Greg Kurz 23ff81bdfd spapr: Simulate CAS for qtest ... The RTAS event hotplug code for machine types 2.8 and newer depends on the CAS negotiated ov5 in order to work properly. However, there's no CAS when running under qtest. There has been a tentative to trick the code by faking the OV5_HP_EVT bit, but it turned out to break other assumptions in the code and the change got reverted. Go for a more general approach and simulate a CAS when running under qtest. For simplicity, this pseudo CAS simple simulates the case where the guest supports the same features as the machine. It is done at reset time, just before we reset the DRCs, which could potentially exercise the unplug code. This allows to test unplug on spapr with both older and newer machine types. Suggested-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155146875704.147873.10563808578795890265.stgit@bahia.lan> Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>		2019-03-12 10:50:59 +11:00
..
e500-ccsr.h	ppc: do not use ../ in include files	2013-03-01 13:57:33 +01:00
e500.c	elf: Add optional function ptr to load_elf() to parse ELF notes	2019-02-05 16:50:16 +01:00
e500.h	platform-bus-device: use device plug callback instead of machine_done notifier	2018-05-10 18:10:56 +01:00
e500plat.c	hw/ppc: Use the IEC binary prefix definitions	2018-07-02 15:41:16 +02:00
fdt.c	target/ppc: Split page size information into a separate allocation	2018-04-27 18:05:22 +10:00
Kconfig	ppc: Express dependencies of the embedded machines with kconfig	2019-03-07 21:46:19 +01:00
mac_newworld.c	hw/boards: Add a MachineState parameter to kvm_type callback	2019-03-05 15:55:09 +00:00
mac_oldworld.c	hw/boards: Add a MachineState parameter to kvm_type callback	2019-03-05 15:55:09 +00:00
mac.h	macio: move MACIOIDEState type declarations to macio.h	2018-08-30 10:42:18 +10:00
Makefile.objs	hw/ppc/Makefile.objs: Build all boards conditinally with CONFIG_*	2019-02-05 16:50:20 +01:00
mpc8544_guts.c	shutdown: Add source information to SHUTDOWN and RESET	2017-05-23 13:28:17 +02:00
mpc8544ds.c	ppc: e500: switch E500 based machines to full machine definition	2018-04-27 18:05:23 +10:00
pnv_bmc.c	Include qapi/error.h exactly where needed	2018-02-09 13:50:17 +01:00
pnv_core.c	ppc/pnv: introduce a CPU machine_data	2019-02-04 18:44:18 +11:00
pnv_lpc.c	ppc/pnv: check size before data buffer access	2018-11-08 12:04:40 +11:00
pnv_occ.c	ppc/pnv: Add OCC model stub with interrupt support	2017-04-26 12:00:42 +10:00
pnv_psi.c	hw/ppc: Use object_initialize_child for correct reference counting	2019-02-26 09:21:25 +11:00
pnv_xscom.c	Include qapi/error.h exactly where needed	2018-02-09 13:50:17 +01:00
pnv.c	ppc/pnv: use IEC binary prefixes to represent sizes	2019-02-26 14:20:30 +11:00
ppc4xx_devs.c	ppc4xx: Pass array index to function instead of pointer into the array	2019-02-04 18:44:17 +11:00
ppc4xx_pci.c	ppc4xx_pci: convert SysBus init method to a realize method	2018-11-08 12:04:40 +11:00
ppc405_boards.c	ppc405_boards: use g_new(T, n) instead of g_malloc(sizeof(T) * n)	2018-12-21 09:24:23 +11:00
ppc405_uc.c	hw/ppc: Move ppc40x_*reset() functions from ppc405_uc.c to ppc.c	2019-02-04 18:44:18 +11:00
ppc405.h	ppc4xx: Export ECB and PLB emulation	2017-09-08 09:30:55 +10:00
ppc440_bamboo.c	elf: Add optional function ptr to load_elf() to parse ELF notes	2019-02-05 16:50:16 +01:00
ppc440_pcix.c	ppc440_pcix: convert SysBus init method to a realize method	2018-11-08 12:04:40 +11:00
ppc440_uc.c	ppc440: Avoid reporting error when reading non-existent RAM slot	2019-02-04 18:44:17 +11:00
ppc440.h	ppc440_uc: Basic emulation of PPC440 DMA controller	2018-07-03 09:56:52 +10:00
ppc_booke.c	hw/ppc: Don't include m48t59.h if it is not necessary	2019-02-04 18:44:20 +11:00
ppc.c	target/ppc: Add POWER9 external interrupt model	2019-02-26 09:21:24 +11:00
ppce500_spin.c	hw/ppc: Use the IEC binary prefix definitions	2018-07-02 15:41:16 +02:00
prep_systemio.c	prep: add PReP System I/O	2017-01-31 10:10:13 +11:00
prep.c	hw/ppc/prep: Drop useless inclusion of "hw/i386/pc.h"	2019-02-17 21:54:02 +11:00
rs6000_mc.c	hw/ppc: Use the IEC binary prefix definitions	2018-07-02 15:41:16 +02:00
sam460ex.c	i2c: Split smbus into parts	2019-02-27 21:06:08 -06:00
spapr_caps.c	ppc/spapr_caps: Add SPAPR_CAP_NESTED_KVM_HV	2018-11-08 13:08:35 +11:00
spapr_cpu_core.c	spapr: move the interrupt presenters under machine_data	2019-02-04 18:44:18 +11:00
spapr_drc.c	spapr: add hotplug hooks for PHB hotplug	2019-02-26 09:21:25 +11:00
spapr_events.c	spapr_events: add support for phb hotplug events	2019-02-26 09:21:25 +11:00
spapr_hcall.c	target/ppc: Rename PATB/PATBE -> PATE	2019-02-26 09:21:25 +11:00
spapr_iommu.c	qemu/queue.h: leave head structs anonymous unless necessary	2019-01-11 15:46:55 +01:00
spapr_irq.c	spapr_irq: Expose the phandle of the interrupt controller	2019-02-26 09:21:25 +11:00
spapr_ovec.c	spapr: support memory unplug for qtest	2019-02-26 09:21:25 +11:00
spapr_pci_vfio.c	Include qapi/error.h exactly where needed	2018-02-09 13:50:17 +01:00
spapr_pci.c	qdev: Let the hotplug_handler_unplug() caller delete the device	2019-03-06 11:51:08 -03:00
spapr_rng.c	hw/ppc/spapr_rng: Introduce CONFIG_SPAPR_RNG switch for spapr_rng.c	2018-11-08 12:04:40 +11:00
spapr_rtas_ddw.c	spapr-iommu: Always advertise the maximum possible DMA window size	2018-12-21 09:37:38 +11:00
spapr_rtas.c	target/ppc/spapr: Set LPCR:HR when using Radix mode	2019-02-26 09:21:25 +11:00
spapr_rtc.c	qapi: move RTC_CHANGE to the target schema	2019-02-18 14:44:05 +01:00
spapr_vio.c	spapr: Rename xics to intc in interrupt controller agnostic code	2019-02-17 21:54:02 +11:00
spapr.c	spapr: Simulate CAS for qtest	2019-03-12 10:50:59 +11:00
trace-events	ppc/spapr: Receive and store device tree blob from SLOF	2019-01-09 09:28:13 +11:00
virtex_ml507.c	hw: Remove unused 'hw/devices.h' include	2019-03-07 22:16:11 +01:00