linux/tools/testing/selftests/net/forwarding/pedit_dsfield.sh
Petr Machata d7442b7d28 selftests: forwarding: skbedit_priority: Disable IPv6 autogen on a bridge
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.

At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.

The selftest itself however checks operation of pedit on IPv4 and IPv6
dsfield and its parts. The bridge thus does not need to participate in
routing traffic and the IP address or the RIF are irrelevant.

Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Since the bridge is only used for L2 forwarding, this change should not
hinder usefulness of this selftest for testing SW datapath or HW datapaths
in other devices.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21 14:02:52 -07:00

314 lines
6.7 KiB
Bash
Executable File

#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# This test sends traffic from H1 to H2. Either on ingress of $swp1, or on
# egress of $swp2, the traffic is acted upon by a pedit action. An ingress
# filter installed on $h2 verifies that the packet looks like expected.
#
# +----------------------+ +----------------------+
# | H1 | | H2 |
# | + $h1 | | $h2 + |
# | | 192.0.2.1/28 | | 192.0.2.2/28 | |
# +----|-----------------+ +----------------|-----+
# | |
# +----|----------------------------------------------------------------|-----+
# | SW | | |
# | +-|----------------------------------------------------------------|-+ |
# | | + $swp1 BR $swp2 + | |
# | +--------------------------------------------------------------------+ |
# +---------------------------------------------------------------------------+
ALL_TESTS="
ping_ipv4
ping_ipv6
test_ip_dsfield
test_ip_dscp
test_ip_ecn
test_ip_dscp_ecn
test_ip6_dsfield
test_ip6_dscp
test_ip6_ecn
"
NUM_NETIFS=4
source lib.sh
source tc_common.sh
: ${HIT_TIMEOUT:=2000} # ms
h1_create()
{
simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
}
h1_destroy()
{
simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64
}
h2_create()
{
simple_if_init $h2 192.0.2.2/28 2001:db8:1::2/64
tc qdisc add dev $h2 clsact
}
h2_destroy()
{
tc qdisc del dev $h2 clsact
simple_if_fini $h2 192.0.2.2/28 2001:db8:1::2/64
}
switch_create()
{
ip link add name br1 type bridge vlan_filtering 1
ip link set dev br1 addrgenmode none
ip link set dev br1 up
ip link set dev $swp1 master br1
ip link set dev $swp1 up
ip link set dev $swp2 master br1
ip link set dev $swp2 up
tc qdisc add dev $swp1 clsact
tc qdisc add dev $swp2 clsact
}
switch_destroy()
{
tc qdisc del dev $swp2 clsact
tc qdisc del dev $swp1 clsact
ip link set dev $swp2 down
ip link set dev $swp2 nomaster
ip link set dev $swp1 down
ip link set dev $swp1 nomaster
ip link del dev br1
}
setup_prepare()
{
h1=${NETIFS[p1]}
swp1=${NETIFS[p2]}
swp2=${NETIFS[p3]}
h2=${NETIFS[p4]}
h2mac=$(mac_get $h2)
vrf_prepare
h1_create
h2_create
switch_create
}
cleanup()
{
pre_cleanup
switch_destroy
h2_destroy
h1_destroy
vrf_cleanup
}
ping_ipv4()
{
ping_test $h1 192.0.2.2
}
ping_ipv6()
{
ping6_test $h1 2001:db8:1::2
}
do_test_pedit_dsfield_common()
{
local pedit_locus=$1; shift
local pedit_action=$1; shift
local mz_flags=$1; shift
RET=0
# TOS 125: DSCP 31, ECN 1. Used for testing that the relevant part is
# overwritten when zero is selected.
$MZ $mz_flags $h1 -c 10 -d 20msec -p 100 \
-a own -b $h2mac -q -t tcp tos=0x7d,sp=54321,dp=12345
local pkts
pkts=$(busywait "$TC_HIT_TIMEOUT" until_counter_is ">= 10" \
tc_rule_handle_stats_get "dev $h2 ingress" 101)
check_err $? "Expected to get 10 packets on test probe, but got $pkts."
pkts=$(tc_rule_handle_stats_get "$pedit_locus" 101)
((pkts >= 10))
check_err $? "Expected to get 10 packets on pedit rule, but got $pkts."
log_test "$pedit_locus pedit $pedit_action"
}
do_test_pedit_dsfield()
{
local pedit_locus=$1; shift
local pedit_action=$1; shift
local match_prot=$1; shift
local match_flower=$1; shift
local mz_flags=$1; shift
local saddr=$1; shift
local daddr=$1; shift
tc filter add $pedit_locus handle 101 pref 1 \
flower action pedit ex munge $pedit_action
tc filter add dev $h2 ingress handle 101 pref 1 prot $match_prot \
flower skip_hw $match_flower action pass
do_test_pedit_dsfield_common "$pedit_locus" "$pedit_action" "$mz_flags"
tc filter del dev $h2 ingress pref 1
tc filter del $pedit_locus pref 1
}
do_test_ip_dsfield()
{
local locus=$1; shift
local dsfield
for dsfield in 0 1 2 3 128 252 253 254 255; do
do_test_pedit_dsfield "$locus" \
"ip dsfield set $dsfield" \
ip "ip_tos $dsfield" \
"-A 192.0.2.1 -B 192.0.2.2"
done
}
test_ip_dsfield()
{
do_test_ip_dsfield "dev $swp1 ingress"
do_test_ip_dsfield "dev $swp2 egress"
}
do_test_ip_dscp()
{
local locus=$1; shift
local dscp
for dscp in 0 1 2 3 32 61 62 63; do
do_test_pedit_dsfield "$locus" \
"ip dsfield set $((dscp << 2)) retain 0xfc" \
ip "ip_tos $(((dscp << 2) | 1))" \
"-A 192.0.2.1 -B 192.0.2.2"
done
}
test_ip_dscp()
{
do_test_ip_dscp "dev $swp1 ingress"
do_test_ip_dscp "dev $swp2 egress"
}
do_test_ip_ecn()
{
local locus=$1; shift
local ecn
for ecn in 0 1 2 3; do
do_test_pedit_dsfield "$locus" \
"ip dsfield set $ecn retain 0x03" \
ip "ip_tos $((124 | $ecn))" \
"-A 192.0.2.1 -B 192.0.2.2"
done
}
test_ip_ecn()
{
do_test_ip_ecn "dev $swp1 ingress"
do_test_ip_ecn "dev $swp2 egress"
}
do_test_ip_dscp_ecn()
{
local locus=$1; shift
tc filter add $locus handle 101 pref 1 \
flower action pedit ex munge ip dsfield set 124 retain 0xfc \
action pedit ex munge ip dsfield set 1 retain 0x03
tc filter add dev $h2 ingress handle 101 pref 1 prot ip \
flower skip_hw ip_tos 125 action pass
do_test_pedit_dsfield_common "$locus" "set DSCP + set ECN" \
"-A 192.0.2.1 -B 192.0.2.2"
tc filter del dev $h2 ingress pref 1
tc filter del $locus pref 1
}
test_ip_dscp_ecn()
{
do_test_ip_dscp_ecn "dev $swp1 ingress"
do_test_ip_dscp_ecn "dev $swp2 egress"
}
do_test_ip6_dsfield()
{
local locus=$1; shift
local dsfield
for dsfield in 0 1 2 3 128 252 253 254 255; do
do_test_pedit_dsfield "$locus" \
"ip6 traffic_class set $dsfield" \
ipv6 "ip_tos $dsfield" \
"-6 -A 2001:db8:1::1 -B 2001:db8:1::2"
done
}
test_ip6_dsfield()
{
do_test_ip6_dsfield "dev $swp1 ingress"
do_test_ip6_dsfield "dev $swp2 egress"
}
do_test_ip6_dscp()
{
local locus=$1; shift
local dscp
for dscp in 0 1 2 3 32 61 62 63; do
do_test_pedit_dsfield "$locus" \
"ip6 traffic_class set $((dscp << 2)) retain 0xfc" \
ipv6 "ip_tos $(((dscp << 2) | 1))" \
"-6 -A 2001:db8:1::1 -B 2001:db8:1::2"
done
}
test_ip6_dscp()
{
do_test_ip6_dscp "dev $swp1 ingress"
do_test_ip6_dscp "dev $swp2 egress"
}
do_test_ip6_ecn()
{
local locus=$1; shift
local ecn
for ecn in 0 1 2 3; do
do_test_pedit_dsfield "$locus" \
"ip6 traffic_class set $ecn retain 0x3" \
ipv6 "ip_tos $((124 | $ecn))" \
"-6 -A 2001:db8:1::1 -B 2001:db8:1::2"
done
}
test_ip6_ecn()
{
do_test_ip6_ecn "dev $swp1 ingress"
do_test_ip6_ecn "dev $swp2 egress"
}
trap cleanup EXIT
setup_prepare
setup_wait
tests_run
exit $EXIT_STATUS