Commit Graph

108 Commits

Author SHA1 Message Date
Lu Baolu
0c5f6c0d82 iommu/vt-d: Fix kdump kernels boot failure with scalable mode
The translation table copying code for kdump kernels is currently based
on the extended root/context entry formats of ECS mode defined in older
VT-d v2.5, and doesn't handle the scalable mode formats. This causes
the kexec capture kernel boot failure with DMAR faults if the IOMMU was
enabled in scalable mode by the previous kernel.

The ECS mode has already been deprecated by the VT-d spec since v3.0 and
Intel IOMMU driver doesn't support this mode as there's no real hardware
implementation. Hence this converts ECS checking in copying table code
into scalable mode.

The existing copying code consumes a bit in the context entry as a mark
of copied entry. It needs to work for the old format as well as for the
extended context entries. As it's hard to find such a common bit for both
legacy and scalable mode context entries. This replaces it with a per-
IOMMU bitmap.

Fixes: 7373a8cc38 ("iommu/vt-d: Setup context and enable RID2PASID support")
Cc: stable@vger.kernel.org
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Wen Jin <wen.jin@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220817011035.3250131-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-09-07 15:14:55 +02:00
Lu Baolu
ba949f4cd4 iommu/vt-d: Refactor iommu information of each domain
When a DMA domain is attached to a device, it needs to allocate a domain
ID from its IOMMU. Currently, the domain ID information is stored in two
static arrays embedded in the domain structure. This can lead to memory
waste when the driver is running on a small platform.

This optimizes these static arrays by replacing them with an xarray and
consuming memory on demand.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220702015610.2849494-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-15 10:21:41 +02:00
Lu Baolu
c3f27c834a iommu/vt-d: Remove unused domain_get_iommu()
It is not used anywhere. Remove it to avoid dead code.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220702015610.2849494-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-15 10:21:40 +02:00
Lu Baolu
5eaafdf0c0 iommu/vt-d: Convert global spinlock into per domain lock
Using a global device_domain_lock spinlock to protect per-domain device
tracking lists is an inefficient way, especially considering this lock
is also needed in the hot paths. This optimizes the locking mechanism
by converting the global lock to per domain lock.

On the other hand, as the device tracking lists are never accessed in
any interrupt context, there is no need to disable interrupts while
spinning. Replace irqsave variant with spinlock calls.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220706025524.2904370-12-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-15 10:21:39 +02:00
Lu Baolu
8ac0b64b97 iommu/vt-d: Use pci_get_domain_bus_and_slot() in pgtable_walk()
Use pci_get_domain_bus_and_slot() instead of searching the global list
to retrieve the pci device pointer. This also removes the global
device_domain_list as there isn't any consumer anymore.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220706025524.2904370-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-15 10:21:35 +02:00
Lu Baolu
983ebe57b3 iommu/vt-d: debugfs: Remove device_domain_lock usage
The domain_translation_struct debugfs node is used to dump the DMAR page
tables for the PCI devices. It potentially races with setting domains to
devices. The existing code uses the global spinlock device_domain_lock to
avoid the races.

This removes the use of device_domain_lock outside of iommu.c by replacing
it with the group mutex lock. Using the group mutex lock is cleaner and
more compatible to following cleanups.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220706025524.2904370-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-15 10:21:33 +02:00
Lu Baolu
9f18abab60 iommu/vt-d: Remove unused iovad from dmar_domain
Not used anywhere. Cleanup it to avoid dead code.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220527053424.3111186-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-15 10:21:33 +02:00
Lu Baolu
2585a2790e iommu/vt-d: Move include/linux/intel-iommu.h under iommu
This header file is private to the Intel IOMMU driver. Move it to the
driver folder.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220514014322.2927339-8-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-15 10:21:31 +02:00