linux/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml
Sebastian Reichel 719e366a66 dt-bindings: bus: imx-weim: convert to YAML
Convert the i.MX  Wireless External Interface Module binding to YAML.

Signed-off-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20240224213240.1854709-3-sre@kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-26 08:25:59 +01:00

32 lines
962 B
YAML

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: i.MX WEIM Bus Peripheral Nodes
maintainers:
- Shawn Guo <shawnguo@kernel.org>
- Sascha Hauer <s.hauer@pengutronix.de>
description:
This binding is meant for the child nodes of the WEIM node. The node
represents any device connected to the WEIM bus. It may be a Flash chip,
RAM chip or Ethernet controller, etc. These properties are meant for
configuring the WEIM settings/timings and will accompany the bindings
supported by the respective device.
properties:
reg: true
fsl,weim-cs-timing:
$ref: /schemas/types.yaml#/definitions/uint32-array
description:
Timing values for the child node.
minItems: 2
maxItems: 6
# the WEIM child will have its own native properties
additionalProperties: true