Return -ENOMEM if udl_alloc_urb_list() fails. Don't return success.
Fixes: fb10144ba4 ("drm/udl: Support adapters without firmware descriptor")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/Z_-P4N4_U-xTC9-O@stanley.mountain
Set default limit on the number of pixels for adapters without
vendor firmware descriptor. The devices work as expected, they
just don't provide any description.
If parsing the vendor firmware descriptor fails, the device falls
back to the given default limits. Failing to allocate memory is
still an error.
v2:
- fix typo in constant (Patrik)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-10-tzimmermann@suse.de
Rewrite the parser for the vendor firmware descriptor with the
following improvements.
- Validate the key-value length given in a vendor descriptor
against the length of the descriptor. The current code fails
to do this and might read more bytes than available. This can
lead to out-of-bounds reads of the allocated buffer.
- Read raw data with helpers for unaligned data. This allows
the code to run on platforms that do now support unaligned memory
access by default.
- Validate the pixel limit against a default value. The default
comes from real-world devices. If the reported number of pixels
is significantly above the limit, it is likely invalid.
- Drop the obsolete print macros. There is still a warning about
invalid firmware descriptors. The rest of the output is bogus.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-9-tzimmermann@suse.de
The vendor descriptor is an array of unsigned bytes. It is raw data
that is not to be modified. Declare it as 'const u8'.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-8-tzimmermann@suse.de
There need to be least 5 bytes in the vendor descriptor. Return
an error otherwise. Also change the branching to early-out on
the error. Adjust indention of the rest of the parser function.
The original length test expected more than 5 bytes in the vendor
descriptor. As a descriptor with no key-value pairs has exactly 5
bytes and is still valid, change the test to accept this case as
well.
v2
- clarify changes to length test in commit description (Patrik)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-7-tzimmermann@suse.de
Reading the vendor descriptor from the udl device can fail with
an error, which the current code fails to capture. Store the return
value in an integer and test for the error. Abort parsing on errors
or treat the value as length on success.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-6-tzimmermann@suse.de
Store sku_pixel_limit as type unsigned long instead of int. The
number of pixels available is always positive.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-5-tzimmermann@suse.de
Push upcasts from struct drm_device to struct udl_device outwards
in the call chain; cast earlier and call functions with the upcasted
value. Improves type safety.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-4-tzimmermann@suse.de
Disconnecting a DisplayLink device results in the following kernel
error messages
[ 93.041748] [drm:udl_urb_completion [udl]] *ERROR* udl_urb_completion - nonzero write bulk status received: -115
[ 93.055299] [drm:udl_submit_urb [udl]] *ERROR* usb_submit_urb error fffffffe
[ 93.065363] [drm:udl_urb_completion [udl]] *ERROR* udl_urb_completion - nonzero write bulk status received: -115
[ 93.078207] [drm:udl_submit_urb [udl]] *ERROR* usb_submit_urb error fffffffe
coming from KMS poll helpers. Shutting down poll helpers runs them
one final time when the USB device is already gone.
Run drm_dev_unplug() first in udl's USB disconnect handler. Udl's
polling code already handles disconnects gracefully if the device has
been marked as unplugged.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b1a981bd55 ("drm/udl: drop drm_driver.release hook")
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303145604.62962-2-tzimmermann@suse.de
We stopped using the driver initialized date in commit 7fb8af6798
("drm: deprecate driver date") and (eventually) started returning "0"
for drm_version ioctl instead.
Finish the job, and remove the unused date member from struct
drm_driver, its initialization from drivers, along with the common
DRIVER_DATE macros.
v2: Also update drivers/accel (kernel test robot)
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # msm
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1f2bf2543aed270a06f6c707fd6ed1b78bf16712.1733322525.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Call drm_client_setup() to run the kernel's default client setup
for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.
v5:
- select DRM_CLIENT_SELECTION
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-61-tzimmermann@suse.de
On x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/gud/gud.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/drm_panel_orientation_quirks.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/drm_mipi_dbi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/i915/kvmgt.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/udl/udl.o
Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE().
For consistency this includes drivers/gpu/drm/drm_simple_kms_helper.c
since it contains a MODULE_LICENSE() even though it isn't built as a
separate module -- it is always built as part of drm_kms_helper and
drm_kms_helper_common.c already provides a MODULE_DESCRIPTION for that
module.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240609-md-drivers-gpu-drm-v1-1-89e9a316d513@quicinc.com
Udl's struct udl_connector is an empty wrapper around struct
drm_connector. Remove it. Allocate the connector as part of struct
udl_device and inline the init function into its only caller.
v2:
- fix return value in udl_modeset_init() (Dan)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510154841.11370-6-tzimmermann@suse.de
Provide separate implementations of .get_modes() and .detect_ctx()
from struct drm_connector. Switch to struct drm_edid.
Udl's .detect() helper used to fetch the EDID from the adapter and the
.get_modes() helper provided display modes from the data. But this
relied on the DRM helpers to call the functions in the correct order.
When no EDID could be retrieved, .detect() regularly printed a warning
to the kernel log.
Switching to the new helpers around struct drm_edid separates both from
each other. The .get_modes() helper now fetches the EDID by itself and
the .detect_ctx() helper only tests for its presence. The patch does a
number of things to implement this.
- Move udl_get_edid_block() to udl_edid.c and rename it to
udl_read_edid_block(). Then use the helper to implement probing in
udl_probe_edid() and reading in udl_edid_read(). The latter helper
is build on top of DRM helpers.
- Replace the existing code in .get_modes() and .detect() with udl's
new EDID helpers. The new code behaves like DRM's similar DDC-based
helpers. Instead of .detect(), udl now implements .detect_ctx().
- Remove the edid data from struct udl_connector. The field cached
the EDID data between calls to .detect() and .get_modes(), but is now
unused.
v3:
- implement udl_probe_edid() with memchr_inv() (Jani)
v2:
- implement udl_probe_edid() within udl
- reword commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510154841.11370-5-tzimmermann@suse.de
Protect the code in udl_get_edid_block() with drm_dev_enter() and
drm_dev_exit(), so that all callers automatically invoke it. The
function uses hardware resources, which can be hot-unplugged at
any time. The other code in udl_connector_detect() does not use the
resources of the hardware device and therefore does not require
protection.
This change will allow to use udl_get_edid_block() in various
contexts easily.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510154841.11370-3-tzimmermann@suse.de
DisplayLink devices do not generate hotplug events. Remove the poll
flag DRM_CONNECTOR_POLL_HPD, as it may not be specified together with
DRM_CONNECTOR_POLL_CONNECT or DRM_CONNECTOR_POLL_DISCONNECT.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: afdfc4c6f5 ("drm/udl: Fixed problem with UDL adpater reconnection")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Cc: Robert Tarasov <tutankhamen@chromium.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.15+
Link: https://patchwork.freedesktop.org/patch/msgid/20240510154841.11370-2-tzimmermann@suse.de
Implement fbdev emulation with fbdev-shmem. Avoids the overhead of
fbdev-generic's additional shadow buffering. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-19-tzimmermann@suse.de
The udl driver is the only caller of drm_plane_helper_atomic_check().
Move the function into the driver. No functional changes.
v2:
* fix documenation (Sui)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204090852.1650-2-tzimmermann@suse.de
The "unode" pointer cannot be NULL here and checking for it causes
Smatch warnings:
drivers/gpu/drm/udl/udl_main.c:259 udl_get_urb_locked()
warn: can 'unode' even be NULL?
Fortunately, it's just harmless dead code which can be removed. It's
left over from commit c5c354a3a4 ("drm/udl: Fix inconsistent urbs.count
value during udl_free_urb_list()").
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/e0e35421-8746-43b6-971e-e25d1cd1d6a7@kili.mountain
Several source files include drm_crtc_helper.h without needing it or
only to get its transitive include statements; leading to unnecessary
compile-time dependencies.
Directly include required headers and drop drm_crtc_helper.h where
possible.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116131235.18917-21-tzimmermann@suse.de
Move the generic fbdev implementation into its own source and header
file. Adapt drivers. No functional changes, but some of the internal
helpers have been renamed to fit into the drm_fbdev_ naming scheme.
v3:
* rename drm_fbdev.{c,h} to drm_fbdev_generic.{c,h}
* rebase onto vmwgfx changes
* rebase onto xlnx changes
* fix include statements in amdgpu
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103151446.2638-22-tzimmermann@suse.de
Rename the atomic helper function drm_atomic_helper_check_crtc_state()
to drm_atomic_helper_check_crtc_primary_plane() and only check for an
attached primary plane. Adapt callers.
Instead of having one big function to check for various CRTC state
conditions, we rather want smaller functions that drivers can pick
individually.
v5:
* rebase on top of udl changes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221007124338.24152-3-tzimmermann@suse.de
Add register constants for the framebuffer scanout addresses and
update the related helper functions. No functional changes.
v2:
* extract address bytes with helper macros (Javier)
* fix comments
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-16-tzimmermann@suse.de
Use a damage iterator to process damage areas individually. Merging
damage areas can result in large updates of unchanged framebuffer
regions. As USB is rather slow, it's better to process damage areas
individually and hence minimize USB-transfered data.
As part of the change, move drm_gem_fb_{begin,end}_cpu_access() into
the plane's atomic_update helper. To avoid overhead and intermediate
writers, we want to synchronize buffers and reserve access only once
before copying damage areas of the framebuffer.
v2:
* clarify commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-11-tzimmermann@suse.de
Add drm_dev_enter() and drm_dev_exit() to the various modesetting
functions that interact with the device. After hot-unplugging the
device, these functions will return early. So far, the udl driver
relied on USB interfaces to handle unplugging of the device.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-10-tzimmermann@suse.de
Inline a modesetting helper in the CRTC's enable function. Build the
command set directly in the USB URB's buffer and drop an intermediate
buffer. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-9-tzimmermann@suse.de
Replace simple-KMS helpers with regular atomic-modesetting helpers.
The simple-KMS helpers introduce a mid-layer abstraction without
added functionality. Using regular atomic helpers makes the driver's
implementation more discoverable and simplifies code sharing.
The conversion effectively open-codes the simple-KMS functions and
data structure within udl. No functional changes.
v2:
* don't use the atomic_disable plane helper
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-8-tzimmermann@suse.de
Add style fixes, better error handling and reporting, and minor
clean-up changes to the connector code before moving the code to
the rest of the modesetting pipeline.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-5-tzimmermann@suse.de
Set the USB control-message timeout to the USB default of 5 seconds.
Done for consistency with other uses of usb_control_msg() in udl and
other drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-4-tzimmermann@suse.de
The sku_pixel_limit is a per-device property, similar to the amount
of available video memory. Move the respective mode-valid test from
the connector to the mode-config structure.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-3-tzimmermann@suse.de
It's better to perform the sync at the very last of the suspend
instead of the pipe-disable function, so that we can catch all pending
URBs (if any).
While we're at it, drop the error code from udl_sync_pending_urb()
since we basically ignore it; instead, give a clear error message
indicating a problem.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-13-tiwai@suse.de
udl_alloc_urb_list() retires the allocation if there is no enough room
left, and it reinitializes the stuff unnecessarily such as the linked
list head and the waitqueue, which could be harmful. Those should be
outside the retry loop.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-12-tiwai@suse.de
