This mouse has a horizontal wheel that requires special handling.
Without this patch, the horizontal wheel acts like a vertical wheel.
In the output of `hidrd-convert` for this mouse, there is a
`Usage (B8h)` field. It corresponds to a byte in packets sent by the
device that specifies which wheel generated an input event.
The name "A4TECH" is spelled in all capitals on the company website.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Just like the K12A the Dell K15A keyboard-dock has problems with
get_feature requests. This sometimes leads to several
"failed to fetch feature 8" messages getting logged, after which the
touchpad may or may not work.
Just like the K15A these errors are triggered by undocking and docking
the tablet.
There also seem to be other problems when undocking and then docking again
in quick succession. It seems that in this case the keyboard-controller
still retains some power from capacitors and does not go through a
power-on-reset leaving it in a confuses state, symptoms of this are:
1. The USB-ids changing to 048d:8910
2. Failure to read the HID descriptors on the second (mouse) USB intf.
3. The touchpad freezing after a while
These problems can all be cleared by undocking the keyboard and waiting
a full minute before redocking it. Unfortunately there is nothing we can
do about this in the kernel.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Saitek X65 joystick has a pair of axes that were used as mouse
pointer controls by the Windows driver. The corresponding usage page is
the Game Controls page, which is not recognized by the generic HID
driver, and therefore, both axes get mapped to ABS_MISC. The quirk makes
the second axis get mapped to ABS_MISC+1, and therefore made available
separately.
Signed-off-by: Nirenjan Krishnan <nirenjan@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A number of USB keyboards, using the Semitek firmware, are capable of
handling arbitrary N-key rollover, but due to a buggy report
descriptor, keys beyond the sixth cannot be detected by the generic
HID driver.
There are numerous hardware variants sold by several vendors, mostly
using generic names like "GK61" for the 61-key version. These
keyboards are sometimes known collectively as the "GK6X" series.
The keyboard has three USB interfaces. Interface 0 uses the standard
HID boot protocol, limited to eight modifier keys and six normal keys;
interface 2 uses a custom report format that permits any number of
keys. If more than six keys are pressed simultaneously, the first six
are reported via interface 0 while subsequent keys are reported via
interface 2.
(Interface 1 uses a custom protocol for reprogramming the keyboard;
this can be controlled through userspace tools and is not of concern
for the present driver.)
The report descriptor for interface 2, however, is incorrect (for
report ID 0x04, the input field is marked as "array" rather than
"variable".) The descriptor appears to be correct in other respects,
so we simply replace the incorrect byte before parsing the descriptor.
Signed-off-by: Benjamin Moody <bmoody@member.fsf.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The FTDI FT260 chip implements USB to I2C/UART bridges through two
USB HID class interfaces. The first - for I2C, and the second for UART.
Each interface is independent, and the kernel detects it as a separate
USB hidraw device.
This commit adds I2C host adapter support.
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Tested-by: Aaron Jones (FTDI-UK) <aaron.jones@ftdichip.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some new 2021 version of ASUS gamer laptops are using an updated
N-Key keyboard with the PID of 0x19b6. This version is using the
same init sequence and brightness control as the 0x1866 keyboard.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.
The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.
Fixes: 81bb773fae ("HID: plantronics: Update to map volume up/down controls")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Dinovo Edge and Dinovo Mini keyboards with builtin touchpad come with
a different version of the quad/bt2.0 combo receivers shipped with the
MX5000 and MX5500 keyboards. These receivers are compatible with one
another, e.g. the Dinovo Edge keyboard can be paired with the MX5000
receiver.
Like the MX5x00 receivers in HID proxy mode these receivers present
themselves as a hub with multiple USB-HID devices, one for the keyboard
and one for the mouse.
Where they differ is that the mouse USB-device has 2 input reports for
reporting mice events. It has the exact same INPUT(2) report as the
MX5x00 receivers, but it also has a second INPUT(5) mouse report which
is different; and when the Dinovo receivers are paired with the Dinovo
keyboards the second INPUT(5) mouse report is actually used for events
on the builtin touchpad.
Add support for handling the Dinovo quad/bluetooth-2.0 combo receivers
in HID proxy mode to logitech-dj, like we already do for the similar
MX5000 and MX5500 receivers.
This adds battery monitoring functionality (through logitech-hidpp) and
fixes the Phone (Fn + F1) and "[A]" - "[D]" (Fn + F9 - F12) hotkeys not
working on the Dinovo Edge.
Note these receivers present themselves as a hub with 2 separate USB
devices for the keyboard and mouse; and the logitech-dj code needs to
bind to both devices (just as with the MX5x00 receivers).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The logitech-dj code already uses hid-ids.h defines for almost all devices
it supports. Lets be consistent: add and use hid-ids.h defines for the
G700, MX5000 and MX5500 receivers too.
Also add / update some comments to make the comment style in the
hid_device_id table consistent too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Implement support for PlayStation DualSense gamepad in USB mode.
Support features include buttons and sticks, which adhere to the
Linux gamepad spec.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Battery status is reported for the HP Spectre X360 Convertible 15-df0xxx
even if it does not have a battery. Prevent it to always report the
battery as low.
Signed-off-by: Elia Devito <eliadevito@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The ITE8568 EC on the Voyo Winpad A15 presents itself as an I2C-HID
attached keyboard and mouse (which seems to never send any events).
This needs the I2C_HID_QUIRK_NO_IRQ_AFTER_RESET quirk, otherwise we get
the following errors:
[ 3688.770850] i2c_hid i2c-ITE8568:00: failed to reset device.
[ 3694.915865] i2c_hid i2c-ITE8568:00: failed to reset device.
[ 3701.059717] i2c_hid i2c-ITE8568:00: failed to reset device.
[ 3707.205944] i2c_hid i2c-ITE8568:00: failed to reset device.
[ 3708.227940] i2c_hid i2c-ITE8568:00: can't add hid device: -61
[ 3708.236518] i2c_hid: probe of i2c-ITE8568:00 failed with error -61
Which leads to a significant boot delay.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit adds support for tilt on Standard Guitar Hero PS3 Guitars, and GH3
PC Guitars, mapping it to ABS_RY.
Note that GH3 PC Guitars are identical, only they use different VID and PIDs.
Also note that vendor id 0x12ba is used by a variety of different rhythm
controllers on the ps3.
Signed-off-by: Sanjay Govind <sanjay.govind9@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some Chicony's keyboards support airplane mode hotkey (Fn+F2) with
"Wireless Radio Control" feature. For example, the wireless keyboard
[04f2:1236] shipped with ASUS all-in-one desktop.
After consulting Chicony for this hotkey, learned the device will send
with 0x11 as the report ID and 0x1 as the value when the key is pressed
down.
This patch maps the event as KEY_RFKILL.
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Battery status is being reported for the Elan touchscreen on ASUS
UX550 laptops despite not having a batter. It always shows either 0 or
1%.
Signed-off-by: Seth Miller <miller.seth@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make the hid-ite driver handle the Acer S1002 keyboard-dock, this
leads to 2 improvements:
1. The non working wifi-toggle hotkey now works.
2. Toggling the touchpad on of with the hotkey will no show OSD
notifications in e.g. GNOME3. The actual toggling is handled inside
the keyboard, this adds support for notifying evdev listeners about this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit adds support for the Guitar Hero Live PS3 and Wii U dongles.
These dongles require a "magic" USB control message [1] to be sent
approximately every 10 seconds otherwise the dongle will not report
events where the strumbar is hit while a fret is being held.
Also, inspired by a patch sent on linux-input by Sanjay Govind [2], the
accelerometer is mapped to ABS_RY for tilt.
Interestingly, the Wii U and PS3 dongles share the same VID and PID.
[1] https://github.com/ghlre/GHLtarUtility/
[2] https://marc.info/?l=linux-input&m=157242835928542&w=2
Signed-off-by: Pascal Giard <pascal.giard@etsmtl.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Mayflash/Dragonrise seems to have yet another device ID for one of their
Gamecube controller adapters. Previous to this commit, the adapter
registered only one /dev/input/js* device, and all controller inputs (from
any controller) were mapped to this device. This patch defines the 1846
USB device ID and enables the HID_QUIRK_MULTI_INPUT quirk for it, which
fixes that (with the patch, four /dev/input/js* devices are created, one
for each of the four controller ports).
Signed-off-by: Ethan Warth <redyoshi49q@gmail.com>
Tested-by: Wladimir J. van der Laan <laanwj@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Enables three buttons (Fn1, Fn2, and Fn3) on the ELECOM M-XGL20DLBK
wireless mouse.
While this mouse is EX-G brand, report descriptor is a bit different
from EX-G trackball mouse. To enable extra buttons, report should be
rewritten in a similar way to trackballs, but with different position
parameters.
Signed-off-by: YOSHIOKA Takuma <lo48576@hard-wi.red>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The battery status is also being reported by the logitech-hidpp driver,
so ignore the standard HID battery status to avoid reporting the same
info twice.
Note the logitech-hidpp battery driver provides more info, such as properly
differentiating between charging and discharging. Also the standard HID
battery info seems to be wrong, reporting a capacity of just 26% after
fully charging the device.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Kernel 5.4 introduces HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE, devices need to
be set explicitly with this flag.
Signed-off-by: Chris Ye <lzye@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The ASUS N-Key keyboard uses the productId of 0x1866 and is used in
almost all modern ASUS gaming laptops with slight changes to the
firmware. This patch enables: Fn+key hotkeys, keyboard backlight
brightness control.
Additionally this keyboard requires the LED interface to be
initialized before such things as keyboard backlight control work.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This device needs HID_QUIRK_MULTI_INPUT in order to be presented to userspace
in a consistent way.
Reported-and-tested-by: David Gámiz Jiménez <david.gamiz@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Varmilo VA104M Keyboard (04b4:07b1, reported as Varmilo Z104M)
exposes media control hotkeys as a USB HID consumer control device, but
these keys do not work in the current (5.8-rc1) kernel due to the
incorrect HID report descriptor. Fix the problem by modifying the
internal HID report descriptor.
More specifically, the keyboard report descriptor specifies the
logical boundary as 572~10754 (0x023c ~ 0x2a02) while the usage
boundary is specified as 0~10754 (0x00 ~ 0x2a02). This results in an
incorrect interpretation of input reports, causing inputs to be ignored.
By setting the Logical Minimum to zero, we align the logical boundary
with the Usage ID boundary.
Some notes:
* There seem to be multiple variants of the VA104M keyboard. This
patch specifically targets 04b4:07b1 variant.
* The device works out-of-the-box on Windows platform with the generic
consumer control device driver (hidserv.inf). This suggests that
Windows either ignores the Logical Minimum/Logical Maximum or
interprets the Usage ID assignment differently from the linux
implementation; Maybe there are other devices out there that only
works on Windows due to this problem?
Signed-off-by: Frank Yang <puilp0502@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Trust Flex Design Tablet has an UGTizer USB ID and requires the same
initialization as the UGTizer GP0610 to be detected as a graphics tablet
instead of a mouse.
Signed-off-by: Martijn van de Streek <martijn@zeewinde.xyz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
One more device that needs 40d5bb87 to resolve regression for the trackpoint
and three mouse buttons on the type cover of the Lenovo X1 Tablet Gen2.
Signed-off-by: Mikael Wikström <leakim.wikstrom@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
One more device that needs 40d5bb87 to resolve regression for the trackpoint
and three mouse buttons on the type cover of the Lenovo X1 Tablet Gen3.
It is probably also needed for the Lenovo X1 Tablet Gen2 with PID 0x60a3
Signed-off-by: Mikael Wikström <leakim.wikstrom@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Acer One S1003 2-in-1 keyboard dock uses a Synaptics S910xx touchpad
which is connected to an ITE 8910 USB keyboard controller chip.
This keyboard has the same quirk for its rfkill / airplane mode hotkey as
other keyboards with ITE keyboard chips, it only sends a single release
event when pressed and released, it never sends a press event.
This commit adds this keyboards USB id to the hid-ite id-table, fixing
the rfkill key not working on this keyboard. Note that like for the
Acer Aspire Switch 10 (SW5-012) the id-table entry matches on the
HID_GROUP_GENERIC generic group so that hid-ite only binds to the
keyboard interface and the mouse/touchpad interface is left untouched
so that hid-multitouch can bind to it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When operating in XInput mode, the 8bitdo SN30 Pro+ requires the same
quirk as the official Xbox One Bluetooth controllers for rumble to
function.
Other controllers like the N30 Pro 2, SF30 Pro, SN30 Pro, etc. probably
also need this quirk, but I do not have the hardware to test.
Signed-off-by: Nicholas Miell <nmiell@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Saitek X52 family of joysticks has a pair of axes that were
originally (by the Windows driver) used as mouse pointer controls. The
corresponding usage page is the Game Controls page, which is not
recognized by the generic HID driver, and therefore, both axes get
mapped to ABS_MISC. The quirk makes the second axis get mapped to
ABS_MISC+1, and therefore made available separately.
One Saitek X52 device is already fixed. This patch fixes the other two
known devices with VID/PID 06a3:0255 and 06a3:0762.
Signed-off-by: Nirenjan Krishnan <nirenjan@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. One Lenovo PixArt
mouse is already fixed. Got two references for 17ef:602e and three
references for 17ef:6019 misbehaving like this. Got one direct bug
report for 17ef:6093 from Wyatt Ward (wyatt8740). So add
HID_QUIRK_ALWAYS_POLL for all of them.
Link: https://github.com/sriemer/fix-linux-mouse issue 22
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add HID_QUIRK_NOGET for Logitech GROUP device.
Logitech GROUP is a compound with camera and audio.
When the HID interface in an audio device is requested to get
specific report id, all following control transfers are stalled
and never be restored back.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203419
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some of the function keys special functions all use the same
0x000c0001 usage code, add a mapping for these based on the usage_index;
And add support for the Speaker and Mic mute LEDs integrated into the
F1 and F4 keys.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
As this is a cypress HID->COM RS232 style device that is handled
by the cypress_M8 driver we also need to add it to the ignore list
in hid-quirks.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Obins Anne Pro 2 keyboard (04d9:a293) disconnects after a few
minutes of inactivity when using it wired and typing does not result
in any input events any more. This is a common firmware flaw. So add
the ALWAYS_POLL quirk for this device.
GitHub user Dietrich Moerman (dietrichm) tested the quirk and
requested my help in my project
https://github.com/sriemer/fix-linux-mouse issue 22 to provide
this patch.
Link: https://www.reddit.com/r/AnnePro/comments/gruzcb/anne_pro_2_linux_cant_type_after_inactivity/
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
After commit c23e2043d5 ("HID: multitouch: do not filter mice nodes"),
MT_CLS_WIN_8 also supports mouse nodes, hence make MT_CLS_WIN_8_DUAL
redundant.
Remove MT_CLS_WIN_8_DUAL accordingly.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The multi-touch touchpad found on the Medion Akoya E1239T's keyboard-dock,
uses the same custom multi-touch protocol as the Asus keyboard-docks
(same chipset vendor, Integrated Technology Express / ITE).
Add support for this using the existing multi-touch touchpad support in
the hid-asus driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a HID_QUIRK_NO_INIT_REPORTS quirk for the Dell K12A keyboard-dock,
which can be used with various Dell Venue 11 models.
Without this quirk the keyboard/touchpad combo works fine when connected
at boot, but when hotplugged 9 out of 10 times it will not work properly.
Adding the quirk fixes this.
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On the Dell XPS 9570, the Synaptics SYNA2393 touchpad generates spurious
interrupts after resuming from suspend until it receives some input or
is reset. Add it to the quirk I2C_HID_QUIRK_RESET_ON_RESUME so that it
is reset when resuming from suspend.
More information about the bug can be found in this mailing list
discussion: https://www.spinics.net/lists/linux-input/msg59530.html
Signed-off-by: Daniel Playfair Cal <daniel.playfair.cal@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID_DEVICE_ID_ALPS_1657 PID is too specific, as there are many other
ALPS hardware IDs using this particular touchpad.
Rename the identifier to HID_DEVICE_ID_ALPS_U1_UNICORN_LEGACY in order
to describe reality better.
Fixes: 640e403b1f ("HID: alps: Add AUI1657 device ID")
Reported-by: Xiaojian Cao <xiaojian.cao@cn.alps.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This device is used on Lenovo V130-15IKB variants and uses
the same registers as U1.
Signed-off-by: Artem Borisov <dedsa2002@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Logitech G11 keyboard is a cheap variant of the G15 without the LCD
screen. It uses the same layout for its extra and macro keys (G1 - G18,
M1-M3, MR) and - from the input subsystem's perspective - behaves just
like the G15, so we can treat it as such.
Tested it with my own keyboard.
Signed-off-by: Fabian Schindlatz <fabian.schindlatz@fau.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Glorious Model O mice (and also at least the Model O-, which is
driver-wise the same mouse) have a bug in the descriptor of HID
Report with ID 2. This report is used for Consumer Control buttons,
which can be mapped using the provided Windows only software.
Here is an excerpt from the original descriptor:
INPUT(2)[INPUT]
Field(0)
Flags( Constant Variable Absolute )
Field(1)
Flags( Constant Variable Absolute )
Field(2)
Flags( Constant Variable Absolute )
The issue is the Constant flag specified on all 3 fields, which
causes the hid driver to ignore changes in these fields and
essentialy causes the buttons to not work at all. The submitted driver
patches the descriptor to end up with the following:
INPUT(2)[INPUT]
Field(0)
Flags( Variable Relative )
Field(1)
Flags( Variable Relative )
Field(2)
Flags( Variable Relative )
The Constant bit is reset and the Relative bit has been set in
order to prevent repeat events when holding down the button.
Additionally, the device name is changed from the hardware-reported
"SINOWEALTH Wired Gaming Mouse" to "Glorious Model O" or "Glorious
Model D".
Signed-off-by: Samuel Čavoj <sammko@sammserver.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A lenovo pixart mouse (17ef:608d) is afflicted common the the malfunction
where it disconnects and reconnects every minute--each time incrementing
the device number. This patch adds the device id of the device and
specifies that it needs the HID_QUIRK_ALWAYS_POLL quirk in order to
work properly.
Signed-off-by: Tony Fischetti <tony.fischetti@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
MCP2221 is a USB HID to I2C/SMbus host bridge device. This
commit implements i2c and smbus host adapter support. 7-bit
address and i2c multi-message transaction is also supported.
Signed-off-by: Rishi Gupta <gupt21@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Acer SW5-012 2-in-1 keyboard dock uses a Synaptics S91028 touchpad
which is connected to an ITE 8595 USB keyboard controller chip.
This keyboard has the same quirk for its rfkill / airplane mode hotkey as
other keyboards with the ITE 8595 chip, it only sends a single release
event when pressed and released, it never sends a press event.
This commit adds this keyboards USB id to the hid-ite id-table, fixing
the rfkill key not working on this keyboard.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add multitouch support for LG MELF I2C touchscreen.
Apply the same workaround as LG USB touchscreen.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On some ThinkPad L390 some raydium 3118 touchscreen devices
doesn't response any data after reset, but some does.
Add this ID to no irq quirk,
then don't wait for any response alike on these touchscreens.
All kinds of raydium 3118 devices work fine.
BugLink: https://bugs.launchpad.net/bugs/1849721
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The PixArt OEM mouse disconnets/reconnects every minute on
Linux. All contents of dmesg are repetitive:
[ 1465.810014] usb 1-2.2: USB disconnect, device number 20
[ 1467.431509] usb 1-2.2: new low-speed USB device number 21 using xhci_hcd
[ 1467.654982] usb 1-2.2: New USB device found, idVendor=03f0,idProduct=1f4a, bcdDevice= 1.00
[ 1467.654985] usb 1-2.2: New USB device strings: Mfr=1, Product=2,SerialNumber=0
[ 1467.654987] usb 1-2.2: Product: HP USB Optical Mouse
[ 1467.654988] usb 1-2.2: Manufacturer: PixArt
[ 1467.699722] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:07.1/0000:05:00.3/usb1/1-2/1-2.2/1-2.2:1.0/0003:03F0:1F4A.0012/input/input19
[ 1467.700124] hid-generic 0003:03F0:1F4A.0012: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:05:00.3-2.2/input0
So add HID_QUIRK_ALWAYS_POLL for this one as well.
Test the patch, the mouse is no longer disconnected and there are no
duplicate logs in dmesg.
Reference:
https://github.com/sriemer/fix-linux-mouse
Signed-off-by: Jinke Fan <fanjinke@hygon.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for the gaming and LCD menu keys on the G510 keyboard.
Note this commit does not add support for the keyboard and LCD backlight
and the status LEDs, this is done in a follow up commit.
Note the G510 generates 4 different input reports on its second
(Consumer Keys) interface:
-input report 1 is standard bootclass keyboard input report, mirroring
normal keyboard interface
-input report 2 is consumer page keys
-input report 3 is gkeys, etc.
-input report 4 is LED status, single byte, bits:
bit 2: kbd and LCD backlight is *off* when set, toggled by the light key
bit 3: headphone mute LED
bit 4: mic mute LED
Input-report 1 we ignore since this is a duplicate report from the first
interface, report 2 is handled by the regular hid-input code. In this
commit we add handling for input report 3.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a driver to stop the extra "G" keys from sending F1 - F12 instead
making them send KEY_GKEY# and also make the non-functional M1 - M3 and MR
keys and the non-functional buttons below the LCD panel properly generated
key events.
Note the connect_mask and gkeys_settings_output_report variables may seem
unnecessary since they are always set to the same value, these are there in
preparation of adding support for the G, M and LCD keys on the G510 kbd.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- extension of supported usage range for customer page, as some Logitech
devices are actually making use of it. From Olivier Gay.
- support for Lightspeed and G700(s) receivers from Filipe Laíns and
Benjamin Tissoires
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a new hid driver for the Creative SB0540 IR receiver. This receiver
is usually coupled with an RM-1500 or an RM-1800 remote control.
The scrollwheels on the RM-1800 remote are not bound, as they are
labelled for specific audio controls that don't usually exist on most
systems. They can be remapped using standard Linux keyboard
remapping tools.
Signed-off-by: Bastien Nocera <bnocera@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. So add quirk
ALWAYS_POLL for this one as well.
Ville Viinikka (viinikv) reported and tested the quirk.
Link: https://github.com/sriemer/fix-linux-mouse issue 15
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
CC: stable@vger.kernel.org # v4.16+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This patchs adds the new Lightspeed receiver. Currently it seems to only
be used in the G305.
Signed-off-by: Filipe Laíns <lains@archlinux.org>
[bentiss: rebased on top of master]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. So add quirk
ALWAYS_POLL for this one as well.
Jonathan Teh (@jonathan-teh) reported and tested the quirk.
Reference: https://github.com/sriemer/fix-linux-mouse/issues/15
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Saitek X52 joystick has a pair of axes that are originally
(by the Windows driver) used as mouse pointer controls. The corresponding
usage->hid values are 0x50024 and 0x50026. Thus they are handled
as unknown axes and both get mapped to ABS_MISC. The quirk makes
the second axis to be mapped to ABS_MISC1 and thus made available
separately.
[jkosina@suse.cz: squashed two patches into one]
Signed-off-by: István Váradi <ivaradi@varadiistvan.hu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This should help people identify the receiver. there are several receivers used
in gaming mice. the "lightspeed" technology is pretty well advertise so this
won't just be an obscure name.
Signed-off-by: Filipe Laíns <lains@archlinux.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. So add quirk
ALWAYS_POLL for this Alienware branded Primax mouse as well.
Daniel Schepler (@dschepler) reported and tested the quirk.
Reference: https://github.com/sriemer/fix-linux-mouse/issues/15
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Jiri Kosina:
- fix for one corner case in HID++ protocol with respect to handling
very long reports, from Hans de Goede
- power management fix in Intel-ISH driver, from Hyungwoo Yang
- use-after-free fix in Intel-ISH driver, from Dan Carpenter
- a couple of new device IDs/quirks from Kai-Heng Feng, Kyle Godbey and
Oleksandr Natalenko
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: intel-ish-hid: fix wrong driver_data usage
HID: multitouch: Add pointstick support for ALPS Touchpad
HID: logitech-dj: Fix forwarding of very long HID++ reports
HID: uclogic: Add support for Huion HS64 tablet
HID: chicony: add another quirk for PixArt mouse
HID: intel-ish-hid: Fix a use after free in load_fw_from_host()
There's a new ALPS touchpad/pointstick combo device that requires
MT_CLS_WIN_8_DUAL to make its pointsitck work as a mouse.
The device can be found on HP ZBook 17 G5.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
I've spotted another Chicony PixArt mouse in the wild, which requires
HID_QUIRK_ALWAYS_POLL quirk, otherwise it disconnects each minute.
USB ID of this device is 0x04f2:0x0939.
We've introduced quirks like this for other models before, so lets add
this mouse too.
Link: https://github.com/sriemer/fix-linux-mouse#usb-mouse-disconnectsreconnects-every-minute-on-linux
Signed-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Acked-by: Sebastian Parschauer <s.parschauer@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Jiri Kosina:
- regression fixes (reverts) for module loading changes that turned out
to be incompatible with some userspace, from Benjamin Tissoires
- regression fix for special Logitech unifiying receiver 0xc52f, from
Hans de Goede
- a few device ID additions to logitech driver, from Hans de Goede
- fix for Bluetooth support on 2nd-gen Wacom Intuos Pro, from Jason
Gerecke
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-dj: Fix 064d:c52f receiver support
Revert "HID: core: Call request_module before doing device_add"
Revert "HID: core: Do not call request_module() in async context"
Revert "HID: Increase maximum report size allowed by hid_field_extract()"
HID: a4tech: fix horizontal scrolling
HID: hyperv: Add a module description line
HID: logitech-hidpp: Add support for the S510 remote control
HID: multitouch: handle faulty Elo touch device
HID: wacom: Sync INTUOSP2_BT touch state after each frame if necessary
HID: wacom: Correct button numbering 2nd-gen Intuos Pro over Bluetooth
HID: wacom: Send BTN_TOUCH in response to INTUOSP2_BT eraser contact
HID: wacom: Don't report anything prior to the tool entering range
HID: wacom: Don't set tool type until we're in range
HID: rmi: Use SET_REPORT request on control endpoint for Acer Switch 3 and 5
HID: logitech-hidpp: add support for the MX5500 keyboard
HID: logitech-dj: add support for the Logitech MX5500's Bluetooth Mini-Receiver
HID: i2c-hid: add iBall Aer3 to descriptor override
Add support for Ugee Rainbow CV720 to hid-uclogic.
Signed-off-by: Wang Xuerui <git@xen0n.name>
Reviewed-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The touchpad on the cover keyboard for the Acer Switch 3 and 5 does not
work as-is under Linux. Both devices have the same usb id for the cover
keyboard.
The kernel correctly assigns the hid-rmi driver to the device using usbhid
for transport.
Any attempts of hid-rmi to talk to the device using hid_hw_output_report
fail however as usbhid does not have a working urbout due to the lack of
any out endpoints.
Looking through Wireshark usbmon recordings from the Windows Synaptics
driver for this computer running inside of QEMU shows that it should be
using SET_REPORT requests instead.
This replaces the hid_hw_output_report in hid-rmi with a
hid_hw_raw_request for this device, which is at least enough to enable
the kernel to get working multi-touch input.
Signed-off-by: Tobias Auerochs <tobi291019@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
27 MHz mouse-only receivers send an unnumbered input report with the mouse
data, add special handling for this and add the c51b product-id to the
logi_dj_receivers table.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This receiver is almost identical to the normal unifying ones except:
- it is supposed to be paired to only one device (for performance reasons)
- the mice reports have a greater ranges in their values, so they are
using a different report ID.
Tested on a G403 and a G900.
Co-authored-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
We emulate the DJ functionality through the driver.
The receiver supports "fake device arrival" which behaves
like the probing of DJ devices.
A non-unifying receiver has 2 USB interfaces, the first one generates
standard keypresses and is compatible with the USB Keyboard Boot Subclass.
The second interface sends events for the mouse and special keys such as
the consumer-page keys. Events are split this way for BIOS / Windows /
generic-hid driver compatibility. This split does not actually match with
which device the event originate from, e.g. the consumer-page key events
originate from the keyboard but are delivered on the mouse interface.
To make sure the events are actually delivered to the dj_device
representing the originating device, we pick which dj_dev to forward
a "regular" input-report to based on the report-number, rather
then based on the originating interface.
Co-authored-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This reverts commit 74e7c6c877.
It finally turns out the touchpad is an engineering sample and it is
not the Synaptics touchpad. Let us revert this patch otherwise it will
affect the real Synaptics touchpad.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
U2F Zero supports custom commands for blinking the LED and getting data
from the internal hardware RNG. Expose the blinking function as a LED
device, and the internal hardware RNG as an HWRNG so that it can be used
to feed the enthropy pool.
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This enables the power and equals keys on the Macally ikey keyboard.
Based on the Cougar gaming keyboard HID driver, which uses the same
vendor ID.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
We have a new Dell laptop which has the synaptics I2C touchpad
(06cb:7e7e) on it. After booting up the Linux, the touchpad doesn't
work, there is no interrupt when touching the touchpad, after
disable the runtime PM, everything works well.
I also tried the quirk of I2C_HID_QUIRK_DELAY_AFTER_SLEEP, it is
better after applied this quirk, there are interrupts but data it
reports is invalid.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for Ugee G5 to hid-uclogic.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Add support for XP-Pen Deco 01 to hid-uclogic.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Add support for XP-Pen Star G640 to hid-uclogic.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Add support for XP-Pen Star G540 to hid-uclogic.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Add support for Ugee 2150 to hid-uclogic.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Add "_UCLOGIC" to Ugee tablet device ID macros so it's clear they come
with UC-Logic vendor ID.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Add support for ViewSonic PD1011 signature (display) pad, which is also
sold by Signotec under a different name.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Originally contributed by Andrey Alekseenko <al42and@gmail.com>.
Signed-off-by: Andrey Alekseenko <al42and@gmail.com>
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The Logitech WingMan Formula GP by default presents a combined
accelerate/brake axis, so this patch assigns it to hid-logitech in order to
benefit from the axis-splitting logic in lg4ff. There is also a fixed
report descriptor for the resulting report.
Signed-off-by: Jarrad Whitaker <jarrad.whitaker@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for the trackpoint and three mouse buttons on the type cover
of the Lenovo X1 Tablet Gen3.
This is the same as with the 2nd generation Lenovo X1 Tablet.
Signed-off-by: Mikael Wikström <leakim.wikstrom@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The bluetooth-keyboard which comes with the Toshiba WT10A tablet uses
a couple of usage codes in the vendor specific ffbc page.
The keyboard has a vendor-id of 04f2 which maps to Chicony.
Other then adding a few keymappings for the ffbc usages, no special
handling is necessary. So rather then adding a new hid-toshiba driver,
this commit adds the ID and 2 extra key-mappings to the hid-topseed
driver. The hid-topseed driver already contains mapping for some
ffbc usages (and does nothing else) and it already binds to another
Chicony manufactured keyboard.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The USB report descriptor sent by the Maltron L90 keyboard is invalid,
causing the media key reports not to be accepted.
This patch adds a driver which uses a report fixup to replace the
descriptor.
Signed-off-by: William Whistler <wtbw@wtbw.co.uk>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
A Goodix touchpad doesn't work. Touching the touchpad can trigger IRQ
but there's no input event from HID subsystem.
Turns out it reports some invalid data:
[ 22.136630] i2c_hid i2c-DELL091F:00: input: 0b 00 01 00 00 00 00 00 00 00 00
After some trial and error, it's another device that doesn't work well
with ON/SLEEP commands. Disable runtime PM to fix the issue.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The ASUS T101HA keyboard dock generates HID events using the ASUS vendor
specific UsagePage 0xff31. In consequence, some multimedia keys such as
brightness up and down are not working with hid-generic.
This commit adds the T101HA dock into the supported device list of the
hid-asus driver. It also prevents the dock's integrated touchpad to be
bound with hid-asus given that it is already working fine with
hid-multitouch.
Signed-off-by: Aleix Roca Nonell <kernelrocks@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
SNES RetroPort and RetroPad register only 4 gamepad buttons
when they should register all 8 buttons. This is described here:
https://ask.fedoraproject.org/en/question/128102
This is happening because of:
Commit 190d7f02ce ("HID: input: do not increment usages when
duplicate is found")
Here, I add the quirk HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE
(created for backward compatibility with the change in 190d7f02ce)
for the two products.
Tested with both RetroPort and RetroPad.
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Nic Soudée <nsoudee@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The ASUS FX503VD laptop uses an USB keyboard with several hotkeys
which use the Asus Vendor specific UsagePage.
This uses two usage-codes within the page which have not been seen
before, 0x7c for its mic-mute hotkey and 0x99 for Fn+F5 which has
a "fan" symbol as hotkey symbol on the keyb. we map this to KEY_PROG4
(PROG1-PROG3 are already used).
This commit adds the mappings for the 2 new usage codes and the USB-ids
for this keyboard to the hid-asus driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The 258a:6a88 keyboard-dock shipped with the Prowise PT301 tablet is
likely another ITE based design. The controller die is directly bonded
to the PCB with a blob of black glue on top so there are no markings and
the 258a vendor-id used is unknown anywhere. But the keyboard has the
exact same hotkeys mapped to Fn+F1 - F10 as the other ITE8595 keyboard
I have *and* it has the same quirky behavior wrt the rfkill hotkey.
Either way as said this keyboard has the same quirk for its rfkill /
airplane mode hotkey as the ITE 8595 chip, it only sends a single release
event when pressed and released, it never sends a press event.
This commit adds the 258a:6a88 USB id to the hid-ite id-table, fixing
the rfkill key not working on this keyboard.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Add USB ID 060b:700a to the list of valid USB IDS for the
cougar hid driver.
Signed-off-by: Daniel M. Lambea <dmlambea@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. So add quirk
ALWAYS_POLL for two Primax mice as well.
0x4e22 is the Dell MS111-P and 0x4d0f is the unbranded HP Portia
mouse HP 697738-001. Both were built until approx. 2014.
Those were the standard mice from those vendors and are still
around - even as new old stock.
Reference: https://github.com/sriemer/fix-linux-mouse/issues/11
Signed-off-by: Sebastian Parschauer <sparschauer@suse.de>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
LG touchscreen (1fd2:8001) stops working after reboot:
[ 4.859153] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66)
[ 4.936070] i2c_hid i2c-SAPS2101:00: i2c_hid_get_input: incomplete report (64/66)
[ 9.948224] i2c_hid i2c-SAPS2101:00: failed to reset device.
The device in question stops working after receives SLEEP, ON, SLEEP
commands in a short period. The scenario is like this:
- Once the desktop session closes, it also closed the hid device, so the
device gets runtime suspended and receives a SLEEP command.
- Before calling shutdown callback, it gets runtime resumed and received
an ON command.
- In the shutdown callback, it receives another SLEEP command.
I failed to find a reliable interval between ON/SLEEP commands that can
make it work, so let's simply disable runtime PM for the device.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cirque Touchpad/Pointstick combo is similar to Alps devices, it requires
MT_CLS_WIN_8_DUAL to expose its pointstick as a mouse.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Motorola/Zebra Symbol DS4308-HD is a handheld USB barcode scanner
which does not have a battery, but reports one anyway that always has
capacity 2.
Let's apply the IGNORE quirk to prevent it from being treated like a
power supply so that userspaces don't get confused that this
accessory is almost out of power and warn the user that they need to charge
their wired barcode scanner.
Reported here: https://bugs.chromium.org/p/chromium/issues/detail?id=804720
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Raydium touchpanel (2386:4B33) sometimes does not work in desktop session
although it works in display manager.
During user logging, the display manager exits, close the HID device,
then the device gets runtime suspended and powered off. The desktop
session begins shortly after, opens the HID device, then the device gets
runtime resumed and powered on.
If the trasition from display manager to desktop sesesion is fast, the
touchpanel cannot switch from powered off to powered on in short
timeframe. So add a small delay to workaround the issue.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Redragon Seymur 2 stops working since commit 190d7f02ce ("HID: input:
do not increment usages when a duplicate is found").
Use quirk HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE suggested by the commit
can solve the issue.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200995
BugLink: https://bugs.launchpad.net/bugs/1793846
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
USB device
Vendor 05ac (Apple)
Device 0265 (Magic Trackpad 2)
Bluetooth device
Vendor 004c (Apple)
Device 0265 (Magic Trackpad 2)
Add support for Apple Magic Trackpad 2 over USB and bluetooth, putting
the device in multi-touch mode.
Signed-off-by: Claudio Mettler <claudio@ponyfleisch.ch>
Signed-off-by: Marek Wyborski <marek.wyborski@emwesoft.com>
Signed-off-by: Sean O'Brien <seobrien@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This is a driver to fix input mapping and add LED & force feedback
support for the "BigBen Interactive Kid-friendly Wired Controller
PS3OFMINIPAD SONY" gamepad with USB id 146b:0902. It was originally
sold as a PS3 accessory and makes a very nice gamepad for Retropie.
Signed-off-by: Hanno Zulla <kontakt@hanno.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit 52cf93e63e ("HID: i2c-hid: Don't reset device upon system resume")
removes the need for the RESEND_REPORT_DESCR quirk for Raydium devices, but
kept it for the SIS device id 10FB touchscreens, as the author of that
commit could not determine if the quirk is still necessary there.
I've tested suspend/resume on a Toshiba Click Mini L9W-B which is the
device for which this quirk was added in the first place and with the
"Don't reset device upon system resume" fix the quirk is no longer
necessary, so this commit removes it.
Note even better I also had some other devices with SIS touchscreens which
suspend/resume issues, where the RESEND_REPORT_DESCR quirk did not help.
I've also tested these devices with the "Don't reset device upon system
resume" fix and I'm happy to report that that fix also fixes touchscreen
resume on the following devices:
Asus T100HA
Asus T200TA
Peaq C1010
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Raydium touchscreen triggers interrupt storm after system-wide suspend:
[ 179.085033] i2c_hid i2c-CUST0000:00: i2c_hid_get_input: incomplete report (58/65535)
According to Raydium, Windows driver does not reset the device after system
resume.
The HID over I2C spec does specify a reset should be used at intialization, but
it doesn't specify if reset is required for system suspend.
Tested this patch on other i2c-hid touchpanels I have and those touchpanels do
work after S3 without doing reset. If any regression happens to other
touchpanel vendors, we can use quirk for Raydium devices.
There's still one device uses I2C_HID_QUIRK_RESEND_REPORT_DESCR so keep it
there.
Cc: Aaron Ma <aaron.ma@canonical.com>
Cc: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add HID quirk driver for Xbox One S controller over bluetooth.
This driver only adds support for rumble. Standard controller
functionality is exposed by default HID driver.
[jkosina@suse.cz: straightforward rebase on more recent driver code]
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Signed-off-by: Juha Kuikka <juha.kuikka@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
USB device
Vendor 05ac (Apple)
Device 026c (Magic Keyboard with Numeric Keypad)
Bluetooth devices
Vendor 004c (Apple)
Device 0267 (Magic Keyboard)
Device 026c (Magic Keyboard with Numeric Keypad)
Support already exists for the Magic Keyboard over USB connection.
Add support for the Magic Keyboard over Bluetooth connection, and for
the Magic Keyboard with Numeric Keypad over Bluetooth and USB
connection.
Signed-off-by: Sean O'Brien <seobrien@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cougar 500k Gaming Keyboard have some special function keys that
make the keyboard stop responding once pressed. Implement the custom
vendor interface that deals with the extended keypresses to fix.
The bug can be reproduced by plugging in the keyboard, then pressing the
rightmost part of the spacebar.
Signed-off-by: Daniel M. Lambea <dmlambea@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Toshiba Click Mini L9W keyboard dock has a single i2c-hid Elan device
for both the keyboard and the touchpad. Add support for the touchpad to
the hid-elan driver, rather then relying on mouse emulation.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Now that we query all the parameters, adding support for new hardware
is easy. This commit adds support for the touchpad found on the
HP x2 10-n000nd touchpad 2-in-1.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Another device in the hammer class, with USB id 0x5030.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There are two ways to connect the Steam Controller: directly to the USB
or with the USB wireless adapter. Both methods are similar, but the
wireless adapter can connect up to 4 devices at the same time.
The wired device will appear as 3 interfaces: a virtual mouse, a virtual
keyboard and a custom HID device.
The wireless device will appear as 5 interfaces: a virtual keyboard and
4 custom HID devices, that will remain silent until a device is actually
connected.
The custom HID device has a report descriptor with all vendor specific
usages, so the hid-generic is not very useful. In a PC/SteamBox Valve
Steam Client provices a software translation by using hidraw and a
creates a uinput virtual gamepad and XTest keyboard/mouse.
This driver intercepts the hidraw usage, so it can get out of the way
when the Steam Client is in use.
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The 0457:10fb touchscreen found on the Toshiba Click Mini L9W-B needs
to have a report-decriptors command send to it on resume in order for
the touchscreen to start generating events again on resume.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The IBM/Lenovo Scrollpoint mice feature a trackpoint-like stick instead of a
scrolling wheel capable of 2-D (vertical+horizontal) scrolling. hid-generic
does only expose 1-D (vertical) scrolling functionality for these mice. This
patch adds support for horizontal scrolling for the IBM/Lenovo Scrollpoint mice
to hid-lenovo.
[jkosina@suse.cz: remove change versioning from git changelog]
Signed-off-by: Peter Ganzhorn <peter.ganzhorn@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Peter De Wachter <pdewacht@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This adds a new driver for the Redragon Asura keyboard. The Asura
keyboard contains an error in the HID descriptor which causes all
modifier keys to be mapped to left shift. Additionally, we suppress
the creation of a second, not working, keyboard device.
Signed-off-by: Robert Munteanu <rombert@apache.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When Rayd touchscreen resumed from S3, it issues too many errors like:
i2c_hid i2c-RAYD0001:00: i2c_hid_get_input: incomplete report (58/5442)
And all the report data are corrupted, touchscreen is unresponsive.
Fix this by re-sending report description command after resume.
Add device ID as a quirk.
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID updates from Jiri Kosina:
- 3rd generation Wacom Intuos BT device support from Aaron Armstrong
Skomra
- support for NSG-MR5U and NSG-MR7U devices from Todd Kelner
- multitouch Razer Blade Stealth support from Benjamin Tissoires
- Elantech touchpad support from Alexandrov Stansilav
- a few other scattered-around fixes and cleanups to drivers and
generic code
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (31 commits)
HID: google: Enable PM Full On mode when adjusting backlight
HID: google: add google hammer HID driver
HID: core: reset the quirks before calling probe again
HID: multitouch: do not set HID_QUIRK_NO_INIT_REPORTS
HID: core: remove the need for HID_QUIRK_NO_EMPTY_INPUT
HID: use BIT() macro for quirks too
HID: use BIT macro instead of plain integers for flags
HID: multitouch: remove dead zones of Razer Blade Stealth
HID: multitouch: export a quirk for the button handling of touchpads
HID: usbhid: extend the polling interval configuration to keyboards
HID: ntrig: document sysfs interface
HID: wacom: wacom_wac_collection() is local to wacom_wac.c
HID: wacom: generic: add the "Report Valid" usage
HID: wacom: generic: Support multiple tools per report
HID: wacom: Add support for 3rd generation Intuos BT
HID: core: rewrite the hid-generic automatic unbind
HID: sony: Add touchpad support for NSG-MR5U and NSG-MR7U remotes
HID: hid-multitouch: Use true and false for boolean values
HID: hid-ntrig: use true and false for boolean values
HID: logitech-hidpp: document sysfs interface
...
Add Google hammer HID driver. This driver allow us to control hammer
keyboard backlight and support future features.
Signed-off-by: Wei-Ning Huang <wnhuang@google.com>
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Sony's NSG-MR5U and NSG-MR7U remote controls have a full keyboard and a
touchpad. The keyboard is already supported by the existing Linux
kernel and drivers but the touchpad is not recognized. This patch adds
the coded needed to bring full functionality to the touchpad.
Note that these remotes use the vendor code for SMK even though they are
Sony branded.
Known limitations
- The built-in accelerometers are not supported by these changes
- When the Drag (Fn) key is used as a mouse button, the button is
automatically released when the key begins repeating. There are two
workarounds for this 1) Use the button behind the touchpad instead of
the Drag (Fn) key or 2) Disable the key repeat functionality or
increase the key repeat delay.
Signed-off-by: Todd Kelner <tsopdump@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch enables the 6th button on the ELECOM EX-G M-XT4DRBK
trackball mouse.
This is a left handed EX-G variant which only comes in a wireless (D)
model. It has a total of 6 buttons but one of these is not available
because of how the HID descriptor is configured.
Signed-off-by: Tomasz Kramkowski <tk@the-tk.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch changes all references to ELECOM trackballs using their
series name to refer to them by their model name.
ELECOM provides multiple series of mice such as EX-G, HUGE, and DEFT.
Although it has not caused conflicts in the driver, there can be more
than one iteration of mice in each series. For example, there are 7
variants of EX-G trackballs but only three (M-XT3URBK, M-XT3DRBK, and
M-XT4DRBK) need a driver to work correctly.
There are also 4 DEFT series trackballs but two of them have the same
VID:PID as the other two. I picked the earlier model for the naming of
the PID macros.
Signed-off-by: Tomasz Kramkowski <tk@the-tk.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This mouse sold by Corsair as the GLAIVE RGB gaming mouse has the same
problem with its HID reports as the Scimitar PRO RGB, so reuse the
same fix for the GLAIVE RGB.
Signed-off-by: Guus Sliepen <guus@sliepen.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This is driver for usb touchpad found on HP Pavilion x2 10-p0xx laptop. On this
device keyboard and touchpad connected as a single usb device with two
interfaces: keyboard, which exposes ordinary keys and second interface is
touchpad which also contains FlightMode button and audio mute led (which
physically placed on keyboard for some reason).
Initially, this touchpad works in mouse emulation mode, this driver will switch
it to touchpad mode, which can track 5 fingers and can report coordinates for
two of them.
Signed-off-by: Alexandrov Stansilav <neko@nya.ai>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for new CASSY devices to the ldusb driver. The
PIDs are also added to the ignore list in hid-quirks.
Signed-off-by: Karsten Koop <kkoop@ld-didactic.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch rewrites the mouse report fixup used for the DEFT and HUGE
elecom trackballs in order to make it generic enough to fix other
elecom mice with similar issues. This patch also uses this new report
fixup function to fix the Elecom EX-G trackball which has 6 physical
buttons and a similar issue to the other two mice.
Elecom's track record has so far shown that they like to re-use the
same report descriptor for multiple different mice regardless of the
number of buttons the mouse has. This means that the missing buttons
on multiple mice can be fixed in one function without introducing
phantom buttons which would in turn cause the number of mouse buttons
to be misreported to userspace.
This patch drops the very verbose report descriptor "diff" comment for
a more abridged yet hopefully just as informative generic version.
Signed-off-by: Tomasz Kramkowski <tk@the-tk.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Fujitsu R726 Pad has an optional USB keyboard dock which contains
a Synaptics touchpad. The dock identifies itself as a
Primax Rezel Tablet Keyboard.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This mouse keep disconnecting in runleve 3 like below, add it needs the
quirk to mute the anoying messages.
[ 111.230555] usb 2-2: USB disconnect, device number 6
[ 112.718156] usb 2-2: new low-speed USB device number 7 using xhci_hcd
[ 112.941594] usb 2-2: New USB device found, idVendor=03f0, idProduct=094a
[ 112.984866] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 113.027731] usb 2-2: Product: HP USB Optical Mouse
[ 113.069977] usb 2-2: Manufacturer: PixArt
[ 113.113500] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:03F0:094A.0002/input/input14
[ 113.156787] hid-generic 0003:03F0:094A.0002: input: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.0-2/input0
[ 173.262642] usb 2-2: USB disconnect, device number 7
[ 174.750244] usb 2-2: new low-speed USB device number 8 using xhci_hcd
[ 174.935740] usb 2-2: New USB device found, idVendor=03f0, idProduct=094a
[ 174.990435] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 175.014984] usb 2-2: Product: HP USB Optical Mouse
[ 175.037886] usb 2-2: Manufacturer: PixArt
[ 175.061794] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:03F0:094A.0003/input/input15
[ 175.084946] hid-generic 0003:03F0:094A.0003: input: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.0-2/input0
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The T100TAF and T100HA keyboard docks have the same special keys and
custom protocol multitouch touchpad as the T100TA, but use a different
product id.
The T100TAF and T100HA both use the same product id, but the T100HA's
touchpad has a different coordinate range.
This commits adds supports for the new USB id and uses a dmi-check to
determine if we're dealing with the T100TAF or T100HA.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197849
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- cp2112: GPIO error handling and Kconfig fixes from Sébastien Szymanski
- i2c-hid: fixup / quirk for Apollo-Lake based laptops, from Hans de Goede
- Input/Core: add eraser tool support, from Ping Cheng
- small assorted code fixes
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Several cheap Apollo Lake based laptops / 2-in-1s use an i2c-hid mt
touchpad which is advertised by the DSDT with an ACPI HID of "SYNA3602",
this touchpad can be found on e.g. the Cube Thinker and the EZBook 3 Pro.
On my "T-bao Tbook air" the i2c-hid driver fails to bind to this touchpad:
"i2c_hid i2c-SYNA3602:00: failed to reset device.".
After some debuging this it seems that this touchpad simply never sends
an interrupt after a reset as expected by the i2c hid driver. This commit
adds a quirk for this device, making i2c_hid_command sleep 100ms after
a reset instead of waiting for an irq, fixing i2c-hid failing to bind to
this touchpad.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The GamepadBlock game controller adapter needs HID_QUIRK_MULTI_INPUT
to split it up into two input devices. Without this quirk the
adapter is falsely recognized as only one device and mixes up the
inputs of the two connected controllers.
Signed-off-by: Florian Mueller <contact@petrockblock.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add new U1 device Product ID This device is used on HP Elite book x360 series.
[jkosina@suse.cz: update changelog]
Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- Define T4 device specification value for support T4 device.
- Creeate "t4_contact_data" and "t4_input_report" structure for decoding and
storing T4-specific data
- Create "t4_calc_check_sum()" function for calculating checksum value to send
to the device. T4 needs to send this value when reading or writing device
address value.
- Create "t4_read_write_register()" function for reading and writing device
address value.
- Create "t4_raw_event()" function for decodin XYZ, palm and button data.
- Replace "MAX_TOUCHES" fixed variable to "max_fingers" variable.
- Add T4 devuce product ID. (0x120C)
T4 device is used on HP EliteBook 1000 series and Zbook Stduio
[jkosina@suse.cz: rewrite changelog]
Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In addition to DEFT, Elecom introduced a larger trackball called HUGE, in
both wired (M-HT1URBK) and wireless (M-HT1DRBK) versions. It has the same
buttons and behavior as the DEFT. This patch adds the two relevant USB IDs
to enable operation of the three Fn buttons on the top of the device.
Cc: Diego Elio Petteno <flameeyes@flameeyes.eu>
Signed-off-by: Alex Manoussakis <amanou@gnu.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit fcaa4a07d2.
As noted by Masaki [1], 0x120A + trackpoint will not be used in mass
production machines, so remove the ID accordingly.
[1] http://www.spinics.net/lists/linux-input/msg53222.html
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for Fn keys on Asus ROG G752 laptop.
The report descriptor is broken so I fixed it.
Tested on an Asus G752VT.
Resent fix white space fixes
Signed-off-by: Maxime Bellengé <maxime.bellenge@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds ALPS PTP sticks with pid/device id 0x120A to the list of
devices supported by hid-multitouch.
Signed-off-by: Shrirang Bagul <shrirang.bagul@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On the 2nd generation Lenovo Tablet only clickpad is working; the
trackpoint and three mouse buttons do not work.
hid_multitouch must export all inputs in order to get trackpoint and
buttons to function.
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Ideacom 6680 touchscreen is found in the Dell Latitude 2100. It
has two USB descriptors, the first of which has two input reports. The
HID_QUIRK_MULTI_INPUT quirk is needed to keep the correct maximum
value for ABS_X/ABS_Y (8191 instead of 65535).
Signed-off-by: Nicholas Bishop <nbishop@neverware.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- support for media keys on Asus T304UA from João Paulo Rechi Vita
- support for Microsoft Win8 Wireless Radio Controls extensions
from João Paulo Rechi Vita
Conflicts:
drivers/hid/hid-ids.h
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Asus T304UA convertible sports a magnetic detachable keyboard with
touchpad, which is connected over USB. Most of the keyboard hotkeys are
exposed through the same USB interface as the touchpad, defined in the
report descriptor as follows:
0x06, 0x31, 0xFF, // Usage Page (Vendor Defined 0xFF31)
0x09, 0x76, // Usage (0x76)
0xA1, 0x01, // Collection (Application)
0x05, 0xFF, // Usage Page (Reserved 0xFF)
0x85, 0x5A, // Report ID (90)
0x19, 0x00, // Usage Minimum (0x00)
0x2A, 0xFF, 0x00, // Usage Maximum (0xFF)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x0F, // Report Count (15)
0xB1, 0x02, // Feature (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile)
0x05, 0xFF, // Usage Page (Reserved 0xFF)
0x85, 0x5A, // Report ID (90)
0x19, 0x00, // Usage Minimum (0x00)
0x2A, 0xFF, 0x00, // Usage Maximum (0xFF)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x02, // Report Count (2)
0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position)
0xC0, // End Collection
This UsagePage is declared as a variable, but we need to treat it as an
array to be able to map each Usage we care about to its corresponding
input key.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Without a quirk or the X Window System, this device disconnects every
60 seconds. This patch also renames the define associated with the
Logitech 0xc007 product ID, which appeared to have a conflicting typo.
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Kyle Roarty <kroarty@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The iHome keypad also requires the same tweak we are doing for other
Ortek devices.
Reported-by: Mairin Duffy <duffy@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Asus Transformer T100CHI comes with a Bluetooth keyboard dock which
uses the same 0xff31 Asus vendor HUT page as other Asus keyboards.
This commit adds its device-id to hid-asus and fixes an issue in the
descriptor of the 0xff31 Usage, which together fixes the special keys
on this keyboard not working.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This driver does 2 things:
- Apply the MULTI_INPUT quirk to create separate joypad device nodes
for each one of the 4 connectors.
- Rename the input devices so that their names are different, and allow
users to recognise which device corresponds to which physical port,
including the SNES (Mario Paint) Mouse.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add Google Rose Touchpad USB PID and required quirks.
Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Support PTP Stick and Touchpad device. This Touchpad is Precision Touchpad
(PTP), and Stick Pointer data is the same as Mouse; Stick Pointer works as
Mouse.
[jkosina@suse.cz: changelog deuglification]
Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for media keys on the MD-5110 wireless keyboard that comes
with the Asus V221ID and ZN241IC All In One computers.
The keys to support here are WLAN, BRIGHTNESSDOWN and BRIGHTNESSUP.
The USB Vendor ID suggests that it is a TURBOX device, but
the physical branding only mentions ASUS MD-5110.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Acked-by: Benjamin Tissoires <benajmin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Asus AIO keyboard AK1D was added to hid-chicony based on its
USB vendor ID, however images available online suggest that this keyboard
is physically branded as ASUS with no mention of Chicony.
A recent commit also added support for another Asus AIO keyboard into
hid-chicony, this one with USB vendor ID Jess, and a pending review
comment asked me to move it into hid-asus because it is also only
physically branded as ASUS.
I updated the USB ID defines to match the branding and product name,
including noting that the recently added keyboard is labelled as
ASUS MD-5112.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Acked-by: Benjamin Tissoires <benajmin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This mouse is also known under other IDs. It needs the quirk
ALWAYS_POLL or will disconnect in runlevel 1 or 3.
Signed-off-by: Sebastian Parschauer <sparschauer@suse.de>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The keyboard dock used with the Asus Transformer T100 series, uses
the same vendor-defined 0xff31 usage-page as some other Asus
keyboards. But with a small twist, it has a small descriptor bug which
needs to be fixed up for things to work.
This commit adds the USB-ID for this keyboard to the hid-asus driver
and makes asus_report_fixup fix the descriptor issue, fixing
various special function keys on this keyboard not working.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The ELECOM DEFT trackballs report only five buttons, when the device
actually has 8. Change the descriptor so that the HID driver can see all of
them.
For completeness and future reference, I included a side-by-side diff of
the part of the descriptor that is being edited.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Yuxuan Shui <yshuiv7@gmail.com>
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
