mirror of
https://github.com/qemu/qemu.git
synced 2025-07-30 16:37:00 +00:00

The q35 machine type currently lets the guest firmware select a 1MB, 2MB or 8MB TSEG (basically, SMRAM) size. In edk2/OVMF, we use 8MB, but even that is not enough when a lot of VCPUs (more than approx. 224) are configured -- SMRAM footprint scales largely proportionally with VCPU count. Introduce a new property for "mch" called "extended-tseg-mbytes", which expresses (in megabytes) the user's choice of TSEG (SMRAM) size. Invent a new, QEMU-specific register in the config space of the DRAM Controller, at offset 0x50, in order to allow guest firmware to query the TSEG (SMRAM) size. According to Intel Document Number 316966-002, Table 5-1 "DRAM Controller Register Address Map (D0:F0)": Warning: Address locations that are not listed are considered Intel Reserved registers locations. Reads to Reserved registers may return non-zero values. Writes to reserved locations may cause system failures. All registers that are defined in the PCI 2.3 specification, but are not necessary or implemented in this component are simply not included in this document. The reserved/unimplemented space in the PCI configuration header space is not documented as such in this summary. Offsets 0x50 and 0x51 are not listed in Table 5-1. They are also not part of the standard PCI config space header. And they precede the capability list as well, which starts at 0xe0 for this device. When the guest writes value 0xffff to this register, the value that can be read back is that of "mch.extended-tseg-mbytes" -- unless it remains 0xffff. The guest is required to write 0xffff first (as opposed to a read-only register) because PCI config space is generally not cleared on QEMU reset, and after S3 resume or reboot, new guest firmware running on old QEMU could read a guest OS-injected value from this register. After reading the available "extended" TSEG size, the guest firmware may actually request that TSEG size by writing pattern 11b to the ESMRAMC register's TSEG_SZ bit-field. (The Intel spec referenced above defines only patterns 00b (1MB), 01b (2MB) and 10b (8MB); 11b is reserved.) On the QEMU command line, the value can be set with -global mch.extended-tseg-mbytes=N The default value for 2.10+ q35 machine types is 16. The value is limited to 0xfff (4095) at the moment, purely so that the product (4095 MB) can be stored to the uint32_t variable "tseg_size" in mch_update_smram(). Users are responsible for choosing sensible TSEG sizes. On 2.9 and earlier q35 machine types, the default value is 0. This lets the 11b bit pattern in ESMRAMC.TSEG_SZ, and the register at offset 0x50, keep their original behavior. When "extended-tseg-mbytes" is nonzero, the new register at offset 0x50 is set to that value on reset, for completeness. PCI config space is migrated automatically, so no VMSD changes are necessary. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1447027 Ref: https://lists.01.org/pipermail/edk2-devel/2017-May/010456.html Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
604 lines
21 KiB
C
604 lines
21 KiB
C
/*
|
|
* QEMU MCH/ICH9 PCI Bridge Emulation
|
|
*
|
|
* Copyright (c) 2006 Fabrice Bellard
|
|
* Copyright (c) 2009, 2010, 2011
|
|
* Isaku Yamahata <yamahata at valinux co jp>
|
|
* VA Linux Systems Japan K.K.
|
|
* Copyright (C) 2012 Jason Baron <jbaron@redhat.com>
|
|
*
|
|
* This is based on piix.c, but heavily modified.
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
#include "qemu/osdep.h"
|
|
#include "hw/hw.h"
|
|
#include "hw/pci-host/q35.h"
|
|
#include "qapi/error.h"
|
|
#include "qapi/visitor.h"
|
|
|
|
/****************************************************************************
|
|
* Q35 host
|
|
*/
|
|
|
|
static void q35_host_realize(DeviceState *dev, Error **errp)
|
|
{
|
|
PCIHostState *pci = PCI_HOST_BRIDGE(dev);
|
|
Q35PCIHost *s = Q35_HOST_DEVICE(dev);
|
|
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
|
|
|
|
sysbus_add_io(sbd, MCH_HOST_BRIDGE_CONFIG_ADDR, &pci->conf_mem);
|
|
sysbus_init_ioports(sbd, MCH_HOST_BRIDGE_CONFIG_ADDR, 4);
|
|
|
|
sysbus_add_io(sbd, MCH_HOST_BRIDGE_CONFIG_DATA, &pci->data_mem);
|
|
sysbus_init_ioports(sbd, MCH_HOST_BRIDGE_CONFIG_DATA, 4);
|
|
|
|
pci->bus = pci_bus_new(DEVICE(s), "pcie.0",
|
|
s->mch.pci_address_space, s->mch.address_space_io,
|
|
0, TYPE_PCIE_BUS);
|
|
PC_MACHINE(qdev_get_machine())->bus = pci->bus;
|
|
qdev_set_parent_bus(DEVICE(&s->mch), BUS(pci->bus));
|
|
qdev_init_nofail(DEVICE(&s->mch));
|
|
}
|
|
|
|
static const char *q35_host_root_bus_path(PCIHostState *host_bridge,
|
|
PCIBus *rootbus)
|
|
{
|
|
Q35PCIHost *s = Q35_HOST_DEVICE(host_bridge);
|
|
|
|
/* For backwards compat with old device paths */
|
|
if (s->mch.short_root_bus) {
|
|
return "0000";
|
|
}
|
|
return "0000:00";
|
|
}
|
|
|
|
static void q35_host_get_pci_hole_start(Object *obj, Visitor *v,
|
|
const char *name, void *opaque,
|
|
Error **errp)
|
|
{
|
|
Q35PCIHost *s = Q35_HOST_DEVICE(obj);
|
|
uint64_t val64;
|
|
uint32_t value;
|
|
|
|
val64 = range_is_empty(&s->mch.pci_hole)
|
|
? 0 : range_lob(&s->mch.pci_hole);
|
|
value = val64;
|
|
assert(value == val64);
|
|
visit_type_uint32(v, name, &value, errp);
|
|
}
|
|
|
|
static void q35_host_get_pci_hole_end(Object *obj, Visitor *v,
|
|
const char *name, void *opaque,
|
|
Error **errp)
|
|
{
|
|
Q35PCIHost *s = Q35_HOST_DEVICE(obj);
|
|
uint64_t val64;
|
|
uint32_t value;
|
|
|
|
val64 = range_is_empty(&s->mch.pci_hole)
|
|
? 0 : range_upb(&s->mch.pci_hole) + 1;
|
|
value = val64;
|
|
assert(value == val64);
|
|
visit_type_uint32(v, name, &value, errp);
|
|
}
|
|
|
|
static void q35_host_get_pci_hole64_start(Object *obj, Visitor *v,
|
|
const char *name, void *opaque,
|
|
Error **errp)
|
|
{
|
|
PCIHostState *h = PCI_HOST_BRIDGE(obj);
|
|
Range w64;
|
|
uint64_t value;
|
|
|
|
pci_bus_get_w64_range(h->bus, &w64);
|
|
value = range_is_empty(&w64) ? 0 : range_lob(&w64);
|
|
visit_type_uint64(v, name, &value, errp);
|
|
}
|
|
|
|
static void q35_host_get_pci_hole64_end(Object *obj, Visitor *v,
|
|
const char *name, void *opaque,
|
|
Error **errp)
|
|
{
|
|
PCIHostState *h = PCI_HOST_BRIDGE(obj);
|
|
Range w64;
|
|
uint64_t value;
|
|
|
|
pci_bus_get_w64_range(h->bus, &w64);
|
|
value = range_is_empty(&w64) ? 0 : range_upb(&w64) + 1;
|
|
visit_type_uint64(v, name, &value, errp);
|
|
}
|
|
|
|
static void q35_host_get_mmcfg_size(Object *obj, Visitor *v, const char *name,
|
|
void *opaque, Error **errp)
|
|
{
|
|
PCIExpressHost *e = PCIE_HOST_BRIDGE(obj);
|
|
uint32_t value = e->size;
|
|
|
|
visit_type_uint32(v, name, &value, errp);
|
|
}
|
|
|
|
static Property q35_host_props[] = {
|
|
DEFINE_PROP_UINT64(PCIE_HOST_MCFG_BASE, Q35PCIHost, parent_obj.base_addr,
|
|
MCH_HOST_BRIDGE_PCIEXBAR_DEFAULT),
|
|
DEFINE_PROP_SIZE(PCI_HOST_PROP_PCI_HOLE64_SIZE, Q35PCIHost,
|
|
mch.pci_hole64_size, DEFAULT_PCI_HOLE64_SIZE),
|
|
DEFINE_PROP_UINT32("short_root_bus", Q35PCIHost, mch.short_root_bus, 0),
|
|
DEFINE_PROP_SIZE(PCI_HOST_BELOW_4G_MEM_SIZE, Q35PCIHost,
|
|
mch.below_4g_mem_size, 0),
|
|
DEFINE_PROP_SIZE(PCI_HOST_ABOVE_4G_MEM_SIZE, Q35PCIHost,
|
|
mch.above_4g_mem_size, 0),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void q35_host_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(klass);
|
|
|
|
hc->root_bus_path = q35_host_root_bus_path;
|
|
dc->realize = q35_host_realize;
|
|
dc->props = q35_host_props;
|
|
/* Reason: needs to be wired up by pc_q35_init */
|
|
dc->user_creatable = false;
|
|
set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
|
|
dc->fw_name = "pci";
|
|
}
|
|
|
|
static void q35_host_initfn(Object *obj)
|
|
{
|
|
Q35PCIHost *s = Q35_HOST_DEVICE(obj);
|
|
PCIHostState *phb = PCI_HOST_BRIDGE(obj);
|
|
|
|
memory_region_init_io(&phb->conf_mem, obj, &pci_host_conf_le_ops, phb,
|
|
"pci-conf-idx", 4);
|
|
memory_region_init_io(&phb->data_mem, obj, &pci_host_data_le_ops, phb,
|
|
"pci-conf-data", 4);
|
|
|
|
object_initialize(&s->mch, sizeof(s->mch), TYPE_MCH_PCI_DEVICE);
|
|
object_property_add_child(OBJECT(s), "mch", OBJECT(&s->mch), NULL);
|
|
qdev_prop_set_uint32(DEVICE(&s->mch), "addr", PCI_DEVFN(0, 0));
|
|
qdev_prop_set_bit(DEVICE(&s->mch), "multifunction", false);
|
|
|
|
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE_START, "int",
|
|
q35_host_get_pci_hole_start,
|
|
NULL, NULL, NULL, NULL);
|
|
|
|
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE_END, "int",
|
|
q35_host_get_pci_hole_end,
|
|
NULL, NULL, NULL, NULL);
|
|
|
|
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE64_START, "int",
|
|
q35_host_get_pci_hole64_start,
|
|
NULL, NULL, NULL, NULL);
|
|
|
|
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE64_END, "int",
|
|
q35_host_get_pci_hole64_end,
|
|
NULL, NULL, NULL, NULL);
|
|
|
|
object_property_add(obj, PCIE_HOST_MCFG_SIZE, "int",
|
|
q35_host_get_mmcfg_size,
|
|
NULL, NULL, NULL, NULL);
|
|
|
|
object_property_add_link(obj, MCH_HOST_PROP_RAM_MEM, TYPE_MEMORY_REGION,
|
|
(Object **) &s->mch.ram_memory,
|
|
qdev_prop_allow_set_link_before_realize, 0, NULL);
|
|
|
|
object_property_add_link(obj, MCH_HOST_PROP_PCI_MEM, TYPE_MEMORY_REGION,
|
|
(Object **) &s->mch.pci_address_space,
|
|
qdev_prop_allow_set_link_before_realize, 0, NULL);
|
|
|
|
object_property_add_link(obj, MCH_HOST_PROP_SYSTEM_MEM, TYPE_MEMORY_REGION,
|
|
(Object **) &s->mch.system_memory,
|
|
qdev_prop_allow_set_link_before_realize, 0, NULL);
|
|
|
|
object_property_add_link(obj, MCH_HOST_PROP_IO_MEM, TYPE_MEMORY_REGION,
|
|
(Object **) &s->mch.address_space_io,
|
|
qdev_prop_allow_set_link_before_realize, 0, NULL);
|
|
|
|
/* Leave enough space for the biggest MCFG BAR */
|
|
/* TODO: this matches current bios behaviour, but
|
|
* it's not a power of two, which means an MTRR
|
|
* can't cover it exactly.
|
|
*/
|
|
range_set_bounds(&s->mch.pci_hole,
|
|
MCH_HOST_BRIDGE_PCIEXBAR_DEFAULT + MCH_HOST_BRIDGE_PCIEXBAR_MAX,
|
|
IO_APIC_DEFAULT_ADDRESS - 1);
|
|
}
|
|
|
|
static const TypeInfo q35_host_info = {
|
|
.name = TYPE_Q35_HOST_DEVICE,
|
|
.parent = TYPE_PCIE_HOST_BRIDGE,
|
|
.instance_size = sizeof(Q35PCIHost),
|
|
.instance_init = q35_host_initfn,
|
|
.class_init = q35_host_class_init,
|
|
};
|
|
|
|
/****************************************************************************
|
|
* MCH D0:F0
|
|
*/
|
|
|
|
static uint64_t tseg_blackhole_read(void *ptr, hwaddr reg, unsigned size)
|
|
{
|
|
return 0xffffffff;
|
|
}
|
|
|
|
static void tseg_blackhole_write(void *opaque, hwaddr addr, uint64_t val,
|
|
unsigned width)
|
|
{
|
|
/* nothing */
|
|
}
|
|
|
|
static const MemoryRegionOps tseg_blackhole_ops = {
|
|
.read = tseg_blackhole_read,
|
|
.write = tseg_blackhole_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
.valid.min_access_size = 1,
|
|
.valid.max_access_size = 4,
|
|
.impl.min_access_size = 4,
|
|
.impl.max_access_size = 4,
|
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
|
};
|
|
|
|
/* PCIe MMCFG */
|
|
static void mch_update_pciexbar(MCHPCIState *mch)
|
|
{
|
|
PCIDevice *pci_dev = PCI_DEVICE(mch);
|
|
BusState *bus = qdev_get_parent_bus(DEVICE(mch));
|
|
PCIExpressHost *pehb = PCIE_HOST_BRIDGE(bus->parent);
|
|
|
|
uint64_t pciexbar;
|
|
int enable;
|
|
uint64_t addr;
|
|
uint64_t addr_mask;
|
|
uint32_t length;
|
|
|
|
pciexbar = pci_get_quad(pci_dev->config + MCH_HOST_BRIDGE_PCIEXBAR);
|
|
enable = pciexbar & MCH_HOST_BRIDGE_PCIEXBAREN;
|
|
addr_mask = MCH_HOST_BRIDGE_PCIEXBAR_ADMSK;
|
|
switch (pciexbar & MCH_HOST_BRIDGE_PCIEXBAR_LENGTH_MASK) {
|
|
case MCH_HOST_BRIDGE_PCIEXBAR_LENGTH_256M:
|
|
length = 256 * 1024 * 1024;
|
|
break;
|
|
case MCH_HOST_BRIDGE_PCIEXBAR_LENGTH_128M:
|
|
length = 128 * 1024 * 1024;
|
|
addr_mask |= MCH_HOST_BRIDGE_PCIEXBAR_128ADMSK |
|
|
MCH_HOST_BRIDGE_PCIEXBAR_64ADMSK;
|
|
break;
|
|
case MCH_HOST_BRIDGE_PCIEXBAR_LENGTH_64M:
|
|
length = 64 * 1024 * 1024;
|
|
addr_mask |= MCH_HOST_BRIDGE_PCIEXBAR_64ADMSK;
|
|
break;
|
|
case MCH_HOST_BRIDGE_PCIEXBAR_LENGTH_RVD:
|
|
default:
|
|
abort();
|
|
}
|
|
addr = pciexbar & addr_mask;
|
|
pcie_host_mmcfg_update(pehb, enable, addr, length);
|
|
/* Leave enough space for the MCFG BAR */
|
|
/*
|
|
* TODO: this matches current bios behaviour, but it's not a power of two,
|
|
* which means an MTRR can't cover it exactly.
|
|
*/
|
|
if (enable) {
|
|
range_set_bounds(&mch->pci_hole,
|
|
addr + length,
|
|
IO_APIC_DEFAULT_ADDRESS - 1);
|
|
} else {
|
|
range_set_bounds(&mch->pci_hole,
|
|
MCH_HOST_BRIDGE_PCIEXBAR_DEFAULT,
|
|
IO_APIC_DEFAULT_ADDRESS - 1);
|
|
}
|
|
}
|
|
|
|
/* PAM */
|
|
static void mch_update_pam(MCHPCIState *mch)
|
|
{
|
|
PCIDevice *pd = PCI_DEVICE(mch);
|
|
int i;
|
|
|
|
memory_region_transaction_begin();
|
|
for (i = 0; i < 13; i++) {
|
|
pam_update(&mch->pam_regions[i], i,
|
|
pd->config[MCH_HOST_BRIDGE_PAM0 + ((i + 1) / 2)]);
|
|
}
|
|
memory_region_transaction_commit();
|
|
}
|
|
|
|
/* SMRAM */
|
|
static void mch_update_smram(MCHPCIState *mch)
|
|
{
|
|
PCIDevice *pd = PCI_DEVICE(mch);
|
|
bool h_smrame = (pd->config[MCH_HOST_BRIDGE_ESMRAMC] & MCH_HOST_BRIDGE_ESMRAMC_H_SMRAME);
|
|
uint32_t tseg_size;
|
|
|
|
/* implement SMRAM.D_LCK */
|
|
if (pd->config[MCH_HOST_BRIDGE_SMRAM] & MCH_HOST_BRIDGE_SMRAM_D_LCK) {
|
|
pd->config[MCH_HOST_BRIDGE_SMRAM] &= ~MCH_HOST_BRIDGE_SMRAM_D_OPEN;
|
|
pd->wmask[MCH_HOST_BRIDGE_SMRAM] = MCH_HOST_BRIDGE_SMRAM_WMASK_LCK;
|
|
pd->wmask[MCH_HOST_BRIDGE_ESMRAMC] = MCH_HOST_BRIDGE_ESMRAMC_WMASK_LCK;
|
|
}
|
|
|
|
memory_region_transaction_begin();
|
|
|
|
if (pd->config[MCH_HOST_BRIDGE_SMRAM] & SMRAM_D_OPEN) {
|
|
/* Hide (!) low SMRAM if H_SMRAME = 1 */
|
|
memory_region_set_enabled(&mch->smram_region, h_smrame);
|
|
/* Show high SMRAM if H_SMRAME = 1 */
|
|
memory_region_set_enabled(&mch->open_high_smram, h_smrame);
|
|
} else {
|
|
/* Hide high SMRAM and low SMRAM */
|
|
memory_region_set_enabled(&mch->smram_region, true);
|
|
memory_region_set_enabled(&mch->open_high_smram, false);
|
|
}
|
|
|
|
if (pd->config[MCH_HOST_BRIDGE_SMRAM] & SMRAM_G_SMRAME) {
|
|
memory_region_set_enabled(&mch->low_smram, !h_smrame);
|
|
memory_region_set_enabled(&mch->high_smram, h_smrame);
|
|
} else {
|
|
memory_region_set_enabled(&mch->low_smram, false);
|
|
memory_region_set_enabled(&mch->high_smram, false);
|
|
}
|
|
|
|
if (pd->config[MCH_HOST_BRIDGE_ESMRAMC] & MCH_HOST_BRIDGE_ESMRAMC_T_EN) {
|
|
switch (pd->config[MCH_HOST_BRIDGE_ESMRAMC] &
|
|
MCH_HOST_BRIDGE_ESMRAMC_TSEG_SZ_MASK) {
|
|
case MCH_HOST_BRIDGE_ESMRAMC_TSEG_SZ_1MB:
|
|
tseg_size = 1024 * 1024;
|
|
break;
|
|
case MCH_HOST_BRIDGE_ESMRAMC_TSEG_SZ_2MB:
|
|
tseg_size = 1024 * 1024 * 2;
|
|
break;
|
|
case MCH_HOST_BRIDGE_ESMRAMC_TSEG_SZ_8MB:
|
|
tseg_size = 1024 * 1024 * 8;
|
|
break;
|
|
default:
|
|
tseg_size = 1024 * 1024 * (uint32_t)mch->ext_tseg_mbytes;
|
|
break;
|
|
}
|
|
} else {
|
|
tseg_size = 0;
|
|
}
|
|
memory_region_del_subregion(mch->system_memory, &mch->tseg_blackhole);
|
|
memory_region_set_enabled(&mch->tseg_blackhole, tseg_size);
|
|
memory_region_set_size(&mch->tseg_blackhole, tseg_size);
|
|
memory_region_add_subregion_overlap(mch->system_memory,
|
|
mch->below_4g_mem_size - tseg_size,
|
|
&mch->tseg_blackhole, 1);
|
|
|
|
memory_region_set_enabled(&mch->tseg_window, tseg_size);
|
|
memory_region_set_size(&mch->tseg_window, tseg_size);
|
|
memory_region_set_address(&mch->tseg_window,
|
|
mch->below_4g_mem_size - tseg_size);
|
|
memory_region_set_alias_offset(&mch->tseg_window,
|
|
mch->below_4g_mem_size - tseg_size);
|
|
|
|
memory_region_transaction_commit();
|
|
}
|
|
|
|
static void mch_update_ext_tseg_mbytes(MCHPCIState *mch)
|
|
{
|
|
PCIDevice *pd = PCI_DEVICE(mch);
|
|
uint8_t *reg = pd->config + MCH_HOST_BRIDGE_EXT_TSEG_MBYTES;
|
|
|
|
if (mch->ext_tseg_mbytes > 0 &&
|
|
pci_get_word(reg) == MCH_HOST_BRIDGE_EXT_TSEG_MBYTES_QUERY) {
|
|
pci_set_word(reg, mch->ext_tseg_mbytes);
|
|
}
|
|
}
|
|
|
|
static void mch_write_config(PCIDevice *d,
|
|
uint32_t address, uint32_t val, int len)
|
|
{
|
|
MCHPCIState *mch = MCH_PCI_DEVICE(d);
|
|
|
|
pci_default_write_config(d, address, val, len);
|
|
|
|
if (ranges_overlap(address, len, MCH_HOST_BRIDGE_PAM0,
|
|
MCH_HOST_BRIDGE_PAM_SIZE)) {
|
|
mch_update_pam(mch);
|
|
}
|
|
|
|
if (ranges_overlap(address, len, MCH_HOST_BRIDGE_PCIEXBAR,
|
|
MCH_HOST_BRIDGE_PCIEXBAR_SIZE)) {
|
|
mch_update_pciexbar(mch);
|
|
}
|
|
|
|
if (ranges_overlap(address, len, MCH_HOST_BRIDGE_SMRAM,
|
|
MCH_HOST_BRIDGE_SMRAM_SIZE)) {
|
|
mch_update_smram(mch);
|
|
}
|
|
|
|
if (ranges_overlap(address, len, MCH_HOST_BRIDGE_EXT_TSEG_MBYTES,
|
|
MCH_HOST_BRIDGE_EXT_TSEG_MBYTES_SIZE)) {
|
|
mch_update_ext_tseg_mbytes(mch);
|
|
}
|
|
}
|
|
|
|
static void mch_update(MCHPCIState *mch)
|
|
{
|
|
mch_update_pciexbar(mch);
|
|
mch_update_pam(mch);
|
|
mch_update_smram(mch);
|
|
mch_update_ext_tseg_mbytes(mch);
|
|
}
|
|
|
|
static int mch_post_load(void *opaque, int version_id)
|
|
{
|
|
MCHPCIState *mch = opaque;
|
|
mch_update(mch);
|
|
return 0;
|
|
}
|
|
|
|
static const VMStateDescription vmstate_mch = {
|
|
.name = "mch",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.post_load = mch_post_load,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_PCI_DEVICE(parent_obj, MCHPCIState),
|
|
/* Used to be smm_enabled, which was basically always zero because
|
|
* SeaBIOS hardly uses SMM. SMRAM is now handled by CPU code.
|
|
*/
|
|
VMSTATE_UNUSED(1),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static void mch_reset(DeviceState *qdev)
|
|
{
|
|
PCIDevice *d = PCI_DEVICE(qdev);
|
|
MCHPCIState *mch = MCH_PCI_DEVICE(d);
|
|
|
|
pci_set_quad(d->config + MCH_HOST_BRIDGE_PCIEXBAR,
|
|
MCH_HOST_BRIDGE_PCIEXBAR_DEFAULT);
|
|
|
|
d->config[MCH_HOST_BRIDGE_SMRAM] = MCH_HOST_BRIDGE_SMRAM_DEFAULT;
|
|
d->config[MCH_HOST_BRIDGE_ESMRAMC] = MCH_HOST_BRIDGE_ESMRAMC_DEFAULT;
|
|
d->wmask[MCH_HOST_BRIDGE_SMRAM] = MCH_HOST_BRIDGE_SMRAM_WMASK;
|
|
d->wmask[MCH_HOST_BRIDGE_ESMRAMC] = MCH_HOST_BRIDGE_ESMRAMC_WMASK;
|
|
|
|
if (mch->ext_tseg_mbytes > 0) {
|
|
pci_set_word(d->config + MCH_HOST_BRIDGE_EXT_TSEG_MBYTES,
|
|
MCH_HOST_BRIDGE_EXT_TSEG_MBYTES_QUERY);
|
|
}
|
|
|
|
mch_update(mch);
|
|
}
|
|
|
|
static void mch_realize(PCIDevice *d, Error **errp)
|
|
{
|
|
int i;
|
|
MCHPCIState *mch = MCH_PCI_DEVICE(d);
|
|
|
|
if (mch->ext_tseg_mbytes > MCH_HOST_BRIDGE_EXT_TSEG_MBYTES_MAX) {
|
|
error_setg(errp, "invalid extended-tseg-mbytes value: %" PRIu16,
|
|
mch->ext_tseg_mbytes);
|
|
return;
|
|
}
|
|
|
|
/* setup pci memory mapping */
|
|
pc_pci_as_mapping_init(OBJECT(mch), mch->system_memory,
|
|
mch->pci_address_space);
|
|
|
|
/* if *disabled* show SMRAM to all CPUs */
|
|
memory_region_init_alias(&mch->smram_region, OBJECT(mch), "smram-region",
|
|
mch->pci_address_space, 0xa0000, 0x20000);
|
|
memory_region_add_subregion_overlap(mch->system_memory, 0xa0000,
|
|
&mch->smram_region, 1);
|
|
memory_region_set_enabled(&mch->smram_region, true);
|
|
|
|
memory_region_init_alias(&mch->open_high_smram, OBJECT(mch), "smram-open-high",
|
|
mch->ram_memory, 0xa0000, 0x20000);
|
|
memory_region_add_subregion_overlap(mch->system_memory, 0xfeda0000,
|
|
&mch->open_high_smram, 1);
|
|
memory_region_set_enabled(&mch->open_high_smram, false);
|
|
|
|
/* smram, as seen by SMM CPUs */
|
|
memory_region_init(&mch->smram, OBJECT(mch), "smram", 1ull << 32);
|
|
memory_region_set_enabled(&mch->smram, true);
|
|
memory_region_init_alias(&mch->low_smram, OBJECT(mch), "smram-low",
|
|
mch->ram_memory, 0xa0000, 0x20000);
|
|
memory_region_set_enabled(&mch->low_smram, true);
|
|
memory_region_add_subregion(&mch->smram, 0xa0000, &mch->low_smram);
|
|
memory_region_init_alias(&mch->high_smram, OBJECT(mch), "smram-high",
|
|
mch->ram_memory, 0xa0000, 0x20000);
|
|
memory_region_set_enabled(&mch->high_smram, true);
|
|
memory_region_add_subregion(&mch->smram, 0xfeda0000, &mch->high_smram);
|
|
|
|
memory_region_init_io(&mch->tseg_blackhole, OBJECT(mch),
|
|
&tseg_blackhole_ops, NULL,
|
|
"tseg-blackhole", 0);
|
|
memory_region_set_enabled(&mch->tseg_blackhole, false);
|
|
memory_region_add_subregion_overlap(mch->system_memory,
|
|
mch->below_4g_mem_size,
|
|
&mch->tseg_blackhole, 1);
|
|
|
|
memory_region_init_alias(&mch->tseg_window, OBJECT(mch), "tseg-window",
|
|
mch->ram_memory, mch->below_4g_mem_size, 0);
|
|
memory_region_set_enabled(&mch->tseg_window, false);
|
|
memory_region_add_subregion(&mch->smram, mch->below_4g_mem_size,
|
|
&mch->tseg_window);
|
|
object_property_add_const_link(qdev_get_machine(), "smram",
|
|
OBJECT(&mch->smram), &error_abort);
|
|
|
|
init_pam(DEVICE(mch), mch->ram_memory, mch->system_memory,
|
|
mch->pci_address_space, &mch->pam_regions[0],
|
|
PAM_BIOS_BASE, PAM_BIOS_SIZE);
|
|
for (i = 0; i < 12; ++i) {
|
|
init_pam(DEVICE(mch), mch->ram_memory, mch->system_memory,
|
|
mch->pci_address_space, &mch->pam_regions[i+1],
|
|
PAM_EXPAN_BASE + i * PAM_EXPAN_SIZE, PAM_EXPAN_SIZE);
|
|
}
|
|
}
|
|
|
|
uint64_t mch_mcfg_base(void)
|
|
{
|
|
bool ambiguous;
|
|
Object *o = object_resolve_path_type("", TYPE_MCH_PCI_DEVICE, &ambiguous);
|
|
if (!o) {
|
|
return 0;
|
|
}
|
|
return MCH_HOST_BRIDGE_PCIEXBAR_DEFAULT;
|
|
}
|
|
|
|
static Property mch_props[] = {
|
|
DEFINE_PROP_UINT16("extended-tseg-mbytes", MCHPCIState, ext_tseg_mbytes,
|
|
16),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void mch_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
k->realize = mch_realize;
|
|
k->config_write = mch_write_config;
|
|
dc->reset = mch_reset;
|
|
dc->props = mch_props;
|
|
set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
|
|
dc->desc = "Host bridge";
|
|
dc->vmsd = &vmstate_mch;
|
|
k->vendor_id = PCI_VENDOR_ID_INTEL;
|
|
k->device_id = PCI_DEVICE_ID_INTEL_Q35_MCH;
|
|
k->revision = MCH_HOST_BRIDGE_REVISION_DEFAULT;
|
|
k->class_id = PCI_CLASS_BRIDGE_HOST;
|
|
/*
|
|
* PCI-facing part of the host bridge, not usable without the
|
|
* host-facing part, which can't be device_add'ed, yet.
|
|
*/
|
|
dc->user_creatable = false;
|
|
}
|
|
|
|
static const TypeInfo mch_info = {
|
|
.name = TYPE_MCH_PCI_DEVICE,
|
|
.parent = TYPE_PCI_DEVICE,
|
|
.instance_size = sizeof(MCHPCIState),
|
|
.class_init = mch_class_init,
|
|
};
|
|
|
|
static void q35_register(void)
|
|
{
|
|
type_register_static(&mch_info);
|
|
type_register_static(&q35_host_info);
|
|
}
|
|
|
|
type_init(q35_register);
|