() function 2018-04-27 18:05:22 +10:00
i8259_common.c i8259: move TYPE_INTERRUPT_STATS_PROVIDER upper 2017-12-21 09:30:32 +01:00
i8259.c qdev: use device_class_set_parent_realize/unrealize/reset() 2018-02-05 13:54:38 +01:00
imx_avic.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
imx_gpcv2.c i.MX: Add code to emulate GPCv2 IP block 2018-02-09 10:40:30 +00:00
intc.c intc: add an interface to gather statistics/informations on interrupt controllers 2016-10-04 10:00:25 +02:00
ioapic_common.c ioapic: support "info irq" 2018-06-28 19:05:37 +02:00
ioapic.c ioapic: remove useless lower bounds check 2018-07-06 18:39:19 +02:00
lm32_pic.c misc: drop old i386 dependency 2017-12-18 17:07:03 +03:00
Makefile.objs i.MX: Add code to emulate GPCv2 IP block 2018-02-09 10:40:30 +00:00
mips_gic.c hw/mips_gic: Update pin state on mask changes 2017-02-21 22:24:58 +00:00
nios2_iic.c qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable 2017-05-17 10:37:00 -03:00
omap_intc.c Replace all occurances of __FUNCTION__ with __func__ 2018-01-22 09:46:18 +01:00
ompic.c openrisc/ompic: Add OpenRISC Multicore PIC (OMPIC) 2017-10-21 06:35:47 +09:00
openpic_kvm.c openpic_kvm: drop address_space_to_flatview call 2018-03-06 14:01:27 +01:00
openpic.c openpic: move OpenPIC state and related definitions to openpic.h 2018-03-06 13:16:29 +11:00
pl190.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
puv3_intc.c unicore: Clean up includes 2016-01-29 15:07:22 +00:00
realview_gic.c hw/*/realview: Fix introspection problem with 'realview_mpcore' & 'realview_gic' 2018-07-17 13:12:49 +01:00
s390_flic_kvm.c s390x/kvm: cache the kvm flic in a central function 2018-02-09 09:37:13 +01:00
s390_flic.c qmp: expose s390-specific CPU info 2018-02-26 12:55:26 +01:00
sh_intc.c hw: explicitly include qemu-common.h and cpu.h 2016-03-22 22:20:17 +01:00
slavio_intctl.c sun4m: remove include/hw/sparc/sun4m.h and all references to it 2018-01-09 21:48:20 +00:00
trace-events target/arm: Escalate to correct HardFault when AIRCR.BFHFNMINS is set 2018-07-24 11:43:08 +01:00
vgic_common.h intc/gic: Extract some reusable vGIC code 2015-09-24 01:29:36 +01:00
xics_kvm.c ppc/xics: rework the ICS classes inheritance tree 2018-07-03 09:56:51 +10:00
xics_pnv.c ppc/xics: introduce ICP DeviceRealize and DeviceReset handlers 2018-07-03 09:56:51 +10:00
xics_spapr.c Include qapi/error.h exactly where needed 2018-02-09 13:50:17 +01:00
xics.c ppc/xics: fix ICP reset path 2018-07-16 11:18:09 +10:00
xilinx_intc.c hw/intc: Clean up includes 2016-01-29 15:07:24 +00:00
xlnx-pmu-iomod-intc.c xlnx-pmu-iomod-intc: Add the PMU Interrupt controller 2018-01-26 11:09:09 +01:00
xlnx-zynqmp-ipi.c xlnx-zynqmp-ipi: Initial version of the Xilinx IPI device 2018-01-26 11:09:09 +01:00