As the kemdup could return NULL, it should be better to check the return
value and return error if fails.
Moreover, the return value of prestera_acl_ruleset_keymask_set() should
be checked by cascade.
Fixes: 604ba23090 ("net: prestera: flower template support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Taras Chornyi<tchornyi@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
matchall rules can be added only to chain 0 and their priorities have
limitations:
- new matchall ingress rule's priority must be higher (lower value)
than any existing flower rule;
- new matchall egress rule's priority must be lower (higher value)
than any existing flower rule.
The opposite works for flower rule adding:
- new flower ingress rule's priority must be lower (higher value)
than any existing matchall rule;
- new flower egress rule's priority must be higher (lower value)
than any existing matchall rule.
This is a hardware limitation and thus must be properly handled in
driver by reporting errors to the user when newly added rule has such a
priority that cannot be installed into the hardware.
To achieve this, the driver must maintain both min/max matchall
priorities for every flower block when user adds/deletes a matchall
rule, as well as both min/max flower priorities for chain 0 for every
adding/deletion of flower rules for chain 0.
Cc: Serhiy Boiko <serhiy.boiko@plvision.eu>
Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following is now supported:
$ tc qdisc add PORT clsact
$ tc filter add dev PORT egress ...
Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Add HW api to configure policer:
- SR TCM policer mode is only supported for now.
- Policer ingress/egress direction support.
- Add police action support into flower
Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu>
Link: https://lore.kernel.org/r/1651061148-21321-1-git-send-email-volodymyr.mytnyk@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support of rule offloading added to the non-zero index chain,
which was previously forbidden. Also, goto action is offloaded
allowing to jump for processing of desired chain.
Note that only implicit chain 0 is bound to the device port(s) for
processing. The rest of chains have to be jumped by actions.
Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add user template explicit support. At this moment, max
TCAM rule size is utilized for all rules, doesn't matter
which and how much flower matches are provided by user. It
means that some of TCAM space is wasted, which impacts
the number of filters that can be offloaded.
Introducing the template, allows to have more HW offloaded
filters by specifying the template explicitly.
Example:
tc qd add dev PORT clsact
tc chain add dev PORT ingress protocol ip \
flower dst_ip 0.0.0.0/16
tc filter add dev PORT ingress protocol ip \
flower skip_sw dst_ip 1.2.3.4/16 action drop
NOTE: chain 0 is the default chain id for "tc chain" & "tc filter"
command, so it is omitted in the example above.
This patch adds only template support for default chain 0 suppoerted
by prestera driver at this moment. Chains are not supported yet,
and will be added later.
Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make flower to use counter API to get rule HW statistics.
Co-developed-by: Serhiy Boiko <serhiy.boiko@marvell.com>
Signed-off-by: Serhiy Boiko <serhiy.boiko@marvell.com>
Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add counter API for getting HW statistics.
- HW statistics gathered by this API are deleyed.
- Batch of conters is supported.
- acl stat is supported.
Co-developed-by: Serhiy Boiko <serhiy.boiko@marvell.com>
Signed-off-by: Serhiy Boiko <serhiy.boiko@marvell.com>
Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Add new vTCAM HW API to configure HW ACLs.
- Migrate acl to use new vTCAM HW API.
- No counter support in this patch-set.
Co-developed-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Introduce matchall filter support
- Add SPAN API to configure port mirroring.
- Add tc mirror action.
At this moment, only mirror (egress) action is supported.
Example:
tc filter ... action mirred egress mirror dev DEV
Co-developed-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu>
Signed-off-by: Vadym Kochan <vkochan@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
