If this action frame, with the value of IEEE80211_HT_CHANWIDTH_ANY,
arrives right after a beacon that changed the operational bandwidth from
20 MHz to 40 MHz, then updating the rate control bandwidth to 40 can
race with updating the chanctx width (that happens in the beacon
proccesing) back to 40 MHz:
cpu0 cpu1
ieee80211_rx_mgmt_beacon
ieee80211_config_bw
ieee80211_link_change_chanreq
(*)ieee80211_link_update_chanreq
ieee80211_rx_h_action
(**)ieee80211_sta_cur_vht_bw
(***) ieee80211_recalc_chanctx_chantype
in (**), the maximum between the capability width and the bss width is
returned. But the bss width was just updated to 40 in (*),
so the action frame handling code will increase the width of the rate
control before the chanctx was increased (in ***), leading to a FW error
(at least in iwlwifi driver. But this is wrong regardless).
Fix this by simply handling the action frame async, so it won't race
with the beacon proccessing.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218632
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.bb9dc6f36c35.I39782d6077424e075974c3bee4277761494a1527@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR (net-6.16-rc6-2).
No conflicts.
Adjacent changes:
drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
c701574c54 ("wifi: mt76: mt7925: fix invalid array index in ssid assignment during hw scan")
b3a431fe2e ("wifi: mt76: mt7925: fix off by one in mt7925_mcu_hw_scan()")
drivers/net/wireless/mediatek/mt76/mt7996/mac.c
62da647a2b ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()")
dc66a129ad ("wifi: mt76: add a wrapper for wcid access with validation")
drivers/net/wireless/mediatek/mt76/mt7996/main.c
3dd6f67c66 ("wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl()")
8989d8e90f ("wifi: mt76: mt7996: Do not set wcid.sta to 1 in mt7996_mac_sta_event()")
net/mac80211/cfg.c
58fcb1b428 ("wifi: mac80211: reject VHT opmode for unsupported channel widths")
037dc18ac3 ("wifi: mac80211: add support for storing station S1G capabilities")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is currently not initialized for a virtual monitor, leading to a
NULL pointer dereference when - for example - iterating over all the
keys of all the vifs.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233400.8dcefe578497.I4c90a00ae3256520e063199d7f6f2580d5451acf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, per-radio attributes are set on per-phy basis, i.e., all the
radios present in a wiphy will take attributes values sent from user. But
each radio in a wiphy can get different values from userspace based on
its requirement.
To extend support to set per-radio attributes, add support to get radio
index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX,
to get user specified radio index for which attributes should be changed.
Pass this to individual drivers, so that the drivers can use this radio
index to change per-radio attributes when necessary. Currently, per-radio
attributes identified are:
NL80211_ATTR_WIPHY_TX_POWER_LEVEL
NL80211_ATTR_WIPHY_ANTENNA_TX
NL80211_ATTR_WIPHY_ANTENNA_RX
NL80211_ATTR_WIPHY_RETRY_SHORT
NL80211_ATTR_WIPHY_RETRY_LONG
NL80211_ATTR_WIPHY_FRAG_THRESHOLD
NL80211_ATTR_WIPHY_RTS_THRESHOLD
NL80211_ATTR_WIPHY_COVERAGE_CLASS
NL80211_ATTR_TXQ_LIMIT
NL80211_ATTR_TXQ_MEMORY_LIMIT
NL80211_ATTR_TXQ_QUANTUM
By default, the radio index is set to -1. This means the attribute should
be treated as a global configuration. If the user has not specified any
index, then the radio index passed to individual drivers would be -1. This
would indicate that the attribute applies to all radios in that wiphy.
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For MBSSID, each vif (struct ieee80211_vif) stores another vif
pointer for the transmitting profile of MBSSID set. This won't
suffice for MLO as there may be multiple links, each of which can
be part of different MBSSID sets. Hence the information needs to
be stored per-link. Additionally, the transmitted profile itself
may be part of an MLD hence storing vif will not suffice either.
Fix MLO by storing an instance of struct ieee80211_bss_conf
for each link.
Modify following operations to reflect the above structure updates:
- channel switch completion
- BSS color change completion
- Removing nontransmitted links in ieee80211_stop_mbssid()
- drivers retrieving the transmitted link for beacon templates.
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Co-developed-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408184501.3715887-3-aloka.dixit@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, MLD links for an AP_VLAN interface type is not fully
supported.
Add allocation of separate links for each VLAN interface and copy
chanctx and chandef of AP bss to VLAN where necessary. Separate
links are created because for Dynamic VLAN each link will have its own
default_multicast_key.
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Link: https://patch.msgid.link/20250325213125.1509362-3-muna.sinada@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- iwlwifi: various build warning fixes (e.g. PM_SLEEP)
- iwlwifi: fix operation when FW reset handshake times out
- mac80211: drop pending frames on interface down
-----BEGIN PGP SIGNATURE-----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=FdK4
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-04-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a handful of fixes, notably
- iwlwifi: various build warning fixes (e.g. PM_SLEEP)
- iwlwifi: fix operation when FW reset handshake times out
- mac80211: drop pending frames on interface down
* tag 'wireless-2025-04-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
Revert "wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()"
wifi: iwlwifi: mld: Restart firmware on iwl_mld_no_wowlan_resume() error
wifi: iwlwifi: pcie: set state to no-FW before reset handshake
wifi: wl1251: fix memory leak in wl1251_tx_work
wifi: brcmfmac: fix memory leak in brcmf_get_module_param
wifi: iwlwifi: mld: silence uninitialized variable warning
wifi: mac80211: Purge vif txq in ieee80211_do_stop()
wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()
wifi: at76c50x: fix use after free access in at76_disconnect
wifi: add wireless list to MAINTAINERS
iwlwifi: mld: fix building with CONFIG_PM_SLEEP disabled
wifi: iwlwifi: mld: fix PM_SLEEP -Wundef warning
wifi: iwlwifi: mld: reduce scope for uninitialized variable
====================
Link: https://patch.msgid.link/20250411142354.24419-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After ieee80211_do_stop() SKB from vif's txq could still be processed.
Indeed another concurrent vif schedule_and_wake_txq call could cause
those packets to be dequeued (see ieee80211_handle_wake_tx_queue())
without checking the sdata current state.
Because vif.drv_priv is now cleared in this function, this could lead to
driver crash.
For example in ath12k, ahvif is store in vif.drv_priv. Thus if
ath12k_mac_op_tx() is called after ieee80211_do_stop(), ahvif->ah can be
NULL, leading the ath12k_warn(ahvif->ah,...) call in this function to
trigger the NULL deref below.
Unable to handle kernel paging request at virtual address dfffffc000000001
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
batman_adv: bat0: Interface deactivated: brbh1337
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[dfffffc000000001] address between user and kernel address ranges
Internal error: Oops: 0000000096000004 [#1] SMP
CPU: 1 UID: 0 PID: 978 Comm: lbd Not tainted 6.13.0-g633f875b8f1e #114
Hardware name: HW (DT)
pstate: 10000005 (nzcV daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k]
lr : ath12k_mac_op_tx+0x174/0x29b8 [ath12k]
sp : ffffffc086ace450
x29: ffffffc086ace450 x28: 0000000000000000 x27: 1ffffff810d59ca4
x26: ffffff801d05f7c0 x25: 0000000000000000 x24: 000000004000001e
x23: ffffff8009ce4926 x22: ffffff801f9c0800 x21: ffffff801d05f7f0
x20: ffffff8034a19f40 x19: 0000000000000000 x18: ffffff801f9c0958
x17: ffffff800bc0a504 x16: dfffffc000000000 x15: ffffffc086ace4f8
x14: ffffff801d05f83c x13: 0000000000000000 x12: ffffffb003a0bf03
x11: 0000000000000000 x10: ffffffb003a0bf02 x9 : ffffff8034a19f40
x8 : ffffff801d05f818 x7 : 1ffffff0069433dc x6 : ffffff8034a19ee0
x5 : ffffff801d05f7f0 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000000 x1 : dfffffc000000000 x0 : 0000000000000008
Call trace:
ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k] (P)
ieee80211_handle_wake_tx_queue+0x16c/0x260
ieee80211_queue_skb+0xeec/0x1d20
ieee80211_tx+0x200/0x2c8
ieee80211_xmit+0x22c/0x338
__ieee80211_subif_start_xmit+0x7e8/0xc60
ieee80211_subif_start_xmit+0xc4/0xee0
__ieee80211_subif_start_xmit_8023.isra.0+0x854/0x17a0
ieee80211_subif_start_xmit_8023+0x124/0x488
dev_hard_start_xmit+0x160/0x5a8
__dev_queue_xmit+0x6f8/0x3120
br_dev_queue_push_xmit+0x120/0x4a8
__br_forward+0xe4/0x2b0
deliver_clone+0x5c/0xd0
br_flood+0x398/0x580
br_dev_xmit+0x454/0x9f8
dev_hard_start_xmit+0x160/0x5a8
__dev_queue_xmit+0x6f8/0x3120
ip6_finish_output2+0xc28/0x1b60
__ip6_finish_output+0x38c/0x638
ip6_output+0x1b4/0x338
ip6_local_out+0x7c/0xa8
ip6_send_skb+0x7c/0x1b0
ip6_push_pending_frames+0x94/0xd0
rawv6_sendmsg+0x1a98/0x2898
inet_sendmsg+0x94/0xe0
__sys_sendto+0x1e4/0x308
__arm64_sys_sendto+0xc4/0x140
do_el0_svc+0x110/0x280
el0_svc+0x20/0x60
el0t_64_sync_handler+0x104/0x138
el0t_64_sync+0x154/0x158
To avoid that, empty vif's txq at ieee80211_do_stop() so no packet could
be dequeued after ieee80211_do_stop() (new packets cannot be queued
because SDATA_STATE_RUNNING is cleared at this point).
Fixes: ba8c3d6f16 ("mac80211: add an intermediate software queue implementation")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://patch.msgid.link/ff7849e268562456274213c0476e09481a48f489.1742833382.git.repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
net/ethtool/cabletest.c
2bcf4772e4 ("net: ethtool: try to protect all callback with netdev instance lock")
637399bf7e ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device")
No Adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Count open monitor interfaces regardless of the monitor interface type.
The new counter virt_monitors takes over counting interfaces depending
on the virtual monitor interface while monitors is used for all active
monitor interfaces.
This fixes monitor packet mirroring when using MONITOR_FLAG_ACTIVE or
NO_VIRTUAL_MONITOR interfaces.
Fixes: 286e696770 ("wifi: mac80211: Drop cooked monitor support")
Reported-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Closes: https://lore.kernel.org/r/cc715114-4e3b-619a-49dc-a4878075e1dc@quicinc.com
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Tested-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20250220094139.61459-1-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Don't call ieee80211_debugfs_recreate_netdev() for virtual monitor
interface when deleting it.
The virtual monitor interface shouldn't have debugfs entries and trying
to update them will *create* them on deletion.
And when the virtual monitor interface is created/destroyed multiple
times we'll get warnings about debugfs name conflicts.
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Link: https://patch.msgid.link/20250204164240.370153-1-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This wiphy work is canceled when the iface is stopped,
and shouldn't be queued for a non-running iface.
If it happens to be queued for a non-running iface (due to a bug)
it can cause a corruption of wiphy_work_list when ieee80211_setup_sdata
is called. Make sure to cancel it in this case and warn on.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250205110958.99204c767c10.I84ce27a239059f6009cee197b252549a11426046@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add processing of negotiated TTLM tear down frame.
Handle this frame similar to the way a locally initiated
tear down is handled.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.860691076786.I32df71182c25c5f84e4534f40efe1316926b8249@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for configuring EPCS state:
- When EPCS is enabled, send an EPCS enable request action frame
to the AP. When the AP replies with EPCS enable response, enable
EPCS by applying the QoS parameters provided by the AP. Do so for
all the valid MLD links. Once EPCS is enabled, support processing
of unsolicited EPCS enable response frames.
- When EPCS is disabled, send an EPCS teardown request to the AP
and apply the QoS parameters as obtained from the last received
beacons. Do so for all the valid links.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.7a90afd7e140.I3f602d65f5c1fd849d6c70b12307dda33aa91ccb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Hostapd switched from cooked monitor interfaces to nl80211 Dec 2011.
Drop support for the outdated cooked monitor interfaces and fix
creating the virtual monitor interfaces in the following cases:
1) We have one non-monitor and one monitor interface with
%MONITOR_FLAG_ACTIVE enabled and then delete the non-monitor
interface.
2) We only have monitor interfaces enabled on resume while at least one
has %MONITOR_FLAG_ACTIVE set.
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Link: https://patch.msgid.link/20250204111352.7004-2-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for adding and removing station links:
- Adding links is done asynchronously, i.e., first
an ML reconfiguration action frame is sent to the AP
requesting to add links, and only when the AP replies,
links which were added successfully by the AP are added
locally.
- Removing links is done synchronously, i.e., the links
are removed before sending the ML reconfiguration
action frame to the AP (to avoid using this links after
the AP MLD removed them but before the station got the
ML reconfiguration response). In case the AP replies with a
status indicating that a link removal was not successful,
disconnect (as this should not happen an is an indication
that something might be wrong on the AP MLD).
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.ec0492a8dd21.I2869686642bbc0f86c40f284ebf7e6f644b551ab@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Multi-Link Operation implementation continues, both in stack and in
drivers. Otherwise it has been relatively quiet.
Major changes:
cfg80211/mac80211
* define wiphy guard
* get TX power per link
* EHT 320 MHz channel support for mesh
ath11k
* QCA6698AQ support
ath9k
* RX inactivity detection
rtl8xxxu
* add more USB device IDs
rtw88
* add more USB device IDs
* enable USB RX aggregation and USB 3 to improve performance
rtw89
* PowerSave flow for Multi-Link Operation
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmdkbAoRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuRIgf/dcjYr+eg3I7iU9qGxvEwHlDAC5CaMRwe
8+/SO6gy49xf6igleNQ2jBn/qAsJTiro6IzJwb1D6i16ax4TRUTEkTZSiYCzntKI
9Nkq59qhsRI4Vxrhp6NibUtVnjuRdSruVM5uLCccUCJ8tfq13WGhecR2pmV0TDO3
bRSza6L64XIuSmqHkuWS3Hz1YQvIvIZMeeiWoC35mtXg6ORRXpYloLtCzFn1zxoP
YPoeSfoAqIlaVwdB1DoaakU6is8oGZ0oI6zw/qaN8P7pYfqO62ATf6ZzAdwHE1dU
fow9nvwzln+BqgpdIK81QFR+XC+7LorCGSaQlYu6C0nxjSzycSrgOw==
=WIP7
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.14
Multi-Link Operation implementation continues, both in stack and in
drivers. Otherwise it has been relatively quiet.
Major changes:
cfg80211/mac80211
- define wiphy guard
- get TX power per link
- EHT 320 MHz channel support for mesh
ath11k
- QCA6698AQ support
ath9k
- RX inactivity detection
rtl8xxxu
- add more USB device IDs
rtw88
- add more USB device IDs
- enable USB RX aggregation and USB 3 to improve performance
rtw89
- PowerSave flow for Multi-Link Operation
* tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (121 commits)
wifi: wlcore: sysfs: constify 'struct bin_attribute'
wifi: brcmfmac: clarify unmodifiable headroom log message
wifi: brcmfmac: add missing header include for brcmf_dbg
wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy()
wifi: qtnfmac: fix spelling error in core.h
wifi: rtw89: phy: add dummy C2H event handler for report of TAS power
wifi: rtw89: 8851b: rfk: remove unnecessary assignment of return value of _dpk_dgain_read()
wifi: rtw89: 8852c: rfk: refine target channel calculation in _rx_dck_channel_calc()
wifi: rtlwifi: pci: wait for firmware loading before releasing memory
wifi: rtlwifi: fix memory leaks and invalid access at probe error path
wifi: rtlwifi: destroy workqueue at rtl_deinit_core
wifi: rtlwifi: remove unused check_buddy_priv
wifi: rtw89: 8922a: update format of RFK pre-notify H2C command v2
wifi: rtw89: regd: update regulatory map to R68-R51
wifi: rtw89: 8852c: disable ER SU when 4x HE-LTF and 0.8 GI capability differ
wifi: rtw89: disable firmware training HE GI and LTF
wifi: rtw89: ps: update data for firmware and settings for hardware before/after PS
wifi: rtw89: ps: refactor channel info to firmware before entering PS
wifi: rtw89: ps: refactor PS flow to support MLO
wifi: mwifiex: decrease timeout waiting for host sleep from 10s to 5s
...
====================
Link: https://patch.msgid.link/20241219185709.774EDC4CECE@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since adding support for opting out of virtual monitor support, a zero vif
addr was used to indicate passive vs active monitor to the driver.
This would break the vif->addr when changing the netdev mac address before
switching the interface from monitor to sta mode.
Fix the regression by adding a separate flag to indicate whether vif->addr
is valid.
Reported-by: syzbot+9ea265d998de25ac6a46@syzkaller.appspotmail.com
Fixes: 9d40f7e327 ("wifi: mac80211: add flag to opt out of virtual monitor support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20241115115850.37449-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we got an unprotected action frame with CSA and then we heard the
beacon with the CSA IE, we'll block the queues with the CSA reason
twice. Since this reason is refcounted, we won't wake up the queues
since we wake them up only once and the ref count will never reach 0.
This led to blocked queues that prevented any activity (even
disconnection wouldn't reset the queue state and the only way to recover
would be to reload the kernel module.
Fix this by not refcounting the CSA reason.
It becomes now pointless to maintain the csa_blocked_queues state.
Remove it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Fixes: 414e090bc4 ("wifi: mac80211: restrict public action ECSA frame handling")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219447
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241119173108.5ea90828c2cc.I4f89e58572fb71ae48e47a81e74595cac410fbac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If changed is '0', then the ieee80211_hw_config takes no
action, so just remove the call in
__ieee809211_recalc_txpower()
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20241010204036.1219896-1-greearb@candelatech.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is useful for multi-radio devices that are capable of monitoring on
multiple channels simultanenously. When this flag is set, each monitor
interface is passed to the driver individually and can have a configured
channel.
The vif mac address for non-active monitor interfaces is cleared, in order
to allow the driver to tell them apart from active ones.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/3c55505ee0cf0a5f141fbcb30d1e8be8d9f40373.1728462320.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since '__dev_queue_xmit()' should be called with interrupts enabled,
the following backtrace:
ieee80211_do_stop()
...
spin_lock_irqsave(&local->queue_stop_reason_lock, flags)
...
ieee80211_free_txskb()
ieee80211_report_used_skb()
ieee80211_report_ack_skb()
cfg80211_mgmt_tx_status_ext()
nl80211_frame_tx_status()
genlmsg_multicast_netns()
genlmsg_multicast_netns_filtered()
nlmsg_multicast_filtered()
netlink_broadcast_filtered()
do_one_broadcast()
netlink_broadcast_deliver()
__netlink_sendskb()
netlink_deliver_tap()
__netlink_deliver_tap_skb()
dev_queue_xmit()
__dev_queue_xmit() ; with IRQS disabled
...
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags)
issues the warning (as reported by syzbot reproducer):
WARNING: CPU: 2 PID: 5128 at kernel/softirq.c:362 __local_bh_enable_ip+0xc3/0x120
Fix this by implementing a two-phase skb reclamation in
'ieee80211_do_stop()', where actual work is performed
outside of a section with interrupts disabled.
Fixes: 5061b0c2b9 ("mac80211: cooperate more with network namespaces")
Reported-by: syzbot+1a3986bbd3169c307819@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1a3986bbd3169c307819
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20240906123151.351647-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, during starting a radar detection, no link id information is
parsed and passed down. In order to support starting radar detection
during Multi Link Operation, it is required to pass link id as well.
Add changes to first parse and then pass link id in the start radar
detection path.
Additionally, update notification APIs to allow drivers/mac80211 to
pass the link ID.
However, everything is handled at link 0 only until all API's are ready to
handle it per link.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-6-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A few members related to DFS handling are currently under per wireless
device data structure. However, in order to support DFS with MLO, there is
a need to have them on a per-link manner.
Hence, as a preliminary step, move members cac_started, cac_start_time
and cac_time_ms to be on a per-link basis.
Since currently, link ID is not known at all places, use default value of
0 for now.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-5-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit ce9e660ef3 ("wifi: mac80211: move radar detect work to sdata").
To enable radar detection with MLO, it’s essential to handle it on a
per-link basis. This is because when using MLO, multiple links may already
be active and beaconing. In this scenario, another link should be able to
initiate a radar detection. Also, if underlying links are associated with
different hardware devices but grouped together for MLO, they could
potentially start radar detection simultaneously. Therefore, it makes
sense to manage radar detection settings separately for each link by moving
them back to a per-link data structure.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-2-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Avoid reusing stale driver data when an interface is brought down and up
again. In order to avoid having to duplicate the memset in every single
driver, do it here.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20240704130947.48609-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 3e2f544dd8 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
In this driver specifically, .ndo_get_stats64 basically points to
dev_fetch_sw_netstats(). Now it will point to dev_get_tstats64(), which
calls netdev_stats_to_stats64() and dev_fetch_sw_netstats().
netdev_stats_to_stats64() seems irrelevant for this driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://msgid.link/20240607102045.235071-2-leitao@debian.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core instead
of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Move mac80211 driver to leverage the core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://msgid.link/20240607102045.235071-1-leitao@debian.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a monitor interface is started, ieee80211_recalc_offload() is
called and 802.11 encapsulation offloading support get disabled so
monitor interface could get native wifi frames directly. But when
this interface is stopped there is no need to keep the 802.11
encpasulation offloading off.
This call ieee80211_recalc_offload() when monitor interface is stopped
so 802.11 encapsulation offloading gets re-activated if possible.
Fixes: 6aea26ce5a ("mac80211: rework tx encapsulation offload API")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://msgid.link/840baab454f83718e6e16fd836ac597d924e85b9.1716048326.git.repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Collect the CSA data in ieee80211_link_data_managed and
ieee80211_link_data into a csa sub-struct to clean up a
bit and make adding new things more obvious.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506215543.29f954b1f576.I9a683a9647c33d4dd3011aade6677982428c1082@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
At some point we thought perhaps this could be per link, but
really that didn't happen, and it's confusing. Radar detection
still uses the deflink to allocate the channel, but the work
need not be there. Move it back.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506211311.43bd82c6da04.Ib39bec3aa198d137385f081e7e1910dcbde3aa1b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If a link switch work was queued, and then a restart happened, the
worker might be executed before the reconfig, and obviously it will fail
(the HW might not respond to updates etc.)
So, don't perform the switch if we are in reconfig, instead - do it
at the end of the reconfig.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415112355.1ef1008e3a0a.I19add3f2152dcfd55a759de97b1d09265c1cde98@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's an issue in that when we disconnect from an AP
due to the AP switching to an unsupported channel, we
might not tell the driver about this before we try to
send the deauth. If the underlying implementation has
detected the quiet CSA, this may cause issues if this
is the only active link. Avoid this by transmitting
(and flushing) the deauth only when there's an active
link available that's not affected by quiet CSA.
Since this introduces link->u.mgd.csa_blocked_tx and we
no longer check sdata->csa_blocked_tx for the TX itself
also rename the latter to csa_blocked_queues.
Fixes: 6f0107d195 ("wifi: mac80211: introduce a feature flag for quiet in CSA")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415112355.1d91db5e95aa.Iad3a5df3367f305dff48cd61776abfd6cf0fd4ab@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When doing CSA in multi-link, there really isn't a need to
stop transmissions entirely. Add a feature flag for drivers
to indicate they can handle quiet in CSA (be it by parsing
themselves, or by implementing drv_pre_channel_switch()),
to make that possible.
Also clean up the csa_block_tx handling: it clearly cannot
handle multi-link due to the way queues are stopped, move
it to the sdata. Drivers should be doing it themselves for
working properly during CSA in MLO anyway. Also rename it
to indicate that it reflects TX was blocked at mac80211.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228095719.258439191541.I2469d206e2bf5cb244cfde2b4bbc2ae6d1cd3dd9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Whenever sta_flush() function is invoked, all STAs present in that
interface are flushed. In case of MLO, it is desirable to only flush such
STAs that are at least using a given link id as one of their links.
Add support for this by making change in the __sta_info_flush API argument
to accept a link ID. And then, only if the STA is using the given link as
one of its links, it would be flushed.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240205162952.1697646-3-quic_adisi@quicinc.com
[reword commit message, in particular this isn't about "active" links]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For channel contexts, mac80211 currently uses the cfg80211
chandef struct (control channel, center freq(s), width) to
define towards drivers and internally how these behave. In
fact, there are _two_ such structs used, where the min_def
can reduce bandwidth according to the stations connected.
Unfortunately, with EHT this is longer be sufficient, at
least not for all hardware. EHT requires that non-AP STAs
that are connected to an AP with a lower bandwidth than it
(the AP) advertises (e.g. 160 MHz STA connected to 320 MHz
AP) still be able to receive downlink OFDMA and respond to
trigger frames for uplink OFDMA that specify the position
and bandwidth for the non-AP STA relative to the channel
the AP is using. Therefore, they need to be aware of this,
and at least for some hardware (e.g. Intel) this awareness
is in the hardware. As a result, use of the "same" channel
may need to be split over two channel contexts where they
differ by the AP being used.
As a first step, introduce a concept of a channel request
('chanreq') for each interface, to control the context it
requests. This step does nothing but reorganise the code,
so that later the AP's chandef can be added to the request
in order to handle the EHT case described above.
Link: https://msgid.link/20240129194108.2e88e48bd2e9.I4256183debe975c5ed71621611206fdbb69ba330@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are still surprisingly many non-chanctx drivers, but in
mac80211 that code is a bit awkward. Simplify this by having
those drivers assign 'emulated' ops, so that the mac80211 code
can be more unified between non-chanctx/chanctx drivers. This
cuts the number of places caring about it by about 15, which
are scattered across - now they're fewer and no longer in the
channel context handling.
Link: https://msgid.link/20240129194108.6d0ead50f5cf.I60d093b2fc81ca1853925a4d0ac3a2337d5baa5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are some changes coming to wireless-next that will
otherwise cause conflicts, pull wireless in first to be
able to resolve that when applying the individual changes
rather than having to do merge resolution later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
