Drivers that are using ops lock and don't depend on RTNL lock
still need to manage it because udp_tunnel's RTNL dependency.
Introduce new udp_tunnel_nic_lock and use it instead of
rtnl_lock. Drop non-UDP_TUNNEL_NIC_INFO_MAY_SLEEP mode from
udp_tunnel infra (udp_tunnel_nic_device_sync_work needs to
grab udp_tunnel_nic_lock mutex and might sleep).
Cover more places in v4:
- netlink
- udp_tunnel_notify_add_rx_port (ndo_open)
- triggers udp_tunnel_nic_device_sync_work
- udp_tunnel_notify_del_rx_port (ndo_stop)
- triggers udp_tunnel_nic_device_sync_work
- udp_tunnel_get_rx_info (__netdev_update_features)
- triggers NETDEV_UDP_TUNNEL_PUSH_INFO
- udp_tunnel_drop_rx_info (__netdev_update_features)
- triggers NETDEV_UDP_TUNNEL_DROP_INFO
- udp_tunnel_nic_reset_ntf (ndo_open)
- notifiers
- udp_tunnel_nic_netdevice_event, depending on the event:
- triggers NETDEV_UDP_TUNNEL_PUSH_INFO
- triggers NETDEV_UDP_TUNNEL_DROP_INFO
- ethnl_tunnel_info_reply_size
- udp_tunnel_nic_set_port_priv (two intel drivers)
Cc: Michael Chan <michael.chan@broadcom.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250616162117.287806-4-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
iptunnel_xmit() erases the contents of the SKB control block. In order to
be able to set particular IPCB flags on the SKB, add a corresponding
parameter, and propagate it to udp_tunnel_xmit_skb() as well.
In one of the following patches, VXLAN driver will use this facility to
mark packets as subject to IP multicast routing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/89c9daf9f2dc088b6b92ccebcc929f51742de91f.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most UDP tunnels bind a socket to a local port, with ANY address, no
peer and no interface index specified.
Additionally it's quite common to have a single tunnel device per
namespace.
Track in each namespace the UDP tunnel socket respecting the above.
When only a single one is present, store a reference in the netns.
When such reference is not NULL, UDP tunnel GRO lookup just need to
match the incoming packet destination port vs the socket local port.
The tunnel socket never sets the reuse[port] flag[s]. When bound to no
address and interface, no other socket can exist in the same netns
matching the specified local port.
Matching packets with non-local destination addresses will be
aggregated, and eventually segmented as needed - no behavior changes
intended.
Restrict the optimization to kernel sockets only: it covers all the
relevant use-cases, and user-space owned sockets could be disconnected
and rebound after setup_udp_tunnel_sock(), breaking the uniqueness
assumption
Note that the UDP tunnel socket reference is stored into struct
netns_ipv4 for both IPv4 and IPv6 tunnels. That is intentional to keep
all the fastpath-related netns fields in the same struct and allow
cacheline-based optimization. Currently both the IPv4 and IPv6 socket
pointer share the same cacheline as the `udp_table` field.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/41d16bc8d1257d567f9344c445b4ae0b4a91ede4.1744040675.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unmask the upper DSCP bits when calling ip_route_output_key() so that in
the future it could perform the FIB lookup according to the full DSCP
value.
Note that callers of udp_tunnel_dst_lookup() pass the entire DS field in
the 'tos' argument.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Historically, tunnel flags like TUNNEL_CSUM or TUNNEL_ERSPAN_OPT
have been defined as __be16. Now all of those 16 bits are occupied
and there's no more free space for new flags.
It can't be simply switched to a bigger container with no
adjustments to the values, since it's an explicit Endian storage,
and on LE systems (__be16)0x0001 equals to
(__be64)0x0001000000000000.
We could probably define new 64-bit flags depending on the
Endianness, i.e. (__be64)0x0001 on BE and (__be64)0x00010000... on
LE, but that would introduce an Endianness dependency and spawn a
ton of Sparse warnings. To mitigate them, all of those places which
were adjusted with this change would be touched anyway, so why not
define stuff properly if there's no choice.
Define IP_TUNNEL_*_BIT counterparts as a bit number instead of the
value already coded and a fistful of <16 <-> bitmap> converters and
helpers. The two flags which have a different bit position are
SIT_ISATAP_BIT and VTI_ISVTI_BIT, as they were defined not as
__cpu_to_be16(), but as (__force __be16), i.e. had different
positions on LE and BE. Now they both have strongly defined places.
Change all __be16 fields which were used to store those flags, to
IP_TUNNEL_DECLARE_FLAGS() -> DECLARE_BITMAP(__IP_TUNNEL_FLAG_NUM) ->
unsigned long[1] for now, and replace all TUNNEL_* occurrences to
their bitmap counterparts. Use the converters in the places which talk
to the userspace, hardware (NFP) or other hosts (GRE header). The rest
must explicitly use the new flags only. This must be done at once,
otherwise there will be too many conversions throughout the code in
the intermediate commits.
Finally, disable the old __be16 flags for use in the kernel code
(except for the two 'irregular' flags mentioned above), to prevent
any accidental (mis)use of them. For the userspace, nothing is
changed, only additions were made.
Most noticeable bloat-o-meter difference (.text):
vmlinux: 307/-1 (306)
gre.ko: 62/0 (62)
ip_gre.ko: 941/-217 (724) [*]
ip_tunnel.ko: 390/-900 (-510) [**]
ip_vti.ko: 138/0 (138)
ip6_gre.ko: 534/-18 (516) [*]
ip6_tunnel.ko: 118/-10 (108)
[*] gre_flags_to_tnl_flags() grew, but still is inlined
[**] ip_tunnel_find() got uninlined, hence such decrease
The average code size increase in non-extreme case is 100-200 bytes
per module, mostly due to sizeof(long) > sizeof(__be16), as
%__IP_TUNNEL_FLAG_NUM is less than %BITS_PER_LONG and the compilers
are able to expand the majority of bitmap_*() calls here into direct
operations on scalars.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the IPv4 modules.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208164244.3818498-7-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 451ef36bd2 ("ip_tunnels: Add new flow flags field to
ip_tunnel_key") added a new field to struct ip_tunnel_key to control
route lookups. Currently the flag is used by vxlan and geneve tunnels;
use it also in udp_tunnel_dst_lookup() so that it affects all tunnel
types relying on this function.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to make the function more generic so that it can be used by
other UDP tunnel implementations such as geneve and vxlan. To do that,
add the following arguments:
- source and destination UDP port;
- ifindex of the output interface, needed by vxlan;
- the tos, because in some cases it is not taken from struct
ip_tunnel_info (for example, when it's inherited from the inner
packet);
- the dst cache, because not all tunnel types (e.g. vxlan) want to
use the one from struct ip_tunnel_info.
With these parameters, the function no longer needs the full struct
ip_tunnel_info as argument and we can pass only the relevant part of
it (struct ip_tunnel_key).
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function is now UDP-specific, the protocol is always IPPROTO_UDP.
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
At the moment ip_route_output_tunnel() is used only by bareudp.
Ideally, other UDP tunnel implementations should use it, but to do so
the function needs to accept new parameters that are specific for UDP
tunnels, such as the ports.
Prepare for these changes by renaming the function to
udp_tunnel_dst_lookup() and move it to file
net/ipv4/udp_tunnel_core.c.
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move udp->encap_enabled to udp->udp_flags.
Add udp_test_and_set_bit() helper to allow lockless
udp_tunnel_encap_enable() implementation.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
IP_MULTICAST_LOOP socket option can now be set/read
without locking the socket.
v3: fix build bot error reported in ipvs set_mcast_loop()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a race condition in vxlan that when deleting a vxlan device
during receiving packets, there is a possibility that the sock is
released after getting vxlan_sock vs from sk_user_data. Then in
later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got
NULL pointer dereference. e.g.
#0 [ffffa25ec6978a38] machine_kexec at ffffffff8c669757
#1 [ffffa25ec6978a90] __crash_kexec at ffffffff8c7c0a4d
#2 [ffffa25ec6978b58] crash_kexec at ffffffff8c7c1c48
#3 [ffffa25ec6978b60] oops_end at ffffffff8c627f2b
#4 [ffffa25ec6978b80] page_fault_oops at ffffffff8c678fcb
#5 [ffffa25ec6978bd8] exc_page_fault at ffffffff8d109542
#6 [ffffa25ec6978c00] asm_exc_page_fault at ffffffff8d200b62
[exception RIP: vxlan_ecn_decapsulate+0x3b]
RIP: ffffffffc1014e7b RSP: ffffa25ec6978cb0 RFLAGS: 00010246
RAX: 0000000000000008 RBX: ffff8aa000888000 RCX: 0000000000000000
RDX: 000000000000000e RSI: ffff8a9fc7ab803e RDI: ffff8a9fd1168700
RBP: ffff8a9fc7ab803e R8: 0000000000700000 R9: 00000000000010ae
R10: ffff8a9fcb748980 R11: 0000000000000000 R12: ffff8a9fd1168700
R13: ffff8aa000888000 R14: 00000000002a0000 R15: 00000000000010ae
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffffa25ec6978ce8] vxlan_rcv at ffffffffc10189cd [vxlan]
#8 [ffffa25ec6978d90] udp_queue_rcv_one_skb at ffffffff8cfb6507
#9 [ffffa25ec6978dc0] udp_unicast_rcv_skb at ffffffff8cfb6e45
#10 [ffffa25ec6978dc8] __udp4_lib_rcv at ffffffff8cfb8807
#11 [ffffa25ec6978e20] ip_protocol_deliver_rcu at ffffffff8cf76951
#12 [ffffa25ec6978e48] ip_local_deliver at ffffffff8cf76bde
#13 [ffffa25ec6978ea0] __netif_receive_skb_one_core at ffffffff8cecde9b
#14 [ffffa25ec6978ec8] process_backlog at ffffffff8cece139
#15 [ffffa25ec6978f00] __napi_poll at ffffffff8ceced1a
#16 [ffffa25ec6978f28] net_rx_action at ffffffff8cecf1f3
#17 [ffffa25ec6978fa0] __softirqentry_text_start at ffffffff8d4000ca
#18 [ffffa25ec6978ff0] do_softirq at ffffffff8c6fbdc3
Reproducer: https://github.com/Mellanox/ovs-tests/blob/master/test-ovs-vxlan-remove-tunnel-during-traffic.sh
Fix this by waiting for all sk_user_data reader to finish before
releasing the sock.
Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Fixes: 6a93cc9052 ("udp-tunnel: Add a few more UDP tunnel APIs")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Because rxrpc pretends to be a tunnel on top of a UDP/UDP6 socket, allowing
it to siphon off UDP packets early in the handling of received UDP packets
thereby avoiding the packet going through the UDP receive queue, it doesn't
get ICMP packets through the UDP ->sk_error_report() callback. In fact, it
doesn't appear that there's any usable option for getting hold of ICMP
packets.
Fix this by adding a new UDP encap hook to distribute error messages for
UDP tunnels. If the hook is set, then the tunnel driver will be able to
see ICMP packets. The hook provides the offset into the packet of the UDP
header of the original packet that caused the notification.
An alternative would be to call the ->error_handler() hook - but that
requires that the skbuff be cloned (as ip_icmp_error() or ipv6_cmp_error()
do, though isn't really necessary or desirable in rxrpc's case is we want
to parse them there and then, not queue them).
Changes
=======
ver #3)
- Fixed an uninitialised variable.
ver #2)
- Fixed some missing CONFIG_AF_RXRPC_IPV6 conditionals.
Fixes: 5271953cad ("rxrpc: Use the UDP encap_rcv hook")
Signed-off-by: David Howells <dhowells@redhat.com>
udp_tunnel_core.c hasn't use any macro or function declared in udp.h, types.h,
and net_namespace.h. Thus, these files can be removed from udp_tunnel_core.c
safely without affecting the compilation of the net module.
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the NETIF_F_RX_UDP_TUNNEL_PORT feature check into
udp_tunnel_nic_*_port() helpers, since they're always
done right before the call.
Add similar checks before calling the notifier.
udp_tunnel_nic invokes the notifier without checking
features which could result in some wasted cycles.
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All drivers use udp_tunnel_nic_*_port() helpers, prepare for
NDO removal by invoking those helpers directly.
The helpers are safe to call on all devices, they check if
device has the UDP tunnel state initialized.
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cater to devices which:
(a) may want to sleep in the callbacks;
(b) only have IPv4 support;
(c) need all the programming to happen while the netdev is up.
Drivers attach UDP tunnel offload info struct to their netdevs,
where they declare how many UDP ports of various tunnel types
they support. Core takes care of tracking which ports to offload.
Use a fixed-size array since this matches what almost all drivers
do, and avoids a complexity and uncertainty around memory allocations
in an atomic context.
Make sure that tunnel drivers don't try to replay the ports when
new NIC netdev is registered. Automatic replays would mess up
reference counting, and will be removed completely once all drivers
are converted.
v4:
- use a #define NULL to avoid build issues with CONFIG_INET=n.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
