Proxmox-Port/linux
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2025-08-25 05:30:37 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
master
linux/arch/mips/alchemy/devboards/db1000.c
Dmitry Torokhov 02c76df921 MIPS: Alchemy: switch to use software nodes for GPIOs 
Switch to use software nodes/properties to describe GPIOs for the
ADS7846 touchscreen and the SPI controller (away from using GPIO lookup
tables). This allows removing use of ADS7846 platform data, which will
be going away.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-07-03 17:15:17 +02:00

576 lines
14 KiB
C
Raw Permalink Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* DBAu1000/1500/1100 PBAu1100/1500 board support
*
* Copyright 2000, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*/
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/gpio/property.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/leds.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/pm.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/gpio-au1000.h>
#include <asm/mach-au1x00/au1000_dma.h>
#include <asm/mach-au1x00/au1100_mmc.h>
#include <asm/mach-db1x00/bcsr.h>
#include <asm/reboot.h>
#include <prom.h>
#include "platform.h"
#define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT)
const char *get_system_type(void);
int __init db1000_board_setup(void)
{
/* initialize board register space */
bcsr_init(DB1000_BCSR_PHYS_ADDR,
DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
case BCSR_WHOAMI_DB1000:
case BCSR_WHOAMI_DB1500:
case BCSR_WHOAMI_DB1100:
case BCSR_WHOAMI_PB1500:
case BCSR_WHOAMI_PB1500R2:
case BCSR_WHOAMI_PB1100:
pr_info("AMD Alchemy %s Board\n", get_system_type());
return 0;
}
return -ENODEV;
}
static int db1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
{
if ((slot < 12) || (slot > 13) || pin == 0)
return -1;
if (slot == 12)
return (pin == 1) ? AU1500_PCI_INTA : 0xff;
if (slot == 13) {
switch (pin) {
case 1: return AU1500_PCI_INTA;
case 2: return AU1500_PCI_INTB;
case 3: return AU1500_PCI_INTC;
case 4: return AU1500_PCI_INTD;
}
}
return -1;
}
static u64 au1xxx_all_dmamask = DMA_BIT_MASK(32);
static struct resource alchemy_pci_host_res[] = {
[0] = {
.start = AU1500_PCI_PHYS_ADDR,
.end = AU1500_PCI_PHYS_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
};
static struct alchemy_pci_platdata db1500_pci_pd = {
.board_map_irq = db1500_map_pci_irq,
};
static struct platform_device db1500_pci_host_dev = {
.dev.platform_data = &db1500_pci_pd,
.name = "alchemy-pci",
.id = 0,
.num_resources = ARRAY_SIZE(alchemy_pci_host_res),
.resource = alchemy_pci_host_res,
};
int __init db1500_pci_setup(void)
{
return platform_device_register(&db1500_pci_host_dev);
}
static struct resource au1100_lcd_resources[] = {
[0] = {
.start = AU1100_LCD_PHYS_ADDR,
.end = AU1100_LCD_PHYS_ADDR + 0x800 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AU1100_LCD_INT,
.end = AU1100_LCD_INT,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device au1100_lcd_device = {
.name = "au1100-lcd",
.id = 0,
.dev = {
.dma_mask = &au1xxx_all_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(au1100_lcd_resources),
.resource = au1100_lcd_resources,
};
static struct resource alchemy_ac97c_res[] = {
[0] = {
.start = AU1000_AC97_PHYS_ADDR,
.end = AU1000_AC97_PHYS_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = DMA_ID_AC97C_TX,
.end = DMA_ID_AC97C_TX,
.flags = IORESOURCE_DMA,
},
[2] = {
.start = DMA_ID_AC97C_RX,
.end = DMA_ID_AC97C_RX,
.flags = IORESOURCE_DMA,
},
};
static struct platform_device alchemy_ac97c_dev = {
.name = "alchemy-ac97c",
.id = -1,
.resource = alchemy_ac97c_res,
.num_resources = ARRAY_SIZE(alchemy_ac97c_res),
};
static struct platform_device alchemy_ac97c_dma_dev = {
.name = "alchemy-pcm-dma",
.id = 0,
};
static struct platform_device db1x00_codec_dev = {
.name = "ac97-codec",
.id = -1,
};
static struct platform_device db1x00_audio_dev = {
.name = "db1000-audio",
.dev = {
.dma_mask = &au1xxx_all_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
/******************************************************************************/
#ifdef CONFIG_MMC_AU1X
static irqreturn_t db1100_mmc_cd(int irq, void *ptr)
{
mmc_detect_change(ptr, msecs_to_jiffies(500));
return IRQ_HANDLED;
}
static int db1100_mmc_cd_setup(void *mmc_host, int en)
{
int ret = 0, irq;
if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1100)
irq = AU1100_GPIO19_INT;
else
irq = AU1100_GPIO14_INT; /* PB1100 SD0 CD# */
if (en) {
irq_set_irq_type(irq, IRQ_TYPE_EDGE_BOTH);
ret = request_irq(irq, db1100_mmc_cd, 0,
"sd0_cd", mmc_host);
} else
free_irq(irq, mmc_host);
return ret;
}
static int db1100_mmc1_cd_setup(void *mmc_host, int en)
{
int ret = 0, irq;
if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1100)
irq = AU1100_GPIO20_INT;
else
irq = AU1100_GPIO15_INT; /* PB1100 SD1 CD# */
if (en) {
irq_set_irq_type(irq, IRQ_TYPE_EDGE_BOTH);
ret = request_irq(irq, db1100_mmc_cd, 0,
"sd1_cd", mmc_host);
} else
free_irq(irq, mmc_host);
return ret;
}
static int db1100_mmc_card_readonly(void *mmc_host)
{
/* testing suggests that this bit is inverted */
return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 0 : 1;
}
static int db1100_mmc_card_inserted(void *mmc_host)
{
return !alchemy_gpio_get_value(19);
}
static void db1100_mmc_set_power(void *mmc_host, int state)
{
int bit;
if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1100)
bit = BCSR_BOARD_SD0PWR;
else
bit = BCSR_BOARD_PB1100_SD0PWR;
if (state) {
bcsr_mod(BCSR_BOARD, 0, bit);
msleep(400); /* stabilization time */
} else
bcsr_mod(BCSR_BOARD, bit, 0);
}
static void db1100_mmcled_set(struct led_classdev *led, enum led_brightness b)
{
if (b != LED_OFF)
bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
else
bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
}
static struct led_classdev db1100_mmc_led = {
.brightness_set = db1100_mmcled_set,
};
static int db1100_mmc1_card_readonly(void *mmc_host)
{
return (bcsr_read(BCSR_BOARD) & BCSR_BOARD_SD1WP) ? 1 : 0;
}
static int db1100_mmc1_card_inserted(void *mmc_host)
{
return !alchemy_gpio_get_value(20);
}
static void db1100_mmc1_set_power(void *mmc_host, int state)
{
int bit;
if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1100)
bit = BCSR_BOARD_SD1PWR;
else
bit = BCSR_BOARD_PB1100_SD1PWR;
if (state) {
bcsr_mod(BCSR_BOARD, 0, bit);
msleep(400); /* stabilization time */
} else
bcsr_mod(BCSR_BOARD, bit, 0);
}
static void db1100_mmc1led_set(struct led_classdev *led, enum led_brightness b)
{
if (b != LED_OFF)
bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
else
bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
}
static struct led_classdev db1100_mmc1_led = {
.brightness_set = db1100_mmc1led_set,
};
static struct au1xmmc_platform_data db1100_mmc_platdata[2] = {
[0] = {
.cd_setup = db1100_mmc_cd_setup,
.set_power = db1100_mmc_set_power,
.card_inserted = db1100_mmc_card_inserted,
.card_readonly = db1100_mmc_card_readonly,
.led = &db1100_mmc_led,
},
[1] = {
.cd_setup = db1100_mmc1_cd_setup,
.set_power = db1100_mmc1_set_power,
.card_inserted = db1100_mmc1_card_inserted,
.card_readonly = db1100_mmc1_card_readonly,
.led = &db1100_mmc1_led,
},
};
static struct resource au1100_mmc0_resources[] = {
[0] = {
.start = AU1100_SD0_PHYS_ADDR,
.end = AU1100_SD0_PHYS_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AU1100_SD_INT,
.end = AU1100_SD_INT,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = DMA_ID_SD0_TX,
.end = DMA_ID_SD0_TX,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = DMA_ID_SD0_RX,
.end = DMA_ID_SD0_RX,
.flags = IORESOURCE_DMA,
}
};
static struct platform_device db1100_mmc0_dev = {
.name = "au1xxx-mmc",
.id = 0,
.dev = {
.dma_mask = &au1xxx_all_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &db1100_mmc_platdata[0],
},
.num_resources = ARRAY_SIZE(au1100_mmc0_resources),
.resource = au1100_mmc0_resources,
};
static struct resource au1100_mmc1_res[] = {
[0] = {
.start = AU1100_SD1_PHYS_ADDR,
.end = AU1100_SD1_PHYS_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AU1100_SD_INT,
.end = AU1100_SD_INT,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = DMA_ID_SD1_TX,
.end = DMA_ID_SD1_TX,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = DMA_ID_SD1_RX,
.end = DMA_ID_SD1_RX,
.flags = IORESOURCE_DMA,
}
};
static struct platform_device db1100_mmc1_dev = {
.name = "au1xxx-mmc",
.id = 1,
.dev = {
.dma_mask = &au1xxx_all_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &db1100_mmc_platdata[1],
},
.num_resources = ARRAY_SIZE(au1100_mmc1_res),
.resource = au1100_mmc1_res,
};
#endif /* CONFIG_MMC_AU1X */
/******************************************************************************/
static const struct software_node db1100_alchemy2_gpiochip = {
.name = "alchemy-gpio2",
};
static const struct property_entry db1100_ads7846_properties[] = {
PROPERTY_ENTRY_U16("ti,vref_min", 3300),
PROPERTY_ENTRY_GPIO("pendown-gpios",
&db1100_alchemy2_gpiochip, 21, GPIO_ACTIVE_LOW),
{ }
};
static const struct software_node db1100_ads7846_swnode = {
.name = "ads7846",
.properties = db1100_ads7846_properties,
};
static struct spi_board_info db1100_spi_info[] __initdata = {
[0] = {
.modalias = "ads7846",
.max_speed_hz = 3250000,
.bus_num = 0,
.chip_select = 0,
.mode = 0,
.irq = AU1100_GPIO21_INT,
.swnode = &db1100_ads7846_swnode,
},
};
static const struct spi_gpio_platform_data db1100_spictl_pd __initconst = {
.num_chipselect = 1,
};
/*
* Alchemy GPIO 2 has its base at 200 so the GPIO lines
* 207 thru 210 are GPIOs at offset 7 thru 10 at this chip.
*/
static const struct property_entry db1100_spi_dev_properties[] __initconst = {
PROPERTY_ENTRY_GPIO("miso-gpios",
&db1100_alchemy2_gpiochip, 7, GPIO_ACTIVE_HIGH),
PROPERTY_ENTRY_GPIO("mosi-gpios",
&db1100_alchemy2_gpiochip, 8, GPIO_ACTIVE_HIGH),
PROPERTY_ENTRY_GPIO("sck-gpios",
&db1100_alchemy2_gpiochip, 9, GPIO_ACTIVE_HIGH),
PROPERTY_ENTRY_GPIO("cs-gpios",
&db1100_alchemy2_gpiochip, 10, GPIO_ACTIVE_HIGH),
{ }
};
static const struct platform_device_info db1100_spi_dev_info __initconst = {
.name = "spi_gpio",
.id = 0,
.data = &db1100_spictl_pd,
.size_data = sizeof(db1100_spictl_pd),
.dma_mask = DMA_BIT_MASK(32),
.properties = db1100_spi_dev_properties,
};
static struct platform_device *db1x00_devs[] = {
&db1x00_codec_dev,
&alchemy_ac97c_dma_dev,
&alchemy_ac97c_dev,
&db1x00_audio_dev,
};
static struct platform_device *db1100_devs[] = {
&au1100_lcd_device,
#ifdef CONFIG_MMC_AU1X
&db1100_mmc0_dev,
&db1100_mmc1_dev,
#endif
};
int __init db1000_dev_setup(void)
{
int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
int c0, c1, d0, d1, s0, s1, flashsize = 32, twosocks = 1;
int err;
unsigned long pfc;
struct clk *c, *p;
struct platform_device *spi_dev;
if (board == BCSR_WHOAMI_DB1500) {
c0 = AU1500_GPIO2_INT;
c1 = AU1500_GPIO5_INT;
d0 = 0; /* GPIO number, NOT irq! */
d1 = 3; /* GPIO number, NOT irq! */
s0 = AU1500_GPIO1_INT;
s1 = AU1500_GPIO4_INT;
} else if (board == BCSR_WHOAMI_DB1100) {
c0 = AU1100_GPIO2_INT;
c1 = AU1100_GPIO5_INT;
d0 = 0; /* GPIO number, NOT irq! */
d1 = 3; /* GPIO number, NOT irq! */
s0 = AU1100_GPIO1_INT;
s1 = AU1100_GPIO4_INT;
gpio_request(19, "sd0_cd");
gpio_request(20, "sd1_cd");
gpio_direction_input(19); /* sd0 cd# */
gpio_direction_input(20); /* sd1 cd# */
/* spi_gpio on SSI0 pins */
pfc = alchemy_rdsys(AU1000_SYS_PINFUNC);
pfc |= (1 << 0); /* SSI0 pins as GPIOs */
alchemy_wrsys(pfc, AU1000_SYS_PINFUNC);
software_node_register(&db1100_alchemy2_gpiochip);
spi_register_board_info(db1100_spi_info,
ARRAY_SIZE(db1100_spi_info));
/* link LCD clock to AUXPLL */
p = clk_get(NULL, "auxpll_clk");
c = clk_get(NULL, "lcd_intclk");
if (!IS_ERR(c) && !IS_ERR(p)) {
clk_set_parent(c, p);
clk_set_rate(c, clk_get_rate(p));
}
if (!IS_ERR(c))
clk_put(c);
if (!IS_ERR(p))
clk_put(p);
platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs));
spi_dev = platform_device_register_full(&db1100_spi_dev_info);
err = PTR_ERR_OR_ZERO(spi_dev);
if (err)
pr_err("failed to register SPI controller: %d\n", err);
} else if (board == BCSR_WHOAMI_DB1000) {
c0 = AU1000_GPIO2_INT;
c1 = AU1000_GPIO5_INT;
d0 = 0; /* GPIO number, NOT irq! */
d1 = 3; /* GPIO number, NOT irq! */
s0 = AU1000_GPIO1_INT;
s1 = AU1000_GPIO4_INT;
} else if ((board == BCSR_WHOAMI_PB1500) ||
(board == BCSR_WHOAMI_PB1500R2)) {
c0 = AU1500_GPIO203_INT;
d0 = 1; /* GPIO number, NOT irq! */
s0 = AU1500_GPIO202_INT;
twosocks = 0;
flashsize = 64;
/* RTC and daughtercard irqs */
irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_LOW);
irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW);
/* EPSON S1D13806 0x1b000000
* SRAM 1MB/2MB 0x1a000000
* DS1693 RTC 0x0c000000
*/
} else if (board == BCSR_WHOAMI_PB1100) {
c0 = AU1100_GPIO11_INT;
d0 = 9; /* GPIO number, NOT irq! */
s0 = AU1100_GPIO10_INT;
twosocks = 0;
flashsize = 64;
/* pendown, rtc, daughtercard irqs */
irq_set_irq_type(AU1100_GPIO8_INT, IRQ_TYPE_LEVEL_LOW);
irq_set_irq_type(AU1100_GPIO12_INT, IRQ_TYPE_LEVEL_LOW);
irq_set_irq_type(AU1100_GPIO13_INT, IRQ_TYPE_LEVEL_LOW);
/* EPSON S1D13806 0x1b000000
* SRAM 1MB/2MB 0x1a000000
* DiskOnChip 0x0d000000
* DS1693 RTC 0x0c000000
*/
platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs));
} else
return 0; /* unknown board, no further dev setup to do */
irq_set_irq_type(c0, IRQ_TYPE_LEVEL_LOW);
irq_set_irq_type(s0, IRQ_TYPE_LEVEL_LOW);
db1x_register_pcmcia_socket(
AU1000_PCMCIA_ATTR_PHYS_ADDR,
AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
AU1000_PCMCIA_MEM_PHYS_ADDR,
AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
AU1000_PCMCIA_IO_PHYS_ADDR,
AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
c0, d0, /*s0*/0, 0, 0);
if (twosocks) {
irq_set_irq_type(c1, IRQ_TYPE_LEVEL_LOW);
irq_set_irq_type(s1, IRQ_TYPE_LEVEL_LOW);
db1x_register_pcmcia_socket(
AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000,
AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1,
AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000,
AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1,
c1, d1, /*s1*/0, 0, 1);
}
platform_add_devices(db1x00_devs, ARRAY_SIZE(db1x00_devs));
db1x_register_norflash(flashsize << 20, 4 /* 32bit */, F_SWAPPED);
return 0;
}
Reference in New Issue View Git Blame Copy Permalink