Derive and implement the traits to allow comparison of two
`ApiVersion` instances for more direct and easy api version
comparisons. Further, add some basic test cases to reduce risk of
regressions.
This is useful for e.g. feature compatibility checks by comparing api
versions of remote instances.
Example comparison:
```
api_version >= ApiVersion::new(3, 3, 0)
```
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
The `ApiVersion` type was introduced in commit ba850a25
("api/api-types: refactor api endpoint version, add api types")
including the `repoid`, added for completeness when converting from
a pre-existing `ApiVersionInfo` instance, as returned by the
`version` api endpoint.
Drop the additional `repoid` field, since this is currently not used,
can be obtained fro the `ApiVersionInfo` as well and only hinders the
implementation for easy api version comparison.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
and improve the variable namign while we are at it. this allows the check to be
re-used in other code paths, like when starting a garbage collection.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
since the SyncJobConfig struct now contains a 'sync-direction' property, we can
omit the 'direction' property of the SyncJobStatus struct. This makes a
few adaptions in the ui necessary:
* use the correct field
* handle 'pull' as default (since we don't necessarily get a
'sync-direction' in that case)
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Jobs for both sync directions are now stored using the same `sync`
config section type, so drop the outdated helpers.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Dominik Csapak <d.csapak@proxmox.com>
Add the sync direction for the sync job as optional config parameter
and refrain from using the config section type for conditional
direction check, as they are now the same (see previous commit).
Use the configured sync job parameter instead of passing it to the
various methods as function parameter and only filter based on sync
direction if an optional api parameter to distingush/filter based on
direction is given.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Reviewed-by: Dominik Csapak <d.csapak@proxmox.com>
Tested-by: Dominik Csapak <d.csapak@proxmox.com>
Commit 0d66acd3 ("api types: introduce `BackupArchiveName` type")
introduced a dedicated archive name api type to add rust type
checking and bundle helpers to the api type. Since this, the backup
archive name to server archive name mapping is handled by its parser.
This however did not cover the `.conf` extension used for VM config
files. Add the missing `.conf` to `.conf.blob` to the match statement
and the test cases.
Fixes: 0d66acd3 ("api types: introduce `BackupArchiveName` type")
Reported-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
... and deserialize with default if field is missing in data.
Reported-by: Aaron Lauterer <a.lauterer@proxmox.com>
Fixes: 35fb5d4f7f ("pbs-api-types: add mount_status field to DataStoreListItem")
Signed-off-by: Hannes Laimer <h.laimer@proxmox.com>
So it is possible to reset it after a failed unmount, or abort an
unmount task by resetting it through the API.
Signed-off-by: Hannes Laimer <h.laimer@proxmox.com>
... and add MaintenanceType::Delete to it. We also want to clear any
cach entries if we are deleting the datastore, not just if it is marked
as offline.
Signed-off-by: Hannes Laimer <h.laimer@proxmox.com>
we already have two different password schemas, `PBS_PASSWORD_SCHEMA`
being the stricter one, which ensures a minimum length of new
passwords. however, this wasn't used on the change password endpoint
before, so add it there too. this is also in-line with NIST's latest
recommendations [1].
[1]: https://pages.nist.gov/800-63-4/sp800-63b.html#passwordver
Signed-off-by: Shannon Sterz <s.sterz@proxmox.com>
PathPatterns is hard to distinguish from PathPattern, so would need to be
renamed anyway.. but there isn't really a reason to define a separate API type
just for this.
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Introduces a dedicated api type `PathPattern` and the corresponding
format and input validation schema. Further, add a `PathPatterns`
type for collections of path patterns and implement required traits
to be able to replace currently defined api parameters.
In preparation for using this common api type for all api endpoints
exposing a match pattern parameter.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
This option allows us to "fix" corrupt snapshots (and/or their chunks)
by pulling them from another remote. When traversing the remote
snapshots, we check if it exists locally, and if it is, we check if the
last verification of it failed. If the local snapshot is broken and the
`resync-corrupt` option is turned on, we pull in the remote snapshot,
overwriting the local one.
This is very useful and has been requested a lot, as there is currently
no way to "fix" corrupt chunks/snapshots even if the user has a healthy
version of it on their offsite instance.
Originally-by: Shannon Sterz <s.sterz@proxmox.com>
Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Introduces a dedicated wrapper type to be used for backup archive
names instead of plain strings and associated helper methods for
archive type checks and archive name mappings.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
FG: use LazyLock for constant archive names reduces churn, and saves some
allocations
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Moving the `ArchiveType` to avoid crate dependencies on
`pbs-datastore`.
In preparation for introducing a dedicated `BackupArchiveName` api
type, allowing to set the corresponding archive type variant when
parsing the archive name based on it's filename.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
In order for sync jobs to be either pull or push jobs, allow to
configure the direction of the job.
Adds an additional config type `sync-push` to the sync job config, to
clearly distinguish sync jobs configured in pull and in push
direction and defines and implements the required `SyncDirection` api
type.
This approach was chosen in order to limit possible misconfiguration,
as unintentionally switching the sync direction could potentially
delete still required snapshots.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Add a dedicated api type for the `version` api endpoint and helper
methods for supported feature comparison.
This will be used to detect api incompatibility of older hosts, not
supporting some features.
Use the new api type to refactor the version endpoint and set it as
return type.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Make the `BackupGroupDeleteStats` exposable via the API by implementing
the ApiTypes trait via the api macro invocation and add an additional
field to account for the number of deleted groups.
Further, add a method to add up the statistics.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
In preparation for the delete stats to be exposed as return type to
the backup group delete api endpoint.
Also, rename the private field `unremoved_protected` to a better
fitting `protected_snapshots` to be in line with the method names.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Adding the privileges to allow backup, namespace creation and prune
on remote targets, to be used for sync jobs in push direction.
Also adds dedicated roles setting the required privileges.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Add `remote_acl_path` method which generates the acl path from the sync
job configuration. This helper allows to easily generate the acl path
from a given sync job config for privilege checks.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
Add a `remote_acl_path` helper method for creating acl paths for
remote namespaces, to be used by the priv checks on remote datastore
namespaces for e.g. the sync job in push direction.
Factor out the common path extension into a dedicated method.
Signed-off-by: Christian Ebner <c.ebner@proxmox.com>
removable datastores will have a PBS-managed mountpoint as path, direct
access to the field needs to be replaced with a helper that can account
for this.
Signed-off-by: Hannes Laimer <h.laimer@proxmox.com>
The rate and burst parameters are integers, so the mapping from value
with `.as_str()` will always return `None` effectively never
applying any rate limit at all.
Fix it by turning them into a HumanByte instead of an integer.
To not crowd the parameter section so much, create a
ClientRateLimitConfig struct that gets flattened into the parameter list
of the backup client.
To adapt the description of the parameters, add new schemas that copy
the `HumanByte` schema but change the description.
With this, the rate limit actually works, and there is no lower limit
any more.
The old TRAFFIC_CONTROL_RATE/BURST_SCHEMAs can be deleted since the
client was the only user of them.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Since we don't query each drives status seperately, but rely on a single
call to the drives listing parameter for that, we now add the option
to query the activity there too. This makes that data avaiable for us
to show in a seperate (by default hidden) column.
Also we show the activity in the 'State' column when the drive is idle
from our perspective. This is useful when e.g. an LTO-9 tape is loaded
the first time and is calibrating, since that happens automatically.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
we use the VHF part from the DT Device Activity page for that.
This is intended to query the drive for it's current state and activity.
Currently only the activity is parsed and used.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
and show them on the ui. This can help uses with seeing how much a tape
is used.
The value is updated on 'commit' and when the tape is changed during a
backup.
For drives not supporting the volume statistics, this is simply skipped.
Signed-off-by: Dominik Csapak <d.csapak@proxmox.com>
Remove the regex for influxdb organizations and buckets. Influxdb does
not place any constraints on these names and allows all characters. This
allows influxdb organization names with slashes.
Also remove a duplicate comment and add some missing ones.
This also aligns the behavior to PVE as there are no restrictions there
either.
The motivation for this patch is this forum post:
https://forum.proxmox.com/threads/influx-db-organization-doesnt-allow-slash.145402/
Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
* Add vlan_id and vlan_raw_device fields to the Interface api type
* Write to the network config the vlan specific properties for vlan
interface type
* Add several tests to verify the functionally
Signed-off-by: Stefan Lendl <s.lendl@proxmox.com>
Tested-by: Lukas Wagner <l.wagner@proxmox.com>
Reviewed-by: Lukas Wagner <l.wagner@proxmox.com>
Tested-by: Folke Gleumes <f.gleumes@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Basically just a thin wrapper over the existing LDAP-based realm sync
job, which retrieves the appropriate config and sets the correct user
attributes.
Signed-off-by: Christoph Heiss <c.heiss@proxmox.com>
Reviewed-by: Lukas Wagner <l.wagner@proxmox.com>
Tested-by: Lukas Wagner <l.wagner@proxmox.com>
