More error message cleanup: instead of multiple printk()s per error, we
want to be building up a single error message in a printbuf, so that it
can be printed with indenting that shows grouping and avoid errors
getting interspersed or lost in the log.
This gets rid of most calls to bch2_fs_emergency_read_only(). We still
have calls to
- bch2_fatal_error()
- bch2_fs_fatal_error()
- bch2_fs_fatal_err_on()
that need work.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We now more often do repair automatically, without the user invoking
fsck - and sometimes that can involve fixing lots of errors, so let's
avoid flooding the dmesg log.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Build up and emit the error message for an inconsistency error all at
once, instead of spread over multiple printk calls, so they're not
jumbled in the dmesg log.
Also, add better indenting.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Factor out a helper from __bch2_fsck_err(), for counting the error in
the superblock and deciding whether to print or ratelimit - will be used
to replace some log_fsck_err() calls, where we want to lift out printing
the error message.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
An inconsistency error often happens as part of an event with multiple
error messages, and we want to build up one single error message with
proper indenting to produce more readable log messages that don't get
garbled.
Add new helpers that emit messages to a printbuf instead of printing
them directly, next patch will convert to use them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We're improving our handling of write errors - we shouldn't write
degraded data just because a write failed once, we should retry it (on
other devices, if possible).
But for this to work, we need to kick devices out when they're only
returning errors - otherwise those retries will loop infinitely.
This adds a configurable timeout - if writes are failing for too long,
we'll set that device read-only.
In the future we should also implement more tracking and another knob
for an "allowed error rate", so that we can kick out drives that are
acting "unhealthy".
Another thing we'll want is a mechanism (likely in userspace) for
bringing a device back in after a transient error - perhaps a cable was
jiggled, or there was a controller reset.
After transient errors we also need a mechanism to walk (from the
journal) recent btree updates that weren't flushed to that device and
treat them as "degraded", since unflushed data may well not have been
written. Out of scope for this patch, but becoming relevant.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We need to start accounting successes for every IO, not just failures,
so introduce a unified hook for io completion accounting and convert
io_read.c.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
A user has been seeing the "error verifying existing checksum while
rewriting existing data (memory corruption?)" error.
This generally indicates a hardware issue (and that may be the case
here), but it might also indicate a bug, in which case we need more
information to look for patterns.
Reported-by: Roland Vet <vet.roland@protonmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
we're starting to use error messages with paths in fsck_errors(), where
we do not want nested transaction restart handling, so let's prepare for
that.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We want all error messages converted to print paths, not just inode
numbers - users want this information, and it speeds up debugging too.
Auditing and converting all error messages is going to be a big project,
so for the moment we're just doing this incrementally.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a function for walking backpointers to find a path from a given
inode number, and convert various error messages to use it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a new parameter to bkey validate functions, and use it to improve
invalid bkey error messages: we can now print the btree and depth it
came from, or if it came from the journal, or is a btree root.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Factor out a common helper, need_discard_or_freespace_err(), which is
now used by both fsck and the runtime checks, and can repair.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If we find an error that indicates that we need to run fsck, we can
specify that directly with run_explicit_recovery_pass().
These are now log_fsck_err() calls: we're just logging in the superblock
that an error occurred - and possibly doing an emergency shutdown,
depending on policy.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Newly generated keys, in the transaction commit path or write path,
should not be AUTOFIX; those indicate bugs that we need to fail fast
for.
Fixes: 5612daafb7 ("bcachefs: Fix fsck warnings from bkey validation")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
__bch2_fsck_err() warns if the current task has a btree_trans object and
it wasn't passed in, because if it has to prompt for user input it has
to be able to unlock it.
But plumbing the btree_trans through bkey_validate(), as well as
transaction restarts, is problematic - so instead make bkey fsck errors
FSCK_AUTOFIX, which doesn't need to warn.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bkey_fsck_err() was added as an interface that looks like fsck_err(),
but previously all it did was ensure that the appropriate error counter
was incremented in the superblock.
This is a cleanup and bugfix patch that converts it to a wrapper around
fsck_err(). This is needed to fix an issue with the upgrade path to
disk_accounting_v3, where the "silent fix" error list now includes
bkey_fsck errors; fsck_err() handles this in a unified way, and since we
need to change printing of bkey fsck errors from the caller to the inner
bkey_fsck_err() calls, this ends up being a pretty big change.
Als,, rename .invalid() methods to .validate(), for clarity, while we're
changing the function signature anyways (to drop the printbuf argument).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
fsck_err() now optionally takes a btree_trans; if the current thread has
one, it is required that it be passed.
The next patch will use this to unlock when waiting for user input.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
i.e. the start of automatic self healing:
If errors=continue or fix_safe, we now automatically fix simple errors
without user intervention.
New error action option: fix_safe
This replaces the existing errors=ro option, which gets a new slot, i.e.
existing errors=ro users now get errors=fix_safe.
This is currently only enabled for a limited set of errors - initially
just disk accounting; errors we would never not want to fix, and we
don't want to require user intervention (i.e. to make sure a bug report
gets filed).
Errors will still be counted in the superblock, so we (developers) will
still know they've been occuring if a bug report gets filed (as bug
reports typically include the errors superblock section).
Eventually we'll be enabling this for a much wider set of errors, after
we've done thorough error injection testing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Consolidate bch2_gc_check_topology() and btree_node_interior_verify(),
and replace them with an improved version,
bch2_btree_node_check_topology().
This checks that children of an interior node correctly span the full
range of the parent node with no overlaps.
Also, ensure that topology repairs at runtime are always a fatal error;
in particular, this adds a check in btree_iter_down() - if we don't find
a key while walking down the btree that's indicative of a topology error
and should be flagged as such, not a null ptr deref.
Some checks in btree_update_interior.c remaining BUG_ONS(), because we
already checked the node for topology errors when starting the update,
and the assertions indicate that we _just_ corrupted the btree node -
i.e. the problem can't be that existing on disk corruption, they
indicate an actual algorithmic bug.
In the future, we'll be annotating the fsck errors list with which
recovery pass corrects them; the open coded "run explicit recovery pass
or fatal error" in bch2_btree_node_check_topology() will in the future
be done for every fsck_err() call.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This converts -EIOs related to btree node errors to private error codes,
which will help with some ongoing debugging by giving us better error
messages.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch adds a superblock error counter for every distinct fsck
error; this means that when analyzing filesystems out in the wild we'll
be able to see what sorts of inconsistencies are being found and repair,
and hence what bugs to look for.
Errors validating bkeys are not yet considered distinct fsck errors, but
this patch adds a new helper, bkey_fsck_err(), in order to add distinct
error types for them as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We now track IO errors per device since filesystem creation.
IO error counts can be viewed in sysfs, or with the 'bcachefs
show-super' command.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Before, it was parsed as a bool but internally it was really an enum:
this lets us pass in all the possible values.
But we special case the option parsing: no supplied value is parsed as
FSCK_FIX_yes, to match the previous behaviour.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This changes the ask_yn() function used by fsck to accept Y or N,
meaning yes or no for all errors of a given type.
With this, the user can be prompted only for distinct error types -
useful when a filesystem has lots of errors.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When errors=panic, we need to dump transaction updates before calling
bch2_inconsistent_error().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Centralize format strings in bcachefs.h
- Add bch2_fmt_inum_offset() and related helpers
- Switch error messages for inodes to also print out the offset, in
bytes
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- factor out fsck_err_get()
- if the "bcachefs (%s):" prefix has already been applied, don't
duplicate it
- convert to printbufs instead of static char arrays
- tidy up control flow a bit
- use bch2_print_string_as_lines(), to avoid messages getting truncated
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a new error macro that also dumps transaction updates in addition to
doing an emergency shutdown - when a transaction update discovers or is
causing a fs inconsistency, it's helpful to see what updates it was
doing.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
It's unhelpful if we see "Halting mark and sweep to start topology
repair" but we don't see the error that triggered it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This splits out btree topology repair into a separate pass, and makes
some improvements:
- When we have to pick which of two overlapping nodes to drop keys
from, we use the btree node header sequence number to preserve the
newer node
- the gc code has been changed so that it doesn't bail out if we're
continuing/ignoring on fsck error - this way the dump tool can skip
running the repair pass but still walk all reachable metadata
- add a new superblock flag indicating when a filesystem is known to
have btree topology issues, and the topology repair pass should be
run
- changing the start/end of a node might mean keys in that node have to
be deleted: this patch handles that better by splitting it out into a
separate function and running it explicitly in the topology repair
code, previously those keys were only being dropped when the btree
node was read in.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
it's useful to know whether an error was for a read or a write - this
also standardizes error messages a bit more.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This also consolidates the various checks in bch2_mark_pointer() and
bch2_trans_mark_pointer().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
These have all been converted to fsck/inconsistent errors
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Initially forked from drivers/md/bcache, bcachefs is a new copy-on-write
filesystem with every feature you could possibly want.
Website: https://bcachefs.org
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
