mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2025-08-31 19:18:55 +00:00
724ba67515
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
406 lines
9.0 KiB
Plaintext
406 lines
9.0 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
#include "pxa3xx.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
/* Will be overridden by bootloader */
|
|
hw-revision = <0>;
|
|
|
|
chosen {
|
|
bootargs = "root=ubi0:RootFS rootfstype=ubifs rw ubi.mtd=3";
|
|
stdout-path = &ffuart;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0xa0000000 0x8000000>; /* 128 MB */
|
|
};
|
|
|
|
reg_3v3: regulator-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3v3-fixed-supply";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_1v8: regulator-1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "1v8-fixed-supply";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_va_5v0: regulator-va-5v0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "va-5v0-fixed-supply";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio 124 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
ssp_dai0: ssp-dai0 {
|
|
compatible = "mrvl,pxa-ssp-dai";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ssp0_dai_pins>;
|
|
port = <&ssp1>;
|
|
#sound-dai-cells = <0>;
|
|
dmas = <&pdma 13 3
|
|
&pdma 14 3>;
|
|
dma-names = "rx", "tx";
|
|
clock-names = "extclk";
|
|
};
|
|
|
|
ssp_dai1: ssp-dai1 {
|
|
compatible = "mrvl,pxa-ssp-dai";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ssp1_dai_pins>;
|
|
port = <&ssp2>;
|
|
#sound-dai-cells = <0>;
|
|
dmas = <&pdma 15 3
|
|
&pdma 16 3>;
|
|
dma-names = "rx", "tx";
|
|
clock-names = "extclk";
|
|
};
|
|
|
|
spi: spi {
|
|
compatible = "spi-gpio";
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi_pins>;
|
|
gpio-sck = <&gpio 95 GPIO_ACTIVE_HIGH>;
|
|
gpio-miso = <&gpio 98 GPIO_ACTIVE_HIGH>;
|
|
gpio-mosi = <&gpio 97 GPIO_ACTIVE_HIGH>;
|
|
cs-gpios = <
|
|
&gpio 34 GPIO_ACTIVE_HIGH
|
|
&gpio 125 GPIO_ACTIVE_HIGH
|
|
&gpio 96 GPIO_ACTIVE_HIGH
|
|
>;
|
|
num-chipselects = <3>;
|
|
|
|
dac: dac@2 {
|
|
compatible = "ti,dac7512";
|
|
reg = <2>;
|
|
spi-max-frequency = <1000000>;
|
|
vcc-supply = <®_3v3>;
|
|
};
|
|
};
|
|
|
|
keys: gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio_keys_pins>;
|
|
|
|
on-off {
|
|
label = "on_off button";
|
|
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_F6>;
|
|
};
|
|
|
|
rescue-boot {
|
|
label = "rescue boot button";
|
|
gpios = <&gpio 115 GPIO_ACTIVE_HIGH>;
|
|
linux,code = <KEY_F4>;
|
|
};
|
|
|
|
setup {
|
|
label = "setup";
|
|
gpios = <&gpio 119 GPIO_ACTIVE_HIGH>;
|
|
linux,code = <KEY_F3>;
|
|
};
|
|
};
|
|
|
|
rotary: rotary-encoder {
|
|
compatible = "rotary-encoder";
|
|
gpios = <
|
|
&gpio 19 GPIO_ACTIVE_LOW
|
|
&gpio 20 GPIO_ACTIVE_HIGH
|
|
>;
|
|
linux,axis = <REL_X>;
|
|
rotary-encoder,relative-axis;
|
|
};
|
|
|
|
leds: leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&led_pins_a &led_pins_b>;
|
|
|
|
left {
|
|
label = "raumfeld:1";
|
|
gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
right {
|
|
label = "raumfeld:2";
|
|
gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
poweroff {
|
|
compatible = "gpio-poweroff";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&poweroff_pins>;
|
|
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
mmc0_pwrseq: mmc-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc0_pwrseq_pins>;
|
|
reset-gpios = <
|
|
&gpio 113 GPIO_ACTIVE_LOW /* W2W_RESET */
|
|
&gpio 114 GPIO_ACTIVE_LOW /* W2W_PDN */
|
|
>;
|
|
};
|
|
|
|
ethernet: ethernet@10000000 {
|
|
compatible = "smsc,lan9115";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&smsc_pins &smsc_bus_pins>;
|
|
reg = <0x10000000 0x100000>;
|
|
phy-mode = "mii";
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <40 IRQ_TYPE_EDGE_FALLING>;
|
|
vdd33a-supply = <®_3v3>;
|
|
vddvario-supply = <®_1v8>;
|
|
reset-gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
|
|
reg-io-width = <4>;
|
|
smsc,save-mac-address;
|
|
smsc,irq-push-pull;
|
|
};
|
|
};
|
|
|
|
&ffuart {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwri2c {
|
|
status = "okay";
|
|
|
|
max8660: regulator@34 {
|
|
compatible = "maxim,max8660";
|
|
reg = <0x34>;
|
|
|
|
regulators {
|
|
regulator-v3 {
|
|
regulator-compatible = "V3(DCDC)";
|
|
regulator-min-microvolt = <725000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
regulator-v4 {
|
|
regulator-compatible = "V4(DCDC)";
|
|
regulator-min-microvolt = <725000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
regulator-v5 {
|
|
regulator-compatible = "V5(LDO)";
|
|
regulator-min-microvolt = <1700000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
};
|
|
|
|
reg_vcc_sdio: regulator-v6 {
|
|
regulator-compatible = "V6(LDO)";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
regulator-v7 {
|
|
regulator-compatible = "V7(LDO)";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pxai2c1 {
|
|
status = "okay";
|
|
mrvl,i2c-fast-mode;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pxai2c1_pins>;
|
|
};
|
|
|
|
&ssp1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ssp2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&nand_controller {
|
|
status = "okay";
|
|
|
|
nand@0 {
|
|
reg = <0>;
|
|
nand-rb = <0>;
|
|
nand-ecc-mode = "hw";
|
|
marvell,nand-keep-config;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "Bootloader";
|
|
reg = <0x0000000 0xa0000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@a0000 {
|
|
label = "BootloaderEnvironment";
|
|
reg = <0x0a0000 0x20000>;
|
|
};
|
|
|
|
partition@c0000 {
|
|
label = "BootloaderSplashScreen";
|
|
reg = <0x0c0000 0x60000>;
|
|
};
|
|
|
|
partition@120000 {
|
|
label = "UBI";
|
|
reg = <0x120000 0x7ee0000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb0 {
|
|
status = "okay";
|
|
marvell,enable-port1;
|
|
marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pxa3xx_ohci_pins>;
|
|
};
|
|
|
|
&mmc0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc0_pins>;
|
|
pxa-mmc,detect-delay-ms = <200>;
|
|
vmmc-supply = <®_vcc_sdio>;
|
|
mmc-pwrseq = <&mmc0_pwrseq>;
|
|
non-removable;
|
|
bus-width = <4>;
|
|
};
|
|
|
|
&pinctrl {
|
|
poweroff_pins: poweroff-pins {
|
|
pinctrl-single,pins = <MFP_PIN_PXA300(16) MFP_AF0>;
|
|
pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
|
|
};
|
|
|
|
led_pins_a: led-pins-a {
|
|
pinctrl-single,pins = <MFP_PIN_PXA300(35) MFP_AF0>;
|
|
pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
|
|
};
|
|
|
|
led_pins_b: led-pins-b {
|
|
pinctrl-single,pins = <MFP_PIN_PXA300(36) MFP_AF0>;
|
|
pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH);
|
|
};
|
|
|
|
pxai2c1_pins: pxai2c1-pins {
|
|
pinctrl-single,pins = <
|
|
MFP_PIN_PXA300(21) MFP_AF1 /* I2C_SCL */
|
|
MFP_PIN_PXA300(22) MFP_AF1 /* I2C_SDA */
|
|
>;
|
|
pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
|
|
};
|
|
|
|
gpio_keys_pins: gpio-keys-pins {
|
|
pinctrl-single,pins = <
|
|
MFP_PIN_PXA300(14) MFP_AF0 /* on-off */
|
|
MFP_PIN_PXA300(115) MFP_AF0 /* rescue boot */
|
|
MFP_PIN_PXA300(119) MFP_AF0 /* setup */
|
|
>;
|
|
pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
|
|
};
|
|
|
|
spi_pins: spi-pins {
|
|
pinctrl-single,pins = <
|
|
MFP_PIN_PXA300(95) MFP_AF0 /* SCK */
|
|
MFP_PIN_PXA300(97) MFP_AF0 /* MOSI */
|
|
MFP_PIN_PXA300(98) MFP_AF0 /* MISO */
|
|
MFP_PIN_PXA300(34) MFP_AF0 /* CS#0 */
|
|
MFP_PIN_PXA300(125) MFP_AF0 /* CS#1 */
|
|
MFP_PIN_PXA300(96) MFP_AF0 /* CS#2 */
|
|
>;
|
|
pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
|
|
};
|
|
|
|
pxa3xx_ohci_pins: pxa3xx-ohci-pins {
|
|
pinctrl-single,pins = <
|
|
MFP_PIN_PXA300_2(0) MFP_AF1 /* USBHPEN */
|
|
MFP_PIN_PXA300_2(1) MFP_AF1 /* USBHPWR */
|
|
>;
|
|
pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
|
|
};
|
|
|
|
smsc_pins: smsc-pins {
|
|
pinctrl-single,pins = <
|
|
MFP_PIN_PXA300(39) MFP_AF0 /* RESET */
|
|
MFP_PIN_PXA300(40) MFP_AF0 /* IRQ */
|
|
>;
|
|
pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
|
|
};
|
|
|
|
smsc_bus_pins: smsc-bus-pins {
|
|
pinctrl-single,pins = <
|
|
MFP_PIN_PXA300(1) MFP_AF1 /* nCS2 */
|
|
>;
|
|
pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
|
|
};
|
|
|
|
mmc0_pins: mmc0-pins {
|
|
pinctrl-single,pins = <
|
|
MFP_PIN_PXA300(3) MFP_AF4 /* MMC1_DAT0 */
|
|
MFP_PIN_PXA300(4) MFP_AF4 /* MMC1_DAT1 */
|
|
MFP_PIN_PXA300(5) MFP_AF4 /* MMC1_DAT2 */
|
|
MFP_PIN_PXA300(6) MFP_AF4 /* MMC1_DAT3 */
|
|
MFP_PIN_PXA300(7) MFP_AF4 /* MMC1_CLK */
|
|
MFP_PIN_PXA300(8) MFP_AF4 /* MMC1_CMD */
|
|
>;
|
|
pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH);
|
|
};
|
|
|
|
mmc0_pwrseq_pins: mmc0-pwrseq-pins {
|
|
pinctrl-single,pins = <
|
|
MFP_PIN_PXA300(113) MFP_AF0 /* W2W_RESET */
|
|
MFP_PIN_PXA300(114) MFP_AF0 /* W2W_PDN */
|
|
>;
|
|
pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
|
|
};
|
|
|
|
ssp0_dai_pins: ssp0-dai-pins {
|
|
pinctrl-single,pins = <
|
|
MFP_PIN_PXA300(85) MFP_AF1 /* SSP1_SCLK */
|
|
MFP_PIN_PXA300(86) MFP_AF1 /* SSP1_FRM */
|
|
MFP_PIN_PXA300(87) MFP_AF1 /* SSP1_TXD */
|
|
MFP_PIN_PXA300(88) MFP_AF1 /* SSP1_RXD */
|
|
MFP_PIN_PXA300(89) MFP_AF1 /* SSP1_EXTCLK */
|
|
MFP_PIN_PXA300(90) MFP_AF1 /* SSP1_SYSCLK */
|
|
>;
|
|
pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
|
|
};
|
|
|
|
ssp1_dai_pins: ssp1-dai-pins {
|
|
pinctrl-single,pins = <
|
|
MFP_PIN_PXA300(25) MFP_AF2 /* SSP2_SCLK */
|
|
MFP_PIN_PXA300(26) MFP_AF2 /* SSP2_FRM */
|
|
MFP_PIN_PXA300(27) MFP_AF2 /* SSP2_TXD */
|
|
MFP_PIN_PXA300(29) MFP_AF2 /* SSP2_EXTCLK */
|
|
>;
|
|
pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
|
|
};
|
|
};
|