Introduce the sb_count variable which tracks the number of
beacon intervals until the next long beacon. To initialise this
value, we find the current short beacon index into this period
which represents the number of short beacons left to send before
the next long beacon. We use the same TSF value used to initialise
the DTIM count to ensure the short beacon count and DTIM count
are in sync as its common for the long beacon period and DTIM period
to be equivalent.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250717074205.312577-4-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce the ability to parse the short beacon data and long
beacon period. The long beacon period represents the number of beacon
intervals between each long beacon transmission. Additionally,
as a BSS cannot change its configuration such that short beaconing
is dynamically disabled/enabled without tearing down the interface
- we ensure we have an existing short beacon before performing
the update.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250717074205.312577-3-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the existing macro for_each_link_data() uses sdata_dereference()
which requires the wiphy lock. This lock cannot be used in atomic or RCU
read-side contexts, such as in the RX path.
Introduce a new macro, for_each_link_data_rcu(), that iterates over link of
sdata using rcu_dereference(), making it safe to use in RCU contexts. This
allows callers to access link data without requiring the wiphy lock.
The macro takes into account the vif.valid_links bitmap and ensures only
valid links are accessed safely. Callers are responsible for ensuring that
rcu_read_lock() is held when using this macro.
Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250718060837.59371-3-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The for_each_link_data() macro currently declares a local variable
__sdata directly, which could lead to compiler warnings or errors when
reused in the same function or within switch-case blocks due to variable
redefinition or invalid scoping.
To address this, restructure the macro to use an outer for-loop that runs
only once, allowing safe declaration of __sdata without polluting the outer
scope. This ensures compatibility with static analyzers.
No functional changes; this is purely a cleanup to improve macro hygiene.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250718060837.59371-2-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The ieee80211_csa_finish() function currently uses for_each_sdata_link()
to iterate over links of sdata. However, this macro internally uses
wiphy_dereference(), which expects the wiphy->mtx lock to be held.
When ieee80211_csa_finish() is invoked under an RCU read-side critical
section (e.g., under rcu_read_lock()), this leads to a warning from the
RCU debugging framework.
WARNING: suspicious RCU usage
net/mac80211/cfg.c:3830 suspicious rcu_dereference_protected() usage!
This warning is triggered because wiphy_dereference() is not safe to use
without holding the wiphy mutex, and it is being used in an RCU context
without the required locking.
Fix this by introducing and using a new macro, for_each_sdata_link_rcu(),
which performs RCU-safe iteration over sdata links using
list_for_each_entry_rcu() and rcu_dereference(). This ensures that the
link pointers are accessed safely under RCU and eliminates the warning.
Fixes: f600832794 ("wifi: mac80211: restructure tx profile retrieval for MLO MBSSID")
Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250711033846.40455-1-maharaja.kennadyrajan@oss.qualcomm.com
[unindent like the non-RCU macro]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If this action frame, with the value of IEEE80211_HT_CHANWIDTH_ANY,
arrives right after a beacon that changed the operational bandwidth from
20 MHz to 40 MHz, then updating the rate control bandwidth to 40 can
race with updating the chanctx width (that happens in the beacon
proccesing) back to 40 MHz:
cpu0 cpu1
ieee80211_rx_mgmt_beacon
ieee80211_config_bw
ieee80211_link_change_chanreq
(*)ieee80211_link_update_chanreq
ieee80211_rx_h_action
(**)ieee80211_sta_cur_vht_bw
(***) ieee80211_recalc_chanctx_chantype
in (**), the maximum between the capability width and the bss width is
returned. But the bss width was just updated to 40 in (*),
so the action frame handling code will increase the width of the rate
control before the chanctx was increased (in ***), leading to a FW error
(at least in iwlwifi driver. But this is wrong regardless).
Fix this by simply handling the action frame async, so it won't race
with the beacon proccessing.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218632
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.bb9dc6f36c35.I39782d6077424e075974c3bee4277761494a1527@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Under the previous commit's assumption that FIPS isn't
supported by hardware, we don't need to modify the
cipher suite list, but just need to use the software
one instead of the driver's in this case, so clean up
the code.
Also fix it to exclude TKIP in this case, since that's
also dependent on RC4.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.cff427e8f8a5.I744d1ea6a37e3ea55ae8bc3e770acee734eff268@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All the paths that could return an error are considered
misuses of the function and WARN already, and none of
the callers ever check the return value. Remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.5b436ee3c20c.Ieff61ec510939adb5fe6da4840557b649b3aa820@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement dot11ExtendedRegInfoSupport to advertise non-AP station
regulatory power capability as part of regulatory connectivity
element in (Re)Association request frames so that AP can achieve
maximum client connectivity. Control field which was interpreted
using value of 3-bits B5 to B3, now uses value of 4-bits B6 to B3 to
interpret the type of AP. Hence update IEEE80211_HE_6GHZ_OPER_CTRL_REG_INFO
to parse 4-bits control field. If older AP still updates only 3-bits
value of control field, station can still interpret the value as per
section E.2.7 of IEEE 802.11 REVme D7.0 and support the appropriate
AP type.
Also update IEEE80211_6GHZ_CTRL_REG_INDOOR_SP_AP as the value of
standard power AP is changed to 8 instead of 4 so that AP can support both
LPI AP and SP AP to maximize the connectivity with stations. For backward
compatibility, keeping value 4 as old AP by limiting it to SP AP only.
Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609213232.90cdef116aad.I85da390fbee59355e3855691933e6a5e55c47ac4@changeid
[fix kernel-doc]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for updating the stations S1G capabilities when
an S1G association occurs.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250617080610.756048-3-lachlan.hodges@morsemicro.com
[remove unused S1G_CAP3_MAX_MPDU_LEN_3895/_7791]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, per-radio attributes are set on per-phy basis, i.e., all the
radios present in a wiphy will take attributes values sent from user. But
each radio in a wiphy can get different values from userspace based on
its requirement.
To extend support to set per-radio attributes, add support to get radio
index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX,
to get user specified radio index for which attributes should be changed.
Pass this to individual drivers, so that the drivers can use this radio
index to change per-radio attributes when necessary. Currently, per-radio
attributes identified are:
NL80211_ATTR_WIPHY_TX_POWER_LEVEL
NL80211_ATTR_WIPHY_ANTENNA_TX
NL80211_ATTR_WIPHY_ANTENNA_RX
NL80211_ATTR_WIPHY_RETRY_SHORT
NL80211_ATTR_WIPHY_RETRY_LONG
NL80211_ATTR_WIPHY_FRAG_THRESHOLD
NL80211_ATTR_WIPHY_RTS_THRESHOLD
NL80211_ATTR_WIPHY_COVERAGE_CLASS
NL80211_ATTR_TXQ_LIMIT
NL80211_ATTR_TXQ_MEMORY_LIMIT
NL80211_ATTR_TXQ_QUANTUM
By default, the radio index is set to -1. This means the attribute should
be treated as a global configuration. If the user has not specified any
index, then the radio index passed to individual drivers would be -1. This
would indicate that the attribute applies to all radios in that wiphy.
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, in multi-radio wiphy cases, if one radio is operating on a DFS
channel, -EBUSY is returned even when a scan is requested on a different
radio. Because of this, an MLD AP with one radio (link) on a DFS channel
and Automatic Channel Selection (ACS) on another radio (link) cannot be
brought up.
In multi-radio wiphy cases, multiple radios are grouped under a single
wiphy. Hence, if a radio is operating on a DFS channel and a scan is
requested on a different radio of the same wiphy, the scan can be allowed
simultaneously without impacting the DFS operations.
Add logic to check the underlying radio used for the requested scan. If the
radio on which DFS is already running is not being used, allow the scan
operation; otherwise, return -EBUSY.
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-3-92c2f37c81d9@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, in multi-radio wiphy cases, if a scan is ongoing on one radio,
-EBUSY is returned when DFS or a channel switch is initiated on another
radio. Because of this, an MLD AP with one radio (link) in an ongoing scan
cannot initiate DFS or a channel switch on another radio (link).
In multi-radio wiphy cases, multiple radios are grouped under a single
wiphy. Hence, if a scan is ongoing on one underlying radio and DFS or a
channel switch is requested on a different underlying radio of the same
wiphy, these operations can be allowed simultaneously.
Add logic to check the underlying radio used for the ongoing scan. If the
radio on which DFS or a channel switch is requested is not being used for
the scan, allow the operation; otherwise, return -EBUSY.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-2-92c2f37c81d9@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For MBSSID, each vif (struct ieee80211_vif) stores another vif
pointer for the transmitting profile of MBSSID set. This won't
suffice for MLO as there may be multiple links, each of which can
be part of different MBSSID sets. Hence the information needs to
be stored per-link. Additionally, the transmitted profile itself
may be part of an MLD hence storing vif will not suffice either.
Fix MLO by storing an instance of struct ieee80211_bss_conf
for each link.
Modify following operations to reflect the above structure updates:
- channel switch completion
- BSS color change completion
- Removing nontransmitted links in ieee80211_stop_mbssid()
- drivers retrieving the transmitted link for beacon templates.
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Co-developed-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408184501.3715887-3-aloka.dixit@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, MLD links for an AP_VLAN interface type is not fully
supported.
Add allocation of separate links for each VLAN interface and copy
chanctx and chandef of AP bss to VLAN where necessary. Separate
links are created because for Dynamic VLAN each link will have its own
default_multicast_key.
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Link: https://patch.msgid.link/20250325213125.1509362-3-muna.sinada@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently before iterating through valid links we are utilizing
open-coding when checking if vif valid_links is a non-zero value.
Add new macro, for_each_link_data(), which iterates through link_id
and checks if it is set on vif valid_links. If it is a valid link then
access link data for that link id.
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Link: https://patch.msgid.link/20250325213125.1509362-2-muna.sinada@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For multi-link reconfiguration, we shouldn't have any BSS
membership selectors that are different from the association.
Track the association selectors and use them to check the new
link(s) added during reconfiguration.
Fixes: 36e05b0b83 ("wifi: mac80211: Support dynamic link addition and removal")
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20250311121004.771de0c36a75.I72f87d048c8693919b99dd9d4eee39833f06d15f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the multi-link reconfiguration frame, the per-STA profile for
added links shouldn't include the multi-link element. Set the
association ID to an invalid value, so it doesn't erroneously
match the link ID if that happens to be zero.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.8e5be244c70f.I3472cd5c347814ee3600869a88488997bcd43224@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Support passing the value from userspace on to the AP in the
association and ML link reconfiguration requests. We may need
to also add a driver value to or in with the field, but for
now have no feature that is controlled by the driver.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250308225541.2e555beb0a76.I623f59023b47ec202fc0c7520f2b5f575b439927@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Count open monitor interfaces regardless of the monitor interface type.
The new counter virt_monitors takes over counting interfaces depending
on the virtual monitor interface while monitors is used for all active
monitor interfaces.
This fixes monitor packet mirroring when using MONITOR_FLAG_ACTIVE or
NO_VIRTUAL_MONITOR interfaces.
Fixes: 286e696770 ("wifi: mac80211: Drop cooked monitor support")
Reported-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Closes: https://lore.kernel.org/r/cc715114-4e3b-619a-49dc-a4878075e1dc@quicinc.com
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Tested-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20250220094139.61459-1-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a few tests for ieee80211_determine_chan_mode that check that
mac80211 will not try to connect to an AP if an advertised basic rate is
not supported.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.530c81eb7fdc.Ia77f5efdf9efb70d2766a3d6bf425553bcb308e8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add processing of negotiated TTLM tear down frame.
Handle this frame similar to the way a locally initiated
tear down is handled.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.860691076786.I32df71182c25c5f84e4534f40efe1316926b8249@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for configuring EPCS state:
- When EPCS is enabled, send an EPCS enable request action frame
to the AP. When the AP replies with EPCS enable response, enable
EPCS by applying the QoS parameters provided by the AP. Do so for
all the valid MLD links. Once EPCS is enabled, support processing
of unsolicited EPCS enable response frames.
- When EPCS is disabled, send an EPCS teardown request to the AP
and apply the QoS parameters as obtained from the last received
beacons. Do so for all the valid links.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.7a90afd7e140.I3f602d65f5c1fd849d6c70b12307dda33aa91ccb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Hostapd switched from cooked monitor interfaces to nl80211 Dec 2011.
Drop support for the outdated cooked monitor interfaces and fix
creating the virtual monitor interfaces in the following cases:
1) We have one non-monitor and one monitor interface with
%MONITOR_FLAG_ACTIVE enabled and then delete the non-monitor
interface.
2) We only have monitor interfaces enabled on resume while at least one
has %MONITOR_FLAG_ACTIVE set.
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Link: https://patch.msgid.link/20250204111352.7004-2-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for parsing an ML element of type EPCS priority
access, which can optionally be included in EHT protected action
frames used to configure EPCS.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.5afdf65cff46.I0ffa30b40fbad47bc5b608b5fd46047a8c44e904@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for adding and removing station links:
- Adding links is done asynchronously, i.e., first
an ML reconfiguration action frame is sent to the AP
requesting to add links, and only when the AP replies,
links which were added successfully by the AP are added
locally.
- Removing links is done synchronously, i.e., the links
are removed before sending the ML reconfiguration
action frame to the AP (to avoid using this links after
the AP MLD removed them but before the station got the
ML reconfiguration response). In case the AP replies with a
status indicating that a link removal was not successful,
disconnect (as this should not happen an is an indication
that something might be wrong on the AP MLD).
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.ec0492a8dd21.I2869686642bbc0f86c40f284ebf7e6f644b551ab@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We should not attempt a connection if the BSS we are connecting to
requires support for a basic rate or other feature using the BSS
membership selector. Add a check verifying this.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.e58a0f34c798.Ifeb3bfd7b157ffa2ccdb20ca1cba6cf068fd117d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The last use of ieee80211_smps_is_restrictive() was removed in 2020 by
commit 52b4810bed ("mac80211: Remove support for changing AP SMPS mode")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241226170119.108947-1-linux@treblig.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Multi-Link Operation implementation continues, both in stack and in
drivers. Otherwise it has been relatively quiet.
Major changes:
cfg80211/mac80211
* define wiphy guard
* get TX power per link
* EHT 320 MHz channel support for mesh
ath11k
* QCA6698AQ support
ath9k
* RX inactivity detection
rtl8xxxu
* add more USB device IDs
rtw88
* add more USB device IDs
* enable USB RX aggregation and USB 3 to improve performance
rtw89
* PowerSave flow for Multi-Link Operation
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmdkbAoRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuRIgf/dcjYr+eg3I7iU9qGxvEwHlDAC5CaMRwe
8+/SO6gy49xf6igleNQ2jBn/qAsJTiro6IzJwb1D6i16ax4TRUTEkTZSiYCzntKI
9Nkq59qhsRI4Vxrhp6NibUtVnjuRdSruVM5uLCccUCJ8tfq13WGhecR2pmV0TDO3
bRSza6L64XIuSmqHkuWS3Hz1YQvIvIZMeeiWoC35mtXg6ORRXpYloLtCzFn1zxoP
YPoeSfoAqIlaVwdB1DoaakU6is8oGZ0oI6zw/qaN8P7pYfqO62ATf6ZzAdwHE1dU
fow9nvwzln+BqgpdIK81QFR+XC+7LorCGSaQlYu6C0nxjSzycSrgOw==
=WIP7
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.14
Multi-Link Operation implementation continues, both in stack and in
drivers. Otherwise it has been relatively quiet.
Major changes:
cfg80211/mac80211
- define wiphy guard
- get TX power per link
- EHT 320 MHz channel support for mesh
ath11k
- QCA6698AQ support
ath9k
- RX inactivity detection
rtl8xxxu
- add more USB device IDs
rtw88
- add more USB device IDs
- enable USB RX aggregation and USB 3 to improve performance
rtw89
- PowerSave flow for Multi-Link Operation
* tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (121 commits)
wifi: wlcore: sysfs: constify 'struct bin_attribute'
wifi: brcmfmac: clarify unmodifiable headroom log message
wifi: brcmfmac: add missing header include for brcmf_dbg
wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy()
wifi: qtnfmac: fix spelling error in core.h
wifi: rtw89: phy: add dummy C2H event handler for report of TAS power
wifi: rtw89: 8851b: rfk: remove unnecessary assignment of return value of _dpk_dgain_read()
wifi: rtw89: 8852c: rfk: refine target channel calculation in _rx_dck_channel_calc()
wifi: rtlwifi: pci: wait for firmware loading before releasing memory
wifi: rtlwifi: fix memory leaks and invalid access at probe error path
wifi: rtlwifi: destroy workqueue at rtl_deinit_core
wifi: rtlwifi: remove unused check_buddy_priv
wifi: rtw89: 8922a: update format of RFK pre-notify H2C command v2
wifi: rtw89: regd: update regulatory map to R68-R51
wifi: rtw89: 8852c: disable ER SU when 4x HE-LTF and 0.8 GI capability differ
wifi: rtw89: disable firmware training HE GI and LTF
wifi: rtw89: ps: update data for firmware and settings for hardware before/after PS
wifi: rtw89: ps: refactor channel info to firmware before entering PS
wifi: rtw89: ps: refactor PS flow to support MLO
wifi: mwifiex: decrease timeout waiting for host sleep from 10s to 5s
...
====================
Link: https://patch.msgid.link/20241219185709.774EDC4CECE@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Macro for_each_sdata_link() accepts input '_local' but uses 'local'
in its processing. This currently works because all the functions
calling this macro have declared 'local' as a variable themselves.
But this results in compilation error when a new caller uses
'sdata->local' instead of declaring 'local' variable.
Use '_local' instead of 'local' in for_each_sdata_link().
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://patch.msgid.link/20241127180255.1460553-1-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we got an unprotected action frame with CSA and then we heard the
beacon with the CSA IE, we'll block the queues with the CSA reason
twice. Since this reason is refcounted, we won't wake up the queues
since we wake them up only once and the ref count will never reach 0.
This led to blocked queues that prevented any activity (even
disconnection wouldn't reset the queue state and the only way to recover
would be to reload the kernel module.
Fix this by not refcounting the CSA reason.
It becomes now pointless to maintain the csa_blocked_queues state.
Remove it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Fixes: 414e090bc4 ("wifi: mac80211: restrict public action ECSA frame handling")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219447
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241119173108.5ea90828c2cc.I4f89e58572fb71ae48e47a81e74595cac410fbac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmc04UYRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuckgf/RV0zy8gMuzJ/cSk1GDKoOYmEwAZ4JvtW
teAKghsODDW/bng2iKnXphJyx3spZRCNuvOmfPcHsWoResX+vqrKJOaER/3159OF
68xAPZNXPRF4M693IpIUB/P3uTw/jieXPI7ftSPuUOhStca/ALwQd5Lp3kNKkVtq
HipXJwCenVS7Hd8DdHbpvYFUckRWr3tHPFlOgG3qOQOVvfRen2z9rhM14oK9rn+h
f309ATHKTbpTKNagOPYAYcyHs3zE59hlVRgRqHL7Ew0a0HI8uPJ4KK2n5W6tZJFN
swhoQolc1uXrRYlZ3Bdr7mKSIqt557kRz7NJ9ITe7KKCU0CxM/7nhQ==
=v8bS
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
* tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits)
Revert "wifi: iwlegacy: do not skip frames with bad FCS"
wifi: mac80211: pass MBSSID config by reference
wifi: mac80211: Support EHT 1024 aggregation size in TX
net: rfkill: gpio: Add check for clk_enable()
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
wifi: Switch back to struct platform_driver::remove()
wifi: ipw2x00: libipw_rx_any(): fix bad alignment
wifi: brcmfmac: release 'root' node in all execution paths
wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend
wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA
wifi: iwlwifi: bump minimum API version in BZ/SC to 92
wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h
wifi: iwlwifi: be less noisy if the NIC is dead in S3
wifi: iwlwifi: mvm: tell iwlmei when we finished suspending
wifi: iwlwifi: allow fast resume on ax200
wifi: iwlwifi: mvm: support new initiator and responder command version
wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency
wifi: iwlwifi: mvm: MLO scan upon channel condition degradation
wifi: iwlwifi: mvm: support new versions of the wowlan APIs
wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif()
...
====================
Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support EHT 1024 aggregation size in TX
The 1024 agg size for RX is supported but not for TX.
This patch adds this support and refactors common parsing logics for
addbaext in both process_addba_resp and process_addba_req into a
function.
Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Reviewed-by: Money Wang <money.wang@mediatek.com>
Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Link: https://patch.msgid.link/20241112083846.32063-1-MeiChia.Chiu@mediatek.com
[pass elems/len instead of mgmt/len/is_req]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move the `struct ieee80211_chanctx_conf conf` to the end of
`struct ieee80211_chanctx` and fix a memory corruption bug
triggered e.g. in `hwsim_set_chanctx_magic()`: `radar_detected`
is being overwritten when `cp->magic = HWSIM_CHANCTX_MAGIC;`
See the function call sequence below:
drv_add_chanctx(... struct ieee80211_chanctx *ctx) ->
local->ops->add_chanctx(&local->hw, &ctx->conf) ->
mac80211_hwsim_add_chanctx(... struct ieee80211_chanctx_conf *ctx) ->
hwsim_set_chanctx_magic(ctx)
This also happens in a number of other drivers.
Also, add a code comment to try to prevent people from introducing
new members after `struct ieee80211_chanctx_conf conf`. Notice that
`struct ieee80211_chanctx_conf` is a flexible structure --a structure
that contains a flexible-array member, so it should always be at
the end of any other containing structures.
This change also fixes 50 of the following warnings:
net/mac80211/ieee80211_i.h:895:39: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Fixes: bca8bc0399 ("wifi: mac80211: handle ieee80211_radar_detected() for MLO")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/ZxwWPrncTeSi1UTq@kspp
[also refer to other drivers in commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers might need to also do this calculation, no point in
them duplicating the code. Since it's so simple, just make
it an inline.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.af003cb4a088.I8b5d29504b726caae24af6013c65b3daebe842a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers may need to track this. Make it available for them, and maintain
the value when beacons are received.
When link X receives a beacon, iterate the RNR elements and update all
the links with their respective data.
Track the link id that updated the data so that each link can know
whether the update came from its own beacon or from another link.
In case, the update came from the link's own beacon, always update the
updater link id.
The purpose is to let the low level driver know if a link is losing its
beacons. If link X is losing its beacons, it can still track the
bss_param_ch_cnt and know where the update came from.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.e2d8d1a722ad.I04b883daba2cd48e5730659eb62ca1614c899cbb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The chandef parameter passed to ieee80211_ie_build_he_oper() and
ieee80211_ie_build_eht_oper is read-only. Since it is never modified,
add the const qualifier to this parameter. This makes these consistent
with ieee80211_ie_build_ht_oper() and ieee80211_ie_build_vht_oper().
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240910-wireless-utils-constify-v1-1-e59947bcb3c3@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Call to ieee80211_color_collision_detection_work() needs wiphy lock to
be held (see lockdep assert in cfg80211_bss_color_notify()). Not locking
wiphy causes the following lockdep error:
WARNING: CPU: 2 PID: 42 at net/wireless/nl80211.c:19505 cfg80211_bss_color_notify+0x1a4/0x25c
Modules linked in:
CPU: 2 PID: 42 Comm: kworker/u8:3 Tainted: G W 6.4.0-02327-g36c6cb260481 #1048
Hardware name:
Workqueue: phy1 ieee80211_color_collision_detection_work
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : cfg80211_bss_color_notify+0x1a4/0x25c
lr : cfg80211_bss_color_notify+0x1a0/0x25c
sp : ffff000002947d00
x29: ffff000002947d00 x28: ffff800008e1a000 x27: ffff000002bd4705
x26: ffff00000d034000 x25: ffff80000903cf40 x24: 0000000000000000
x23: ffff00000cb70720 x22: 0000000000800000 x21: ffff800008dfb008
x20: 000000000000008d x19: ffff00000d035fa8 x18: 0000000000000010
x17: 0000000000000001 x16: 000003564b1ce96a x15: 000d69696d057970
x14: 000000000000003b x13: 0000000000000001 x12: 0000000000040000
x11: 0000000000000001 x10: ffff80000978f9c0 x9 : ffff0000028d3174
x8 : ffff800008e30000 x7 : 0000000000000000 x6 : 0000000000000028
x5 : 000000000002f498 x4 : ffff00000d034a80 x3 : 0000000000800000
x2 : ffff800016143000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
cfg80211_bss_color_notify+0x1a4/0x25c
ieee80211_color_collision_detection_work+0x20/0x118
process_one_work+0x294/0x554
worker_thread+0x70/0x440
kthread+0xf4/0xf8
ret_from_fork+0x10/0x20
irq event stamp: 77372
hardirqs last enabled at (77371): [<ffff800008a346fc>] _raw_spin_unlock_irq+0x2c/0x4c
hardirqs last disabled at (77372): [<ffff800008a28754>] el1_dbg+0x20/0x48
softirqs last enabled at (77350): [<ffff8000089e120c>] batadv_send_outstanding_bcast_packet+0xb8/0x120
softirqs last disabled at (77348): [<ffff8000089e11d4>] batadv_send_outstanding_bcast_packet+0x80/0x120
The wiphy lock cannot be taken directly from color collision detection
delayed work (ieee80211_color_collision_detection_work()) because this
work is cancel_delayed_work_sync() under this wiphy lock causing a
potential deadlock( see [0] for details).
To fix that ieee80211_color_collision_detection_work() could be
converted to a wiphy work and cancel_delayed_work_sync() can be simply
replaced by wiphy_delayed_work_cancel() serving the same purpose under
wiphy lock.
This could potentially fix [1].
[0]: https://lore.kernel.org/linux-wireless/D4A40Q44OAY2.W3SIF6UEPBUN@freebox.fr/
[1]: https://lore.kernel.org/lkml/000000000000612f290618eee3e5@google.com/
Reported-by: Nicolas Escande <nescande@freebox.fr>
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://patch.msgid.link/20240924192805.13859-3-repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently DFS works under assumption there could be only one channel
context in the hardware. Hence, drivers just calls the function
ieee80211_radar_detected() passing the hardware structure. However, with
MLO, this obviously will not work since number of channel contexts will be
more than one and hence drivers would need to pass the channel information
as well on which the radar is detected.
Also, when radar is detected in one of the links, other link's CAC should
not be cancelled.
Hence, in order to support DFS with MLO, do the following changes -
* Add channel context conf pointer as an argument to the function
ieee80211_radar_detected(). During MLO, drivers would have to pass on
which channel context conf radar is detected. Otherwise, drivers could
just pass NULL.
* ieee80211_radar_detected() will iterate over all channel contexts
present and
* if channel context conf is passed, only mark that as radar
detected
* if NULL is passed, then mark all channel contexts as radar
detected
* Then as usual, schedule the radar detected work.
* In the worker, go over all the contexts again and for all such context
which is marked with radar detected, cancel the ongoing CAC by calling
ieee80211_dfs_cac_cancel() and then notify cfg80211 via
cfg80211_radar_event().
* To cancel the CAC, pass the channel context as well where radar is
detected to ieee80211_dfs_cac_cancel(). This ensures that CAC is
canceled only on the links using the provided context, leaving other
links unaffected.
This would also help in scenarios where there is split phy 5 GHz radio,
which is capable of DFS channels in both lower and upper band. In this
case, simultaneous radars can be detected.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-9-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit ce9e660ef3 ("wifi: mac80211: move radar detect work to sdata").
To enable radar detection with MLO, it’s essential to handle it on a
per-link basis. This is because when using MLO, multiple links may already
be active and beaconing. In this scenario, another link should be able to
initiate a radar detection. Also, if underlying links are associated with
different hardware devices but grouped together for MLO, they could
potentially start radar detection simultaneously. Therefore, it makes
sense to manage radar detection settings separately for each link by moving
them back to a per-link data structure.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-2-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers need to purge TX SKB when stopping. Using skb_queue_purge() can't
report TX status to mac80211, causing ieee80211_free_ack_frame() warns
"Have pending ack frames!". Export ieee80211_purge_tx_queue() for drivers
to not have to reimplement it.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240822014255.10211-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce 'ieee80211_mgmt_ba()' to avoid code duplication between
'ieee80211_send_addba_resp()', 'ieee80211_send_addba_request()',
and 'ieee80211_send_delba()', ensure that all related addresses
are '__aligned(2)', and prefer convenient 'ether_addr_copy()'
over generic 'memcpy()'. No functional changes expected.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20240725090925.6022-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
