The FPGA access through the GPIO port does not interfere with other
sound processor register access, so there is no need to subject it to
emu_lock. And after moving all FPGA access out of the interrupt handler,
it does not need to be IRQ-safe, either.
What's more, attaching the dock causes a firmware upload, which takes
several seconds. We really don't want to disable IRQs for this long, and
even less also have someone else spin with IRQs disabled waiting for us.
Therefore, use a mutex for FPGA access locking.
This makes the code somewhat more noisy, as we need to wrap bigger
sections into the mutex, as it needs to enclose the spinlocks.
The latter has the "side effect" of fixing dock FPGA programming in a
corner case: a really badly timed mixer access right between entering
FPGA programming mode and uploading the netlist would mess up the
protocol.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240428093716.3198666-5-oswald.buddenhagen@gmx.de>
- Remove the "log-like" parts, following the same logic as the previous
commit
- Unify format
- Add missing major contributors, including myself
- Sort entries in order of first contribution (Creative comes last for
optical reasons; they don't appear to have directly contributed
anyway)
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230715160839.326978-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Empty BUGS and TODO sections don't really help anyone, so remove them.
Version information is chronically outdated, and not really useful in a
git world anyway, so remove it as well.
Also remove duplicated (and outdated, of course) status section from
p16v.h (the one in p16v.c is in better shape).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230715160839.326978-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
85;95;0c
This uses IRQs to track spontaneous changes to the word clock source
register.
FWIW, that this can happen in the first place is the reason why it is
futile to lock the clock source mixer setting while the device is open -
we can't consistently control the rate anyway. Though arguably, we
should reset any open streams when that happens, as they become
corrupted anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230715160738.326832-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mixer, PCM prepare, MIDI, synth driver, and procfs callbacks are all
always invoked with IRQs enabled, so there is no point in saving the
state.
snd_emu1010_load_firmware_entry() is called from emu1010_firmware_work()
and snd_emu10k1_emu1010_init(); the latter from snd_emu10k1_create() and
snd_emu10k1_resume(), all of which have IRQs enabled.
The voice and memory functions are called from mixed contexts, so they
keep the state saving.
The low-level functions all keep the state saving, because it's not
feasible to keep track of what is called where.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230712145750.125086-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The actually available clock sources depend on the available audio input
ports and dedicated clock input ports.
This includes refactoring the code to be data-driven to remain
manageable.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far, we set the fallback as a side effect of setting the source. But
the fallback makes no sense at all when an internal clock is selected.
Defaulting to 48k for S/PDIF & ADAT makes sense, but as that is the
global default and we're not changing it automatically any more, it's
just fine to leave it entirely to the explicit setting.
This changes the name of the pre-existing control to something more
appropriate (regardless of the split), so users will need to adjust
their mixer settings.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230612191325.1315854-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of separate voices, we now allocate non-interleaved channels,
which may in turn contain two interleaved voices each. The higher-level
code keeps only one pointer per channel. The channels are not allocated
in one block any more, as there is no reason to do that. As a
consequence of that, and because it is cleaner regardless, we now let
the allocator store these pointers at a specified location, rather than
returning only the first one and having the calling code deduce the
remaining ones.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518140947.3725394-8-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
smatch reports
sound/pci/emu10k1/emumixer.c:519:39: warning: symbol
'emu1010_routing_info' was not declared. Should it be static?
sound/pci/emu10k1/emumixer.c:859:36: warning: symbol
'emu1010_pads_info' was not declared. Should it be static?
These variables are only used in their defining file, so it should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518123826.925752-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While this nicely denoises the code, the real intent is being able to
write many registers pseudo-atomically, which will come in handy later.
Idea stolen from kX-project.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230518093134.3697955-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Shrink the {in,out}put_source arrays and their data type to what is
actually necessary.
To be still on the safe side, add some static asserts.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-11-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Unlike the other models, this is actually a distinct card, rather than
an E-MU 1010 with different "dongles". It is stereo only, and supports
no ADAT (there is no trace of ADAT in the manual, switching the output
mode to ADAT has no effect, and switching the input mode to ADAT just
breaks input (presumably ... my only ADAT source is the card's output)).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-10-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The more card models are handled separately, the more code duplication
this saves.
add_emu1010_source_mixers() is factored out the save duplication in a
later commit.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-8-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
... and move it to the mixer init, as it's logically part of it.
As a side effect, this fixes the initial values of the input destination
mixer controls, which would have previously remained at "Silent" despite
different defaults. This didn't really matter, though, as ALSA state
restoration would hide that bug beyond first use.
Note that this completely does away with clearing the output routing
registers, as it was rather pointless - we just programmed the FPGA
(resetting it first if necessary), so everything is zeroed anyway
(that's documented by Xilinx, and as further evidence, some of the loops
terminated too early, and we didn't bother clearing the high channels of
the input routes at all, all with no observed adverse effects).
As a drive-by, this also fixes some capture channel defaults - any
EMU_SRC_*2 isn't a sensible value in 1x clock mode.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of hard-coding the card-specific arrays and their sizes in each
function, use a more data-driven approach.
As a drive-by, also hide the unavailable I2S input destinations on the
1616 cardbus card.
Also as a drive-by, use more assignments at variable declaration for
brevity. This also removes the pointless masking of kctl.private_value.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Define arrays of strings instead of snd_kcontrol_new.
While at it, move the E-MU source & destination enum defs next to their
hardware defs, which is a lot more logical and will come in handy in a
followup commit. And add some static asserts to verify that the array
sizes match.
This also applies the compactization from the previous commit to the
destination registers.
While reshuffling the arrays anyway, switch the order of the HAMOA_DAC
& HANA_SPDIF output destinations for the 1010 card, so they follow a
more regular pattern. This should have no functional impact.
The code is somewhat de-duplicated by the extraction of add_ctls().
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use macros to avoid duplication. Arguably, this is somewhat less
legible, but future additions would grow this part of the file to
completely unmanageable dimensions.
The EMU*_COMMON_TEXTS macros will save duplication in a future commit;
I pulled them ahead to reduce churn.
While rewriting the tables anyway, rearrange them such that each card's
strings and registers are adjacent.
Also, add some static asserts to verify that the array sizes match.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536508-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mixer structures were filled in two places: on driver init, and when
the devices are opened. The latter made the former pointless, so we
remove the former. This implies that mixer dumps may now return all
zeroes, which is OK, as restoring them is meaningless as well.
Things were even weirder for the (generally unused) secondary sends:
Some of the initialization loops were forgotten when support for Audigy
was added, thus creating the technically illegal state of multiple sends
being routed to the same FX accumulator (though it apparently doesn't
matter when the amount is zero).
The global multi-channel init used some rather bizarre values for the
secondary sends, and the init on open actually forgot to re-initialize
them. We now use a not really more useful, but simpler formula.
The direct register init was also bogus. This doesn't really matter, as
the value is overwritten when a voice comes into use, but still.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536451-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The voice volume is a raw fractional multiplier that can't actually
represent 1.0. To still enable real pass-through, we now set the volume
to 0.5 (which results in no loss of precision, as the FX bus provides
fractional values) and scale up the samples in DSP code.
To maintain backwards compatibility with existing configuration files,
we rescale the values in the mixer controls. The range is extended
upwards from 0xffff to 0x1fffd, which actually introduces the
possibility of specifying an amplification.
There is still a minor incompatibility with user space, namely if
someone loaded custom DSP code. They'll just get half the volume, so
this doesn't seem like a big deal.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230514170323.3408834-8-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Fix mixer source port names. These will require some users to
re-adjust their mixer settings, which seems acceptable:
- The S/PDIF port is on the main 1010 card, not the 0202 daughter card
- The 1616m CardBus card has all inputs on the dock, so there is
no point in specifying it
- Conversely, the 1010 card has "dispersed" inputs, so say where the
ADAT port is, consistently with the S/PDIF port
- The 1616m CardBus card is actually named E-MU 02 (due to the headphone
output jack it has)
- Fix capitalization of "E-MU"
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230428095941.1706335-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since commit 5bbb1ab5bd ("control: use counting semaphore as write lock
for ELEM_WRITE operation"), mixer values have been fully read-write
locked. This means that it is now unnecessary to apply any additional
locks to values that are accessed solely by mixer callbacks. Values that
are read outside mixer callbacks still need write locking. There are no
cases of mixer values being written outside mixer callbacks, so no read
locks remain in mixer callbacks.
Note that the removed locks refer only to the emu data structure, not
the card's registers as the lock's name suggests.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230428095941.1706278-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The function does read-modify-write cycles on the card's registers, and
doesn't access mutable members of the emu data structure.
I suppose this might have been a mixup due to the lock names being
logically swapped.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230428095941.1706278-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Using the *_MASK defines for "maximal value" is debatable. I got the
idea from FreeBSD, and it sorta makes sense to me.
Some hunks look a bit incomplete, because code that is going to be
subsequently removed is not touched here.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230428080732.1697695-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move comments to better locations, de-duplicate, fix/remove incorrect/
outdated ones, add new ones, and unify spacing somewhat.
While at it, also add testing credits for Jonathan Dowland (SB Live!
Platinum) and myself (E-MU 0404b).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As the register definition clearly states, this is a 16-bit register,
yet we did all accesses as 32-bit. The writes in particular would have
the potential to clear the TIMER register (depending on how the bus/card
actually handles the too long writes).
This commit also introduces a separate define A_GPIO which aliases
A_IOCFG, which better reflects the distinct usage on E-MU cards.
This is done in the same commit to keep the churn down, as we're
touching all involved lines anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With the recent addition of hashed controls lookup it's not enough to just
update the control name field, the hash entries for the modified control
have to be updated too.
snd_ctl_rename() takes care of that, so use it instead of directly
modifying the control name.
Fixes: c27e1efb61 ("ALSA: control: Use xarray for faster lookups")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/r/38b19f019f95ee78a6e4e59d39afb9e2c3379413.1666296963.git.maciej.szmigiero@oracle.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
PCI EMU10k1 driver code contains a few assignments in if condition,
which is a bad coding style that may confuse readers and occasionally
lead to bugs.
This patch is merely for coding-style fixes, no functional changes.
Link: https://lore.kernel.org/r/20210608140540.17885-41-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to the remaining possible places: the static tables
for init verbs and registers, the string arrays, the conversion
tables, etc.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-15-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Most of snd_kcontrol_new definitions are read-only and passed as-is.
Let's declare them as const for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-38-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now snd_ac97_bus() takes the const ops pointer, so we can define the
snd_ac97_bus_ops locally as const as well for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-28-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declare snd_kcontrol_new structures as const as they are only passed as
an argument to the function snd_ctl_new1. This argument is of type
const, so snd_kcontrol_new structures having the same property can be
made const too.
Done using Coccinelle:
@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct snd_kcontrol_new i@p = {...};
@ok1@
identifier r1.i;
position p;
expression e1;
@@
snd_ctl_new1(&i@p,e1)
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct snd_kcontrol_new i;
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Audigy has "Analog Capture Boost" mixer control,
however now this only controls mic level, not
other analog sources.
It applies also both to playback and capture,
so rename it to something more descriptive.
Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Enable TAD output on Audigy naming it "Phone Output",
to be consistent with TAD input which is called "Phone".
According to Creative doc
( http://support.creative.com/kb/ShowArticle.aspx?sid=3026 )
this should output just mic signal.
Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AC'97 Headphone output and EAPD control aren't used
on Audigy so remove them from mixer.
Also remove AC'97 3D control as the driver is
already doing for Audigys with 1361T ADC.
Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The optical ports on the E-mu 1010 (and dock) can be configured
for ADAT- or S/PDIF-mode, which is currently hardcoded to ADAT.
Add two mixer elements to expose this setting.
Tested on an E-mu 1010 PCIe with connected Micro Dock.
Signed-off-by: Michael Gernoth <michael@gernoth.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CONFIG_HOTPLUG is going away as an option. As result the __dev*
markings will be going away.
Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove "Front Playback Volume" and "Front Playback Switch" from emu10k1 only
for STAC9758/59
Since commit 7eae36fbd5
"Fix the confliction of 'Front' control",
the "Front Playback Volume" control created by commit
edf8e4565c
"emu10k1: Front channels via fxbus 8 and 9"
was removed
"Front Playback Volume" and "Surround Playback Volume" have same dB range
since I2S DAC of SB Live! and SB Live! Platinum does not has any hardware
volume control.
Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
SB Live! Platinum CT4760P is just a 4 channels sound card with STAC9721 and
Philips UDA1334 DAC.
Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
