In float64_to_uint64_round_to_zero() a typo meant that we were
taking the uint64_t return value from float64_to_uint64() and
putting it into an int64_t variable before returning it as
uint64_t again. Use uint64_t instead of pointlessly casting it
back and forth to int64_t.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The current implementation of the mincore(2) syscall sets errno to
EFAULT when the region identified by the first two parameters is
invalid.
This goes against the man page specification, where mincore(2) should
only fail with EFAULT when the third parameter is an invalid address;
and fail with ENOMEM when the checked region does not point to mapped
memory.
Signed-off-by: Franklin "Snaipe" Mathieu <snaipe@diacritic.io>
Cc: Riku Voipio <riku.voipio@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170217085800.28873-2-snaipe@diacritic.io>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
do_rt_sigreturn uses an uninitialised local variable instead of fetching
the old signal mask directly from the signal frame when restoring the mask,
so the signal mask is undefined after do_rt_sigreturn. As the signal
frame data is in target-endian order, target_to_host_sigset instead of
target_to_host_sigset_internal is required.
do_sigreturn is correct in using target_to_host_sigset_internal, because
get_user already did the endianness conversion.
Signed-off-by: Michael Karcher <karcher@physik.fu-berlin.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170225110517.2832-3-laurent@vivier.eu>
Use cpu_m68k_get_ccr()/cpu_m68k_set_ccr() to setup and restore correctly
the value of SR in the ucontext structure
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170225110517.2832-2-laurent@vivier.eu>
Note that x86_64 has only _rt signal handlers. This implementation
attempts to share code with the x86_32 implementation.
CC: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Allan Wirth <awirth@akamai.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170226165345.8757-1-bobby.prani@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since commit 5ea2fc8 ("linux-user: Sanity check clone flags"),
trying to run fork() fails with old distro on some architectures.
This is the case with HP-PA and Debian 5 (Lenny).
It fails on:
if ((flags & CSIGNAL) != TARGET_SIGCHLD) {
return -TARGET_EINVAL;
}
because flags is 17, whereas on HP-PA, SIGCHLD is 18.
17 is the SIGCHLD value of my host (x86_64).
It appears that for TARGET_NR_fork and TARGET_NR_vfork, QEMU calls
do_fork() with SIGCHLD instead of TARGET_SIGCHLD.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170216173707.16209-1-laurent@vivier.eu>
int64_t is in all likelihood the actual scalar type we want.
Yep, really.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1219541
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
This keeps the same results on type=static expansion, but make
type=full expansion return every single QOM property on the CPU
object that have a different value from the "base' CPU model,
plus all the CPU feature flag properties.
Cc: Jiri Denemark <jdenemar@redhat.com>
Message-Id: <20170222190029.17243-4-ehabkost@redhat.com>
Tested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Implement query-cpu-model-expansion for target-i386.
This should meet all the requirements while being simple. In the
case of static expansion, it will use the new "base" CPU model,
and in the case of full expansion, it will keep the original CPU
model name+props, and append extra properties.
A future follow-up should improve the implementation of
type=full, so that it returns more detailed data, including every
writable QOM property in the CPU object.
Cc: libvir-list@redhat.com
Cc: Jiri Denemark <jdenemar@redhat.com>
Message-Id: <20170222190029.17243-3-ehabkost@redhat.com>
Tested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The query-cpu-model-expand QMP command needs at least one static
model, to allow the "static" expansion mode to be implemented.
Instead of defining static versions of every CPU model, define a
"base" CPU model that has absolutely no feature flag enabled.
Despite having no CPUID data set at all, "-cpu base" is even a
functional CPU:
* It can boot a Slackware Linux 1.01 image with a Linux 0.99.12
kernel[1].
* It is even possible to boot[2] a modern Fedora x86_64 guest by
manually enabling the following CPU features:
-cpu base,+lm,+msr,+pae,+fpu,+cx8,+cmov,+sse,+sse2,+fxsr
[1] http://www.qemu-advent-calendar.org/2014/#day-1
[2] This is what can be seen in the guest:
[root@localhost ~]# cat /proc/cpuinfo
processor : 0
vendor_id : unknown
cpu family : 0
model : 0
model name : 00/00
stepping : 0
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu msr pae cx8 cmov fxsr sse sse2 lm nopl
bugs :
bogomips : 5832.70
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
[root@localhost ~]# x86info -v -a
x86info v1.30. Dave Jones 2001-2011
Feedback to <davej@redhat.com>.
No TSC, MHz calculation cannot be performed.
Unknown vendor (0)
MP Table:
Family: 0 Model: 0 Stepping: 0
CPU Model (x86info's best guess):
eax in: 0x00000000, eax = 00000001 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x00000001, eax = 00000000 ebx = 00000800 ecx = 00000000 edx = 07008161
eax in: 0x80000000, eax = 80000001 ebx = 00000000 ecx = 00000000 edx = 00000000
eax in: 0x80000001, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 20000000
Feature flags:
fpu Onboard FPU
msr Model-Specific Registers
pae Physical Address Extensions
cx8 CMPXCHG8 instruction
cmov CMOV instruction
fxsr FXSAVE and FXRSTOR instructions
sse SSE support
sse2 SSE2 support
Long NOPs supported: yes
Address sizes : 0 bits physical, 0 bits virtual
0MHz processor (estimate).
running at an estimated 0MHz
[root@localhost ~]#
Message-Id: <20170222190029.17243-2-ehabkost@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Host CPUID info is used by the "max" CPU model only in KVM mode.
Move the initialization of CPUID data for "max" from class_init
to instance_init, and don't set CPUClass::cpu_def for "max".
Message-Id: <20170222183919.11928-4-ehabkost@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of reporting host CPUID data on "max", use the qemu64 CPU
model as reference to initialize CPUID
vendor/family/model/stepping/model-id.
Message-Id: <20170222183919.11928-3-ehabkost@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Rename the existing "host" CPU model to "max, and set it to
kvm_enabled=false. The new "max" CPU model will be able to enable
all features supported by TCG out of the box, because its logic
is based on x86_cpu_get_supported_feature_word(), which already
works with TCG.
A new KVM-specific "host" class was added, that simply inherits
everything from "max" except the 'ordering' and 'description'
fields.
Message-Id: <20170222183919.11928-2-ehabkost@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a note warning that static expansion may not be 100% accurate
when the CPU model is not migration-safe. This will be the case
on x86 when expansing the "host" CPU model, because there are
"host" features that can't have a migration-safe representation
(e.g. "host-cache-info").
Message-Id: <20170116211124.29245-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
CPU runnability checks and CPU model expansion have slightly
different requirements. Document the steps involved in loading a
CPU model and realizing a CPU, so their requirements and purpose
are clearly defined.
This patch doesn't change any implementation. It just add
comments, rename the x86_cpu_load_features() function for clarity
(so it won't be confused with x86_cpu_load_def()), and move
x86_cpu_filter_features() closer to it.
Message-Id: <20170116211124.29245-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Rename the field and add a small comment to make its purpose
clearer.
Message-Id: <20170119210449.11991-4-ehabkost@redhat.com>
Tested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of using kvm_enabled to order the "-cpu help" list, use a
new "ordering" field for that.
Message-Id: <20170119210449.11991-3-ehabkost@redhat.com>
Tested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The class is now safe because the assert(kvm_enabled()) line was
removed by commit e435601058.
Message-Id: <20170119210449.11991-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
XkbGetKeyboard does not work in XWayland and even on non-Wayland
X11 servers its use is discouraged:
https://bugs.freedesktop.org/show_bug.cgi?id=89240
This resolves a problem whereby QEMU prints
"could not lookup keycode name"
on startup when running under XWayland. Keymap handling is
however still broken after this commit, since Xwayland is
reporting a keymap we can't handle
"unknown keycodes `(unnamed)', please report to qemu-devel@nongnu.org"
NB, native Wayland support (which is the default under GTK3) is
not affected - only XWayland (which can be requested with GDK_BACKEND
on GTK3, and is the only option for GTK2).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170227132343.30824-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Helper function (and DisplayChangeListenerOps ptr) to disable scanouts.
Replaces using dpy_gl_scanout_texture with 0x0 size and no texture
specified.
Allows cleanups to make the io and gfx emulation code more readable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487669841-13668-3-git-send-email-kraxel@redhat.com
We'll add a variant which accepts dmabufs soon. Change
the name so we can easily disturgish the two variants.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487669841-13668-2-git-send-email-kraxel@redhat.com
nodes[id].next is written by other threads. If atomic_read is not used
(matching atomic_set in mcs_mutex_lock!) the compiler can optimize the
whole "if" away!
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Greg Kurz <groug@kaod.org>
Message-id: 20170227111726.9237-1-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that all bottom halves and callbacks take care of taking the
AioContext lock, we can migrate some users away from it and to a
specific QemuMutex or CoMutex.
Protect libiscsi calls with a QemuMutex. Callbacks are invoked
using bottom halves, so we don't even have to drop it around
callback invocations.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170222180725.28611-4-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that all bottom halves and callbacks take care of taking the
AioContext lock, we can migrate some users away from it and to a
specific QemuMutex or CoMutex.
Protect libnfs calls with a QemuMutex. Callbacks are invoked
using bottom halves, so we don't even have to drop it around
callback invocations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170222180725.28611-3-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Crypto routines 'qcrypto_cipher_get_block_len' and
'qcrypto_cipher_get_key_len' return non-zero cipher block and key
lengths from static arrays 'alg_block_len[]' and 'alg_key_len[]'
respectively. Returning 'zero(0)' value from either of them would
likely lead to an error condition.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On error path, the 'salt' doesn't been freed thus leading
a memory leak. This patch avoid this.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Now that all bottom halves and callbacks take care of taking the
AioContext lock, we can migrate some users away from it and to a
specific QemuMutex or CoMutex.
Protect BDRVCURLState access with a QemuMutex.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170222180725.28611-2-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
nodes[id].next is written by other threads. If atomic_read is not used
(matching atomic_set in mcs_mutex_lock!) the compiler can optimize the
whole "if" away!
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Greg Kurz <groug@kaod.org>
Message-id: 20170227111726.9237-1-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJYs072AAoJEDNgw/dBGhJfJNMH/iPNHzrZLRilU6CceYpNQW1Z
262rITUXBZ04vVhNjdIU6OZDjD12eY67eznfapsNNJPSNNR7UUMa8dymFZfBxgRL
Kl9jciJKhWUBdzn8qkvP2umXA9I6NZs+OJbSz8vIYVEX8mF8EaYNLGP40J+4qc+X
2GByZRu5yoYe5Ex1hNgdzPGPlyvJwymu0y7WW0gDPCrKtSSGz7NRGA9S2dvbFGQb
kNnkkS2aEkbt8fDWsTkcKVog3jFNfBzdEYUJel237+dMqnepFt5V1UWFANznb7Xp
pmdOWYhWntvi8ONwJW+RRWe4Mes2ySfqelmVD602dreuIRkX1bHBWkXA3S8pSmM=
=2VrG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/artyom/tags/pull-sun4v-20170226' into staging
Pull request for Niagara patches 2017 02 26
# gpg: Signature made Sun 26 Feb 2017 21:56:06 GMT
# gpg: using RSA key 0x3360C3F7411A125F
# gpg: Good signature from "Artyom Tarasenko <atar4qemu@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2AD8 6149 17F4 B2D7 05C0 BB12 3360 C3F7 411A 125F
* remotes/artyom/tags/pull-sun4v-20170226:
niagara: check if a serial port is available
niagara: fail if a firmware file is missing
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
fail if a firmware file is missing and not qtest_enabled(),
the later is necessary to allow some basic tests if
firmware is not available
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Coverity points out (CID 1005725) that an error-exit path in tcp_listen()
will try to close(s) even if the reason it got there was that the
qemu_socket() failed and s was never opened. Not only that, this isn't even
the right function to use, because we need closesocket() to do the right
thing on Windows. Change to using the right function and only calling it if
needed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
The mbuf code currently doesn't check the result of doing a malloc()
or realloc() of its data (spotted by Coverity, CID 1238946).
Since the m_inc() API assumes that extending an mbuf must succeed,
just convert to g_malloc() and g_free().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Check the return value from qemu_socket() rather than trying to
pass it to bind() as an fd argument even if it's negative.
This wouldn't have caused any negative consequences, because
it won't be a valid fd number and the bind call will fail;
but Coverity complains (CID 1005723).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=OYgF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Fri 24 Feb 2017 18:08:26 GMT
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
tests: Use opened block node for block job tests
vvfat: Use opened node as backing file
block: Add bdrv_new_open_driver()
block: Factor out bdrv_open_driver()
block: Use BlockBackend for image probing
block: Factor out bdrv_open_child_bs()
block: Attach bs->file only during .bdrv_open()
block: Pass BdrvChild to bdrv_truncate()
mirror: Resize active commit base in mirror_run()
qcow2: Use BB for resizing in qcow2_amend_options()
blockdev: Use BlockBackend to resize in qmp_block_resize()
iotests: Fix another race in 030
qemu-img: Improve documentation for PREALLOC_MODE_FALLOC
qemu-img: Truncate before full preallocation
qemu-img: Add tests for raw image preallocation
qemu-img: Do not truncate before preallocation
qemu-iotests: redirect nbd server stdout to /dev/null
qemu-iotests: add ability to exclude certain protocols from tests
qemu-iotests: Test 137 only supports 'file' protocol
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CHanges:
* Add the Boston board with fixing the make check issue on 32-bit hosts.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)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=xOs6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/yongbok/tags/mips-20170224-2' into staging
MIPS patches 2017-02-24-2
CHanges:
* Add the Boston board with fixing the make check issue on 32-bit hosts.
# gpg: Signature made Fri 24 Feb 2017 11:43:45 GMT
# gpg: using RSA key 0x2238EB86D5F797C2
# gpg: Good signature from "Yongbok Kim <yongbok.kim@imgtec.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 8600 4CF5 3415 A5D9 4CFA 2B5C 2238 EB86 D5F7 97C2
* remotes/yongbok/tags/mips-20170224-2:
hw/mips: MIPS Boston board support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
