1) get alert configuration(Opcode 4201h)
2) set alert configuration(Opcode 4202h)
Signed-off-by: Sweta Kumari <s5.kumari@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250305092501.191929-7-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.2 section 8.2.10.9.5.3 describes media operations commands.
CXL devices supports media operations Sanitize and Write zero command.
Signed-off-by: Vinayak Holikatti <vinayak.kh@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250305092501.191929-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As of 3.1 spec, background commands can be canceled with a new
abort command. Implement the support, which is advertised in
the CEL. No ad-hoc context undoing is necessary as all the
command logic of the running bg command is done upon completion.
Arbitrarily, the on-going background cmd will not be aborted if
already at least 85% done;
A mutex is introduced to stabilize mbox request cancel command vs
the timer callback being fired scenarios (as well as reading the
mbox registers). While some operations under critical regions
may be unnecessary (irq notifying, cmd callbacks), this is not
a path where performance is important, so simplicity is preferred.
Tested-by: Ajay Joshi <ajay.opensrc@micron.com>
Reviewed-by: Ajay Joshi <ajay.opensrc@micron.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250305092501.191929-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since memory region iomem supports memory access size with 1/2/4/8,
it can be used for memory region iomem8 and iomem32_high. Now remove
memory region iomem8 and iomem32_high, merge them into iomem together.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20250507023754.1877445-5-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Rename memory region iomem32_low with iomem, also change ops name
as follows:
loongarch_pch_pic_reg32_low_ops --> loongarch_pch_pic_ops
loongarch_pch_pic_low_readw --> loongarch_pch_pic_read
loongarch_pch_pic_low_writew --> loongarch_pch_pic_write
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20250507023754.1877445-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Register PCH_PIC_INT_ID constains version and supported irq number
information, and it is read only register. The detailed value can
be set at initial stage, rather than read callback.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20250507023148.1877287-5-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
The meaning of macro definition STATUS_LO_START is simliar with
PCH_PIC_INT_STATUS, only that offset is different, the same for
macro POL_LO_START. Now remove these duplicated macro definitions.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20250507023148.1877287-4-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Macro PCH_PIC_HTMSI_VEC_OFFSET and PCH_PIC_ROUTE_ENTRY_OFFSET is renamed
as PCH_PIC_HTMSI_VEC and PCH_PIC_ROUTE_ENTRY separately, it is easier to
understand.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20250507023148.1877287-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
For some registers with width 8 bytes, its name is something like
PCH_PIC_INT_ID_LO and PCH_PIC_INT_ID_HI. From hardware manual,
register name is PCH_PIC_INT_ID instead. Here name PCH_PIC_INT_ID
is used, and PCH_PIC_INT_ID + 4 is used for PCH_PIC_INT_ID_HI.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20250507023148.1877287-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
The s390-ccw-virtio-3.0 machine was the last one that used the
hpage_1m_allowed switch. Since we removed this machine type, we
can now remove the switch and the related code, too. This allows
us to get rid of the get_machine_class() hack and the big fat
warning comment there.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250506062148.306084-8-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fix typo in QEMU's ACPI PCI hotplug API function name that checks
whether a given bus is hotplug-capable.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* Remove test relying on 4.1 machine type that is about to
be disabled
* Fix off-by-1 in deprecation/removal logic for versioned
machine types to cope with dev/rc versions
* Enable logic for disabling registration of versioned machine
types which have exceeded the 6 year lifetime policy.
* Add automated version information to documentation about which
versioned machine types are deprecated and removed
-----BEGIN PGP SIGNATURE-----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=fKhx
-----END PGP SIGNATURE-----
Merge tag 'docs-dep-pull-request' of https://gitlab.com/berrange/qemu into staging
Enable automated removal of deprecated versioned machine types
* Remove test relying on 4.1 machine type that is about to
be disabled
* Fix off-by-1 in deprecation/removal logic for versioned
machine types to cope with dev/rc versions
* Enable logic for disabling registration of versioned machine
types which have exceeded the 6 year lifetime policy.
* Add automated version information to documentation about which
versioned machine types are deprecated and removed
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmgc2GwACgkQvobrtBUQ
# T9+gpA/+K08Np6taoY3XNYPc6CPxEVXJziR/4JT8wzVHKlz5aNjfWW4LewluRpNg
# E+fnUaBWfdwvi2utRG/O+QvVFR5cHATpCBhGzJlAyKymQ7d4jyEjOqgW/euahmrb
# A1KuLMmSNOUG5DiDKXnYpJxnfG/Vq36F4JRXlD+wbTtHImZnwkTGpOcaGcbnNQpn
# CGC0ih1u1JWVlEWNzgR3pgJNoF5qd++aW6p2Nhl9shRRXs+ocIibkPVI733WwJCM
# F11aRuwEAnCxxsS7BU6iSpToTByUQBvWihBJrisg+NvjkTzOG8uu1TBDUCabAU7v
# TfjC6prVZPlt1U7tXZLFrw9bk6ldkA7ZiYp5xqCYXSX1pL1USLzwzfjsCglKTAmn
# FV0Hn4Dk+TpiQ3KGEZsuRJ/PeRpYQTPlJAjUoC7xNmP1kSGo9yrZtMfOFUwf0MFe
# N91N8XyhKiKhxr+CnAoVRiDAvZOts6Se8ELE4mGVXZevP7qd19pMyTQ0V/n6vPHB
# GT84bJIcwoBBLjyM2ySOZsMnYTgRuYs1SdrjUaGrwfUnyBE0Sk1j/gTy02s3PdIM
# Xcbbt2q4uuCfPF/Iu6ExROMooie8P13J0K13+njYDP6DSr+eG1YESN+qsQefNJYG
# Vcf8Nct2LW1KNxt0NV2HkbCnTQu34JT4aw4yyFVTLPDlOFl0++E=
# =fKhx
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 08 May 2025 12:14:36 EDT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* tag 'docs-dep-pull-request' of https://gitlab.com/berrange/qemu:
include/hw/boards: add warning about changing deprecation logic
docs/about/removed-features: auto-generate a note for versioned machine types
docs/about/deprecated: auto-generate a note for versioned machine types
include/hw/boards: cope with dev/rc versions in deprecation checks
Revert "include/hw: temporarily disable deletion of versioned machine types"
tests/qtest/q35-test: Remove the obsolete test_without_smram_base test
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The vfio-user container will later need to hook into these callbacks;
set up vfio to use them, and optionally pass them through to the
container.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Link: https://lore.kernel.org/qemu-devel/20250507152020.1254632-15-john.levon@nutanix.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Instead of requesting region information on demand with
VFIO_DEVICE_GET_REGION_INFO, maintain a cache: this will become
necessary for performance for vfio-user, where this call becomes a
message over the control socket, so is of higher overhead than the
traditional path.
We will also need it to generalize region accesses, as that means we
can't use ->config_offset for configuration space accesses, but must
look up the region offset (if relevant) each time.
Originally-by: John Johnson <john.g.johnson@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250507152020.1254632-12-john.levon@nutanix.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
For vfio-user, device operations such as IRQ handling and region
read/writes are implemented in userspace over the control socket, not
ioctl() to the vfio kernel driver; add an ops vector to generalize this,
and implement vfio_device_io_ops_ioctl for interacting with the kernel
vfio driver.
Originally-by: John Johnson <john.g.johnson@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250507152020.1254632-11-john.levon@nutanix.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add simple helpers to correctly report failures from read/write routines
using the return -errno style.
Signed-off-by: John Levon <john.levon@nutanix.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250507152020.1254632-7-john.levon@nutanix.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add a helper similar to vfio_device_get_region_info() and use it
everywhere.
Replace a couple of needless allocations with stack variables.
As a side-effect, this fixes a minor error reporting issue in the call
from vfio_msix_early_setup().
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Link: https://lore.kernel.org/qemu-devel/20250507152020.1254632-5-john.levon@nutanix.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Allow attachment by explicitly passing a TYPE_VFIO_IOMMU_* string;
vfio-user will use this later.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: John Levon <john.levon@nutanix.com>
Link: https://lore.kernel.org/qemu-devel/20250507152020.1254632-4-john.levon@nutanix.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
If we change the deprecation logic in include/hw/boards.h, we must make
a corresponding change to docs/conf.py and docs/about/deprecated.rst.
Add comments to these files as a warning to future maintainers to keep
these files in sync.
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When VERSION is set to a development snapshot (micro >= 50), or a release
candidate (micro >= 90) we have an off-by-1 in determining deprecation
and deletion thresholds for versioned machine types. In such cases we need
to use the next major/minor version in threshold checks.
This adapts the deprecation macros to do "next version" prediction when
seeing a dev/rc version number.
This ensures users of release candidates get an accurate view of machines
that will be deprecated/deleted in the final release.
This requires hardcoding our current release policy of 3 releases per
year, with a major bump at the start of each year, and that dev/rc
versions have micro >= 50.
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit c9fd2d9a48.
When we introduced the specialized machine type deprecation policy, we
allow automatic deprecation to take effect immediately, but blocked the
automatic deletion of machine types for 2 releases. This ensured we
complied with the historical deprecation policy during the transition
window. Startnig with the 10.1.0 dev cycle, the old machine types would
be candidates for removal under both the old and new deprecation
policies.
Thus we can now enable automatic deletion of old machine types, which
takes effect by skipping the QOM type registration. This prevents the
machine types being listed with '-machine help', and blocks their
creation. The actual code can be purged at a convenient time of the
maintainer's choosing.
In the case of the x86_64 target, this change results in the blocking
of the following machine types:
pc-i440fx-4.0 Standard PC (i440FX + PIIX, 1996) (deprecated)
pc-i440fx-3.1 Standard PC (i440FX + PIIX, 1996) (deprecated)
pc-i440fx-3.0 Standard PC (i440FX + PIIX, 1996) (deprecated)
pc-i440fx-2.9 Standard PC (i440FX + PIIX, 1996) (deprecated)
pc-i440fx-2.8 Standard PC (i440FX + PIIX, 1996) (deprecated)
pc-i440fx-2.7 Standard PC (i440FX + PIIX, 1996) (deprecated)
pc-i440fx-2.6 Standard PC (i440FX + PIIX, 1996) (deprecated)
pc-i440fx-2.5 Standard PC (i440FX + PIIX, 1996) (deprecated)
pc-i440fx-2.4 Standard PC (i440FX + PIIX, 1996) (deprecated)
pc-i440fx-2.12 Standard PC (i440FX + PIIX, 1996) (deprecated)
pc-i440fx-2.11 Standard PC (i440FX + PIIX, 1996) (deprecated)
pc-i440fx-2.10 Standard PC (i440FX + PIIX, 1996) (deprecated)
pc-q35-4.0.1 Standard PC (Q35 + ICH9, 2009) (deprecated)
pc-q35-4.0 Standard PC (Q35 + ICH9, 2009) (deprecated)
pc-q35-3.1 Standard PC (Q35 + ICH9, 2009) (deprecated)
pc-q35-3.0 Standard PC (Q35 + ICH9, 2009) (deprecated)
pc-q35-2.9 Standard PC (Q35 + ICH9, 2009) (deprecated)
pc-q35-2.8 Standard PC (Q35 + ICH9, 2009) (deprecated)
pc-q35-2.7 Standard PC (Q35 + ICH9, 2009) (deprecated)
pc-q35-2.6 Standard PC (Q35 + ICH9, 2009) (deprecated)
pc-q35-2.5 Standard PC (Q35 + ICH9, 2009) (deprecated)
pc-q35-2.4 Standard PC (Q35 + ICH9, 2009) (deprecated)
pc-q35-2.12 Standard PC (Q35 + ICH9, 2009) (deprecated)
pc-q35-2.11 Standard PC (Q35 + ICH9, 2009) (deprecated)
pc-q35-2.10 Standard PC (Q35 + ICH9, 2009) (deprecated)
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
VMSTATE_CPU() is only used in 4 places and doesn't provide
much, directly inline it using VMSTATE_STRUCT().
This removes the last COMPILING_PER_TARGET in "hw/core/cpu.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250429085148.11876-1-philmd@linaro.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCaBljTgAKCRAfewwSUazn
0cSzAPoCbqppm5lUPgFAacD4m1sUI6jLk5pJGMsQTQHkMZ34yQD7BswZhMWPL44Z
LmrZgO7NfqAv96AF1mpRawV9ZXSOGAQ=
=3itp
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20250506' of https://github.com/bibo-mao/qemu into staging
loongarch queue
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCaBljTgAKCRAfewwSUazn
# 0cSzAPoCbqppm5lUPgFAacD4m1sUI6jLk5pJGMsQTQHkMZ34yQD7BswZhMWPL44Z
# LmrZgO7NfqAv96AF1mpRawV9ZXSOGAQ=
# =3itp
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 05 May 2025 21:18:06 EDT
# gpg: using EDDSA key 0D8642A3A2659F80B0B3D1A41F7B0C1251ACE7D1
# gpg: Good signature from "bibo mao <maobibo@loongson.cn>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7044 3A00 19C0 E97A 31C7 13C4 8E86 8FB7 A176 9D4C
# Subkey fingerprint: 0D86 42A3 A265 9F80 B0B3 D1A4 1F7B 0C12 51AC E7D1
* tag 'pull-loongarch-20250506' of https://github.com/bibo-mao/qemu:
hw/loongarch/virt: Allow user to customize OEM ID and OEM table ID
hw/loongarch/virt: Replace RSDT with XSDT table
hw/loongarch/virt: Get physical entry address with elf file
hw/intc/loongarch_pch: Replace legacy reset callback with new api
hw/intc/loongarch_pch: Add reset support
hw/intc/loongarch_extioi: Replace legacy reset callback with new api
hw/intc/loongarch_extioi: Add reset support
hw/intc/loongarch_ipi: Add reset support
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Nuvoton's PSPI is a general purpose SPI module which enables
connections to SPI-based peripheral devices. Attach it to the NPCM8XX.
Tested:
NPCM8XX PSPI driver probed successfully from dmesg log.
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Message-id: 20250414020629.1867106-1-timlee660101@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VirtMachineClass::no_highmem_ecam field was only
used by virt-2.12 machine, which got removed. Remove it
and simplify virt_instance_init().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VirtMachineClass::smbios_old_sys_ver field was
only used by virt-2.11 machine, which got removed.
Remove it and simplify virt_build_smbios().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VirtMachineClass::claim_edge_triggered_timers field
was only used by virt-2.8 machine, which got removed.
Remove it and simplify fdt_add_timer_nodes() and build_gtdt().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VirtMachineClass::no_its field was only used by
virt-2.7 machine, which got removed. Remove it and
simplify virt_instance_init() and virt_acpi_build().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VirtMachineClass::disallow_affinity_adjustment
field was only used by virt-2.6 machine, which got
removed. Remove it and simplify virt_cpu_mp_affinity().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[PMM: Remove now-unused variable]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VirtMachineClass::no_pmu field was only used by
virt-2.6 machine, which got removed. Remove it and
simplify machvirt_init().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace legacy reset callback register device_class_set_legacy_reset()
with new function resettable_class_set_parent_phases(). With new API,
it will call reset callback of parent object.
The internal state has been cleared in parent object
LOONGARCH_PIC_COMMON, here parent_phases.hold() is directly called.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add reset support with LoongArch pci irqchip, and register reset
callback support with new API resettable_class_set_parent_phases().
Clear internal HW registers and SW state when virt machine resets.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Replace legacy reset callback register device_class_set_legacy_reset()
with new function resettable_class_set_parent_phases(). With new API,
it will call reset callback of parent object and then itself.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add reset support with extioi irqchip, and register reset callback
support with new API resettable_class_set_parent_phases(). Clear
internal HW registers and SW state when virt machine resets.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add reset support with ipi object, register reset callback and clear
internal registers when virt machine resets.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
AST2700 TSP(Tertiary Service Processor) is a Cortex-M4 coprocessor
The patch adds support for TSP with following update:
- Introduce Aspeed27x0TSPSoCState structure in aspeed_soc.h
- Implement initialization and realization functions
- Add support for UART, INTC, and SCU devices
- Map unimplemented devices for IPC and SCUIO
- Defined memory map and IRQ maps for AST27x0 A1 TSP SoC
The IRQ mapping is similar to AST2700 CA35 SoC, featuring a two-level
interrupt controller.
Difference from AST2700:
- AST2700
- Support GICINT128 to GICINT136 in INTC
- The INTCIO GIC_192_201 has 10 output pins, mapped as follows:
Bit 0 -> GIC 192
Bit 1 -> GIC 193
Bit 2 -> GIC 194
Bit 3 -> GIC 195
Bit 4 -> GIC 196
- AST2700-tsp
- Support TSPINT128 to TSPINT136 in INTC
- The INTCIO TSPINT_160_169 has 10 output pins, mapped as follows:
Bit 0 -> TSPINT 160
Bit 1 -> TSPINT 161
Bit 2 -> TSPINT 162
Bit 3 -> TSPINT 163
Bit 4 -> TSPINT 164
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: I69eec2b68b26ef04187b2922c5f2e584b9076c66
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-7-steven_lee@aspeedtech.com
[ clg: removed local 'Error* err' in aspeed_soc_ast27x0tsp_realize() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The AST2700 SSP (Secondary Service Processor) is a Cortex-M4 coprocessor.
This patch adds support for A1 SSP with the following updates:
- Introduce Aspeed27x0SSPSoCState structure in aspeed_soc.h
- Define memory map and IRQ map for AST27x0 A1 SSP SoC
- Implement initialization and realization functions
- Add support for UART, INTC, and SCU devices
- Map unimplemented devices for IPC and SCUIO
The IRQ mapping is similar to AST2700 CA35 SoC, featuring a two-level
interrupt controller.
Difference from AST2700:
- AST2700
- Support GICINT128 to GICINT136 in INTC
- The INTCIO GIC_192_201 has 10 output pins, mapped as follows:
Bit 0 -> GIC 192
Bit 1 -> GIC 193
Bit 2 -> GIC 194
Bit 3 -> GIC 195
Bit 4 -> GIC 196
- AST2700-ssp
- Support SSPINT128 to SSPINT136 in INTC
- The INTCIO SSPINT_160_169 has 10 output pins, mapped as follows:
Bit 0 -> SSPINT 160
Bit 1 -> SSPINT 161
Bit 2 -> SSPINT 162
Bit 3 -> SSPINT 163
Bit 4 -> SSPINT 164
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: I924bf1a657f1e83f9e16d6673713f4a06ecdb496
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-6-steven_lee@aspeedtech.com
[ clg: removed local 'Error* err' in aspeed_soc_ast27x0ssp_realize() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
- Define new types for ast2700tsp INTC and INTCIO
- Add register definitions for TSP INTC and INTCIO
- Implement write handlers for TSP INTC and INTCIO
- Register new types in aspeed_intc_register_types
The design of the TSP INTC and INTCIO controllers is similar to
AST2700, with the following differences:
- AST2700
Support GICINT128 to GICINT136 in INTC
The INTCIO GIC_192_201 has 10 output pins, mapped as follows:
Bit 0 -> GIC 192
Bit 1 -> GIC 193
Bit 2 -> GIC 194
Bit 3 -> GIC 195
Bit 4 -> GIC 196
- AST2700-tsp
Support TSPINT128 to TSPINT136 in INTC
The INTCIO TSPINT_160_169 has 10 output pins, mapped as follows:
Bit 0 -> TSPINT 160
Bit 1 -> TSPINT 161
Bit 2 -> TSPINT 162
Bit 3 -> TSPINT 163
Bit 4 -> TSPINT 164
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: I3f3aca4b90129640369cf4a92deb4b9a12df5b70
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-5-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
- Define new types for ast2700ssp INTC and INTCIO
- Add register definitions for SSP INTC and INTCIO
- Implement write handlers for SSP INTC and INTCIO
- Register new types in aspeed_intc_register_types
The design of the SSP INTC and INTCIO controllers is similar to
AST2700, with the following differences:
- AST2700
Support GICINT128 to GICINT136 in INTC
The INTCIO GIC_192_201 has 10 output pins, mapped as follows:
Bit 0 -> GIC 192
Bit 1 -> GIC 193
Bit 2 -> GIC 194
Bit 3 -> GIC 195
Bit 4 -> GIC 196
- AST2700-ssp
Support SSPINT128 to SSPINT136 in INTC
The INTCIO SSPINT_160_169 has 10 output pins, mapped as follows:
Bit 0 -> SSPINT 160
Bit 1 -> SSPINT 161
Bit 2 -> SSPINT 162
Bit 3 -> SSPINT 163
Bit 4 -> SSPINT 164
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: Ib8cb0e264505cef48e17f173e057f3b2d1ea35c4
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-4-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maps following unimplemented devices in SoC memory
- dpmcu
- iomem
- iomem0
- iomem1
- ltpi
Iomem, Iomem0 and Iomem1 include unimplemented controllers in the memory ranges 0x0 - 0x1000000, 0x120000000 - 0x121000000 and
0x14000000 - 0x141000000.
For instance:
- USB hub at 0x12010000
- eSPI at 0x14C5000
- PWM at 0x140C0000
DPMCU stands for Display Port MCU controller. LTPI is used to connect to AST1700.
AST1700 is an I/O expander that supports the DC-SCM 2.1 LTPI protocol.
It provides AST2700 with additional GPIO, UART, I3C, and other interfaces.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: Iae4db49a4818af3e2c43c16a27fc76329d2405d6
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-2-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Introduce "aspeed_load_vbootrom()" to support loading a virtual boot ROM image
into the vbootrom memory region, using the "-bios" command-line option.
Introduce a new "vbootrom" field in the AspeedMachineClass to indicate whether
a machine supports the virtual boot ROM region.
Set this field to true by default for the AST2700-A0 and AST2700-A1 EVB
machines.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Nabih Estefan <nabihestefan@google.com>
Tested-by: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250424075135.3715128-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Introduce a new vbootrom memory region. The region is mapped at address
"0x00000000" and has a size of 128KB, identical to the SRAM region size.
This memory region is intended for loading a vbootrom image file as part of the
boot process.
The vbootrom registered in the SoC's address space using the ASPEED_DEV_VBOOTROM
index.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Nabih Estefan <nabihestefan@google.com>
Tested-by: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250424075135.3715128-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
AST27x0 has 4 EHCI controllers, where each CPU and I/O die has 2
instances. This patch use existing TYPE_PLATFORM_EHCI. After wiring up
the EHCI controller, the ast2700a1-evb can find up to 4 USB EHCI
interfaces.
ehci-platform 12061000.usb: EHCI Host Controller
ehci-platform 12061000.usb: new USB bus registered, assigned bus number 2
ehci-platform 12063000.usb: EHCI Host Controller
ehci-platform 12063000.usb: new USB bus registered, assigned bus number 3
ehci-platform 12061000.usb: irq 88, io mem 0x12061000
ehci-platform 12063000.usb: irq 90, io mem 0x12063000
ehci-platform 14121000.usb: EHCI Host Controller
ehci-platform 14123000.usb: EHCI Host Controller
ehci-platform 12061000.usb: USB 2.0 started, EHCI 1.00
ehci-platform 14121000.usb: new USB bus registered, assigned bus number 5
ehci-platform 14123000.usb: new USB bus registered, assigned bus number 6
ehci-platform 14121000.usb: irq 91, io mem 0x14121000
ehci-platform 14123000.usb: irq 92, io mem 0x14123000
ehci-platform 12063000.usb: USB 2.0 started, EHCI 1.00
usb usb2: Manufacturer: Linux 6.6.78-dirty-bafd2830c17c-gbafd2830c17c-dirty ehci_hcd
usb usb3: Manufacturer: Linux 6.6.78-dirty-bafd2830c17c-gbafd2830c17c-dirty ehci_hcd
ehci-platform 14121000.usb: USB 2.0 started, EHCI 1.00
usb usb5: Manufacturer: Linux 6.6.78-dirty-bafd2830c17c-gbafd2830c17c-dirty ehci_hcd
ehci-platform 14123000.usb: USB 2.0 started, EHCI 1.00
usb usb6: Manufacturer: Linux 6.6.78-dirty-bafd2830c17c-gbafd2830c17c-dirty ehci_hcd
Note that, AST27x0A0 only has 2 EHCI controllers due to hw issue.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250317065938.1902272-2-troy_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
- Replace cpu_list() definition by CPUClass::list_cpus() callback
- Remove few MO_TE definitions on Hexagon / X86 targets
- Remove target_ulong uses in ARMMMUFaultInfo and ARM CPUWatchpoint
- Remove DEVICE_HOST_ENDIAN definition
- Evaluate TARGET_BIG_ENDIAN at compile time and use target_needs_bswap() more
- Rename target_words_bigendian() as target_big_endian()
- Convert target_name() and target_cpu_type() to TargetInfo API
- Constify QOM TypeInfo class_data/interfaces fields
- Get default_cpu_type calling machine_class_default_cpu_type()
- Correct various uses of GLibCompareDataFunc prototype
- Simplify ARM/Aarch64 gdb_get_core_xml_file() handling a bit
- Move device tree files in their own pc-bios/dtb/ subdir
- Correctly check strchrnul() symbol availability on macOS SDK
- Move target-agnostic methods out of cpu-target.c and accel-target.c
- Unmap canceled USB XHCI packet
- Use deposit/extract API in designware model
- Fix MIPS16e translation
- Few missing header fixes
-----BEGIN PGP SIGNATURE-----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=DXnZ
-----END PGP SIGNATURE-----
Merge tag 'single-binary-20250425' of https://github.com/philmd/qemu into staging
Various patches loosely related to single binary work:
- Replace cpu_list() definition by CPUClass::list_cpus() callback
- Remove few MO_TE definitions on Hexagon / X86 targets
- Remove target_ulong uses in ARMMMUFaultInfo and ARM CPUWatchpoint
- Remove DEVICE_HOST_ENDIAN definition
- Evaluate TARGET_BIG_ENDIAN at compile time and use target_needs_bswap() more
- Rename target_words_bigendian() as target_big_endian()
- Convert target_name() and target_cpu_type() to TargetInfo API
- Constify QOM TypeInfo class_data/interfaces fields
- Get default_cpu_type calling machine_class_default_cpu_type()
- Correct various uses of GLibCompareDataFunc prototype
- Simplify ARM/Aarch64 gdb_get_core_xml_file() handling a bit
- Move device tree files in their own pc-bios/dtb/ subdir
- Correctly check strchrnul() symbol availability on macOS SDK
- Move target-agnostic methods out of cpu-target.c and accel-target.c
- Unmap canceled USB XHCI packet
- Use deposit/extract API in designware model
- Fix MIPS16e translation
- Few missing header fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmgLqb8ACgkQ4+MsLN6t
# wN6nCQ//cmv1M+NsndhO5TAK8T1eUSXKlTZh932uro6ZgxKwN4p+j1Qo7bq3O9gu
# qUMHNbcfQl8sHSytiXBoxCjLMCXC3u38iyz75WGXuPay06rs4wqmahqxL4tyno3l
# 1RviFts9xlLn+tJqqrAR6+pRdALld0TY+yXUjXgr4aK5pIRpLz9U/sIEoh7qbA5U
# x0MTaceDG3A91OYo0TgrNbcMe1b9GqQZ+a4tbaP+oE37wbiKdyQ68LjrEbV08Y1O
# qrFF4oxquV31QJcUiuII1W7hC6psGrMsUA1f1qDu7QvmybAZWNZNsR9T66X9jH5J
# wXMShJmmXwxugohmuPPFnDshzJy90aFL6Jy2shrfqcG2v0W66ARY1ZnbJLCcfczt
# 073bnE2dnOVhd/ny37RrIJNJLLmYM0yFDeKuYtNNAzpK9fpA7Q2PI8QiqNacQ3Pa
# TdEYrGlMk7OeNck8xJmJMY5rATthi1D4dIBv3rjQbUolQvPJe2Y9or0R2WL1jK5v
# hhr6DY01iSPES3CravmUs/aB1HRMPi/nX45OmFR6frAB7xqWMreh81heBVuoTTK8
# PuXtRQgRMRKwDeTxlc6p+zba4mIEYG8rqJtPFRgViNCJ1KsgSIowup3BNU05YuFn
# NoPoRayMDVMgejVgJin3Mg2DCYvt/+MBmO4IoggWlFsXj59uUgA=
# =DXnZ
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 25 Apr 2025 11:26:55 EDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'single-binary-20250425' of https://github.com/philmd/qemu: (58 commits)
qemu: Convert target_name() to TargetInfo API
accel: Move target-agnostic code from accel-target.c -> accel-common.c
accel: Make AccelCPUClass structure target-agnostic
accel: Include missing 'qemu/accel.h' header in accel-internal.h
accel: Implement accel_init_ops_interfaces() for both system/user mode
cpus: Move target-agnostic methods out of cpu-target.c
cpus: Replace CPU_RESOLVING_TYPE -> target_cpu_type()
qemu: Introduce target_cpu_type()
qapi: Rename TargetInfo structure as QemuTargetInfo
hw/microblaze: Evaluate TARGET_BIG_ENDIAN at compile time
hw/mips: Evaluate TARGET_BIG_ENDIAN at compile time
target/xtensa: Evaluate TARGET_BIG_ENDIAN at compile time
target/mips: Check CPU endianness at runtime using env_is_bigendian()
accel/kvm: Use target_needs_bswap()
linux-user/elfload: Use target_needs_bswap()
target/hexagon: Include missing 'accel/tcg/getpc.h'
accel/tcg: Correct list of included headers in tcg-stub.c
system/kvm: make functions accessible from common code
meson: Use osdep_prefix for strchrnul()
meson: Share common C source prefixes
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Have target_name() be a target-agnostic method, dispatching
to a per-target TargetInfo singleton structure.
By default a stub singleton is used. No logical change
expected.
Inspired-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424222112.36194-3-philmd@linaro.org>
Currently the CPUClass:gdb_core_xml_file setting is a simple 'const
char *' which the CPU class must set to a fixed string. Allow the
CPU class to instead set a new method gdb_get_core_xml_file() which
returns this string.
This will allow Arm CPUs to use different XML files for AArch32 vs
AArch64 without having to have an extra AArch64-specific class type
purely to give somewhere to set cc->gdb_core_xml_file differently.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250317142819.900029-3-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The documentation for the CPUClass::gdb_arch_name method claims that
the returned string should be freed with g_free(). This is not
correct: in commit a650683871 we changed this method to
instead return a simple constant string, but forgot to update
the documentation.
Make the documentation match the new semantics.
Fixes: a650683871 ("hw/core/cpu: Return static value with gdb_arch_name()")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250317142819.900029-2-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250424194905.82506-6-philmd@linaro.org>
Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-4-philmd@linaro.org>
Some targets define cpu_list to a method listing their
CPUs on stdout. In order to make list_cpus() generic,
introduce the CPUClass::list_cpus() callback.
When no callback is registered, list_cpus() defaults
to the cpu_list definition.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20250324185837.46506-2-philmd@linaro.org>
Because we handle host IOMMU device creation in each container backend,
we know which type name to use, so hiod_typename property is useless
now, just remove it.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250423072824.3647952-6-zhenzhong.duan@intel.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
realize() is now moved after attachment, do the same for hiod creation.
Introduce a new function vfio_device_hiod_create_and_realize() to do
them all in one go.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250423072824.3647952-5-zhenzhong.duan@intel.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
"hw/vfio/vfio-common.h" has been emptied of most of its declarations
by the previous changes and the only declarations left are related to
VFIODevice. Rename it to "hw/vfio/vfio-device.h" and make the
necessary adjustments.
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/qemu-devel/20250326075122.1299361-36-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
File "common.c" has been emptied of most of its definitions by the
previous changes and the only definitions left are related to the VFIO
MemoryListener handlers. Rename it to "listener.c" and introduce its
associated "vfio-listener.h" header file for the declarations.
Cleanup a little the includes while at it.
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: John Levon <john.levon@nutanix.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/qemu-devel/20250326075122.1299361-33-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Rename to vfio_container_query_dirty_bitmap() to be consistent with
the VFIO container routine naming scheme.
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: John Levon <john.levon@nutanix.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/qemu-devel/20250326075122.1299361-32-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Use the prefix 'vfio_container_devices_' to reflect the routine simply
loops over the container's device list.
Reviewed-by: John Levon <john.levon@nutanix.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/qemu-devel/20250326075122.1299361-31-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Also rename vfio_devices_all_device_dirty_tracking_started() while at
it and use the prefix 'vfio_container_devices_' for routines simply
looping over the container's device list.
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: John Levon <john.levon@nutanix.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/qemu-devel/20250326075122.1299361-30-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
vfio_container_query_dirty_bitmap() is only used in "container-base.c".
Also, rename to vfio_container_iommu_query_dirty_bitmap() to reflect it
is using the VFIO IOMMU backend device ->query_dirty_bitmap() handler.
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: John Levon <john.levon@nutanix.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/qemu-devel/20250326075122.1299361-29-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
vfio_devices_query_dirty_bitmap() is only used in "container-base.c".
Also, rename to vfio_container_devices_query_dirty_bitmap() to reflect
with the prefix 'vfio_container_devices_' that it simply loops over
the container's device list.
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: John Levon <john.levon@nutanix.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/qemu-devel/20250326075122.1299361-28-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Routines of common.c :
vfio_devices_all_dirty_tracking_started
vfio_devices_all_device_dirty_tracking
vfio_devices_query_dirty_bitmap
vfio_get_dirty_bitmap
are all related to dirty page tracking directly at the container level
or at the container device level. Naming is a bit confusing. We will
propose new names in the following changes.
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/qemu-devel/20250326075122.1299361-27-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Gather all CPR related declarations into "vfio-cpr.h" to reduce exposure
of VFIO internals in "hw/vfio/vfio-common.h". These were introduced in
commit d9fa4223b3 ("vfio: register container for cpr").
Order file list in meson.build while at it.
Cc: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Steve Sistare <steven.sistare@oracle.com>
Link: https://lore.kernel.org/qemu-devel/20250326075122.1299361-22-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
VFIOAddressSpace is a common object used by VFIOContainerBase which is
declared in "hw/vfio/vfio-container-base.h". Move the VFIOAddressSpace
related services into "container-base.c".
While at it, rename :
vfio_get_address_space -> vfio_address_space_get
vfio_put_address_space -> vfio_address_space_put
to better reflect the namespace these routines belong to.
Reviewed-by: John Levon <john.levon@nutanix.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/qemu-devel/20250326075122.1299361-15-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Gather all VFIORegion related declarations and definitions into their
own files to reduce exposure of VFIO internals in "hw/vfio/vfio-common.h".
They were introduced for 'vfio-platform' support in commits
db0da029a1 ("vfio: Generalize region support") and a664477db8
("hw/vfio/pci: Introduce VFIORegion").
To be noted that the 'vfio-platform' devices have been deprecated and
will be removed in QEMU 10.2. Until then, make the declarations
available externally for 'sysbus-fdt.c'.
Cc: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/qemu-devel/20250326075122.1299361-12-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Gather all VFIOIOMMUFD related declarations introduced by commits
5ee3dc7af7 ("vfio/iommufd: Implement the iommufd backend") and
5b1e96e654 ("vfio/iommufd: Introduce auto domain creation") into
"vfio-iommufd.h". This to reduce exposure of VFIO internals in
"hw/vfio/vfio-common.h".
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: John Levon <john.levon@nutanix.com>
Link: https://lore.kernel.org/qemu-devel/20250318095415.670319-10-clg@redhat.com
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/qemu-devel/20250326075122.1299361-11-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
These routines are migration related. Move their declaration and
implementation under the migration files.
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Reviewed-by: John Levon <john.levon@nutanix.com>
Link: https://lore.kernel.org/qemu-devel/20250326075122.1299361-8-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The migration core subsystem makes use of the VFIO migration API to
collect statistics on the number of bytes transferred. These services
are declared in "hw/vfio/vfio-common.h" which also contains VFIO
internal declarations. Move the migration declarations into a new
header file "hw/vfio/vfio-migration.h" to reduce the exposure of VFIO
internals.
While at it, use a 'vfio_migration_' prefix for these services.
To be noted, vfio_migration_add_bytes_transferred() is a VFIO
migration internal service which we will be moved in the subsequent
patches.
Cc: Kirti Wankhede <kwankhede@nvidia.com>
Cc: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Prasad Pandit <pjp@fedoraproject.org>
Reviewed-by: John Levon <john.levon@nutanix.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/qemu-devel/20250326075122.1299361-4-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
qemu_tcg_mttcg_enabled() is specific to 1/ TCG and
2/ system emulation. Move the prototype declaration
to "system/tcg.h", reducing 'mttcg_enabled' variable
scope.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250403220420.78937-17-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All targets have been converted to TCGCPUOps::mmu_index(),
remove the now unused CPUClass::mmu_index().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250401080938.32278-24-philmd@linaro.org>
Since commits 32a8ea12fab..90b7022e698 (target: "Split out
TARGET_env_mmu_index"), target's memory_rw_debug() callbacks
use the target's TARGET_env_mmu_index(), not the generic
CPUClass::mmu_index() callback. Update the documentation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250401080938.32278-2-philmd@linaro.org>
Poison CONFIG_USER_ONLY and CONFIG_SOFTMMU unless
the compilation unit is in specific_ss, libuser_ss,
or libsystem_ss. This is intended to prevent files
being incorrectly added to common_ss.
Remove #ifndef CONFIG_USER_ONLY / #error / #endif blocks.
All they do is trigger the poison error.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We were hiding a number of declarations from user-only,
although it hurts nothing to allow them.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We were hiding a number of declarations from user-only,
although it hurts nothing to allow them. The inlines
for user-only are unused.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We were hiding a number of declarations from user-only,
although it hurts nothing to allow them.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Relatively few objects in qemu care about watchpoints, so split
out to a new header. Removes an instance of CONFIG_USER_ONLY
from hw/core/cpu.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert the existing includes with sed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert the existing includes with sed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert the existing includes with
sed -i ,exec/memory.h,system/memory.h,g
Move the include within cpu-all.h into a !CONFIG_USER_ONLY block.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Prepare the dump-skeys QMP command for the universal binary project
* Add compat machine types for 10.1
* Convert the remaining Avocado tests to the functional framework
* Some more small fixes for the functional tests
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmgIghARHHRodXRoQHJl
ZGhhdC5jb20ACgkQLtnXdP5wLbXFeA//ayM/KF9so5DbatHQ+TD4wReNd5zlcYxz
hjx5FAQPl+QmMNcBhkfBWJ6DqypzzrDOrRevwKe1xcJYyUthDJ6Bl//phmfTKzbo
lAW5XmQhFGi+yolhRMdd6N+5Ky/c0jPzZjuJvi21RmSWi+ZqBiwUmaH1wutiI6A5
peytvpt1R+DPJsZtFViEW9AwRtSkQh4I5+not33bvKdFWTGHE+iSYnVTXDiEbY5p
TNIXaN9t9ZnojknswwHvyF+QbXn/pVLSA+XLDZuops2IEiPCsCTXUdjSwlfPReKM
G0tl5DOXJFUMwmU1wRtqn0TdkP2AL1KfMr6ZVsE1zD1/XMj9uDF6BxxjB2si2UrC
DTXCn+K535IyEa3qf25mhv9ueDr2ItiaDk4CBpb+Z/lg3p73jVW8G1mAU0mG9XlH
KhJgOqTelnSuwlF6PdhtOxiH/rmgozMcrlppAMBbNgKBvzrT7Iwcq3OS9r+ZAWXO
7ouY/zYlbe1fnRgkgaapWx5AXhbkyxqgMkmZk0JE5XcsOHwMUd4O/Sk2kE6zVObe
7ReNqJdxj4c+lfqof5UwMUeqb465NTEAJXBGpiGDcP5qCzGBwnaIv5D71o1A+KoB
8g3E6woUN2i3ZPq8W4L8PbMR+zHNGUIVdnmH3EtNd6X3cBN9w4UYVN1MdzKSzQsi
aCG/VdfcZsw=
=yO4v
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2025-04-23' of https://gitlab.com/thuth/qemu into staging
* Remove the obsolete s390-ccw-virtio-2.9 machine type
* Prepare the dump-skeys QMP command for the universal binary project
* Add compat machine types for 10.1
* Convert the remaining Avocado tests to the functional framework
* Some more small fixes for the functional tests
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmgIghARHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXFeA//ayM/KF9so5DbatHQ+TD4wReNd5zlcYxz
# hjx5FAQPl+QmMNcBhkfBWJ6DqypzzrDOrRevwKe1xcJYyUthDJ6Bl//phmfTKzbo
# lAW5XmQhFGi+yolhRMdd6N+5Ky/c0jPzZjuJvi21RmSWi+ZqBiwUmaH1wutiI6A5
# peytvpt1R+DPJsZtFViEW9AwRtSkQh4I5+not33bvKdFWTGHE+iSYnVTXDiEbY5p
# TNIXaN9t9ZnojknswwHvyF+QbXn/pVLSA+XLDZuops2IEiPCsCTXUdjSwlfPReKM
# G0tl5DOXJFUMwmU1wRtqn0TdkP2AL1KfMr6ZVsE1zD1/XMj9uDF6BxxjB2si2UrC
# DTXCn+K535IyEa3qf25mhv9ueDr2ItiaDk4CBpb+Z/lg3p73jVW8G1mAU0mG9XlH
# KhJgOqTelnSuwlF6PdhtOxiH/rmgozMcrlppAMBbNgKBvzrT7Iwcq3OS9r+ZAWXO
# 7ouY/zYlbe1fnRgkgaapWx5AXhbkyxqgMkmZk0JE5XcsOHwMUd4O/Sk2kE6zVObe
# 7ReNqJdxj4c+lfqof5UwMUeqb465NTEAJXBGpiGDcP5qCzGBwnaIv5D71o1A+KoB
# 8g3E6woUN2i3ZPq8W4L8PbMR+zHNGUIVdnmH3EtNd6X3cBN9w4UYVN1MdzKSzQsi
# aCG/VdfcZsw=
# =yO4v
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 23 Apr 2025 02:00:48 EDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2025-04-23' of https://gitlab.com/thuth/qemu: (29 commits)
MAINTAINERS: Add functional tests that are not covered yet
tests/functional: Remove unnecessary import statements
tests/functional: Remove semicolons at the end of lines
Remove the remainders of the Avocado tests
docs/devel/testing: Dissolve the ci-definitions.rst.inc file
gitlab-ci: Update QEMU_JOB_AVOCADO and QEMU_CI_AVOCADO_TESTING
tests/functional: Convert the SMMU test to the functional framework
tests/functional: Use the tuxrun kernel for the aarch64 replay test
tests/functional: Use the tuxrun kernel for the x86 replay test
tests/avocado: Remove the boot_linux.py tests
tests/functional: Convert the 64-bit big endian Wheezy mips test
tests/functional: Convert the 64-bit little endian Wheezy mips test
tests/functional: Convert the 32-bit little endian Wheezy mips test
tests/functional: Convert the 32-bit big endian Wheezy mips test
tests/avocado: Remove the LinuxKernelTest class
tests/functional: Convert the i386 replay avocado test
tests/functional: Convert reverse_debugging tests to the functional framework
tests/functional: Move the check for the parameters from avocado to functional
gitlab-ci: Remove the avocado tests from the CI pipelines
tests/functional/test_vnc: skip test if no crypto backend available
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add 10.1 machine types for arm/i440fx/m68k/q35/s390x/spapr.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250414094543.221241-1-cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In preparation to make @dump-skeys command generic,
extract s390_qmp_dump_skeys() out of qmp_dump_skeys().
Register it as CCW qmp_dump_skeys() callback.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-ID: <20250310151414.11550-4-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The storage keys are part of the machine memory.
Introduce the TYPE_DUMP_SKEYS_INTERFACE type,
allowing machine using storage keys to dump them
when a DumpSKeysInterface::qmp_dump_skeys() callback
is provided.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250310151414.11550-3-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that the machine types that set the migration_enabled flag to
false are gone, we can remove it and the related code.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250115073819.15452-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that the machine types that set the migration_enabled flag to
false are gone, we can remove it and the related code.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250115073819.15452-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that the s390-ccw-virtio-2.9 machine type has been removed, we
don't need the "css_migration_enabled" variable anymore and can remove
the related code.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250115073819.15452-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Linux issues this command when booting a powernv machine.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250401140153.685523-4-npiggin@gmail.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
This requires some adjustments to callers to avoid possible behaviour
changes for PCI devices.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250401140153.685523-3-npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[Rename pci_ipmi_bt_get_fwinfo to pci_ipmi_kcs_get_fwinfo in the
pci_ipmi_kcs.c file.]
Signed-off-by: Corey Minyard <corey@minyard.net>
Match the prototype of cpu_memory_rw_debug().
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250325224403.4011975-4-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The SoC has three SPI controllers, not four.
Remove the extra define of an SPI IRQ.
Fixes: 06908a84f0 "hw/arm/fsl-imx8mp: Add SPI controllers"
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20250318205709.28862-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Deriving from TYPE_SYS_BUS_DEVICE fixes the SoC object to be reset upon machine
reset. It also makes the SoC implementation not user-creatable which can trigger
the following crash:
$ ./qemu-system-aarch64 -M virt -device fsl-imx8mp
**
ERROR:../../devel/qemu/tcg/tcg.c:1006:tcg_register_thread: assertion failed:
(n < tcg_max_ctxs)
Bail out! ERROR:../../devel/qemu/tcg/tcg.c:1006:tcg_register_thread:
assertion failed: (n < tcg_max_ctxs)
Aborted (core dumped)
Fixes: a4eefc69b2 "hw/arm: Add i.MX 8M Plus EVK board"
Reported-by: Thomas Huth <thuth@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20250318205709.28862-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Commit 6de4aa8dc5 ("hw/arm/aspeed_ast27x0: Add SoC Support for AST2700
A1") extends ast2700a1 spis_num to 3, but ASPEED_SPIS_NUM defines the
maximum number of spi controller to 2, result in ehci[0] is being
overwritten in runtime.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Fixes: 6de4aa8dc5 ("hw/arm/aspeed_ast27x0: Add SoC Support for AST2700 A1")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250317065938.1902272-1-troy_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
* pl011: pad C PL011State struct to same size as Rust struct
* rust: hpet: fix type of "timers" property
* rust: hpet: fix functional tests (and really everything that uses it)
* rust: Kconfig: Factor out whether devices are Rust or C
* rust: vmstate: Fixes and tests
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfdsUsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOGpwf/Qk4bAcLX7A1/nOmYT+DtWzZ9V/VS
hSOe6BruzW8rzwMyn/d7oR+aUpk3sL+v2iPBWqoZ/wh0w8kcABcUfWsqqGI8ln/K
pnTdiC+hra5z0AFH1tmjjtOI50WDOeSjh5SFvoPJtGzhEbo89QvsUWgy98HiHOMm
YFPDuhg3Pfd1XDcdoaa85sOHO1vDsj45fCEJhx6Ktib4vOlEm2I4Z9YR/JxNMT33
vy/y09HG4cpc6bWKLPL3nqR9RchUSI+YRDZ8rlaXUowiZzH2K/wi0qJOsvG6oJF5
awni0YWuwyFi16jmUub8NFnWk6NKjbACqw74AwoVPbNbDoCrrogXzIF2Lw==
=NzCN
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* exec/cpu-all: remove BSWAP_NEEDED
* pl011: pad C PL011State struct to same size as Rust struct
* rust: hpet: fix type of "timers" property
* rust: hpet: fix functional tests (and really everything that uses it)
* rust: Kconfig: Factor out whether devices are Rust or C
* rust: vmstate: Fixes and tests
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfdsUsUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOGpwf/Qk4bAcLX7A1/nOmYT+DtWzZ9V/VS
# hSOe6BruzW8rzwMyn/d7oR+aUpk3sL+v2iPBWqoZ/wh0w8kcABcUfWsqqGI8ln/K
# pnTdiC+hra5z0AFH1tmjjtOI50WDOeSjh5SFvoPJtGzhEbo89QvsUWgy98HiHOMm
# YFPDuhg3Pfd1XDcdoaa85sOHO1vDsj45fCEJhx6Ktib4vOlEm2I4Z9YR/JxNMT33
# vy/y09HG4cpc6bWKLPL3nqR9RchUSI+YRDZ8rlaXUowiZzH2K/wi0qJOsvG6oJF5
# awni0YWuwyFi16jmUub8NFnWk6NKjbACqw74AwoVPbNbDoCrrogXzIF2Lw==
# =NzCN
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 21 Mar 2025 14:34:51 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (24 commits)
rust: hpet: fix decoding of timer registers
rust/vmstate: Include complete crate path of VMStateFlags in vmstate_clock
rust/vmstate: Add unit test for vmstate_validate
rust/vmstate: Add unit test for pointer case
rust/vmstate: Add unit test for vmstate_{of|struct} macro
rust/vmstate: Add unit test for vmstate_of macro
rust/vmstate: Support vmstate_validate
rust/vmstate: Re-implement VMState trait for timer binding
rust/vmstate: Relax array check when build varray in vmstate_struct
rust/vmstate: Fix unnecessary VMState bound of with_varray_flag()
rust/vmstate: Fix "cannot infer type" error in vmstate_struct
rust/vmstate: Fix type check for varray in vmstate_struct
rust/vmstate: Fix size field of VMStateField with VMS_ARRAY_OF_POINTER flag
rust/vmstate: Fix num field when varray flags are set
rust/vmstate: Fix num_offset in vmstate macros
rust/vmstate: Remove unnecessary unsafe
exec/cpu-all: remove BSWAP_NEEDED
load_aout: replace bswap_needed with big_endian
rust: pl011: Check size of state struct at compile time
hw/char/pl011: Pad PL011State struct to same size as Rust impl
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Targets know whether they are big-endian more than they know if
the endianness is different from the host: the former is mostly
a constant, at least in machine creation code, while the latter
has to be computed with TARGET_BIG_ENDIAN != HOST_BIG_ENDIAN or
something like that.
load_aout, however, takes a "bswap_needed" argument. Replace
it with a "big_endian" argument; even though all users are
big-endian, it is cheap enough to keep the optional swapping
functionality even for little-endian boards.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have some users of the PL011 struct which embed it directly into
their own state structs. This means that the Rust version of the
device must have a state struct that is the same size or smaller
than the C struct.
In commit 9b642097d6 ("rust: pl011: switch to safe chardev operation")
the Rust PL011 state struct changed from having a bindings::CharBackend
to a chardev::CharBackend, which made it grow larger than the C
version. This results in an assertion at startup when QEMU was
built with Rust enabled:
$ qemu-system-arm -M raspi2b -display none
ERROR:../../qom/object.c:562:object_initialize_with_type: assertion
failed: (size >= type->instance_size)
The long-term better approach to this problem would be to move
our C device code patterns away from "embed a struct" and (back)
to "have a pointer to the device", so we can make the C PL011State
struct a private implementation detail rather than exposed to
its users.
For the short term, add a padding field at the end of the C struct
so it's big enough that the Rust state struct can fit.
Fixes: 9b642097d6 ("rust: pl011: switch to safe chardev operation")
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Link: https://lore.kernel.org/r/20250321112523.1774131-3-peter.maydell@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than use the hardcoded define throughout the tree for the
PNOR LPC address, keep it within the PnvPnor object.
This should solve a dead code issue in the BMC HIOMAP checks where
Coverity (correctly) reported that the sanity checks are dead code.
We would like to keep the sanity checks without turning them into a
compile time assert in case we would like to make them configurable
in future.
Fixes: 4c84a0a4a6 ("ppc/pnv: Add a PNOR address and size sanity checks")
Resolves: Coverity CID 1593723
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Previously the ctrl virtqueue was handled in the AioContext where SCSI
requests are processed. When IOThread Virtqueue Mapping was added things
become more complicated because SCSI requests could run in other
AioContexts.
Simplify by handling the ctrl virtqueue in the main loop where reset
operations can be performed. Note that BHs are still used canceling SCSI
requests in their AioContexts but at least the mean loop activity
doesn't need BHs anymore.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20250311132616.1049687-13-stefanha@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow virtio-scsi virtqueues to be assigned to different IOThreads. This
makes it possible to take advantage of host multi-queue block layer
scalability by assigning virtqueues that have affinity with vCPUs to
different IOThreads that have affinity with host CPUs. The same feature
was introduced for virtio-blk in the past:
https://developers.redhat.com/articles/2024/09/05/scaling-virtio-blk-disk-io-iothread-virtqueue-mapping
Here are fio randread 4k iodepth=64 results from a 4 vCPU guest with an
Intel P4800X SSD:
iothreads IOPS
------------------------------
1 189576
2 312698
4 346744
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20250311132616.1049687-12-stefanha@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
[kwolf: Updated 051 output, virtio-scsi can now use any iothread]
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The code that builds an array of AioContext pointers indexed by the
virtqueue is not specific to virtio-blk. virtio-scsi will need to do the
same thing, so extract the functions.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20250311132616.1049687-11-stefanha@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block layer can invoke the resize callback from any AioContext that
is processing requests. The virtqueue is already protected but the
events_dropped field also needs to be protected against races. Cover it
using the event virtqueue lock because it is closely associated with
accesses to the virtqueue.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20250311132616.1049687-7-stefanha@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Virtqueues are not thread-safe. Until now this was not a major issue
since all virtqueue processing happened in the same thread. The ctrl
queue's Task Management Function (TMF) requests sometimes need the main
loop, so a BH was used to schedule the virtqueue completion back in the
thread that has virtqueue access.
When IOThread Virtqueue Mapping is introduced in later commits, event
and ctrl virtqueue accesses from other threads will become necessary.
Introduce an optional per-virtqueue lock so the event and ctrl
virtqueues can be protected in the commits that follow.
The addition of the ctrl virtqueue lock makes
virtio_scsi_complete_req_from_main_loop() and its BH unnecessary.
Instead, take the ctrl virtqueue lock from the main loop thread.
The cmd virtqueue does not have a lock because the entirety of SCSI
command processing happens in one thread. Only one thread accesses the
cmd virtqueue and a lock is unnecessary.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20250311132616.1049687-6-stefanha@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
SCSIDevice keeps track of in-flight requests for device reset and Task
Management Functions (TMFs). The request list requires protection so
that multi-threaded SCSI emulation can be implemented in commits that
follow.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20250311132616.1049687-5-stefanha@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Until now, a SCSIDevice's I/O requests have run in a single AioContext.
In order to support multiple IOThreads it will be necessary to move to
the concept of a per-SCSIRequest AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20250311132616.1049687-4-stefanha@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All instances of TYPE_IMX_USDHC set vendor=SDHCI_VENDOR_IMX.
No need to special-case it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20250308213640.13138-3-philmd@linaro.org>
Allows SYNDBG definitions to be available for common compilation units.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250307215623.524987-5-pierrick.bouvier@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
acpi_builtin() can be used to check at runtime whether
the ACPI subsystem is built in a qemu-system binary.
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250307223949.54040-3-philmd@linaro.org>
There is no TARGET_ARM_64 definition. Luckily enough,
when TARGET_AARCH64 is defined, TARGET_ARM also is.
Fixes: 733766cd37 ("hw/arm: introduce xenpvh machine")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250305153929.43687-2-philmd@linaro.org>
The interrupt enable registers are not reset to 0 on Freescale eSDHC
but some bits are enabled on reset. At least some U-Boot versions seem
to expect this and not initialise these registers before expecting
interrupts. Use existing vendor property for Freescale eSDHC and set
the reset value of the interrupt registers to match Freescale
documentation.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <20250210160329.DDA7F4E600E@zero.eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The hypervisor is expected to create a value for the HASHPKEY SPR for
each partition. Currently it uses zero for all partitions, use a
random number instead, which in theory might make kernel ROP protection
more secure.
Signed-of-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241219034035.1826173-4-npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add support for reporting Hostwide state counters for nested KVM pseries
guests running with 'cap-nested-papr' on Qemu-TCG acting as
L0-hypervisor. The Hostwide state counters are statistics about state that
L0-hypervisor maintains for the L2-guests and represent the state of all
L2-guests, not just a specific one.
These stats counters are exposed to L1-Hypervisor by the L0-Hypervisor via a
new bit-flag named 'getHostWideState' for the H_GUEST_GET_STATE hcall which
is documented at [1]. Once this flag is set the hcall should populate the
Guest-State-Elements in the requested GSB with the stat counter
values. Currently following five counters are supported:
* l0_guest_heap_size_inuse
* l0_guest_heap_size_max
* l0_guest_pagetable_size_inuse
* l0_guest_pagetable_size_max
* l0_guest_pagetable_reclaimed
At the moment '0' is being reported for all these counters as these
counters doesn't align with how L0-Qemu manages Guest memory.
The patch implements support for these counters by adding new members to
the 'struct SpaprMachineStateNested'. These new members are then plugged
into the existing 'guest_state_element_types[]' with the help of a new
macro 'GSBE_NESTED_MACHINE_DW' together with a new helper
'get_machine_ptr()'. guest_state_request_check() is updated to ensure
correctness of the requested GSB and finally h_guest_getset_state() is
updated to handle the newly introduced flag
'GUEST_STATE_REQUEST_HOST_WIDE'.
This patch is tested with the proposed linux-kernel implementation to
expose these stat-counter as perf-events at [2].
[1]
https://lore.kernel.org/all/20241222140247.174998-2-vaibhav@linux.ibm.com
[2]
https://lore.kernel.org/all/20241222140247.174998-1-vaibhav@linux.ibm.com
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250221155449.530645-1-vaibhav@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
As per the PAPR, bit 0 of byte 64 in pa-features property
indicates availability of 2nd DAWR registers. i.e. If this bit is set, 2nd
DAWR is present, otherwise not. Use KVM_CAP_PPC_DAWR1 capability to find
whether kvm supports 2nd DAWR or not. If it's supported, allow user to set
the pa-feature bit in guest DT using cap-dawr1 machine capability.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-ID: <173708681866.1678.11128625982438367069.stgit@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
There is a possibility that SPI controller can get into loop due to indefinite
RDR match failures. Hence put a limit to failures and stop the sequencer.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Message-ID: <20250303141328.23991-5-chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Create a spi buses with distinct names on each socket so that responders
are attached to correct SPI controllers.
Change the bus name to chipX.spi.<busnum> where X = 0..<num_sockets>
QOM tree on a 2 socket machine:
(qemu) info qom-tree
/machine (powernv10-machine)
/chip[0] (power10_v2.0-pnv-chip)
/pib_spic[0] (pnv-spi)
/chip0.spi.0 (SSI)
/xscom-spi[0] (memory-region)
/chip[1] (power10_v2.0-pnv-chip)
/pib_spic[0] (pnv-spi)
/chip1.spi.0 (SSI)
/xscom-spi[0] (memory-region)
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Message-ID: <20250303141328.23991-4-chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In PnvXferBuffer dynamically allocating and freeing is a
process overhead. Hence used an existing Fifo8 buffer with
capacity of 16 bytes.
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Message-ID: <20250303141328.23991-2-chalapathi.v@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
When processing a backlog scan for group interrupts, also take
into account crowd interrupts.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
XIVE crowd sizes are encoded into a 2-bit field as follows:
0: 0b00
2: 0b01
4: 0b10
16: 0b11
A crowd size of 8 is not supported.
If an END is defined with the 'crowd' bit set, then a target can be
running on different blocks. It means that some bits from the block
VP are masked when looking for a match. It is similar to groups, but
on the block instead of the VP index.
Most of the changes are due to passing the extra argument 'crowd' all
the way to the function checking for matches.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add support for the NVPG and NVC BARs. Access to the BAR pages will
cause backlog counter operations to either increment or decriment
the counter.
Also added qtests for the same.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
When the hypervisor or OS pushes a new value to the CPPR, if the LSMFB
value is lower than the new CPPR value, there could be a pending group
interrupt in the backlog, so it needs to be scanned.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
When a group interrupt cannot be delivered, we need to:
- increment the backlog counter for the group in the NVG table
(if the END is configured to keep a backlog).
- start a broadcast operation to set the LSMFB field on matching CPUs
which can't take the interrupt now because they're running at too
high a priority.
[npiggin: squash in fixes from milesg]
[milesg: only load the NVP if the END is !ignore]
[milesg: always broadcast backlog, not only when there are precluded VPs]
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
If an END has the 'i' bit set (ignore), then it targets a group of
VPs. The size of the group depends on the VP index of the target
(first 0 found when looking at the least significant bits of the
index) so a mask is applied on the VP index of a running thread to
know if we have a match.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The NSR has a (so far unused) grouping level field. When a interrupt
is presented, that field tells the hypervisor or OS if the interrupt
is for an individual VP or for a VP-group/crowd. This patch reworks
the presentation API to allow to set/unset the level when
raising/accepting an interrupt.
It also renames xive_tctx_ipb_update() to xive_tctx_pipr_update() as
the IPB is only used for VP-specific target, whereas the PIPR always
needs to be updated.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Rename to follow the convention of the other function names.
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
If the 'H' attribute is set on the NVP structure, the hardware
automatically saves and restores some attributes from the TIMA in the
NVP structure.
The group-specific attributes LSMFB, LGS and T have an extra flag to
individually control what is saved/restored.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
skiboot has a bug that does not handle ISA FW access correctly for IDSEL
devices > 0, and the current PNOR default address and size puts 64MB in
device 0 and 64MB in device 1, which causes skiboot to hit this bug and
breaks PNOR accesses.
Move the PNOR address down to 0 for now, so a 256MB PNOR can be accessed
via device 0.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The OCC is an On Chip Controller that handles various thermal and power
management. It is a PPC405 microcontroller that runs its own firmware
which is out of scope of the powernv machine model. Some dynamic
behaviour and interfaces that are important for host CPU testing can be
implemented with a much simpler state machine.
This change adds a 100ms timer that ticks through a simple state machine
that looks for "OCC command requests" coming from host firmware, and
responds to them.
For now the powercap command is implemented because that is used by
OPAL and exported to Linux and is easy to test.
$ F=/sys/firmware/opal/powercap/system-powercap/powercap-current
$ cat $F
100
$ echo 50 | sudo tee $F
50
$ cat $F
50
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The HOMER is a region of memory used by host and firmware and
microconrollers. It has very little logic by itself, just some BAR
registers. Users of this memory should operate on it rather than
have HOMER implement them with MMIO registers, which is not the
right model.
This change switches the implementation of HOMER from MMIO to RAM,
and moves the OCC register implementation to in-memory structure
accesses performed by the OCC model.
This has the downside that access to unimplemented regions of HOMER
are no longer flagged. Perhaps that could be done by adding a memory
region for HOMER, and ram subregions under that for each implemented
part. But for now this takes the simpler approach.
Note: This brings some data structure definitions from skiboot, which
does not match QEMU coding style but is not changed to make comparisons
and updates simpler.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Put HOMER memory region base and size into the class, to allow more
code-reuse between different machines in later changes.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Each non-core chiplet on a chip has a "pervasive chiplet" unit and its
xscom register set. This adds support for PHB4/5.
skiboot reads the CPLT_CONF1 register in __phb4/5_get_max_link_width(),
which shows up as unimplemented xscom reads. Set a value in PCI CONF1
register's link-width field to demonstrate skiboot doing something
interesting with it.
In the bigger picture, it might be better to model the pervasive
chiplet type as parent that each non-core chiplet model derives from.
For now this is enough to get the PHB registers implemented and working
for skiboot, and provides a second example (after the N1 chiplet) that
will help if the design is reworked as such.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In PVH dom0, when passthrough a device to domU, QEMU code
xen_pt_realize->xc_physdev_map_pirq wants to use gsi, but in current codes
the gsi number is got from file /sys/bus/pci/devices/<sbdf>/irq, that is
wrong, because irq is not equal with gsi, they are in different spaces, so
pirq mapping fails.
To solve above problem, use new interface of Xen, xc_pcidev_get_gsi to get
gsi and use xc_physdev_map_pirq_gsi to map pirq when dom0 is PVH.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Acked-by: Anthony PERARD <anthony@xenproject.org>
Reviewed-by: Stewart Hildebrand <stewart.hildebrand@amd.com>
Message-Id: <20241106061418.3655304-1-Jiqian.Chen@amd.com>
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
All handlers have been converted to SysemuCPUOps::has_work().
Remove CPUClass::has_work along with cpu_common_has_work() and
simplify cpu_has_work(), making SysemuCPUOps::has_work handler
mandatory.
Note, since cpu-common.c is in meson's common_ss[] source set, we
must define cpu_exec_class_post_init() in cpu-target.c (which is
in the specific_ss[] source set) to have CONFIG_USER_ONLY defined.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250125170125.32855-25-philmd@linaro.org>
SysemuCPUOps::has_work() is similar to CPUClass::has_work(),
but only exposed on system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-4-philmd@linaro.org>
In order to expand cpu_has_work(), un-inline it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-3-philmd@linaro.org>
This method is not used on user emulation, because there
is always work to do there.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-2-philmd@linaro.org>
CpuState caches its CPUClass since commit 6fbdff8706
("cpu: cache CPUClass in CPUState for hot code paths"),
use it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250122093028.52416-5-philmd@linaro.org>
Simplify cpu-target.c by extracting mixed vmstate code
into the cpu_vmstate_register() / cpu_vmstate_unregister()
helpers, implemented in cpu-user.c and cpu-system.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-20-philmd@linaro.org>
Updated Aspeed27x0SoCState to include an intc[2] array instead of a single
AspeedINTCState instance. Modified aspeed_soc_ast2700_get_irq and
aspeed_soc_ast2700_get_irq_index to correctly reference the corresponding
interrupt controller instance and OR gate index.
Currently, only GIC 192 to 201 are supported, and their source interrupts are
from INTCIO and connected to INTC at input pin 0 and output pins 0 to 9 for
GIC 192-201.
To support both AST2700 A1 and A0, INTC input pins 1 to 9 and output pins
10 to 18 remain to support GIC 128-136, which source interrupts from INTC.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-21-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Added new definitions for AST2700_A1_SILICON_REV and AST2750_A1_SILICON_REV to
identify the A1 silicon revisions.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-19-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This update introduces support for handling multi-output IRQs in the AST2700
interrupt controller (INTC), specifically for GICINT192_201. GICINT192_201 maps
1:10 to input IRQ 0 and output IRQs 0 to 9. Each status bit corresponds to a
specific IRQ.
Implemented "aspeed_intc_set_irq_handler_multi_outpins" to handle IRQs with
multiple output pins. Introduced "aspeed_intc_status_handler_multi_outpins"
for managing status registers associated with multi-output IRQs.
Added new IRQ definitions for GICINT192_201 in INTC.
Adjusted the IRQ array to accommodate 10 input pins and 19 output pins,
aligning with the new GICINT192_201 mappings.
|------------------------------|
| INTC |
|inpin[0:0]--------->outpin[0] |
|inpin[0:1]--------->outpin[1] |
|inpin[0:2]--------->outpin[2] |
|inpin[0:3]--------->outpin[3] |
orgates[0]-------> |inpin[0:4]--------->outpin[4] |
|inpin[0:5]--------->outpin[5] |
|inpin[0:6]--------->outpin[6] |
|inpin[0:7]--------->outpin[7] |
|inpin[0:8]--------->outpin[8] |
|inpin[0:9]--------->outpin[9] |
| |
orgates[1]------> |inpin[1]----------->outpin[10]|
orgates[2]------> |inpin[2]----------->outpin[11]|
orgates[3]------> |inpin[3]----------->outpin[12]|
orgates[4]------> |inpin[4]----------->outpin[13]|
orgates[5]------> |inpin[5]----------->outpin[14]|
orgates[6]------> |inpin[6]----------->outpin[15]|
orgates[7]------> |inpin[7]----------->outpin[16]|
orgates[8]------> |inpin[8]----------->outpin[17]|
orgates[9]------> |inpin[9]----------->outpin[18]|
|------------------------------|
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-17-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The INTC controller supports GICINT128 to GICINT136, mapping 1:1 to input and
output IRQs 0 to 8. Previously, the formula "address & 0x0f00" was used to
derive the IRQ index numbers.
However, the INTC controller also supports GICINT192_201, mapping 1 input IRQ
pin to 10 output IRQ pins. The pin numbers for input and output are different.
It is difficult to use a formula to determine the index number of INTC model
supported input and output IRQs.
To simplify and improve readability, introduces the AspeedINTCIRQ structure to
save the input/output IRQ index and its enable/status register address.
Introduce the "aspeed_2700_intc_irqs" table to store IRQ information for INTC.
Introduce the "aspeed_intc_get_irq" function to retrieve the input/output IRQ
pin index from the provided status/enable register address.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-15-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Added support for multiple output pins in the INTC controller to
accommodate the AST2700 A1.
Introduced "num_outpins" to represent the number of output pins. Updated the
IRQ handling logic to initialize and connect output pins separately from input
pins. Modified the "aspeed_soc_ast2700_realize" function to connect source
orgates to INTC and INTC to GIC128 - GIC136. Updated the "aspeed_intc_realize"
function to initialize output pins.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-13-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
To support AST2700 A1, some registers of the INTC(CPU Die) support one input
pin to multiple output pins. Renamed "num_ints" to "num_inpins" in the INTC
controller code for better clarity and consistency in naming conventions.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-12-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The previous implementation set the "aspeed_intc_ops" struct, containing read
and write callbacks, to be used when I/O is performed on the INTC region.
Both "aspeed_intc_read" and "aspeed_intc_write" callback functions were used
for INTC (CPU Die).
To support the INTCIO (IO Die) model, introduces a new "reg_ops" class
attribute. This allows setting different memory region operations to support
different INTC models.
Will introduce "aspeed_intcio_read" and "aspeed_intcio_write" callback
functions are used for INTCIO.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-11-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently, the size of the "regs" array is 0x2000, which is too large. So far,
it only uses "GICINT128 to `GICINT134", and the offsets from 0 to 0x1000 are
unused. To save code size and avoid mapping large unused gaps, update to only
map the useful set of registers:
INTC register [0x1000 – 0x1804]
Update "reg_size" to 0x808. Introduce a new class attribute "reg_offset" to set
the start offset of a "INTC" sub-region. Set the "reg_offset" to 0x1000 for INTC
registers.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-6-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently, the size of the regs array is 0x2000, which is too large. So far,
it only use GICINT128 - GICINT134, and the offsets from 0 to 0x1000 are unused.
To save code size, introduce a new class attribute "reg_size" to set the
different register sizes for the INTC models in AST2700 and add a regs
sub-region in the memory container.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-5-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently, the size of the "regs" array is 0x2000, which is too large. To save
code size and avoid mapping large unused gaps, will update it to only map the
useful set of registers. This update will support multiple sub-regions with
different sizes.
To address the redundant size issue, replace the static "regs" array with a
dynamically allocated "regs" memory.
Introduce a new "aspeed_intc_unrealize" function to free the allocated "regs"
memory.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
According to the AST2700 datasheet, the INTC(CPU DIE) controller has 16KB
(0x4000) of register space, and the INTCIO (I/O DIE) controller has 1KB (0x400)
of register space.
Introduced a new class attribute "mem_size" to set different memory sizes for
the INTC models in AST2700.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently, it does not support the CRYPT command. Instead, it only sends an
interrupt to notify the firmware that the crypt command has completed.
It is a temporary workaround to resolve the boot issue in the Crypto Manager
Self Test.
Introduce a new "use_crypt_workaround" class attribute and set it to true in
the AST2700 HACE model to enable this workaround by default for AST2700.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250225075622.305515-5-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The SoC type name is stored under AspeedSoCClass which is
redundant. Use object_get_typename() instead where needed.
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/qemu-devel/20250218073534.585066-1-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
* Improve performance of s390x PCI passthrough devices with relaxed translation
-----BEGIN PGP SIGNATURE-----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=CyiZ
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2025-03-07' of https://gitlab.com/thuth/qemu into staging
* Bug fixes and some small improvements for functional tests
* Improve performance of s390x PCI passthrough devices with relaxed translation
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmfK3dsRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbUfDQ/8CopnzCKGKFhyM5skrHbhDbUVbul6yV4L
# kIOo7N8OlrNcQB90bj+Udy+mUANHjkmSiBa5lJ/78ej4DFS6CxeVgrl1fSEl36xn
# GjWDwSUiN8pG1O4YtnDqWVTBieGSzbkQr1jHgpeAnvv08s+TtmudP1T8IznWU2v9
# FqD78SdebZ0Kua+ksBgMxwkHd6VMw13vsu6KuT9VBhie40LcDrFOuG8RDz/qo4IO
# Yg9s1Bqcy7Wa4+0ldMXS1plSdIqJBtVc/HDTg1QwH994b4Lvr7ffrFZmuVcd2dbE
# XKQ5jAMOYZqWdlXszkyd8moYGhmevCkQlALhpnbHixnfakfFYX0wTiJB6oCthFQ0
# It0J/ntNsCmJiIHNbPLzsJ1pE5+ureRnGbxVe05n+zfm8MaXL6s4nSdZzHyp8n43
# UZQqVzK55Q34K9O0qoUdCdBCjMKS9v5u95jjJo8+nc8sJoeQTssOoiixwB/E4y21
# 9qSh7CbDjQK4zwuzQ7jKD603zAJH6ivvsHXlMBMXJFBiSMCAoQQ1vyou6yRHswRr
# gLHDwiWUx8SX8ckbbJ/+Zo9+T8JBMvC5hNYG8VoAtlTQusG4bHSbKdPNNH0eHsEp
# f7RlZPRizkcK3w0Nj+u4kXdnnex3QLLSgnyAYq7zEl6V+mho8KqaBezkO7wQDHZy
# +GW5ignQ1Gs=
# =CyiZ
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 07 Mar 2025 19:51:55 HKT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2025-03-07' of https://gitlab.com/thuth/qemu:
s390x/pci: indicate QEMU supports relaxed translation for passthrough
s390x/pci: add support for guests that request direct mapping
MAINTAINERS: Add docs/devel/testing/functional.rst to the functional section
doc: add missing 'Asset' type in function test doc
tests/functional/test_virtio_balloon: Only use KVM for running this test
tests/functional: fix race in virtio balloon test
tests/functional: Increase the timeout of the mips64el_replay test
tests/functional/test_mips_malta: Add a network test via the pcnet NIC
tests/functional: Move the code for testing HTTP downloads to a common function
tests/functional: stop output from zstd command when uncompressing
tests/functional: drop unused 'get_tag' method
tests/functional: skip memaddr tests on 32-bit builds
tests/functional: reduce tuxrun maxmem to work on 32-bit hosts
tests/functional: set 'qemu_bin' as an object level field
tests/functional: remove unused 'bin_prefix' variable
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use a similar terminology smmu_hash_remove_by_sid_range() as the one
being used for other hash table matching functions since
smmuv3_invalidate_ste() name is not self explanatory, and introduce a
helper that invokes the g_hash_table_foreach_remove.
No functional change intended.
Signed-off-by: JianChunfu <jansef.jian@hj-micro.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20250228031438.3916-1-jansef.jian@hj-micro.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When FEAT_SEL2 was implemented the SEL2 timers were missed. This
shows up when building the latest Hafnium with SPMC_AT_EL=2. The
actual implementation utilises the same logic as the rest of the
timers so all we need to do is:
- define the timers and their access functions
- conditionally add the correct system registers
- create a new accessfn as the rules are subtly different to the
existing secure timer
Fixes: e9152ee91c (target/arm: add ARMv8.4-SEL2 system registers)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250204125009.2281315-7-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org
Cc: Andrei Homescu <ahomescu@google.com>
Cc: Arve Hjønnevåg <arve@google.com>
Cc: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
[PMM: CP_ACCESS_TRAP_UNCATEGORIZED -> CP_ACCESS_UNDEFINED;
offset logic now in gt_{indirect,direct}_access_timer_offset() ]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SMMUTransCfg->ttb is never used in QEMU, TT base address
can be accessed by SMMUTransCfg->tt[i]->ttb.
Signed-off-by: JianChunfu <jansef.jian@hj-micro.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20250221031034.69822-1-jansef.jian@hj-micro.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Specifying this bit in the guest CLP response indicates that the guest
can optionally choose to skip translation and instead use
identity-mapped operations.
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20250226210013.238349-3-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When receiving a guest mpcifc(4) or mpcifc(6) instruction without the T
bit set, treat this as a request to perform direct mapping instead of
address translation. In order to facilitate this, pin the entirety of
guest memory into the host iommu.
Pinning for the direct mapping case is handled via vfio and its memory
listener. Additionally, ram discard settings are inherited from vfio:
coordinated discards (e.g. virtio-mem) are allowed while uncoordinated
discards (e.g. virtio-balloon) are disabled.
Subsequent guest DMA operations are all expected to be of the format
guest_phys+sdma, allowing them to be used as lookup into the host
iommu table.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20250226210013.238349-2-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- Merge "qemu/clang-tsa.h" within "qemu/compiler.h"
- Various cleanups around accelerators initialization code
(better user/system split)
- Various trivial cleanups in accel/tcg/,
Guard few TCG calls with tcg_enabled()
- Explicit disassemble_info endianness
- Improve dual-endianness support for MicroBlaze
-----BEGIN PGP SIGNATURE-----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=3TRh
-----END PGP SIGNATURE-----
Merge tag 'accel-cpus-20250306' of https://github.com/philmd/qemu into staging
Generic CPUs / accelerators patch queue
- Merge "qemu/clang-tsa.h" within "qemu/compiler.h"
- Various cleanups around accelerators initialization code
(better user/system split)
- Various trivial cleanups in accel/tcg/,
Guard few TCG calls with tcg_enabled()
- Explicit disassemble_info endianness
- Improve dual-endianness support for MicroBlaze
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmfJw08ACgkQ4+MsLN6t
# wN70whAAtfcdWtqseFfb6fvDtjflgxN51Ui0iaOECXUA18USKriGy34eBcMYMiM2
# +eKgU7+jI6JGE4+burcgWUsPpFFF951/A8+lyIbFgO5yToTDmC+qNe4XfmMAIyXq
# uf9Obr2c0Xk9luh4odb+jPAQodw/7G1fKgcCVIJNDCl/xEcPhS9eNpTaHwcVnkWI
# K6KrxWXOsqG6+evJBPWYoXtOOyt0+JcwAsJoGhprwtGm3P9+jSVXsgeGsJVyZcna
# f32JtjWL754O8XeMkOn4x6rt58VrCIMKI9xT7keDyuhTCq0Zki9RO2nMU2dSw5mN
# AfL9hxqUy0Nijnyslg3ugujDfTePsNyLdwwH7n0mnoD72ELi6WnhDsmOThuEB3Rd
# 4/kdwTJfA/rlWk/GF1tbKW7AvQZokRARtzmL3V0HmGJu57lX+2JuszEdYBkqDEP7
# GH1I10B2yANUm+C9y3X8qWOU7Ws433ebJeJoZuyfnbZ9Me+UfRmql/oS+V8ata2i
# fArEItpldUFrWRyYLkTbXrh2dgyV9yJTEir/lzOzeAZZzyabTbjf2z9qnh976GGO
# 1QnDy5QA4f54kDBUZe7JK26TZsHPch7cgqXW6f8tRlJF7A9hxGK8d2TUV/lC3/vx
# LUOlWNu03PhiruYmZEcWOsY3Jt9jRCF6lIryrnaJsqnVOVmMUMM=
# =3TRh
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 06 Mar 2025 23:46:23 HKT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'accel-cpus-20250306' of https://github.com/philmd/qemu: (54 commits)
include: Poison TARGET_PHYS_ADDR_SPACE_BITS definition
system: Open-code qemu_init_arch_modules() using target_name()
target/i386: Mark WHPX APIC region as little-endian
target/alpha: Do not mix exception flags and FPCR bits
target/riscv: Convert misa_mxl_max using GLib macros
target/riscv: Declare RISCVCPUClass::misa_mxl_max as RISCVMXL
target/xtensa: Finalize config in xtensa_register_core()
target/sparc: Constify SPARCCPUClass::cpu_def
target/i386: Constify X86CPUModel uses
disas: Remove target_words_bigendian() call in initialize_debug_target()
target/xtensa: Set disassemble_info::endian value in disas_set_info()
target/sh4: Set disassemble_info::endian value in disas_set_info()
target/riscv: Set disassemble_info::endian value in disas_set_info()
target/ppc: Set disassemble_info::endian value in disas_set_info()
target/mips: Set disassemble_info::endian value in disas_set_info()
target/microblaze: Set disassemble_info::endian value in disas_set_info
target/arm: Set disassemble_info::endian value in disas_set_info()
target: Set disassemble_info::endian value for big-endian targets
target: Set disassemble_info::endian value for little-endian targets
target/mips: Fix possible MSA int overflow
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121142341.17001-5-philmd@linaro.org>
AccelCPUClass is for accelerator to initialize target specific
features of a vCPU. Not really related to hardware emulation,
rename "hw/core/accel-cpu.h" as "accel/accel-cpu-target.h"
(using the explicit -target suffix).
More importantly, target specific header often access the
target specific definitions which are in each target/FOO/cpu.h
header, usually included generically as "cpu.h" relative to
target/FOO/. However, there is already a "cpu.h" in hw/core/
which takes precedence. This change allows "accel-cpu-target.h"
to include a target "cpu.h".
Mechanical change doing:
$ git mv include/hw/core/accel-cpu.h \
include/accel/accel-cpu-target.h
$ sed -i -e 's,hw/core/accel-cpu.h,accel/accel-cpu-target.h,' \
$(git grep -l hw/core/accel-cpu.h)
and renaming header guard 'ACCEL_CPU_TARGET_H'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-12-philmd@linaro.org>
TCGCPUOps structure makes more sense in the accelerator context
rather than hardware emulation. Move it under the accel/tcg/ scope.
Mechanical change doing:
$ sed -i -e 's,hw/core/tcg-cpu-ops.h,accel/tcg/cpu-ops.h,g' \
$(git grep -l hw/core/tcg-cpu-ops.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-11-philmd@linaro.org>
Both CPUClass::gdb_read_register() and CPUClass::gdb_write_register()
handlers are called from common gdbstub code, and won't be called with
register index over CPUClass::gdb_num_core_regs:
int gdb_read_register(CPUState *cpu, GByteArray *buf, int reg)
{
CPUClass *cc = CPU_GET_CLASS(cpu);
if (reg < cc->gdb_num_core_regs) {
return cc->gdb_read_register(cpu, buf, reg);
}
...
}
static int gdb_write_register(CPUState *cpu, uint8_t *mem_buf, int reg)
{
CPUClass *cc = CPU_GET_CLASS(cpu);
if (reg < cc->gdb_num_core_regs) {
return cc->gdb_write_register(cpu, mem_buf, reg);
}
...
}
Clarify that in CPUClass docstring, and remove unreachable code on
the microblaze and openrisc implementations.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250122093028.52416-3-philmd@linaro.org>
PropertyInfo member @name becomes ObjectProperty member @type, while
Property member @name becomes ObjectProperty member @name. Rename the
former.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250227085601.4140852-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[One missed instance of @type fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250227085601.4140852-2-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This property allows configuring whether to transfer the particular device
state via multifd channels when live migrating that device.
It defaults to AUTO, which means that VFIO device state transfer via
multifd channels is attempted in configurations that otherwise support it.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/d6dbb326e3d53c7104d62c96c9e3dd64e1c7b940.1741124640.git.maciej.szmigiero@oracle.com
[ clg: Added documentation ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Implement the multifd device state transfer via additional per-device
thread inside save_live_complete_precopy_thread handler.
Switch between doing the data transfer in the new handler and doing it
in the old save_state handler depending if VFIO multifd transfer is enabled
or not.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/4d727e2e0435e0022d50004e474077632830e08d.1741124640.git.maciej.szmigiero@oracle.com
[ clg: - Reordered savevm_vfio_handlers
- Updated save_live_complete_precopy* documentation ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The pm_cap on the PCIExpressDevice object can be distilled down
to the new instance on the PCIDevice object.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250225215237.3314011-5-alex.williamson@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The memory and IO BARs for devices are only accessible in the D0 power
state. In other power states the PCI spec defines that the device
responds to TLPs and messages with an Unsupported Request response.
To approximate this behavior, consider the BARs as unmapped when the
device is not in the D0 power state. This makes the BARs inaccessible
and has the additional bonus for vfio-pci that we don't attempt to DMA
map BARs for devices in a non-D0 power state.
To support this, an interface is added for devices to register the PM
capability, which allows central tracking to enforce valid transitions
and unmap BARs in non-D0 states.
NB. We currently have device models (eepro100 and pcie_pci_bridge)
that register a PM capability but do not set wmask to enable writes to
the power state field. In order to maintain migration compatibility,
this new helper does not manage the wmask to enable guest writes to
initiate a power state change. The contents and write access of the
PM capability are still managed by the caller.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250225215237.3314011-2-alex.williamson@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ8ezJgAKCRAfewwSUazn
0T9pAQCKb+C69kbf9cEVg7PU/z5I0ALFtCNWCKxSkWZPDPik4gEA3IYwdrJ+csuX
8nWL0fzyk+8+LDzEwEgCYoNcMnttRQw=
=P8mi
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20250305' of https://gitlab.com/bibo-mao/qemu into staging
loongarch queue
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ8ezJgAKCRAfewwSUazn
# 0T9pAQCKb+C69kbf9cEVg7PU/z5I0ALFtCNWCKxSkWZPDPik4gEA3IYwdrJ+csuX
# 8nWL0fzyk+8+LDzEwEgCYoNcMnttRQw=
# =P8mi
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Mar 2025 10:12:54 HKT
# gpg: using EDDSA key 0D8642A3A2659F80B0B3D1A41F7B0C1251ACE7D1
# gpg: Good signature from "bibo mao <maobibo@loongson.cn>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7044 3A00 19C0 E97A 31C7 13C4 8E86 8FB7 A176 9D4C
# Subkey fingerprint: 0D86 42A3 A265 9F80 B0B3 D1A4 1F7B 0C12 51AC E7D1
* tag 'pull-loongarch-20250305' of https://gitlab.com/bibo-mao/qemu:
target/loongarch: Adjust the cpu reset action to a proper position
hw/loongarch/virt: Enable cpu hotplug feature on virt machine
hw/loongarch/virt: Update the ACPI table for hotplug cpu
hw/loongarch/virt: Implement cpu plug interface
hw/loongarch/virt: Implement cpu unplug interface
hw/loongarch/virt: Add basic cpu plug interface framework
hw/loongarch/virt: Add topo properties on CPU object
hw/loongarch/virt: Add CPU topology support
hw/intc/loongarch_extioi: Use cpu plug notification
hw/intc/loongarch_extioi: Implment cpu hotplug interface
hw/intc/loongarch_extioi: Add basic hotplug framework
hw/intc/loongarch_extioi: Move gpio irq initial to common code
hw/intc/loongarch_ipi: Notify ipi object when cpu is plugged
hw/intc/loongarch_ipi: Implment cpu hotplug interface
hw/intc/loongarch_ipi: Add basic hotplug framework
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On LoongArch virt machine, ACPI GED hardware is used for CPU hotplug
handler, here CPU hotplug support feature is added based on GED handler,
also CPU scan and reject method is added about CPU device in DSDT table.
Co-developed-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Message-Id: <20250218162618.46167-8-philmd@linaro.org>
Have "hw/xen/xen-bus" include the bare minimal set of headers.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Message-Id: <20250218162618.46167-7-philmd@linaro.org>
Have "hw/xen/xen-hvm-common.h" include the bare minimal set
of headers. Adapt sources to avoid errors when refactoring
unrelated headers such:
include/hw/xen/xen-hvm-common.h:71:5: error: unknown type name ‘xenevtchn_handle’
71 | xenevtchn_handle *xce_handle;
| ^~~~~~~~~~~~~~~~
hw/xen/xen-hvm-common.c: In function ‘cpu_get_ioreq’:
hw/xen/xen-hvm-common.c:227:13: error: implicit declaration of function ‘hw_error’
227 | hw_error("Fatal error while trying to get io event!\n");
| ^~~~~~~~
| herror
hw/xen/xen-hvm-common.c: In function ‘handle_ioreq’:
hw/xen/xen-hvm-common.c:446:34: error: ‘target_ulong’ undeclared (first use in this function)
446 | (req->size < sizeof (target_ulong))) {
| ^~~~~~~~~~~~
hw/i386/xen/xen-hvm.c: In function ‘xen_add_to_physmap’:
hw/i386/xen/xen-hvm.c:298:22: error: implicit declaration of function ‘xen_replace_cache_entry’
298 | uint8_t *p = xen_replace_cache_entry(phys_offset, start_addr, size);
| ^~~~~~~~~~~~~~~~~~~~~~~
hw/i386/xen/xen-hvm.c:314:9: error: implicit declaration of function 'error_report' is invalid in C99
314 | error_report("relocate_memory %lu pages from GFN %"HWADDR_PRIx
^~~~~~~~~~~~
hw/i386/xen/xen-hvm.c: In function ‘xen_log_global_start’:
hw/i386/xen/xen-hvm.c:465:9: error: implicit declaration of function ‘xen_enabled’
465 | if (xen_enabled()) {
| ^~~~~~~~~~~
hw/i386/xen/xen-hvm.c: In function ‘regs_to_cpu’:
hw/i386/xen/xen-hvm.c:487:5: error: unknown type name ‘X86CPU’
487 | X86CPU *cpu;
| ^~~~~~
hw/i386/xen/xen-hvm.c:492:15: error: ‘R_EAX’ undeclared (first use in this function)
492 | env->regs[R_EAX] = req->data;
| ^~~~~
| REG_RAX
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Message-Id: <20250218162618.46167-6-philmd@linaro.org>
Have "hw/xen/xen-pvh-common.h" include the bare minimal set
of headers. Adapt sources to avoid errors when refactoring
unrelated headers such:
hw/i386/xen/xen-pvh.c: In function ‘xen_pvh_machine_class_init’:
hw/i386/xen/xen-pvh.c:84:28: error: ‘TARGET_DEFAULT_CPU_TYPE’ undeclared (first use in this function)
84 | mc->default_cpu_type = TARGET_DEFAULT_CPU_TYPE;
| ^~~~~~~~~~~~~~~~~~~~~~~
hw/xen/xen-pvh-common.c: In function ‘xen_pvh_init’:
hw/xen/xen-pvh-common.c:217:43: error: ‘MiB’ undeclared (first use in this function)
217 | if (s->cfg.pci_ecam.size != 256 * MiB) {
| ^~~
hw/xen/xen-hvm-common.c:18:6: error: no previous prototype for ‘xen_mr_is_memory’ [-Werror=missing-prototypes]
18 | bool xen_mr_is_memory(MemoryRegion *mr)
| ^~~~~~~~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20250218162618.46167-5-philmd@linaro.org>
acpi_ghes_memory_errors() is the only caller, no need to expose
the function. Besides, the last 'return' in this function isn't
necessary and remove it.
No functional changes intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250214041635.608012-2-gshan@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Apple has its own virtio-blk PCI device ID where it deviates from the
official virtio-pci spec slightly: It puts a new "apple type"
field at a static offset in config space and introduces a new barrier
command.
This patch first creates a mechanism for virtio-blk downstream classes to
handle unknown commands. It then creates such a downstream class and a new
vmapple-virtio-blk-pci class which support the additional apple type config
identifier as well as the barrier command.
The 'aux' or 'root' device type are selected using the 'variant' property.
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20241223221645.29911-13-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Instead of device tree or other more standardized means, VMApple passes
platform configuration to the first stage boot loader in a binary encoded
format that resides at a dedicated RAM region in physical address space.
This patch models this configuration space as a qdev device which we can
then map at the fixed location in the address space. That way, we can
influence and annotate all configuration fields easily.
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241223221645.29911-12-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The VMApple machine exposes AUX and ROOT block devices (as well as USB OTG
emulation) via virtio-pci as well as a special, simple backdoor platform
device.
This patch implements this backdoor platform device to the best of my
understanding. I left out any USB OTG parts; they're only needed for
guest recovery and I don't understand the protocol yet.
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241223221645.29911-11-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
VMApple contains an "aes" engine device that it uses to encrypt and
decrypt its nvram. It has trivial hard coded keys it uses for that
purpose.
Add device emulation for this device model.
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241223221645.29911-10-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In addition to the ISA and PCI variants of pvpanic, let's add an MMIO
platform device that we can use in embedded arm environments.
Signed-off-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241223221645.29911-8-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add state structs and function declarations for the uefi-vars device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20250225163031.1409078-5-kraxel@redhat.com>
A bunch of #defines and structs copied over from edk2,
mostly needed to decode and encode the messages in the
communication buffer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20250225163031.1409078-4-kraxel@redhat.com>
This file defines the register interface of the uefi-vars device.
It's only a handful of registers: magic value, command and status
registers, location and size of the communication buffer.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20250225163031.1409078-3-kraxel@redhat.com>
edk2 looks for the etc/hardware-info fw_cfg file to discover hardware
which can not easily be found in other ways. Entries consist of a
header with hardware type and entry size (HARDWARE_INFO_HEADER),
followed by the actual hardware description (which is type specific).
The file can have multiple entries.
This patch adds the infrastructure to add entries to the file and an
entry struct for simple devices (HARDWARE_INFO_SIMPLE_DEVICE) which have
an mmio address only.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20250225163031.1409078-2-kraxel@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-18-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split the USB MMIO regions to better keep track of the implemented vs.
unimplemented regions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-16-shentey@gmail.com
[PMM: drop "static const" from usb_table for GCC 7.5]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The i.MX 8M Plus SoC actually has two ethernet controllers, the usual ENET one
and a Designware one. There is no device model for the latter, so only add the
ENET one.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-15-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-14-shentey@gmail.com
[PMM: drop static const from gpt_attrs for GCC 7.5]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-13-shentey@gmail.com
[PMM: drop static const from wdog_table for GCC 7.5]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-12-shentey@gmail.com
[PMM: drop static const from spi_table for GCC 7.5]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-11-shentey@gmail.com
[PMM: drop static const from i2c_table for GCC 7.5]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-10-shentey@gmail.com
[PMM: drop static const from gpio_table for GCC 7.5]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Linux checks for the PLLs in the PHY to be locked, so implement a model
emulating that.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-9-shentey@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The USDHC emulation allows for running real-world images such as those generated
by Buildroot. Convert the board documentation accordingly instead of running a
Linux kernel with ephemeral storage.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-8-shentey@gmail.com
[PMM: drop 'static const' from usdhc_table[] for GCC 7.5]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SNVS contains an RTC which allows Linux to deal correctly with time. This is
particularly useful when handling persistent storage which will be done in the
next patch.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-7-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes quite a few stack traces during the Linux boot process. Also provides the
clocks for devices added later, e.g. enet1.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-6-shentey@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As a first step, implement the bare minimum: CPUs, RAM, interrupt controller,
serial. All other devices of the A53 memory map are represented as
TYPE_UNIMPLEMENTED_DEVICE, i.e. the whole memory map is provided. This allows
for running Linux without it crashing due to invalid memory accesses.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-5-shentey@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: drop 'static const' from serial_table[] definition to avoid
compile failure on GCC 7.5]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On the real device, the PCIe root bus is only connected to a PCIe bridge and
does not allow for direct attachment of devices. Doing so in QEMU results in no
PCI devices being detected by Linux. Instead, PCI devices should plug into the
secondary PCIe bus spawned by the internal PCIe bridge.
Unfortunately, QEMU defaults to plugging devices into the PCIe root bus. To work
around this, every PCI device created on the command line needs an extra
`bus=dw-pcie` option which is error prone. Fix that by marking the PCIe root bus
as full which makes QEMU decend into the child PCIe bus.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-3-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While at it add missing GUSB2RHBCTL register as found in i.MX 8M Plus reference
manual.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-2-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add has_caches flag to SMPCompatProps, which helps in avoiding
extra checks for every single layer of caches in x86 (and ARM in
future).
Signed-off-by: Alireza Sanaee <alireza.sanaee@huawei.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20250110145115.1574345-6-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Feature virtual extioi is loongArch virt machine property rather than
vCPU property in qemu side. However it is vCPU property in KVM kernel
side, here add loongArch virt machine property checking and enable virt
extioi feature when vCPU is created.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
The boston machine doesn't set MachineState::fdt to the DTB blob that
it has loaded or created, which means that the QMP/HMP dumpdtb
monitor commands don't work.
Setting MachineState::fdt is easy in the non-FIT codepath: we can
simply do so immediately before loading the DTB into guest memory.
The FIT codepath is a bit more awkward as currently the FIT loader
throws away the memory that the FDT was in after it loads it into
guest memory. So we add a void *pfdt argument to load_fit() for it
to store the FDT pointer into.
There is some readjustment required of the pointer handling in
loader-fit.c, so that it applies 'const' only where it should (e.g.
the data pointer we get back from fdt_getprop() is const, because
it's into the middle of the input FDT data, but the pointer that
fit_load_image_alloc() should not be const, because it's freshly
allocated memory that the caller can change if it likes).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250206151214.2947842-5-peter.maydell@linaro.org
The openrisc machines don't set MachineState::fdt to point to their
DTB blob. This means that although the command line '-machine
dumpdtb=file.dtb' option works, the equivalent QMP and HMP monitor
commands do not, but instead produce the error "This machine doesn't
have a FDT".
Set MachineState::fdt in openrisc_load_fdt(), when we write it to
guest memory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250206151214.2947842-3-peter.maydell@linaro.org
Features:
SR-IOV emulation for pci
virtio-mem-pci support for s390
interleave support for cxl
big endian support for vdpa svq
new QAPI events for vhost-user
Also vIOMMU reset order fixups are in.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAme4b8sPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpHKcIAKPJsVqPdda2dJ7b7FdyRT0Q+uwezXqaGHd4
7Lzih1wsxYNkwIAyPtEb76/21qiS7BluqlUCfCB66R9xWjP5/KfvAFj4/r4AEduE
fxAgYzotNpv55zcRbcflMyvQ42WGiZZHC+o5Lp7vDXUP3pIyHrl0Ydh5WmcD+hwS
BjXvda58TirQpPJ7rUL+sSfLih17zQkkDcfv5/AgorDy1wK09RBKwMx/gq7wG8yJ
twy8eBY2CmfmFD7eTM+EKqBD2T0kwLEeLfS/F/tl5Fyg6lAiYgYtCbGLpAmWErsg
XZvfZmwqL7CNzWexGvPFnnLyqwC33WUP0k0kT88Y5wh3/h98blw=
=tej8
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes, cleanups
Features:
SR-IOV emulation for pci
virtio-mem-pci support for s390
interleave support for cxl
big endian support for vdpa svq
new QAPI events for vhost-user
Also vIOMMU reset order fixups are in.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAme4b8sPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpHKcIAKPJsVqPdda2dJ7b7FdyRT0Q+uwezXqaGHd4
# 7Lzih1wsxYNkwIAyPtEb76/21qiS7BluqlUCfCB66R9xWjP5/KfvAFj4/r4AEduE
# fxAgYzotNpv55zcRbcflMyvQ42WGiZZHC+o5Lp7vDXUP3pIyHrl0Ydh5WmcD+hwS
# BjXvda58TirQpPJ7rUL+sSfLih17zQkkDcfv5/AgorDy1wK09RBKwMx/gq7wG8yJ
# twy8eBY2CmfmFD7eTM+EKqBD2T0kwLEeLfS/F/tl5Fyg6lAiYgYtCbGLpAmWErsg
# XZvfZmwqL7CNzWexGvPFnnLyqwC33WUP0k0kT88Y5wh3/h98blw=
# =tej8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 21 Feb 2025 20:21:31 HKT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (41 commits)
docs/devel/reset: Document reset expectations for DMA and IOMMU
hw/vfio/common: Add a trace point in vfio_reset_handler
hw/arm/smmuv3: Move reset to exit phase
hw/i386/intel-iommu: Migrate to 3-phase reset
hw/virtio/virtio-iommu: Migrate to 3-phase reset
vhost-user-snd: correct the calculation of config_size
net: vhost-user: add QAPI events to report connection state
hw/virtio/virtio-nsm: Respond with correct length
vdpa: Fix endian bugs in shadow virtqueue
MAINTAINERS: add more files to `vhost`
cryptodev/vhost: allocate CryptoDevBackendVhost using g_mem0()
vhost-iova-tree: Update documentation
vhost-iova-tree, svq: Implement GPA->IOVA & partial IOVA->HVA trees
vhost-iova-tree: Implement an IOVA-only tree
amd_iommu: Use correct bitmask to set capability BAR
amd_iommu: Use correct DTE field for interrupt passthrough
hw/virtio: reset virtio balloon stats on machine reset
mem/cxl_type3: support 3, 6, 12 and 16 interleave ways
hw/mem/cxl_type3: Ensure errp is set on realization failure
hw/mem/cxl_type3: Fix special_ops memory leak on msix_init_exclusive_bar() failure
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When a machine is first booted, all virtio balloon stats are initialized
to their default value -1 (18446744073709551615 when represented as
unsigned).
They remain that way while the firmware is loading, and early phase of
guest OS boot, until the virtio-balloon driver is activated. Thereafter
the reported stats reflect the guest OS activity.
When a machine reset is performed, however, the virtio-balloon stats are
left unchanged by QEMU, despite the guest OS no longer updating them,
nor indeed even still existing.
IOW, the mgmt app keeps getting stale stats until the guest OS starts
once more and loads the virtio-balloon driver (if ever). At that point
the app will see a discontinuity in the reported values as they sudden
jump from the stale value to the new value. This jump is indigituishable
from a valid data update.
While there is an "last-updated" field to report on the freshness of
the stats, that does not unambiguously tell the mgmt app whether the
stats are still conceptually relevant to the current running workload.
It is more conceptually useful to reset the stats to their default
values on machine reset, given that the previous guest workload the
stats reflect no longer exists. The mgmt app can now clearly identify
that there are is no stats information available from the current
executing workload.
The 'last-updated' time is also reset back to 0.
IOW, on every machine reset, the virtio stats are in the same clean
state they were when the macine first powered on.
A functional test is added to validate this behaviour with a real
world guest OS.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20250204094202.2183262-1-berrange@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the `CXL_T3_MSIX_VECTOR` enumeration to specify MSIX vector
assignments specific to the Type 3 (T3) CXL device.
The primary goal of this change is to encapsulate the MSIX vector uses
that are unique to the T3 device within an enumeration, improving code
readability and maintenance by avoiding magic numbers. This organizational
change allows for more explicit references to each vector’s role, thereby
reducing the potential for misconfiguration.
It also modified `mailbox_reg_init_common` to accept the `msi_n` parameter,
reflecting the new MSIX vector setup.
This pertains to the T3 device privately; other endpoints should refrain from
using it, despite its public accessibility to all of them.
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250203161908.145406-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pcie_sriov doesn't have code to restore its state after migration, but
igb, which uses pcie_sriov, naively claimed its migration capability.
Add code to register VFs after migration and fix igb migration.
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-11-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
num_vfs is not migrated so use PCI_SRIOV_CTRL_VFE and PCI_SRIOV_NUM_VF
instead.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-10-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disable SR-IOV VF devices by reusing code to power down PCI devices
instead of removing them when the guest requests to disable VFs. This
allows to realize devices and report VF realization errors at PF
realization time.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-8-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_new() aborts when creating a VF with addr >= PCI_DEVFN_MAX.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-7-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The PCS exists in NPCM8XX's GMAC1 and is used to control the SGMII
PHY. This implementation contains all the default registers and
the soft reset feature that are required to load the Linux kernel
driver. Further features have not been implemented yet.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250219184609.1839281-15-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
