Hashed work is serialized by io-wq, intended to be used for cases like
serializing buffered writes to a regular file, where the file system
will serialize the workers anyway with a mutex or similar. Since they
would be forcibly serialized and blocked, it's more efficient for io-wq
to handle these individually rather than issue them in parallel.
If a worker is currently handling a hashed work item and gets blocked,
don't create a new worker if the next work item is also hashed and
mapped to the same bucket. That new worker would not be able to make any
progress anyway.
Reported-by: Fengnan Chang <changfengnan@bytedance.com>
Reported-by: Diangang Li <lidiangang@bytedance.com>
Link: https://lore.kernel.org/io-uring/20250522090909.73212-1-changfengnan@bytedance.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When an io-wq worker goes to sleep, it checks if there's work to do.
If there is, it'll create a new worker. But if this worker is currently
idle, it'll either get woken right back up immediately, or someone
else has already created the necessary worker to handle this work.
Only go through the worker creation logic if the current worker is
currently handling a work item. That means it's being scheduled out as
part of handling that work, not just going to sleep on its own.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
struct io_wq stores do_work and free_work function pointers which are
called on each work item. But these function pointers are always set to
io_wq_submit_work and io_wq_free_work, respectively. So remove these
function pointers and just call the functions directly.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250329161527.3281314-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge mainline fixes into 6.15 branch, as upcoming patches depend on
fixes that went into the 6.14 mainline branch.
* io_uring-6.14:
io_uring/net: save msg_control for compat
io_uring/rw: clean up mshot forced sync mode
io_uring/rw: move ki_complete init into prep
io_uring/rw: don't directly use ki_complete
io_uring/rw: forbid multishot async reads
io_uring/rsrc: remove unused constants
io_uring: fix spelling error in uapi io_uring.h
io_uring: prevent opcode speculation
io-wq: backoff when retrying worker creation
Previously, the `hash` variable was initialized with `-1` and only
updated by io_get_next_work() if the current work was hashed. Commit
60cf46ae60 ("io-wq: hash dependent work") changed this to always
call io_get_work_hash() even if the work was not hashed. This caused
the `hash != -1U` check to always be true, adding some overhead for
the `hash->wait` code.
This patch fixes the regression by checking the `IO_WQ_WORK_HASHED`
flag.
Perf diff for a flood of `IORING_OP_NOP` with `IOSQE_ASYNC`:
38.55% -1.57% [kernel.kallsyms] [k] queued_spin_lock_slowpath
6.86% -0.72% [kernel.kallsyms] [k] io_worker_handle_work
0.10% +0.67% [kernel.kallsyms] [k] put_prev_entity
1.96% +0.59% [kernel.kallsyms] [k] io_nop_prep
3.31% -0.51% [kernel.kallsyms] [k] try_to_wake_up
7.18% -0.47% [kernel.kallsyms] [k] io_wq_free_work
Fixes: 60cf46ae60 ("io-wq: hash dependent work")
Cc: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/20250128133927.3989681-6-max.kellermann@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Have separate linked lists for bounded and unbounded workers. This
way, io_acct_activate_free_worker() sees only workers relevant to it
and doesn't need to skip irrelevant ones. This speeds up the
linked list traversal (under acct->lock).
The `io_wq.lock` field is moved to `io_wq_acct.workers_lock`. It did
not actually protect "access to elements below", that is, not all of
them; it only protected access to the worker lists. By having two
locks instead of one, contention on this lock is reduced.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/20250128133927.3989681-4-max.kellermann@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This replaces the `IO_WORKER_F_BOUND` flag. All code that checks this
flag is not interested in knowing whether this is a "bound" worker;
all it does with this flag is determine the `io_wq_acct` pointer. At
the cost of an extra pointer field, we can eliminate some fragile
pointer arithmetic. In turn, the `create_index` and `index` fields
are not needed anymore.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/20250128133927.3989681-3-max.kellermann@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of calling io_work_get_acct() again, pass acct to
io_wq_insert_work() and io_wq_remove_pending().
This atomic access in io_work_get_acct() was done under the
`acct->lock`, and optimizing it away reduces lock contention a bit.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/20250128133927.3989681-2-max.kellermann@ionos.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When io_uring submission goes async for the first time on a given task,
we'll try to create a worker thread to handle the submission. Creating
this worker thread can fail due to various transient conditions, such as
an outstanding signal in the forking thread, so we have retry logic with
a limit of 3 retries. However, this retry logic appears to be too
aggressive/fast - we've observed a thread blowing through the retry
limit while having the same outstanding signal the whole time. Here's an
excerpt of some tracing that demonstrates the issue:
First, signal 26 is generated for the process. It ends up getting routed
to thread 92942.
0) cbd-92284 /* signal_generate: sig=26 errno=0 code=-2 comm=psblkdASD pid=92934 grp=1 res=0 */
This causes create_io_thread in the signalled thread to fail with
ERESTARTNOINTR, and thus a retry is queued.
13) task_th-92942 /* io_uring_queue_async_work: ring 000000007325c9ae, request 0000000080c96d8e, user_data 0x0, opcode URING_CMD, flags 0x8240001, normal queue, work 000000006e96dd3f */
13) task_th-92942 io_wq_enqueue() {
13) task_th-92942 _raw_spin_lock();
13) task_th-92942 io_wq_activate_free_worker();
13) task_th-92942 _raw_spin_lock();
13) task_th-92942 create_io_worker() {
13) task_th-92942 __kmalloc_cache_noprof();
13) task_th-92942 __init_swait_queue_head();
13) task_th-92942 kprobe_ftrace_handler() {
13) task_th-92942 get_kprobe();
13) task_th-92942 aggr_pre_handler() {
13) task_th-92942 pre_handler_kretprobe();
13) task_th-92942 /* create_enter: (create_io_thread+0x0/0x50) fn=0xffffffff8172c0e0 arg=0xffff888996bb69c0 node=-1 */
13) task_th-92942 } /* aggr_pre_handler */
...
13) task_th-92942 } /* copy_process */
13) task_th-92942 } /* create_io_thread */
13) task_th-92942 kretprobe_rethook_handler() {
13) task_th-92942 /* create_exit: (create_io_worker+0x8a/0x1a0 <- create_io_thread) arg1=0xfffffffffffffdff */
13) task_th-92942 } /* kretprobe_rethook_handler */
13) task_th-92942 queue_work_on() {
...
The CPU is then handed to a kworker to process the queued retry:
------------------------------------------
13) task_th-92942 => kworker-54154
------------------------------------------
13) kworker-54154 io_workqueue_create() {
13) kworker-54154 io_queue_worker_create() {
13) kworker-54154 task_work_add() {
13) kworker-54154 wake_up_state() {
13) kworker-54154 try_to_wake_up() {
13) kworker-54154 _raw_spin_lock_irqsave();
13) kworker-54154 _raw_spin_unlock_irqrestore();
13) kworker-54154 } /* try_to_wake_up */
13) kworker-54154 } /* wake_up_state */
13) kworker-54154 kick_process();
13) kworker-54154 } /* task_work_add */
13) kworker-54154 } /* io_queue_worker_create */
13) kworker-54154 } /* io_workqueue_create */
And then we immediately switch back to the original task to try creating
a worker again. This fails, because the original task still hasn't
handled its signal.
-----------------------------------------
13) kworker-54154 => task_th-92942
------------------------------------------
13) task_th-92942 create_worker_cont() {
13) task_th-92942 kprobe_ftrace_handler() {
13) task_th-92942 get_kprobe();
13) task_th-92942 aggr_pre_handler() {
13) task_th-92942 pre_handler_kretprobe();
13) task_th-92942 /* create_enter: (create_io_thread+0x0/0x50) fn=0xffffffff8172c0e0 arg=0xffff888996bb69c0 node=-1 */
13) task_th-92942 } /* aggr_pre_handler */
13) task_th-92942 } /* kprobe_ftrace_handler */
13) task_th-92942 create_io_thread() {
13) task_th-92942 copy_process() {
13) task_th-92942 task_active_pid_ns();
13) task_th-92942 _raw_spin_lock_irq();
13) task_th-92942 recalc_sigpending();
13) task_th-92942 _raw_spin_lock_irq();
13) task_th-92942 } /* copy_process */
13) task_th-92942 } /* create_io_thread */
13) task_th-92942 kretprobe_rethook_handler() {
13) task_th-92942 /* create_exit: (create_worker_cont+0x35/0x1b0 <- create_io_thread) arg1=0xfffffffffffffdff */
13) task_th-92942 } /* kretprobe_rethook_handler */
13) task_th-92942 io_worker_release();
13) task_th-92942 queue_work_on() {
13) task_th-92942 clear_pending_if_disabled();
13) task_th-92942 __queue_work() {
13) task_th-92942 } /* __queue_work */
13) task_th-92942 } /* queue_work_on */
13) task_th-92942 } /* create_worker_cont */
The pattern repeats another couple times until we blow through the retry
counter, at which point we give up. All outstanding work is canceled,
and the io_uring command which triggered all this is failed with
ECANCELED:
13) task_th-92942 io_acct_cancel_pending_work() {
...
13) task_th-92942 /* io_uring_complete: ring 000000007325c9ae, req 0000000080c96d8e, user_data 0x0, result -125, cflags 0x0 extra1 0 extra2 0 */
Finally, the task gets around to processing its outstanding signal 26,
but it's too late.
13) task_th-92942 /* signal_deliver: sig=26 errno=0 code=-2 sa_handler=59566a0 sa_flags=14000000 */
Try to address this issue by adding a small scaling delay when retrying
worker creation. This should give the forking thread time to handle its
signal in the above case. This isn't a particularly satisfying solution,
as sufficiently paradoxical scheduling would still have us hitting the
same issue, and I'm open to suggestions for something better. But this
is likely to prevent this (already rare) issue from hitting in practice.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250208-wq_retry-v2-1-4f6f5041d303@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Using strscpy() meant that the final character in task->comm may be
non-NUL for a moment before the "string too long" truncation happens.
Instead of adding a new use of the ambiguous strncpy(), we'd want to
use memtostr_pad() which enforces being able to check at compile time
that sizes are sensible, but this requires being able to see string
buffer lengths. Instead of trying to inline __set_task_comm() (which
needs to call trace and perf functions), just open-code it. But to
make sure we're always safe, add compile-time checking like we already
do for get_task_comm().
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Kees Cook <kees@kernel.org>
The io worker threads are userland threads that just never exit to the
userland. By that, they are also assigned to a cgroup (the group of the
creating task).
When creating a new io worker, this worker should inherit the cpuset
of the cgroup.
Fixes: da64d6db3b ("io_uring: One wqe per wq")
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Link: https://lore.kernel.org/r/20240910171157.166423-3-felix.moessbauer@siemens.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The io worker threads are userland threads that just never exit to the
userland. By that, they are also assigned to a cgroup (the group of the
creating task).
When changing the affinity of the io_wq thread via syscall, we must only
allow cpumasks within the limits defined by the cpuset controller of the
cgroup (if enabled).
Fixes: da64d6db3b ("io_uring: One wqe per wq")
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Link: https://lore.kernel.org/r/20240910171157.166423-2-felix.moessbauer@siemens.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If io-wq worker creation fails, we retry it by queueing up a task_work.
tasK_work is needed because it should be done from the user process
context. The problem is that retries are not limited, and if queueing a
task_work is the reason for the failure, we might get into an infinite
loop.
It doesn't seem to happen now but it would with the following patch
executing task_work in the freezer's loop. For now, arbitrarily limit the
number of attempts to create a worker.
Cc: stable@vger.kernel.org
Fixes: 3146cba99a ("io-wq: make worker creation resilient against signals")
Reported-by: Julian Orth <ju.orth@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8280436925db88448c7c85c6656edee1a43029ea.1720634146.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The work flags can be set/accessed from different tasks, both the
originator of the request, and the io-wq workers. While modifications
aren't concurrent, it still makes KMSAN unhappy. There's no real
downside to just making the flag reading/manipulation use proper
atomics here.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Clang static checker (scan-build) warning:
o_uring/io-wq.c:line 1051, column 3
The expression is an uninitialized value. The computed value will
also be garbage.
'match.nr_pending' is used in io_acct_cancel_pending_work(), but it is
not fully initialized. Change the order of assignment for 'match' to fix
this problem.
Fixes: 42abc95f05 ("io-wq: decouple work_list protection from the big wqe->lock")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20240604121242.2661244-1-suhui@nfschina.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Utilize set_bit() and test_bit() on worker->flags within io_uring/io-wq
to address potential data races.
The structure io_worker->flags may be accessed through various data
paths, leading to concurrency issues. When KCSAN is enabled, it reveals
data races occurring in io_worker_handle_work and
io_wq_activate_free_worker functions.
BUG: KCSAN: data-race in io_worker_handle_work / io_wq_activate_free_worker
write to 0xffff8885c4246404 of 4 bytes by task 49071 on cpu 28:
io_worker_handle_work (io_uring/io-wq.c:434 io_uring/io-wq.c:569)
io_wq_worker (io_uring/io-wq.c:?)
<snip>
read to 0xffff8885c4246404 of 4 bytes by task 49024 on cpu 5:
io_wq_activate_free_worker (io_uring/io-wq.c:? io_uring/io-wq.c:285)
io_wq_enqueue (io_uring/io-wq.c:947)
io_queue_iowq (io_uring/io_uring.c:524)
io_req_task_submit (io_uring/io_uring.c:1511)
io_handle_tw_list (io_uring/io_uring.c:1198)
<snip>
Line numbers against commit 18daea77cc ("Merge tag 'for-linus' of
git://git.kernel.org/pub/scm/virt/kvm/kvm").
These races involve writes and reads to the same memory location by
different tasks running on different CPUs. To mitigate this, refactor
the code to use atomic operations such as set_bit(), test_bit(), and
clear_bit() instead of basic "and" and "or" operations. This ensures
thread-safe manipulation of worker flags.
Also, move `create_index` to avoid holes in the structure.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240507170002.2269003-1-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
next_work is only used to make the work visible for
cancellation. Instead, we can just directly write to cur_work before
dropping the acct_lock and avoid the extra hop.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20240416021054.3940-3-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 361aee450c ("io-wq: add intermediate work step between pending
list and active work") closed a race between a cancellation and the work
being removed from the wq for execution. To ensure the request is
always reachable by the cancellation, we need to move it within the wq
lock, which also synchronizes the cancellation. But commit
42abc95f05 ("io-wq: decouple work_list protection from the big
wqe->lock") replaced the wq lock here and accidentally reintroduced the
race by releasing the acct_lock too early.
In other words:
worker | cancellation
work = io_get_next_work() |
raw_spin_unlock(&acct->lock); |
|
| io_acct_cancel_pending_work
| io_wq_worker_cancel()
worker->next_work = work
Using acct_lock is still enough since we synchronize on it on
io_acct_cancel_pending_work.
Fixes: 42abc95f05 ("io-wq: decouple work_list protection from the big wqe->lock")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20240416021054.3940-2-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io-wq will retry iopoll even when it failed with -EAGAIN. If that
races with task exit, which sets TIF_NOTIFY_SIGNAL for all its workers,
such workers might potentially infinitely spin retrying iopoll again and
again and each time failing on some allocation / waiting / etc. Don't
keep spinning if io-wq is dying.
Fixes: 561fb04a6a ("io_uring: replace workqueue usage with io-wq")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we setup the ring with SQPOLL, then that polling thread has its
own io-wq setup. This means that if the application uses
IORING_REGISTER_IOWQ_AFF to set the io-wq affinity, we should not be
setting it for the invoking task, but rather the sqpoll task.
Add an sqpoll helper that parks the thread and updates the affinity,
and use that one if we're using SQPOLL.
Fixes: fe76421d1d ("io_uring: allow user configurable IO thread CPU affinity")
Cc: stable@vger.kernel.org # 5.10+
Link: https://github.com/axboe/liburing/discussions/884
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All we really care about is finding a free worker. If said worker is
already running, it's either starting new work already or it's just
finishing up existing work. For the latter, we'll be finding this work
item next anyway, and for the former, if the worker does go to sleep,
it'll create a new worker anyway as we have pending items.
This reduces try_to_wake_up() overhead considerably:
23.16% -10.46% [kernel.kallsyms] [k] try_to_wake_up
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we check if we have work to run, we grab the acct lock, check,
drop it, and then return the result. If we do have work to run, then
running the work will again grab acct->lock and get the work item.
This causes us to grab acct->lock more frequently than we need to.
If we have work to do, have io_acct_run_queue() return with the acct
lock still acquired. io_worker_handle_work() is then always invoked
with the acct lock already held.
In a simple test cases that stats files (IORING_OP_STATX always hits
io-wq), we see a nice reduction in locking overhead with this change:
19.32% -12.55% [kernel.kallsyms] [k] __cmpwait_case_32
20.90% -12.07% [kernel.kallsyms] [k] queued_spin_lock_slowpath
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The worker free list is RCU protected, and checks for workers going away
when iterating it. There's no need to hold the wq->lock around the
lookup.
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A recent fix stopped clearing PF_IO_WORKER from current->flags on exit,
which meant that we can now call inc/dec running on the worker after it
has been removed if it ends up scheduling in/out as part of exit.
If this happens after an RCU grace period has passed, then the struct
pointed to by current->worker_private may have been freed, and we can
now be accessing memory that is freed.
Ensure this doesn't happen by clearing the task worker_private field.
Both io_wq_worker_running() and io_wq_worker_sleeping() check this
field before going any further, and we don't need any accounting etc
done after this worker has exited.
Fixes: fd37b88400 ("io_uring/io-wq: don't clear PF_IO_WORKER on exit")
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A recent commit gated the core dumping task exit logic on current->flags
remaining consistent in terms of PF_{IO,USER}_WORKER at task exit time.
This exposed a problem with the io-wq handling of that, which explicitly
clears PF_IO_WORKER before calling do_exit().
The reasons for this manual clear of PF_IO_WORKER is historical, where
io-wq used to potentially trigger a sleep on exit. As the io-wq thread
is exiting, it should not participate any further accounting. But these
days we don't need to rely on current->flags anymore, so we can safely
remove the PF_IO_WORKER clearing.
Reported-by: Zorro Lang <zlang@redhat.com>
Reported-by: Dave Chinner <david@fromorbit.com>
Link: https://lore.kernel.org/all/ZIZSPyzReZkGBEFy@dread.disaster.area/
Fixes: f9010dbdce ("fork, vhost: Use CLONE_THREAD to fix freezer/ps regression")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since the move to PF_IO_WORKER, we don't juggle memory context manually
anymore. Remove that outdated part of the comment for __io_worker_idle().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit 0654b05e7e65 ("io_uring: One wqe per wq"), we have just a
single io_wqe instance embedded per io_wq. Drop the extra structure in
favor of accessing struct io_wq directly, cleaning up quite a bit of
dereferences and backpointers.
No functional changes intended. Tested with liburing's testsuite
and mmtests performance microbenchmarks. I didn't observe any
performance regressions.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20230322011628.23359-2-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since we now have a single io_wqe per io_wq instead of per-node, and in
preparation to its removal, move the accounting into the parent
structure.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20230322011628.23359-2-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Right now io_wq allocates one io_wqe per NUMA node. As io_wq is now
bound to a task, the task basically uses only the NUMA local io_wqe, and
almost never changes NUMA nodes, thus, the other wqes are mostly
unused.
Allocate just one io_wqe embedded into io_wq, and uses all possible cpus
(cpu_possible_mask) in the io_wqe->cpumask.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20230310201107.4020580-1-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Every now and then reports come in that are puzzled on why changing
affinity on the io-wq workers fails with EINVAL. This happens because they
set PF_NO_SETAFFINITY as part of their creation, as io-wq organizes
workers into groups based on what CPU they are running on.
However, this is purely an optimization and not a functional requirement.
We can allow setting affinity, and just lazily update our worker to wqe
mappings. If a given io-wq thread times out, it normally exits if there's
no more work to do. The exception is if it's the last worker available.
For the timeout case, check the affinity of the worker against group mask
and exit even if it's the last worker. New workers should be created with
the right mask and in the right location.
Reported-by:Daniel Dao <dqminh@cloudflare.com>
Link: https://lore.kernel.org/io-uring/CA+wXwBQwgxB3_UphSny-yAP5b26meeOu1W4TwYVcD_+5gOhvPw@mail.gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have two types of task_work based creation, one is using an existing
worker to setup a new one (eg when going to sleep and we have no free
workers), and the other is allocating a new worker. Only the latter
should be freed when we cancel task_work creation for a new worker.
Fixes: af82425c6a ("io_uring/io-wq: free worker if task_work creation is canceled")
Reported-by: syzbot+d56ec896af3637bdb7e4@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we cancel the task_work, the worker will never come into existance.
As this is the last reference to it, ensure that we get it freed
appropriately.
Cc: stable@vger.kernel.org
Reported-by: 진호 <wnwlsgh98@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the CPU mask allocation for a node fails, then the memory allocated for
the 'io_wqe' struct of the current node doesn't get freed on the error
handling path, since it has not yet been added to the 'wqes' array.
This was spotted when fuzzing v6.1-rc1 with Syzkaller:
BUG: memory leak
unreferenced object 0xffff8880093d5000 (size 1024):
comm "syz-executor.2", pid 7701, jiffies 4295048595 (age 13.900s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000cb463369>] __kmem_cache_alloc_node+0x18e/0x720
[<00000000147a3f9c>] kmalloc_node_trace+0x2a/0x130
[<000000004e107011>] io_wq_create+0x7b9/0xdc0
[<00000000c38b2018>] io_uring_alloc_task_context+0x31e/0x59d
[<00000000867399da>] __io_uring_add_tctx_node.cold+0x19/0x1ba
[<000000007e0e7a79>] io_uring_setup.cold+0x1b80/0x1dce
[<00000000b545e9f6>] __x64_sys_io_uring_setup+0x5d/0x80
[<000000008a8a7508>] do_syscall_64+0x5d/0x90
[<000000004ac08bec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 0e03496d19 ("io-wq: use private CPU mask")
Cc: stable@vger.kernel.org
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20221020014710.902201-1-rafaelmendsr@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for splitting io_uring up a bit, move it into its own
top level directory. It didn't really belong in fs/ anyway, as it's
not a file system only API.
This adds io_uring/ and moves the core files in there, and updates the
MAINTAINERS file for the new location.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
