Starting with commit c141ecc3ce ("of: Warn when of_property_read_bool()
is used on non-boolean properties"), probing the gpcv2 device on i.MX8M
SoCs leads to warnings when LOCKDEP is enabled.
Fix this by checking property presence with of_property_present as
intended.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20250218-gpcv2-of-property-present-v1-1-3bb1a9789654@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the pmdomain fixes for v6.13-rc[n] into the next branch, to allow them
to get tested together with the new changes that are targeted for v6.14.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
imx_gpcv2_probe() leaks an OF node reference obtained by
of_get_child_by_name(). Fix it by declaring the device node with the
__free(device_node) cleanup construct.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 03aa12629f ("soc: imx: Add GPCv2 power gating driver")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Cc: stable@vger.kernel.org
Message-ID: <20241215030159.1526624-1-joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The gpcv2 drivers on imx8m series are registered as platform
devices and this opens the possibility of reloading the driver
at runtime.
But this doesn't actually work. There are some hardware sequence
dependecy between blk ctrl and gpc, also power domains are used
by other peripherals, so fix this by explicitly suppressing bind
attrs.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-ID: <20241206112731.98244-2-peng.fan@oss.nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
- Fix a couple of memory-leaks during genpd init/remove
pmdomain providers:
- imx: Adjust delay for gpcv2 to fix power up handshake
- mediatek: Fix DT bindings by adding another nested power-domain layer
-----BEGIN PGP SIGNATURE-----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=fCUR
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"Core:
- Fix a couple of memory-leaks during genpd init/remove
Providers:
- imx: Adjust delay for gpcv2 to fix power up handshake
- mediatek: Fix DT bindings by adding another nested power-domain
layer"
* tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: gpcv2: Adjust delay after power up handshake
pmdomain: core: Fix error path in pm_genpd_init() when ida alloc fails
pmdomain: core: Add missing put_device()
dt-bindings: power: mediatek: Add another nested power-domain layer
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The patch standardizes the probe() code by replacing the two occurrences
of dev_err() with dev_err_probe(). Indeed, dev_err_probe() was used in all
other error paths of the probe() function.
Note that dev_err_probe() has advantages even if the error code is not
EPROBE_DEFER, such as the symbolic output of the error code. Therefore,
it should generally be preferred over dev_err().
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Message-ID: <20241025160430.4113467-1-dario.binacchi@amarulasolutions.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
AudioMix BLK-CTRL on i.MX8MP encountered an accessing register issue
after power up.
[ 2.181035] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 2.181038] CPU: 1 PID: 48 Comm: kworker/u16:2 Not tainted 6.9.0-rc5-next-20240424-00003-g21cec88845c6 #171
[ 2.181047] Hardware name: NXP i.MX8MPlus EVK board (DT)
[ 2.181050] Workqueue: events_unbound deferred_probe_work_func
[ 2.181064] Call trace:
[...]
[ 2.181142] arm64_serror_panic+0x6c/0x78
[ 2.181149] do_serror+0x3c/0x70
[ 2.181157] el1h_64_error_handler+0x30/0x48
[ 2.181164] el1h_64_error+0x64/0x68
[ 2.181171] clk_imx8mp_audiomix_runtime_resume+0x34/0x44
[ 2.181183] __genpd_runtime_resume+0x30/0x80
[ 2.181195] genpd_runtime_resume+0x110/0x244
[ 2.181205] __rpm_callback+0x48/0x1d8
[ 2.181213] rpm_callback+0x68/0x74
[ 2.181224] rpm_resume+0x468/0x6c0
[ 2.181234] __pm_runtime_resume+0x50/0x94
[ 2.181243] pm_runtime_get_suppliers+0x60/0x8c
[ 2.181258] __driver_probe_device+0x48/0x12c
[ 2.181268] driver_probe_device+0xd8/0x15c
[ 2.181278] __device_attach_driver+0xb8/0x134
[ 2.181290] bus_for_each_drv+0x84/0xe0
[ 2.181302] __device_attach+0x9c/0x188
[ 2.181312] device_initial_probe+0x14/0x20
[ 2.181323] bus_probe_device+0xac/0xb0
[ 2.181334] deferred_probe_work_func+0x88/0xc0
[ 2.181344] process_one_work+0x150/0x290
[ 2.181357] worker_thread+0x2f8/0x408
[ 2.181370] kthread+0x110/0x114
[ 2.181381] ret_from_fork+0x10/0x20
[ 2.181391] SMP: stopping secondary CPUs
According to comments in power up handshake:
/* request the ADB400 to power up */
if (domain->bits.hskreq) {
regmap_update_bits(domain->regmap, domain->regs->hsk,
domain->bits.hskreq, domain->bits.hskreq);
/*
* ret = regmap_read_poll_timeout(domain->regmap, domain->regs->hsk, reg_val,
* (reg_val & domain->bits.hskack), 0,
* USEC_PER_MSEC);
* Technically we need the commented code to wait handshake. But that needs
* the BLK-CTL module BUS clk-en bit being set.
*
* There is a separate BLK-CTL module and we will have such a driver for it,
* that driver will set the BUS clk-en bit and handshake will be triggered
* automatically there. Just add a delay and suppose the handshake finish
* after that.
*/
}
The BLK-CTL module needs to add delay to wait for a handshake request finished.
For some BLK-CTL module (eg. AudioMix on i.MX8MP) doesn't have BUS clk-en
bit, it is better to add delay in this driver, as the BLK-CTL module doesn't
need to care about how it is powered up.
regmap_read_bypassed() is to make sure the above write IO transaction already
reaches target before udelay().
Fixes: 1496dd413b ("clk: imx: imx8mp: Add pm_runtime support for power saving")
Reported-by: Francesco Dolcini <francesco@dolcini.it>
Closes: https://lore.kernel.org/all/66293535.170a0220.21fe.a2e7@mx.google.com/
Suggested-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Tested-by: Adam Ford <aford173@gmail.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/1715396125-3724-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231124080623.564924-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It has been pointed out that naming a subsystem "genpd" isn't very
self-explanatory and the acronym itself that means Generic PM Domain, is
known only by a limited group of people.
In a way to improve the situation, let's rename the subsystem to pmdomain,
which ideally should indicate that this is about so called Power Domains or
"PM domains" as we often also use within the Linux Kernel terminology.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230912221127.487327-1-ulf.hansson@linaro.org
