Soon we will introduce new tests related to ACPI PCI hotplug and
acpi-index that will use a new reference blob:
tests/data/acpi/aarch64/virt/DSDT.acpipcihp
tests/data/acpi/aarch64/virt/DSDT.hpoffacpiindex
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-34-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Set up the IO registers used to communicate between QEMU
and ACPI.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-33-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use a local SysBusDevice handle. Also use the newly introduced
sysbus_mmio_map_name which brings better readability about the region
being mapped. GED device has regions which exist depending on some
external properties and it becomes difficult to guess the index of
a region. Better refer to a region by its name.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-32-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some sysbus devices have conditional mmio regions. This
happens for instance with the hw/acpi/ged device. In that case
it becomes difficult to predict which index a specific MMIO
region corresponds to when one needs to mmio map the region.
Introduce a new helper that takes the name of the region instead
of its index. If the region is not found this returns -1.
Otherwise it maps the corresponding index and returns this latter.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-31-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a subsection to migrate the AcpiPciHpState state.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Message-Id: <20250714080639.2525563-30-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU will notify the OS about PCI hotplug/hotunplug events through
GED interrupts. Let the GED device handle a new PCI hotplug event.
On its occurrence it calls the \\_SB.PCI0.PCNT method with the BLCK
mutex held.
The GED device uses a dedicated MMIO region that will be mapped
by the machine code.
At this point the GED still does not support PCI device hotplug in
its TYPE_HOTPLUG_HANDLER implementation. This will come in a
subsequent patch.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-29-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let pass the root bus to ich9 and piix4 through a property link
instead of through an argument passed to acpi_pcihp_init().
Also make sure the root bus is set at the entry of acpi_pcihp_init().
The rationale of that change is to be consistent with the forecoming ARM
implementation where the machine passes the root bus (steming from GPEX)
to the GED device through a link property.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-28-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add PCI device related code in the TYPE_HOTPLUG_HANDLER
implementation.
For a PCI device hotplug/hotunplug event, the code routes to
acpi_pcihp_device callbacks (pre_plug_cb, plug_cb, unplug_request_cb,
unplug_cb).
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-27-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The bus will be needed on ged realize for acpi pci hp setup.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-26-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This property will be set by the machine code on the object
creation. It will be used by acpi pcihp hotplug code.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-25-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Modify the DSDT ACPI table to enable ACPI PCI hotplug.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-24-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hw/arm/virt-acpi-build: Let non hotplug ports support static acpi-index
Add the requested ACPI bits requested to support static acpi-index
for non hotplug ports.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-22-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit adds DSDT blobs to the whilelist in the prospect to
allow changes in the arm virt DSDT method.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-21-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use a specific DSDT.viot reference blob instead of relying on
the default DSDT blob. The content is unchanged.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-20-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-19-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The test misses a variant and this puts the mess on subsequent
rebuild-expected-aml.sh where a first DSDT reference blob is
overriden by another one.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-18-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move aml_pci_edsm to pci-bridge.c since we want to reuse that for
ARM and acpi-index support. Also rename it into build_pci_bridge_edsm.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-17-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pcihp acpi_set_pci_info() generic code currently uses
acpi_get_i386_pci_host() to retrieve the pci host bridge.
To make it work also on ARM we get rid of that call and
directly use AcpiPciHpState::root.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-16-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We intend to reuse build_append_pci_bus_devices and build_append_pcihp_slots
on ARM. So let's move them to hw/acpi/pcihp.c as well as all static
helpers they use.
No functional change intended.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-15-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We plan to reuse build_append_notification_callback() on ARM
so let's move it to pcihp.c.
No functional change intended.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-14-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On ARM we will put the operation regions in AML_SYSTEM_MEMORY.
So let's allow this configuration.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-13-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extract the code that reserves resources for ACPI PCI hotplug
into a new helper named build_append_pcihp_resources() and
move it to pcihp.c. We will reuse it on ARM.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-12-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GPEX acpi_dsdt_add_pci_osc() does basically the same as
build_q35_osc_method().
Rename build_q35_osc_method() into build_pci_host_bridge_osc_method()
and move it into hw/acpi/pci.c. In a subsequent patch we will
use this later in place of acpi_dsdt_add_pci_osc().
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-9-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Retrieve the acpi pcihp property value from the ged. In case this latter
is not set, PCI native hotplug is used on pci0. For expander bridges we
keep pci native hotplug, as done on x86 q35.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-8-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A new boolean property is introduced. This will be used to turn
ACPI PCI hotplug support. By default it is unset.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-7-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
acpi_dsdt_add_pci_osc() name is confusing as it gives the impression
it appends the _OSC method but in fact it also appends the _DSM method
for the host bridge. Let's split the function into two separate ones
and let them return the method Aml pointer instead. This matches the
way it is done on x86 (build_q35_osc_method). In a subsequent patch
we will replace the gpex method by the q35 implementation that will
become shared between ARM and x86.
acpi_dsdt_add_host_bridge_methods is a new top helper that generates
both the _OSC and _DSM methods.
We take the opportunity to move SUPP and CTRL in the _osc method
that use them.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-6-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit adds DSDT blobs to the whilelist in the prospect to
allow changes in the GPEX _OSC method.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250714080639.2525563-5-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a new argument to acpi_dsdt_add_pci_osc to be able to disable
native pci hotplug.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-4-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We plan to reuse build_x86_acpi_pci_hotplug() implementation
for ARM so let's move the code to generic pcihp.
Associated static aml_pci_pdsm() helper is also moved along.
build_x86_acpi_pci_hotplug is renamed into build_acpi_pci_hotplug().
No code change intended.
Also fix the reference to acpi_pci_hotplug.rst documentation
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No need to export aml_pci_device_dsm() as it is only used
in hw/i386/acpi-build.c.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Message-Id: <20250714080639.2525563-2-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that various VirtIO files don't use target specific
API anymore, we can move them to the system_ss[] source
set to build them once.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20250708215320.70426-9-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Restrict "exec/tswap.h" to the tswap*() methods,
move the load/store helpers with the other ones
declared in "qemu/bswap.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20250708215320.70426-8-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Check endianness at runtime to remove the target-specific
TARGET_BIG_ENDIAN definition. Use cpu_to_[be,le]XX() from
"qemu/bswap.h" instead of tswapXX() from "exec/tswap.h".
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250708215320.70426-7-philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250708215320.70426-6-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
target_endian_mode() returns the default endianness (QAPI type)
of a target.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250708215320.70426-5-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20250708215320.70426-4-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To keep "qemu/target-info.h" self-contained to native
types, declare target_arch() -- which returns a QAPI
type -- in "qemu/target-info-qapi.h".
No logical change.
Keeping native types in "qemu/target-info.h" is necessary
to keep building tests such tests/tcg/plugins/mem.c, as
per the comment added in commit ecbcc9ead2 ("tests/tcg:
add a system test to check memory instrumentation"):
/*
* plugins should not include anything from QEMU aside from the
* API header. However as this is a test plugin to exercise the
* internals of QEMU and we want to avoid needless code duplication we
* do so here. bswap.h is pretty self-contained although it needs a
* few things provided by compiler.h.
*/
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20250708215320.70426-3-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20250708215320.70426-2-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250628180226.133285-11-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implements the behavior defined in section 10.2.3.5 of PCIe spec rev 5.
This is needed by devices that support ATS.
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250628180226.133285-10-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We will use this information in vtd_do_iommu_translate to populate the
IOMMUTLBEntry and indicate the correct page mask. This prevents ATS
devices from sending many useless translation requests when a megapage
or gigapage is not present.
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250628180226.133285-9-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250628180226.133285-8-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250628180226.133285-7-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
the PSS field of the extended capabilities stores the supported PASID
size minus 1. This commit adds support for 8bits PASIDs (limited by
MemTxAttrs::pid).
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250628180226.133285-6-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PASID value must be used by devices as a key (or part of a key)
when populating their ATC with the IOTLB entries returned by the IOMMU.
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250628180226.133285-5-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be useful for devices that support ATS
and need to store entries in an ATC (device IOTLB).
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250628180226.133285-4-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be necessary for devices implementing ATS.
We also define a new macro IOMMU_ACCESS_FLAG_FULL in addition to
IOMMU_ACCESS_FLAG to support more access flags.
IOMMU_ACCESS_FLAG is kept for convenience and backward compatibility.
Here are the flags added (defined by the PCIe 5 specification) :
- Execute Requested
- Privileged Mode Requested
- Global
- Untranslated Only
IOMMU_ACCESS_FLAG sets the additional flags to 0
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250628180226.133285-3-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
