linux/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
Arınç ÜNAL 4dd01a3721 ARM: dts: BCM5301X: Conform to DTS Coding Style on ASUS RT-AC3100 & AC88U
Reorder the nodes and properties to conform to the Devicetree Sources (DTS)
Coding Style.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240423-for-soc-asus-rt-ac3200-ac5300-v3-5-23d33cfafe7a@arinc9.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-04-24 10:59:43 -07:00

128 lines
1.9 KiB
Plaintext
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Author: Arınç ÜNAL <arinc.unal@arinc9.com>
*/
/dts-v1/;
#include "bcm47094-asus-rt-ac3100.dtsi"
/ {
compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708";
model = "ASUS RT-AC88U";
nvram@1c080000 {
et1macaddr: et1macaddr {
#nvmem-cell-cells = <1>;
};
};
switch {
compatible = "realtek,rtl8365mb";
mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
realtek,disable-leds;
dsa,member = <1 0>;
mdio {
compatible = "realtek,smi-mdio";
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
reg = <0>;
};
ethphy1: ethernet-phy@1 {
reg = <1>;
};
ethphy2: ethernet-phy@2 {
reg = <2>;
};
ethphy3: ethernet-phy@3 {
reg = <3>;
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan5";
phy-handle = <&ethphy0>;
};
port@1 {
reg = <1>;
label = "lan6";
phy-handle = <&ethphy1>;
};
port@2 {
reg = <2>;
label = "lan7";
phy-handle = <&ethphy2>;
};
port@3 {
reg = <3>;
label = "lan8";
phy-handle = <&ethphy3>;
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&sw0_p5>;
phy-mode = "rgmii";
tx-internal-delay-ps = <2000>;
rx-internal-delay-ps = <2100>;
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
};
};
};
&gmac0 {
status = "disabled";
};
&gmac1 {
nvmem-cells = <&et1macaddr 0>;
nvmem-cell-names = "mac-address";
};
&gmac2 {
nvmem-cells = <&et1macaddr 1>;
nvmem-cell-names = "mac-address";
};
&srab {
dsa,member = <0 0>;
ports {
sw0_p5: port@5 {
/delete-property/ethernet;
label = "extsw";
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
};
};