mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2025-08-15 11:41:35 +00:00
master
33 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
352af6a011 |
Rust changes for v6.17
Toolchain and infrastructure:
- Enable a set of Clippy lints: 'ptr_as_ptr', 'ptr_cast_constness',
'as_ptr_cast_mut', 'as_underscore', 'cast_lossless' and 'ref_as_ptr'.
These are intended to avoid type casts with the 'as' operator, which
are quite powerful, into restricted variants that are less powerful
and thus should help to avoid mistakes.
- Remove the 'author' key now that most instances were moved to the
plural one in the previous cycle.
'kernel' crate:
- New 'bug' module: add 'warn_on!' macro which reuses the existing
'BUG'/'WARN' infrastructure, i.e. it respects the usual sysctls and
kernel parameters:
warn_on!(value == 42);
To avoid duplicating the assembly code, the same strategy is followed
as for the static branch code in order to share the assembly between
both C and Rust. This required a few rearrangements on C arch headers
-- the existing C macros should still generate the same outputs, thus
no functional change expected there.
- 'workqueue' module: add delayed work items, including a 'DelayedWork'
struct, a 'impl_has_delayed_work!' macro and an 'enqueue_delayed'
method, e.g.:
/// Enqueue the struct for execution on the system workqueue,
/// where its value will be printed 42 jiffies later.
fn print_later(value: Arc<MyStruct>) {
let _ = workqueue::system().enqueue_delayed(value, 42);
}
- New 'bits' module: add support for 'bit' and 'genmask' functions,
with runtime- and compile-time variants, e.g.:
static_assert!(0b00010000 == bit_u8(4));
static_assert!(0b00011110 == genmask_u8(1..=4));
assert!(checked_bit_u32(u32::BITS).is_none());
- 'uaccess' module: add 'UserSliceReader::strcpy_into_buf', which reads
NUL-terminated strings from userspace into a '&CStr'.
Introduce 'UserPtr' newtype, similar in purpose to '__user' in C, to
minimize mistakes handling userspace pointers, including mixing them
up with integers and leaking them via the 'Debug' trait. Add it to
the prelude, too.
- Start preparations for the replacement of our custom 'CStr' type
with the analogous type in the 'core' standard library. This will
take place across several cycles to make it easier. For this one,
it includes a new 'fmt' module, using upstream method names and some
other cleanups.
Replace 'fmt!' with a re-export, which helps Clippy lint properly,
and clean up the found 'uninlined-format-args' instances.
- 'dma' module:
- Clarify wording and be consistent in 'coherent' nomenclature.
- Convert the 'read!()' and 'write!()' macros to return a 'Result'.
- Add 'as_slice()', 'write()' methods in 'CoherentAllocation'.
- Expose 'count()' and 'size()' in 'CoherentAllocation' and add the
corresponding type invariants.
- Implement 'CoherentAllocation::dma_handle_with_offset()'.
- 'time' module:
- Make 'Instant' generic over clock source. This allows the compiler
to assert that arithmetic expressions involving the 'Instant' use
'Instants' based on the same clock source.
- Make 'HrTimer' generic over the timer mode. 'HrTimer' timers take a
'Duration' or an 'Instant' when setting the expiry time, depending
on the timer mode. With this change, the compiler can check the
type matches the timer mode.
- Add an abstraction for 'fsleep'. 'fsleep' is a flexible sleep
function that will select an appropriate sleep method depending on
the requested sleep time.
- Avoid 64-bit divisions on 32-bit hardware when calculating
timestamps.
- Seal the 'HrTimerMode' trait. This prevents users of the
'HrTimerMode' from implementing the trait on their own types.
- Pass the correct timer mode ID to 'hrtimer_start_range_ns()'.
- 'list' module: remove 'OFFSET' constants, allowing to remove pointer
arithmetic; now 'impl_list_item!' invokes 'impl_has_list_links!' or
'impl_has_list_links_self_ptr!'. Other simplifications too.
- 'types' module: remove 'ForeignOwnable::PointedTo' in favor of a
constant, which avoids exposing the type of the opaque pointer, and
require 'into_foreign' to return non-null.
Remove the 'Either<L, R>' type as well. It is unused, and we want to
encourage the use of custom enums for concrete use cases.
- 'sync' module: implement 'Borrow' and 'BorrowMut' for 'Arc' types
to allow them to be used in generic APIs.
- 'alloc' module: implement 'Borrow' and 'BorrowMut' for 'Box<T, A>';
and 'Borrow', 'BorrowMut' and 'Default' for 'Vec<T, A>'.
- 'Opaque' type: add 'cast_from' method to perform a restricted cast
that cannot change the inner type and use it in callers of
'container_of!'. Rename 'raw_get' to 'cast_into' to match it.
- 'rbtree' module: add 'is_empty' method.
- 'sync' module: new 'aref' submodule to hold 'AlwaysRefCounted' and
'ARef', which are moved from the too general 'types' module which we
want to reduce or eventually remove. Also fix a safety comment in
'static_lock_class'.
'pin-init' crate:
- Add 'impl<T, E> [Pin]Init<T, E> for Result<T, E>', so results are now
(pin-)initializers.
- Add 'Zeroable::init_zeroed()' that delegates to 'init_zeroed()'.
- New 'zeroed()', a safe version of 'mem::zeroed()' and also provide
it via 'Zeroable::zeroed()'.
- Implement 'Zeroable' for 'Option<&T>', 'Option<&mut T>' and for
'Option<[unsafe] [extern "abi"] fn(...args...) -> ret>' for '"Rust"'
and '"C"' ABIs and up to 20 arguments.
- Changed blanket impls of 'Init' and 'PinInit' from 'impl<T, E>
[Pin]Init<T, E> for T' to 'impl<T> [Pin]Init<T> for T'.
- Renamed 'zeroed()' to 'init_zeroed()'.
- Upstream dev news: improve CI more to deny warnings, use
'--all-targets'. Check the synchronization status of the two '-next'
branches in upstream and the kernel.
MAINTAINERS:
- Add Vlastimil Babka, Liam R. Howlett, Uladzislau Rezki and Lorenzo
Stoakes as reviewers (thanks everyone).
And a few other cleanups and improvements.
-----BEGIN PGP SIGNATURE-----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=5Wt9
-----END PGP SIGNATURE-----
Merge tag 'rust-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Enable a set of Clippy lints: 'ptr_as_ptr', 'ptr_cast_constness',
'as_ptr_cast_mut', 'as_underscore', 'cast_lossless' and
'ref_as_ptr'
These are intended to avoid type casts with the 'as' operator,
which are quite powerful, into restricted variants that are less
powerful and thus should help to avoid mistakes
- Remove the 'author' key now that most instances were moved to the
plural one in the previous cycle
'kernel' crate:
- New 'bug' module: add 'warn_on!' macro which reuses the existing
'BUG'/'WARN' infrastructure, i.e. it respects the usual sysctls and
kernel parameters:
warn_on!(value == 42);
To avoid duplicating the assembly code, the same strategy is
followed as for the static branch code in order to share the
assembly between both C and Rust
This required a few rearrangements on C arch headers -- the
existing C macros should still generate the same outputs, thus no
functional change expected there
- 'workqueue' module: add delayed work items, including a
'DelayedWork' struct, a 'impl_has_delayed_work!' macro and an
'enqueue_delayed' method, e.g.:
/// Enqueue the struct for execution on the system workqueue,
/// where its value will be printed 42 jiffies later.
fn print_later(value: Arc<MyStruct>) {
let _ = workqueue::system().enqueue_delayed(value, 42);
}
- New 'bits' module: add support for 'bit' and 'genmask' functions,
with runtime- and compile-time variants, e.g.:
static_assert!(0b00010000 == bit_u8(4));
static_assert!(0b00011110 == genmask_u8(1..=4));
assert!(checked_bit_u32(u32::BITS).is_none());
- 'uaccess' module: add 'UserSliceReader::strcpy_into_buf', which
reads NUL-terminated strings from userspace into a '&CStr'
Introduce 'UserPtr' newtype, similar in purpose to '__user' in C,
to minimize mistakes handling userspace pointers, including mixing
them up with integers and leaking them via the 'Debug' trait. Add
it to the prelude, too
- Start preparations for the replacement of our custom 'CStr' type
with the analogous type in the 'core' standard library. This will
take place across several cycles to make it easier. For this one,
it includes a new 'fmt' module, using upstream method names and
some other cleanups
Replace 'fmt!' with a re-export, which helps Clippy lint properly,
and clean up the found 'uninlined-format-args' instances
- 'dma' module:
- Clarify wording and be consistent in 'coherent' nomenclature
- Convert the 'read!()' and 'write!()' macros to return a 'Result'
- Add 'as_slice()', 'write()' methods in 'CoherentAllocation'
- Expose 'count()' and 'size()' in 'CoherentAllocation' and add
the corresponding type invariants
- Implement 'CoherentAllocation::dma_handle_with_offset()'
- 'time' module:
- Make 'Instant' generic over clock source. This allows the
compiler to assert that arithmetic expressions involving the
'Instant' use 'Instants' based on the same clock source
- Make 'HrTimer' generic over the timer mode. 'HrTimer' timers
take a 'Duration' or an 'Instant' when setting the expiry time,
depending on the timer mode. With this change, the compiler can
check the type matches the timer mode
- Add an abstraction for 'fsleep'. 'fsleep' is a flexible sleep
function that will select an appropriate sleep method depending
on the requested sleep time
- Avoid 64-bit divisions on 32-bit hardware when calculating
timestamps
- Seal the 'HrTimerMode' trait. This prevents users of the
'HrTimerMode' from implementing the trait on their own types
- Pass the correct timer mode ID to 'hrtimer_start_range_ns()'
- 'list' module: remove 'OFFSET' constants, allowing to remove
pointer arithmetic; now 'impl_list_item!' invokes
'impl_has_list_links!' or 'impl_has_list_links_self_ptr!'. Other
simplifications too
- 'types' module: remove 'ForeignOwnable::PointedTo' in favor of a
constant, which avoids exposing the type of the opaque pointer, and
require 'into_foreign' to return non-null
Remove the 'Either<L, R>' type as well. It is unused, and we want
to encourage the use of custom enums for concrete use cases
- 'sync' module: implement 'Borrow' and 'BorrowMut' for 'Arc' types
to allow them to be used in generic APIs
- 'alloc' module: implement 'Borrow' and 'BorrowMut' for 'Box<T, A>';
and 'Borrow', 'BorrowMut' and 'Default' for 'Vec<T, A>'
- 'Opaque' type: add 'cast_from' method to perform a restricted cast
that cannot change the inner type and use it in callers of
'container_of!'. Rename 'raw_get' to 'cast_into' to match it
- 'rbtree' module: add 'is_empty' method
- 'sync' module: new 'aref' submodule to hold 'AlwaysRefCounted' and
'ARef', which are moved from the too general 'types' module which
we want to reduce or eventually remove. Also fix a safety comment
in 'static_lock_class'
'pin-init' crate:
- Add 'impl<T, E> [Pin]Init<T, E> for Result<T, E>', so results are
now (pin-)initializers
- Add 'Zeroable::init_zeroed()' that delegates to 'init_zeroed()'
- New 'zeroed()', a safe version of 'mem::zeroed()' and also provide
it via 'Zeroable::zeroed()'
- Implement 'Zeroable' for 'Option<&T>', 'Option<&mut T>' and for
'Option<[unsafe] [extern "abi"] fn(...args...) -> ret>' for
'"Rust"' and '"C"' ABIs and up to 20 arguments
- Changed blanket impls of 'Init' and 'PinInit' from 'impl<T, E>
[Pin]Init<T, E> for T' to 'impl<T> [Pin]Init<T> for T'
- Renamed 'zeroed()' to 'init_zeroed()'
- Upstream dev news: improve CI more to deny warnings, use
'--all-targets'. Check the synchronization status of the two
'-next' branches in upstream and the kernel
MAINTAINERS:
- Add Vlastimil Babka, Liam R. Howlett, Uladzislau Rezki and Lorenzo
Stoakes as reviewers (thanks everyone)
And a few other cleanups and improvements"
* tag 'rust-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (76 commits)
rust: Add warn_on macro
arm64/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
riscv/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
x86/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
rust: kernel: move ARef and AlwaysRefCounted to sync::aref
rust: sync: fix safety comment for `static_lock_class`
rust: types: remove `Either<L, R>`
rust: kernel: use `core::ffi::CStr` method names
rust: str: add `CStr` methods matching `core::ffi::CStr`
rust: str: remove unnecessary qualification
rust: use `kernel::{fmt,prelude::fmt!}`
rust: kernel: add `fmt` module
rust: kernel: remove `fmt!`, fix clippy::uninlined-format-args
scripts: rust: emit path candidates in panic message
scripts: rust: replace length checks with match
rust: list: remove nonexistent generic parameter in link
rust: bits: add support for bits/genmask macros
rust: list: remove OFFSET constants
rust: list: add `impl_list_item!` examples
rust: list: use fully qualified path
...
|
||
|
Linus Torvalds
|
8be4d31cb8 |
Networking changes for 6.17.
Core & protocols
----------------
- Wrap datapath globals into net_aligned_data, to avoid false sharing.
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container).
- Add SO_INQ and SCM_INQ support to AF_UNIX.
- Add SIOCINQ support to AF_VSOCK.
- Add TCP_MAXSEG sockopt to MPTCP.
- Add IPv6 force_forwarding sysctl to enable forwarding per interface.
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB.
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users.
- Convert TCP send queue handling from tasklet to BH workque.
- Improve BPF iteration over TCP sockets to see each socket exactly once.
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code.
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel NAPI
thread when threaded NAPI gets disabled. Previously thread would stick
around until ifdown due to tricky synchronization.
- Allow multicast routing to take effect on locally-generated packets.
- Add output interface argument for End.X in segment routing.
- MCTP: add support for gateway routing, improve bind() handling.
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink.
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed.
- Support NUD_PERMANENT for proxy neighbor entries.
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM.
- Add sequence numbers to netconsole messages. Unregister netconsole's
console when all net targets are removed. Code refactoring.
Add a number of selftests.
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup.
- Support inspecting ref_tracker state via DebugFS.
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links.
- Allow providing upcall pid for the 'execute' command in openvswitch.
- Remove DCCP support from Netfilter's conntrack.
- Disallow multiple packet duplications in the queuing layer.
- Prevent use of deprecated iptables code on PREEMPT_RT.
Driver API
----------
- Support RSS and hashing configuration over ethtool Netlink.
- Add dedicated ethtool callbacks for getting and setting hashing fields.
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc.
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs.
- Support traffic classes in devlink rate API for bandwidth management.
- Remove rtnl_lock dependency from UDP tunnel port configuration.
Device drivers
--------------
- Add a new Broadcom driver for 800G Ethernet (bnge).
- Add a standalone driver for Microchip ZL3073x DPLL.
- Remove IBM's NETIUCV device driver.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is used
by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lqbe
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
||
|
FUJITA Tomonori
|
9a8682f087 |
rust: net::phy Change module_phy_driver macro to use module_device_table macro
Change module_phy_driver macro to build device tables which are exported to userspace by using module_device_table macro. Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Trevor Gross <tmgross@umich.edu> Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Link: https://lore.kernel.org/r/20250711040947.1252162-4-fujita.tomonori@gmail.com Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
FUJITA Tomonori
|
f65a3218fd |
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
Refactor the DeviceId struct to be a #[repr(transparent)] wrapper around the C struct bindings::mdio_device_id. This refactoring is a preparation for enabling the PHY abstractions to use the RawDeviceId trait. Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Trevor Gross <tmgross@umich.edu> Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Link: https://lore.kernel.org/r/20250711040947.1252162-3-fujita.tomonori@gmail.com Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Alice Ryhl
|
2f5606afa4 |
device: rust: rename Device::as_ref() to Device::from_raw()
The prefix as_* should not be used for a constructor. Constructors usually use the prefix from_* instead. Some prior art in the stdlib: Box::from_raw, CString::from_raw, Rc::from_raw, Arc::from_raw, Waker::from_raw, File::from_raw_fd. There is also prior art in the kernel crate: cpufreq::Policy::from_raw, fs::File::from_raw_file, Kuid::from_raw, ARef::from_raw, SeqFile::from_raw, VmaNew::from_raw, Io::from_raw. Link: https://lore.kernel.org/r/aCd8D5IA0RXZvtcv@pollux Signed-off-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Benno Lossin <lossin@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20250711-device-as-ref-v2-1-1b16ab6402d7@google.com Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Tamir Duberstein
|
c9a7bcd2c0 |
Cast to the proper type
Use the ffi type rather than the resolved underlying type. Acked-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Signed-off-by: Tamir Duberstein <tamird@gmail.com> Link: https://patch.msgid.link/20250625-correct-type-cast-v2-2-6f2c29729e69@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Tamir Duberstein
|
22955d942f |
Use unqualified references to ffi types
Remove unnecessary qualifications; `kernel::ffi::*` is included in `kernel::prelude`. Signed-off-by: Tamir Duberstein <tamird@gmail.com> Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Link: https://patch.msgid.link/20250625-correct-type-cast-v2-1-6f2c29729e69@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Tamir Duberstein
|
b7c8d7a8d2 |
rust: enable clippy::cast_lossless lint
Before Rust 1.29.0, Clippy introduced the `cast_lossless` lint [1]: > Rust’s `as` keyword will perform many kinds of conversions, including > silently lossy conversions. Conversion functions such as `i32::from` > will only perform lossless conversions. Using the conversion functions > prevents conversions from becoming silently lossy if the input types > ever change, and makes it clear for people reading the code that the > conversion is lossless. While this doesn't eliminate unchecked `as` conversions, it makes such conversions easier to scrutinize. It also has the slight benefit of removing a degree of freedom on which to bikeshed. Thus apply the changes and enable the lint -- no functional change intended. Link: https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless [1] Suggested-by: Benno Lossin <benno.lossin@proton.me> Link: https://lore.kernel.org/all/D8ORTXSUTKGL.1KOJAGBM8F8TN@proton.me/ Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Tamir Duberstein <tamird@gmail.com> Acked-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Acked-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Danilo Krummrich <dakr@kernel.org> Link: https://lore.kernel.org/r/20250615-ptr-as-ptr-v12-5-f43b024581e8@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Christian Marangi
|
31afd6bc55 |
net: phy: pass PHY driver to .match_phy_device OP
Pass PHY driver pointer to .match_phy_device OP in addition to phydev. Having access to the PHY driver struct might be useful to check the PHY ID of the driver is being matched for in case the PHY ID scanned in the phydev is not consistent. A scenario for this is a PHY that change PHY ID after a firmware is loaded, in such case, the PHY ID stored in PHY device struct is not valid anymore and PHY will manually scan the ID in the match_phy_device function. Having the PHY driver info is also useful for those PHY driver that implement multiple simple .match_phy_device OP to match specific MMD PHY ID. With this extra info if the parsing logic is the same, the matching function can be generalized by using the phy_id in the PHY driver instead of hardcoding. Rust wrapper callback is updated to align to the new match_phy_device arguments. Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Benno Lossin <lossin@kernel.org> # for Rust Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Link: https://patch.msgid.link/20250517201353.5137-2-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Guilherme Giacomo Simoes
|
38559da6af |
rust: module: introduce authors key
In the `module!` macro, the `author` field is currently of type `String`.
Since modules can have multiple authors, this limitation prevents
specifying more than one.
Add an `authors` field as `Option<Vec<String>>` to allow creating
modules with multiple authors, and change the documentation and all
current users to use it. Eventually, the single `author` field may
be removed.
[ The `modinfo` key needs to still be `author`; otherwise, tooling
may not work properly, e.g.:
$ modinfo --author samples/rust/rust_print.ko
Rust for Linux Contributors
I have also kept the original `author` field (undocumented), so
that we can drop it more easily in a kernel cycle or two.
- Miguel ]
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/244
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Guilherme Giacomo Simoes <trintaeoitogc@gmail.com>
Link: https://lore.kernel.org/r/20250309175712.845622-2-trintaeoitogc@gmail.com
[ Fixed `modinfo` key. Kept `author` field. Reworded message
accordingly. Updated my email. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
||
|
Linus Torvalds
|
0ad9617c78 |
Networking changes for 6.14.
Core
----
- More core refactoring to reduce the RTNL lock contention,
including preparatory work for the per-network namespace RTNL lock,
replacing RTNL lock with a per device-one to protect NAPI-related
net device data and moving synchronize_net() calls outside such
lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge and
more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter
---------
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on
each restart.
Protocols
---------
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets,
to avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel
TLS (for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API
----------
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling
-----------------
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec,
to ease maintenance and future development.
- Add YNL support for decoding the link types used in net
self-tests, allowing a single build to run both net and
drivers/net.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues, affecting
both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station mode
support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hrsp
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.
Core:
- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter:
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.
Protocols:
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API:
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling:
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.
- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"
* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...
|
||
|
Linus Torvalds
|
e3610441d1 |
Rust changes for v6.14
Toolchain and infrastructure:
- Finish the move to custom FFI integer types started in the previous
cycle and finally map 'long' to 'isize' and 'char' to 'u8'. Do a few
cleanups on top thanks to that.
- Start to use 'derive(CoercePointee)' on Rust >= 1.84.0.
This is a major milestone on the path to build the kernel using only
stable Rust features. In particular, previously we were using the
unstable features 'coerce_unsized', 'dispatch_from_dyn' and 'unsize',
and now we will use the new 'derive_coerce_pointee' one, which is on
track to stabilization. This new feature is a macro that essentially
expands into code that internally uses the unstable features that we
were using before, without having to expose those.
With it, stable Rust users, including the kernel, will be able to
build custom smart pointers that work with trait objects, e.g.:
fn f(p: &Arc<dyn Display>) {
pr_info!("{p}\n");
}
let a: Arc<dyn Display> = Arc::new(42i32, GFP_KERNEL)?;
let b: Arc<dyn Display> = Arc::new("hello there", GFP_KERNEL)?;
f(&a); // Prints "42".
f(&b); // Prints "hello there".
Together with the 'arbitrary_self_types' feature that we started
using in the previous cycle, using our custom smart pointers like
'Arc' will eventually only rely in stable Rust.
- Introduce 'PROCMACROLDFLAGS' environment variable to allow to link
Rust proc macros using different flags than those used for linking
Rust host programs (e.g. when 'rustc' uses a different C library
than the host programs' one), which Android needs.
- Help kernel builds under macOS with Rust enabled by accomodating
other naming conventions for dynamic libraries (i.e. '.so' vs.
'.dylib') which are used for Rust procedural macros. The actual
support for macOS (i.e. the rest of the pieces needed) is provided
out-of-tree by others, following the policy used for other parts of
the kernel by Kbuild.
- Run Clippy for 'rusttest' code too and clean the bits it spotted.
- Provide Clippy with the minimum supported Rust version to improve
the suggestions it gives.
- Document 'bindgen' 0.71.0 regression.
'kernel' crate:
- 'build_error!': move users of the hidden function to the documented
macro, prevent such uses in the future by moving the function
elsewhere and add the macro to the prelude.
- 'types' module: add improved version of 'ForeignOwnable::borrow_mut'
(which was removed in the past since it was problematic); change
'ForeignOwnable' pointer type to '*mut'.
- 'alloc' module: implement 'Display' for 'Box' and align the 'Debug'
implementation to it; add example (doctest) for 'ArrayLayout::new()'.
- 'sync' module: document 'PhantomData' in 'Arc'; use
'NonNull::new_unchecked' in 'ForeignOwnable for Arc' impl.
- 'uaccess' module: accept 'Vec's with different allocators in
'UserSliceReader::read_all'.
- 'workqueue' module: enable run-testing a couple more doctests.
- 'error' module: simplify 'from_errno()'.
- 'block' module: fix formatting in code documentation (a lint to catch
these is being implemented).
- Avoid 'unwrap()'s in doctests, which also improves the examples by
showing how kernel code is supposed to be written.
- Avoid 'as' casts with 'cast{,_mut}' calls which are a bit safer.
And a few other cleanups.
-----BEGIN PGP SIGNATURE-----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=VLNX
-----END PGP SIGNATURE-----
Merge tag 'rust-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Finish the move to custom FFI integer types started in the previous
cycle and finally map 'long' to 'isize' and 'char' to 'u8'. Do a
few cleanups on top thanks to that.
- Start to use 'derive(CoercePointee)' on Rust >= 1.84.0.
This is a major milestone on the path to build the kernel using
only stable Rust features. In particular, previously we were using
the unstable features 'coerce_unsized', 'dispatch_from_dyn' and
'unsize', and now we will use the new 'derive_coerce_pointee' one,
which is on track to stabilization. This new feature is a macro
that essentially expands into code that internally uses the
unstable features that we were using before, without having to
expose those.
With it, stable Rust users, including the kernel, will be able to
build custom smart pointers that work with trait objects, e.g.:
fn f(p: &Arc<dyn Display>) {
pr_info!("{p}\n");
}
let a: Arc<dyn Display> = Arc::new(42i32, GFP_KERNEL)?;
let b: Arc<dyn Display> = Arc::new("hello there", GFP_KERNEL)?;
f(&a); // Prints "42".
f(&b); // Prints "hello there".
Together with the 'arbitrary_self_types' feature that we started
using in the previous cycle, using our custom smart pointers like
'Arc' will eventually only rely in stable Rust.
- Introduce 'PROCMACROLDFLAGS' environment variable to allow to link
Rust proc macros using different flags than those used for linking
Rust host programs (e.g. when 'rustc' uses a different C library
than the host programs' one), which Android needs.
- Help kernel builds under macOS with Rust enabled by accomodating
other naming conventions for dynamic libraries (i.e. '.so' vs.
'.dylib') which are used for Rust procedural macros. The actual
support for macOS (i.e. the rest of the pieces needed) is provided
out-of-tree by others, following the policy used for other parts of
the kernel by Kbuild.
- Run Clippy for 'rusttest' code too and clean the bits it spotted.
- Provide Clippy with the minimum supported Rust version to improve
the suggestions it gives.
- Document 'bindgen' 0.71.0 regression.
'kernel' crate:
- 'build_error!': move users of the hidden function to the documented
macro, prevent such uses in the future by moving the function
elsewhere and add the macro to the prelude.
- 'types' module: add improved version of 'ForeignOwnable::borrow_mut'
(which was removed in the past since it was problematic); change
'ForeignOwnable' pointer type to '*mut'.
- 'alloc' module: implement 'Display' for 'Box' and align the 'Debug'
implementation to it; add example (doctest) for 'ArrayLayout::new()'
- 'sync' module: document 'PhantomData' in 'Arc'; use
'NonNull::new_unchecked' in 'ForeignOwnable for Arc' impl.
- 'uaccess' module: accept 'Vec's with different allocators in
'UserSliceReader::read_all'.
- 'workqueue' module: enable run-testing a couple more doctests.
- 'error' module: simplify 'from_errno()'.
- 'block' module: fix formatting in code documentation (a lint to catch
these is being implemented).
- Avoid 'unwrap()'s in doctests, which also improves the examples by
showing how kernel code is supposed to be written.
- Avoid 'as' casts with 'cast{,_mut}' calls which are a bit safer.
And a few other cleanups"
* tag 'rust-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (32 commits)
kbuild: rust: add PROCMACROLDFLAGS
rust: uaccess: generalize userSliceReader to support any Vec
rust: kernel: add improved version of `ForeignOwnable::borrow_mut`
rust: kernel: reorder `ForeignOwnable` items
rust: kernel: change `ForeignOwnable` pointer to mut
rust: arc: split unsafe block, add missing comment
rust: types: avoid `as` casts
rust: arc: use `NonNull::new_unchecked`
rust: use derive(CoercePointee) on rustc >= 1.84.0
rust: alloc: add doctest for `ArrayLayout::new()`
rust: init: update `stack_try_pin_init` examples
rust: error: import `kernel`'s `LayoutError` instead of `core`'s
rust: str: replace unwraps with question mark operators
rust: page: remove unnecessary helper function from doctest
rust: rbtree: remove unwrap in asserts
rust: init: replace unwraps with question mark operators
rust: use host dylib naming convention to support macOS
rust: add `build_error!` to the prelude
rust: kernel: move `build_error` hidden function to prevent mistakes
rust: use the `build_error!` macro, not the hidden function
...
|
||
|
Miguel Ojeda
|
4401565fe9 |
rust: add build_error! to the prelude
The sibling `build_assert!` is already in the prelude, it makes sense that a "core"/"language" facility like this is part of the prelude and users should not be defining their own one (thus there should be no risk of future name collisions and we would want to be aware of them anyway). Thus add `build_error!` into the prelude. Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20241123222849.350287-3-ojeda@kernel.org [ Applied the change to the new miscdevice cases. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Miguel Ojeda
|
15f2f9313a |
rust: use the build_error! macro, not the hidden function
Code and some examples were using the function, rather than the macro. The macro is what is documented. Thus move users to the macro. Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20241123222849.350287-1-ojeda@kernel.org [ Applied the change to the new miscdevice cases. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Jakub Kicinski
|
07e5c4eb94 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.13-rc4). No conflicts. Adjacent changes: drivers/net/ethernet/renesas/rswitch.h |
||
|
Rahul Rameshbabu
|
d22f955cc2 |
rust: net::phy scope ThisModule usage in the module_phy_driver macro
Similar to the use of $crate::Module, ThisModule should be referred to as $crate::ThisModule in the macro evaluation. The reason the macro previously did not cause any errors is because all the users of the macro would use kernel::prelude::*, bringing ThisModule into scope. Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com> Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://patch.msgid.link/20241214194242.19505-1-sergeantsagara@protonmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
FUJITA Tomonori
|
94901b7a74 |
rust: net::phy fix module autoloading
The alias symbol name was renamed. Adjust module_phy_driver macro to
create the proper symbol name to fix module autoloading.
Fixes:
|
||
|
Linus Torvalds
|
798bb342e0 |
Rust changes for v6.13
Toolchain and infrastructure:
- Enable a series of lints, including safety-related ones, e.g. the
compiler will now warn about missing safety comments, as well as
unnecessary ones. How safety documentation is organized is a frequent
source of review comments, thus having the compiler guide new
developers on where they are expected (and where not) is very nice.
- Start using '#[expect]': an interesting feature in Rust (stabilized
in 1.81.0) that makes the compiler warn if an expected warning was
_not_ emitted. This is useful to avoid forgetting cleaning up locally
ignored diagnostics ('#[allow]'s).
- Introduce '.clippy.toml' configuration file for Clippy, the Rust
linter, which will allow us to tweak its behaviour. For instance, our
first use cases are declaring a disallowed macro and, more
importantly, enabling the checking of private items.
- Lints-related fixes and cleanups related to the items above.
- Migrate from 'receiver_trait' to 'arbitrary_self_types': to get the
kernel into stable Rust, one of the major pieces of the puzzle is the
support to write custom types that can be used as 'self', i.e. as
receivers, since the kernel needs to write types such as 'Arc' that
common userspace Rust would not. 'arbitrary_self_types' has been
accepted to become stable, and this is one of the steps required to
get there.
- Remove usage of the 'new_uninit' unstable feature.
- Use custom C FFI types. Includes a new 'ffi' crate to contain our
custom mapping, instead of using the standard library 'core::ffi'
one. The actual remapping will be introduced in a later cycle.
- Map '__kernel_{size_t,ssize_t,ptrdiff_t}' to 'usize'/'isize' instead
of 32/64-bit integers.
- Fix 'size_t' in bindgen generated prototypes of C builtins.
- Warn on bindgen < 0.69.5 and libclang >= 19.1 due to a double issue
in the projects, which we managed to trigger with the upcoming
tracepoint support. It includes a build test since some distributions
backported the fix (e.g. Debian -- thanks!). All major distributions
we list should be now OK except Ubuntu non-LTS.
'macros' crate:
- Adapt the build system to be able run the doctests there too; and
clean up and enable the corresponding doctests.
'kernel' crate:
- Add 'alloc' module with generic kernel allocator support and remove
the dependency on the Rust standard library 'alloc' and the extension
traits we used to provide fallible methods with flags.
Add the 'Allocator' trait and its implementations '{K,V,KV}malloc'.
Add the 'Box' type (a heap allocation for a single value of type 'T'
that is also generic over an allocator and considers the kernel's GFP
flags) and its shorthand aliases '{K,V,KV}Box'. Add 'ArrayLayout'
type. Add 'Vec' (a contiguous growable array type) and its shorthand
aliases '{K,V,KV}Vec', including iterator support.
For instance, now we may write code such as:
let mut v = KVec::new();
v.push(1, GFP_KERNEL)?;
assert_eq!(&v, &[1]);
Treewide, move as well old users to these new types.
- 'sync' module: add global lock support, including the
'GlobalLockBackend' trait; the 'Global{Lock,Guard,LockedBy}' types
and the 'global_lock!' macro. Add the 'Lock::try_lock' method.
- 'error' module: optimize 'Error' type to use 'NonZeroI32' and make
conversion functions public.
- 'page' module: add 'page_align' function.
- Add 'transmute' module with the existing 'FromBytes' and 'AsBytes'
traits.
- 'block::mq::request' module: improve rendered documentation.
- 'types' module: extend 'Opaque' type documentation and add simple
examples for the 'Either' types.
drm/panic:
- Clean up a series of Clippy warnings.
Documentation:
- Add coding guidelines for lints and the '#[expect]' feature.
- Add Ubuntu to the list of distributions in the Quick Start guide.
MAINTAINERS:
- Add Danilo Krummrich as maintainer of the new 'alloc' module.
And a few other small cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=Kn7b
-----END PGP SIGNATURE-----
Merge tag 'rust-6.13' of https://github.com/Rust-for-Linux/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Enable a series of lints, including safety-related ones, e.g. the
compiler will now warn about missing safety comments, as well as
unnecessary ones. How safety documentation is organized is a
frequent source of review comments, thus having the compiler guide
new developers on where they are expected (and where not) is very
nice.
- Start using '#[expect]': an interesting feature in Rust (stabilized
in 1.81.0) that makes the compiler warn if an expected warning was
_not_ emitted. This is useful to avoid forgetting cleaning up
locally ignored diagnostics ('#[allow]'s).
- Introduce '.clippy.toml' configuration file for Clippy, the Rust
linter, which will allow us to tweak its behaviour. For instance,
our first use cases are declaring a disallowed macro and, more
importantly, enabling the checking of private items.
- Lints-related fixes and cleanups related to the items above.
- Migrate from 'receiver_trait' to 'arbitrary_self_types': to get the
kernel into stable Rust, one of the major pieces of the puzzle is
the support to write custom types that can be used as 'self', i.e.
as receivers, since the kernel needs to write types such as 'Arc'
that common userspace Rust would not. 'arbitrary_self_types' has
been accepted to become stable, and this is one of the steps
required to get there.
- Remove usage of the 'new_uninit' unstable feature.
- Use custom C FFI types. Includes a new 'ffi' crate to contain our
custom mapping, instead of using the standard library 'core::ffi'
one. The actual remapping will be introduced in a later cycle.
- Map '__kernel_{size_t,ssize_t,ptrdiff_t}' to 'usize'/'isize'
instead of 32/64-bit integers.
- Fix 'size_t' in bindgen generated prototypes of C builtins.
- Warn on bindgen < 0.69.5 and libclang >= 19.1 due to a double issue
in the projects, which we managed to trigger with the upcoming
tracepoint support. It includes a build test since some
distributions backported the fix (e.g. Debian -- thanks!). All
major distributions we list should be now OK except Ubuntu non-LTS.
'macros' crate:
- Adapt the build system to be able run the doctests there too; and
clean up and enable the corresponding doctests.
'kernel' crate:
- Add 'alloc' module with generic kernel allocator support and remove
the dependency on the Rust standard library 'alloc' and the
extension traits we used to provide fallible methods with flags.
Add the 'Allocator' trait and its implementations '{K,V,KV}malloc'.
Add the 'Box' type (a heap allocation for a single value of type
'T' that is also generic over an allocator and considers the
kernel's GFP flags) and its shorthand aliases '{K,V,KV}Box'. Add
'ArrayLayout' type. Add 'Vec' (a contiguous growable array type)
and its shorthand aliases '{K,V,KV}Vec', including iterator
support.
For instance, now we may write code such as:
let mut v = KVec::new();
v.push(1, GFP_KERNEL)?;
assert_eq!(&v, &[1]);
Treewide, move as well old users to these new types.
- 'sync' module: add global lock support, including the
'GlobalLockBackend' trait; the 'Global{Lock,Guard,LockedBy}' types
and the 'global_lock!' macro. Add the 'Lock::try_lock' method.
- 'error' module: optimize 'Error' type to use 'NonZeroI32' and make
conversion functions public.
- 'page' module: add 'page_align' function.
- Add 'transmute' module with the existing 'FromBytes' and 'AsBytes'
traits.
- 'block::mq::request' module: improve rendered documentation.
- 'types' module: extend 'Opaque' type documentation and add simple
examples for the 'Either' types.
drm/panic:
- Clean up a series of Clippy warnings.
Documentation:
- Add coding guidelines for lints and the '#[expect]' feature.
- Add Ubuntu to the list of distributions in the Quick Start guide.
MAINTAINERS:
- Add Danilo Krummrich as maintainer of the new 'alloc' module.
And a few other small cleanups and fixes"
* tag 'rust-6.13' of https://github.com/Rust-for-Linux/linux: (82 commits)
rust: alloc: Fix `ArrayLayout` allocations
docs: rust: remove spurious item in `expect` list
rust: allow `clippy::needless_lifetimes`
rust: warn on bindgen < 0.69.5 and libclang >= 19.1
rust: use custom FFI integer types
rust: map `__kernel_size_t` and friends also to usize/isize
rust: fix size_t in bindgen prototypes of C builtins
rust: sync: add global lock support
rust: macros: enable the rest of the tests
rust: macros: enable paste! use from macro_rules!
rust: enable macros::module! tests
rust: kbuild: expand rusttest target for macros
rust: types: extend `Opaque` documentation
rust: block: fix formatting of `kernel::block::mq::request` module
rust: macros: fix documentation of the paste! macro
rust: kernel: fix THIS_MODULE header path in ThisModule doc comment
rust: page: add Rust version of PAGE_ALIGN
rust: helpers: remove unnecessary header includes
rust: exports: improve grammar in commentary
drm/panic: allow verbose version check
...
|
||
|
Gary Guo
|
d072acda48 |
rust: use custom FFI integer types
Currently FFI integer types are defined in libcore. This commit creates the `ffi` crate and asks bindgen to use that crate for FFI integer types instead of `core::ffi`. This commit is preparatory and no type changes are made in this commit yet. Signed-off-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240913213041.395655-4-gary@garyguo.net [ Added `rustdoc`, `rusttest` and KUnit tests support. Rebased on top of `rust-next` (e.g. migrated more `core::ffi` cases). Reworded crate docs slightly and formatted. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
FUJITA Tomonori
|
3ed8d344e0 |
rust: net::phy always define device_table in module_phy_driver macro
device_table in module_phy_driver macro is defined only when the
driver is built as a module. So a PHY driver imports phy::DeviceId
module in the following way then hits `unused import` warning when
it's compiled as built-in:
use kernel::net::phy::DeviceId;
kernel::module_phy_driver! {
drivers: [PhyQT2025],
device_table: [
DeviceId::new_with_driver::<PhyQT2025>(),
],
Put device_table in a const. It's not included in the kernel image if
unused (when the driver is compiled as built-in), and the compiler
doesn't complain.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20240930134038.1309-1-fujita.tomonori@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Jakub Kicinski
|
502cc061de |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/phy/phy_device.c |
||
|
FUJITA Tomonori
|
5114e05a3c |
rust: net::phy unified genphy_read_status function for C22 and C45 registers
Add unified genphy_read_status function for C22 and C45 registers. Instead of having genphy_c22 and genphy_c45 methods, this unifies genphy_read_status functions for C22 and C45. Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
FUJITA Tomonori
|
b2e47002b2 |
rust: net::phy unified read/write API for C22 and C45 registers
Add the unified read/write API for C22 and C45 registers. The abstractions support access to only C22 registers now. Instead of adding read/write_c45 methods specifically for C45, a new reg module supports the unified API to access C22 and C45 registers with trait, by calling an appropriate phylib functions. Reviewed-by: Trevor Gross <tmgross@umich.edu> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
FUJITA Tomonori
|
7909892a9f |
rust: net::phy implement AsRef<kernel::device::Device> trait
Implement AsRef<kernel::device::Device> trait for Device. A PHY driver needs a reference to device::Device to call the firmware API. Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Trevor Gross <tmgross@umich.edu> Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
FUJITA Tomonori
|
ffd2747de6 |
rust: net::phy support probe callback
Support phy_driver probe callback, used to set up device-specific structures. Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Trevor Gross <tmgross@umich.edu> Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Michael Vetter
|
0ff8f3f097 |
rust: kernel: fix typos in code comments
Fix spelling mistakes in code comments. Signed-off-by: Michael Vetter <jubalh@iodoru.org> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Link: https://lore.kernel.org/r/20240819205731.2163-1-jubalh@iodoru.org [ Reworded slightly. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
Linus Torvalds
|
8f5b5f7811 |
Rust changes for v6.10
The most notable change is the drop of the 'alloc' in-tree fork. This is nicely reflected in the diffstat as a ~10k lines drop. In turn, this makes the version upgrades way simpler and smaller in the future, e.g. the latest one in commit |
||
|
Miguel Ojeda
|
00280272a0 |
rust: kernel: remove redundant imports
Rust's `unused_imports` lint covers both unused and redundant imports.
In the upcoming 1.78.0, the lint detects more cases of redundant imports
[1], e.g.:
error: the item `bindings` is imported redundantly
--> rust/kernel/print.rs:38:9
|
38 | use crate::bindings;
| ^^^^^^^^^^^^^^^ the item `bindings` is already defined by prelude
Most cases are `use crate::bindings`, plus a few other items like `Box`.
Thus clean them up.
Note that, in the `bindings` case, the message "defined by prelude"
above means the extern prelude, i.e. the `--extern` flags we pass.
Link: https://github.com/rust-lang/rust/pull/117772 [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240401212303.537355-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
||
|
Wedson Almeida Filho
|
df70d04d56 |
rust: phy: implement Send for Registration
In preparation for requiring `Send` for `Module` implementations in the next patch. Cc: FUJITA Tomonori <fujita.tomonori@gmail.com> Cc: Trevor Gross <tmgross@umich.edu> Cc: netdev@vger.kernel.org Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240328195457.225001-2-wedsonaf@gmail.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org> |
||
|
FUJITA Tomonori
|
599b75a3b7 |
rust: phy: use VTABLE_DEFAULT_ERROR
Since 6.8-rc1, using VTABLE_DEFAULT_ERROR for optional functions (never called) in #[vtable] is the recommended way. Note that no functional changes in this patch. Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
FUJITA Tomonori
|
1d4046b571 |
rust: phy: use srctree-relative links
The relative paths like the following are bothersome and don't work with `O=` builds: //! C headers: [`include/linux/phy.h`](../../../../../../../include/linux/phy.h). This updates such links by using the `srctree`-relative link feature introduced in 6.8-rc1 like: //! C headers: [`include/linux/phy.h`](srctree/include/linux/phy.h). Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
FUJITA Tomonori
|
2fe11d5ab3 |
rust: net::phy add module_phy_driver macro
This macro creates an array of kernel's `struct phy_driver` and registers it. This also corresponds to the kernel's `MODULE_DEVICE_TABLE` macro, which embeds the information for module loading into the module binary file. A PHY driver should use this macro. Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Benno Lossin <benno.lossin@proton.me> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Trevor Gross <tmgross@umich.edu> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
FUJITA Tomonori
|
f20fd5449a |
rust: core abstractions for network PHY drivers
This patch adds abstractions to implement network PHY drivers; the driver registration and bindings for some of callback functions in struct phy_driver and many genphy_ functions. This feature is enabled with CONFIG_RUST_PHYLIB_ABSTRACTIONS=y. This patch enables unstable const_maybe_uninit_zeroed feature for kernel crate to enable unsafe code to handle a constant value with uninitialized data. With the feature, the abstractions can initialize a phy_driver structure with zero easily; instead of initializing all the members by hand. It's supposed to be stable in the not so distant future. Link: https://github.com/rust-lang/rust/pull/116218 Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |