This patch starts an IBM Power8+ compatible PMU implementation by adding
the representation of PMU events that we are going to sample,
PMUEventType. This enum represents a Perf event that is being sampled by
a specific counter 'sprn'. Events that aren't available (i.e. no event
was set in MMCR1) will be of type 'PMU_EVENT_INVALID'. Events that are
inactive due to frozen counter bits state are of type
'PMU_EVENT_INACTIVE'. Other types added in this patch are
PMU_EVENT_CYCLES and PMU_EVENT_INSTRUCTIONS. More types will be added
later on.
Let's also add the required PMU cycle overflow timers. They will be used
to trigger cycle overflows when cycle events are being sampled. This
timer will call cpu_ppc_pmu_timer_cb(), which in turn calls
fire_PMC_interrupt(). Both functions are stubs that will be implemented
later on when EBB support is added.
Two new helper files are created to host this new logic.
cpu_ppc_pmu_init() will init all overflow timers during CPU init time.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211201151734.654994-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Adapt the fields offset in the board information for Linux. Since
Linux relies on the CPU frequency value, I wonder how it ever worked.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211206103712.1866296-15-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The board information for the 405EP first appeared in commit 04f20795ac
("Move PowerPC 405 specific definitions into a separate file ...")
An Ethernet address is a 6 byte number. Fix that.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206103712.1866296-14-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
These values are computed and updated by U-Boot at startup. Use them
as defaults to improve direct Linux boot.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211206103712.1866296-13-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The machine can already boot with kernel and initrd U-boot images if a
firmware is loaded first. Adapt and improve the load sequence to let
the machine boot directly from a Linux kernel ELF image and a usual
initrd image if a firmware image is not provided. For that, install a
custom CPU reset handler to setup the registers and to start the CPU
from the Linux kernel entry point.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211206103712.1866296-12-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This routine is a small helper to cleanup the code. The update of the
flash fields were removed because there are not of any use when booting
from a Linux kernel image. It should be functionally equivalent.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211206103712.1866296-11-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
QEMU installs a custom U-Boot in-memory descriptor to share board
information with Linux, which means that the QEMU machine was
initially designed to support booting Linux directly without using the
loaded FW. But, it's not that simple because the CPU still starts at
address 0xfffffffc where nothing is currently mapped. Support must
have been broken these last years.
Since we can not find a "ppc405_rom.bin" firmware file, request one to
be specified on the command line. A consequence of this change is that
the machine can be booted directly from Linux without any FW being
loaded. This is still broken and the CPU start address will be fixed
in the next changes.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211206103712.1866296-10-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
It is currently impossible to find a "ppc405_rom.bin" firmware file or
a full flash image for the PPC405EP evalution board. Even if it should
be technically possible to recreate such an image, it's unlikely that
anyone will do it since the board is obsolete and support in QEMU has
been broken for about 10 years.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211206103712.1866296-9-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
I will be useful to rework the boot from Linux.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211206103712.1866296-7-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
It was introduced in commit b8d3f5d126 ("Add flags to support
PowerPC 405 bootinfos variations.") but since its value has always
been set to '1'.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206103712.1866296-6-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
and one error message to a LOG_GUEST_ERROR.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211206103712.1866296-5-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PPC 405 CPU is a system-on-a-chip, so all 405 machines are very similar,
except for some external periphery. However, the periphery of the 'taihu'
machine is hardly emulated at all (e.g. neither the LCD nor the USB part had
been implemented), so there is not much value added by this board. The users
can use the 'ref405ep' machine to test their PPC405 code instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211203164904.290954-2-thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211206103712.1866296-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The default addresses to load the kernel, fdt, initrd of AMCC boards
in U-Boot v2015.10 are :
"kernel_addr_r=1000000\0"
"fdt_addr_r=1800000\0"
"ramdisk_addr_r=1900000\0"
The taihu is one of these boards, the ref405ep is not but we don't
have much information on it and both boards have a very similar
address space layout.
Also, if loaded at address 0, U-Boot will partially overwrite the
uImage because of a bug in get_ram_size() (U-Boot v2015.10) not
restoring properly the probed RAM contents and because the exception
vectors are installed in the same range. Finally, a gzipped kernel
image will be uncompressed at 0x0. These are all good reasons for not
mappping a kernel image at this address.
Change the kernel load address to match U-Boot expectations and fix
loading.
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211202191446.1292125-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211206103712.1866296-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Setting -uuid in the pnv machine does not work:
./qemu-system-ppc64 -machine powernv8,accel=tcg -uuid 7ff61ca1-a4a0-4bc1-944c-abd114a35e80
qemu-system-ppc64: error creating device tree: (fdt_property_string(fdt, "system-id", buf)): FDT_ERR_BADSTATE
This happens because we're using fdt_property_string(), which is a
sequential write function that is supposed to be used when we're
building a new FDT, in a case where read/writing into an existing FDT.
Fix it by using fdt_setprop_string() instead.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211207094858.744386-1-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
If one tries to use -machine powernv9,accel=kvm in a Power9 host, a
cryptic error will be shown:
qemu-system-ppc64: Register sync failed... If you're using kvm-hv.ko, only "-cpu host" is possible
qemu-system-ppc64: kvm_init_vcpu: kvm_arch_init_vcpu failed (0): Invalid argument
Appending '-cpu host' will throw another error:
qemu-system-ppc64: invalid chip model 'host' for powernv9 machine
The root cause is that in IBM PowerPC we have different specs for the bare-metal
and the guests. The bare-metal follows OPAL, the guests follow PAPR. The kernel
KVM modules presented in the ppc kernels implements PAPR. This means that we
can't use KVM accel when using the powernv machine, which is the emulation of
the bare-metal host.
All that said, let's give a more informative error in this case.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20211130133153.444601-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PCIe extended configuration space on the device is not currently
accessible to the host. if by default, it is still inaccessible for
conventional for PCIe buses, add the current flag
PCI_BUS_EXTENDED_CONFIG_SPACE on the root bus permits PCI-E extended
config space access.
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211109145053.43524-1-clombard@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The ivshmem device, as with most PCI devices, uses little endian byte
order. However, the endianness of its mmio_ops is marked as
DEVICE_NATIVE_ENDIAN. This presents not only the usual problems with big
endian hosts but also with PowerPC little endian hosts as well, since
the Power architecture in QEMU uses big endian hardware (XIVE controller,
PCI Host Bridges, etc) even if the host is in little endian byte order.
As it is today, the IVPosition of the device will be byte swapped when
running in Power BE and LE. This can be seen by changing the existing
qtest 'ivshmem-test' to run in ppc64 hosts and printing the IVPOSITION
regs in test_ivshmem_server() right after the VM ids assert. For x86_64
the VM id values read are '0' and '1', for ppc64 (tested in a Power8
RHEL 7.9 BE server) and ppc64le (tested in a Power9 RHEL 8.6 LE server)
the ids will be '0' and '0x1000000'.
Change this device to LITTLE_ENDIAN fixes the issue for Power hosts of
both endianness, and every other big-endian architecture that might use
this device, without impacting x86 users.
Fixes: cb06608e17 ("ivshmem: convert to memory API")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/168
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211124092948.335389-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The mac.h header defines a MAX_CPUS macro. This is confusingly named,
because it suggests it's a generic setting, but in fact it's used
by only the g3beige and mac99 machines. It's also using a single
macro for two values which aren't inherently the same -- if one
of these two machines was updated to support SMP configurations
then it would want a different max_cpus value to the other.
Since the macro is used in only two places, just expand it out
and get rid of it. If hypothetical future work to support SMP
in these boards needs a compile-time-known limit on the number
of CPUs, we can give it a suitable name at that point.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211105184216.120972-1-peter.maydell@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
TYPE_AVR_CPU inherits TYPE_CPU, which itself inherits TYPE_DEVICE.
TYPE_DEVICE instances are realized using qdev_realize(), we don't
need to access QOM internal values.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Message-Id: <20211205224109.322152-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The DTSM is a mask that specifies which I/O Address Translation designation
types are supported. Today QEMU only supports DT=1.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20211203142706.427279-5-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We may have gotten a measurement update interval from the underlying host
via vfio -- Use it to set the interval via which we update the function
measurement block.
Fixes: 28dc86a072 ("s390x/pci: use a PCI Group structure")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20211203142706.427279-4-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Instead use the values from clp info, they will either be the hard-coded
values or what came from the host driver via vfio.
Fixes: 9670ee7527 ("s390x/pci: use a PCI Function structure")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20211203142706.427279-3-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* add support for KVM_GUESTDBG_BLOCKIRQ (Maxim)
* update linux-headers to Linux 5.16 (myself)
* configure cleanups (myself)
* lsi53c895a assertion failure fix (Philippe)
* fix incorrect description for die-id (Yanan)
* support for NUMA in SGX enclave memory (Yang Zhong)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmG5yEgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOFkwf9Glt3tnHfO/gWZectiMAjjM8vg3cR
yEsWU0fa0iu8MO8NiOW0b6DT0yosZ8rl2SYSZBQGqwa/Lq2MZLO2v0JG4LblBom7
WVmzNOG4t0OFoE2gwMlZ2J+ppaHV5zN1Yc6lMXOVQcefY0pXoyze+0Fq/cwKf2+p
6WDZTuOpjtxMwt9n71b93kNAHagk422MpNi1xi+o37hNsm/Zh3BTtaSJ7WCkCmWq
YmwwQZgyB/V0Ah42wchuf5zxEnQPMbjaQSu8jQU4iyCB7+2biBuh3Cqw5eR8tqC1
cGNINGlo2Orl9ASyEunHyuDj8p0wN8J37wNuBo4kghhrTVsVKQYF0wmsqw==
=U1Xy
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* improve compatibility for macOS scripts/entitlement.sh (Evan)
* add support for KVM_GUESTDBG_BLOCKIRQ (Maxim)
* update linux-headers to Linux 5.16 (myself)
* configure cleanups (myself)
* lsi53c895a assertion failure fix (Philippe)
* fix incorrect description for die-id (Yanan)
* support for NUMA in SGX enclave memory (Yang Zhong)
# gpg: Signature made Wed 15 Dec 2021 02:49:44 AM PST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [unknown]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
configure: remove dead variables
doc: Add the SGX numa description
numa: Support SGX numa in the monitor and Libvirt interfaces
numa: Enable numa for SGX EPC sections
kvm: add support for KVM_GUESTDBG_BLOCKIRQ
gdbstub, kvm: let KVM report supported singlestep flags
gdbstub: reject unsupported flags in handle_set_qemu_sstep
linux-headers: update to 5.16-rc1
virtio-gpu: do not byteswap padding
scripts/entitlement.sh: Use backward-compatible cp flags
qapi/machine.json: Fix incorrect description for die-id
tests/qtest: Add fuzz-lsi53c895a-test
hw/scsi/lsi53c895a: Do not abort when DMA requested and no data queued
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* ITS: error reporting cleanup
* aspeed: improve documentation
* Fix STM32F2XX USART data register readout
* allow emulated GICv3 to be disabled in non-TCG builds
* fix exception priority for singlestep, misaligned PC, bp, etc
* Correct calculation of tlb range invalidate length
* npcm7xx_emc: fix missing queue_flush
* virt: Add VIOT ACPI table for virtio-iommu
* target/i386: Use assert() to sanity-check b1 in SSE decode
* Don't include qemu-common unnecessarily
-----BEGIN PGP SIGNATURE-----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=KuTi
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20211215' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* ITS: error reporting cleanup
* aspeed: improve documentation
* Fix STM32F2XX USART data register readout
* allow emulated GICv3 to be disabled in non-TCG builds
* fix exception priority for singlestep, misaligned PC, bp, etc
* Correct calculation of tlb range invalidate length
* npcm7xx_emc: fix missing queue_flush
* virt: Add VIOT ACPI table for virtio-iommu
* target/i386: Use assert() to sanity-check b1 in SSE decode
* Don't include qemu-common unnecessarily
# gpg: Signature made Wed 15 Dec 2021 02:39:37 AM PST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20211215' of https://git.linaro.org/people/pmaydell/qemu-arm: (33 commits)
tests/acpi: add expected blob for VIOT test on virt machine
tests/acpi: add expected blobs for VIOT test on q35 machine
tests/acpi: add test case for VIOT
tests/acpi: allow updates of VIOT expected data files
hw/arm/virt: Use object_property_set instead of qdev_prop_set
hw/arm/virt: Reject instantiation of multiple IOMMUs
hw/arm/virt: Remove device tree restriction for virtio-iommu
hw/arm/virt-acpi-build: Add VIOT table for virtio-iommu
hw/net: npcm7xx_emc fix missing queue_flush
target/arm: Correct calculation of tlb range invalidate length
hw/arm: Don't include qemu-common.h unnecessarily
target/rx/cpu.h: Don't include qemu-common.h
target/hexagon/cpu.h: don't include qemu-common.h
include/hw/i386: Don't include qemu-common.h in .h files
target/i386: Use assert() to sanity-check b1 in SSE decode
tests/tcg: Add arm and aarch64 pc alignment tests
target/arm: Suppress bp for exceptions with more priority
target/arm: Assert thumb pc is aligned
target/arm: Take an exception if PC is misaligned
target/arm: Split compute_fsr_fsc out of arm_deliver_fault
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
The aspeed machines connects backends with drive_get_next() in several
counting loops, one of them in a helper function, and a conditional.
Change it to use drive_get() directly. This makes the unit numbers
explicit in the code.
Cc: "Cédric Le Goater" <clg@kaod.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-13-armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
Machine "xlnx-zcu102" connects backends with drive_get_next() in two
counting loops, one of them in a helper function. Change it to use
drive_get() directly. This makes the unit numbers explicit in the
code.
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Alistair Francis <alistair@alistair23.me>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-12-armbru@redhat.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
Machine "xlnx-zcu102" connects backends with drive_get_next() in
several counting loops. Change it to use drive_get() directly. This
makes the unit numbers explicit in the code.
Cc: Alistair Francis <alistair@alistair23.me>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-11-armbru@redhat.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
To propagate errors to the caller of the pre_plug callback, use the
object_poperty_set*() functions directly instead of the qdev_prop_set*()
helpers.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20211210170415.583179-5-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We do not support instantiating multiple IOMMUs. Before adding a
virtio-iommu, check that no other IOMMU is present. This will detect
both "iommu=smmuv3" machine parameter and another virtio-iommu instance.
Fixes: 70e89132c9 ("hw/arm/virt: Add the virtio-iommu device tree mappings")
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20211210170415.583179-4-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtio-iommu is now supported with ACPI VIOT as well as device tree.
Remove the restriction that prevents from instantiating a virtio-iommu
device under ACPI.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20211210170415.583179-3-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a virtio-iommu is instantiated, describe it using the ACPI VIOT
table.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20211210170415.583179-2-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The rx_active boolean change to true should always trigger a try_read
call that flushes the queue.
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20211203221002.1719306-1-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A lot of C files in hw/arm include qemu-common.h when they don't
need anything from it. Drop the include lines.
omap1.c, pxa2xx.c and strongarm.c retain the include because they
use it for the prototype of qemu_get_timedate().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-id: 20211129200510.1233037-5-peter.maydell@linaro.org
The TYPE_ARM_GICV3 device is an emulated one. When using
KVM, it is recommended to use the TYPE_KVM_ARM_GICV3 device
(which uses in-kernel support).
When using --with-devices-FOO, it is possible to build a
binary with a specific set of devices. When this binary is
restricted to KVM accelerator, the TYPE_ARM_GICV3 device is
irrelevant, and it is desirable to remove it from the binary.
Therefore introduce the CONFIG_ARM_GIC_TCG Kconfig selector
which select the files required to have the TYPE_ARM_GICV3
device, but also allowing to de-select this device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20211115223619.2599282-3-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
gicv3_set_gicv3state() is used by arm_gicv3_common.c in
arm_gicv3_common_realize(). Since we want to restrict
arm_gicv3_cpuif.c to TCG, extract gicv3_set_gicv3state()
to a new file. Add this file to the meson 'specific'
source set, since it needs access to "cpu.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20211115223619.2599282-2-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix issue where the data register may be overwritten by next character
reception before being read and returned.
Signed-off-by: Olivier Hériveaux <olivier.heriveaux@ledger.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211128120723.4053-1-olivier.heriveaux@ledger.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While trying to debug a GIC ITS failure I saw some guest errors that
had poor formatting as well as leaving me confused as to what failed.
As most of the checks aren't possible without a valid dte split that
check apart and then check the other conditions in steps. This avoids
us relying on undefined data.
I still get a failure with the current kvm-unit-tests but at least I
know (partially) why now:
Exception return from AArch64 EL1 to AArch64 EL1 PC 0x40080588
PASS: gicv3: its-trigger: inv/invall: dev2/eventid=20 now triggers an LPI
ITS: MAPD devid=2 size = 0x8 itt=0x40430000 valid=0
INT dev_id=2 event_id=20
process_its_cmd: invalid command attributes: invalid dte: 0 for 2 (MEM_TX: 0)
PASS: gicv3: its-trigger: mapd valid=false: no LPI after device unmap
SUMMARY: 6 tests, 1 unexpected failures
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20211112170454.3158925-1-alex.bennee@linaro.org
Cc: Shashi Mallela <shashi.mallela@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
Machine "petalogix-ml605" connects backends with drive_get_next() in a
counting loop. Change it to use drive_get() directly. This makes the
unit numbers explicit in the code.
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-10-armbru@redhat.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
Machine "xlnx-versal-virt" connects backends with drive_get_next() in
a counting loop. Change it to use drive_get() directly. This makes
the unit numbers explicit in the code.
Cc: Alistair Francis <alistair@alistair23.me>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-9-armbru@redhat.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
Machine "mcimx7d-sabre" connects backends with drive_get_next() in a
counting loop. Change it to use drive_get() directly. This makes the
unit numbers explicit in the code.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-8-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
Machine "mcimx6ul-evk" connects backends with drive_get_next() in a
counting loop. Change it to use drive_get() directly. This makes the
unit numbers explicit in the code.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jean-Christophe Dubois <jcd@tribudubois.net>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-7-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
Machine "imx25-pdk" connects backends with drive_get_next() in a
counting loop. Change it to use drive_get() directly. This makes the
unit numbers explicit in the code.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jean-Christophe Dubois <jcd@tribudubois.net>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-6-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
The versatile and vexpress machines ("versatileab", "versatilepb",
"vexpress-a9", "vexpress-a15") connect just one or two backends of a
type with drive_get_next(). Change them to use drive_get() directly.
This makes the unit numbers explicit in the code.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-5-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
Machine "quanta-gbs-bmc" connects just one backend with
drive_get_next(), but with a helper function. Change it to use
drive_get() directly. This makes the unit numbers explicit in the
code.
Cc: Havard Skinnemoen <hskinnemoen@google.com>
Cc: Tyrone Ting <kfting@nuvoton.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-4-armbru@redhat.com>
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
A number of machines connect just one backend with drive_get_next().
Change them to use drive_get() directly. This makes the (zero) unit
number explicit in the code.
Cc: Beniamino Galvani <b.galvani@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Cc: Niek Linnenbank <nieklinnenbank@gmail.com>
Cc: Andrew Baumann <Andrew.Baumann@microsoft.com>
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Cc: Jean-Christophe Dubois <jcd@tribudubois.net>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Artyom Tarasenko <atar4qemu@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: qemu-arm@nongnu.org
Cc: qemu-riscv@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-3-armbru@redhat.com>
ssi_sd_realize() creates an "sd-card" device. This is inappropriate,
and marked FIXME.
Move it to the boards that create these devices. Prior art: commit
eb4f566bbb for device "generic-sdhci", and commit 26c607b86b for
device "pl181".
The device remains not user-creatable, because its users should (and
do) wire up its GPIO chip-select line.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Cc: qemu-arm@nongnu.org
Cc: qemu-riscv@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
in old times the domain range was defined by a domain_bits le32.
This was then converted into a domain_range struct. During the
upgrade the original value of '32' (bits) has been kept while
the end field now is the max value of the domain id (UINT32_MAX).
Fix that and also use UINT64_MAX for the input_range.end.
Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211127072910.1261824-4-eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Endianess is not properly handled when populating
the returned config. Use the cpu_to_le* primitives
for each separate field. Also, while at it, trace
the domain range start.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211127072910.1261824-3-eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The spec says "the driver must not write to device configuration
fields". So remove the set_config() callback which anyway did
not do anything.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211127072910.1261824-2-eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add the SGXEPCSection list into SGXInfo to show the multiple
SGX EPC sections detailed info, not the total size like before.
This patch can enable numa support for 'info sgx' command and
QMP interfaces. The new interfaces show each EPC section info
in one numa node. Libvirt can use QMP interface to get the
detailed host SGX EPC capabilities to decide how to allocate
host EPC sections to guest.
(qemu) info sgx
SGX support: enabled
SGX1 support: enabled
SGX2 support: enabled
FLC support: enabled
NUMA node #0: size=67108864
NUMA node #1: size=29360128
The QMP interface show:
(QEMU) query-sgx
{"return": {"sgx": true, "sgx2": true, "sgx1": true, "sections": \
[{"node": 0, "size": 67108864}, {"node": 1, "size": 29360128}], "flc": true}}
(QEMU) query-sgx-capabilities
{"return": {"sgx": true, "sgx2": true, "sgx1": true, "sections": \
[{"node": 0, "size": 17070817280}, {"node": 1, "size": 17079205888}], "flc": true}}
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20211101162009.62161-4-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The basic SGX did not enable numa for SGX EPC sections, which
result in all EPC sections located in numa node 0. This patch
enable SGX numa function in the guest and the EPC section can
work with RAM as one numa node.
The Guest kernel related log:
[ 0.009981] ACPI: SRAT: Node 0 PXM 0 [mem 0x180000000-0x183ffffff]
[ 0.009982] ACPI: SRAT: Node 1 PXM 1 [mem 0x184000000-0x185bfffff]
The SRAT table can normally show SGX EPC sections menory info in different
numa nodes.
The SGX EPC numa related command:
......
-m 4G,maxmem=20G \
-smp sockets=2,cores=2 \
-cpu host,+sgx-provisionkey \
-object memory-backend-ram,size=2G,host-nodes=0,policy=bind,id=node0 \
-object memory-backend-epc,id=mem0,size=64M,prealloc=on,host-nodes=0,policy=bind \
-numa node,nodeid=0,cpus=0-1,memdev=node0 \
-object memory-backend-ram,size=2G,host-nodes=1,policy=bind,id=node1 \
-object memory-backend-epc,id=mem1,size=28M,prealloc=on,host-nodes=1,policy=bind \
-numa node,nodeid=1,cpus=2-3,memdev=node1 \
-M sgx-epc.0.memdev=mem0,sgx-epc.0.node=0,sgx-epc.1.memdev=mem1,sgx-epc.1.node=1 \
......
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20211101162009.62161-2-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the "Arm Generic Interrupt Controller Architecture
Specification GIC architecture version 3 and 4" (version G: page 345
for aarch64 or 509 for aarch32):
LRENP bit of ICH_MISR is set when ICH_HCR.LRENPIE==1 and
ICH_HCR.EOIcount is non-zero.
When only LRENPIE was set (and EOI count was zero), the LRENP bit was
wrongly set and MISR value was wrong.
As an additional consequence, if an hypervisor set ICH_HCR.LRENPIE,
the maintenance interrupt was constantly fired. It happens since patch
9cee1efe92 ("hw/intc: Set GIC maintenance interrupt level to only 0 or 1")
which fixed another bug about maintenance interrupt (most significant
bits of misr, including this one, were ignored in the interrupt trigger).
Fixes: 83f036fe3d ("hw/intc/arm_gicv3: Add accessors for ICH_ system registers")
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20211207094427.3473-1-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmGuK9cACgkQnKSrs4Gr
c8gr7gf9Fe6WZ85sbefQcsOvqc6AKcmiC1dhQ9qsdT4Y22Ft8BneiVHPflkpYExP
12n4DB8QIasU/j3RognHNdsh/SYV07TfsVBNJHrO3Z2f83HrfDd3BhUV2DnJgul0
AjriZvwZUy+WSEpJ1oPBOsu1hAlNE4Os7euyMx7m4Y63sO9nngLQ5kwDsHZXfFgf
jyinZ87hbtZMchYJBm6YAGiSGmdYMLbDU4/wj8tn61cF+uikMFU1CrdYQrZbHcFX
X+WC6nrSCay/3e+vD0zB7CK3Y9E+iuX52mwkwATx5aTJaHvmNtDXDb+ENI0am2uX
19XnpS5UGjuvca+1Su9gvvloVG5TSA==
=iOTh
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
# gpg: Signature made Mon 06 Dec 2021 07:27:19 AM PST
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
virtio-blk: Fix clean up of host notifiers for single MR transaction.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The code that introduced "virtio-blk: Configure all host notifiers in
a single MR transaction" introduced a second loop variable to perform
cleanup in second loop, but mistakenly still refers to the first
loop variable within the second loop body.
Fixes: d0267da614 ("virtio-blk: Configure all host notifiers in a single MR transaction")
Signed-off-by: Mark Mielke <mark.mielke@gmail.com>
Message-id: CALm7yL08qarOu0dnQkTN+pa=BSRC92g31YpQQNDeAiT4yLZWQQ@mail.gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This reverts commit 7852a77f59.
The check is bogus as it ends up finding itself and falling over.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/733
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206095209.2332376-1-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
load_elf() gives negative return in case of error, not zero.
Fixes: 10e3f30ff7 ("hw/mips/boston: Allow loading elf kernel and dtb")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211130211729.7116-3-jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
bl_gen_write_ulong uses sd for both 32 and 64 bit CPU,
while sd is illegal on 32 bit CPUs.
Replace sd with sw on 32bit CPUs.
Fixes: 3ebbf86128 ("hw/mips: Add a bootloader helper")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211130211729.7116-2-jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Guest might select another drive on the bus by setting the
DRIVE_SEL bit of the DIGITAL OUTPUT REGISTER (DOR).
The current controller model doesn't expect a BlockBackend
to be NULL. A simple way to fix CVE-2021-20196 is to create
an empty BlockBackend when it is missing. All further
accesses will be safely handled, and the controller state
machines keep behaving correctly.
Cc: qemu-stable@nongnu.org
Fixes: CVE-2021-20196
Reported-by: Gaoning Pan (Ant Security Light-Year Lab) <pgn@zju.edu.cn>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20211124161536.631563-3-philmd@redhat.com
BugLink: https://bugs.launchpad.net/qemu/+bug/1912780
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/338
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
We are going to re-use this code in the next commit,
so extract it as a new blk_create_empty_drive() function.
Inspired-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20211124161536.631563-2-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
When updating the R bit of a PTE, the Hash64 MMU was using a wrong byte
offset, causing the first byte of the adjacent PTE to be corrupted.
This caused a panic when booting FreeBSD, using the Hash MMU.
Fixes: a2dd4e83e7 ("ppc/hash64: Rework R and C bit updates")
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Lots of small fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmGk2o4PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpAP0H/i47erp9gRr4XXUd71mhwVeIj7SOwGIJYvuf
YAHnFPu/Hvtl0zMQ3tHsUFV4ak7SeyJpqTIspTrhRF5WN9RB2drF+bVEUM+zVLiC
dNpstDu1E3Po3RBMLwVBQK0fheo+n680wmgiB5I4H9xTukszRmRm3evIjZQpMwZ+
Gx9WLW4ghG3fRJyXbZFDzOW2nlD/LUIQQ9ZZk9no3jULzbFS5hDFP1yxTOKZOGYk
JeITGHx+ODIIBla5KIUkH2yDYurHvKoOzpxo1qLr65EmVMuq4TT1DjaAM0SRg8YO
X+osx1AZRW7ZznYOUEiJuWru8QDM/BD0t91oR1kZAaEdaF3gYB8=
=w54r
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci,pc: bugfixes
Lots of small fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 29 Nov 2021 02:50:06 PM CET
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
Fix bad overflow check in hw/pci/pcie.c
intel-iommu: ignore leaf SNP bit in scalable mode
virtio-balloon: correct used length
virtio-balloon: process all in sgs for free_page_vq
vdpa: Add dummy receive callback
failover: fix unplug pending detection
virtio-mmio : fix the crash in the vm shutdown
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Orginal qemu commit hash:14d02cfbe4adaeebe7cb833a8cc71191352cf03b
In function pcie_add_capability, an assert contains the
"offset < offset + size" expression.
Both variable offset and variable size are uint16_t,
the comparison is always true due to type promotion.
The next expression may be the same.
It might be like this:
Thread 1 "qemu-system-x86" hit Breakpoint 1, pcie_add_capability (
dev=0x555557ce5f10, cap_id=1, cap_ver=2 '\002', offset=256, size=72)
at ../hw/pci/pcie.c:930
930 {
(gdb) n
931 assert(offset >= PCI_CONFIG_SPACE_SIZE);
(gdb) n
932 assert(offset < offset + size);
(gdb) p offset
$1 = 256
(gdb) p offset < offset + size
$2 = 1
(gdb) set offset=65533
(gdb) p offset < offset + size
$3 = 1
(gdb) p offset < (uint16_t)(offset + size)
$4 = 0
Signed-off-by: Daniella Lee <daniellalee111@gmail.com>
Message-Id: <20211126061324.47331-1-daniellalee111@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When booting with scalable mode, I hit this error:
qemu-system-x86_64: vtd_iova_to_slpte: detected splte reserve non-zero iova=0xfffff002, level=0x1slpte=0x102681803)
qemu-system-x86_64: vtd_iommu_translate: detected translation failure (dev=01:00:00, iova=0xfffff002)
qemu-system-x86_64: New fault is not recorded due to compression of faults
This is because the SNP bit is set for second level page table since
Linux kernel commit 6c00612d0cba1 ("iommu/vt-d: Report right snoop
capability when using FL for IOVA") even if SC is not supported by the
hardware.
To unbreak the guest, ignore the leaf SNP bit for scalable mode
first. In the future we may consider to add SC support.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211129033618.3857-1-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Spec said:
"and len the total of bytes written into the buffer."
For inflateq, deflateq and statsq, we don't process in_sg so the used
length should be zero. For free_page_vq, tough the pages could be
changed by the device (in the destination), spec said:
"Note: len is particularly useful for drivers using untrusted buffers:
if a driver does not know exactly how much has been written by the
device, the driver would have to zero the buffer in advance to ensure
no data leakage occurs."
So 0 should be used as well here.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211129030841.3611-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
We only process the first in sg which may lead to the bitmap of the
pages belongs to following sgs were not cleared. This may result more
pages to be migrated. Fixing this by process all in sgs for
free_page_vq.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211129030841.3611-1-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is valid for an OS to put virtual interrupt ID values into the
list registers ICH_LR<n> which are greater than 1023. This
corresponds to (for example) KVM using the in-kernel emulated ITS to
give a (nested) guest an ITS. LPIs are delivered by the L1 kernel to
the L2 guest via the list registers in the same way as non-LPI
interrupts.
QEMU's code for handling writes to ICV_IARn (which happen when the L2
guest acknowledges an interrupt) and to ICV_EOIRn (which happen at
the end of the interrupt) did not consider LPIs, so it would
incorrectly treat interrupt IDs above 1023 as invalid. Fix this by
using the correct condition, which is gicv3_intid_is_special().
Note that the condition in icv_dir_write() is correct -- LPIs
are not valid there and so we want to ignore both "special" ID
values and LPIs.
(In the pseudocode this logic is in:
- VirtualReadIAR0(), VirtualReadIAR1(), which call IsSpecial()
- VirtualWriteEOIR0(), VirtualWriteEOIR1(), which call
VirtualIdentifierValid(data, TRUE) meaning "LPIs OK"
- VirtualWriteDIR(), which calls VirtualIdentifierValid(data, FALSE)
meaning "LPIs not OK")
This bug doesn't seem to have any visible effect on Linux L2 guests
most of the time, because the two bugs cancel each other out: we
neither mark the interrupt active nor deactivate it. However it does
mean that the L2 vCPU priority while the LPI handler is running will
not be correct, so the interrupt handler could be unexpectedly
interrupted by a different interrupt.
(NB: this has nothing to do with using QEMU's emulated ITS.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Failover needs to detect the end of the PCI unplug to start migration
after the VFIO card has been unplugged.
To do that, a flag is set in pcie_cap_slot_unplug_request_cb() and reset in
pcie_unplug_device().
But since
17858a1695 ("hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35")
we have switched to ACPI unplug and these functions are not called anymore
and the flag not set. So failover migration is not able to detect if card
is really unplugged and acts as it's done as soon as it's started. So it
doesn't wait the end of the unplug to start the migration. We don't see any
problem when we test that because ACPI unplug is faster than PCIe native
hotplug and when the migration really starts the unplug operation is
already done.
See c000a9bd06 ("pci: mark device having guest unplug request pending")
a99c4da9fc ("pci: mark devices partially unplugged")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20211118133225.324937-4-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The root cause for this crash is the ioeventfd not stopped while the VM stop.
The callback for vmstate_change was not implement in virtio-mmio bus
Reproduce step
load the vm with
-M microvm \
-netdev tap,id=net0,vhostforce,script=no,downscript=no \
-device virtio-net-device,netdev=net0\
After the VM boot, login the vm and then shutdown the vm
System will crash
[Current thread is 1 (Thread 0x7ffff6edde00 (LWP 374378))]
(gdb) bt
0 0x00005555558f18b4 in qemu_flush_or_purge_queued_packets (purge=false, nc=0x55500252e850) at ../net/net.c:636
1 qemu_flush_queued_packets (nc=0x55500252e850) at ../net/net.c:656
2 0x0000555555b6c363 in virtio_queue_notify_vq (vq=0x7fffe7e2b010) at ../hw/virtio/virtio.c:2339
3 virtio_queue_host_notifier_read (n=0x7fffe7e2b08c) at ../hw/virtio/virtio.c:3583
4 0x0000555555de7b5a in aio_dispatch_handler (ctx=ctx@entry=0x5555567c5780, node=0x555556b83fd0) at ../util/aio-posix.c:329
5 0x0000555555de8454 in aio_dispatch_ready_handlers (ready_list=<optimized out>, ctx=<optimized out>) at ../util/aio-posix.c:359
6 aio_poll (ctx=0x5555567c5780, blocking=blocking@entry=false) at ../util/aio-posix.c:662
7 0x0000555555cce0cc in monitor_cleanup () at ../monitor/monitor.c:645
8 0x0000555555b06bd2 in qemu_cleanup () at ../softmmu/runstate.c:822
9 0x000055555586e693 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at ../softmmu/main.c:51
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211109023744.22387-1-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The GICv3/v4 pseudocode has a function IsSpecial() which returns true
if passed a "special" interrupt ID number (anything between 1020 and
1023 inclusive). We open-code this condition in a couple of places,
so abstract it out into a new function gicv3_intid_is_special().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The logic of gicv3_redist_update() is as follows:
* it must be called in any code path that changes the state of
(only) redistributor interrupts
* if it finds a redistributor interrupt that is (now) higher
priority than the previous highest-priority pending interrupt,
then this must be the new highest-priority pending interrupt
* if it does *not* find a better redistributor interrupt, then:
- if the previous state was "no interrupts pending" then
the new state is still "no interrupts pending"
- if the previous best interrupt was not a redistributor
interrupt then that remains the best interrupt
- if the previous best interrupt *was* a redistributor interrupt,
then the new best interrupt must be some non-redistributor
interrupt, but we don't know which so must do a full scan
In commit 17fb5e36aa we effectively added the LPI interrupts
as a kind of "redistributor interrupt" for this purpose, by adding
cs->hpplpi to the set of things that gicv3_redist_update() considers
before it gives up and decides to do a full scan of distributor
interrupts. However we didn't quite get this right:
* the condition check for "was the previous best interrupt a
redistributor interrupt" must be updated to include LPIs
in what it considers to be redistributor interrupts
* every code path which updates the LPI state which
gicv3_redist_update() checks must also call gicv3_redist_update():
this is cs->hpplpi and the GICR_CTLR ENABLE_LPIS bit
This commit fixes this by:
* correcting the test on cs->hppi.irq in gicv3_redist_update()
* making gicv3_redist_update_lpi() always call gicv3_redist_update()
* introducing a new gicv3_redist_update_lpi_only() for the one
callsite (the post-load hook) which must not call
gicv3_redist_update()
* making gicv3_redist_lpi_pending() always call gicv3_redist_update(),
either directly or via gicv3_redist_update_lpi()
* removing a couple of now-unnecessary calls to gicv3_redist_update()
from some callers of those two functions
* calling gicv3_redist_update() when the GICR_CTLR ENABLE_LPIS
bit is cleared
(This means that the not-file-local gicv3_redist_* LPI related
functions now all take care of the updates of internally cached
GICv3 information, in the same way the older functions
gicv3_redist_set_irq() and gicv3_redist_send_sgi() do.)
The visible effect of this bug was that when the guest acknowledged
an LPI by reading ICC_IAR1_EL1, we marked it as not pending in the
LPI data structure but still left it in cs->hppi so we would offer it
to the guest again. In particular for setups using an emulated GICv3
and ITS and using devices which use LPIs (ie PCI devices) a Linux
guest would complain "irq 54: nobody cared" and then hang. (The hang
was intermittent, presumably depending on the timing between
different interrupts arriving and being completed.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20211124202005.989935-1-peter.maydell@linaro.org
When Enabled bit is cleared in GITS_CTLR,ITS feature continues
to be enabled.This patch fixes the issue.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20211124182246.67691-1-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virt machine has properties to enable MTE and Nested Virtualization
support. However, its check to ensure the backing accel implementation
supports it today only looks for KVM and bails out if it finds it.
Extend the checks to HVF as well as it does not support either today.
This will cause QEMU to print a useful error message rather than
silently ignoring the attempt by the user to enable either MTE or
the Virtualization extensions.
Reported-by: saar amar <saaramar5@gmail.com>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-id: 20211123122859.22452-1-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 18f6290a6a ("hw/intc: GICv3 ITS initial framework")
incremented version_id and minimum_version_id fields of
VMStateDescription vmstate_its. This breaks the migration between
6.2 and 6.1 with the following message:
qemu-system-aarch64: savevm: unsupported version 1 for 'arm_gicv3_its' v0
qemu-system-aarch64: load of migration failed: Invalid argument
Revert that change.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20211122171020.1195483-1-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Once a "One Time Programmable" is programmed, it shouldn't be reset.
Do not re-initialize the OTP content in the DeviceReset handler,
initialize it once in the DeviceRealize one.
Fixes: 9fb45c62ae ("riscv: sifive: Implement a model for SiFive FU540 OTP")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211119104757.331579-1-f4bug@amsat.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Configuring a drive with "if=none" is meant for creation of a backend
only, it should not get automatically assigned to a device frontend.
Use "if=pflash" for the One-Time-Programmable device instead (like
it is e.g. also done for the efuse device in hw/arm/xlnx-zcu102.c).
Since the old way of configuring the device has already been published
with the previous QEMU versions, we cannot remove this immediately, but
have to deprecate it and support it for at least two more releases.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211119102549.217755-1-thuth@redhat.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The ESCC datasheet states that SPEC_ALLSENT is always set in sync mode and set
in async mode once all characters have cleared the transmitter. Since writes to
SERIAL_DATA use a synchronous chardev API, the guest can never see the state when
transmission is in progress so it is possible to set SPEC_ALLSENT in the
R_SPEC register unconditionally.
This fixes a hang when using the Sun PROM as it attempts to enumerate the
onboard serial devices, and a similar hang in OpenBSD SPARC32 where in both cases
the boot process will not proceed until SPEC_ALLSENT has been set after writing
to W_TXCTRL1.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20211118181835.18497-3-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The "Transmit Interrupts and Transmit Buffer Empty Bit" section of the ESCC
datasheet states the following about the STATUS_TXEMPTY bit: "After a hardware
reset (including a hardware reset by software), or a channel reset, this bit
is set to 1".
Update escc_reset() to set the STATUS_TXEMPTY bit in the R_STATUS register
on device reset as described which fixes a regression whereby the Sun PROM
checks this bit early on startup and gets stuck in an infinite loop if it is
not set.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20211118181835.18497-2-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGXb2kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNkQggArLP8V1vL9XW9LJ6v4UdO4dp78MRb
mP5zZhzY6CZ9NnbLW3rtS8GLrQ7XJdHl4huVIckIF3HW+TOBas2gXOiyWdskZRFS
UGSoeejj2RHmTzBKWZN77G/GB0ElyKt3wvXeCEx0F8yiJXZhkw6n6tp3U/lGnic3
sJmniTBZ+m3GGtrAaEL11x8ITdtdGEE4uIhspqN8X0kU+WkSsklm8+GAORzMpWGq
Fqo46dd1C+st1GvbDOnghltYOEPPyKE6pZYOnZwB8X8hi01Ex53wXBXl98G8r8rt
qA6P0lc5Eh8E3M7xm+kJBw1XNSkxjQioJ1SElmQFW5w5rVtYVSDEsaL4MQ==
=3kjz
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
Bugfixes for 6.2.
# gpg: Signature made Fri 19 Nov 2021 10:33:29 AM CET
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
chardev/wctable: don't free the instance in wctablet_chr_finalize
meson.build: Support ncurses on MacOS and OpenBSD
docs: Spell QEMU all caps
qtest/am53c974-test: add test for reset before transfer
esp: ensure that async_len is reset to 0 during esp_hard_reset()
nvmm: Fix support for stable version
meson: fix botched compile check conversions
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* fix pmu vmstate
* Fix compile of byte_reverse on new compilers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmGXj0oACgkQUaNDx8/7
7KE2Yw//YonJIl8xqa179mC1RDRzVb7hFMYYmtcn0pbN732A4Fc3acXu29FyKJpR
91ZV/y4gMJKCFyH3KlSHuQD0Oe2tXE7PZk5sxzd0o8fElLmMr1nAmNoT8Udfm2y0
9IbnuPcGPz78fX6saN5MKlswHNuzDJGUpOzZjDkAjo3JZFbIg/YS76tMuc4GbkDH
tDWa0mCm+vmJVd5lD35I2iUcRwZcF2kH3DWbS95s0yg4x20YUclELDty35xDdXK4
wmTpgs2crMkP1ctWNkei+GOEzhmki7qcj+9iUJCV+2oLDWwUoVlXG0h4eke87/4d
x0y2eeqJYn4PcDR8X0wktUPd532hP9hFn6l26UVwZk1bHYQqWxg3JR32c18WkQlz
T2OhuEoTFUOJjTTReotZXdeZyaCsQkMUr7HL0y7p4hbvdGfdtCLNAgn5ppEWpb5+
dHRb7sKv613qUN1zaqb6Trepjn0MwEjrdnNJwoXXP+ALimKRCwcGsMlSGehmCyTI
kY2ZksQEq7z3TKCPi1VAS/gRbHBDn+FBGkptYv+N8xY1v+cmKpLogOsyLbACutZW
EhNDZC0YlqXZS2+OQ91SuNzhQZvARP88bVJFn29syFgS8WA6qoWihdRBXxkRFvFe
La8L3jwk5Z2kDLhdzp/NcZWv3ua210ITpt1/oSjtyJTUTQKeS+4=
=jJBv
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20211119' of https://github.com/legoater/qemu into staging
ppc 6.2 queue:
* fix pmu vmstate
* Fix compile of byte_reverse on new compilers
# gpg: Signature made Fri 19 Nov 2021 12:49:30 PM CET
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-ppc-20211119' of https://github.com/legoater/qemu:
tests/tcg/ppc64le: Fix compile flags for byte_reverse
pmu: fix pmu vmstate subsection list
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If a reset command is sent after data has been transferred into the SCSI buffer
ensure that async_len is reset to 0. Otherwise a subsequent TI command assumes
the SCSI buffer contains data to be transferred to the device causing it to
dereference the stale async_buf pointer.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/724
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211118100327.29061-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change namespaces to be shared namespaces by default (parameter
shared=on). Keep shared=off for older machine types.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
With commit 5ffbaeed16 ("hw/nvme: fix controller hot unplugging")
namespaces get moved from the controller to the subsystem if one
is specified.
That keeps the namespaces alive after a controller hot-unplug, but
after a controller hotplug we have to reconnect the namespaces
from the subsystem to the controller.
Fixes: 5ffbaeed16 ("hw/nvme: fix controller hot unplugging")
Cc: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
[k.jensen: only attach to shared and non-detached namespaces]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
While activating device in vmxnet3_acticate_device(), it does not
validate guest supplied configuration values against predefined
minimum - maximum limits. This may lead to integer overflow or
OOB access issues. Add checks to avoid it.
Fixes: CVE-2021-20203
Buglink: https://bugs.launchpad.net/qemu/+bug/1913873
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
hostwin is allocated and added to hostwin_list in vfio_host_win_add, but
it is only deleted from hostwin_list in vfio_host_win_del, which causes
a memory leak. Also, freeing all elements in hostwin_list is missing in
vfio_disconnect_container.
Fix: 2e4109de8e ("vfio/spapr: Create DMA window dynamically (SPAPR IOMMU v2)")
CC: qemu-stable@nongnu.org
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Link: https://lore.kernel.org/r/20211117014739.1839263-1-liangpeng10@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The subsection is not closed by a NULL marker so this can trigger
a segfault when the pmu vmstate is saved.
This can be easily shown with:
$ ./qemu-system-ppc64 -dump-vmstate vmstate.json
Segmentation fault (core dumped)
Fixes: d811d61fbc ("mac_newworld: add PMU device")
Cc: mark.cave-ayland@ilande.co.uk
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
pci power management fixes
acpi hotplug fixes
misc other fixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmGSh40PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpH2AH/RLY+ONL98GT4D+hi8MGCOhN669jrPbAqJ1L
l9p2GxDoXSD4PCDReU3VCzLtRsxsv/camgMx/DnDxaZtdgKm8SlXGJutMtNHpTY6
PHZLMLoixZSsKi6Tm3xGut/FSzsTZl4Gc3rqwaryHQLqptNO+XQJSBmP+oEAdjAd
nKVepHRveOTVVBBzCmoNpFA+BEXRTItdfG0ZKprPkXUobc2jeV7ymkTX9s2OBLEf
/pE49tZj1K4ab8g4+RY4cFEFoDZbXZ55Aq3ck5LAb47qIr/1cXPVP7PxINmasy4Y
H+oTUpWLBM7rFbdP/GBFANu5HkEQ5pnjeosWYOKsopE4UFCyDxc=
=y9C8
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pci,pc,virtio: bugfixes
pci power management fixes
acpi hotplug fixes
misc other fixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 15 Nov 2021 05:15:09 PM CET
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
pcie: expire pending delete
pcie: fast unplug when slot power is off
pcie: factor out pcie_cap_slot_unplug()
pcie: add power indicator blink check
pcie: implement slot power control for pcie root ports
pci: implement power state
vdpa: Check for existence of opts.vhostdev
vdpa: Replace qemu_open_old by qemu_open at
virtio: use virtio accessor to access packed event
virtio: use virtio accessor to access packed descriptor flags
tests: bios-tables-test update expected blobs
hw/i386/acpi-build: Deny control on PCIe Native Hot-plug in _OSC
bios-tables-test: Allow changes in DSDT ACPI tables
hw/acpi/ich9: Add compat prop to keep HPC bit set for 6.1 machine type
pcie: rename 'native-hotplug' to 'x-native-hotplug'
hw/mem/pc-dimm: Restrict NUMA-specific code to NUMA machines
vhost: Fix last vq queue index of devices with no cvq
vhost: Rename last_index to vq_index_end
softmmu/qdev-monitor: fix use-after-free in qdev_set_id()
net/vhost-vdpa: fix memory leak in vhost_vdpa_get_max_queue_pairs()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The PL031 currently is not able to report guest RTC change to the QMP
monitor as opposed to mc146818 or spapr RTCs. This patch adds the call
to qapi_event_send_rtc_change() when the Load Register is written. The
value which is reported corresponds to the difference between the guest
reference time and the reference time kept in softmmu/rtc.c.
For instance adding 20s to the guest RTC value will report 20. Adding
an extra 20s to the guest RTC value will report 20 + 20 = 40.
The inclusion of qapi/qapi-types-misc-target.h in hw/rtl/pl031.c
require to compile the PL031 with specific_ss.add() to avoid
./qapi/qapi-types-misc-target.h:18:13: error: attempt to use poisoned
"TARGET_<ARCH>".
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210920122535.269988-1-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Our GICv3 QOM interface includes an array property
redist-region-count which allows board models to specify that the
registributor registers are not in a single contiguous range, but
split into multiple pieces. We implemented this for KVM, but
currently the TCG GICv3 model insists that there is only one region.
You can see the limit being hit with a setup like:
qemu-system-aarch64 -machine virt,gic-version=3 -smp 124
Add support for split regions to the TCG GICv3. To do this we switch
from allocating a simple array of MemoryRegions to an array of
GICv3RedistRegion structs so that we can use the GICv3RedistRegion as
the opaque pointer in the MemoryRegion read/write callbacks. Each
GICv3RedistRegion contains the MemoryRegion, a backpointer allowing
the read/write callback to get hold of the GICv3State, and an index
which allows us to calculate which CPU's redistributor is being
accessed.
Note that arm_gicv3_kvm always passes in NULL as the ops argument
to gicv3_init_irqs_and_mmio(), so the only MemoryRegion read/write
callbacks we need to update to handle this new scheme are the
gicv3_redist_read/write functions used by the emulated GICv3.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The 'Last' bit in the GICR_TYPER GICv3 redistributor register is
supposed to be set to 1 if this is the last redistributor in a series
of contiguous redistributor pages. Currently we set Last only for
the redistributor for CPU (num_cpu - 1). This only works if there is
a single redistributor region; if there are multiple redistributor
regions then we need to set the Last bit for the last redistributor
in each region.
This doesn't cause any problems currently because only the KVM GICv3
supports multiple redistributor regions, and it ignores the value in
GICv3State::gicr_typer. But we need to fix this before we can enable
support for multiple regions in the emulated GICv3.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The GICv3 devices have an array property redist-region-count.
Currently we check this for errors (bad values) in
gicv3_init_irqs_and_mmio(), just before we use it. Move this error
checking to the arm_gicv3_common_realize() function, where we
sanity-check all of the other base-class properties. (This will
always be before gicv3_init_irqs_and_mmio() is called, because
that function is called in the subclass realize methods, after
they have called the parent-class realize.)
The motivation for this refactor is:
* we would like to use the redist_region_count[] values in
arm_gicv3_common_realize() in a subsequent patch, so we need
to have already done the sanity-checking first
* this removes the only use of the Error** argument to
gicv3_init_irqs_and_mmio(), so we can remove some error-handling
boilerplate
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add an expire time for pending delete, once the time is over allow
pressing the attention button again.
This makes pcie hotplug behave more like acpi hotplug, where one can
try sending an 'device_del' monitor command again in case the guest
didn't respond to the first attempt.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211111130859.1171890-7-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In case the slot is powered off (and the power indicator turned off too)
we can unplug right away, without round-trip to the guest.
Also clear pending attention button press, there is nothing to care
about any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211111130859.1171890-6-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211111130859.1171890-5-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Refuse to push the attention button in case the guest is busy with some
hotplug operation (as indicated by the power indicator blinking).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211111130859.1171890-4-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With this patch hot-plugged pci devices will only be visible to the
guest if the guests hotplug driver has enabled slot power.
This should fix the hot-plug race which one can hit when hot-plugging
a pci device at boot, while the guest is in the middle of the pci bus
scan.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211111130859.1171890-3-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows to power off pci devices. In "off" state the devices will
not be visible. No pci config space access, no pci bar access, no dma.
Default state is "on", so this patch (alone) should not change behavior.
Use case: Allows hotplug controllers implement slot power. Hotplug
controllers doing so should set the inital power state for devices in
the ->plug callback.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211111130859.1171890-2-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to access packed descriptor event and off_wrap via
address_space_{write|read}_cached(). When we hit the cache, memcpy()
is used which is not atomic which may lead a wrong value to be read or
wrote.
This patch fixes this by switching to use
virito_{stw|lduw}_phys_cached() to make sure the access is atomic.
Fixes: 683f766567 ("virtio: event suppression support for packed ring")
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211111063854.29060-2-jasowang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to access packed descriptor flags via
address_space_{write|read}_cached(). When we hit the cache, memcpy()
is used which is not an atomic operation which may lead a wrong value
is read or wrote.
So this patch switches to use virito_{stw|lduw}_phys_cached() to make
sure the aceess is atomic.
Fixes: 86044b24e8 ("virtio: basic packed virtqueue support")
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211111063854.29060-1-jasowang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are two ways to enable ACPI PCI Hot-plug:
* Disable the Hot-plug Capable bit on PCIe slots.
This was the first approach which led to regression [1-2], as
I/O space for a port is allocated only when it is hot-pluggable,
which is determined by HPC bit.
* Leave the HPC bit on and disable PCIe Native Hot-plug in _OSC
method.
This removes the (future) ability of hot-plugging switches with PCIe
Native hotplug since ACPI PCI Hot-plug only works with cold-plugged
bridges. If the user wants to explicitely use this feature, they can
disable ACPI PCI Hot-plug with:
--global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off
Change the bit in _OSC method so that the OS selects ACPI PCI Hot-plug
instead of PCIe Native.
[1] https://gitlab.com/qemu-project/qemu/-/issues/641
[2] https://bugzilla.redhat.com/show_bug.cgi?id=2006409
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211112110857.3116853-5-imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To solve issues [1-2] the Hot Plug Capable bit in PCIe Slots will be
turned on, while the switch to ACPI Hot-plug will be done in the
DSDT table.
Introducing 'x-keep-native-hpc' property disables the HPC bit only
in 6.1 and as a result keeps the forced 'reserve-io' on
pcie-root-ports in 6.1 too.
[1] https://gitlab.com/qemu-project/qemu/-/issues/641
[2] https://bugzilla.redhat.com/show_bug.cgi?id=2006409
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211112110857.3116853-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mark property as experimental/internal adding 'x-' prefix.
Property was introduced in 6.1 and it should have provided
ability to turn on native PCIE hotplug on port even when
ACPI PCI hotplug is in use is user explicitly sets property
on CLI. However that never worked since slot is wired to
ACPI hotplug controller.
Another non-intended usecase: disable native hotplug on slot
when APCI based hotplug is disabled, which works but slot has
'hotplug' property for this taks.
It should be relatively safe to rename it to experimental
as no users should exist for it and given that the property
is broken we don't really want to leave it around for much
longer lest users start using it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20211112110857.3116853-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Fix of a regression in floating point load instructions (Matheus)
* Associativity fix for pseries machine (Daniel)
* tlbivax fix for BookE machines (Danel)
-----BEGIN PGP SIGNATURE-----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=E3d7
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20211112' of https://github.com/legoater/qemu into staging
ppc 6.2 queue :
* Fix of a regression in floating point load instructions (Matheus)
* Associativity fix for pseries machine (Daniel)
* tlbivax fix for BookE machines (Danel)
# gpg: Signature made Fri 12 Nov 2021 12:11:29 PM CET
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-ppc-20211112' of https://github.com/legoater/qemu:
ppc/mmu_helper.c: do not truncate 'ea' in booke206_invalidate_ea_tlb()
spapr_numa.c: fix FORM1 distance-less nodes
target/ppc: Fix register update on lf[sd]u[x]/stf[sd]u[x]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* force_rcu notifiers
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGMQFwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPDcAf8CBwO73zxJd0Z3eHzgiSlDavb+ORy
vXkgGNMHBavaO+QuKzWrzuz42+6r+BW3mlMLEWGyEUGq7ZLbAwTGQ+zT+La8J+TG
xK872G8skl1j9Xb1TL7t/DeT9ja4MlZbB0LehFa/GIgh2V6mFjXTzH05PH5p9hd0
M8JGiLtrPEcIv4Df+T3pxbuQy45FqD4hLtEZJW4mKUm2oywxwHOLFty5+VVRxw5h
Rl5Xuf5UfhAdmmBIyIjhVcVGJf+I2Fg7M+6uf62RQ2SlVdg2ufanEL2uCYYPt4sD
kDbybursvyqf1IW4LF0vP2KznQE2Hckj6FeACYw32HrlQT6UzX7nbu2TdA==
=70MJ
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Fixes for SGX
* force_rcu notifiers
# gpg: Signature made Wed 10 Nov 2021 10:57:48 PM CET
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
sgx: Reset the vEPC regions during VM reboot
numa: avoid crash with SGX and "info numa"
accel/tcg: Register a force_rcu notifier
rcu: Introduce force_rcu notifier
target/i386: sgx: mark device not user creatable
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When trying to use the pc-dimm device on a non-NUMA machine, we get:
$ qemu-system-arm -M none -cpu max -S \
-object memory-backend-file,id=mem1,size=1M,mem-path=/tmp/1m \
-device pc-dimm,id=dimm1,memdev=mem1
Segmentation fault (core dumped)
(gdb) bt
#0 pc_dimm_realize (dev=0x555556da3e90, errp=0x7fffffffcd10) at hw/mem/pc-dimm.c:184
#1 0x0000555555fe1f8f in device_set_realized (obj=0x555556da3e90, value=true, errp=0x7fffffffce18) at hw/core/qdev.c:531
#2 0x0000555555feb4a9 in property_set_bool (obj=0x555556da3e90, v=0x555556e54420, name=0x5555563c3c41 "realized", opaque=0x555556a704f0, errp=0x7fffffffce18) at qom/object.c:2257
To avoid that crash, restrict the pc-dimm NUMA check to machines
supporting NUMA, and do not allow the use of 'node' property on
non-NUMA machines.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211106145016.611332-1-f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The -1 assumes that cvq device model is accounted in data_queue_pairs,
if cvq does not exists, but it's actually the opposite: Devices with
!cvq are ok but devices with cvq does not add the last queue to
data_queue_pairs.
This is not a problem to vhost-net, but it is to vhost-vdpa:
* Devices with cvq gets initialized at last data vq device model, not
at cvq one.
* Devices with !cvq never gets initialized, since last_index is the
first queue of the last device model.
Because of that, the right change in last_index is to actually add the
cvq, not to remove the missing one.
This is not a problem to vhost-net, but it is to vhost-vdpa, which
device model trust to reach the last index to finish starting the
device.
Also, as the previous commit, rename it to index_end.
Tested with vp_vdpa with host's vhost=on and vhost=off, with ctrl_vq=on
and ctrl_vq=off.
Fixes: 049eb15b5f ("vhost: record the last virtqueue index for the virtio device")
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20211104085625.2054959-3-eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The doc of this field pointed out that last_index is the last vq index.
This is misleading, since it's actually one past the end of the vqs.
Renaming and modifying comment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211104085625.2054959-2-eperezma@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For bare-metal SGX on real hardware, the hardware provides guarantees
SGX state at reboot. For instance, all pages start out uninitialized.
The vepc driver provides a similar guarantee today for freshly-opened
vepc instances, but guests such as Windows expect all pages to be in
uninitialized state on startup, including after every guest reboot.
Qemu can invoke the ioctl to bring its vEPC pages back to uninitialized
state. There is a possibility that some pages fail to be removed if they
are SECS pages, and the child and SECS pages could be in separate vEPC
regions. Therefore, the ioctl returns the number of EREMOVE failures,
telling Qemu to try the ioctl again after it's done with all vEPC regions.
The related kernel patches:
Link: https://lkml.kernel.org/r/20211021201155.1523989-3-pbonzini@redhat.com
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20211101162009.62161-6-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 71e6fae3a9 fixed an issue with FORM2 affinity guests with NUMA
nodes in which the distance info is absent in
machine_state->numa_state->nodes. This happens when QEMU adds a default
NUMA node and when the user adds NUMA nodes without specifying the
distances.
During the discussions of the forementioned patch [1] it was found that
FORM1 guests were behaving in a strange way in the same scenario, with
the kernel seeing the distances between the nodes as '160', as we can
see in this example with 4 NUMA nodes without distance information:
$ numactl -H
available: 4 nodes (0-3)
(...)
node distances:
node 0 1 2 3
0: 10 160 160 160
1: 160 10 160 160
2: 160 160 10 160
3: 160 160 160 10
Turns out that we have the same problem with FORM1 guests - we are
calculating associativity domain using zeroed values. And as it also
turns out, the solution from 71e6fae3a9 applies to FORM1 as well.
This patch creates a wrapper called 'get_numa_distance' that contains
the logic used in FORM2 to define node distances when this information
is absent. This helper is then used in all places where we need to read
distance information from machine_state->numa_state->nodes. That way
we'll guarantee that the NUMA node distance is always being curated
before being used.
After this patch, the FORM1 guest mentioned above will have the
following topology:
$ numactl -H
available: 4 nodes (0-3)
(...)
node distances:
node 0 1 2 3
0: 10 20 20 20
1: 20 10 20 20
2: 20 20 10 20
3: 20 20 20 10
This is compatible with what FORM2 guests and other archs do in this
case.
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg01960.html
Fixes: 690fbe4295 ("spapr_numa: consider user input when defining associativity")
CC: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
CC: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add the MEMORY_DEVICE_INFO_KIND_SGX_EPC case, so that enclave
memory is included in the output of "info numa" instead of crashing
the monitor.
Fixes: a7c565a941 ("sgx-epc: Add the fill_device_info() callback support", 2021-09-30)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The device is created by the machine based on the sgx-epc property.
It should not be created by users.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rewrite the function using g_string_append_printf() rather than
g_strdup_printf()/g_strconcat().
Fixes: df8abbbadf ("macfb: add common monitor modes supported by the MacOS toolbox ROM")
Cc: mark.cave-ayland@ilande.co.uk
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20211105165254.3544369-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
A configuration that specifies multiple nodes without distance info
results in the non-local points in the FORM2 matrix having a distance of
0. This causes Linux to complain "Invalid distance value range" because
a node distance is smaller than the local distance.
Fix this by building a simple local / remote fallback for points where
distance information is missing.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20211105135137.1584840-1-npiggin@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Test is wrong and the backend can never updated. It could have led to
a QEMU crash but since the firmware deactivates flash access if a valid
layout is not detected, it went unnoticed.
Reported-by: Coverity CID 1465223
Fixes: 35dde57662 ("ppc/pnv: Add a PNOR model")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211102162905.762078-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This avoids an off-by-one read of 'mode_sense_valid' buffer in
hw/scsi/scsi-disk.c:mode_sense_page().
Fixes: CVE-2021-3930
Cc: qemu-stable@nongnu.org
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Fixes: a8f4bbe290 ("scsi-disk: store valid mode pages in a table")
Fixes: #546
Reported-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=O6Wg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kraxel/tags/egl-20211105-pull-request' into staging
gtk: a collection of egl fixes.
# gpg: Signature made Fri 05 Nov 2021 07:30:21 AM EDT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
* remotes/kraxel/tags/egl-20211105-pull-request:
ui/gtk-egl: blitting partial guest fb to the proper scanout surface
ui/gtk: gd_draw_event returns FALSE when no cairo surface is bound
ui/gtk-egl: guest fb texture needs to be regenerated when reinitializing egl
ui/gtk-egl: make sure the right context is set as the current
ui/gtk-egl: un-tab and re-tab should destroy egl surface and context
virtio-gpu: splitting one extended mode guest fb into n-scanouts
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When guest is running Linux/X11 with extended multiple displays mode enabled,
the guest shares one scanout resource each time containing whole surface
rather than sharing individual display output separately. This extended frame
is properly splited and rendered on the corresponding scanout surfaces but
not in case of blob-resource (zero copy).
This code change lets the qemu split this one large surface data into multiple
in case of blob-resource as well so that each sub frame then can be blitted
properly to each scanout.
v2: resizing qemu console in virtio_gpu_update_dmabuf to scanout's width and
height
v3: updating stub function of virtio_gpu_update_dmabuf to match the type
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20211104065153.28897-5-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
hw_compat_5_2 has an issue: it affects only "virtio-net-pci"
but not "virtio-net-pci-transitional" and
"virtio-net-pci-non-transitional". The solution is to use the
"virtio-net-pci-base" type in compat_props.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1999141
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jean-Louis Dupond <jean-louis@dupond.be>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The fact that the MMIO handler is not re-entrant causes an infinite
loop under certain conditions:
Guest write to TDT -> Loopback -> RX (DMA to TDT) -> TX
We now eliminate the effect of this problem locally in e1000, by adding
a boolean in struct E1000State indicating when the TX side is busy. This
will cause any entering new call to return early instead of interfering
with the ongoing work, and eliminates any risk of looping.
This is intended to address CVE-2021-20257.
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
* DMA support in the multiboot option ROM
* Rename default-bus-bypass-iommu
* Deprecate -watchdog and cleanup -watchdog-action
* HVF fix for <PAGE_SIZE regions
* Support TSC scaling for AMD nested virtualization
* Fix for ESP fuzzing bug
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGBUeEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOh+Qf+OMRhRiv6dYjbK/5zXrx81AgxYAY3
dBUSr8v16LyrMl1U3DZWzhD+MzQsC83m/Xsh4lGxlHDWtkK9QQA5xDG95JZdY26i
MGCbbjnFHISbyBQV9Y724gPfPjOOODuoFbzafSx6VLITOcyv1ye0cm7TOjOPB+tt
E4c3JqTZ7g8a5yMe8ItkVhz5pPY+oVw8dxMNRp6Sup5Dbfx0DjacIwLasLsHfPL7
qBADfqB20ovHUzLjXu7oWgEd4KxJ6kiSCaJJu/KD36hg0wB8+WVP1o43j4PkczHT
QjU7eZaeaTrN5Cf34ttPge6QReMi5SFNCaA9O9/HLqrQgdEtt/diZWuqjQ==
=a2mC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Build system fixes and cleanups
* DMA support in the multiboot option ROM
* Rename default-bus-bypass-iommu
* Deprecate -watchdog and cleanup -watchdog-action
* HVF fix for <PAGE_SIZE regions
* Support TSC scaling for AMD nested virtualization
* Fix for ESP fuzzing bug
# gpg: Signature made Tue 02 Nov 2021 10:57:37 AM EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* remotes/bonzini/tags/for-upstream: (27 commits)
configure: fix --audio-drv-list help message
configure: Remove the check for the __thread keyword
Move the l2tpv3 test from configure to meson.build
meson: remove unnecessary coreaudio test program
meson: remove pointless warnings
meson.build: Allow to disable OSS again
meson: bump submodule to 0.59.3
qtest/am53c974-test: add test for cancelling in-flight requests
esp: ensure in-flight SCSI requests are always cancelled
KVM: SVM: add migration support for nested TSC scaling
hw/i386: fix vmmouse registration
watchdog: remove select_watchdog_action
vl: deprecate -watchdog
watchdog: add information from -watchdog help to -device help
hw/i386: Rename default_bus_bypass_iommu
hvf: Avoid mapping regions < PAGE_SIZE as ram
configure: do not duplicate CPU_CFLAGS into QEMU_LDFLAGS
configure: remove useless NPTL probe
target/i386: use DMA-enabled multiboot ROM for new-enough QEMU machine types
optionrom: add a DMA-enabled multiboot ROM
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add gdb-xml for MVE
More uses of tcg_constant_* in target/arm
Fix parameter naming for default-bus-bypass-iommu
Ignore cache operations to mmio in HVF
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmGBgjkdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8sAAgAsHaW2sHH/W4TzCwl
DfqFar4u047Q+ZtQHjNehGHF9Bxp4NS4A0qL52vk0hVoqeWlyF1N29MOnewgVDqY
q1x+uxJtG9xjTse7oEEshEEFF/7J8eB8dN4E78TFn/6IhvVhGiUeeRu29s44Ot6N
E2KABcXfd+4gEdqhepLGEbi5n0TnA8ARmmeffZNWVEbsxQjHnMQQYmqGmllB3xV3
qPpnp3avvD1015zMwrLVmlDO+tSRr/1bed7k3k26ebga2B/zitxcpXFNCDlgePx0
LNT5QYvBDpE7HOruGQjf4iXPJHfYw5VMtopK7K++rY9KWiJgBVSjQUcB462sdCPk
wNAp0g==
=vlZ5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-arm-20211102-2' into staging
Add nuvoton sd module for NPCM7XX
Add gdb-xml for MVE
More uses of tcg_constant_* in target/arm
Fix parameter naming for default-bus-bypass-iommu
Ignore cache operations to mmio in HVF
# gpg: Signature made Tue 02 Nov 2021 02:23:53 PM EDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* remotes/rth/tags/pull-arm-20211102-2:
hvf: arm: Ignore cache operations on MMIO
hw/arm/virt: Rename default_bus_bypass_iommu
target/arm: Use tcg_constant_i32() in gen_rev16()
target/arm: Use tcg_constant_i64() in do_sat_addsub_64()
target/arm: Use the constant variant of store_cpu_field() when possible
target/arm: Introduce store_cpu_field_constant() helper
target/arm: Use tcg_constant_i32() in op_smlad()
target/arm: Advertise MVE to gdb when present
tests/qtest/libqos: add SDHCI commands
hw/arm: Attach MMC to quanta-gbs-bmc
hw/arm: Add Nuvoton SD module to board
hw/sd: add nuvoton MMC
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
virtio-iommu support for x86/ACPI.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmGAefYPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpiCUH/2pIs3FmOGIasEqn4BnqXr4dHMReUO5Ghg0v
cXle4ZUrbg7Qpnxh07CwMuUpJV3Qv+xtVK7hzbD13nnxrkTZuKzBRV1AthkA1Hly
zIKOxnEgV497LaXoaSOtqAx48fuznk5XOHju91usgu4mehJ0qe2gcwb4H8uWGkQi
hrsR7a9woP0M4H/jvb3+aQRCJKMscj8ReabM1ulOugNpPdNI/jIKtBvZBtTxAqtQ
CH9/DJLfVmzDRYdeBpnF06A+tXm4uU1Q5BmpmF9qaymk/PzthN54gdnDd6zH405Z
Tmjp9UA2xfEYDmKzuTCBdPmoUe6OI7mU9o0WbB5MGYx5RRRBETw=
=R7DD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio: features, fixes
virtio-iommu support for x86/ACPI.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 01 Nov 2021 07:36:22 PM EDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
* remotes/mst/tags/for_upstream:
hw/i386: fix vmmouse registration
pci: Export pci_for_each_device_under_bus*()
pci: Define pci_bus_dev_fn/pci_bus_fn/pci_bus_ret_fn
hw/i386/pc: Allow instantiating a virtio-iommu device
hw/i386/pc: Move IOMMU singleton into PCMachineState
hw/i386/pc: Remove x86_iommu_get_type()
hw/acpi: Add VIOT table
vhost-vdpa: Set discarding of RAM broken when initializing the backend
qtest: fix 'expression is always false' build failure in qtest_has_accel()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since commit d8fb7d0969 ("vl: switch -M parsing to keyval"), machine
parameter definitions cannot use underscores, because keyval_dashify()
transforms them to dashes and the parser doesn't find the parameter.
This affects option default_bus_bypass_iommu which was introduced in the
same release:
$ qemu-system-aarch64 -M virt,default_bus_bypass_iommu=on
qemu-system-aarch64: Property 'virt-6.1-machine.default-bus-bypass-iommu' not found
Rename the parameter to "default-bus-bypass-iommu". Passing
"default_bus_bypass_iommu" is still valid since the underscore are
transformed automatically.
Fixes: 6d7a85483a ("hw/arm/virt: Add default_bus_bypass_iommu machine option")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211026093733.2144161-1-jean-philippe@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is obsolete since SeaBIOS 1.11.0 introduced native support for
sending messages to the serial console. The new support can be
activated using -machine graphics=off on x86 targets.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210909123219.862652-1-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Any extra draw call for the same blob resource representing guest scanout
before the previous drawing is not finished can break synchronous draw
sequence. To prevent this, drawing is now done only once for each draw
submission (when draw_submitted == true).
v2:
- removed mutex
- updated commit msg
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20210924225105.24930-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Allows edk2 detect virtio-mmio devices and pcie ecam.
See comment in hw/i386/microvm-dt.c for more details.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20211014193617.2475578-1-kraxel@redhat.com>
This is a counterpart to the HMP "info rdma" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info usb" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info numa" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info roms" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This turns the pattern
if (err) {
hmp_handle_error(mon, err);
return;
}
into
if (hmp_handle_error(mon, err)) {
return;
}
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is currently a check in esp_select() to cancel any in-flight SCSI requests
to ensure that issuing multiple select commands without continuing through the
rest of the ESP state machine ignores all but the last SCSI request. This is
also enforced through the addition of assert()s in esp_transfer_data() and
scsi_read_data().
The get_cmd() function does not call esp_select() when TC == 0 which means it is
possible for a fuzzer to trigger these assert()s by sending a select command when
TC == 0 immediately after a valid SCSI CDB has been submitted.
Since esp_select() is only called from get_cmd(), hoist the check to cancel
in-flight SCSI requests from esp_select() into get_cmd() to ensure it is always
called when executing a select command to initiate a new SCSI request.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Closes: https://gitlab.com/qemu-project/qemu/-/issues/662
Closes: https://gitlab.com/qemu-project/qemu/-/issues/663
Message-Id: <20211101183516.8455-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the logic of vmmouse_update_handler function,
vmmouse should be registered as an event handler when
it's status is zero.
vmmouse_read_id resets the status but does not register
the handler.
This patch adds vmmouse registration and activation when
status is reset.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <163524204515.1914131.16465061981774791228.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of invoking select_watchdog_action from both HMP and command line,
go directly from HMP to QMP and use QemuOpts as the intermediary for the
command line.
This makes -watchdog-action explicitly a shortcut for "-action watchdog",
so that "-watchdog-action" and "-action watchdog" override each other
based on the position on the command line; previously, "-action watchdog"
always won.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit d8fb7d0969 ("vl: switch -M parsing to keyval"), machine
parameter definitions cannot use underscores, because keyval_dashify()
transforms them to dashes and the parser doesn't find the parameter.
This affects option default_bus_bypass_iommu which was introduced in the
same release:
$ qemu-system-x86_64 -M q35,default_bus_bypass_iommu=on
qemu-system-x86_64: Property 'pc-q35-6.1-machine.default-bus-bypass-iommu' not found
Rename the parameter to "default-bus-bypass-iommu". Passing
"default_bus_bypass_iommu" is still valid since the underscore are
transformed automatically.
Fixes: c9e96b04fc ("hw/i386: Add a default_bus_bypass_iommu pc machine option")
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211025104737.1560274-1-jean-philippe@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As long as fw_cfg supports DMA, the new ROM can be used also on older
machine types because it has the same size as the existing one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This removes a parameter from x86_load_linux, and will avoid code
duplication between the linux and multiboot cases once multiboot
starts to support DMA.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As qemu guidelines:
Unless a pointer is used to modify the pointed-to storage, give it the
"const" attribute.
In the particular case of iova_tree_find it allows to enforce what is
requested by its comment, since the compiler would shout in case of
modifying or freeing the const-qualified returned pointer.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211013182713.888753-2-eperezma@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hi
this includes pending bits of migration patches.
- virtio-mem support by David Hildenbrand
- dirtyrate improvements by Hyman Huang
- fix rdma wrid by Li Zhijian
- dump-guest-memory fixes by Peter Xu
Pleas apply.
Thanks, Juan.
-----BEGIN PGP SIGNATURE-----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=8B3Y
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration-20211031-pull-request' into staging
Migration Pull request
Hi
this includes pending bits of migration patches.
- virtio-mem support by David Hildenbrand
- dirtyrate improvements by Hyman Huang
- fix rdma wrid by Li Zhijian
- dump-guest-memory fixes by Peter Xu
Pleas apply.
Thanks, Juan.
# gpg: Signature made Mon 01 Nov 2021 06:03:44 PM EDT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
* remotes/juanquintela/tags/migration-20211031-pull-request:
migration/dirtyrate: implement dirty-bitmap dirtyrate calculation
memory: introduce total_dirty_pages to stat dirty pages
migration/ram: Handle RAMBlocks with a RamDiscardManager on background snapshots
migration/ram: Factor out populating pages readable in ram_block_populate_pages()
migration: Simplify alignment and alignment checks
migration/postcopy: Handle RAMBlocks with a RamDiscardManager on the destination
virtio-mem: Drop precopy notifier
migration/ram: Handle RAMBlocks with a RamDiscardManager on the migration source
virtio-mem: Implement replay_discarded RamDiscardManager callback
memory: Introduce replay_discarded callback for RamDiscardManager
dump-guest-memory: Block live migration
migration: Add migrate_add_blocker_internal()
migration: Make migration blocker work for snapshots too
migration/dirtyrate: implement dirty-ring dirtyrate calculation
migration/dirtyrate: move init step of calculation to main thread
migration/dirtyrate: adjust order of registering thread
migration/dirtyrate: introduce struct and adjust DirtyRateStat
memory: make global_dirty_tracking a bitmask
KVM: introduce dirty_pages and kvm_dirty_ring_enabled
migration/rdma: Fix out of order wrid
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This device is part of a superio/ISA bridge chip and IRQs from it are
routed to an ISA interrupt set by the Interrupt Line PCI config
register. Implement this in a vt82c686-uhci-pci specific irq handler
Using via_isa_set_irq().
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <8d7ed385e33a847d8ddc669163a68b5ca57f82ce.1635161629.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instead of using pci_set_irq, store the irq in the device state and
use it explicitly so variants having different interrupt handling can
use their own.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <b39066e03c8731f4197d50bc79b403f797599999.1635161629.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Because this device only works as part of VIA superio chips set user
creatable to false. Since the class init method is common for UHCI
variants introduce a flag in UHCIInfo for this.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <e6abf1f19ca72bbc2d8a5a6aa941edbf87a9845f.1635161629.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fix a comment for coding style so subsequent patch will not get
checkpatch error and simplify and shorten uhci_update_irq().
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <b68a57dfcf181e73272b4dc951f8cc6e76b0d182.1635161629.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The LBA28 capacity (at offsets 60/61 of identification) is supposed to
express the maximum size supported by LBA28 commands. If the device is
larger than this, we have to cap it to 2^28-1.
At least NetBSD happens to be using this value to determine whether to use
LBA28 or LBA48 for its commands, using LBA28 for sectors that don't need
LBA48. This commit thus fixes NetBSD access to disks larger than 128GiB.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <20210824104344.3878849-1-samuel.thibault@ens-lyon.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
According to the logic of vmmouse_update_handler function,
vmmouse should be registered as an event handler when
it's status is zero.
vmmouse_read_id resets the status but does not register
the handler.
This patch adds vmmouse registration and activation when
status is reset.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <163524204515.1914131.16465061981774791228.stgit@pasha-ThinkPad-X280>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
They're actually more commonly used than the helper without _under_bus, because
most callers do have the pci bus on hand. After exporting we can switch a lot
of the call sites to use these two helpers.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20211028043129.38871-3-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
They're used in quite a few places of pci.[ch] and also in the rest of the code
base. Define them so that it doesn't need to be defined all over the places.
The pci_bus_fn is similar to pci_bus_dev_fn that only takes a PCIBus* and an
opaque. The pci_bus_ret_fn is similar to pci_bus_fn but it allows to return a
void* pointer.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20211028043129.38871-2-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow instantiating a virtio-iommu device by adding an ACPI Virtual I/O
Translation table (VIOT), which describes the relation between the
virtio-iommu and the endpoints it manages.
Add a hotplug handler for virtio-iommu on x86 and set the necessary
reserved region property. On x86, the [0xfee00000, 0xfeefffff] DMA
region is reserved for MSIs. DMA transactions to this range either
trigger IRQ remapping in the IOMMU or bypasses IOMMU translation.
Although virtio-iommu does not support IRQ remapping it must be informed
of the reserved region so that it can forward DMA transactions targeting
this region.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211026182024.2642038-5-jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We're about to support a third vIOMMU for x86, virtio-iommu which
doesn't inherit X86IOMMUState. Move the IOMMU singleton into
PCMachineState, so it can be shared between all three vIOMMUs.
The x86_iommu_get_default() helper is still needed by KVM and IOAPIC to
fetch the default IRQ-remapping IOMMU. Since virtio-iommu doesn't
support IRQ remapping, this interface doesn't need to change for the
moment. We could later replace X86IOMMUState with an "IRQ remapping
IOMMU" interface if necessary.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211026182024.2642038-4-jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To generate the IOMMU ACPI table, acpi-build.c can use base QEMU types
instead of a special IommuType value.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211026182024.2642038-3-jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a function that generates a Virtual I/O Translation table (VIOT),
describing the topology of paravirtual IOMMUs. The table is created if a
virtio-iommu device is present. It contains a virtio-iommu node and PCI
Range nodes for endpoints managed by the IOMMU. By default, a single
node describes all PCI devices. When passing the
"default_bus_bypass_iommu" machine option and "bypass_iommu" PXB option,
only buses that do not bypass the IOMMU are described by PCI Range
nodes.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211026182024.2642038-2-jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Similar to VFIO, vDPA will go ahead an map+pin all guest memory. Memory
that used to be discarded will get re-populated and if we
discard+re-access memory after mapping+pinning, the pages mapped into the
vDPA IOMMU will go out of sync with the actual pages mapped into the user
space page tables.
Set discarding of RAM broken such that:
- virtio-mem and vhost-vdpa run mutually exclusive
- virtio-balloon is inhibited and no memory discards will get issued
In the future, we might be able to support coordinated discarding of RAM
as used by virtio-mem and already supported by vfio via the
RamDiscardManager.
Acked-by: Jason Wang <jasowang@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Cindy Lu <lulu@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211027130324.59791-1-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Migration code now properly handles RAMBlocks which are indirectly managed
by a RamDiscardManager. No need for manual handling via the free page
optimization interface, let's get rid of it.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Implement it similar to the replay_populated callback.
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
since dirty ring has been introduced, there are two methods
to track dirty pages of vm. it seems that "logging" has
a hint on the method, so rename the global_dirty_log to
global_dirty_tracking would make description more accurate.
dirty rate measurement may start or stop dirty tracking during
calculation. this conflict with migration because stop dirty
tracking make migration leave dirty pages out then that'll be
a problem.
make global_dirty_tracking a bitmask can let both migration and
dirty rate measurement work fine. introduce GLOBAL_DIRTY_MIGRATION
and GLOBAL_DIRTY_DIRTY_RATE to distinguish what current dirty
tracking aims for, migration or dirty rate.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <9c9388657cfa0301bd2c1cfa36e7cf6da4aeca19.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Now that we check sysbus device types during device creation, we
can remove the check in the machine init done notifier.
This was the only thing done by this notifier, so we remove the
whole sysbus_notifier structure of the MachineState.
Note: This notifier was checking all /peripheral and /peripheral-anon
sysbus devices. Now we only check those added by -device cli option or
device_add qmp command when handling the command/option. So if there
are some devices added in one of these containers manually (eg in
machine C code), these will not be checked anymore.
This use case does not seem to appear apart from
hw/xen/xen-legacy-backend.c (it uses qdev_set_id() and in this case,
not for a sysbus device, so it's ok).
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211029142258.484907-4-damien.hedde@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Right now the allowance check for adding a sysbus device using
-device cli option (or device_add qmp command) is done well after
the device has been created. It is done during the machine init done
notifier: machine_init_notify() in hw/core/machine.c
This new function will allow us to do the check at the right time and
issue an error if it fails.
Also make device_is_dynamic_sysbus() use the new function.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211029142258.484907-2-damien.hedde@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We are going to introduce an unit test for the parser smp_parse()
in hw/core/machine.c, but now machine.c is only built in softmmu.
In order to solve the build dependency on the smp parsing code and
avoid building unrelated stuff for the unit tests, move the tested
code from machine.c into a separate file, i.e., machine-smp.c and
build it in common field.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211026034659.22040-2-wangyanan55@huawei.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Restrict hotplug to system emulation, add stubs for the other uses.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211028150521.1973821-5-philmd@redhat.com>
As we want to be able to conditionally add files to the hw/core
file list, use a source set.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211028150521.1973821-3-philmd@redhat.com>
All these files don't make sense for tools and user emulation,
restrict them to system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211028150521.1973821-2-philmd@redhat.com>
Only softmmu code uses gpio, so move gpio code from qdev.c to
gpio.c and compile it only on softmmu mode.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190425200051.19906-2-ehabkost@redhat.com>
[PMD: Rebased]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The MSI-X structures of some devices and other non-MSI-X structures
may be in the same BAR. They may share one host page, especially in
the case of large page granularity, such as 64K.
For example, MSIX-Table size of 82599 NIC is 0x30 and the offset in
Bar 3(size 64KB) is 0x0. vfio_listener_region_add() will be called
to map the remaining range (0x30-0xffff). If host page size is 64KB,
it will return early at 'int128_ge((int128_make64(iova), llend))'
without any message. Let's add a trace point to inform users like commit
5c08600547 ("vfio: Use a trace point when a RAM section cannot be DMA mapped")
did.
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Link: https://lore.kernel.org/r/20211027090406.761-3-jiangkunkun@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We can expand MemoryRegions of sub-page MMIO BARs in
vfio_pci_write_config() to improve IO performance for some
devices. However, the MemoryRegions of destination VM are
not expanded any more after live migration. Because their
addresses have been updated in vmstate_load_state()
(vfio_pci_load_config) and vfio_sub_page_bar_update_mapping()
will not be called.
This may result in poor performance after live migration.
So iterate BARs in vfio_pci_load_config() and try to update
sub-page BARs.
Reported-by: Nianyao Tang <tangnianyao@huawei.com>
Reported-by: Qixin Gan <ganqixin@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Link: https://lore.kernel.org/r/20211027090406.761-2-jiangkunkun@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Artist is another device, this one is the Lasi PS/2.
Rename the functions accordingly.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20210920064048.2729397-2-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The expected output string from cpu_slot_to_string() ought to be
like "socket-id: *, die-id: *, core-id: *, thread-id: *", so add
the missing ", " before "die-id". This affects the readability
of the error message.
Fixes: 176d2cda0d ("i386/cpu: Consolidate die-id validity in smp context")
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211008075040.18028-1-wangyanan55@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The hw_error function calls abort and is not meant to be used by
devices. Use qemu_log_mask instead to log and ignore invalid accesses.
Also fix format strings to allow dropping type casts of hwaddr and use
__func__ instead of hard coding function name in the message which
were wrong in two cases.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <f818dc3dd2ac8c3b3d53067f316a716d7f9683d8.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The timer unit only has registers that fit in a region 0x30 bytes
long. No need to have the timer region larger than that.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <b1cd196cf1395a602c7a08a4f858e69e50c446a1.1635550060.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
It's more readable to keep things on one line if it fits the length limit.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <97bc2a38991f33fd0c8cc2e4d0a3a29b20c47d1f.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
According to coding style types should be camel case, also remove
unneded casts from void *.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <d9a9d160c1153a583397e366ab06477f5a31c507.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The sh_intc_locate function will either init these or not return so no
need to initialise them.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <15e04aa665c68ab5df47bbf505346d413be2fc1c.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Use g_new0 instead of g_malloc0 and avoid some unneeded temporary
variable assignments.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <72efc4f2c4ff8b96848d03dca08e4541ee4076f6.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instead of if !expr continue else do something it is more straight
forward to say if expr then do something, especially if the action is
just a few lines. Remove such uses of continue to make the code easier
to follow.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <0efaa5e7a1a3ee11f82b3bb1942c287576c67f8b.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
All the places that call abort should not happen which is better
marked by g_assert_not_reached.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <039e6a784532f2af27f8adeafdb8e0391722f567.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This function is very simple and provides no advantage. Call sites
become simpler without it so just write it in line and drop the
separate function.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <a98d1f7f94e91a42796b7d91e9153a7eaa3d1c44.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Address of element i is one word thus clearer than array + i.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <f49c9b1dee1fcaf374b092d862a6821907d5fcdc.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Drop unneded parenthesis and split up one complex expression to write
it with less brackets so it's easier to follow.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <a48e849e5b803a952ed15a2502cfece2bde68934.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The sh_intc_register() function is only used at one place. Move them
together so it's easier to see what's going on.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <49f2742bc67cba7164385fafad204ab1e1bd3a0b.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The INT_REG_PARAMS macro was only used a few times within one function
on adjacent lines and is actually more complex than writing out the
parameters so simplify it by expanding the macro at call sites and
dropping the #define.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <d3bdfdc5ab5ae1c51a6c6c38bde3829a99f85ce5.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Rename the iomem region to "intc" from "interrupt-controller" which
makes the info mtree output less wide as it is already too wide
because of all the aliases. Also drop the format macro which was only
used twice in close proximity so we can just use the literal string
instead without a macro definition.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <cb6402dab6b44c804142b5cf9af68e6398cb613f.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Turn the INTC_MODE defines into an enum and clean up the function
returning these to make it clearer by removing nested ifs and
superfluous parenthesis. The one remaining #define is a flag which is
moved further apart by changing its value from 8 to 0x80 to leave some
spare bits as this is or-ed with the enum value at some places.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <4adf4e1ac9d2e728e5a536c69e310d77f0c4455a.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The INTC_A7 local macro does the same as the A7ADDR from
include/sh/sh.h so use the latter and drop the local macro definition.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <53f033477c73b7c9b021d36033c590416d6199c7.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Normally there are at least two sh_serial instances. Add device id to
trace messages to make it clear which instance they belong to
otherwise its not possible to tell which serial device is accessed.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <cc1f9ff9f4259ae799750e452f8871849c7a104c.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <92902ba34fdf2c8c62232365fbb6531b1036d557.1635541329.git.balaton@eik.bme.hu>
[PMD: Use g_strdup() to initialize DeviceState::id]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instead of allocating timer with timer_new store it directly in the
state struct. This makes it simpler to free it together with the device.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <fd01eb3720ec32dab06e03019f72f3e177033679.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Replace fprintf with qemu_log_mask LOG_GUEST_ERROR as the intention is
to handle valid accesses in these functions so if we get to these
errors then it's an invalid access. Do not abort as that would allow
the guest to crash QEMU and the practice in other devices is to not do
that just log and ignore the invalid access. While at it also simplify
the complex bit ops to check if a return value was set which can be
done much simpler and clearer.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <6b46045141d6d9cc32e17c223896fa1116384796.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fixup the PLIC context address to correctly support the threshold and
claim register.
Fixes: ef63100648 ("hw/riscv: opentitan: Update to the latest build")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211025040657.262696-1-alistair.francis@opensource.wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211022060133.3045020-5-alistair.francis@opensource.wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211022060133.3045020-4-alistair.francis@opensource.wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211022060133.3045020-3-alistair.francis@opensource.wdc.com
Add a generic function that can create the PLIC strings.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211022060133.3045020-2-alistair.francis@opensource.wdc.com
Using a macro for the PLIC configuration doesn't make the code any
easier to read. Instead it makes it harder to figure out what is going
on, so let's remove it.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20211022060133.3045020-1-alistair.francis@opensource.wdc.com
Use QEMU_ALIGN_DOWN() macro to reduce code and to make it
more human readable.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <b84eb324d2ebdcc6f9c442c97b5b4d01eecb4f43.1632758315.git.qemu_oss@crudebyte.com>
When client sent a 9p Tgetattr request then the wrong I/O block
size value was returned by 9p server; instead of host file
system's I/O block size it should rather return an I/O block
size according to 9p session's 'msize' value, because the value
returned to client should be an "optimum" block size for I/O
(i.e. to maximize performance), it should not reflect the actual
physical block size of the underlying storage media.
The I/O block size of a host filesystem is typically 4k, so the
value returned was far too low for good 9p I/O performance.
This patch adds stat_to_iounit() with a similar approach as the
existing get_iounit() function.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1mT2Js-0000DW-OH@lizzy.crudebyte.com>
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211015203532.2463705-4-tong.ho@xilinx.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211015203532.2463705-3-tong.ho@xilinx.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211015203532.2463705-2-tong.ho@xilinx.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- Vector extension bug fixes
- Bit manipulation extension bug fix
- Support vhost-user and numa mem options on all boards
- Rationalise XLEN and operand lengths
- Bump the OpenTitan FPGA support
- Remove the Ibex PLIC
- General code cleanup
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmFyvkoACgkQIeENKd+X
cFRvOQgAmSgFMu7BbiuLJ7W/0kK/a8vM53+HAMFyFvYiTS7ae2NRmxKyeR/OhFLf
qm36G/SbBhymWAvJysACa7mjvn104WnXkMdhLYGimkne/65IbnQOImzpXk81WP/n
45p/y0DdCs5pP2JNf9aIVxMMzgH2Lo4IgKxLFz+qpnphxtZGjdpocrCz837BOZQH
p61hadfi3rTc06w0Auq8A4Zr+Rp/gpoGzXmB0ujfRGfqi+brg40TV4EAX33e3BJi
249922MbFy2KqqO8H8So9rTZiK4gb/KJ0vGp61nwPcGsf1JPWXpeeb2g6L1syXHW
8J9VezmnIs8bs2SXDvkf0aZpEvDrIA==
=AKR1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair23/tags/pull-riscv-to-apply-20211022-2' into staging
Fourth RISC-V PR for QEMU 6.2
- Vector extension bug fixes
- Bit manipulation extension bug fix
- Support vhost-user and numa mem options on all boards
- Rationalise XLEN and operand lengths
- Bump the OpenTitan FPGA support
- Remove the Ibex PLIC
- General code cleanup
# gpg: Signature made Fri 22 Oct 2021 06:36:10 AM PDT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
* remotes/alistair23/tags/pull-riscv-to-apply-20211022-2: (33 commits)
hw/riscv: spike: Use MachineState::ram and MachineClass::default_ram_id
hw/riscv: sifive_u: Use MachineState::ram and MachineClass::default_ram_id
hw/riscv: sifive_e: Use MachineState::ram and MachineClass::default_ram_id
hw/riscv: shakti_c: Use MachineState::ram and MachineClass::default_ram_id
hw/riscv: opentitan: Use MachineState::ram and MachineClass::default_ram_id
hw/riscv: microchip_pfsoc: Use MachineState::ram and MachineClass::default_ram_id
hw/intc: sifive_plic: Cleanup the irq_request function
hw/intc: sifive_plic: Cleanup the realize function
hw/intc: sifive_plic: Move the properties
hw/intc: Remove the Ibex PLIC
hw/riscv: opentitan: Update to the latest build
target/riscv: Compute mstatus.sd on demand
target/riscv: Use riscv_csrrw_debug for cpu_dump
target/riscv: Use gen_shift*_per_ol for RVB, RVI
target/riscv: Use gen_unary_per_ol for RVB
target/riscv: Adjust trans_rev8_32 for riscv64
target/riscv: Use gen_arith_per_ol for RVM
target/riscv: Replace DisasContext.w with DisasContext.ol
target/riscv: Replace is_32bit with get_xl/get_xlen
target/riscv: Properly check SEW in amo_op
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* New fp5280g2-bmc board (John)
* Small cleanup in Aspeed SMC model (Cedric)
-----BEGIN PGP SIGNATURE-----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=qbBN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/clg/tags/pull-aspeed-20211022' into staging
Aspeed patches :
* New fp5280g2-bmc board (John)
* Small cleanup in Aspeed SMC model (Cedric)
# gpg: Signature made Fri 22 Oct 2021 12:55:18 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/clg/tags/pull-aspeed-20211022:
speed/sdhci: Add trace events
aspeed/smc: Use a container for the flash mmio address space
aspeed: Add support for the fp5280g2-bmc board
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using memory_region_init_ram(), which can't possibly handle vhost-user,
and can't work as expected with '-numa node,memdev' options.
Use MachineState::ram instead of manually initializing RAM memory
region, as well as by providing MachineClass::default_ram_id to
opt in to memdev scheme.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211020014112.7336-7-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Using memory_region_init_ram(), which can't possibly handle vhost-user,
and can't work as expected with '-numa node,memdev' options.
Use MachineState::ram instead of manually initializing RAM memory
region, as well as by providing MachineClass::default_ram_id to
opt in to memdev scheme.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211020014112.7336-6-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Using memory_region_init_ram(), which can't possibly handle vhost-user,
and can't work as expected with '-numa node,memdev' options.
Use MachineState::ram instead of manually initializing RAM memory
region, as well as by providing MachineClass::default_ram_id to
opt in to memdev scheme.
While at it add check for user supplied RAM size and error out if it
mismatches board expected value.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20211020014112.7336-5-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Using memory_region_init_ram(), which can't possibly handle vhost-user,
and can't work as expected with '-numa node,memdev' options.
Use MachineState::ram instead of manually initializing RAM memory
region, as well as by providing MachineClass::default_ram_id to
opt in to memdev scheme.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211020014112.7336-4-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Using memory_region_init_ram(), which can't possibly handle vhost-user,
and can't work as expected with '-numa node,memdev' options.
Use MachineState::ram instead of manually initializing RAM memory
region, as well as by providing MachineClass::default_ram_id to
opt in to memdev scheme.
While at it add check for user supplied RAM size and error out if it
mismatches board expected value.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20211020014112.7336-3-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Using memory_region_init_ram(), which can't possibly handle vhost-user,
and can't work as expected with '-numa node,memdev' options.
Use MachineState::ram instead of manually initializing RAM memory
region, as well as by providing MachineClass::default_ram_id to
opt in to memdev scheme.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20211020014112.7336-2-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-Id: <20211018132609.160008-6-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Because AddressSpaces must not be sysbus-mapped, commit e9c568dbc2
("hw/arm/aspeed: Do not sysbus-map mmio flash region directly, use
alias") introduced an alias for the flash mmio region.
Using a container is cleaner.
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-Id: <20211018132609.160008-5-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The fp5280g2-bmc is supported by OpenBMC, It's
based on the following device tree
https://github.com/openbmc/linux/blob/dev-5.10/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
Signed-off-by: John Wang <wangzhiqiang02@inspur.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211014064548.934799-1-wangzhiqiang02@inspur.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Shortly, the set of supported XL will not be just 32 and 64,
and representing that properly using the enumeration will be
imperative.
Two places, booting and gdb, intentionally use misa_mxl_max
to emphasize the use of the reset value of misa.mxl, and not
the current cpu state.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-5-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If default main_mem is used to be registered as the system memory,
other memory cannot be initialized. Therefore, the system memory
should be initialized to the machine->ram, which consists of the
default main_mem and other possible memory required by applications,
such as shared hugepage memory in DPDK.
Also, the mc->defaul_ram_id should be set to the default main_mem,
such as "riscv_virt_board.ram" for the virt machine.
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211016030908.40480-1-limingwang@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Generate DBG2 table
Switch to ssize_t for elf loader return type
Fixed sbsa cpu type error message typo
Only initialize required submodules for edk2
Dont create device-tree node for empty NUMA node
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmFxhbgdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/Z6gf/Wt/iI+cwM8+eNYgV
fFrvkN2YUBS4B7QBVs7axbUmHs+/B8PIyBjo9WLmkMTdgnj13JiXmvE879PZwryr
zlh/2KqKBq+87L5CMOfPXtePizlZI/TuxJL0koIMW/L85ABEYOMyaDp0bDqhJHHb
UNBxvlxHgBmZUpBkmJKWoOKxQ9Jz8M5jpoUjKFCxhMHqbzAQOjS0B0IR6E4n8R4o
pKiWStc2TB7aGtVRY/Jm4EaSy9n3g77K40Yxkn6txN8Eqm/QxCLq9uwEZM2YMR5h
IJUxdUVNT31mCd2EhSAlHqpCrKuFaGCb+t8fQxLkd73AT5Unm5jJl5alfsO8khgV
TgipUA==
=boXv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-arm-20211021' into staging
Introduce cpu topology support
Generate DBG2 table
Switch to ssize_t for elf loader return type
Fixed sbsa cpu type error message typo
Only initialize required submodules for edk2
Dont create device-tree node for empty NUMA node
# gpg: Signature made Thu 21 Oct 2021 08:22:32 AM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* remotes/rth/tags/pull-arm-20211021:
tests/data/acpi/virt: Update the empty expected file for PPTT
hw/arm/virt-acpi-build: Generate PPTT table
tests/data/acpi/virt: Add an empty expected file for PPTT
hw/acpi/aml-build: Add PPTT table
hw/acpi/aml-build: Add Processor hierarchy node structure
hw/arm/virt: Add cpu-map to device tree
device_tree: Add qemu_fdt_add_path
hw/arm/virt: Only describe cpu topology since virt-6.2
bios-tables-test: Generate reference table for virt/DBG2
hw/arm/virt_acpi_build: Generate DBG2 table
tests/acpi: Add void table for virt/DBG2 bios-tables-test
hw/elf_ops.h: switch to ssize_t for elf loader return type
hw/arm/sbsa-ref: Fixed cpu type error message typo.
roms/edk2: Only initialize required submodules
roms/edk2: Only init brotli submodule to build BaseTools
hw/arm/virt: Don't create device-tree node for empty NUMA node
tests/acpi: Generate reference blob for IORT rev E.b
hw/arm/virt-acpi-build: IORT upgrade up to revision E.b
tests/acpi: Get prepared for IORT E.b revision upgrade
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Generate the Processor Properties Topology Table (PPTT) for ARM
virt machines supporting it (>= 6.2).
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20211020142125.7516-8-wangyanan55@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add the Processor Properties Topology Table (PPTT) used to
describe CPU topology information to ACPI guests.
Note, a DT-boot Linux guest with a non-flat CPU topology will
see socket and core IDs being sequential integers starting
from zero, which is different from ACPI-boot Linux guest,
e.g. with -smp 4,sockets=2,cores=2,threads=1
a DT boot produces:
cpu: 0 package_id: 0 core_id: 0
cpu: 1 package_id: 0 core_id: 1
cpu: 2 package_id: 1 core_id: 0
cpu: 3 package_id: 1 core_id: 1
an ACPI boot produces:
cpu: 0 package_id: 36 core_id: 0
cpu: 1 package_id: 36 core_id: 1
cpu: 2 package_id: 96 core_id: 2
cpu: 3 package_id: 96 core_id: 3
This is due to several reasons:
1) DT cpu nodes do not have an equivalent field to what the PPTT
ACPI Processor ID must be, i.e. something equal to the MADT CPU
UID or equal to the UID of an ACPI processor container. In both
ACPI cases those are platform dependant IDs assigned by the
vendor.
2) While QEMU is the vendor for a guest, if the topology specifies
SMT (> 1 thread), then, with ACPI, it is impossible to assign a
core-id the same value as a package-id, thus it is not possible
to have package-id=0 and core-id=0. This is because package and
core containers must be in the same ACPI namespace and therefore
must have unique UIDs.
3) ACPI processor containers are not mandatorily required for PPTT
tables to be used and, due to the limitations of which IDs are
selected described above in (2), they are not helpful for QEMU,
so we don't build them with this patch. In the absence of them,
Linux assigns its own unique IDs. The maintainers have chosen not
to use counters from zero, but rather ACPI table offsets, which
explains why the numbers are so much larger than with DT.
4) When there is no SMT (threads=1) the core IDs for ACPI boot guests
match the logical CPU IDs, because these IDs must be equal to the
MADT CPU UID (as no processor containers are present), and QEMU
uses the logical CPU ID for these MADT IDs.
So in summary, with QEMU as the vendor for the guests, we simply
use sequential integers starting from zero for the non-leaf nodes
but with ID-valid flag unset, so that guest will ignore them and
use table offsets as unique container IDs. And we use logical CPU
IDs for the leaf nodes with the ID-valid flag set, which will be
consistent with MADT.
Currently the implementation of PPTT generation complies with ACPI
specification 5.2.29 (Revision 6.3). The 6.3 spec can be found at:
https://uefi.org/sites/default/files/resources/ACPI_6_3_May16.pdf
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Co-developed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20211020142125.7516-6-wangyanan55@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a generic API to build Processor hierarchy node structure (Type 0),
which is strictly consistent with descriptions in ACPI 6.3: 5.2.29.1.
This function will be used to build ACPI PPTT table for cpu topology.
Co-developed-by: Ying Fang <fangying1@huawei.com>
Co-developed-by: Henglong Fan <fanhenglong@huawei.com>
Co-developed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20211020142125.7516-5-wangyanan55@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Support device tree CPU topology descriptions.
In accordance with the Devicetree Specification, the Linux Doc
"arm/cpus.yaml" requires that cpus and cpu nodes in the DT are
present. And we have already met the requirement by generating
/cpus/cpu@* nodes for members within ms->smp.cpus. Accordingly,
we should also create subnodes in cpu-map for the present cpus,
each of which relates to an unique cpu node.
The Linux Doc "cpu/cpu-topology.txt" states that the hierarchy
of CPUs in a SMP system is defined through four entities and
they are socket/cluster/core/thread. It is also required that
a socket node's child nodes must be one or more cluster nodes.
Given that currently we are only provided with information of
socket/core/thread, we assume there is one cluster child node
in each socket node when creating cpu-map.
Co-developed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20211020142125.7516-4-wangyanan55@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On existing older machine types, without cpu topology described
in ACPI or DT, the guest will populate one by default. With the
topology described, it will read the information and set up its
topology as instructed, but that may not be the same as what was
getting used by default. It's possible that an user application
has a dependency on the default topology and if the default one
gets changed it will probably behave differently.
Based on above consideration we'd better only describe topology
information to the guest on 6.2 and later machine types.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20211020142125.7516-2-wangyanan55@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
ARM SBBR specification mandates DBG2 table (Debug Port Table 2)
since v1.0 (ARM DEN0044F 8.3.1.7 DBG2).
The DBG2 table allows to describe one or more debug ports.
Generate an DBG2 table featuring a single debug port, the PL011.
The DBG2 specification can be found at
"Microsoft Debug Port Table 2 (DBG2)"
https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi-debug-port-table?redirectedfrom=MSDN
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20211019080037.930641-3-eric.auger@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Recent Linux kernels are accessing the PCI device in slot 0 that
represents the PCI host bridge. This causes ppc4xx_pci_map_irq()
to return -1 which causes an assert() later:
hw/pci/pci.c:262: pci_bus_change_irq_level: Assertion `irq_num >= 0' failed.
Thus we should allocate an IRQ line for the device in slot 0, too.
To avoid changes to the outside of ppc4xx_pci.c, we map it to
the internal IRQ number 4 which will then happily be ignored since
ppc440_bamboo.c does not wire it up.
With these changes it is now possible again to use recent Linux
kernels for the bamboo board.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211019091817.469003-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This only helps Linux guests as only that seems to use it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <1c1e030f2bbc86e950b3310fb5922facdc21ef86.1634241019.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Define a constant for PCI config addresses to make it clearer what
these numbers are.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <9bd8e84d02d91693b71082a1fadeb86e6bce3025.1634241019.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of relying on the mapped address of the MV64361 registers
access them via their memory region. This is not a problem at reset
time when these registers are mapped at the default address but the
guest could change this later and then the RTAS calls accessing PCI
config registers could fail. None of the guests actually do this so
this only avoids a theoretical problem not seen in practice.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <b6f768023603dc2c4d130720bcecdbea459b7668.1634241019.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is needed for Linux to access RTC time.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <6233eb07c680d6c74427e11b9641958f98d53378.1634241019.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Issue a warning when using VOF (which is the default) but no -kernel
option given to let users know that it will likely fail as the guest
has nothing to run. It is not a hard error because it may still be
useful to start the machine without further options for testing or
inspecting it from monitor without actually booting it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <a4ec9a900df772b91e9f69ca7a0799d8ae293e5a.1634241019.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The CHRP spec this board confirms to only allows 2 GiB of system
memory below 4 GiB as the high 2 GiB is allocated to IO and system
resources. To avoid problems with memory overlapping these areas
restrict RAM to 2 GiB similar to mac_newworld.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <54f58229a69c9c1cca21bcecad700b3d7052edd5.1634241019.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When using u-boot as firmware with the taihu board, QEMU aborts with
this assertion:
ERROR:../accel/tcg/tcg-accel-ops.c:79:tcg_handle_interrupt: assertion failed:
(qemu_mutex_iothread_locked())
Running QEMU with "-d in_asm" shows that the crash happens when writing
to SPR 0x3f2, so we are missing to lock the iothread in the code path
here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211006071140.565952-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xive_esb_rw() is the common routine used for memory accesses on ESB
page. Use it for triggers also.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211006210546.641102-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 962104f044 ("hw/ppc: moved hcalls that depend on softmmu")
introduced a lot of unnecessary #include directives. Remove them.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211006170801.178023-1-philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 4d9b8ef9b5 ("target/ppc: Fix 64-bit decrementer") introduced
new int64t variables and broke the test triggering the decrementer
exception. Revert partially the change to evaluate both clause of the
if statement.
Reported-by: Coverity CID 1464061
Fixes: 4d9b8ef9b5 ("target/ppc: Fix 64-bit decrementer")
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211005053324.441132-1-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
and use them to set and test the ASSERTED bit of LSI sources.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211004212141.432954-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Until now, int was used as the return type for all the ELF
loader related functions. The returned value is the sum of all loaded
program headers "MemSize" fields.
Because of the overflow check in elf_ops.h, trying to load an ELF bigger
than INT_MAX will fail. Switch to ssize_t to remove this limitation.
Signed-off-by: Luc Michel <lmichel@kalray.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20211014194325.19917-1-lmichel@kalray.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The empty NUMA node, where no memory resides, are allowed. For
example, the following command line specifies two empty NUMA nodes.
With this, QEMU fails to boot because of the conflicting device-tree
node names, as the following error message indicates.
/home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \
-accel kvm -machine virt,gic-version=host \
-cpu host -smp 4,sockets=2,cores=2,threads=1 \
-m 1024M,slots=16,maxmem=64G \
-object memory-backend-ram,id=mem0,size=512M \
-object memory-backend-ram,id=mem1,size=512M \
-numa node,nodeid=0,cpus=0-1,memdev=mem0 \
-numa node,nodeid=1,cpus=2-3,memdev=mem1 \
-numa node,nodeid=2 \
-numa node,nodeid=3
:
qemu-system-aarch64: FDT: Failed to create subnode /memory@80000000: FDT_ERR_EXISTS
As specified by linux device-tree binding document, the device-tree
nodes for these empty NUMA nodes shouldn't be generated. However,
the corresponding NUMA node IDs should be included in the distance
map. The memory hotplug through device-tree on ARM64 isn't existing
so far and it's not necessary to require the user to provide a distance
map. Furthermore, the default distance map Linux generates may even be
sufficient. So this simply skips populating the device-tree nodes for
these empty NUMA nodes to avoid the error, so that QEMU can be started
successfully.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20211015124246.23073-1-gshan@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Upgrade the IORT table from B to E.b specification
revision (ARM DEN 0049E.b).
The SMMUv3 and root complex node have additional
fields. Also unique IORT node identifiers are
introduced: they are generated in sequential order.
They are not cross-referenced though.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20211014115643.756977-3-eric.auger@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The graphic_depth check is no longer required since commit df8abbbadf ("macfb:
add common monitor modes supported by the MacOS toolbox ROM") which introduced
code in macfb_common_realize() to only allow the resolutions/depths provided in
macfb_mode_table to be specified for each display type.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: df8abbbadf ("macfb: add common monitor modes supported by the MacOS toolbox ROM")
Message-Id: <20211020141810.7875-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This allows the programmer's switch to be triggered via the monitor for debugging
purposes. Since the CPU level 7 interrupt is level-triggered, use a timer to hold
the NMI active for 100ms before releasing it again.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewied-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211020134131.4392-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Explicitly wire up the remaining IRQs in classic mode to enable the use of
g_assert_not_reached() in the default case to detect any unexpected IRQs.
Add a comment explaining the IRQ routing differences in A/UX mode based
upon the comments in NetBSD (also noting that at least A/UX 3.0.1 still
uses classic mode).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211020134131.4392-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When the hardware is operating in classic mode the SONIC on-board Ethernet IRQ is
routed to nubus IRQ 9 instead of directly to the CPU at level 3. This does not
affect the framebuffer which although it exists in slot 9, has its own
dedicated IRQ on the Quadra 800 hardware.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211020134131.4392-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This enables the GLUE logic to change its CPU level IRQ routing depending upon
whether the hardware has been configured for A/UX mode.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211020134131.4392-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add a new auxmode GPIO that is updated when port B bit 6 is changed indicating
whether the hardware is configured for A/UX mode.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211020134131.4392-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In order to allow dynamic routing of IRQs to different IRQ levels on the CPU
depending upon port B bit 6, use GLUE IRQ numbers and map them to the the
corresponding CPU IRQ level accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211020134131.4392-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
On a Quadra 800 machine Linux sets via_alt_mapping to 1 and clears port B bit 6 to
ensure that the VIA1 IRQ is delivered at level 6 rather than level 1. Even though
QEMU doesn't yet emulate this behaviour, Linux still installs the VIA1 level 1 IRQ
handler regardless of the value of via_alt_mapping which is why the kernel has been
able to boot until now.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211020134131.4392-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to both Linux and NetBSD, port B bit 6 is used on the Quadra 800 to
configure the GLUE logic in A/UX mode. Whilst the name VIA1B_vMystery isn't
particularly descriptive, the patch leaves this to ensure that the constants
in mac_via.c remain in sync with Linux's mac_via.h.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211020134131.4392-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
PCI resource reserve capability should use LE format as all other PCI
things. If we don't then seabios won't boot:
=== PCI new allocation pass #1 ===
PCI: check devices
PCI: QEMU resource reserve cap: size 10000000000000 type io
PCI: secondary bus 1 size 10000000000000 type io
PCI: secondary bus 1 size 00200000 type mem
PCI: secondary bus 1 size 00200000 type prefmem
=== PCI new allocation pass #2 ===
PCI: out of I/O address space
This became more important since we started reserving IO by default,
previously no one noticed.
Fixes: e2a6290aab ("hw/pcie-root-port: Fix hotplug for PCI devices requiring IO")
Cc: marcel.apfelbaum@gmail.com
Fixes: 226263fb5c ("hw/pci: add QEMU-specific PCI capability to the Generic PCI Express Root Port")
Cc: zuban32s@gmail.com
Fixes: 6755e618d0 ("hw/pci: add PCI resource reserve capability to legacy PCI bridge")
Cc: jing2.liu@linux.intel.com
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This patch implements the multiqueue support for vhost-vdpa. This is
done simply by reading the number of queue pairs from the config space
and initialize the datapath and control path net client.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-11-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch implements the control virtqueue support for vhost. This
requires virtio-net to figure out the datapath queue pairs and control
virtqueue via is_datapath and pass the number of those two types
of virtqueues to vhost_net_start()/vhost_net_stop().
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-10-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces a new field in the vhost_dev structure to record
the last virtqueue index for the virtio device. This will be useful
for the vhost backends with 1:N model to start or stop the device
after all the vhost_dev structures were started or stopped.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-9-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Most of the time, "queues" really means queue pairs. So this patch
switch to use "queue_pairs" to avoid confusion.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-8-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We assume there's no cvq in the past, this is not true when we need
control virtqueue support for vhost-user backends. So this patch
implements the control virtqueue support for vhost-net. As datapath,
the control virtqueue is also required to be coupled with the
NetClientState. The vhost_net_start/stop() are tweaked to accept the
number of datapath queue pairs plus the the number of control
virtqueue for us to start and stop the vhost device.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-7-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Unlike vhost-kernel, vhost-vdpa adapts a single device multiqueue
model. So we need to simply use virtqueue index as the vhost virtqueue
index. This is a must for multiqueue to work for vhost-vdpa.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-4-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Vhost-vdpa uses one device multiqueue queue (pairs) model. So we need
to classify the one time request (e.g SET_OWNER) and make sure those
request were only called once per device.
This is used for multiqueue support.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-3-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit f3a8505656 ("qdev/qbus: add hidden device support") has
introduced a generic way to hide a device but it has modified
qdev_device_add() to check a specific option of the failover device,
"failover_pair_id", before calling the generic mechanism.
It's not needed (and not generic) to do that in qdev_device_add() because
this is also checked by the failover_hide_primary_device() function that
uses the generic mechanism to hide the device.
Cc: Jens Freimann <jfreimann@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20211019071532.682717-3-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
The hide_device helper can be called several times for the same
devices as it shouldn't change any state and should only return an
information.
But not to rely anymore on QemuOpts we have introduced a new field
to store the parameters of the device and don't allow to update it
once it is done.
And as the function is called several times, we ends with:
warning: Cannot attach more than one primary device to 'virtio0'
That is not only a warning as it prevents to hide the device and breaks
failover.
Fix that by checking the device id.
Now, we fail only if the virtio-net device is really used by two different
devices, for instance:
-device virtio-net-pci,id=virtio0,failover=on,... \
-device vfio-pci,id=hostdev0,failover_pair_id=virtio0,... \
-device e1000e,id=e1000e0,failover_pair_id=virtio0,... \
will exit with:
Cannot attach more than one primary device to 'virtio0': 'hostdev0' and 'e1000e0'
Fixes: 259a10dbcb ("virtio-net: Store failover primary opts pointer locally")
Cc: kwolf@redhat.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20211019071532.682717-2-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
In case of device resume after suspend, VQ notifier MR still valid.
Duplicated registrations explode memory block list and slow down device
resume.
Fixes: 44866521bd ("vhost-user: support registering external host notifiers")
Cc: tiwei.bie@intel.com
Cc: qemu-stable@nongnu.org
Cc: Yuwei Zhang <zhangyuwei.9149@bytedance.com>
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Message-Id: <20211008080215.590292-1-xuemingl@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch provides a PCI bus interface to the vhost-user-rng backend.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Message-Id: <20211012205904.4106769-3-mathieu.poirier@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a random number generator (RNG) backend that communicates
with a vhost-user server to retrieve entropy. That way other VMM
that comply with the vhost user protocl can use the same vhost-user
daemon without having to write yet another RNG driver.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Message-Id: <20211012205904.4106769-2-mathieu.poirier@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drop base_name and turn generic_name into
"virtio-iommu-pci". This is more in line with
other modern-only devices.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20211013191755.767468-3-eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove the non transitional name for virtio iommu. Like other
devices introduced after 1.0 spec, the virtio-iommu does
not need it.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20211013191755.767468-2-eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Check vdpa device range before updating memory regions so we don't add
any outside of it, and report the invalid change if any.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20211014141236.923287-4-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Abstract this operation, that will be reused when validating the region
against the iova range that the device supports.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211014141236.923287-3-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Following the logic of commit 56918a126a ("memory: Add RAM_PROTECTED
flag to skip IOMMU mappings") with VFIO, skip memory sections
inaccessible via normal mechanisms, including DMA.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211014141236.923287-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Use via_isa_set_irq() which better encapsulates irq handling in the
vt82xx model and avoids using isa_get_irq() that has a comment saying
it should not be used.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <26cb1848c9fc0360df7a57c2c9ba5e03c4a692b5.1634259980.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Other functions in the VT82xx chips need to raise ISA interrupts. Keep
a reference to them in the device state and add via_isa_set_irq() to
allow setting their state.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <778c04dc2c8affac060b8edf9e8d7dab3c3e04eb.1634259980.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The vt82c686b_realize and vt8231_realize methods are almost identical,
factor out the common parts to a via_isa_realize function to avoid
code duplication.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <7cb7a16ff4daf8f48d576246255bea1fd355207c.1634259980.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This model only works as a function of the via superio chip not as a
standalone PCI device.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211015092159.3E863748F57@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Generate FDT on our own if no dtb argument supplied.
Avoid introducing unused device in FDT with user supplied dtb.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
[PMD: Fix coding style]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211002184539.169-4-jiaxun.yang@flygoat.com>
ELF kernel allows us debugging much easier with DWARF symbols.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: Fix coding style]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211002184539.169-3-jiaxun.yang@flygoat.com>
Use memmap array to uinfy address of memory map.
That would allow us reuse address information for FDT generation.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: Use local 'regaddr' in gen_firmware(), fix coding style]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211002184539.169-2-jiaxun.yang@flygoat.com>
This reverts commit 1b36e4f5a5.
Despite a comment saying why cpu_common_props cannot be placed in
a file that is compiled once, it was moved anyway. Revert that.
Since then, Property is not defined in hw/core/cpu.h, so it is now
easier to declare a function to install the properties rather than
the Property array itself.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Simplification of one of the SIGP instructions on s390x
* Cornelia stepping down as maintainer in some subsystems
* Update the dtc submodule to a proper release version
-----BEGIN PGP SIGNATURE-----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=fWoj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth/tags/pull-request-2021-10-15' into staging
* Check kernel command line size on s390x
* Simplification of one of the SIGP instructions on s390x
* Cornelia stepping down as maintainer in some subsystems
* Update the dtc submodule to a proper release version
# gpg: Signature made Fri 15 Oct 2021 02:11:13 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
* remotes/thuth/tags/pull-request-2021-10-15:
dtc: Update to version 1.6.1
s390x virtio-ccw machine: step down as maintainer
s390x/kvm: step down as maintainer
vfio-ccw: step down as maintainer
s390x: sigp: Force Set Architecture to return Invalid Parameter
s390x/ipl: check kernel command line size
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
QDicts are both what QMP natively uses and what the keyval parser
produces. Going through QemuOpts isn't useful for either one, so switch
the main device creation function to QDicts. By sharing more code with
the -object/object-add code path, we can even reduce the code size a
bit.
This commit doesn't remove the detour through QemuOpts from any code
path yet, but it allows the following commits to do so.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-15-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Don't go through the global QemuOptsList, it is state of the legacy
command line parser and we will create devices that are not contained
in it. It is also just the command line configuration and not
necessarily the current runtime state.
Instead, look at the qdev device tree which has the current state of all
existing devices.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-14-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of accessing the global QemuOptsList, which really belong to the
command line parser and shouldn't be accessed from devices, store a
pointer to the QemuOpts in a new VirtIONet field.
This is not the final state, but just an intermediate step to get rid of
QemuOpts in devices. It will later be replaced with an options QDict.
Before this patch, two "primary" devices could be hidden for the same
standby device, but only one of them would actually be enabled and the
other one would be kept hidden forever, so this doesn't make sense.
After this patch, configuring a second primary device is an error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-13-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
hide_device() is used for virtio-net failover, where the standby virtio
device delays creation of the primary device. It only makes sense to
have a single primary device for each standby device. Adding a second
one should result in an error instead of hiding it and never using it
afterwards.
Prepare for this by adding an Error parameter to the hide_device()
callback where virtio-net is informed about adding a primary device.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-12-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qdev_set_id() is mostly used when the user adds a device (using
-device cli option or device_add qmp command). This commit adds
an error parameter to handle the case where the given id is
already taken.
Also document the function and add a return value in order to
be able to capture success/failure: the function now returns the
id in case of success, or NULL in case of failure.
The commit modifies the 2 calling places (qdev-monitor and
xen-legacy-backend) to add the error object parameter.
Note that the id is, right now, guaranteed to be unique because
all ids came from the "device" QemuOptsList where the id is used
as key. This addition is a preparation for a future commit which
will relax the uniqueness.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-10-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
DeviceState.id is a pointer to a string that is stored in the QemuOpts
object DeviceState.opts and freed together with it. We want to create
devices without going through QemuOpts in the future, so make this a
separately allocated string.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211008133442.141332-9-kwolf@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some network backends (vhost-user and vhost-vdpa) work only with
specific devices. At startup, they second guess what the command line
option handling will do and error out if they think a non-virtio device
will attach to them.
This second guessing is not only ugly, it can lead to wrong error
messages ('-device floppy,netdev=foo' should complain about an unknown
property, not about the wrong kind of network device being attached) and
completely ignores hotplugging.
Add a callback where backends can check compatibility with a device when
it actually tries to attach, even on hotplug.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-2-kwolf@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pass CONFIG_FUZZ via host_kconfig, and use it to select the
sparse-mem device.
Cc: Alexander Oleinik <alxndr@bu.edu>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20211007130829.632254-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check if the provided kernel command line exceeds the maximum size of the s390x
Linux kernel command line size, which is 896 bytes.
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-Id: <20211006092631.20732-1-mhartmay@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[thuth: Adjusted format specifier for size_t]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit 93ddefbc3c.
The commit included code under the APSL 2.0, which is incompatible
with the GPL v2.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move qmp_query_sgx() and hmp_info_sgx() from target/i386/monitor.c
to hw/i386/sgx.c, removing the sgx_get_info() indirection and the
"hw/i386/sgx.h" header.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211007175612.496366-5-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move qmp_query_sgx_capabilities() from target/i386/monitor.c to
hw/i386/sgx.c, removing the sgx_get_capabilities() indirection.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211007175612.496366-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211007175612.496366-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"sysemu/sev.h" is only used from x86-specific files. Let's move it
to include/hw/i386, and merge it with target/i386/sev.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211007161716.453984-16-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SEV is a x86 specific feature, and the "sev_i386.h" header
is already in target/i386/. Rename it as "sev.h" to simplify.
Patch created mechanically using:
$ git mv target/i386/sev_i386.h target/i386/sev.h
$ sed -i s/sev_i386.h/sev.h/ $(git grep -l sev_i386.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20211007161716.453984-15-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The register index is currently printed and this is confusing.
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20211005052604.1674891-3-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This model implements enough behaviour to do basic functionality tests
such as device initialisation and read out of dummy sample values. The
sample value generation strategy is similar to the STM ADC already in
the tree.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
[clg : support for multiple engines (AST2600) ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[pdel : refactored engine register struct fields to regs[] array field]
[pdel : added guest-error checking for upper-8 channel regs in AST2600]
[pdel : allow 16-bit reads of the channel data registers]
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20211005052604.1674891-2-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The gpio array is declared as a dense array:
qemu_irq gpios[ASPEED_GPIO_NR_PINS];
(AST2500 has 228, AST2400 has 216, AST2600 has 208)
However, this array is used like a matrix of GPIO sets
(e.g. gpio[NR_SETS][NR_PINS_PER_SET] = gpio[8][32])
size_t offset = set * GPIOS_PER_SET + gpio;
qemu_set_irq(s->gpios[offset], !!(new & mask));
This can result in an out-of-bounds access to "s->gpios" because the
gpio sets do _not_ have the same length. Some of the groups (e.g.
GPIOAB) only have 4 pins. 228 != 8 * 32 == 256.
To fix this, I converted the gpio array from dense to sparse, to that
match both the hardware layout and this existing indexing code.
Fixes: 4b7f956862 ("hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500")
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20211008033501.934729-2-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Some of the pin declarations in the Aspeed GPIO module were incorrect,
probably because of confusion over which bits in the input and output
uint32_t's correspond to which groups in the label array. Since the
uint32_t literals are in big endian, it's sort of the opposite of what
would be intuitive. The least significant bit in ast2500_set_props[6]
corresponds to GPIOY0, not GPIOAB7.
GPIOxx indicates input and output capabilities, GPIxx indicates only
input, GPOxx indicates only output.
AST2500:
- Previously had GPIW0..GPIW7 and GPIX0..GPIX7, that's correct.
- Previously had GPIOY0..GPIOY3, should have been GPIOY0..GPIOY7.
- Previously had GPIOAB0..GPIOAB3 and GPIAB4..GPIAB7, should only have
been GPIOAB0..GPIOAB3.
AST2600:
- GPIOT0..GPIOT7 should have been GPIT0..GPIT7.
- GPIOU0..GPIOU7 should have been GPIU0..GPIU7.
- GPIW0..GPIW7 should have been GPIOW0..GPIOW7.
- GPIOY0..GPIOY7 and GPIOZ0...GPIOZ7 were disabled.
Fixes: 4b7f956862 ("hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500")
Fixes: 36d737ee82 ("hw/gpio: Add in AST2600 specific implementation")
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Message-Id: <20210928032456.3192603-2-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce an AspeedI2CBus SysBusDevice model and attach the associated
memory region and IRQ to the newly instantiated objects.
Before this change, the I2C bus IRQs were all attached to the
SysBusDevice model of the I2C controller. Adapt the AST2600 SoC
realize routine to take into account this change.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The AST2400 SPI controller has a transitional HW interface and it
stores the address width currently in use in a different register than
all the other SMC controllers. It needs special handling when working
in 4B mode.
Make it clear through a class handler. This also removes another use
of the segments array.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This simplifies the reset handler and has the benefit to remove some
"bad" use of the segments array as an identifier of the controller model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AspeedSMCFlash is a small structure representing the AHB memory window
through which the contents of a flash device can be accessed with MMIOs.
Introduce an AspeedSMCFlash SysBusDevice model and attach the associated
memory region to the newly instantiated objects.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
'cs' is a more appropriate name to index SPI flash devices.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AspeedSMCFlash::size is only used to compute the initial size of the
boot_rom region. Not very useful, so directly call memory_region_size()
instead.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no need to keep a reference of the flash qdev in the AspeedSMCFlash
state: the SPI bus takes ownership and will release its resources. Remove
AspeedSMCFlash::flash.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The characteristics of the Aspeed controllers are described in a
AspeedSMCController structure which is redundant with the
AspeedSMCClass. Move all attributes under the class and adapt the code
to use class attributes instead.
This is a large change but it is functionally equivalent.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no real reason to use this name. It's simply nice to have in
the monitor output but it's a burden for the following patch which
removes the AspeedSMCController structure describing the controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
It unifies the errors reported by the Aspeed SMC model and also
removes some use of ctrl->name which will help us for the next
patches.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The Aspeed SoCs have a dual boot function for firmware fail-over
recovery. The system auto-reboots from the second flash if the main
flash does not boot successfully within a certain amount of time. This
function is called alternate boot (ABR) in the FMC controllers.
On AST2400/AST2500, ABR is enabled by hardware strapping in SCU70 to
enable the 2nd watchdog timer, on AST2600, through register SCU510.
If the boot on the the main flash succeeds, the firmware should
disable the 2nd watchdog timer. If not, the BMC is reset and the CE0
and CE1 mappings are swapped to restart the BMC from the 2nd flash.
On the AST2600, the ABR registers controlling the 2nd watchdog timer
were moved from the watchdog register to the FMC controller and the
FMC model should be able to control WDT2 through its own register set.
This requires more work. For now, add dummy read/write handlers to let
the FW disable the 2nd watchdog without error.
Reviewed-by: Peter Delevoryas <pdel@fb.com>
Reported-by: Peter Delevoryas <pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Whilst the in-built Quadra 800 framebuffer exists within the Nubus address
space for slot 9, it has its own dedicated interrupt on VIA2. Force the
macfb device to occupy slot 9 in the q800 machine and wire its IRQ to the
separate video interrupt since this is what is expected by the MacOS
interrupt handler.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-14-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The MacOS driver expects a 60.15Hz vertical blank interrupt to be generated by
the framebuffer which in turn schedules the mouse driver via the Vertical Retrace
Manager.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to Apple Technical Note HW26: "Macintosh Quadra Built-In Video" the
in-built framebuffer encodes each 24-bit pixel into 4 bytes. Adjust the 24-bit
RGB pixel encoding accordingly which agrees with the encoding expected by MacOS
when changing into 24-bit colour mode.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The MacOS driver expects the RGB values for the pixel to be in entries 0 and 1
of the colour palette.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The monitor modes table is found by experimenting with the Monitors Control
Panel in MacOS and analysing the reads/writes. From this it can be found that
the mode is controlled by writes to the DAFB_MODE_CTRL1 and DAFB_MODE_CTRL2
registers.
Implement the first block of DAFB registers as a register array including the
existing sense register, the newly discovered control registers above, and also
the DAFB_MODE_VADDR1 and DAFB_MODE_VADDR2 registers which are used by NetBSD to
determine the current video mode.
These experiments also show that the offset of the start of video RAM and the
stride can change depending upon the monitor mode, so update macfb_draw_graphic()
and both the BI_MAC_VADDR and BI_MAC_VROW bootinfo for the q800 machine
accordingly.
Finally update macfb_common_realize() so that only the resolution and depth
supported by the display type can be specified on the command line, and add an
error hint showing the list of supported resolutions and depths if the user tries
to specify an invalid display mode.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since the available resolutions and colour depths are determined by the attached
display type, add a qdev property to allow the display type to be specified.
The main resolutions of interest are high resolution 1152x870 with 8-bit colour
and SVGA resolution up to 800x600 with 24-bit colour so update the q800 machine
to allow high resolution mode if specified and otherwise fall back to SVGA.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The MacOS toolbox ROM uses the monitor sense to detect the display type and then
offer a fixed set of resolutions and colour depths accordingly. Implement the
monitor sense using information found in Apple Technical Note HW26: "Macintosh
Quadra Built-In Video" along with some local experiments.
Since the default configuration is 640 x 480 with 8-bit colour then hardcode
the sense register to return MACFB_DISPLAY_VGA for now.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Currently macfb_common_realize() defines the framebuffer RAM memory region as
being non-migrateable but then immediately registers it for migration. Replace
memory_region_init_ram_nomigrate() with memory_region_init_ram() which is clearer
and does exactly the same thing.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The palette_current index counter has a maximum size of 256 * 3 to cover a full
color palette of 256 RGB entries. Linux assumes that the palette_current index
wraps back around to zero after writing 256 RGB entries so ensure that
palette_current is reset at this point to prevent data corruption within
MacfbState.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
During realize memory_region_init_ram_nomigrate() is used to initialise the RAM
memory region used for the framebuffer but the owner object reference is
incorrect since MacFbState is a typedef and not a QOM type.
Change the memory region owner to be the corresponding DeviceState to fix the
issue and prevent random crashes during macfb_common_realize().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 8ac919a065 ("hw/m68k: add Nubus macfb video card")
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
As per the current Error API best practices, change macfb_commom_realize() to return
a boolean indicating success to reduce errp boiler-plate handling code. Note that
memory_region_init_ram_nomigrate() is also updated to use &error_abort to indicate
a non-recoverable error, matching the behaviour recommended after similar
discussions on memory API failures for the recent nubus changes.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Make sure any errors that occur within the macfb realize chain are detected
and handled correctly to prevent crashes and to ensure that error messages are
reported back to the user.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211007221253.29024-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Mark the shakti_c machine as not user creatable.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/639
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <c617a04d4e3dd041a3427b47a1b1d5ab475a2edd.1632871759.git.alistair.francis@wdc.com>
At present the codes detect whether the DMA channel is claimed by:
claimed = !!s->chan[ch].control & CONTROL_CLAIM;
As ! has higher precedence over & (bitwise and), this is essentially
claimed = (!!s->chan[ch].control) & CONTROL_CLAIM;
which is wrong, as any non-zero bit set in the control register will
produce a result of a claimed channel.
Fixes: de7c7988d2 ("hw/dma: sifive_pdma: reset Next* registers when Control.claim is set")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210927072124.1564129-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
- Embed SerialMM in MchpPfSoCMMUartState and QOM-initialize it
- Alias SERIAL_MM 'chardev' property on MCHP_PFSOC_UART
- Forward SerialMM sysbus IRQ in mchp_pfsoc_mmuart_realize()
- Add DeviceReset() method
- Add vmstate structure for migration
- Register device in 'input' category
- Keep mchp_pfsoc_mmuart_create() behavior
Note, serial_mm_init() calls qdev_set_legacy_instance_id().
This call is only needed for backwards-compatibility of incoming
migration data with old versions of QEMU which implemented migration
of devices with hand-rolled code. Since this device didn't previously
handle migration at all, then it doesn't need to set the legacy
instance ID.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210925133407.1259392-4-f4bug@amsat.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Our device have 2 different I/O regions:
- a 16550 UART mapped for 32-bit accesses
- 13 extra registers
Instead of mapping each region on the main bus, introduce
a container, map the 2 devices regions on the container,
and map the container on the main bus.
Before:
(qemu) info mtree
...
0000000020100000-000000002010001f (prio 0, i/o): serial
0000000020100020-000000002010101f (prio 0, i/o): mchp.pfsoc.mmuart
0000000020102000-000000002010201f (prio 0, i/o): serial
0000000020102020-000000002010301f (prio 0, i/o): mchp.pfsoc.mmuart
0000000020104000-000000002010401f (prio 0, i/o): serial
0000000020104020-000000002010501f (prio 0, i/o): mchp.pfsoc.mmuart
0000000020106000-000000002010601f (prio 0, i/o): serial
0000000020106020-000000002010701f (prio 0, i/o): mchp.pfsoc.mmuart
After:
(qemu) info mtree
...
0000000020100000-0000000020100fff (prio 0, i/o): mchp.pfsoc.mmuart
0000000020100000-000000002010001f (prio 0, i/o): serial
0000000020100020-0000000020100fff (prio 0, i/o): mchp.pfsoc.mmuart.regs
0000000020102000-0000000020102fff (prio 0, i/o): mchp.pfsoc.mmuart
0000000020102000-000000002010201f (prio 0, i/o): serial
0000000020102020-0000000020102fff (prio 0, i/o): mchp.pfsoc.mmuart.regs
0000000020104000-0000000020104fff (prio 0, i/o): mchp.pfsoc.mmuart
0000000020104000-000000002010401f (prio 0, i/o): serial
0000000020104020-0000000020104fff (prio 0, i/o): mchp.pfsoc.mmuart.regs
0000000020106000-0000000020106fff (prio 0, i/o): mchp.pfsoc.mmuart
0000000020106000-000000002010601f (prio 0, i/o): serial
0000000020106020-0000000020106fff (prio 0, i/o): mchp.pfsoc.mmuart.regs
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Message-id: 20210925133407.1259392-3-f4bug@amsat.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current MCHP_PFSOC_MMUART_REG_SIZE definition represent the
size occupied by all the registers. However all registers are
32-bit wide, and the MemoryRegionOps handlers are restricted to
32-bit:
static const MemoryRegionOps mchp_pfsoc_mmuart_ops = {
.read = mchp_pfsoc_mmuart_read,
.write = mchp_pfsoc_mmuart_write,
.impl = {
.min_access_size = 4,
.max_access_size = 4,
},
Avoid being triskaidekaphobic, simplify by using the number of
registers.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210925133407.1259392-2-f4bug@amsat.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The category of sifive_uart device is not set. Put it into the
'input' category.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210926105003.2716-3-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The category of shakti_uart device is not set. Put it into the
'input' category.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210926105003.2716-2-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The category of ibex_uart device is not set. Put it into the
'input' category.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210926105003.2716-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Linux limits the size of iovecs to 1024 (UIO_MAXIOV in the kernel
sources, IOV_MAX in POSIX). Because of this, on some host adapters
requests with many iovecs are rejected with -EINVAL by the
io_submit() or readv()/writev() system calls.
In fact, the same limit applies to SG_IO as well. To fix both the
EINVAL and the possible performance issues from using fewer iovecs
than allowed by Linux (some HBAs have max_segments as low as 128),
introduce a separate entry in BlockLimits to hold the max_segments
value from sysfs. This new limit is used only for SG_IO and clamped
to bs->bl.max_iov anyway, just like max_hw_transfer is clamped to
bs->bl.max_transfer.
Reported-by: Halil Pasic <pasic@linux.ibm.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Cc: qemu-stable@nongnu.org
Fixes: 18473467d5 ("file-posix: try BLKSECTGET on block devices too, do not round to power of 2", 2021-06-25)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923130436.1187591-1-pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A huge acpi refactoring.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmFcxB8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpldIH/jpPtsQr8oC1RrP8lTmiWh9vC9c3Xa5xfH7k
lXOn01kPprAWsm+qpoydOKJk/6v8TJ2E5nQ5AIU5EQvOEqSp8VnO0swHvTC7bwBa
1mGBvN3Ssjd/XFcgEc1xRJMzTO+Z1uF9tlq9ymDhLDtnuswyu5fl71NoXNVqE4st
r9wQrDX1lgzAUzL2QBr/g8wzx7aDS9HIyTrbl+ehzVEBrNKggo+AQgtSpyS1lxEC
NCIirfoaGgTKKrMASms5dXW44XNL/lXsZtheYrfF5nLiatCcthJNGnZ/BhUelH2B
EjXax7zs3IpWvRoGxRyqxElWgaCA2IXVvtLsT3WBqrTmi0Hoku8=
=nFLU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio: features, fixes
A huge acpi refactoring.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 05 Oct 2021 02:31:11 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
* remotes/mst/tags/for_upstream: (47 commits)
hw/i386/amd_iommu: Add description/category to TYPE_AMD_IOMMU_PCI
hw/i386/amd_iommu: Rename SysBus specific functions as amdvi_sysbus_X()
hw/i386/amd_iommu: Rename amdviPCI TypeInfo
nvdimm: release the correct device list
virtio-balloon: Fix page-poison subsection name
bios-tables-test: Update ACPI DSDT table golden blobs for q35
hw/i386/acpi: fix conflicting IO address range for acpi pci hotplug in q35
bios-tables-test: allow changes in DSDT ACPI tables for q35
acpi: AcpiGenericAddress no longer used to map/access fields of MMIO, drop packed attribute
acpi: remove no longer used build_header()
acpi: build_facs: use build_append_int_noprefix() API to compose table
acpi: arm/virt: build_gtdt: use acpi_table_begin()/acpi_table_end() instead of build_header()
acpi: arm/virt: build_spcr: use acpi_table_begin()/acpi_table_end() instead of build_header()
acpi: arm/virt: build_spcr: fix invalid cast
acpi: arm/virt: convert build_iort() to endian agnostic build_append_FOO() API
acpi: arm: virt: build_iort: use acpi_table_begin()/acpi_table_end() instead of build_header()
acpi: arm: virt: build_dsdt: use acpi_table_begin()/acpi_table_end() instead of build_header()
acpi: build_dsdt_microvm: use acpi_table_begin()/acpi_table_end() instead of build_header()
acpi: arm/virt: madt: use build_append_int_noprefix() API to compose MADT table
acpi: x86: madt: use build_append_int_noprefix() API to compose MADT table
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TYPE_AMD_IOMMU_PCI is user-creatable but not well described.
Implement its class_init() handler to add it to the 'Misc
devices' category, and add a description.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210926175648.1649075-4-f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Various functions are SysBus specific. Rename them using the
consistent amdvi_sysbus_XXX() pattern, to differentiate them
from PCI specific functions (which we'll add in the next
commit).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210926175648.1649075-3-f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per 'QEMU Coding Style':
Naming
======
Variables are lower_case_with_underscores; easy to type and read.
Rename amdviPCI variable as amdvi_pci.
amdviPCI_register_types() register more than PCI types:
TYPE_AMD_IOMMU_DEVICE inherits TYPE_X86_IOMMU_DEVICE which
itself inherits TYPE_SYS_BUS_DEVICE.
Rename it more generically as amdvi_register_types().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210926175648.1649075-2-f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-Id: <20210624110415.187164-1-lizhijian@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
The subsection name for page-poison was typo'd as:
vitio-balloon-device/page-poison
Note the missing 'r' in virtio.
When we have a machine type that enables page poison, and the guest
enables it (which needs a new kernel), things fail rather unpredictably.
The fallout from this is that most of the other subsections fail to
load, including things like the feature bits in the device, one
possible fallout is that the physical addresses of the queues
then get aligned differently and we fail with an error about
last_avail_idx being wrong.
It's not obvious to me why this doesn't produce a more obvious failure,
but virtio's vmstate loading is a bit open-coded.
Fixes: 7483cbbaf8 ("virtio-balloon: Implement support for page poison reporting feature")
bz: https://bugzilla.redhat.com/show_bug.cgi?id=1984401
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210914131716.102851-1-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-35-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drop usage of packed structures and explicit endian
conversions when building table and use endian agnostic
build_append_int_noprefix() API to build it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-34-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
while at it, replace packed structure with endian agnostic
build_append_FOO() API.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-33-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
while at it, replace packed structure with endian agnostic
build_append_FOO() API.
PS:
Spec is Microsoft hosted, however 1.02 is no where to be found
(MS lists only the current revision) and the current revision is 1.07,
so bring comments in line with 1.07 as this is the only available spec.
There is no content change between originally implemented 1.02
(using QEMU code as reference) and 1.07. The only change is renaming
'Reserved2' field to 'Language', with the same 0 value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-32-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
implicit cast to structure uint8_t member didn't raise error when
assigning value from incorrect enum, but when using build_append_gas()
(next patch) it will error out with (clang):
implicit conversion from enumeration type 'AmlRegionSpace'
to different enumeration type 'AmlAddressSpace'
fix cast error by using correct AML_AS_SYSTEM_MEMORY enum
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-31-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drop usage of packed structures and explicit endian conversions
when building IORT table use endian agnostic build_append_int_noprefix()
API to build it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210924122802.1455362-30-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-29-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-28-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-27-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drop usage of packed structures and explicit endian conversions
when building MADT table for arm/x86 and use endian agnostic
build_append_int_noprefix() API to build it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-26-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drop usage of packed structures and explicit endian conversions
when building MADT table for arm/x86 and use endian agnostic
build_append_int_noprefix() API to build it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-25-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of composing disabled _MAT entry and then later on
patching it to enabled for hotpluggbale CPUs in DSDT,
set it to enabled at the time _MAT entry is built.
It will allow to drop usage of packed structures in
following patches when build_madt() is switched to use
build_append_int_noprefix() API.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-24-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-22-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-21-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-20-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
While at it switch to build_append_int_noprefix() to build
table entries tables.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-19-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drop usage of packed structures and explicit endian conversions
when building SRAT tables for arm/x86 and use endian agnostic
build_append_int_noprefix() API to build it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-18-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
While at it switch to build_append_int_noprefix() to build
table entries (which also removes some manual offset
calculations)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-17-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
While at it switch to build_append_int_noprefix() to build
table entries (which also removes some manual offset
calculations).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-16-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
while at it convert build_hpet() to endian agnostic
build_append_FOO() API
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210924122802.1455362-15-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-14-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-13-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-12-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Also since acpi_table_begin() reserves space only for standard header
while previous acpi_data_push() reserved the header + 4 bytes field,
add 4 bytes 'Reserved' field into nvdimm_build_nfit() which didn't
have it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Also since acpi_table_begin() reserves space only for standard header
while previous acpi_data_push() reserved the header + 4 bytes field,
add 4 bytes 'Reserved' field into hmat_build_table_structs()
which didn have it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Dongjiu Geng <gengdongjiu1@gmail.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
While at it switch to build_append_int_noprefix() to build
entries to other tables (which also removes some manual offset
calculations).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offests magic from API user.
While at it switch to build_append_int_noprefix() to build
entries to other tables (which also removes some manual offset
calculations).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Patch introduces acpi_table_begin()/ acpi_table_end() API
that hides pointer/offset arithmetic from user as opposed
to build_header(), to prevent errors caused by it [1].
acpi_table_begin():
initializes table header and keeps track of
table data/offsets
acpi_table_end():
sets actual table length and tells bios loader
where table is for the later initialization on
guest side.
1) commits
bb9feea431 x86: acpi: use offset instead of pointer when using build_header()
4d027afeb3 Virt: ACPI: fix qemu assert due to re-assigned table data address
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
virtio-vsock features, like VIRTIO_VSOCK_F_SEQPACKET, can be handled
by vhost-vsock-common parent class. In this way, we can reuse the
same code for all virtio-vsock backends (i.e. vhost-vsock,
vhost-user-vsock).
Let's move `seqpacket` property to vhost-vsock-common class, add
vhost_vsock_common_get_features() used by children, and disable
`seqpacket` for vhost-user-vsock device for machine types < 6.2.
The behavior of vhost-vsock device doesn't change; vhost-user-vsock
device now supports `seqpacket` property.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210921161642.206461-3-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 1e08fd0a46 ("vhost-vsock: SOCK_SEQPACKET feature bit support")
enabled the SEQPACKET feature bit.
This commit is released with QEMU 6.1, so if we try to migrate a VM where
the host kernel supports SEQPACKET but machine type version is less than
6.1, we get the following errors:
Features 0x130000002 unsupported. Allowed features: 0x179000000
Failed to load virtio-vhost_vsock:virtio
error while loading state for instance 0x0 of device '0000:00:05.0/virtio-vhost_vsock'
load of migration failed: Operation not permitted
Let's disable the feature bit for machine types < 6.1.
We add a new OnOffAuto property for this, called `seqpacket`.
When it is `auto` (default), QEMU behaves as before, trying to enable the
feature, when it is `on` QEMU will fail if the backend (vhost-vsock
kernel module) doesn't support it.
Fixes: 1e08fd0a46 ("vhost-vsock: SOCK_SEQPACKET feature bit support")
Cc: qemu-stable@nongnu.org
Reported-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210921161642.206461-2-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Both virtqueue_packed_get_avail_bytes() and
virtqueue_split_get_avail_bytes() access the region cache, but
their caller also does. Simplify by having virtqueue_get_avail_bytes
calling both with RCU lock held, and passing the caches as argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210906104318.1569967-4-philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
vring_get_region_caches() must be called with the RCU read lock
acquired. virtqueue_packed_drop_all() does not, and uses the
'caches' pointer. Fix that by using the RCU_READ_LOCK_GUARD()
macro.
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210906104318.1569967-3-philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
If SEV is enabled and a kernel is passed via -kernel, pass the hashes of
kernel/initrd/cmdline in an encrypted guest page to OVMF for SEV
measured boot.
Co-developed-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210930054915.13252-3-dovmurik@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We might not start at the beginning of the memory region. Let's
calculate the offset into the memory region via the difference in the
host addresses.
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Fixes: ffab1be706 ("tpm: clear RAM when "memory overwrite" requested")
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Claudio Fontana <cfontana@suse.de>
Cc: Thomas Huth <thuth@redhat.com>
Cc: "Alex Bennée" <alex.bennee@linaro.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210727082545.17934-2-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As we might not always have a device id, it is impossible to always
match MEMORY_DEVICE_SIZE_CHANGE events to an actual device. Let's
include the qom-path in the event, which allows for reliable mapping of
events to devices.
Fixes: 722a3c783e ("virtio-pci: Send qapi events when the virtio-mem size changes")
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210929162445.64060-3-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Apparently, we don't have to duplicate the string.
Fixes: 722a3c783e ("virtio-pci: Send qapi events when the virtio-mem size changes")
Cc: qemu-stable@nongnu.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210929162445.64060-2-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM implements some Hyper-V 2016 functions so providing WS2008R2 version
is somewhat incorrect. While generally guests shouldn't care about it
and always check feature bits, it is known that some tools in Windows
actually check version info.
For compatibility reasons make the change for 6.2 machine types only.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210902093530.345756-9-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Put both sanity-check of the input SMP configuration and sanity-check
of the output SMP configuration uniformly in the generic parser. Then
machine_set_smp() will become cleaner, also all the invalid scenarios
can be tested only by calling the parser.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-16-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now we have a common structure SMPCompatProps used to store information
about SMP compatibility stuff, so we can also move smp_prefer_sockets
there for cleaner code.
No functional change intended.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-15-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now we have a generic smp parser for all arches, and there will
not be any other arch specific ones, so let's remove the callback
from MachineClass and call the parser directly.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-14-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the only difference between smp_parse and pc_smp_parse
is the support of dies parameter and the related error reporting.
With some arch compat variables like "bool dies_supported", we can
make smp_parse generic enough for all arches and the PC specific
one can be removed.
Making smp_parse() generic enough can reduce code duplication and
ease the code maintenance, and also allows extending the topology
with more arch specific members (e.g., clusters) in the future.
Suggested-by: Andrew Jones <drjones@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-13-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all the possible topology parameters are integrated in struct
CpuTopology, tweak the order of topology members to be "cpus/sockets/
dies/cores/threads/maxcpus" for readability and consistency. We also
tweak the comment by adding explanation of dies parameter.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210929025816.21076-12-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the sanity-check of smp_cpus and max_cpus against mc in function
machine_set_smp(), we are now using ms->smp.max_cpus for the check
but using current_machine->smp.max_cpus in the error message.
Tweak this by uniformly using the local ms.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210929025816.21076-11-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the real SMP hardware topology world, it's much more likely that
we have high cores-per-socket counts and few sockets totally. While
the current preference of sockets over cores in smp parsing results
in a virtual cpu topology with low cores-per-sockets counts and a
large number of sockets, which is just contrary to the real world.
Given that it is better to make the virtual cpu topology be more
reflective of the real world and also for the sake of compatibility,
we start to prefer cores over sockets over threads in smp parsing
since machine type 6.2 for different arches.
In this patch, a boolean "smp_prefer_sockets" is added, and we only
enable the old preference on older machines and enable the new one
since type 6.2 for all arches by using the machine compat mechanism.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-10-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have two requirements for a valid SMP configuration:
the product of "sockets * cores * threads" must represent all the
possible cpus, i.e., max_cpus, and then must include the initially
present cpus, i.e., smp_cpus.
So we only need to ensure 1) "sockets * cores * threads == maxcpus"
at first and then ensure 2) "maxcpus >= cpus". With a reasonable
order of the sanity check, we can simplify the error reporting code.
When reporting an error message we also report the exact value of
each topology member to make users easily see what's going on.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210929025816.21076-7-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently we directly calculate the omitted cpus based on the given
incomplete collection of parameters. This makes some cmdlines like:
-smp maxcpus=16
-smp sockets=2,maxcpus=16
-smp sockets=2,dies=2,maxcpus=16
-smp sockets=2,cores=4,maxcpus=16
not work. We should probably set the value of cpus to match maxcpus
if it's omitted, which will make above configs start to work.
So the calculation logic of cpus/maxcpus after this patch will be:
When both maxcpus and cpus are omitted, maxcpus will be calculated
from the given parameters and cpus will be set equal to maxcpus.
When only one of maxcpus and cpus is given then the omitted one
will be set to its counterpart's value. Both maxcpus and cpus may
be specified, but maxcpus must be equal to or greater than cpus.
Note: change in this patch won't affect any existing working cmdlines
but allows more incomplete configs to be valid.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-6-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are currently using maxcpus to calculate the omitted sockets
but using cpus to calculate the omitted cores/threads. This makes
cmdlines like:
-smp cpus=8,maxcpus=16
-smp cpus=8,cores=4,maxcpus=16
-smp cpus=8,threads=2,maxcpus=16
work fine but the ones like:
-smp cpus=8,sockets=2,maxcpus=16
-smp cpus=8,sockets=2,cores=4,maxcpus=16
-smp cpus=8,sockets=2,threads=2,maxcpus=16
break the sanity check.
Since we require for a valid config that the product of "sockets * cores
* threads" should equal to the maxcpus, we should uniformly use maxcpus
to calculate their omitted values.
Also the if-branch of "cpus == 0 || sockets == 0" was split into two
branches of "cpus == 0" and "sockets == 0" so that we can clearly read
that we are parsing the configuration with a preference on cpus over
sockets over cores over threads.
Note: change in this patch won't affect any existing working cmdlines
but improves consistency and allows more incomplete configs to be valid.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-5-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To pave the way for the functional improvement in later patches,
make some refactor/cleanup for the smp parsers, including using
local maxcpus instead of ms->smp.max_cpus in the calculation,
defaulting dies to 0 initially like other members, cleanup the
sanity check for dies.
We actually also fix a hidden defect by avoiding directly using
the provided *zero value* in the calculation, which could cause
a segment fault (e.g. using dies=0 in the calculation).
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-4-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the SMP configuration, we should either provide a topology
parameter with a reasonable value (greater than zero) or just
omit it and QEMU will compute the missing value.
The users shouldn't provide a configuration with any parameter
of it specified as zero (e.g. -smp 8,sockets=0) which could
possibly cause unexpected results in the -smp parsing. So we
deprecate this kind of configurations since 6.2 by adding the
explicit sanity check.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210929025816.21076-3-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Here's the next batch of ppc related patches for qemu-6.2. Highlights
are:
* Fixes for several TCG math instructions from the El Dorado Institute
* A number of improvements to the powernv machine type
* Support for a new DEVICE_UNPLUG_GUEST_ERROR QAPI event from Daniel
Barboza
* Support for the new FORM2 PAPR NUMA representation. This allows
more specific NUMA distances, as well as asymmetric configurations
* Fix for 64-bit decrementer (used on MicroWatt CPUs)
* Assorted fixes and cleanups
* A number of updates to MAINTAINERS
Note that the DEVICE_UNPLUG_GUEST_ERROR stuff includes changes to
files outside my normal area, but has suitable Acks.
The MAINTAINERS updates are mostly about marking minor platforms
unmaintained / orphaned, and moving some pieces away from myself and
Greg. As we move onto other projects, we're going to need to drop
more of the ppc maintainership, though we're hoping we can avoid too
abrupt a change.
-----BEGIN PGP SIGNATURE-----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=shYQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.2-20210930' into staging
ppc patch queue for 2021-09-30
Here's the next batch of ppc related patches for qemu-6.2. Highlights
are:
* Fixes for several TCG math instructions from the El Dorado Institute
* A number of improvements to the powernv machine type
* Support for a new DEVICE_UNPLUG_GUEST_ERROR QAPI event from Daniel
Barboza
* Support for the new FORM2 PAPR NUMA representation. This allows
more specific NUMA distances, as well as asymmetric configurations
* Fix for 64-bit decrementer (used on MicroWatt CPUs)
* Assorted fixes and cleanups
* A number of updates to MAINTAINERS
Note that the DEVICE_UNPLUG_GUEST_ERROR stuff includes changes to
files outside my normal area, but has suitable Acks.
The MAINTAINERS updates are mostly about marking minor platforms
unmaintained / orphaned, and moving some pieces away from myself and
Greg. As we move onto other projects, we're going to need to drop
more of the ppc maintainership, though we're hoping we can avoid too
abrupt a change.
# gpg: Signature made Thu 30 Sep 2021 06:42:41 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dg-gitlab/tags/ppc-for-6.2-20210930: (44 commits)
MAINTAINERS: Demote sPAPR from "Supported" to "Maintained"
MAINTAINERS: Add information for OpenPIC
MAINTAINERS: Remove David & Greg as reviewers/co-maintainers of powernv
MAINTAINERS: Orphan obscure ppc platforms
MAINTAINERS: Remove David & Greg as reviewers for a number of boards
MAINTAINERS: Remove machine specific files from ppc TCG CPUs entry
spapr/xive: Fix kvm_xive_source_reset trace event
spapr_numa.c: fixes in spapr_numa_FORM2_write_rtas_tables()
hw/intc: openpic: Clean up the styles
hw/intc: openpic: Drop Raven related codes
hw/intc: openpic: Correct the reset value of IPIDR for FSL chipset
target/ppc: Fix 64-bit decrementer
target/ppc: Convert debug to trace events (decrementer and IRQ)
spapr_numa.c: handle auto NUMA node with no distance info
spapr_numa.c: FORM2 NUMA affinity support
spapr: move FORM1 verifications to post CAS
spapr_numa.c: rename numa_assoc_array to FORM1_assoc_array
spapr_numa.c: parametrize FORM1 macros
spapr_numa.c: scrap 'legacy_numa' concept
spapr_numa.c: split FORM1 code into helpers
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a name field for all the memory listeners. It can be used to identify
which memory listener is which.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210817013553.30584-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Libvirt can use query-sgx-capabilities to get the host
sgx capabilities to decide how to allocate SGX EPC size to VM.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210910102258.46648-3-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The QMP and HMP interfaces can be used by monitor or QMP tools to retrieve
the SGX information from VM side when SGX is enabled on Intel platform.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210910102258.46648-2-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since there is no fill_device_info() callback support, and when we
execute "info memory-devices" command in the monitor, the segfault
will be found.
This patch will add this callback support and "info memory-devices"
will show sgx epc memory exposed to guest. The result as below:
qemu) info memory-devices
Memory device [sgx-epc]: ""
memaddr: 0x180000000
size: 29360128
memdev: /objects/mem1
Memory device [sgx-epc]: ""
memaddr: 0x181c00000
size: 10485760
memdev: /objects/mem2
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-33-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable SGX EPC virtualization, which is currently only support by KVM.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-22-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable SGX EPC virtualization, which is currently only support by KVM.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-21-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The ACPI Device entry for SGX EPC is essentially a hack whose primary
purpose is to provide software with a way to autoprobe SGX support,
e.g. to allow software to implement SGX support as a driver. Details
on the individual EPC sections are not enumerated through ACPI tables,
i.e. software must enumerate the EPC sections via CPUID. Furthermore,
software expects to see only a single EPC Device in the ACPI tables
regardless of the number of EPC sections in the system.
However, several versions of Windows do rely on the ACPI tables to
enumerate the address and size of the EPC. So, regardless of the number
of EPC sections exposed to the guest, create exactly *one* EPC device
with a _CRS entry that spans the entirety of all EPC sections (which are
guaranteed to be contiguous in Qemu).
Note, NUMA support for EPC memory is intentionally not considered as
enumerating EPC NUMA information is not yet defined for bare metal.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-20-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Note that SGX EPC is currently guaranteed to reside in a single
contiguous chunk of memory regardless of the number of EPC sections.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-19-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helpers to detect if SGX EPC exists above 4g, and if so, where SGX
EPC above 4g ends. Use the helpers to adjust the device memory range
if SGX EPC exists above 4g.
For multiple virtual EPC sections, we just put them together physically
contiguous for the simplicity because we don't support EPC NUMA affinity
now. Once the SGX EPC NUMA support in the kernel SGX driver, we will
support this in the future.
Note that SGX EPC is currently hardcoded to reside above 4g.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-18-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Request SGX an SGX Launch Control to be enabled in FEATURE_CONTROL
when the features are exposed to the guest. Our design is the SGX
Launch Control bit will be unconditionally set in FEATURE_CONTROL,
which is unlike host bios.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-17-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expose SGX to the guest if and only if KVM is enabled and supports
virtualization of SGX. While the majority of ENCLS can be emulated to
some degree, because SGX uses a hardware-based root of trust, the
attestation aspects of SGX cannot be emulated in software, i.e.
ultimately emulation will fail as software cannot generate a valid
quote/report. The complexity of partially emulating SGX in Qemu far
outweighs the value added, e.g. an SGX specific simulator for userspace
applications can emulate SGX for development and testing purposes.
Note, access to the PROVISIONKEY is not yet advertised to the guest as
KVM blocks access to the PROVISIONKEY by default and requires userspace
to provide additional credentials (via ioctl()) to expose PROVISIONKEY.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-13-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because SGX EPC is enumerated through CPUID, EPC "devices" need to be
realized prior to realizing the vCPUs themselves, i.e. long before
generic devices are parsed and realized. From a virtualization
perspective, the CPUID aspect also means that EPC sections cannot be
hotplugged without paravirtualizing the guest kernel (hardware does
not support hotplugging as EPC sections must be locked down during
pre-boot to provide EPC's security properties).
So even though EPC sections could be realized through the generic
-devices command, they need to be created much earlier for them to
actually be usable by the guest. Place all EPC sections in a
contiguous block, somewhat arbitrarily starting after RAM above 4g.
Ensuring EPC is in a contiguous region simplifies calculations, e.g.
device memory base, PCI hole, etc..., allows dynamic calculation of the
total EPC size, e.g. exposing EPC to guests does not require -maxmem,
and last but not least allows all of EPC to be enumerated in a single
ACPI entry, which is expected by some kernels, e.g. Windows 7 and 8.
The new compound properties command for sgx like below:
......
-object memory-backend-epc,id=mem1,size=28M,prealloc=on \
-object memory-backend-epc,id=mem2,size=10M \
-M sgx-epc.0.memdev=mem1,sgx-epc.1.memdev=mem2
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210719112136.57018-6-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
