Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
By default HDMI codec registers all formats supported on the I2S bus.
Allow bridges (and connectors) to limit the list of the PCM formats
supported by the HDMI codec.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-2-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
This is the new API for allocating DRM bridges.
This driver already implements refcounting of the struct vc4_dsi, which
embeds struct drm_bridge. Now this is a duplicate of the refcounting
implemented by the DRM bridge core, so convert the vc4_dsi_get/put() calls
into drm_bridge_get/put() calls and get rid of the driver-specific
refcounting implementation.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250424-drm-bridge-convert-to-alloc-api-v2-27-8f91a404d86b@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Backmerging to get v6.15-rc1 into drm-misc-next. Also fixes a
build issue when enabling CONFIG_DRM_SCHED_KUNIT_TEST.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Some functions used by the HVS->PV muxing tests can return with EDEADLK,
meaning the entire sequence should be restarted. It's not a fatal error
and we should treat it as a recoverable error, and recover, instead of
failing the test like we currently do.
Fixes: 76ec18dc5a ("drm/vc4: tests: Add unit test suite for the PV muxing")
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20250403-drm-vc4-kunit-failures-v2-4-e09195cc8840@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The vc4-pv-muxing-combinations and vc5-pv-muxing-combinations test
suites use a common test init function which, in part, allocates the
drm atomic state the test will use.
That allocation relies on drm_kunit_helper_atomic_state_alloc(), and
thus requires a struct drm_modeset_acquire_ctx. This context will then
be stored in the allocated state->acquire_ctx field.
However, the context is local to the test init function, and is cleared
as soon as drm_kunit_helper_atomic_state_alloc() is done. We thus end up
with an dangling pointer to a cleared context in state->acquire_ctx for
our test to consumes.
We should really allocate the context and the state in the test
functions, so we can also control when we're done with it.
Fixes: 30188df0c3 ("drm/tests: Drop drm_kunit_helper_acquire_ctx_alloc()")
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20250403-drm-vc4-kunit-failures-v2-3-e09195cc8840@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
vc4_mock_atomic_add_output() and vc4_mock_atomic_del_output() are public
but aren't documented. Let's provide the documentation.
In particular, special care should be taken to deal with EDEADLK.
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20250403-drm-vc4-kunit-failures-v2-2-e09195cc8840@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The vc4_mock_atomic_add_output() and vc4_mock_atomic_del_output() assert
that the functions they are calling didn't fail. Since some of them can
return EDEADLK, we can't properly deal with it.
Since both functions are expected to return an int, and all caller check
the return value, let's just properly propagate the errors when they
occur.
Fixes: f759f5b53f ("drm/vc4: tests: Introduce a mocking infrastructure")
Fixes: 76ec18dc5a ("drm/vc4: tests: Add unit test suite for the PV muxing")
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20250403-drm-vc4-kunit-failures-v2-1-e09195cc8840@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add ALSA jack detection to the vc4-hdmi audio driver so userspace knows
when to add/remove HDMI audio devices.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: David Turner <david.turner@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250317-vc4_hotplug-v4-3-2af625629186@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
drm_atomic_helper_connector_hdmi_hotplug() must be called
regardless of the connection status, otherwise the HDMI audio
disconnect event won't be notified.
Fixes: 2ea9ec5d2c ("drm/vc4: hdmi: use drm_atomic_helper_connector_hdmi_hotplug()")
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: David Turner <david.turner@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250317-vc4_hotplug-v4-2-2af625629186@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
The drm_bridge structure contains an encoder pointer that is widely used
by bridge drivers. This pattern is largely documented as deprecated in
other KMS entities for atomic drivers.
However, one of the main use of that pointer is done in attach to just
call drm_bridge_attach on the next bridge to add it to the bridge list.
While this dereferences the bridge->encoder pointer, it's effectively
the same encoder the bridge was being attached to.
We can make it more explicit by adding the encoder the bridge is
attached to to the list of attach parameters. This also removes the need
to dereference bridge->encoder in most drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-1-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
lockdep complains when a lock is released in a separate thread the
lock is taken in, and it turns out that kunit does run its actions in a
separate thread than the test ran in.
This means that drm_kunit_helper_acquire_ctx_alloc() just cannot work as
it's supposed to, so let's just get rid of it.
Suggested-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220132537.2834168-1-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Replace platform_get_resource_byname + devm_ioremap_resource
with just devm_platform_ioremap_resource()
Used Coccinelle to do this change. SmPl patch:
//rule s/(devm_)platform_get_resource_byname +
//(devm_)ioremap/devm_platform_ioremap_resource.
@rule_3@
identifier res;
expression ioremap;
identifier pdev;
constant mem;
expression name;
@@
-struct resource *res;
<+...
-res = platform_get_resource_byname(pdev,mem,name);
<...
-if (!res) {
-...
-}
...>
-ioremap = devm_ioremap(...);
+ioremap = devm_platform_ioremap_resource_byname(pdev,name);
...+>
v2: Change the SmPl patch to work on multiple occurences of
the pattern. This also fixes the compilation error.
v3: Do not convert "hd" resource to follow the rest of the
refactor. (Maxime)
v4: fix compiler error
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Link: https://lore.kernel.org/r/20250225-memory-drm-misc-next-v1-11-9d0e8761107a@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_post_disable hook prototype to
pass it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-5-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_disable hook prototype to pass
it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-4-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_enable hook prototype to pass it
directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-3-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_pre_enable hook prototype to
pass it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-2-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Currently, DRM atomic uAPI allows only primary planes to be flipped
asynchronously. However, each driver might be able to perform async
flips in other different plane types. To enable drivers to set their own
restrictions on which type of plane they can or cannot flip, use the
existing atomic_async_check() from struct drm_plane_helper_funcs to
enhance this flexibility, thus allowing different plane types to be able
to do async flips as well.
Create a new parameter for the atomic_async_check(), `bool flip`. This
parameter is used to distinguish when this function is being called from
a plane update from a full page flip.
In order to prevent regressions and such, we keep the current policy: we
skip the driver check for the primary plane, because it is always
allowed to do async flips on it.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Christopher Snowhill <chris@kode54.net>
Tested-by: Christopher Snowhill <chris@kode54.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20250127-tonyk-async_flip-v12-1-0f7f8a8610d3@igalia.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The current code uses a the reset_pipe() local function to reset the
CRTC outputs.
drm_atomic_helper_reset_crtc() has been introduced recently and it
performs exact same operations.
In order to avoid code duplication, use the new helper instead of the
local function.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210132620.42263-4-herve.codina@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
`bo->seqno`, `bo->write_seqno`, and `exec->bin_dep_seqno` are leftovers
from a time when VC4 didn't support DMA Reservation Objects. Before DMA
Resv was introduced, tracking the correspondence between BOs and jobs
through the job's seqno made sense.
However, this is no longer needed, as VC4 now supports DMA Reservation
Objects and attaches the "job done" fence to the BOs. Therefore, remove
the BOs seqnos in favor of using DMA Resv Objects.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220134204.634577-4-mcanal@igalia.com
Since the BOs used by VC4 have DMA Reservation Objects attached to
them, waiting for seqnos to check BO availability is unnecessary.
Instead, `drm_gem_dma_resv_wait()` can be used.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220134204.634577-3-mcanal@igalia.com
VC4 has internal copies of `drm_gem_lock_reservations()` and
`drm_gem_unlock_reservations()` within the driver. Ideally, these
hard-coded functions should be replaced with the generic functions
provided by DRM common code. However, instead of using the DRM GEM
functions to (un)lock reservations, transition to the new DRM Execution
Contexts API.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220134204.634577-2-mcanal@igalia.com
The mode_valid() callbacks of drm_encoder, drm_crtc and drm_bridge
take a const struct drm_display_mode argument. Change the mode_valid
callback of drm_connector to also take a const argument.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-5-4f9498a4c822@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Use the helper function to update the connector's information. This
makes sure that HDMI-related events are handled in a generic way.
Currently it is limited to the HDMI state reporting to the sound system.
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-10-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The vc4_hdmi_connector_detect_ctx() via vc4_hdmi_handle_hotplug()
already reads EDID and propagates it to the drm_connector. Stop
rereading EDID as a part of the .get_modes() callback and just update
the list of modes. This matches the behaviour of the i915 driver.
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-9-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The default statement is never used in real life. However, if it were
used for some reason then call drm_dev_exit() before returning.
Fixes: 8f2fc64773 ("drm/vc4: Fix reading of frame count on GEN5 / Pi4")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b61a81b2-0101-43bd-a4f6-09cf3a016484@stanley.mountain
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
It is permitted on situations such as system resume for plane->state
to be non-NULL, and that should be handled by freeing it. Do so.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241202120343.33726-1-wahrenst@gmx.net
The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.
Backmerge in order to fix them before the next pull-request.
Include the fix from Stephen Roswell.
Caused by commit
25c3fd1183 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")
Interacting with commit
cdd30ebb1b ("module: Convert symbol namespace to string literal")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
We stopped using the driver initialized date in commit 7fb8af6798
("drm: deprecate driver date") and (eventually) started returning "0"
for drm_version ioctl instead.
Finish the job, and remove the unused date member from struct
drm_driver, its initialization from drivers, along with the common
DRIVER_DATE macros.
v2: Also update drivers/accel (kernel test robot)
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1f2bf2543aed270a06f6c707fd6ed1b78bf16712.1733322525.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is permitted for a plane to be configured such that none
of it is on-screen via either negative dest rectangle X,Y
offset, or an offset that is greater than the crtc dimensions.
These planes were resized via drm_atomic_helper_check_plane_state
such that the source rectangle had a zero width or height, but
they still created a dlist entry even though they contributed
no pixels. In the case of vc6_plane_mode_set, that it could result
in negative values being written into registers, which caused
incorrect behaviour.
Drop planes that result in a source width or height of 0 pixels
or an on-screen size of 0 pixels to avoid the incorrect rendering.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025-drm-vc4-2712-support-v2-28-35efa83c8fc0@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
The default was to have enable_bg_fill disabled and the first
plane set it if it wasn't opaque and covering the whole screen.
However that meant that if no planes were enabled, then the
background fill wasn't enabled, and would give a striped
output from the uninitialised output buffer.
Initialise it to enabled to avoid this.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025-drm-vc4-2712-support-v2-27-35efa83c8fc0@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
