Commit Graph

64 Commits

Author SHA1 Message Date
Florian Westphal
3c3ab65f00 selftests: net: Enable legacy netfilter legacy options.
Some specified options rely on NETFILTER_XTABLES_LEGACY to be enabled.
IP_NF_TARGET_TTL for instance depends on IP_NF_MANGLE which in turn
depends on IP_NF_IPTABLES_LEGACY -> NETFILTER_XTABLES_LEGACY.

Enable relevant iptables config options explicitly, this is needed
to avoid breakage when symbols related to iptables-legacy
will depend on NETFILTER_LEGACY resp. IP_TABLES_LEGACY.

This also means that the classic tables (Kernel modules) will
not be enabled by default, so enable them too.

Signed-off-by: Florian Westphal <fw@strlen.de>
[bigeasy: Split out the config bits from the main patch]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-07-25 18:38:55 +02:00
Jason A. Donenfeld
ca8bf8f383 wireguard: selftests: specify -std=gnu17 for bash
GCC 15 defaults to C23, which bash can't compile under, so specify gnu17
explicitly.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250521212707.1767879-6-Jason@zx2c4.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-27 09:06:19 +02:00
Jordan Rife
ba3d7b93db wireguard: allowedips: add WGALLOWEDIP_F_REMOVE_ME flag
The current netlink API for WireGuard does not directly support removal
of allowed ips from a peer. A user can remove an allowed ip from a peer
in one of two ways:

1. By using the WGPEER_F_REPLACE_ALLOWEDIPS flag and providing a new
   list of allowed ips which omits the allowed ip that is to be removed.
2. By reassigning an allowed ip to a "dummy" peer then removing that
   peer with WGPEER_F_REMOVE_ME.

With the first approach, the driver completely rebuilds the allowed ip
list for a peer. If my current configuration is such that a peer has
allowed ips 192.168.0.2 and 192.168.0.3 and I want to remove 192.168.0.2
the actual transition looks like this.

[192.168.0.2, 192.168.0.3] <-- Initial state
[]                         <-- Step 1: Allowed ips removed for peer
[192.168.0.3]              <-- Step 2: Allowed ips added back for peer

This is true even if the allowed ip list is small and the update does
not need to be batched into multiple WG_CMD_SET_DEVICE requests, as the
removal and subsequent addition of ips is non-atomic within a single
request. Consequently, wg_allowedips_lookup_dst and
wg_allowedips_lookup_src may return NULL while reconfiguring a peer even
for packets bound for ips a user did not intend to remove leading to
unintended interruptions in connectivity. This presents in userspace as
failed calls to sendto and sendmsg for UDP sockets. In my case, I ran
netperf while repeatedly reconfiguring the allowed ips for a peer with
wg.

/usr/local/bin/netperf -H 10.102.73.72 -l 10m -t UDP_STREAM -- -R 1 -m 1024
send_data: data send error: No route to host (errno 113)
netperf: send_omni: send_data failed: No route to host

While this may not be of particular concern for environments where peers
and allowed ips are mostly static, systems like Cilium manage peers and
allowed ips in a dynamic environment where peers (i.e. Kubernetes nodes)
and allowed ips (i.e. pods running on those nodes) can frequently
change making WGPEER_F_REPLACE_ALLOWEDIPS problematic.

The second approach avoids any possible connectivity interruptions
but is hacky and less direct, requiring the creation of a temporary
peer just to dispose of an allowed ip.

Introduce a new flag called WGALLOWEDIP_F_REMOVE_ME which in the same
way that WGPEER_F_REMOVE_ME allows a user to remove a single peer from
a WireGuard device's configuration allows a user to remove an ip from a
peer's set of allowed ips. This enables incremental updates to a
device's configuration without any connectivity blips or messy
workarounds.

A corresponding patch for wg extends the existing `wg set` interface to
leverage this feature.

$ wg set wg0 peer <PUBKEY> allowed-ips +192.168.88.0/24,-192.168.0.1/32

When '+' or '-' is prepended to any ip in the list, wg clears
WGPEER_F_REPLACE_ALLOWEDIPS and sets the WGALLOWEDIP_F_REMOVE_ME flag on
any ip prefixed with '-'.

Signed-off-by: Jordan Rife <jordan@jrife.io>
[Jason: minor style nits, fixes to selftest, bump of wireguard-tools version]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250521212707.1767879-5-Jason@zx2c4.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-27 09:06:19 +02:00
WangYuli
e74e9ee2c8 wireguard: selftests: cleanup CONFIG_UBSAN_SANITIZE_ALL
Commit 918327e9b7 ("ubsan: Remove CONFIG_UBSAN_SANITIZE_ALL")
removed the CONFIG_UBSAN_SANITIZE_ALL configuration option.
Eliminate invalid configurations to improve code readability.

Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250521212707.1767879-2-Jason@zx2c4.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-05-27 09:06:19 +02:00
Ingo Molnar
14d281db78 sched/debug: Remove CONFIG_SCHED_DEBUG from self-test config files
We leave most of the defconfigs alone (there's over 70 of them),
but let's remove CONFIG_SCHED_DEBUG from the scheduler self-test
Kconfig files.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/Z9szt3MpQmQ56TRd@gmail.com
2025-03-19 22:23:24 +01:00
Linus Torvalds
fcc79e1714 Networking changes for 6.13.
The most significant set of changes is the per netns RTNL. The new
 behavior is disabled by default, regression risk should be contained.
 
 Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
 default value from PTP_1588_CLOCK_KVM, as the first is intended to be
 a more reliable replacement for the latter.
 
 Core
 ----
 
  - Started a very large, in-progress, effort to make the RTNL lock
    scope per network-namespace, thus reducing the lock contention
    significantly in the containerized use-case, comprising:
    - RCU-ified some relevant slices of the FIB control path
    - introduce basic per netns locking helpers
    - namespacified the IPv4 address hash table
    - remove rtnl_register{,_module}() in favour of rtnl_register_many()
    - refactor rtnl_{new,del,set}link() moving as much validation as
      possible out of RTNL lock
    - convert all phonet doit() and dumpit() handlers to RCU
    - convert IPv4 addresses manipulation to per-netns RTNL
    - convert virtual interface creation to per-netns RTNL
    the per-netns lock infra is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL
    knob, disabled by default ad interim.
 
  - Introduce NAPI suspension, to efficiently switching between busy
    polling (NAPI processing suspended) and normal processing.
 
  - Migrate the IPv4 routing input, output and control path from direct
    ToS usage to DSCP macros. This is a work in progress to make ECN
    handling consistent and reliable.
 
  - Add drop reasons support to the IPv4 rotue input path, allowing
    better introspection in case of packets drop.
 
  - Make FIB seqnum lockless, dropping RTNL protection for read
    access.
 
  - Make inet{,v6} addresses hashing less predicable.
 
  - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
    and timestamps
 
 Things we sprinkled into general kernel code
 --------------------------------------------
 
  - Add small file operations for debugfs, to reduce the struct ops size.
 
  - Refactoring and optimization for the implementation of page_frag API,
    This is a preparatory work to consolidate the page_frag
    implementation.
 
 Netfilter
 ---------
 
  - Optimize set element transactions to reduce memory consumption
 
  - Extended netlink error reporting for attribute parser failure.
 
  - Make legacy xtables configs user selectable, giving users
    the option to configure iptables without enabling any other config.
 
  - Address a lot of false-positive RCU issues, pointed by recent
    CI improvements.
 
 BPF
 ---
 
  - Put xsk sockets on a struct diet and add various cleanups. Overall,
    this helps to bump performance by 12% for some workloads.
 
  - Extend BPF selftests to increase coverage of XDP features in
    combination with BPF cpumap.
 
  - Optimize and homogenize bpf_csum_diff helper for all archs and also
    add a batch of new BPF selftests for it.
 
  - Extend netkit with an option to delegate skb->{mark,priority}
    scrubbing to its BPF program.
 
  - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
    programs.
 
 Protocols
 ---------
 
  - Introduces 4-tuple hash for connected udp sockets, speeding-up
    significantly connected sockets lookup.
 
  - Add a fastpath for some TCP timers that usually expires after close,
    the socket lock contention.
 
  - Add inbound and outbound xfrm state caches to speed up state lookups.
 
  - Avoid sending MPTCP advertisements on stale subflows, reducing
    risks on loosing them.
 
  - Make neighbours table flushing more scalable, maintaining per device
    neigh lists.
 
 Driver API
 ----------
 
  - Introduce a unified interface to configure transmission H/W shaping,
    and expose it to user-space via generic-netlink.
 
  - Add support for per-NAPI config via netlink. This makes napi
    configuration persistent across queues removal and re-creation.
    Requires driver updates, currently supported drivers are:
    nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
 
  - Add ethtool support for writing SFP / PHY firmware blocks.
 
  - Track RSS context allocation from ethtool core.
 
  - Implement support for mirroring to DSA CPU port, via TC mirror
    offload.
 
  - Consolidate FDB updates notification, to avoid duplicates on
    device-specific entries.
 
  - Expose DPLL clock quality level to the user-space.
 
  - Support master-slave PHY config via device tree.
 
 Tests and tooling
 -----------------
 
  - forwarding: introduce deferred commands, to simplify
    the cleanup phase
 
 Drivers
 -------
 
  - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
    Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
    IRQs and queues to NAPI IDs, allowing busy polling and better
    introspection.
 
  - Ethernet high-speed NICs:
    - nVidia/Mellanox:
      - mlx5:
        - a large refactor to implement support for cross E-Switch
          scheduling
        - refactor H/W conter management to let it scale better
        - H/W GRO cleanups
    - Intel (100G, ice)::
      - adds support for ethtool reset
      - implement support for per TX queue H/W shaping
    - AMD/Solarflare:
      - implement per device queue stats support
    - Broadcom (bnxt):
      - improve wildcard l4proto on IPv4/IPv6 ntuple rules
    - Marvell Octeon:
      - Adds representor support for each Resource Virtualization Unit
        (RVU) device.
    - Hisilicon:
      - adds support for the BMC Gigabit Ethernet
    - IBM (EMAC):
      - driver cleanup and modernization
    - Cisco (VIC):
      - raise the queues number limit to 256
 
  - Ethernet virtual:
    - Google vNIC:
      - implements page pool support
    - macsec:
      - inherit lower device's features and TSO limits when offloading
    - virtio_net:
      - enable premapped mode by default
      - support for XDP socket(AF_XDP) zerocopy TX
    - wireguard:
      - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
        packets.
 
  - Ethernet NICs embedded and virtual:
    - Broadcom ASP:
      - enable software timestamping
    - Freescale:
      - add enetc4 PF driver
    - MediaTek: Airoha SoC:
      - implement BQL support
    - RealTek r8169:
      - enable TSO by default on r8168/r8125
      - implement extended ethtool stats
    - Renesas AVB:
      - enable TX checksum offload
    - Synopsys (stmmac):
      - support header splitting for vlan tagged packets
      - move common code for DWMAC4 and DWXGMAC into a separate FPE
        module.
      - Add the dwmac driver support for T-HEAD TH1520 SoC
    - Synopsys (xpcs):
      - driver refactor and cleanup
    - TI:
      - icssg_prueth: add VLAN offload support
    - Xilinx emaclite:
      - adds clock support
 
  - Ethernet switches:
    - Microchip:
      - implement support for the lan969x Ethernet switch family
      - add LAN9646 switch support to KSZ DSA driver
 
  - Ethernet PHYs:
    - Marvel: 88q2x: enable auto negotiation
    - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
 
  - PTP:
    - Add support for the Amazon virtual clock device
    - Add PtP driver for s390 clocks
 
  - WiFi:
    - mac80211
      - EHT 1024 aggregation size for transmissions
      - new operation to indicate that a new interface is to be added
      - support radio separation of multi-band devices
      - move wireless extension spy implementation to libiw
    - Broadcom:
      - brcmfmac: optional LPO clock support
    - Microchip:
      - add support for Atmel WILC3000
    - Qualcomm (ath12k):
      - firmware coredump collection support
      - add debugfs support for a multitude of statistics
    - Qualcomm (ath5k):
      -  Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
    - Realtek:
      - rtw88: 8821au and 8812au USB adapters support
      - rtw89: add thermal protection
      - rtw89: fine tune BT-coexsitence to improve user experience
      - rtw89: firmware secure boot for WiFi 6 chip
 
  - Bluetooth
      - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
        0x13d3:0x3623
      - add Realtek RTL8852BE support for id Foxconn 0xe123
      - add MediaTek MT7920 support for wireless module ids
      - btintel_pcie: add handshake between driver and firmware
      - btintel_pcie: add recovery mechanism
      - btnxpuart: add GPIO support to power save feature
 
 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmc8sukSHHBhYmVuaUBy
 ZWRoYXQuY29tAAoJECkkeY3MjxOkLEYQAIMM6Qjh0bh3Byr3gOS1xZzXG+APLjP4
 9Jr0p3i+X53i90jvVqzeVO5FTc95MVHSKZ3kvPkDMXSLUaEJxocNHCI5Dzl/2/qL
 wWdpUB6/ou+jKB4Bn6Z8OvVODT7qrr0tVa9M2/fuKWrIsOU/ntIhG8EhnGddk5U/
 vKPSf5PUIb81uNRnF58VusY3wrT1dEoh9VfJYxL+ST+inPxjEAMy6Y+lmlsjGaSX
 jrS+Pp9KYiUwl3Qt0AQs+cG4OHkJdjbnChrfosWwpkiyddO8klVq06+wX/TiSzfF
 b9VZtBfy/GZs3lkE1mQkcILdtX5pP3YHQdpsuxFfVI0JHVszx2ck7WdoRux/8F0v
 kKZsYcO7bH9I1wMFP66Ff9hIbdEQaeucK+KdDkXyPNMfP91Vzmfjii8IBxOC36Ie
 BbOeFUrXyTxxJ2u0vf/X9JtIq8bcrkNrSd1n1jlGPMqG3FVzsY95+Oi4qfsyeUbl
 lS1PlVTqPMPFdX54HnxM3y2rJjhd7iXhkvmtuXNjRFThXlOiK3maAPWlM1aZ3b8u
 Vjs4JFUsW0tleZG+RzANjsGjXbf7AiPUGLZt+acem0K+fcjG4i5aGIAJrxwa/ORx
 eG74IZRt5cOI371W7gNLGHjwnuge8tFPgOWcRP2eozNm7jvMYALBejYS7eWUTvaf
 THcvVM+bupEZ
 =GzPr
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
 "The most significant set of changes is the per netns RTNL. The new
  behavior is disabled by default, regression risk should be contained.

  Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
  default value from PTP_1588_CLOCK_KVM, as the first is intended to be
  a more reliable replacement for the latter.

  Core:

   - Started a very large, in-progress, effort to make the RTNL lock
     scope per network-namespace, thus reducing the lock contention
     significantly in the containerized use-case, comprising:
       - RCU-ified some relevant slices of the FIB control path
       - introduce basic per netns locking helpers
       - namespacified the IPv4 address hash table
       - remove rtnl_register{,_module}() in favour of
         rtnl_register_many()
       - refactor rtnl_{new,del,set}link() moving as much validation as
         possible out of RTNL lock
       - convert all phonet doit() and dumpit() handlers to RCU
       - convert IPv4 addresses manipulation to per-netns RTNL
       - convert virtual interface creation to per-netns RTNL
     the per-netns lock infrastructure is guarded by the
     CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.

   - Introduce NAPI suspension, to efficiently switching between busy
     polling (NAPI processing suspended) and normal processing.

   - Migrate the IPv4 routing input, output and control path from direct
     ToS usage to DSCP macros. This is a work in progress to make ECN
     handling consistent and reliable.

   - Add drop reasons support to the IPv4 rotue input path, allowing
     better introspection in case of packets drop.

   - Make FIB seqnum lockless, dropping RTNL protection for read access.

   - Make inet{,v6} addresses hashing less predicable.

   - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
     and timestamps

  Things we sprinkled into general kernel code:

   - Add small file operations for debugfs, to reduce the struct ops
     size.

   - Refactoring and optimization for the implementation of page_frag
     API, This is a preparatory work to consolidate the page_frag
     implementation.

  Netfilter:

   - Optimize set element transactions to reduce memory consumption

   - Extended netlink error reporting for attribute parser failure.

   - Make legacy xtables configs user selectable, giving users the
     option to configure iptables without enabling any other config.

   - Address a lot of false-positive RCU issues, pointed by recent CI
     improvements.

  BPF:

   - Put xsk sockets on a struct diet and add various cleanups. Overall,
     this helps to bump performance by 12% for some workloads.

   - Extend BPF selftests to increase coverage of XDP features in
     combination with BPF cpumap.

   - Optimize and homogenize bpf_csum_diff helper for all archs and also
     add a batch of new BPF selftests for it.

   - Extend netkit with an option to delegate skb->{mark,priority}
     scrubbing to its BPF program.

   - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
     programs.

  Protocols:

   - Introduces 4-tuple hash for connected udp sockets, speeding-up
     significantly connected sockets lookup.

   - Add a fastpath for some TCP timers that usually expires after
     close, the socket lock contention.

   - Add inbound and outbound xfrm state caches to speed up state
     lookups.

   - Avoid sending MPTCP advertisements on stale subflows, reducing
     risks on loosing them.

   - Make neighbours table flushing more scalable, maintaining per
     device neigh lists.

  Driver API:

   - Introduce a unified interface to configure transmission H/W
     shaping, and expose it to user-space via generic-netlink.

   - Add support for per-NAPI config via netlink. This makes napi
     configuration persistent across queues removal and re-creation.
     Requires driver updates, currently supported drivers are:
     nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.

   - Add ethtool support for writing SFP / PHY firmware blocks.

   - Track RSS context allocation from ethtool core.

   - Implement support for mirroring to DSA CPU port, via TC mirror
     offload.

   - Consolidate FDB updates notification, to avoid duplicates on
     device-specific entries.

   - Expose DPLL clock quality level to the user-space.

   - Support master-slave PHY config via device tree.

  Tests and tooling:

   - forwarding: introduce deferred commands, to simplify the cleanup
     phase

  Drivers:

   - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
     Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
     IRQs and queues to NAPI IDs, allowing busy polling and better
     introspection.

   - Ethernet high-speed NICs:
      - nVidia/Mellanox:
         - mlx5:
           - a large refactor to implement support for cross E-Switch
             scheduling
           - refactor H/W conter management to let it scale better
           - H/W GRO cleanups
      - Intel (100G, ice)::
         - add support for ethtool reset
         - implement support for per TX queue H/W shaping
      - AMD/Solarflare:
         - implement per device queue stats support
      - Broadcom (bnxt):
         - improve wildcard l4proto on IPv4/IPv6 ntuple rules
      - Marvell Octeon:
         - Add representor support for each Resource Virtualization Unit
           (RVU) device.
      - Hisilicon:
         - add support for the BMC Gigabit Ethernet
      - IBM (EMAC):
         - driver cleanup and modernization
      - Cisco (VIC):
         - raise the queues number limit to 256

   - Ethernet virtual:
      - Google vNIC:
         - implement page pool support
      - macsec:
         - inherit lower device's features and TSO limits when
           offloading
      - virtio_net:
         - enable premapped mode by default
         - support for XDP socket(AF_XDP) zerocopy TX
      - wireguard:
         - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
           packets.

   - Ethernet NICs embedded and virtual:
      - Broadcom ASP:
         - enable software timestamping
      - Freescale:
         - add enetc4 PF driver
      - MediaTek: Airoha SoC:
         - implement BQL support
      - RealTek r8169:
         - enable TSO by default on r8168/r8125
         - implement extended ethtool stats
      - Renesas AVB:
         - enable TX checksum offload
      - Synopsys (stmmac):
         - support header splitting for vlan tagged packets
         - move common code for DWMAC4 and DWXGMAC into a separate FPE
           module.
         - add dwmac driver support for T-HEAD TH1520 SoC
      - Synopsys (xpcs):
         - driver refactor and cleanup
      - TI:
         - icssg_prueth: add VLAN offload support
      - Xilinx emaclite:
         - add clock support

   - Ethernet switches:
      - Microchip:
         - implement support for the lan969x Ethernet switch family
         - add LAN9646 switch support to KSZ DSA driver

   - Ethernet PHYs:
      - Marvel: 88q2x: enable auto negotiation
      - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2

   - PTP:
      - Add support for the Amazon virtual clock device
      - Add PtP driver for s390 clocks

   - WiFi:
      - mac80211
         - EHT 1024 aggregation size for transmissions
         - new operation to indicate that a new interface is to be added
         - support radio separation of multi-band devices
         - move wireless extension spy implementation to libiw
      - Broadcom:
         - brcmfmac: optional LPO clock support
      - Microchip:
         - add support for Atmel WILC3000
      - Qualcomm (ath12k):
         - firmware coredump collection support
         - add debugfs support for a multitude of statistics
      - Qualcomm (ath5k):
         -  Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
      - Realtek:
         - rtw88: 8821au and 8812au USB adapters support
         - rtw89: add thermal protection
         - rtw89: fine tune BT-coexsitence to improve user experience
         - rtw89: firmware secure boot for WiFi 6 chip

   - Bluetooth
      - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
        0x13d3:0x3623
      - add Realtek RTL8852BE support for id Foxconn 0xe123
      - add MediaTek MT7920 support for wireless module ids
      - btintel_pcie: add handshake between driver and firmware
      - btintel_pcie: add recovery mechanism
      - btnxpuart: add GPIO support to power save feature"

* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
  mm: page_frag: fix a compile error when kernel is not compiled
  Documentation: tipc: fix formatting issue in tipc.rst
  selftests: nic_performance: Add selftest for performance of NIC driver
  selftests: nic_link_layer: Add selftest case for speed and duplex states
  selftests: nic_link_layer: Add link layer selftest for NIC driver
  bnxt_en: Add FW trace coredump segments to the coredump
  bnxt_en: Add a new ethtool -W dump flag
  bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
  bnxt_en: Add functions to copy host context memory
  bnxt_en: Do not free FW log context memory
  bnxt_en: Manage the FW trace context memory
  bnxt_en: Allocate backing store memory for FW trace logs
  bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
  bnxt_en: Refactor bnxt_free_ctx_mem()
  bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
  bnxt_en: Update firmware interface spec to 1.10.3.85
  selftests/bpf: Add some tests with sockmap SK_PASS
  bpf: fix recursive lock when verdict program return SK_PASS
  wireguard: device: support big tcp GSO
  wireguard: selftests: load nf_conntrack if not present
  ...
2024-11-21 08:28:08 -08:00
Hangbin Liu
0290abc986 wireguard: selftests: load nf_conntrack if not present
Some distros may not load nf_conntrack by default, which will cause
subsequent nf_conntrack sets to fail. Load this module if it is not
already loaded.

Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
[ Jason: add [[ -e ... ]] check so this works in the qemu harness. ]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20241117212030.629159-4-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18 19:32:27 -08:00
Thomas Gleixner
d44d26987b timekeeping: Remove CONFIG_DEBUG_TIMEKEEPING
Since 135225a363 timekeeping_cycles_to_ns() handles large offsets which
would lead to 64bit multiplication overflows correctly. It's also protected
against negative motion of the clocksource unconditionally, which was
exclusive to x86 before.

timekeeping_advance() handles large offsets already correctly.

That means the value of CONFIG_DEBUG_TIMEKEEPING which analyzed these cases
is very close to zero. Remove all of it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241031120328.536010148@linutronix.de
2024-11-02 10:14:31 +01:00
Jason A. Donenfeld
2cb489eb8d wireguard: selftests: use acpi=off instead of -no-acpi for recent QEMU
QEMU 9.0 removed -no-acpi, in favor of machine properties, so update the
Makefile to use the correct QEMU invocation.

Cc: stable@vger.kernel.org
Fixes: b83fdcd9fb ("wireguard: selftests: use microvm on x86")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20240704154517.1572127-2-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-05 17:21:10 -07:00
Linus Torvalds
a19264d086 printk changes for 6.10
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmZEh6AACgkQUqAMR0iA
 lPJzFw/+PCKHOFI1Z5Aj9negx97sYKAIuJrY9pFQfaxVUBzqZgIEXB/rkn4yurad
 KpK1UppMnLset+GLm+95+BTyP7G256q2jhWZ9u55i089YGrUKcibp+Jy9cCO02r5
 1c0+ZkyMxONgPnE+WcOW7B5p34cie6NFdvqrRzrW5WB4eLaGs3ksBow2j3jXWTii
 aOrsPPZWmT6wEJd4Hm1kZIgnz8gmlsm+VGTSHjjEvWWtvh5garKxCQ3COmdw1WAc
 dL+YjYqTIOQsifJeOpECy8+hZA4uoKpw2dWxfdHEH7F8RkhdumQdWxiGON+KXwXA
 cG1rIaas0gGvVpcvja/bPiATwzqTmXlGAHlrwiDEeiNqh/VckinDw/S82QdIVTii
 qttE2yv8cAVCpsk8GVjuE7unZREc0Ao2tAIz3on7dzFgVGVsK3mJBGAiqVJWDA/A
 3jlFsMoM899IJJ8Fvg0rcu/vkwE4ViiQCurcPgWWqPicHC310PSJ6O0cImbBsL+U
 kQxpkpEUnlgiDy19vKzhHlGR89xxLUxIiq78TRCYrM+NQ4PCvdGQMHe/Wm5EfhPx
 bgzYcNsWjmN4fzokIl+a641wvTCqiUmUqoy7TU+a8a2ssBNaVrHubMrJzkl2OLts
 miLz0xXG+RZA0Z1FNqy3+3EyxoGmUJqjM9jomDAxPvMvrNQjMHA=
 =y45P
 -----END PGP SIGNATURE-----

Merge tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux

Pull printk updates from Petr Mladek:

 - Use no_printk() instead of "if (0) printk()" constructs to avoid
   generating printk index for messages disabled at compile time

 - Remove deprecated strncpy/strcpy from printk.c

 - Remove redundant CONFIG_BASE_FULL in favor of CONFIG_BASE_SMALL

* tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: cleanup deprecated uses of strncpy/strcpy
  printk: Remove redundant CONFIG_BASE_FULL
  printk: Change type of CONFIG_BASE_SMALL to bool
  printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  ceph: Use no_printk() helper
  dyndbg: Use *no_printk() helpers
  dev_printk: Add and use dev_no_printk()
  printk: Let no_printk() use _printk()
2024-05-15 12:34:46 -07:00
Yoann Congal
27021649ec printk: Remove redundant CONFIG_BASE_FULL
CONFIG_BASE_FULL is equivalent to !CONFIG_BASE_SMALL and is enabled by
default: CONFIG_BASE_SMALL is the special case to take care of.
So, remove CONFIG_BASE_FULL and move the config choice to
CONFIG_BASE_SMALL (which defaults to 'n')

For defconfigs explicitely disabling BASE_FULL, explicitely enable
BASE_SMALL.
For defconfigs explicitely enabling BASE_FULL, drop it as it is the
default.

Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240505080343.1471198-4-yoann.congal@smile.fr
Signed-off-by: Petr Mladek <pmladek@suse.com>
2024-05-06 17:39:09 +02:00
Conor Dooley
1553a1c482 RISC-V: drop SOC_VIRT for ARCH_VIRT
The ARCH_ and SOC_ versions of this symbol have persisted for quite a
while now in parallel. Generated .config files from previous LTS kernels
should have both. Finally remove SOC_VIRT and update all config files
using it.

Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-04-10 11:37:50 +01:00
Jason A. Donenfeld
e995f5dd9a wireguard: selftests: set RISCV_ISA_FALLBACK on riscv{32,64}
This option is needed to continue booting with QEMU. Recent changes that
made this optional meant that it gets unset in the test harness, and so
WireGuard CI has been broken. Fix this by simply setting this option.

Cc: stable@vger.kernel.org
Fixes: 496ea826d1 ("RISC-V: provide Kconfig & commandline options to control parsing "riscv,isa"")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-19 11:22:50 +01:00
Randy Dunlap
ef815d2cba treewide: drop CONFIG_EMBEDDED
There is only one Kconfig user of CONFIG_EMBEDDED and it can be switched
to EXPERT or "if !ARCH_MULTIPLATFORM" (suggested by Arnd).

Link: https://lkml.kernel.org/r/20230816055010.31534-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>	[RISC-V]
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>	[powerpc]
Cc: Russell King <linux@armlinux.org.uk>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 13:46:25 -07:00
Jason A. Donenfeld
f58d0a9b4c wireguard: netlink: send staged packets when setting initial private key
Packets bound for peers can queue up prior to the device private key
being set. For example, if persistent keepalive is set, a packet is
queued up to be sent as soon as the device comes up. However, if the
private key hasn't been set yet, the handshake message never sends, and
no timer is armed to retry, since that would be pointless.

But, if a user later sets a private key, the expectation is that those
queued packets, such as a persistent keepalive, are actually sent. So
adjust the configuration logic to account for this edge case, and add a
test case to make sure this works.

Maxim noticed this with a wg-quick(8) config to the tune of:

    [Interface]
    PostUp = wg set %i private-key somefile

    [Peer]
    PublicKey = ...
    Endpoint = ...
    PersistentKeepalive = 25

Here, the private key gets set after the device comes up using a PostUp
script, triggering the bug.

Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Reported-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Tested-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Link: https://lore.kernel.org/wireguard/87fs7xtqrv.fsf@gmail.com/
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-03 09:17:52 +01:00
Jason A. Donenfeld
b9b01a5625 random: use random.trust_{bootloader,cpu} command line option only
It's very unusual to have both a command line option and a compile time
option, and apparently that's confusing to people. Also, basically
everybody enables the compile time option now, which means people who
want to disable this wind up having to use the command line option to
ensure that anyway. So just reduce the number of moving pieces and nix
the compile time option in favor of the more versatile command line
option.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-18 02:18:10 +01:00
Jason A. Donenfeld
8e25c02b8c wireguard: selftests: do not install headers on UML
Since 1b620d539c ("kbuild: disable header exports for UML in a
straightforward way"), installing headers fails on UML, so just disable
installing them, since they're not needed anyway on the architecture.

Fixes: b438b3b8d6 ("wireguard: selftests: support UML")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20 11:26:14 -07:00
Jason A. Donenfeld
9019b4f6d9
wireguard: selftests: set CONFIG_NONPORTABLE on riscv32
When the CONFIG_PORTABLE/CONFIG_NONPORTABLE switches were added, various
configs were updated, but the wireguard config was forgotten about. This
leads to unbootable test kernels, causing CI fails. Add
CONFIG_NONPORTABLE=y to the wireguard test suite configuration for
riscv32.

Fixes: 44c1e84a38 ("RISC-V: Add CONFIG_{NON,}PORTABLE")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220809145757.83673-1-Jason@zx2c4.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-12 07:47:12 -07:00
Linus Torvalds
f86d1fbbe7 Networking changes for 6.0.
Core
 ----
 
  - Refactor the forward memory allocation to better cope with memory
    pressure with many open sockets, moving from a per socket cache to
    a per-CPU one
 
  - Replace rwlocks with RCU for better fairness in ping, raw sockets
    and IP multicast router.
 
  - Network-side support for IO uring zero-copy send.
 
  - A few skb drop reason improvements, including codegen the source file
    with string mapping instead of using macro magic.
 
  - Rename reference tracking helpers to a more consistent
    netdev_* schema.
 
  - Adapt u64_stats_t type to address load/store tearing issues.
 
  - Refine debug helper usage to reduce the log noise caused by bots.
 
 BPF
 ---
  - Improve socket map performance, avoiding skb cloning on read
    operation.
 
  - Add support for 64 bits enum, to match types exposed by kernel.
 
  - Introduce support for sleepable uprobes program.
 
  - Introduce support for enum textual representation in libbpf.
 
  - New helpers to implement synproxy with eBPF/XDP.
 
  - Improve loop performances, inlining indirect calls when
    possible.
 
  - Removed all the deprecated libbpf APIs.
 
  - Implement new eBPF-based LSM flavor.
 
  - Add type match support, which allow accurate queries to the
    eBPF used types.
 
  - A few TCP congetsion control framework usability improvements.
 
  - Add new infrastructure to manipulate CT entries via eBPF programs.
 
  - Allow for livepatch (KLP) and BPF trampolines to attach to the same
    kernel function.
 
 Protocols
 ---------
 
  - Introduce per network namespace lookup tables for unix sockets,
    increasing scalability and reducing contention.
 
  - Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.
 
  - Add support to forciby close TIME_WAIT TCP sockets via user-space
    tools.
 
  - Significant performance improvement for the TLS 1.3 receive path,
    both for zero-copy and not-zero-copy.
 
  - Support for changing the initial MTPCP subflow priority/backup
    status
 
  - Introduce virtually contingus buffers for sockets over RDMA,
    to cope better with memory pressure.
 
  - Extend CAN ethtool support with timestamping capabilities
 
  - Refactor CAN build infrastructure to allow building only the needed
    features.
 
 Driver API
 ----------
 
  - Remove devlink mutex to allow parallel commands on multiple links.
 
  - Add support for pause stats in distributed switch.
 
  - Implement devlink helpers to query and flash line cards.
 
  - New helper for phy mode to register conversion.
 
 New hardware / drivers
 ----------------------
 
  - Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.
 
  - Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.
 
  - Ethernet DSA driver for the Microchip LAN937x switch.
 
  - Ethernet PHY driver for the Aquantia AQR113C EPHY.
 
  - CAN driver for the OBD-II ELM327 interface.
 
  - CAN driver for RZ/N1 SJA1000 CAN controller.
 
  - Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.
 
 Drivers
 -------
 
  - Intel Ethernet NICs:
    - i40e: add support for vlan pruning
    - i40e: add support for XDP framented packets
    - ice: improved vlan offload support
    - ice: add support for PPPoE offload
 
  - Mellanox Ethernet (mlx5)
    - refactor packet steering offload for performance and scalability
    - extend support for TC offload
    - refactor devlink code to clean-up the locking schema
    - support stacked vlans for bridge offloads
    - use TLS objects pool to improve connection rate
 
  - Netronome Ethernet NICs (nfp):
    - extend support for IPv6 fields mangling offload
    - add support for vepa mode in HW bridge
    - better support for virtio data path acceleration (VDPA)
    - enable TSO by default
 
  - Microsoft vNIC driver (mana)
    - add support for XDP redirect
 
  - Others Ethernet drivers:
    - bonding: add per-port priority support
    - microchip lan743x: extend phy support
    - Fungible funeth: support UDP segmentation offload and XDP xmit
    - Solarflare EF100: add support for virtual function representors
    - MediaTek SoC: add XDP support
 
  - Mellanox Ethernet/IB switch (mlxsw):
    - dropped support for unreleased H/W (XM router).
    - improved stats accuracy
    - unified bridge model coversion improving scalability
      (parts 1-6)
    - support for PTP in Spectrum-2 asics
 
  - Broadcom PHYs
    - add PTP support for BCM54210E
    - add support for the BCM53128 internal PHY
 
  - Marvell Ethernet switches (prestera):
    - implement support for multicast forwarding offload
 
  - Embedded Ethernet switches:
    - refactor OcteonTx MAC filter for better scalability
    - improve TC H/W offload for the Felix driver
    - refactor the Microchip ksz8 and ksz9477 drivers to share
      the probe code (parts 1, 2), add support for phylink
      mac configuration
 
  - Other WiFi:
    - Microchip wilc1000: diable WEP support and enable WPA3
    - Atheros ath10k: encapsulation offload support
 
 Old code removal:
 
  - Neterion vxge ethernet driver: this is untouched since more than
    10 years.
 
 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmLqN+oSHHBhYmVuaUBy
 ZWRoYXQuY29tAAoJECkkeY3MjxOkB9kQAI9VqW0c3SfiTJnkVBEIovZ6Tnh5stD2
 UYFkh1BdchLsYxi7W4XMpVPSzRztiTP87mIx5c/KvIzj+QNeWL1XWRJSPdI9HhTD
 pTAA/tM2OG7bqrbyQiKDNfpQdNl7+kk1RwnYd+f9RFl1QVuIJaYhmjVwrsN5xF/+
 jUsotpROarM2dGFWiFwJbKhP2zMDT+6qEEahM8pEPggKhv8wRLYjany2cZVEe4e0
 WGUpbINAS8gEKm0Ob922WaDfDrcK/N1Z0jNz/kMaENkK18Vvc7F6bCO0DzAawKX9
 QZMMwm6mHp3EThflJAMAzCGIYiIcwLhykgdyj8rrjPhFrWbMD2Sdsbo21HOXU/8j
 u4aAhVl+d+h7emmbgBoJ8sycVJ7BQlXz7lX20sTgADv9xI4/dPhQ17CMRuwX6fXX
 JSrn6P6e1LTV5CEg6vrlSPnKPY6uhFn/cPw47FxCjRwJ9phVnp+8uZWQmf9Pz3yf
 Ok/tcj+juFbsmuOshHy2cbRkuNZNS0oRWlSTBo5795ZwOLSakMonR3L+ev2aOvzz
 DVrFp2Y/iIVwMSFdCbouYdYnhArPRhOAtCmZc2afY8aBN7aaMgrdTy3+mzUoHy3I
 FG3K+VuKpfi0vY4zn6ZoLZDIpyXIoJJ93RcSGltD32t3Dp1RaQMVEI4s45k05PVm
 1nYpXKHA8qML
 =hxEG
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking changes from Paolo Abeni:
 "Core:

   - Refactor the forward memory allocation to better cope with memory
     pressure with many open sockets, moving from a per socket cache to
     a per-CPU one

   - Replace rwlocks with RCU for better fairness in ping, raw sockets
     and IP multicast router.

   - Network-side support for IO uring zero-copy send.

   - A few skb drop reason improvements, including codegen the source
     file with string mapping instead of using macro magic.

   - Rename reference tracking helpers to a more consistent netdev_*
     schema.

   - Adapt u64_stats_t type to address load/store tearing issues.

   - Refine debug helper usage to reduce the log noise caused by bots.

  BPF:

   - Improve socket map performance, avoiding skb cloning on read
     operation.

   - Add support for 64 bits enum, to match types exposed by kernel.

   - Introduce support for sleepable uprobes program.

   - Introduce support for enum textual representation in libbpf.

   - New helpers to implement synproxy with eBPF/XDP.

   - Improve loop performances, inlining indirect calls when possible.

   - Removed all the deprecated libbpf APIs.

   - Implement new eBPF-based LSM flavor.

   - Add type match support, which allow accurate queries to the eBPF
     used types.

   - A few TCP congetsion control framework usability improvements.

   - Add new infrastructure to manipulate CT entries via eBPF programs.

   - Allow for livepatch (KLP) and BPF trampolines to attach to the same
     kernel function.

  Protocols:

   - Introduce per network namespace lookup tables for unix sockets,
     increasing scalability and reducing contention.

   - Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.

   - Add support to forciby close TIME_WAIT TCP sockets via user-space
     tools.

   - Significant performance improvement for the TLS 1.3 receive path,
     both for zero-copy and not-zero-copy.

   - Support for changing the initial MTPCP subflow priority/backup
     status

   - Introduce virtually contingus buffers for sockets over RDMA, to
     cope better with memory pressure.

   - Extend CAN ethtool support with timestamping capabilities

   - Refactor CAN build infrastructure to allow building only the needed
     features.

  Driver API:

   - Remove devlink mutex to allow parallel commands on multiple links.

   - Add support for pause stats in distributed switch.

   - Implement devlink helpers to query and flash line cards.

   - New helper for phy mode to register conversion.

  New hardware / drivers:

   - Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.

   - Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.

   - Ethernet DSA driver for the Microchip LAN937x switch.

   - Ethernet PHY driver for the Aquantia AQR113C EPHY.

   - CAN driver for the OBD-II ELM327 interface.

   - CAN driver for RZ/N1 SJA1000 CAN controller.

   - Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.

  Drivers:

   - Intel Ethernet NICs:
      - i40e: add support for vlan pruning
      - i40e: add support for XDP framented packets
      - ice: improved vlan offload support
      - ice: add support for PPPoE offload

   - Mellanox Ethernet (mlx5)
      - refactor packet steering offload for performance and scalability
      - extend support for TC offload
      - refactor devlink code to clean-up the locking schema
      - support stacked vlans for bridge offloads
      - use TLS objects pool to improve connection rate

   - Netronome Ethernet NICs (nfp):
      - extend support for IPv6 fields mangling offload
      - add support for vepa mode in HW bridge
      - better support for virtio data path acceleration (VDPA)
      - enable TSO by default

   - Microsoft vNIC driver (mana)
      - add support for XDP redirect

   - Others Ethernet drivers:
      - bonding: add per-port priority support
      - microchip lan743x: extend phy support
      - Fungible funeth: support UDP segmentation offload and XDP xmit
      - Solarflare EF100: add support for virtual function representors
      - MediaTek SoC: add XDP support

   - Mellanox Ethernet/IB switch (mlxsw):
      - dropped support for unreleased H/W (XM router).
      - improved stats accuracy
      - unified bridge model coversion improving scalability (parts 1-6)
      - support for PTP in Spectrum-2 asics

   - Broadcom PHYs
      - add PTP support for BCM54210E
      - add support for the BCM53128 internal PHY

   - Marvell Ethernet switches (prestera):
      - implement support for multicast forwarding offload

   - Embedded Ethernet switches:
      - refactor OcteonTx MAC filter for better scalability
      - improve TC H/W offload for the Felix driver
      - refactor the Microchip ksz8 and ksz9477 drivers to share the
        probe code (parts 1, 2), add support for phylink mac
        configuration

   - Other WiFi:
      - Microchip wilc1000: diable WEP support and enable WPA3
      - Atheros ath10k: encapsulation offload support

  Old code removal:

   - Neterion vxge ethernet driver: this is untouched since more than 10 years"

* tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits)
  doc: sfp-phylink: Fix a broken reference
  wireguard: selftests: support UML
  wireguard: allowedips: don't corrupt stack when detecting overflow
  wireguard: selftests: update config fragments
  wireguard: ratelimiter: use hrtimer in selftest
  net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ
  net: usb: ax88179_178a: Bind only to vendor-specific interface
  selftests: net: fix IOAM test skip return code
  net: usb: make USB_RTL8153_ECM non user configurable
  net: marvell: prestera: remove reduntant code
  octeontx2-pf: Reduce minimum mtu size to 60
  net: devlink: Fix missing mutex_unlock() call
  net/tls: Remove redundant workqueue flush before destroy
  net: txgbe: Fix an error handling path in txgbe_probe()
  net: dsa: Fix spelling mistakes and cleanup code
  Documentation: devlink: add add devlink-selftests to the table of contents
  dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock
  net: ionic: fix error check for vlan flags in ionic_set_nic_features()
  net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr()
  nfp: flower: add support for tunnel offload without key ID
  ...
2022-08-03 16:29:08 -07:00
Jason A. Donenfeld
b438b3b8d6 wireguard: selftests: support UML
This shoud open up various possibilities like time travel execution, and
is also just another platform to help shake out bugs.

Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-02 13:47:50 -07:00
Lukas Bulwahn
2a8f91d289 wireguard: selftests: update config fragments
The kernel.config and debug.config fragments in wireguard selftests mention
some config symbols that have been reworked:

Commit c566586818 ("mm: kmemleak: use the memory pool for early
allocations") removes the config DEBUG_KMEMLEAK_EARLY_LOG_SIZE and since
then, the config's feature is available without further configuration.

Commit 4675ff05de ("kmemcheck: rip it out") removes kmemcheck and the
corresponding arch config HAVE_ARCH_KMEMCHECK. There is no need for this
config.

Commit 3bf195ae60 ("netfilter: nat: merge nf_nat_ipv4,6 into nat core")
removes the config NF_NAT_IPV4 and since then, the config's feature is
available without further configuration.

Commit 41a2901e7d ("rcu: Remove SPARSE_RCU_POINTER Kconfig option")
removes the config SPARSE_RCU_POINTER and since then, the config's feature
is enabled by default.

Commit dfb4357da6 ("time: Remove CONFIG_TIMER_STATS") removes the feature
and config CONFIG_TIMER_STATS without any replacement.

Commit 3ca17b1f36 ("lib/ubsan: remove null-pointer checks") removes the
check and config UBSAN_NULL without any replacement.

Adjust the config fragments to those changes in configs.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-02 13:47:50 -07:00
Jason A. Donenfeld
9592eef7c1 random: remove CONFIG_ARCH_RANDOM
When RDRAND was introduced, there was much discussion on whether it
should be trusted and how the kernel should handle that. Initially, two
mechanisms cropped up, CONFIG_ARCH_RANDOM, a compile time switch, and
"nordrand", a boot-time switch.

Later the thinking evolved. With a properly designed RNG, using RDRAND
values alone won't harm anything, even if the outputs are malicious.
Rather, the issue is whether those values are being *trusted* to be good
or not. And so a new set of options were introduced as the real
ones that people use -- CONFIG_RANDOM_TRUST_CPU and "random.trust_cpu".
With these options, RDRAND is used, but it's not always credited. So in
the worst case, it does nothing, and in the best case, maybe it helps.

Along the way, CONFIG_ARCH_RANDOM's meaning got sort of pulled into the
center and became something certain platforms force-select.

The old options don't really help with much, and it's a bit odd to have
special handling for these instructions when the kernel can deal fine
with the existence or untrusted existence or broken existence or
non-existence of that CPU capability.

Simplify the situation by removing CONFIG_ARCH_RANDOM and using the
ordinary asm-generic fallback pattern instead, keeping the two options
that are actually used. For now it leaves "nordrand" for now, as the
removal of that will take a different route.

Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-07-18 15:03:37 +02:00
Jason A. Donenfeld
b83fdcd9fb wireguard: selftests: use microvm on x86
This makes for faster tests, faster compile time, and allows us to ditch
ACPI finally.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06 20:04:06 -07:00
Jason A. Donenfeld
1a087eec25 wireguard: selftests: always call kernel makefile
These selftests are used for much more extensive changes than just the
wireguard source files. So always call the kernel's build file, which
will do something or nothing after checking the whole tree, per usual.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06 20:04:06 -07:00
Jason A. Donenfeld
1f2f341a62 wireguard: selftests: use virt machine on m68k
This should be a bit more stable hopefully.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06 20:04:06 -07:00
Jason A. Donenfeld
829be057db wireguard: selftests: set fake real time in init
Not all platforms have an RTC, and rather than trying to force one into
each, it's much easier to just set a fixed time. This is necessary
because WireGuard's latest handshakes parameter is returned in wallclock
time, and if the system time isn't set, and the system is really fast,
then this returns 0, which trips the test.

Turning this on requires setting CONFIG_COMPAT_32BIT_TIME=y, as musl
doesn't support settimeofday without it.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-06 20:04:05 -07:00
Jason A. Donenfeld
17b0128a13 wireguard: selftests: use maximum cpu features and allow rng seeding
By forcing the maximum CPU that QEMU has available, we expose additional
capabilities, such as the RNDR instruction, which increases test
coverage. This then allows the CI to skip the fake seeding step in some
cases. Also enable STRICT_KERNEL_RWX to catch issues related to early
jump labels when the RNG is initialized at boot.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-06-11 15:38:08 +02:00
Jason A. Donenfeld
3fc1b11e5d wireguard: selftests: set panic_on_warn=1 from cmdline
Rather than setting this once init is running, set panic_on_warn from
the kernel command line, so that it catches splats from WireGuard
initialization code and the various crypto selftests.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 17:49:57 -07:00
Jason A. Donenfeld
a6b8ea9144 wireguard: selftests: bump package deps
Use newer, more reliable package dependencies. These should hopefully
reduce flakes. However, we keep the old iputils package, as it
accumulated bugs after resulting in flakes on slow machines.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 17:49:57 -07:00
Jason A. Donenfeld
d261ba6aa4 wireguard: selftests: restore support for ccache
When moving to non-system toolchains, we inadvertantly killed the
ability to use ccache. So instead, build ccache support into the test
harness directly.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 17:49:56 -07:00
Jason A. Donenfeld
d5d9b29bc9 wireguard: selftests: use newer toolchains to fill out architectures
Rather than relying on the system to have cross toolchains available,
simply download musl.cc's ones and use that libc.so, and then we use it
to fill in a few missing platforms, such as riscv64, riscv64, powerpc64,
and s390x.

Since riscv doesn't have a second serial port in its device description,
we have to use virtio's vport. This is actually the same situation on
ARM, but we were previously hacking QEMU up to work around this, which
required a custom QEMU. Instead just do the vport trick on ARM too.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 17:49:56 -07:00
Jason A. Donenfeld
39f02bf1e5 wireguard: selftests: limit parallelism to $(nproc) tests at once
The parallel tests were added to catch queueing issues from multiple
cores. But what happens in reality when testing tons of processes is
that these separate threads wind up fighting with the scheduler, and we
wind up with contention in places we don't care about that decrease the
chances of hitting a bug. So just do a test with the number of CPU
cores, rather than trying to scale up arbitrarily.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 17:49:56 -07:00
Jason A. Donenfeld
ae2de669c1 wireguard: selftests: make routing loop test non-fatal
I hate to do this, but I still do not have a good solution to actually
fix this bug across architectures. So just disable it for now, so that
the CI can still deliver actionable results. This commit adds a large
red warning, so that at least the failure isn't lost forever, and
hopefully this can be revisited down the line.

Link: https://lore.kernel.org/netdev/CAHmME9pv1x6C4TNdL6648HydD8r+txpV4hTUXOBVkrapBXH4QQ@mail.gmail.com/
Link: https://lore.kernel.org/netdev/YmszSXueTxYOC41G@zx2c4.com/
Link: https://lore.kernel.org/wireguard/CAHmME9rNnBiNvBstb7MPwK-7AmAN0sOfnhdR=eeLrowWcKxaaQ@mail.gmail.com/
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04 17:49:56 -07:00
Jason A. Donenfeld
00f3d2ed9d wireguard: selftests: enable ACPI for SMP
It turns out that by having CONFIG_ACPI=n, we've been failing to boot
additional CPUs, and so these systems were functionally UP. The code
bloat is unfortunate for build times, but I don't see an alternative. So
this commit sets CONFIG_ACPI=y for x86_64 and i686 configs.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-22 15:59:05 -07:00
Jason A. Donenfeld
ca93ca2340 wireguard: selftests: simplify RNG seeding
The seed_rng() function was written to work across lots of old kernels,
back when WireGuard used a big compatibility layer. Now that things have
evolved, we can vastly simplify this, by just marking the RNG as seeded.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-30 19:14:08 -07:00
Jason A. Donenfeld
20ae1d6aa1 wireguard: device: reset peer src endpoint when netns exits
Each peer's endpoint contains a dst_cache entry that takes a reference
to another netdev. When the containing namespace exits, we take down the
socket and prevent future sockets from being created (by setting
creating_net to NULL), which removes that potential reference on the
netns. However, it doesn't release references to the netns that a netdev
cached in dst_cache might be taking, so the netns still might fail to
exit. Since the socket is gimped anyway, we can simply clear all the
dst_caches (by way of clearing the endpoint src), which will release all
references.

However, the current dst_cache_reset function only releases those
references lazily. But it turns out that all of our usages of
wg_socket_clear_peer_endpoint_src are called from contexts that are not
exactly high-speed or bottle-necked. For example, when there's
connection difficulty, or when userspace is reconfiguring the interface.
And in particular for this patch, when the netns is exiting. So for
those cases, it makes more sense to call dst_release immediately. For
that, we add a small helper function to dst_cache.

This patch also adds a test to netns.sh from Hangbin Liu to ensure this
doesn't regress.

Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Reported-by: Xiumei Mu <xmu@redhat.com>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Fixes: 900575aa33 ("wireguard: device: avoid circular netns references")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-29 19:50:45 -08:00
Li Zhijian
7e938beb83 wireguard: selftests: rename DEBUG_PI_LIST to DEBUG_PLIST
DEBUG_PI_LIST was renamed to DEBUG_PLIST since 8e18faeac3 ("lib/plist:
rename DEBUG_PI_LIST to DEBUG_PLIST").

Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Fixes: 8e18faeac3 ("lib/plist: rename DEBUG_PI_LIST to DEBUG_PLIST")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-29 19:50:40 -08:00
Jason A. Donenfeld
782c72af56 wireguard: selftests: actually test for routing loops
We previously removed the restriction on looping to self, and then added
a test to make sure the kernel didn't blow up during a routing loop. The
kernel didn't blow up, thankfully, but on certain architectures where
skb fragmentation is easier, such as ppc64, the skbs weren't actually
being discarded after a few rounds through. But the test wasn't catching
this. So actually test explicitly for massive increases in tx to see if
we have a routing loop. Note that the actual loop problem will need to
be addressed in a different commit.

Fixes: b673e24aad ("wireguard: socket: remove errant restriction on looping to self")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-29 19:50:29 -08:00
Jason A. Donenfeld
03ff1b1def wireguard: selftests: increase default dmesg log size
The selftests currently parse the kernel log at the end to track
potential memory leaks. With these tests now reading off the end of the
buffer, due to recent optimizations, some creation messages were lost,
making the tests think that there was a free without an alloc. Fix this
by increasing the kernel log size.

Fixes: 24b70eeeb4 ("wireguard: use synchronize_net rather than synchronize_rcu")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-29 19:50:29 -08:00
Jason A. Donenfeld
f8873d11d4 wireguard: selftests: make sure rp_filter is disabled on vethc
Some distros may enable strict rp_filter by default, which will prevent
vethc from receiving the packets with an unrouteable reverse path address.

Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-04 14:25:14 -07:00
Jason A. Donenfeld
acf2492b51 wireguard: selftests: remove old conntrack kconfig value
On recent kernels, this config symbol is no longer used.

Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-04 14:25:14 -07:00
Jason A. Donenfeld
d5a49aa6c3 wireguard: selftests: test multiple parallel streams
In order to test ndo_start_xmit being called in parallel, explicitly add
separate tests, which should all run on different cores. This should
help tease out bugs associated with queueing up packets from different
cores in parallel. Currently, it hasn't found those types of bugs, but
given future planned work, this is a useful regression to avoid.

Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-23 15:54:07 -08:00
Masahiro Yamada
1967939462 Compiler Attributes: remove CONFIG_ENABLE_MUST_CHECK
Revert commit cebc04ba9a ("add CONFIG_ENABLE_MUST_CHECK").

A lot of warn_unused_result warnings existed in 2006, but until now
they have been fixed thanks to people doing allmodconfig tests.

Our goal is to always enable __must_check where appropriate, so this
CONFIG option is no longer needed.

I see a lot of defconfig (arch/*/configs/*_defconfig) files having:

    # CONFIG_ENABLE_MUST_CHECK is not set

I did not touch them for now since it would be a big churn. If arch
maintainers want to clean them up, please go ahead.

While I was here, I also moved __must_check to compiler_attributes.h
from compiler_types.h

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
[Moved addition in compiler_attributes.h to keep it sorted]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2020-12-02 13:47:17 +01:00
Jason A. Donenfeld
af8afcf1fd wireguard: selftests: check that route_me_harder packets use the right sk
If netfilter changes the packet mark, the packet is rerouted. The
ip_route_me_harder family of functions fails to use the right sk, opting
to instead use skb->sk, resulting in a routing loop when used with
tunnels. With the next change fixing this issue in netfilter, test for
the relevant condition inside our test suite, since wireguard was where
the bug was discovered.

Reported-by: Chen Minqiang <ptpt52@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-10-30 12:57:38 +01:00
Jason A. Donenfeld
900575aa33 wireguard: device: avoid circular netns references
Before, we took a reference to the creating netns if the new netns was
different. This caused issues with circular references, with two
wireguard interfaces swapping namespaces. The solution is to rather not
take any extra references at all, but instead simply invalidate the
creating netns pointer when that netns is deleted.

In order to prevent this from happening again, this commit improves the
rough object leak tracking by allowing it to account for created and
destroyed interfaces, aside from just peers and keys. That then makes it
possible to check for the object leak when having two interfaces take a
reference to each others' namespaces.

Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23 14:50:34 -07:00
Linus Torvalds
533b220f7b arm64 updates for 5.8
- Branch Target Identification (BTI)
 	* Support for ARMv8.5-BTI in both user- and kernel-space. This
 	  allows branch targets to limit the types of branch from which
 	  they can be called and additionally prevents branching to
 	  arbitrary code, although kernel support requires a very recent
 	  toolchain.
 
 	* Function annotation via SYM_FUNC_START() so that assembly
 	  functions are wrapped with the relevant "landing pad"
 	  instructions.
 
 	* BPF and vDSO updates to use the new instructions.
 
 	* Addition of a new HWCAP and exposure of BTI capability to
 	  userspace via ID register emulation, along with ELF loader
 	  support for the BTI feature in .note.gnu.property.
 
 	* Non-critical fixes to CFI unwind annotations in the sigreturn
 	  trampoline.
 
 - Shadow Call Stack (SCS)
 	* Support for Clang's Shadow Call Stack feature, which reserves
 	  platform register x18 to point at a separate stack for each
 	  task that holds only return addresses. This protects function
 	  return control flow from buffer overruns on the main stack.
 
 	* Save/restore of x18 across problematic boundaries (user-mode,
 	  hypervisor, EFI, suspend, etc).
 
 	* Core support for SCS, should other architectures want to use it
 	  too.
 
 	* SCS overflow checking on context-switch as part of the existing
 	  stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
 
 - CPU feature detection
 	* Removed numerous "SANITY CHECK" errors when running on a system
 	  with mismatched AArch32 support at EL1. This is primarily a
 	  concern for KVM, which disabled support for 32-bit guests on
 	  such a system.
 
 	* Addition of new ID registers and fields as the architecture has
 	  been extended.
 
 - Perf and PMU drivers
 	* Minor fixes and cleanups to system PMU drivers.
 
 - Hardware errata
 	* Unify KVM workarounds for VHE and nVHE configurations.
 
 	* Sort vendor errata entries in Kconfig.
 
 - Secure Monitor Call Calling Convention (SMCCC)
 	* Update to the latest specification from Arm (v1.2).
 
 	* Allow PSCI code to query the SMCCC version.
 
 - Software Delegated Exception Interface (SDEI)
 	* Unexport a bunch of unused symbols.
 
 	* Minor fixes to handling of firmware data.
 
 - Pointer authentication
 	* Add support for dumping the kernel PAC mask in vmcoreinfo so
 	  that the stack can be unwound by tools such as kdump.
 
 	* Simplification of key initialisation during CPU bringup.
 
 - BPF backend
 	* Improve immediate generation for logical and add/sub
 	  instructions.
 
 - vDSO
 	- Minor fixes to the linker flags for consistency with other
 	  architectures and support for LLVM's unwinder.
 
 	- Clean up logic to initialise and map the vDSO into userspace.
 
 - ACPI
 	- Work around for an ambiguity in the IORT specification relating
 	  to the "num_ids" field.
 
 	- Support _DMA method for all named components rather than only
 	  PCIe root complexes.
 
 	- Minor other IORT-related fixes.
 
 - Miscellaneous
 	* Initialise debug traps early for KGDB and fix KDB cacheflushing
 	  deadlock.
 
 	* Minor tweaks to early boot state (documentation update, set
 	  TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
 
 	* Refactoring and cleanup
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl7U9csQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNLBHCACs/YU4SM7Om5f+7QnxIKao5DBr2CnGGvdC
 yTfDghFDTLQVv3MufLlfno3yBe5G8sQpcZfcc+hewfcGoMzVZXu8s7LzH6VSn9T9
 jmT3KjDMrg0RjSHzyumJp2McyelTk0a4FiKArSIIKsJSXUyb1uPSgm7SvKVDwEwU
 JGDzL9IGilmq59GiXfDzGhTZgmC37QdwRoRxDuqtqWQe5CHoRXYexg87HwBKOQxx
 HgU9L7ehri4MRZfpyjaDrr6quJo3TVnAAKXNBh3mZAskVS9ZrfKpEH0kYWYuqybv
 znKyHRecl/rrGePV8RTMtrwnSdU26zMXE/omsVVauDfG9hqzqm+Q
 =w3qi
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "A sizeable pile of arm64 updates for 5.8.

  Summary below, but the big two features are support for Branch Target
  Identification and Clang's Shadow Call stack. The latter is currently
  arm64-only, but the high-level parts are all in core code so it could
  easily be adopted by other architectures pending toolchain support

  Branch Target Identification (BTI):

   - Support for ARMv8.5-BTI in both user- and kernel-space. This allows
     branch targets to limit the types of branch from which they can be
     called and additionally prevents branching to arbitrary code,
     although kernel support requires a very recent toolchain.

   - Function annotation via SYM_FUNC_START() so that assembly functions
     are wrapped with the relevant "landing pad" instructions.

   - BPF and vDSO updates to use the new instructions.

   - Addition of a new HWCAP and exposure of BTI capability to userspace
     via ID register emulation, along with ELF loader support for the
     BTI feature in .note.gnu.property.

   - Non-critical fixes to CFI unwind annotations in the sigreturn
     trampoline.

  Shadow Call Stack (SCS):

   - Support for Clang's Shadow Call Stack feature, which reserves
     platform register x18 to point at a separate stack for each task
     that holds only return addresses. This protects function return
     control flow from buffer overruns on the main stack.

   - Save/restore of x18 across problematic boundaries (user-mode,
     hypervisor, EFI, suspend, etc).

   - Core support for SCS, should other architectures want to use it
     too.

   - SCS overflow checking on context-switch as part of the existing
     stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.

  CPU feature detection:

   - Removed numerous "SANITY CHECK" errors when running on a system
     with mismatched AArch32 support at EL1. This is primarily a concern
     for KVM, which disabled support for 32-bit guests on such a system.

   - Addition of new ID registers and fields as the architecture has
     been extended.

  Perf and PMU drivers:

   - Minor fixes and cleanups to system PMU drivers.

  Hardware errata:

   - Unify KVM workarounds for VHE and nVHE configurations.

   - Sort vendor errata entries in Kconfig.

  Secure Monitor Call Calling Convention (SMCCC):

   - Update to the latest specification from Arm (v1.2).

   - Allow PSCI code to query the SMCCC version.

  Software Delegated Exception Interface (SDEI):

   - Unexport a bunch of unused symbols.

   - Minor fixes to handling of firmware data.

  Pointer authentication:

   - Add support for dumping the kernel PAC mask in vmcoreinfo so that
     the stack can be unwound by tools such as kdump.

   - Simplification of key initialisation during CPU bringup.

  BPF backend:

   - Improve immediate generation for logical and add/sub instructions.

  vDSO:

   - Minor fixes to the linker flags for consistency with other
     architectures and support for LLVM's unwinder.

   - Clean up logic to initialise and map the vDSO into userspace.

  ACPI:

   - Work around for an ambiguity in the IORT specification relating to
     the "num_ids" field.

   - Support _DMA method for all named components rather than only PCIe
     root complexes.

   - Minor other IORT-related fixes.

  Miscellaneous:

   - Initialise debug traps early for KGDB and fix KDB cacheflushing
     deadlock.

   - Minor tweaks to early boot state (documentation update, set
     TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).

   - Refactoring and cleanup"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
  KVM: arm64: Move __load_guest_stage2 to kvm_mmu.h
  KVM: arm64: Check advertised Stage-2 page size capability
  arm64/cpufeature: Add get_arm64_ftr_reg_nowarn()
  ACPI/IORT: Remove the unused __get_pci_rid()
  arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context
  arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register
  arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register
  arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register
  arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register
  arm64/cpufeature: Add remaining feature bits in ID_PFR0 register
  arm64/cpufeature: Introduce ID_MMFR5 CPU register
  arm64/cpufeature: Introduce ID_DFR1 CPU register
  arm64/cpufeature: Introduce ID_PFR2 CPU register
  arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0
  arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register
  arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register
  arm64: mm: Add asid_gen_match() helper
  firmware: smccc: Fix missing prototype warning for arm_smccc_version_init
  arm64: vdso: Fix CFI directives in sigreturn trampoline
  arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction
  ...
2020-06-01 15:18:27 -07:00
Jason A. Donenfeld
ee3c1aa3f3 wireguard: selftests: use newer iproute2 for gcc-10
gcc-10 switched to defaulting to -fno-common, which broke iproute2-5.4.
This was fixed in iproute-5.6, so switch to that. Because we're after a
stable testing surface, we generally don't like to bump these
unnecessarily, but in this case, being able to actually build is a basic
necessity.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-20 20:55:09 -07:00
Kees Cook
8d58f222e8 ubsan: disable UBSAN_ALIGNMENT under COMPILE_TEST
The documentation for UBSAN_ALIGNMENT already mentions that it should
not be used on all*config builds (and for efficient-unaligned-access
architectures), so just refactor the Kconfig to correctly implement this
so randconfigs will stop creating insane images that freak out objtool
under CONFIG_UBSAN_TRAP (due to the false positives producing functions
that never return, etc).

Link: http://lkml.kernel.org/r/202005011433.C42EA3E2D@keescook
Fixes: 0887a7ebc9 ("ubsan: add trap instrumentation option")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
  Link: https://lore.kernel.org/linux-next/202004231224.D6B3B650@keescook/
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-07 19:27:21 -07:00
Jason A. Donenfeld
b673e24aad wireguard: socket: remove errant restriction on looping to self
It's already possible to create two different interfaces and loop
packets between them. This has always been possible with tunnels in the
kernel, and isn't specific to wireguard. Therefore, the networking stack
already needs to deal with that. At the very least, the packet winds up
exceeding the MTU and is discarded at that point. So, since this is
already something that happens, there's no need to forbid the not very
exceptional case of routing a packet back to the same interface; this
loop is no different than others, and we shouldn't special case it, but
rather rely on generic handling of loops in general. This also makes it
easier to do interesting things with wireguard such as onion routing.

At the same time, we add a selftest for this, ensuring that both onion
routing works and infinite routing loops do not crash the kernel. We
also add a test case for wireguard interfaces nesting packets and
sending traffic between each other, as well as the loop in this case
too. We make sure to send some throughput-heavy traffic for this use
case, to stress out any possible recursion issues with the locks around
workqueues.

Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06 20:03:47 -07:00
Jason A. Donenfeld
a0fd7cc87a wireguard: selftests: use normal kernel stack size on ppc64
While at some point it might have made sense to be running these tests
on ppc64 with 4k stacks, the kernel hasn't actually used 4k stacks on
64-bit powerpc in a long time, and more interesting things that we test
don't really work when we deviate from the default (16k). So, we stop
pushing our luck in this commit, and return to the default instead of
the minimum.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06 20:03:47 -07:00