No need to do it in the configure file if it is only used for a help message.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just make EFI_AARCH64 a variable in the makefile that defaults to the efi
firmware included with QEMU. It can be redefined on the "make" command
line.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By removing some unnest-vars calls, we miss some directory creation
that may be required by some/dir/object.d.
This will go away once everything is converted to Meson.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With Makefiles that have automatically generated dependencies, you
generated includes are set as dependencies of the Makefile, so that they
are built before everything else and they are available when first
building the .c files.
Alternatively you can use a fine-grained dependency, e.g.
target/arm/translate.o: target/arm/decode-neon-shared.inc.c
With Meson you have only one choice and it is a third option, namely
"build at the beginning of the corresponding target"; the way you
express it is to list the includes in the sources of that target.
The problem is that Meson decides if something is a source vs. a
generated include by looking at the extension: '.c', '.cc', '.m', '.C'
are sources, while everything else is considered an include---including
'.inc.c'.
Use '.c.inc' to avoid this, as it is consistent with our other convention
of using '.rst.inc' for included reStructuredText files. The editorconfig
file is adjusted.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make it independent from the rules.mak, and clean up to use pattern rules.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson build scripts will only include qemu-fuzz-TARGET rules if configured
with --enable-fuzzing, and that takes care of adding -fsanitize=fuzzer.
Therefore we can just specify the configure option and stop modifying
the CFLAGS and CONFIG_FUZZ options in the "make" invocation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix abort when running a backup job on an image whose size is not
aligned to the backup job's cluster size
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl8yZPcSHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AzsMIAMCapgITYAakNx8tC02YShFYCzwQxt90
N/+gyMXR1pZ48j1Ui4gCCRU2XJvbUIxfwzO2K0H432mkg4Y7fwIyJx7BOmDMyiNs
NPWSMN6/ORZz0dIHwb0Days9vJMsLnuUmc6FmGaVsAyBa6pDFNfkX0GCQQURKags
jvOp7fPsOrX65SCHv/UIlhooo1z3+7VCN6BQNPNz2bWv4UBpi5nZhXxZFagzT1/l
zJ5MbIe+5yQcTkSgOoNNTAIP4XZHQPXpGx7nPTyK/trOGigCM8aVLB0vffUoEJfJ
hFKjKODJsRJTL9IlTnqdUdqoYT8GJpzqzTLRf+TrOCA/vOZkwuqIyp4=
=iw8l
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-08-11' into staging
Block patches for 5.1.0-rc4:
- Fix abort when running a backup job on an image whose size is not
aligned to the backup job's cluster size
# gpg: Signature made Tue 11 Aug 2020 10:29:27 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-08-11:
iotests: add test for unaligned granularity bitmap backup
block/block-copy: always align copied region to cluster size
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add 5.2 machine types for arm/i440fx/q35/s390x/spapr.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200819144016.281156-1-cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
If a management application (like Libvirt) want's to preserve
migration ability and switch to '-machine memory-backend' it
needs to set exactly the same RAM id as QEMU would. Since the id
is machine type dependant, expose it under 'query-machines'
result. Some machine types don't have the attribute set (riscv
family for example), therefore the QMP attribute must be
optional.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <9384422f63fe594a54d801f9cb4539b1d2ce9b67.1590481402.git.mprivozn@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
[ehabkost: updated doc to "since 5.2"]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Due to 1.14 release being delayed it missed qemu 5.1.
The last snapshot has all code changes though, so this
changes only the version string in the binaries.
shortlog
========
Kevin O'Connor (1):
docs: Note v1.14.0 release
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since commit 61f20b9dc5 ("spapr_nvram: Pre-initialize the NVRAM to
support the -prom-env parameter"), pseries machines can pre-initialize
the "system" partition in the NVRAM with the data passed to all -prom-env
parameters on the QEMU command line.
In this case it is assumed that all the data fits in 64 KiB, but the user
can easily pass more and crash QEMU:
$ qemu-system-ppc64 -M pseries $(for ((x=0;x<128;x++)); do \
echo -n " -prom-env " ; printf "%0.sx" {1..1024}; \
done) # this requires ~128 Kib
malloc(): corrupted top size
Aborted (core dumped)
This happens because we don't check if all the prom-env data fits in
the NVRAM and chrp_nvram_set_var() happily memcpy() it passed the
buffer.
This crash affects basically all ppc/ppc64 machine types that use -prom-env:
- pseries (all versions)
- g3beige
- mac99
and also sparc/sparc64 machine types:
- LX
- SPARCClassic
- SPARCbook
- SS-10
- SS-20
- SS-4
- SS-5
- SS-600MP
- Voyager
- sun4u
- sun4v
Add a max_len argument to chrp_nvram_create_system_partition() so that
it can check the available size before writing to memory.
Since NVRAM is populated at machine init, it seems reasonable to consider
this error as fatal. So, instead of reporting an error when we detect that
the NVRAM is too small and adapt all machine types to handle it, we simply
exit QEMU in all cases. This is still better than crashing. If someone
wants another behavior, I guess this can be reworked later.
Tested with:
$ yes q | \
(for arch in ppc ppc64 sparc sparc64; do \
echo == $arch ==; \
qemu=${arch}-softmmu/qemu-system-$arch; \
for mach in $($qemu -M help | awk '! /^Supported/ { print $1 }'); do \
echo $mach; \
$qemu -M $mach -monitor stdio -nodefaults -nographic \
$(for ((x=0;x<128;x++)); do \
echo -n " -prom-env " ; printf "%0.sx" {1..1024}; \
done) >/dev/null; \
done; echo; \
done)
Without the patch, affected machine types cause QEMU to report some
memory corruption and crash:
malloc(): corrupted top size
free(): invalid size
*** stack smashing detected ***: terminated
With the patch, QEMU prints the following message and exits:
NVRAM is too small. Try to pass less data to -prom-env
It seems that the conditions for the crash have always existed, but it
affects pseries, the machine type I care for, since commit 61f20b9dc5
only.
Fixes: 61f20b9dc5 ("spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameter")
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1867739
Reported-by: John Snow <jsnow@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159736033937.350502.12402444542194031035.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Polling only monitors the ctx->notified field and does not need the
ctx->notifier EventNotifier to be signalled. Keep ctx->aio_notify_me
disabled while polling to avoid unnecessary EventNotifier syscalls.
This optimization improves virtio-blk 4KB random read performance by
18%. The following results are with an IOThread and the null-co block
driver:
Test IOPS Error
Before 244518.62 ± 1.20%
After 290706.11 ± 0.44%
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200806131802.569478-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
aio_notify() does not set ctx->notified when called with
ctx->aio_notify_me disabled. Therefore aio_notify_me needs to be enabled
during polling.
This is suboptimal since expensive event_notifier_set(&ctx->notifier)
and event_notifier_test_and_clear(&ctx->notifier) calls are required
when ctx->aio_notify_me is enabled.
Change aio_notify() so that aio->notified is always set, regardless of
ctx->aio_notify_me. This will make polling cheaper since
ctx->aio_notify_me can remain disabled. Move the
event_notifier_test_and_clear() to the fd handler function (which is now
no longer an empty function so "dummy" has been dropped from its name).
The next patch takes advantage of this by optimizing polling in
util/aio-posix.c.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200806131802.569478-3-stefanha@redhat.com
[Paolo Bonzini pointed out that the smp_wmb() in aio_notify_accept()
should be smp_wb() but the comment should be smp_wmb() instead of
smp_wb(). Fixed.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The event_notifier_*() prefix can be confused with the EventNotifier
APIs that are also called event_notifier_*().
Rename the functions to aio_context_notifier_*() to make it clear that
they relate to the AioContext::notifier field.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200806131802.569478-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that kvmppc_xive_cpu_get_state() returns negative on error, use that
and get rid of the temporary Error object and error_propagate().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707852916.1489912.8376334685349668124.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that kvmppc_xive_cpu_connect() returns a negative errno on failure,
use that and get rid of the local_err boilerplate.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707852234.1489912.16410314514265848075.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that all these functions return a negative errno on failure, check
that and get rid of the local_err boilerplate.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707851537.1489912.1030839306195472651.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that kvmppc_xive_cpu_get_state() and kvmppc_xive_cpu_set_state()
return negative errnos on failures, use that instead local_err because
it is the recommended practice. Also return that instead of -1 since
vmstate expects negative errnos.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707850840.1489912.14912810818646455474.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that all these functions return a negative errno on failure, check
that because it is preferred to local_err. And most of all, propagate it
because vmstate expects negative errnos.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707850148.1489912.18355118622296682631.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that kvmppc_xive_get_queues() returns a negative errno on failure, check
with that because it is preferred to local_err. And most of all, propagate
it because vmstate expects negative errnos.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707849455.1489912.6034461176847728064.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since kvm_device_access() returns a negative errno on failure, convert
kvmppc_xive_set_source_config() to use it for error checking. This allows
to get rid of the local_err boilerplate.
Propagate the return value so that callers may use it as well to check
failures.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707848764.1489912.17078842252160674523.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since kvmppc_xive_get_queue_config() has a return value, convert
kvmppc_xive_get_queues() to use it for error checking. This allows
to get rid of the local_err boiler plate.
Propagate the return value so that callers may use it as well to check
failures.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707848069.1489912.14879208798696134531.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since kvm_device_access() returns a negative errno on failure, convert
kvmppc_xive_get_queue_config() and kvmppc_xive_set_queue_config() to
use it for error checking. This allows to get rid of the local_err
boilerplate.
Propagate the return value so that callers may use it as well to check
failures.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707847357.1489912.2032291280645236480.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
kvm_set_one_reg() returns a negative errno on failure, use that instead
of errno. Also propagate it to callers so they can use it to check
for failures and hopefully get rid of their local_err boilerplate.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707846665.1489912.14267225652103441921.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Callers currently check failures of kvmppc_xive_mmap() through the
@errp argument, which isn't a recommanded practice. It is preferred
to use a return value when possible.
Since NULL isn't an invalid address in theory, it seems better to
return MAP_FAILED and to teach callers to handle it.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707845972.1489912.719896767746375765.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since kvmppc_xive_source_reset_one() has a return value, convert
kvmppc_xive_source_reset() to use it for error checking. This
allows to get rid of the local_err boiler plate.
Propagate the return value so that callers may use it as well to check
failures.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707845245.1489912.9151822670764690034.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use error_setg_errno() instead of error_setg(strerror()). While here,
use -ret instead of errno since kvm_vcpu_enable_cap() returns a negative
errno on failure.
Use ERRP_GUARD() to ensure that errp can be passed to error_append_hint(),
and get rid of the local_err boilerplate.
Propagate the return value so that callers may use it as well to check
failures.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159707844549.1489912.4862921680328017645.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The spapr_phb_realize() function has a local_err variable which
is used to:
1) check failures of spapr_irq_findone() and spapr_irq_claim()
2) prepend extra information to the error message
Recent work from Markus Armbruster highlighted we get better
code when testing the return value of a function, rather than
setting up all the local_err boiler plate. For similar reasons,
it is now preferred to use ERRP_GUARD() and error_prepend()
rather than error_propagate_prepend().
Since spapr_irq_findone() and spapr_irq_claim() return negative
values in case of failure, do both changes.
This is just cleanup, no functional impact.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <159707843851.1489912.6108405733810934642.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All callers guard these functions with an xive_in_kernel() helper. Make
it clear that they are only to be called when the KVM XIVE device exists.
Note that the check on xive is dropped in kvmppc_xive_disconnect(). It
really cannot be NULL since it comes from set_active_intc() which only
passes pointers to allocated objects.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <159679994169.876294.11026653581505077112.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Calls to the KVM XIVE device are guarded by kvm_irqchip_in_kernel(). This
ensures that QEMU won't try to use the device if KVM is disabled or if
an in-kernel irqchip isn't required.
When using ic-mode=dual with the pseries machine, we have two possible
interrupt controllers: XIVE and XICS. The kvm_irqchip_in_kernel() helper
will return true as soon as any of the KVM device is created. It might
lure QEMU to think that the other one is also around, while it is not.
This is exactly what happens with ic-mode=dual at machine init when
claiming IRQ numbers, which must be done on all possible IRQ backends,
eg. RTAS event sources or the PHB0 LSI table : only the KVM XICS device
is active but we end up calling kvmppc_xive_source_reset_one() anyway,
which fails. This doesn't cause any trouble because of another bug :
kvmppc_xive_source_reset_one() lacks an error_setg() and callers don't
see the failure.
Most of the other kvmppc_xive_* functions have similar xive->fd
checks to filter out the case when KVM XIVE isn't active. It
might look safer to have idempotent functions but it doesn't
really help to understand what's going on when debugging.
Since we already have all the kvm_irqchip_in_kernel() in place,
also have the callers to check xive->fd as well before calling
KVM XIVE specific code. This is straight-forward for the spapr
specific XIVE code. Some more care is needed for the platform
agnostic XIVE code since it cannot access xive->fd directly.
Introduce new in_kernel() methods in some base XIVE classes
for this purpose and implement them only in spapr.
In all cases, we still need to call kvm_irqchip_in_kernel() so that
compilers can optimize the kvmppc_xive_* calls away when CONFIG_KVM
isn't defined, thus avoiding the need for stubs.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159679993438.876294.7285654331498605426.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Depending on whether XIVE is emultated or backed with a KVM XIVE device,
the ESB MMIOs of a XIVE source point to an I/O memory region or a mapped
memory region.
This is currently handled by checking kvm_irqchip_in_kernel() returns
false in xive_source_realize(). This is a bit awkward as we usually
need to do extra things when we're using the in-kernel backend, not
less. But most important, we can do better: turn the existing "xive.esb"
memory region into a plain container, introduce an "xive.esb-emulated"
I/O subregion and rename the existing "xive.esb" subregion in the KVM
code to "xive.esb-kvm". Since "xive.esb-kvm" is added with overlap
and a higher priority, it prevails over "xive.esb-emulated" (ie.
a guest using KVM XIVE will interact with "xive.esb-kvm" instead of
the default "xive.esb-emulated" region.
While here, consolidate the computation of the MMIO region size in
a common helper.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159679992680.876294.7520540158586170894.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently if option '-icount auto' is passed to the QEMU TCG to enable
counting instructions the VM crashes with the following error report when
Linux runs on it:
qemu-system-ppc64: Bad icount read
This happens because read/write access to the SPRs PURR, VTB, and TBU40
is not integrated to the icount framework.
This commit fixes that issue by making the read/write access of these
SPRs aware of icount framework, adding the proper gen_io_start() calls
before calling the helpers to load/store these SPRs in TCG and ensuring
that the associated TBs end immediately after, accordingly to what's in
docs/devel/tcg-icount.rst.
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Message-Id: <20200811153235.4527-1-gromero@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The kernel and initrd hashes seem to have changed for the Bionic
aarch64 installer, causing BootLinuxConsole.test_aarch64_xlnx_versal_virt
to fail. Correct the paths to use the previous binaries instead of
the latest. Do the same for the Lenny alpha installer for
consistency, even though those are unlikely to change.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200810092941.154911-1-pbonzini@redhat.com>
Both files refer to the same directory. Store the common part in
a new variable.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200810093050.28744-2-philmd@redhat.com>
As we just fixed a severe performance issue with Treaddir request
handling, clarify this overall issue as a comment on
v9fs_co_run_in_worker() with the intention to hopefully prevent
such performance mistakes in future (and fixing other yet
outstanding ones).
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <4d34d332e1aaa8a2cf8dc0b5da4fd7727f2a86e8.1596012787.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Previous patch suggests that it might make sense to use a different mutex
type now while handling readdir requests, depending on the precise
protocol variant, as v9fs_do_readdir_with_stat() (used by 9P2000.u) uses
a CoMutex to avoid deadlocks that might happen with QemuMutex otherwise,
whereas do_readdir_many() (used by 9P2000.L) should better use a
QemuMutex, as the precise behaviour of a failed CoMutex lock on fs driver
side would not be clear.
And to avoid the wrong lock type being used, be now strict and error out
if a 9P2000.L client sends a Tread on a directory, and likeweise error out
if a 9P2000.u client sends a Treaddir request.
This patch is just intended as transitional measure, as currently 9P2000.u
vs. 9P2000.L implementations currently differ where the main logic of
fetching directory entries is located at (9P2000.u still being more top
half focused, while 9P2000.L already being bottom half focused in regards
to fetching directory entries that is).
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <9a2ddc347e533b0d801866afd9dfac853d2d4106.1596012787.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Make top half really top half and bottom half really bottom half:
Each T_readdir request handling is hopping between threads (main
I/O thread and background I/O driver threads) several times for
every individual directory entry, which sums up to huge latencies
for handling just a single T_readdir request.
Instead of doing that, collect now all required directory entries
(including all potentially required stat buffers for each entry) in
one rush on a background I/O thread from fs driver by calling the
previously added function v9fs_co_readdir_many() instead of
v9fs_co_readdir(), then assemble the entire resulting network
response message for the readdir request on main I/O thread. The
fs driver is still aborting the directory entry retrieval loop
(on the background I/O thread inside of v9fs_co_readdir_many())
as soon as it would exceed the client's requested maximum R_readdir
response size. So this will not introduce a performance penalty on
another end.
Also: No longer seek initial directory position in v9fs_readdir(),
as this is now handled (more consistently) by
v9fs_co_readdir_many() instead.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <c7c3d1cf4e86611538cef44897842819d9359d7a.1596012787.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The newly added function v9fs_co_readdir_many() retrieves multiple
directory entries with a single fs driver request. It is intended to
replace uses of v9fs_co_readdir(), the latter only retrieves a
single directory entry per fs driver request instead.
The reason for this planned replacement is that for every fs driver
request the coroutine is dispatched from main I/O thread to a
background I/O thread and eventually dispatched back to main I/O
thread. Hopping between threads adds latency. So if a 9pfs Treaddir
request reads a large amount of directory entries, this currently
sums up to huge latencies of several hundred ms or even more. So
using v9fs_co_readdir_many() instead of v9fs_co_readdir() will
provide significant performance improvements.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <73dc827a12ef577ae7e644dcf34a5c0e443ab42f.1596012787.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The implementation of v9fs_co_readdir() has two parts: the outer
part is executed by main I/O thread, whereas the inner part is
executed by fs driver on a background I/O thread.
Move the inner part to its own new, private function do_readdir(),
so it can be shared by another upcoming new function.
This is just a preparatory patch for the subsequent patch, with the
purpose to avoid the next patch to clutter the overall diff.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <a426ee06e77584fa2d8253ce5d8bea519eb3ffd4.1596012787.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Rename function v9fs_readdir_data_size() -> v9fs_readdir_response_size()
and make it callable from other units. So far this function is only
used by 9p.c, however subsequent patches require the function to be
callable from another 9pfs unit. And as we're at it; also make it clear
for what this function is used for.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <3668ebc7d5b929a0e4f1357457060d96f50f76f4.1596012787.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The previous, already existing 'basic' readdir test simply used a
'count' parameter big enough to retrieve all directory entries with a
single Treaddir request.
In the 3 new 'split' readdir tests added by this patch, directory
entries are retrieved, split over several Treaddir requests by picking
small 'count' parameters which force the server to truncate the
response. So the test client sends as many Treaddir requests as
necessary to get all directory entries.
The following 3 new tests are added (executed in this sequence):
1. Split readdir test with count=512
2. Split readdir test with count=256
3. Split readdir test with count=128
This test case sequence is chosen because the smaller the 'count' value,
the higher the chance of errors in case of implementation bugs on server
side.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <569b2e05ab1d0223b14a12dfbdf3ad5e8b3ac131.1596012787.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Since this function begins with:
/* The KVM XIVE device is not in use */
if (!xive || xive->fd == -1) {
return;
}
we obviously don't need to check xive->fd again.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159673297296.766512.14780055521619233656.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If the creation of the KVM XIVE device fails for some reasons, the
negative errno ends up in xive->fd, but the rest of the code assumes
that xive->fd either contains an open fd, ie. positive value, or -1.
This doesn't cause any misbehavior except kvmppc_xive_disconnect()
that will try to close(xive->fd) during rollback and likely be
rewarded with an EBADF.
Only set xive->fd with a open fd.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159673296585.766512.15404407281299745442.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
