There is a possibility that SPI controller can get into loop due to indefinite
RDR match failures. Hence put a limit to failures and stop the sequencer.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250303141328.23991-5-chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Create a spi buses with distinct names on each socket so that responders
are attached to correct SPI controllers.
Change the bus name to chipX.spi.<busnum> where X = 0..<num_sockets>
QOM tree on a 2 socket machine:
(qemu) info qom-tree
/machine (powernv10-machine)
/chip[0] (power10_v2.0-pnv-chip)
/pib_spic[0] (pnv-spi)
/chip0.spi.0 (SSI)
/xscom-spi[0] (memory-region)
/chip[1] (power10_v2.0-pnv-chip)
/pib_spic[0] (pnv-spi)
/chip1.spi.0 (SSI)
/xscom-spi[0] (memory-region)
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Message-ID: <20250303141328.23991-4-chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Use a local variable seq_index instead of repeatedly calling
get_seq_index() method and open-code next_sequencer_fsm().
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250303141328.23991-3-chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In PnvXferBuffer dynamically allocating and freeing is a
process overhead. Hence used an existing Fifo8 buffer with
capacity of 16 bytes.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Message-ID: <20250303141328.23991-2-chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Added new test for pool interrupts. Removed all printfs from pnv-xive2-* qtests.
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Change all printf() in pnv-xive2-* qtests to g_test_message()
[npiggin: split from pool qtest]
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
When processing a backlog scan for group interrupts, also take
into account crowd interrupts.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The blk/index in some paths may refer to an NVP or an NVGC. When it
is not known ahead of time, use the nvx_ prefix to prevent confusion.
[npiggin: split out of larger fix patch and reworded]
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
XIVE crowd sizes are encoded into a 2-bit field as follows:
0: 0b00
2: 0b01
4: 0b10
16: 0b11
A crowd size of 8 is not supported.
If an END is defined with the 'crowd' bit set, then a target can be
running on different blocks. It means that some bits from the block
VP are masked when looking for a match. It is similar to groups, but
on the block instead of the VP index.
Most of the changes are due to passing the extra argument 'crowd' all
the way to the function checking for matches.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add support for the NVPG and NVC BARs. Access to the BAR pages will
cause backlog counter operations to either increment or decriment
the counter.
Also added qtests for the same.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add XIVE2 tests for group interrupts and group interrupts that have
been backlogged.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
When the hypervisor or OS pushes a new value to the CPPR, if the LSMFB
value is lower than the new CPPR value, there could be a pending group
interrupt in the backlog, so it needs to be scanned.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
When pushing an OS context, we were already checking if there was a
pending interrupt in the IPB and sending a notification if needed. We
also need to check if there is a pending group interrupt stored in the
NVG table. To avoid useless backlog scans, we only scan if the NVP
belongs to a group.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
When a group interrupt cannot be delivered, we need to:
- increment the backlog counter for the group in the NVG table
(if the END is configured to keep a backlog).
- start a broadcast operation to set the LSMFB field on matching CPUs
which can't take the interrupt now because they're running at too
high a priority.
[npiggin: squash in fixes from milesg]
[milesg: only load the NVP if the END is !ignore]
[milesg: always broadcast backlog, not only when there are precluded VPs]
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
If an END has the 'i' bit set (ignore), then it targets a group of
VPs. The size of the group depends on the VP index of the target
(first 0 found when looking at the least significant bits of the
index) so a mask is applied on the VP index of a running thread to
know if we have a match.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The NSR has a (so far unused) grouping level field. When a interrupt
is presented, that field tells the hypervisor or OS if the interrupt
is for an individual VP or for a VP-group/crowd. This patch reworks
the presentation API to allow to set/unset the level when
raising/accepting an interrupt.
It also renames xive_tctx_ipb_update() to xive_tctx_pipr_update() as
the IPB is only used for VP-specific target, whereas the PIPR always
needs to be updated.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Rename to follow the convention of the other function names.
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
If the 'H' attribute is set on the NVP structure, the hardware
automatically saves and restores some attributes from the TIMA in the
NVP structure.
The group-specific attributes LSMFB, LGS and T have an extra flag to
individually control what is saved/restored.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The default PNOR image is erased and not recognised by skiboot, so NVRAM
gets disabled. This change adds a tiny pnor file that is a proper FFS
image with a formatted NVRAM partition. This is recognised by skiboot and
will persist across machine reboots.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The BMC HIOMAP PNOR access protocol has certain limits on PNOR addresses
and sizes. Add some sanity checks for these so we don't get strange
behaviour.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
skiboot has a bug that does not handle ISA FW access correctly for IDSEL
devices > 0, and the current PNOR default address and size puts 64MB in
device 0 and 64MB in device 1, which causes skiboot to hit this bug and
breaks PNOR accesses.
Move the PNOR address down to 0 for now, so a 256MB PNOR can be accessed
via device 0.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
LPC FW address space is a 256MB (28-bit) region to one of 16-devices
that are selected with the IDSEL register. Implement this by making
the ISA FW address space 4GB, and move the 256MB OPB alias within
that space according to IDSEL.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
If nothing responds to an LPC access, the LPC host controller should
set an IRQSTAT error. Model this behaviour.
skiboot uses this error to "probe" LPC accesses, among other things to
determine if a SuperIO chip is present. After this change it recognizes
there is no SuperIO present and does not keep trying to access it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The LPC model has only supported serirqs (ISA device IRQs), however
there are internal sources that can raise other interrupts. Update the
device to handle these interrupt sources.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Linux power management code accesses these registers for pstate
management. Wire up a very simple implementation.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
After OCC fixes in QEMU pnv model and skiboot (since they have suffered
some bitrot), Linux will start performing PM SPR accesses. This is a
very simple implementation that makes it a bit happier.
Thanks,
Nick
The OCC is an On Chip Controller that handles various thermal and power
management. It is a PPC405 microcontroller that runs its own firmware
which is out of scope of the powernv machine model. Some dynamic
behaviour and interfaces that are important for host CPU testing can be
implemented with a much simpler state machine.
This change adds a 100ms timer that ticks through a simple state machine
that looks for "OCC command requests" coming from host firmware, and
responds to them.
For now the powercap command is implemented because that is used by
OPAL and exported to Linux and is easy to test.
$ F=/sys/firmware/opal/powercap/system-powercap/powercap-current
$ cat $F
100
$ echo 50 | sudo tee $F
50
$ cat $F
50
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
OCC pstate frequencies are in kHz, so the OCC data was 3-4MHz. Upgrade
to GHz. Make each pstate have a different frequency.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The HOMER is a region of memory used by host and firmware and
microconrollers. It has very little logic by itself, just some BAR
registers. Users of this memory should operate on it rather than
have HOMER implement them with MMIO registers, which is not the
right model.
This change switches the implementation of HOMER from MMIO to RAM,
and moves the OCC register implementation to in-memory structure
accesses performed by the OCC model.
This has the downside that access to unimplemented regions of HOMER
are no longer flagged. Perhaps that could be done by adding a memory
region for HOMER, and ram subregions under that for each implemented
part. But for now this takes the simpler approach.
Note: This brings some data structure definitions from skiboot, which
does not match QEMU coding style but is not changed to make comparisons
and updates simpler.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Use defines for the OCCMISC register bits, and add a comment about the
IRQ request bit, which QEMU may not model quite correctly.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Put HOMER memory region base and size into the class, to allow more
code-reuse between different machines in later changes.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The commit to fix the OCC common area sensor mappings didn't update the
register offsets to match.
Before this change, skiboot reports:
[ 0.347100086,3] OCC: Chip 0 sensor data invalid
Afterward, there is no error and the sensor_groups directory appears
under /sys/firmware/opal/.
The SLW_IMAGE_BASE address looks like a workaround to intercept firmware
memory accesses, but that does not seem to be required now (and would
have been broken by the OCC common area region mapping change anyway).
So it can be removed.
Fixes: 3a1b70b66b ("ppc/pnv: Fix OCC common area region mapping")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
HOMER memory implements some dummy registers that return a nonsense
value to satisfy skiboot accesses caused by "SLW" init and register
save/restore programming that has never worked under QEMU:
[ 0.265000943,3] SLW: Failed to set HRMOR for CPU 0,RC=0x1
[ 0.265356988,3] Disabling deep stop states
To simplify a later change to implement HOMER as a RAM area, make
these return zero, which has the same result.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The HOMER OCC registers seem to have bitrotted and fail for various
reasons on powernv8, 9, and 10.
The major problems are that POWER8 has the wrong version value and its
pstate ordering is incorrect. POWER9/10 have not set the OCC state to
active. Non-zero chips are also set to OCC slaves for POWER9/10.
Unfortunately skiboot has also bitrotted and requires fixes that are
not yet in the bios files to run. With a patched skiboot, before this
change, powernv9/10 report:
[ 0.262050394,3] OCC: Chip: 0: OCC not active
[ 0.262128603,3] OCC: Initialization on all chips did not complete(timed out)
powernv8 reports:
[ 0.173572100,3] OCC: Unknown OCC-OPAL interface version.
[ 0.173812059,3] OCC: Initialization on all chips did not complete(timed out)
After this patch, all report:
[ 0.176815668,5] OCC: All Chip Rdy after 0 ms
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Each non-core chiplet on a chip has a "pervasive chiplet" unit and its
xscom register set. This adds support for PHB4/5.
skiboot reads the CPLT_CONF1 register in __phb4/5_get_max_link_width(),
which shows up as unimplemented xscom reads. Set a value in PCI CONF1
register's link-width field to demonstrate skiboot doing something
interesting with it.
In the bigger picture, it might be better to model the pervasive
chiplet type as parent that each non-core chiplet model derives from.
For now this is enough to get the PHB registers implemented and working
for skiboot, and provides a second example (after the N1 chiplet) that
will help if the design is reworked as such.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This adds TPM pass through API.
Also, moves SLOF from github to gitlab.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This skiboot firmware importantly contains updates for HOMER/OCC bugs.
These subsystems have bitrotted in QEMU and skiboot and this update
allows new QEMU models to be exercised.
Power11 support is also added. This model is not yet merged in QEMU,
but firmware support will make development and testing simpler.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ref405ep machine is scheduled for removal in QEMU 10.0. Keep the
405 CPU implementation for a while because it is theoretically
possible to model the power management (OCC) co-processor found on the
IBM POWER [8-11] processors.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250204080649.836155-4-clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The ref405ep machine is the only PPC 405 machine. Drop all support by
removing the SoC and associated devices as-well as the machine.
Link: https://lore.kernel.org/qemu-devel/20250110141800.1587589-3-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250204080649.836155-3-clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Since we are about to remove all support for PPC 405, start by
removing the tests referring to the ref405ep machine.
Link: https://lore.kernel.org/qemu-devel/20250110141800.1587589-2-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250204080649.836155-2-clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
create_backend()'s caller catches QAPIError, and returns non-zero exit
code on catch. The caller's caller passes the exit code to
sys.exit().
create_backend() doesn't care: it reports errors to stderr and
sys.exit()s.
Change it to raise QAPIError instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250311065352.992307-1-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since I've just about rewritten the entirety of the QAPI documentation
system, it's probably fair that I be the contact point for if it goes
awry.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-64-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Who documents the documentation?
Me, I guess.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-63-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We are not enabling the transmogrifier for QSD or QGA yet because we
don't (yet) have a way to create separate indices, and all of the
definitions will bleed together, which isn't so nice.
For now, QMP is better than nothing at all!
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-62-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next patch will engage the qapidoc transmogrifier, which creates a
lot of cross-reference targets. Some of the existing targets
("migration", "qom", "replay") will become ambiguous as a result. Nail
them down more explicitly to prevent ambiguous cross-reference warnings.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-61-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Parser and doc generator cooperate on generating stub documentation for
undocumented members. The parser makes up an ArgSection with an empty
description, and the doc generator makes up a description.
Right now, the made-up ArgSections go into doc.args. However, the new
doc generator uses .all_sections, not .args. So put them into
.all_sections, too.
Insert them right after existing 'member' sections. If there are none,
insert directly after the leading section.
Doesn't affect the old generator, because that one doesn't use
.all_sections.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-60-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rewritten]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Presently, we never have any empty text entries for members. The next
patch will explicitly generate such sections, so enable support for it
in advance.
The parser will generate placeholder sections to indicate undocumented
members, but it's the qapidoc generator that's responsible for deciding
what to do with that stub section.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-59-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
[Tweak the stub section text]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add "the members of ..." pointers to Members and Arguments lists where
appropriate, with clickable cross-references - so it's a slight
improvement over the old system :)
This patch is meant to be a temporary solution until we can review and
merge the inliner.
The implementation of this patch is a little bit of a hack: Sphinx is
not designed to allow you to mix fields of different "type"; i.e. mixing
member descriptions and free-form text under the same heading. To
accomplish this with a minimum of hackery, we technically document a
"dummy field" and then just strip off the documentation for that dummy
field in a post-processing step. We use the "q_dummy" variable for this
purpose, then strip it back out before final processing. If this
processing step should fail, you'll see warnings for a bad
cross-reference. (So if you don't see any, it must be working!)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-58-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add debugging output for the qapidoc transmogrifier - setting DEBUG=1
will produce .ir files (one for each qapidoc directive) that write the
generated rst file to disk to allow for easy debugging and verification
of the generated document.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-57-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add support for the special QAPI doc syntax to process @references as
``preformatted text``. At the moment, there are no actual
cross-references for individual members, so there is nothing to link
against. For now, process it identically to how we did in the old
qapidoc system.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250311034303.75779-56-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
