This patch adds the following helper functions for reuse of code,
hiding BE/LE differences and maintainability.
All of the functions were defined as static force_inline.
Names were copied from pixman-sse2.c so conversion of fast-paths between
sse2 and vmx would be easier from now on. Therefore, I tried to keep the
input/output of the functions to be as close as possible to the sse2
definitions.
The functions are:
- load_128_aligned : load 128-bit from a 16-byte aligned memory
address into a vector
- load_128_unaligned : load 128-bit from memory into a vector,
without guarantee of alignment for the
source pointer
- save_128_aligned : save 128-bit vector into a 16-byte aligned
memory address
- create_mask_16_128 : take a 16-bit value and fill with it
a new vector
- create_mask_1x32_128 : take a 32-bit pointer and fill a new
vector with the 32-bit value from that pointer
- create_mask_32_128 : take a 32-bit value and fill with it
a new vector
- unpack_32_1x128 : unpack 32-bit value into a vector
- unpacklo_128_16x8 : unpack the eight low 8-bit values of a vector
- unpackhi_128_16x8 : unpack the eight high 8-bit values of a vector
- unpacklo_128_8x16 : unpack the four low 16-bit values of a vector
- unpackhi_128_8x16 : unpack the four high 16-bit values of a vector
- unpack_128_2x128 : unpack the eight low 8-bit values of a vector
into one vector and the eight high 8-bit
values into another vector
- unpack_128_2x128_16 : unpack the four low 16-bit values of a vector
into one vector and the four high 16-bit
values into another vector
- unpack_565_to_8888 : unpack an RGB_565 vector to 8888 vector
- pack_1x128_32 : pack a vector and return the LSB 32-bit of it
- pack_2x128_128 : pack two vectors into one and return it
- negate_2x128 : xor two vectors with mask_00ff (separately)
- is_opaque : returns whether all the pixels contained in
the vector are opaque
- is_zero : returns whether the vector equals 0
- is_transparent : returns whether all the pixels
contained in the vector are transparent
- expand_pixel_8_1x128 : expand an 8-bit pixel into lower 8 bytes of a
vector
- expand_alpha_1x128 : expand alpha from vector and return the new
vector
- expand_alpha_2x128 : expand alpha from one vector and another alpha
from a second vector
- expand_alpha_rev_2x128 : expand a reversed alpha from one vector and
another reversed alpha from a second vector
- pix_multiply_2x128 : do pix_multiply for two vectors (separately)
- over_2x128 : perform over op. on two vectors
- in_over_2x128 : perform in-over op. on two vectors
v2: removed expand_pixel_32_1x128 as it was not used by any function and
its implementation was erroneous
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
This patch adds a macro for loading a single vector.
It also make the other LOAD_VECTORx macros use this macro as a base so
code would be re-used.
In addition, I fixed minor coding style issues.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
The memcpy speed measurement takes several seconds. When you are running
single tests in a harness that iterates dozens or hundreds of times, the
repeated measurements are redundant and take a lot of time. It is also
an open question whether the measured speed changes over long test runs
due to unidentified platform reasons (Raspberry Pi).
Add a command line option to set the reference memcpy speed, skipping
the measuring.
The speed is mainly used to compute how many iterations do run inside
the bench_*() functions, so for repeated testing on the same hardware,
it makes sense to lock that number to a constant.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ben Avison <bavison@riscosopen.org>
Add a command line option for choosing CSV output mode.
In CSV mode, only the results in Mpixels/s are printed in an easily
machine-parseable format. All user-friendly printing is suppressed.
This is intended for cases where you benchmark one particular operation
at a time. Running the "all" set of benchmarks will print just fine, but
you may have trouble matching rows to operations as you have to look at
the tests_tbl[] to see what row is which.
Reviewed-by: Ben Avison <bavison@riscosopen.org>
v2: don't add a space after comma in CSV.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Refactor the Mpixels/s computations into a function. Easier to read and
better documents what is being computed.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ben Avison <bavison@riscosopen.org>
The bench_* functions, that did not already do it, are modified to
return the number of pixels processed during the benchmark. This moves
the computation to the site that actually determines the number, and
simplifies bench_composite() a bit.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ben Avison <bavison@riscosopen.org>
Move the printing of the memory speed and scaling mode into a new
function. This will help with implementing a machine-readable output
option.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ben Avison <bavison@riscosopen.org>
When given just a single test pattern instead of "all", print the test
details. This can be used to verify the pattern parser agrees with the
user, just like scaling settings are printed.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ben Avison <bavison@riscosopen.org>
We assign string literals to it, so it better be const.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ben Avison <bavison@riscosopen.org>
Move explanation printing to a new function. This will help with
implementing a machine-readable output option.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ben Avison <bavison@riscosopen.org>
Move printing of usage into a new function and use argv[0] as the
program name. This will help printing usage from multiple places.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ben Avison <bavison@riscosopen.org>
vec_mergeh/l operates differently for BE and LE, because of the order of
the vector elements (l->r in BE and r->l in LE).
To fix that, we simply need to swap between the input parameters, in case
we are working in LE.
v2:
- replace _LITTLE_ENDIAN with WORDS_BIGENDIAN for consistency
- fixed whitespaces and indentation issues
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v2: don't put ';' at the end of macro definition. Instead, move it to
each line the macro is used.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v2: fixed whitespaces and indentation issues
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Replaced usage of vec_lvsl to direct unaligned assignment
operation (=). That is because, according to Power ABI Specification,
the usage of lvsl is deprecated on ppc64le.
Changed COMPUTE_SHIFT_{MASK,MASKS,MASKC} macro usage to no-op for powerpc
little endian since unaligned access is supported on ppc64le.
v2:
- replace _LITTLE_ENDIAN with WORDS_BIGENDIAN for consistency
- fixed whitespaces and indentation issues
Signed-off-by: Fernando Seiti Furusato <ferseiti@linux.vnet.ibm.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The permutation vector isn't correct for LE, so correct its values
in case we are in LE mode.
v2:
- replace _LITTLE_ENDIAN with WORDS_BIGENDIAN for consistency
- change #ifndef to #ifdef for readability
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
These two architectures were the only place where
SIMPLE_NEAREST_SOLID_MASK_FAST_PATH was used, and in both cases the
equivalent SIMPLE_NEAREST_SOLID_MASK_FAST_PATH_NORMAL macro was used
immediately afterwards, so including the NORMAL case in the main macro
simplifies the fast path table.
[Pekka: removed extra comma from the end of
SIMPLE_NEAREST_SOLID_MASK_FAST_PATH]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
There is some reordering, but the only significant thing to ensure that
the same routine is chosen is that a COVER fast path for a given
combination of operator and source/destination pixel formats must
precede all the variants of repeated fast paths for the same
combination. This patch (and the other mmx/sse2 one) still follows that
rule.
I believe that in every other case, the set of operations that match any
pair of fast paths that are reordered in these patches are mutually
exclusive. While there will be a very subtle timing difference due to
the distance through the table we have to search to find a match
(sometimes faster, sometime slower) there is no evidence that the tables
have been carefully ordered by frequency of occurrence - just for ease
of copy-and-pasting.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
This macro does exactly the same thing as the platform-neutral macro
SIMPLE_NEAREST_A8_MASK_FAST_PATH.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
This macro is a superset of the platform-neutral macro
SIMPLE_NEAREST_A8_MASK_FAST_PATH. In other words, in addition to the
_COVER, _NONE and _PAD suffixes, its expansion includes the _NORMAL suffix.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
This macro does exactly the same thing as the platform-neutral macro
SIMPLE_NEAREST_FAST_PATH.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
When generating test data, we need to make sure the interpretation of
the data is the same regardless of endianess. That is, the pixel value
for each channel is the same on both little and big-endians.
This fixes a test failure on ppc64 (big-endian).
Tested-by: Fernando Seiti Furusato <ferseiti@linux.vnet.ibm.com> (ppc64le, ppc64, powerpc)
Tested-by: Ben Avison <bavison@riscosopen.org> (armv6l, armv7l, i686)
[Pekka: added commit message]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk> (x86_64)
This places a heavier emphasis on solid images than the other fuzz testers,
and tests both single-pixel repeating bitmap images as well as those created
using pixman_image_create_solid_fill(). In the former case, it also
exercises the case where the bitmap contents are written to after the
image's first use, which is not a use-case that any other test has
previously covered.
[Pekka: added the default case to the switch in test_solid ().]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Commit 6d2cf40166 ("MIPS: Fix exported symbols in public API") attempted to
add a .hidden assembly directive, conditional on the code being compiled for an
ELF target. Unfortunately the #ifdef added was already inside a macro and
wasn't expanded properly by the preprocessor.
Fix by removing the check. It's unlikely there are many non-ELF MIPS systems
around anyway.
Fixes: Bug 83358 (https://bugs.freedesktop.org/83358)
Fixes: 6d2cf40166 ("MIPS: Fix exported symbols in public API")
Signed-off-by: James Cowgill <james410@cowgill.org.uk>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Nemanja Lukic <nemanja.lukic@rt-rk.com>
Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Affine-bench is written by following the example of lowlevel-blt-bench.
Affine-bench differs from lowlevel-blt-bench in the following:
- does not test different sized operations fitting to specific caches,
destination is always 1920x1080
- allows defining the affine transformation parameters
- carefully computes operation extents to hit the COVER_CLIP fast paths
Original version by Ben Avison. Changes by Pekka in v3:
- commit message
- style fixes
- more comments
- refactoring (e.g. bench_info_t)
- help output tweak
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ben Avison <bavison@riscosopen.org>
When doing component alpha with a solid mask, use a mask format that has
all the color channels instead of just a8. As Ben Avison explains it:
"Lowlevel-blt-bench initialises all its images using memset(0xCC) so an
a8 solid image would be converted by _pixman_image_get_solid() to
0xCC000000 whereas an a8r8g8b8 would be 0xCCCCCCCC. When you're not in
component alpha mode, only the alpha byte matters for the mask image,
but in the case of component alpha operations, a fast path might decide
that it can save itself a lot of multiplications if it spots that 3
constant mask components are already 0."
No (default) test so far has a solid mask with CA. This is just
future-proofing lowlevel-blt-bench to do what one would expect.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ben Avison <bavison@riscosopen.org>
Let lowlevel-blt-bench parse the test name string from the command line,
allowing to run almost infinitely more tests. One is no longer limited
to the tests listed in the big table.
While you can use the old short-hand names like src_8888_8888, you can
also use all possible operators now, and specify pixel formats exactly
rather than just x888, for instance.
This even allows to run crazy patterns like
conjoint_over_reverse_a8b8g8r8_n_r8g8b8x8.
All individual patterns are now interpreted through the parser. The
pattern "all" runs the same old default test set as before but through
the parser instead of the hard-coded parameters.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ben Avison <bavison@riscosopen.org>
This patch is inspired by "lowlevel-blt-bench: Parse test name strings in
general case" by Ben Avison. From Ben's commit message:
"There are many types of composite operation that are useful to benchmark
but which are omitted from the table. Continually having to add extra
entries to the table is a nuisance and is prone to human error, so this
patch adds the ability to break down unknow strings of the format
<operation>_<src>[_<mask]_<dst>[_ca]
where bitmap formats are specified by number of bits of each component
(assumed in ARGB order) or 'n' to indicate a solid source or mask."
Add the parser to lowlevel-blt-bench.c, but do not hook it up to the
command line just yet. Instead, make it run a self-test.
As we now dynamically parse strings similar to the test names in the
huge table 'tests_tbl', we should make sure we can parse the old
well-known test names and produce exactly the same test parameters. The
self-test goes through this old table and verifies the parsing results.
Unfortunately the old table is not exactly consistent, it contains some
special cases that cannot be produced by the parsing rules. Whether
these special cases are intentional or just an oversight is not always
clear. Anyway, add a small table to reproduce the special cases
verbatim.
If we wanted, we could remove the big old table in a follow-up commit,
but then we would also lose the parser self-test.
The point of this whole excercise to let lowlevel-blt-bench recognize
novel test patterns in the future, following exactly the conventions
used in the old table.
Ben, from what I see, this parser has one major difference to what you
wrote. For a solid mask, your parser uses a8r8g8b8 format, while mine
uses a8 which comes from the old table.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ben Avison <bavison@riscosopen.org>
Lowlevel-blt-bench uses several pixel format shorthands. Pick them from
the great table in lowlevel-blt-bench.c and add them here so that
format_from_string() can recognize them.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ben Avison <bavison@riscosopen.org>
Lowlevel-blt-bench uses the operator alias "outrev". Add an alias for it
in the operator-name table.
Also add aliases for overrev, inrev and atoprev, so that
lowlevel-blt-bench can later recognize them for new test cases.
The aliases are added such, that an operator to name lookup will never
return them; it returns the proper names instead.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ben Avison <bavison@riscosopen.org>
Previously there was a flat list of formats, used to iterate over all
formats when looking up a format from name or listing them. This cannot
support name aliases.
To support name aliases (multiple name strings mapping to the same
format), create a format-name mapping table. Functions format_name(),
format_from_string(), and list_formats() should keep on working exactly
like before, except format_from_string() now recognizes the additional
formats that format_name() already supported.
The only the formats from the old format list are added with ENTRY, so
that list_formats() works as before. The whole list is verified against
the authoritative list in pixman.h, entries missing from the old list
are commented out.
The extra formats supported by the old format_name() are added as
ALIASes. A side-effect of that is that now also format_from_string()
recognizes the following new names: x4c4 / c8, x4g4 / g8, c4, g4, g1,
yuy2, yv12, null, solid, pixbuf, rpixbuf, unknown.
Name aliases will be useful in follow-up patches, where
lowlevel-blt-bench.c is converted to parse short-hand format names from
strings.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ben Avison <bavison@riscosopen.org>
Previously there was a flat list of operators (pixman_op_t), used to
iterate over all operators when looking up an operator from name or
listing them. This cannot support name aliases.
To support name aliases (multiple name strings mapping to the same
operator), create an operator-name mapping table. Functions
operator_name, operator_from_string, and list_operators should keep on
working exactly like before, except operator_from_string now recognizes
a few aliases too.
Name aliases will be useful in follow-up patches, where
lowlevel-blt-bench.c is converted to parse operator names from strings.
Lowlevel-blt-bench uses shorthand names instead of the usual names. This
change allows lowlevel-blt-bench.s to use operator_from_string in the
future.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ben Avison <bavison@riscosopen.org>
This permits format_from_string(), list_formats(), list_operators() and
operator_from_string() to be used from tests other than check-formats.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
A few violations of coding style were identified in code copied from here
into affine-bench.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Using "--disable-sse2 --disable-ssse3" configure options and
CFLAGS="-m32 -O2 -g" on an x86 system results in pixman "make check"
failures:
../test-driver: line 95: 29874 Aborted
FAIL: affine-test
../test-driver: line 95: 29887 Aborted
FAIL: scaling-test
One _mm_empty () was missing and another one is needed to workaround
an old GCC bug https://gcc.gnu.org/PR47759 (GCC may move MMX instructions
around and cause test suite failures).
Reviewed-by: Matt Turner <mattst88@gmail.com>
Since a4c79d695d the constant
BILINEAR_INTERPOLATION_BITS must be strictly less than 8, so fix the
comment to say this, and also add a COMPILE_TIME_ASSERT in the
bilinear fetcher in pixman-fast-path.c
