Introduce the pwrseq-thead-gpu driver, a power sequencer provider for
the Imagination BXM-4-64 GPU on the T-HEAD TH1520 SoC. This driver
controls an auxiliary device instantiated by the AON power domain.
The TH1520 GPU requires a specific sequence to correctly initialize and
power down its resources:
- Enable GPU clocks (core and sys).
- De-assert the GPU clock generator reset (clkgen_reset).
- Introduce a short hardware-required delay.
- De-assert the GPU core reset. The power-down sequence performs these
steps in reverse.
Implement this sequence via the pwrseq_power_on and pwrseq_power_off
callbacks.
Crucially, the driver's match function is called when a consumer (the
Imagination GPU driver) requests the "gpu-power" target. During this
match, the sequencer uses clk_bulk_get() and
reset_control_get_exclusive() on the consumer's device to obtain handles
to the GPU's "core" and "sys" clocks, and the GPU core reset. These,
along with clkgen_reset obtained from parent aon node, allow it to
perform the complete sequence.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250623-apr_14_for_sending-v6-1-6583ce0f6c25@samsung.com
[Bartosz: use a ternary operator instead of implicitly casting the
result of a boolean expression to int]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver uses various OF-specific functions and depends on phandle
parsing. There's no reason to make it available to non-OF systems so add
a relevant dependency switch to its Kconfig entry.
Fixes: 2f1630f437 ("power: pwrseq: add a driver for the PMU module on the QCom WCN chipsets")
Link: https://lore.kernel.org/r/20241004130449.51725-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This adds the power sequencing driver for the PMU modules present on the
Qualcomm WCN Bluetooth and Wifi chipsets. It uses the pwrseq subsystem
and knows how to match the sequencer to the consumer device by verifying
the relevant properties and DT layout. Using this driver will allow the
BT and WLAN drivers to respect the required delays between enabling the
two modules.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240605123850.24857-3-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Implement the power sequencing subsystem allowing devices to share
complex powering-up and down procedures. It's split into the consumer
and provider parts but does not implement any new DT bindings so that
the actual power sequencing is never revealed in the DT representation.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240605123850.24857-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>