refactoring the BTREE_ITER_WITH_UPDATES code, prep for removing the flag
and making it always-on
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
refactoring the BTREE_ITER_WITH_UPDATES code, prep for removing the flag
and making it always-on
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
XXX: we're allocating memory with btree locks held - bad
We need to plumb through an error path so we can do
allocate_dropping_locks() - but we're merging this now because it fixes
a transaction path overflow caused by indirect extent fragmentation, and
the resize path is rare.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Start to plumb through dynamically growable btree_paths; this patch
replaces most BTREE_ITER_MAX references with trans->nr_paths.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
the reflink triggers are also bumping up against the maximum number of
paths in a transaction - and generating proportional numbers of updates.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Some tweaks to greatly reduce locking overhead for the list of btree
transactions, so that it can always be enabled: leave btree_trans
objects on the list when they're on the percpu single item freelist,
and only check for duplicates in the same process when
CONFIG_BCACHEFS_DEBUG is enabled
- don't zero out the full btree_trans() unless we allocated it from
the mempool
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Upcoming patches are going to be changing trans->paths to a
reallocatable buffer. We need to guard against use after free when it's
used by other threads; this introduces RCU protection to those paths and
changes them to check for trans->paths == NULL
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
path->idx is now a code smell: we should be using path_idx_t, since it's
stable across btree path reallocation.
This is also a bit faster, using the same loop counter vs. fetching
path->idx from each path we iterate over.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In the future we'll be making trans->paths resizable and potentially
having _many_ more paths (for fsck); we need to start fixing algorithms
that walk each path in a transaction where possible.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Instead of using a darray, we now allocate journal entries for the
transaction commit path with our normal bump allocator - with an inlined
fastpath, and using btree_transaction_stats to remember how much to
initially allocate so as to avoid transaction restarts.
This is prep work for converting write buffer updates to use this
mechanism.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
These were for extra info in tracepoints for debugging a specialized
issue - we do not want to bloat btree_path for this, at least in release
builds.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In the CI, we're seeing tests failing due to excessive would_deadlock
transaction restarts - the tracepoint now includes the lock cycle that
occured.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now we can print out filesystem flags in sysfs, useful for debugging
various "what's my filesystem doing" issues.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
For BTREE_ITER_WITH_JOURNAL, we memoize lookups in the journal keys, to
avoid the binary search overhead.
Previously we stashed the pos of the last key returned from the journal,
in order to force the lookup to be redone when rewinding.
Now bch2_journal_keys_peek_upto() handles rewinding itself when
necessary - so we can slim down btree_iter.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
As discussed in the previous patch, BTREE_ITER_ALL_LEVELS appears to be
racy with concurrent interior node updates - and perhaps it is fixable,
but it's tricky and unnecessary.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
path->level was being read, but never used.
Reported-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
peek_upto() checks against the end position and bails out before
FILTER_SNAPSHOTS checks; this is because if we end up at a different
inode number than the original search key none of the keys we see might
be visibile in the current snapshot - we might be looking at inode in a
completely different subvolume.
But this is broken, because when we're iterating over extents we're
checking against the extent start position to decide when to bail out,
and the extent start position isn't monotonically increasing until after
we've run FILTER_SNAPSHOTS.
Fix this by adding a simple inode number check where the old bailout
check was, and moving the main check to the correct position.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reported-by: "Carl E. Thompson" <list-bcachefs@carlthompson.net>
When bch2_fs_alloc() gets an error before calling
bch2_fs_btree_iter_init(), bch2_fs_btree_iter_exit() makes an invalid
memory access because btree_trans_list is uninitialized.
Signed-off-by: Thomas Bertschinger <tahbertschinger@gmail.com>
Fixes: 6bd68ec266 ("bcachefs: Heap allocate btree_trans")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The btree iterator code overlays keys from the journal until journal
replay is finished; since we're now starting copygc/rebalance etc.
before replay is finished, this is multithreaded access and thus needs
refcounting.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This deletes the complicated and somewhat expensive journal
pre-reservation machinery in favor of just using journal watermarks:
when the journal is more than half full, we run journal reclaim more
aggressively, and when the journal is more than 3/4s full we only allow
journal reclaim to get new journal reservations.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
BTREE_INSERT_NOJOURNAL is primarily used for a performance optimization
related to inode updates and fsync - document it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The SRCU read lock that btree_trans takes exists to make it safe for
bch2_trans_relock() to deref pointers to btree nodes/key cache items we
don't have locked, but as a side effect it blocks reclaim from freeing
those items.
Thus, it's important to not hold it for too long: we need to
differentiate between bch2_trans_unlock() calls that will be only for a
short duration, and ones that will be for an unbounded duration.
This introduces bch2_trans_unlock_long(), to be used mainly by the data
move paths.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We should only be downgrading locks on success - otherwise, our
transaction restarts won't be getting the correct locks and we'll
livelock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since we can run with unknown btree IDs, we can't directly index btree
IDs into fixed size arrays.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We're using more stack than we'd like in a number of functions, and
btree_trans is the biggest object that we stack allocate.
But we have to do a heap allocatation to initialize it anyways, so
there's no real downside to heap allocating the entire thing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There are several spelling mistakes in error messages. Fix these.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This changes mark_btree_node_locked() to take an enum
btree_node_locked_type, not a six_lock_type, since BTREE_NODE_UNLOCKED
is -1 which may cause problems converting back and forth to
six_lock_type if short enums are in use.
With this change, we never store BTREE_NODE_UNLOCKED in a six_lock_type
enum.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
subvolume.c has gotten a bit large, this splits out a separate file just
for managing snapshot trees - BTREE_ID_snapshots.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a bug in the cycle detector, bch2_check_for_deadlock() - we
have to make sure the node pointers in the btree paths array are set to
something not-garbage before another thread may see them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Split out a new file from recovery.c for managing the list of keys we
read from the journal: before journal replay finishes the btree iterator
code needs to be able to iterate over and return keys from the journal
as well, so there's a fair bit of code here.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
clang had a few more warnings about enum conversion, and also didn't
like the opts.c initializer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- endianness fixes
- mark some things static
- fix a few __percpu annotations
- fix silent enum conversions
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We need to allow filesystems with metadata from newer versions to be
mountable and usable by older versions.
This patch enables us to roll out new btrees without a new major version
number; we can now handle btree roots for unknown btree types.
The unknown btree roots will be retained, and fsck (including
backpointers) will check them, the same as other btree types.
We add a dynamic array for the extra, unknown btree roots, in addition
to the fixed size btree root array, and add new helpers for looking up
btree roots.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We can't be holding btree_trans_lock while copying to user space, which
might incur a page fault. To fix this, convert it to a seqmutex so we
can unlock/relock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Using drop_locks_do() ensures that every unlock() is paired with a
relock(), with proper error checking.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When allocating memory, gfp flags should generally be
- GFP_NOWAIT|__GFP_NOWARN if btree locks are held
- GFP_NOFS if in the IO path or otherwise holding resources needed for
IO submission
- GFP_KERNEL otherwise
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a new helper for the common pattern of:
- trans_unlock()
- do something
- trans_relock()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_btree_trans_to_text() is used on btree_trans objects that are owned
by different threads - when printing out deadlock cycles - so we need a
safe version of trans_for_each_path(), else we race with seeing a
btree_path that was just allocated and not fully initialized:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
As suggested by Linus, this drops the six_lock_state union in favor of
raw bitmasks.
On the one hand, bitfields give more type-level structure to the code.
However, a significant amount of the code was working with
six_lock_state as a u64/atomic64_t, and the conversions from the
bitfields to the u64 were deemed a bit too out-there.
More significantly, because bitfield order is poorly defined (#ifdef
__LITTLE_ENDIAN_BITFIELD can be used, but is gross), incrementing the
sequence number would overflow into the rest of the bitfield if the
compiler didn't put the sequence number at the high end of the word.
The new code is a bit saner when we're on an architecture without real
atomic64_t support - all accesses to lock->state now go through
atomic64_*() operations.
On architectures with real atomic64_t support, we additionally use
atomic bit ops for setting/clearing individual bits.
Text size: 7467 bytes -> 4649 bytes - compilers still suck at
bitfields.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_path_put_nokeep() is sketchy, and we should consider removing it:
it unconditionally frees btree_paths once their ref hits 0.
The assumption is that we only use it for paths that have never been
visible outside the btree core btree code; i.e. higher level code will
never be making assumptions about locking based on these paths.
However, there's subtle brokenness with this approach:
- If we call bch2_path_put(), then bch2_path_put_nokeep(),
bch2_path_put() may free the first path on the assumption that we we
have another path keeping a node locked - but then
bch2_path_put_nokeep() just unconditionally frees it.
The same bug may arise if we're calling bch2_path_put() and
bch2_path_put_nokeep() on the same (refcounted) path, or two adjacent
paths that point to the same btree node.
This patch hacks around one of these bugs by calling
bch2_path_put_nokeep() first in bch2_trans_iter_exit.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds private error codes for most (but not all) of our ENOMEM uses,
which makes it easier to track down assorted allocation failures.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Soon, __bch2_btree_node_write() is going to require a btree_trans: zoned
device support is going to require a new allocation for every btree node
write. This is a bit of prep work.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
A thread should never be using more than one btree_trans - doing so is
an invitation for deadlocks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds a new method of doing btree updates - a straight write buffer,
implemented as a flat fixed size array.
This is only useful when we don't need to read from the btree in order
to do the update, and when reading is infrequent - perfect for the LRU
btree.
This will make LRU btree updates fast enough that we'll be able to use
it for persistently indexing buckets by fragmentation, which will be a
massive boost to copygc performance.
Changes:
- A new btree_insert_type enum, for btree_insert_entries. Specifies
btree, btree key cache, or btree write buffer.
- bch2_trans_update_buffered(): updates via the btree write buffer
don't need a btree path, so we need a new update path.
- Transaction commit path changes:
The update to the btree write buffer both mutates global, and can
fail if there isn't currently room. Therefore we do all write buffer
updates in the transaction all at once, and also if it fails we have
to revert filesystem usage counter changes.
If there isn't room we flush the write buffer in the transaction
commit error path and retry.
- A new persistent option, for specifying the number of entries in the
write buffer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When we unlock in order to submit IO, the next relock event is likely to
fail if submit_bio() blocked - we shouldn't those events in our _fail
stats, since those are expected events and shouldn't cause test
failures.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We need to call bch2_trans_update_max_paths() before marking the new
path as allocated, since we're not initializing it yet.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It's important that in BTREE_ITER_FILTER_SNAPSHOTS mode we always use
peek_upto() and provide an end for the interval we're searching for -
otherwise, when we hit the end of the inode the next inode be in a
different subvolume and not have any keys in the current snapshot, and
we'd iterate over arbitrarily many keys before returning one.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This uses the new _ip() interface to six locks and hooks it up to
btree_path->ip_allocated, when available.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This replaces various BUG_ON() assertions with panics that tell us where
the restart was done and the restart type.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In debug mode, we now track where btree iterators and paths are
initialized/allocated - helpful in tracking down btree path overflows.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is something we need to do more widely: instead of bothering with
GFP_NOIO/GFP_NOFS, if we need to allocate memory while holding locks:
- first attempt the allocation with GFP_NOWAIT
- if that fails, drop btree locks with bch2_trans_unlock(), then
retry with GFP_KERNEL.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We need to take a ref on a path while we're traversing it: this fixes a
bug with paths getting reused while being traversed, in the key cache
fill code.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
While a btree transaction is running, we hold a SRCU read lock on the
btree key cache that prevents btree key cache keys from being freed -
this is so that relock() operations won't access freed memory.
The downside of this is that long running btree transactions prevent
memory from being freed from the key cache. This adds a check in
bch2_trans_begin() - if the transaction has been running longer than 1
second, drop and retake the SRCU read lock and zero out pointers to
unlock key cache paths.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When we started stashing the key being overwritten in
btree_insert_entry, this introduced a typical iterator invalidation
problem, triggered by btree node splits or resorts.
Previously, dealt with this by unconditionally re-validating those
stashed pointers in the transaction commit path. This patch gets rid of
that by doing it only when needed, in bch2_trans_node_add() or
bch2_trans_node_reinit_iter().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_btree_iter_peek_upto() in snapshots mode may need to keep a
btree_path for the insert position, not just the position of the key
we're returning. The code was incorrectly assuming this would be in the
same btree node - we were missing a bch2_btree_path_traverse() call.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a (harmless) broken invariant in __bch2_btree_path_set_pos():
iterators to interior nodes should point to the first non whiteout.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This switches btree_key_cache_fill() to use a btree iterator, not a
btree path, so that it can search for keys in previous snapshots.
We also add another iterator flag, BTREE_ITER_KEY_CACHE_FILL, to avoid
recursion back into the key cache.
This will allow us to re-enable the key cache for inodes in the next
patch.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There was no reason for this to be a separate helper - we always want
the relock call that btree_trans_peek_key_cache() did.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch introduces
- bpos_eq()
- bpos_lt()
- bpos_le()
- bpos_gt()
- bpos_ge()
and equivalent replacements for bkey_cmp().
Looking at the generated assembly these could probably be improved
further, but we already see a significant code size improvement with
this patch.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When flags & btree_id are constants, we can constant fold the entire
calculation of the actual iterator flags - and the whole thing becomes
small enough to inline.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Marking a non-static function as inline doesn't actually work and is
now causing problems - drop that
- Introduce BCACHEFS_LOG_PREFIX for when we want to prefix log messages
with bcachefs (filesystem name)
- Userspace doesn't have real percpu variables (maybe we can get this
fixed someday), put an #ifdef around bch2_disk_reservation_add()
fastpath
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
btree_path_copy() doesn't need to call
bch2_btree_path_check_sort_fast() - the newly allocated path will always
be in the correct position, post copy; also delete some redundant
branches from __bch2_btree_path_make_mut().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Don't call into bch2_encrypt_bio() when we're not encrypting
- Pull slowpath out of trans_lock_write()
- Make sure bc2h_trans_journal_res_get() gets inlined.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- In the btree iterator code that overlays keys from the journal, we
were incorrectly specifying level=0 instead of the btree_path's
current level in a few places
- When we didn't do journal replay, we shouldn't free the journal keys:
this fixes cmd_list and cmd_dump, which run in norecovery mode
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This moves the JOURNAL_REPLAY_DONE flag check from
bch2_trans_iter_init() to bch2_trans_init(), where we stash a copy in
btree_trans - gaining us a small performance improvement.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
checkpatch.pl gives lots of warnings that we don't want - suggested
ignore list:
ASSIGN_IN_IF
UNSPECIFIED_INT - bcachefs coding style prefers single token type names
NEW_TYPEDEFS - typedefs are occasionally good
FUNCTION_ARGUMENTS - we prefer to look at functions in .c files
(hopefully with docbook documentation), not .h
file prototypes
MULTISTATEMENT_MACRO_USE_DO_WHILE
- we have _many_ x-macros and other macros where
we can't do this
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now we store the transaction's fn idx in a local variable, instead of
redoing the lookup every time we call bch2_trans_init().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
local_clock() isn't always completely accurate - e.g. on machines with
TSC drift - but ktime_get_ns() overhead is too high, unfortunately.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We were forgetting to count down the number of nodes to prefetch, firing
off _way_ more than intended - whoops.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In the drop_alloc tests, we may end up calling
bch2_btree_iter_peek_slot() on an interior level that doesn't exist.
Previously, this would hit the path->uptodate assertion in
bch2_btree_path_peek_slot(); this path first checks a NULL btree node,
which is how we know we're at the end of the btree.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The btree iterator code may allocate extra btree paths, temporarily,
that do not refer to keys being returned: we don't need to wait until
transaction restart to drop these, when they're not referenced they
should be deleted right away.
This fixes a transaction path overflow bug.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There was a rare bug when path->locks_want was nonzero, but not
BTREE_MAX_DEPTH, where we'd return on a valid node that wasn't locked -
oops.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This function is fairly small and only used in two places: one very hot,
the other cold, so it should definitely be inlined.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- move slowpath code to a separate function, btree_path_overflow()
- no need to use hweight64
- copy nr_max_paths from btree_transaction_stats to btree_trans,
avoiding a data dependency in the fast path
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds a helper for printing a large buffer one line at a time, to
avoid the 1k printk limit.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Most of the node_relock_fail trace events are generated from
bch2_btree_path_verify_level(), when debugcheck_iterators is enabled -
but we're not interested in these trace events, they don't indicate that
we're in a slowpath.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In the event that we're not finished debugging the cycle detector, this
adds a new file to debugfs that shows what the cycle detector finds, if
anything. By comparing this with btree_transactions, which shows held
locks for every btree_transaction, we'll be able to determine if it's
the cycle detector that's buggy or something else.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We've outgrown our own deadlock avoidance strategy.
The btree iterator API provides an interface where the user doesn't need
to concern themselves with lock ordering - different btree iterators can
be traversed in any order. Without special care, this will lead to
deadlocks.
Our previous strategy was to define a lock ordering internally, and
whenever we attempt to take a lock and trylock() fails, we'd check if
the current btree transaction is holding any locks that cause a lock
ordering violation. If so, we'd issue a transaction restart, and then
bch2_trans_begin() would re-traverse all previously used iterators, but
in the correct order.
That approach had some issues, though.
- Sometimes we'd issue transaction restarts unnecessarily, when no
deadlock would have actually occured. Lock ordering restarts have
become our primary cause of transaction restarts, on some workloads
totally 20% of actual transaction commits.
- To avoid deadlock or livelock, we'd often have to take intent locks
when we only wanted a read lock: with the lock ordering approach, it
is actually illegal to hold _any_ read lock while blocking on an intent
lock, and this has been causing us unnecessary lock contention.
- It was getting fragile - the various lock ordering rules are not
trivial, and we'd been seeing occasional livelock issues related to
this machinery.
So, since bcachefs is already a relational database masquerading as a
filesystem, we're stealing the next traditional database technique and
switching to a cycle detector for avoiding deadlocks.
When we block taking a btree lock, after adding ourself to the waitlist
but before sleeping, we do a DFS of btree transactions waiting on other
btree transactions, starting with the current transaction and walking
our held locks, and transactions blocking on our held locks.
If we find a cycle, we emit a transaction restart. Occasionally (e.g.
the btree split path) we can not allow the lock() operation to fail, so
if necessary we'll tell another transaction that it has to fail.
Result: trans_restart_would_deadlock events are reduced by a factor of
10 to 100, and we'll be able to delete a whole bunch of grotty, fragile
code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
With the new deadlock cycle detector, it's critical that all held locks
be marked in a btree_path, because that's what the cycle detector
traverses - any locks that aren't correctly marked will cause deadlocks.
This changes the btree_path to allocate some btree_paths for the new
nodes, since until the final update is done we otherwise don't have a
path referencing them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
With the upcoming cycle detector, we have to be careful about using
btree_node_lock_nopath - in particular, using it to take write locks can
cause deadlocks.
All held locks need to be tracked in a btree_path, so that the cycle
detector knows about them - unless we know that we cannot cause
deadlocks for other reasons: e.g. we are only taking read locks, or
we're in very early fsck (topology repair).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a type descriptor to btree_bkey_cached_common - there's no reason
not to since we've got padding that was otherwise unused, and this is a
nice cleanup (and helpful in later patches).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Also, do some reorganizing/renaming, convert atomic counters in bch_fs
to persistent counters, and add a few missing counters.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Improve our debugfs output, to help in debugging deadlocks: this shows,
for every btree node we print, the current number of readers/intent
locks/write locks held.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch
- tracks maximum bch2_trans_kmalloc() memory used in btree_transaction_stats
- makes it available in debugfs
- switches bch2_trans_init() to using that for the amount of memory to
preallocate, instead of the parameter passed in
This drastically reduces transaction restarts, and means we no longer
need to track this in the source code.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, we used two different bit arrays for tracking held btree
node locks. This patch switches to an array of two bit integers, which
will let us track, in a future patch, when we hold a write lock.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Held btree locks are tracked in btree_path->nodes_locked and
btree_path->nodes_intent_locked. Upcoming patches are going to change
the representation in struct btree_path, so this patch switches to
proper helpers instead of direct access to these fields.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Start to centralize some of the locking code in a new file; more locking
code will be moving here in the future.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
- fsck_inode_rm() wasn't returning BCH_ERR_transaction_restart_nested
- change bch2_trans_verify_not_restarted() to call panic() - we don't
want these errors to be missed
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
iter->k needs to be consistent with iter->pos - required for
bch2_btree_iter_(rewind|advance) to work correctly.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
When returning a key from the key cache, in BTREE_ITER_WITH_KEY_CACHE
mode, we don't want to set should_be_locked on iter->path; we're not
returning a key from that path, so we donn't need to, and also since we
traversed the key cache iterator before setting should_be_locked on that
path it might be unlocked (if we unlocked, bch2_trans_relock() won't
have relocked it).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
We should be calling btree_node_mem_ptr_set() before path_level_init(),
since we already touched the key that btree_node_mem_ptr_set() will
modify and path_level_init() will be doing the lookup in the child btree
node we're recursing to.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Instead of counting transaction restarts, count when the transaction is
restarted: if bch2_trans_begin() was called when the transaction wasn't
restarted we need to ensure restart_count is still incremented.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
We need a way to check if the machinery for handling btree_paths with in
a transaction is behaving reasonably, as it often has not been - we've
had bugs with transaction path overflows caused by duplicate paths and
plenty of other things.
This patch tracks, per transaction fn, the most btree paths ever
allocated by that transaction and makes it available in debugfs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Going to be adding more things to this in the next patch.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
