In preparation to implement POOL context push, add support for POOL
NVP context save/restore.
The NVP p bit is defined in the spec as follows:
If TRUE, the CPPR of a Pool VP in the NVP is updated during store of
the context with the CPPR of the Hard context it was running under.
It's not clear whether non-pool VPs always or never get CPPR updated.
Before this patch, OS contexts always save CPPR, so we will assume that
is the behaviour.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-41-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When disabling (pulling) an xive interrupt context, we need
to redistribute any active group interrupts to other threads
that can handle the interrupt if possible. This support had
already been added for the OS context but had not yet been
added to the pool or physical context.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-28-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When an XIVE context is pulled while it has an active, unacknowledged
group interrupt, XIVE will check to see if a context on another thread
can handle the interrupt and, if so, notify that context. If there
are no contexts that can handle the interrupt, then the interrupt is
added to a backlog and XIVE will attempt to escalate the interrupt,
if configured to do so, allowing the higher privileged handler to
activate a context that can handle the original interrupt.
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-23-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add support for XIVE ESB Interrupt Escalation.
Suggested-by: Michael Kowal <kowal@linux.ibm.com>
[This change was taken from a patch provided by Michael Kowal.]
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-18-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The queue size of an Event Notification Descriptor (END)
is determined by the 'cl' and QsZ fields of the END.
If the cl field is 1, then the queue size (in bytes) will
be the size of a cache line 128B * 2^QsZ and QsZ is limited
to 4. Otherwise, it will be 4096B * 2^QsZ with QsZ limited
to 12.
Fixes: f8a233dedf ("ppc/xive2: Introduce a XIVE2 core framework")
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Caleb Schlossin <calebs@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Link: https://lore.kernel.org/qemu-devel/20250512031100.439842-4-npiggin@gmail.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When processing a backlog scan for group interrupts, also take
into account crowd interrupts.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add support for the NVPG and NVC BARs. Access to the BAR pages will
cause backlog counter operations to either increment or decriment
the counter.
Also added qtests for the same.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
If the 'H' attribute is set on the NVP structure, the hardware
automatically saves and restores some attributes from the TIMA in the
NVP structure.
The group-specific attributes LSMFB, LGS and T have an extra flag to
individually control what is saved/restored.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Adds support for single byte writes to offset 0xC38 of the TIMA address
space. When this offset is written to, the hardware disables the thread
context and copies the current state information to the odd cache line of
the pair specified by the NVT structure indexed by the THREAD CAM entry.
Note that this operation is almost identical to what we are already doing
for the "Pull OS Context to Odd Thread Reporting Line" operation except
that it also invalidates the Pool and Thread Contexts.
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The 'info pic' HMP command dumps the state of the interrupt controller.
Add the dump of the NVG and NVC tables to its output to ease debug.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The 'PGoFirst' field of a Notify Virtual Processor tells if the NVP
belongs to a VP group.
Also, print the Reporting Cache Line address, if defined.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Adds support for single byte writes to offset 0xC18 of the TIMA address
space. When this offset is written to, the hardware disables the OS
context and copies the current state information to the odd cache line
of the pair specified by the NVT structure indexed by the OS CAM entry.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Additional END state 'info pic' information as added. The 'ignore',
'crowd' and 'precluded escalation control' bits of an Event Notification
Descriptor are all used when delivering an interrupt targeting a VP-group
or crowd.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Moving xive2_nvp_pic_print_info() to align with the other "pic_print_info"
functions.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Kowal <kowal@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
xive2_regs.h only requires declarations from "qemu/bswap.h".
Include it instead of the huge target-specific "cpu.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20231122183920.17905-1-philmd@linaro.org>
A few headers neglect to include headers they need. They compile only
if something else includes the required header(s) first. Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221222104628.659681-3-armbru@redhat.com>
The XIVE interrupt controller on P10 can automatically save and
restore the state of the interrupt registers under the internal NVP
structure representing the VCPU. This saves a costly store/load in
guest entries and exits.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The XIVE2 interrupt controller of the POWER10 processor as the same
logic as on POWER9 but its SW interface has been largely reworked. The
interrupt controller has a new register interface, different BARs,
extra VSDs. These will be described when we add the device model for
the baremetal machine.
The XIVE internal structures for the EAS, END, NVT have different
layouts which is a problem for the current core XIVE framework. To
avoid adding too much complexity in the XIVE models, a new XIVE2 core
framework is introduced. It duplicates the models which are closely
linked to the XIVE internal structures : Xive2Router and
Xive2ENDSource and reuses the XiveSource, XivePresenter, XiveTCTX
models, as they are more generic.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
