Limit GT max frequency to 2600MHz and wait for frequency to reduce
before proceeding with a transient flush. This is really only needed for
the transient flush: if L2 flush is needed due to 16023588340 then
there's no need to do this additional wait since we are already using
the bigger hammer.
v2: Use generic names, ensure user set max frequency requests wait
for flush to complete (Rodrigo)
v3:
- User requests wait via wait_var_event_timeout (Lucas)
- Close races on flush + user requests (Lucas)
- Fix xe_guc_pc_remove_flush_freq_limit() being called on last gt
rather than root gt (Lucas)
v4:
- Only apply the freq reducing part if a TDF is needed: L2 flush trumps
the need for waiting a lower frequency
Fixes: aaa08078e7 ("drm/xe/bmg: Apply Wa_22019338487")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://lore.kernel.org/r/20250618-wa-22019338487-v5-4-b888388477f2@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit deea6a7d6d)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Define PMU events for GT frequency (actual and requested). The
instantaneous values for these frequencies will be displayed.
Following PMU events are being added:
xe_0000_00_02.0/gt-actual-frequency/ [Kernel PMU event]
xe_0000_00_02.0/gt-requested-frequency/ [Kernel PMU event]
Standard perf commands can be used to monitor GT frequency:
$ perf stat -e xe_0000_00_02.0/gt-requested-frequency,gt=0/ -I1000
1.001229762 1483 Mhz xe_0000_00_02.0/gt-requested-frequency,gt=0/
2.006175406 1483 Mhz xe_0000_00_02.0/gt-requested-frequency,gt=0/
v2: Use locks while storing/reading samples, keep track of multiple
clients (Lucas) and other general cleanup.
v3: Review comments (Lucas) and use event counts instead of mask for
active events.
v4: Add freq events to event_param_valid method (Riana)
v5: Use instantaneous values instead of aggregating (Lucas)
v6: Obtain fwake at init for freq events as well and use non fwake
variant method for reading requested freq to avoid lockdep issues (Lucas)
v7: Review comments (Rodrigo, Lucas)
Cc: Riana Tauro <riana.tauro@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250331204827.2535393-1-vinay.belgaumkar@intel.com
Allows the visualization of the current GuC power conservation
status and policies.
v2: Fix DCC msg (Vinay)
v3: Simplify pc_get_state_string (Jonathan)
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115145053.1142023-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
RPa is the Achievable frequency, defined by PCODE at runtime
based on multiple running conditions.
v2: Remove RPA_MASK from i915 file
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220152936.623627-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We already request max freq in the load path, moving it
to __xe_guc_upload will ensure this speeds up GuC load in
the resume path as well.
v2: Rename xe_guc_pc_init_early since we now call it per
GuC load (Michal W)
v3: Keep pc_init_early() and init RPx values there (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620224928.3986377-3-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This WA requires us to limit media GT frequency requests to a certain
cap value during driver load. Freq limits are restored after load
completes, so perf will not be affected during normal operations.
During normal driver operation, this WA requires dummy writes to media
offset 0x380D8C after every ~63 GGTT writes. This will ensure completion
of the LMEM writes originating from Gunit.
During driver unload(before FLR), the WA requires that we set requested
frequency to the cap value again.
v3: Do not use WA number in function name. Call WA wrapper from xe_device.
Rename some variables, check for locks in the correct function (Rodrigo).
Ensure reset path is also covered for this WA.
v4: Fix BAT failure
v5: Add a function pointer for ggtt_ops (Michal W)
v6: Fix name collision and use static function (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620224928.3986377-2-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On PVC, a w/a resets RCS/CCS before it goes into RC6. This breaks OA since
OA does not expect engine resets during its use. Fix it by disabling RC6.
v2: Convert to gt oriented error/warn messages (Michal)
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618014609.3233427-16-ashutosh.dixit@intel.com
SLPC is not used at "hwconfig" stage. Move the initialization of data
structures used for SLPC to a later point in probe.
Also - move the xe_guc_pc_init_early to happen just prior to initial
"hwconfig" load.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219130530.1406044-3-michal.winiarski@intel.com
Goals of this new xe_gt_freq component:
1. Detach sysfs controls and raw freq management from GuC SLPC.
2. Create a directory that could later be aligned with devfreq.
3. Encapsulate all the freq control in a single directory. Although
we only have one freq domain per GT, already start with a numbered
freq0 directory so it could be expanded in the future if multiple
domains or PLL are needed.
Note: Although in the goal #1, the raw freq management control is
mentioned, this patch only starts by the sysfs control. The RP freq
configuration and init freq selection are still under the guc_pc, but
should be moved to this component in a follow-up patch.
v2: - Add /tile# to the doc and remove unnecessary kobject_put (Riana)
- s/ssize_t/int on some ret variables (Vinay)
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Starting GT freq is usually RPn. Raising freq to RP0 will
help speed up GuC load times. As an example, this data was
collected on DG2-
GuC Load time @RPn ~ 41 ms
GuC Load time @RP0 ~ 11 ms
v2: Raise GT freq before hwconfig init. This will speed up
both HuC and GuC loads. Address review comments (Rodrigo).
Also add a small usleep after requesting frequency which gives
pcode some time to react.
v3: Address checkpatch issue
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On PVC unloading followed by reloading the module often results in a
completely dead machine (seems to be plaguing CI). Resetting the GuC
like we do at load seems to cure it at least when locally testing this.
v2:
- Move pc_fini into guc_fini. We want to do the GuC reset just after
calling pc_fini, otherwise we encounter communication failures. It
also seems like a good idea to do the reset before we start releasing
the various other GuC resources. In the case of pc_fini there is an
explicit stop, but for other stuff like logs, ads, ctb there is not.
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/542
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/597
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently GuCRC is disabled in suspend path for xe.
Rc6 is a prerequiste to enable s0ix and
should not be disabled for s2idle. There is no requirement
to disable GuCRC for S3+.
Remove it from xe_guc_pc_stop, thus removing from suspend path.
Retain the call in other places where xe_guc_pc_stop is
called.
v2: add description and return statement to kernel-doc (Rodrigo)
v3: update commit message (Rodrigo)
v4: add mem_access_get to the gucrc disable function
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add the registers to get C6 residency of MTL SAMedia and
C6 status of MTL gts
v2:
- move register definitions to regs header (Anshuman)
- correct reg definition for mtl rc status
- make idle_status function common (Badal)
v3:
- remove extra line in commit message
- use only media type check in initialization
- use graphics ver check (Anshuman)
v4:
- remove extra lines (Anshuman)
Bspec: 66300
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
1) Add a new sysfs directory under devices/gt#/ called gtidle
to contain idle properties of GT such as name, idle_status,
idle_residency_ms
2) Remove forcewake calls for residency counter
v2:
- abstract using function pointers (Anshuman)
- remove forcewake calls for residency counter
- use device_attr (Badal)
- move rc functions to guc_pc
- change name to gt_idle (Rodrigo)
v3:
- return error for drmm_add_action_or_reset
- replace file and functions with gt_idle prefix
to gt_idle_sysfs (Himal)
- use enum for gt idle state
- move multiplier to gt idle and initialize (Anshuman)
- correct doc annotation (Rodrigo)
- remove return variable
- use kobj_gt instead of new gtidle kobj
- move residency_ms to gtidle file
- retain xe_guc_pc prefix for functions in guc_rc file (Michal)
v4:
- fix doc errors in xe_guc_pc file
- change u64 to u32 for reading residency counter
- keep gtidle states generic GT_IDLE_C[0/6] (Anshuman)
v5:
- update commit message to include removal of
forcewake calls (Anshuman)
- return void from sysfs initialization function and add warnings
(Andi)
v6:
- remove extra lines (Anshuman)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms starting with Tiger Lake (first Intel Xe Architecture).
The code is at a stage where it is already functional and has experimental
support for multiple platforms starting from Tiger Lake, with initial
support implemented in Mesa (for Iris and Anv, our OpenGL and Vulkan
drivers), as well as in NEO (for OpenCL and Level0).
The new Xe driver leverages a lot from i915.
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there. But it is not added
in this patch.
This initial work is a collaboration of many people and unfortunately
the big squashed patch won't fully honor the proper credits. But let's
get some git quick stats so we can at least try to preserve some of the
credits:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Co-developed-by: Francois Dugast <francois.dugast@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Philippe Lecluse <philippe.lecluse@intel.com>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: José Roberto de Souza <jose.souza@intel.com>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Co-developed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Co-developed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
