Fix failures on big-endian architectures on tests cases
single_pixel_source_buffer, single_pixel_clip_rectangle,
well_known_colors and destination_pitch.
Fixes: 15bda1f8de ("drm/tests: Add calls to drm_fb_blit() on supported format conversion tests")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250630090054.353246-2-jose.exposito89@gmail.com
When compiling with sparse enabled, this warning is thrown:
warning: incorrect type in argument 2 (different base types)
expected restricted __le32 const [usertype] *buf
got unsigned int [usertype] *[assigned] buf
Add a cast to fix it.
Fixes: 4531143196 ("drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_xrgb2101010()")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250630090054.353246-1-jose.exposito89@gmail.com
Some of our EDIDs are (rightfully) invalid, but most of them should be
valid.
Let's add the edid-decode --check of these EDIDs when they were
generated, so we know what to expect going forward, and a comment to
explicitly mention when we expect them to be broken.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250625-drm-update-edid-v1-3-2d963743ab9e@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
For some reason, the HDMI VSDBs in our kunit EDIDs had a length longer
than expected.
While this was harmless, we should get rid of it to make it somewhat
predictable.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250625-drm-update-edid-v1-2-2d963743ab9e@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
For some reason, some EDIDs used by kunit had Monitor Range Limits
making no sense, and not matching the edid-decode output in the comment.
While they were in the comments as:
Display Range Limits:
Monitor ranges (GTF): 50-70 Hz V, 30-70 kHz H, max dotclock 150 MHz
They were actually:
Display Range Limits:
Monitor ranges (GTF): 50-70 Hz V, 0-0 kHz H, max dotclock 1960 MHz
Fix that section of the EDIDs to match the expected edid-decode output.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250625-drm-update-edid-v1-1-2d963743ab9e@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Move big-endian support from drm_fb_xrgb8888_to_rgb565() into the new
helper drm_xrgb8888_to_rgb565be(). The functionality is required for
displays with big-endian byte order. Update all callers.
With the change applied, drm_fb_xrgb8888_to_rgb565() has the same
signature as the other conversion functions, which is required for
further updates to drm_fb_blit(). Also makes the format-conversion
helper available to panic handlers, if necessary.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250625114911.1121301-1-tzimmermann@suse.de
Only sysfb drivers use drm_fb_build_fourcc_list(). Move the function
to sysfb helpers and rename it accordingly. Update drivers and tests.
v3:
- update naming in tests
v2:
- select DRM_SYSFB_HELPER (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250616083846.221396-4-tzimmermann@suse.de
Only sysfb drivers use drm_fb_build_fourcc_list(). The helper will
be moved from format helpers to sysfb helpers. Moving the related
tests to their own test suite.
v3:
- rename tests according to filename (José)
v2:
- rename filename to match tested code (Maxime)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250616083846.221396-3-tzimmermann@suse.de
Export additional helpers from the format-helper library and open-code
drm_fb_blit() in tests. Prepares for the removal of drm_fb_blit(). Only
sysfb drivers use drm_fb_blit(). The function will soon be removed from
format helpers and be refactored within sysfb helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250616083846.221396-2-tzimmermann@suse.de
Fix the compile-time warnings
drivers/gpu/drm/drm_atomic.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_atomic_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_atomic_state_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_atomic_uapi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_auth.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_buddy.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_color_mgmt.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_connector.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_damage_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_debugfs_crc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_drv.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_edid.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_exec.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fb_dma_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_file.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_flip_work.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_format_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gpusvm.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gpuvm.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_managed.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_mipi_dbi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_mipi_dsi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_mode_config.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_modeset_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_modeset_lock.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_panic.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_plane.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_plane_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_print.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_privacy_screen.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_self_refresh_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_simple_kms_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_suballoc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_syncobj.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_vblank_work.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_vma_manager.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_writeback.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/lib/drm_random.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/tests/drm_kunit_helpers.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: a934a57a42 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612121633.229222-3-tzimmermann@suse.de
Commit a979a54165 ("drm/format-helper: Normalize BT.601 factors
to 256") improved rounding precision of the BT.601 calculation, which
impacts the results of soem of the format-helper tests. Adapt the test
to the new results.
v2:
- fix spelling in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: a979a54165 ("drm/format-helper: Normalize BT.601 factors to 256")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250613111711.136993-1-tzimmermann@suse.de
Use the new DRM bridge allocation API, which is the only supported now, for
the kunit tests.
This change is more massive than for the typical DRM bridge driver because
struct drm_bridge_init_priv currently embeds a struct drm_bridge, which is
not supported anymore. We now have to use devm_drm_bridge_alloc() to
dynamically allocate a "private driver struct", which is a bit awkward here
because there is no real bridge driver. Thus let's add a "dummy" DRM bridge
struct to represent it.
As a nice cleanup we can now move the enable_count and disable_count
members, which are counting bridge-specific events, into the new "private
driver struct" (and avoid adding new unnecessary indirections).
Also add a trivial bridge_to_dummy_bridge() function just like many drivers
do.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20250606-drm-bridge-alloc-doc-test-v9-1-b5bf7b43ed92@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Provide test to verify a mandatory fallback to YUV420 output cannot
succeed when driver doesn't advertise YUV420 support.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-19-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Provide tests to verify drm_atomic_helper_connector_hdmi_check() helper
fallback behavior when using YUV420 output format.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-18-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Create a test EDID advertising the following capabilities:
Max resolution: 3840x2160@30Hz with RGB, YUV444, YUV422, YUV420
Max BPC: 16 for all modes
Max TMDS clock: 340 MHz
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-17-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
In preparation to extend the max TMDS rate fallback tests for covering
YUV420 output, update the rather generic function names
drm_test_check_max_tmds_rate_{bpc|format}_fallback() to properly
indicate the intended test cases.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-16-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Provide tests to verify that drm_atomic_helper_connector_hdmi_check()
helper behaviour when using YUV420 output format is to always set the
limited RGB quantization range to 'limited', no matter what the value of
Broadcast RGB property is.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-15-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Create a test EDID advertising the following capabilities:
Max resolution:
- 1920x1080@60Hz with RGB, YUV444, YUV422
- 3840x2160@30Hz with YUV420 only
Max BPC: 16 for all modes
Max TMDS clock: 200 MHz
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-14-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Replace the calls to drm_atomic_get_connector_state() with
drm_atomic_get_new_connector_state() for cases which do not require
allocating the connector state, e.g. after drm_atomic_check_only() when
the intent is to only read the new connector state.
The rational is to avoid the need to handle the potential EDEADLK error
returned by the former helper, which would require restarting the entire
atomic sequence.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-13-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Initializing HDMI connector via drmm_connector_hdmi_init() requires its
->ycbcr_420_allowed flag to be adjusted according to the supported
formats passed as function argument, prior to the actual invocation.
In order to allow providing test coverage for YUV420 modes, ensure the
flag is properly setup.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-12-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
After updating the code to make use of the new EDID setup helper,
drm_kunit_helper_connector_hdmi_init_funcs() became unused, hence drop
it.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-11-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Make use of the recently introduced macros to reduce boilerplate code
around EDID setup. This also helps dropping the redundant calls to
set_connector_edid().
No functional changes intended.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-10-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Factor out the HDMI connector initialization from
drm_kunit_helper_connector_hdmi_init_funcs() into a common
__connector_hdmi_init() function, while extending its functionality to
allow setting custom (i.e. non-default) EDID data.
Introduce a macro as a wrapper over the new helper to allow dropping the
open coded EDID setup from all test cases.
The actual conversion will be handled separately; for now just apply it
to drm_kunit_helper_connector_hdmi_init() helper.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-9-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Replace 'const char *' with 'const void *' type for current_edid member
in struct drm_atomic_helper_connector_hdmi_priv, as well as for the edid
parameter of set_connector_edid() function.
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-8-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Improve consistency throughout drm_hdmi_state_helper_test.c by replacing
the two occurrences of '[_]MHz' substring with 'mhz'.
As a bonus, this also helps getting rid of checkpatch.pl complaint:
CHECK: Avoid CamelCase: <reject_100_MHz_connector_hdmi_funcs>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-7-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgX1CgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGxiIH/A7LHlVatGEQgRFi
0JALDgcuGTMtMU1qD43rv8Z1GXqTpCAlaBt9D1C9cUH/86MGyBTVRWgVy0wkaU2U
8QSfFWQIbrdaIzelHtzmAv5IDtb+KrcX1iYGLcMb6ZYaWkv8/CMzMX1nkgxEr1QT
37Xo3/F17yJumAdNQxdRhVLGy2d3X5rScecpufwh97sMwoddllMCDs2LIoeSAYpG
376/wzni09G2fADa8MEKqcaMue4qcf0FOo/gOkT8YwFGSZLKa6uumlBLg04QoCt0
foK2vfcci1q4H4ZbCu3uQESYGLQHY0f2ICDCwC3m25VF9a81TmlbC3MLum3vhmKe
RtLDcXg=
=xyaI
-----END PGP SIGNATURE-----
BackMerge tag 'v6.15-rc5' into drm-next
Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The drm_gem_shmem_test_get_pages_sgt() gets a scatter-gather table using
the drm_gem_shmem_get_sg_table() function and rightfully calls
sg_free_table() on it. However, it's also supposed to kfree() the
returned sg_table, but doesn't.
This leads to a memory leak, reported by kmemleak. Fix it by adding a
kunit action to kfree the sgt when the test ends.
Reported-by: Philipp Stanner <phasta@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/
Fixes: 93032ae634 ("drm/test: add a test suite for GEM objects backed by shmem")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250408140758.1831333-1-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm-misc-next for v6.16-rc1:
UAPI Changes:
- Add ASAHI uapi header!
- Add apple fourcc modifiers.
- Add capset virtio definitions to UAPI.
- Extend EXPORT_SYNC_FILE for timeline syncobjs.
Cross-subsystem Changes:
- Adjust DMA-BUF sg handling to not cache map on attach.
- Update drm/ci, hlcdc, virtio, maintainers.
- Update fbdev todo.
- Allow setting dma-device for dma-buf import.
- Export efi_mem_desc_lookup to make efidrm build as a module.
Core Changes:
- Update drm scheduler docs.
- Use the correct resv object in TTM delayed destroy.
- Fix compiler warning with panic qr code, and other small fixes.
- drm/ci updates.
- Add debugfs file for listing all bridges.
- Small fixes to drm/client, ttm tests.
- Add documentation to display/hdmi.
- Add kunit tests for bridges.
- Dont fail managed device probing if connector polling fails.
- Create Kconfig.debug for drm core.
- Add tests for the drm scheduler.
- Add and use new access helpers for DPCPD.
- Add generic and optimized conversions for format-helper.
- Begin refcounting panel for improving lifetime handling.
- Unify simpledrm and ofdrm sysfb, and add extra features.
- Split hdmi audio in bridge to make DP audio work.
Driver Changes:
- Convert drivers to use devm_platform_ioremap_resource().
- Assorted small fixes to imx/legacy-bridg, gma500, pl111, nouveau, vc4,
vmwgfx, ast, mxsfb, xlnx, accel/qaic, v3d, bridge/imx8qxp-ldb, ofdrm,
bridge/fsl-ldb, udl, bridge/ti-sn65dsi86, bridge/anx7625, cirrus-qemu,
bridge/cdns-dsi, panel/sharp, panel/himax, bridge/sil902x, renesas,
imagination, various panels.
- Allow attaching more display to vkms.
- Add Powertip PH128800T004-ZZA01 panel.
- Add rotation quirk for ZOTAC panel.
- Convert bridge/tc358775 to atomic.
- Remove deprecated panel calls from synaptics, novatek, samsung panels.
- Refactor shmem helper page pinning and accel drivers using it.
- Add dmabuf support to accel/amdxdna.
- Use 4k page table format for panfrost/mediatek.
- Add common powerup/down dp link helper and use it.
- Assorted compiler warning fixes.
- Support dma-buf import for renesas
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# include/drm/drm_kunit_helpers.h
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/e147ff95-697b-4067-9e2e-7cbd424e162a@linux.intel.com
A number of test suites call functions that expect the returned
drm_display_mode to be destroyed eventually.
However, none of the tests called drm_mode_destroy, which results in a
memory leak.
Since drm_mode_destroy takes two pointers as argument, we can't use a
kunit wrapper. Let's just create a helper every test suite can use.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-1-996305a2e75a@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Use refcount_t helper for vmap_use_count to make refcounting consistent
with pages_use_count and pages_pin_count that use refcount_t. This also
makes vmapping to benefit from the refcount_t's overflow checks.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.d>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250322212608.40511-11-dmitry.osipenko@collabora.com
Use atomic refcount_t helper for pages_use_count to optimize pin/unpin
functions by skipping reservation locking while GEM's pin refcount > 1.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.d>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250322212608.40511-9-dmitry.osipenko@collabora.com
Add locked and remove unlocked postfixes from drm-shmem function names,
making names consistent with the drm/gem core code.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.d>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250322212608.40511-6-dmitry.osipenko@collabora.com
We don't have a set of kunit tests for the functions under drm_atomic.h.
Let's use the introduction of drm_atomic_get_connector_for_encoder() to
create some tests for it and thus create that set.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250313-bridge-connector-v6-7-511c54a604fb@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The modes used by the client code live on the connectors' mode
lists, which are not owned by the client code, and thus it has
no business modifying the modes. Mark the modes const to make
that fact abundantly clear.
v2: Fix up the kunit test
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303093847.7698-1-ville.syrjala@linux.intel.com
Add XRGB8888 emulation helper for devices that only support BGR888.
Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/9A67EA95-9BC7-4D56-8F87-05EAC1C166AD@live.com
lockdep complains when a lock is released in a separate thread the
lock is taken in, and it turns out that kunit does run its actions in a
separate thread than the test ran in.
This means that drm_kunit_helper_acquire_ctx_alloc() just cannot work as
it's supposed to, so let's just get rid of it.
Suggested-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220132537.2834168-1-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAme7hfkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGU+IH/1bk6zIvAwXXS5yu
KNsQ8dEkC3Xme6HqLtPsAhRLF+5YJf6MaGm1ip5dDMyIvasa2gwvCQQQoOpeMbKj
79VKT+m9t3szMHZaQYjlOuYHBmNSJ4cMCD2Qh6ktXHGPfTTWDFGf7fBwBOkVNeJU
1Ask+bxeop21aJMhfYXrUta3OYyerLBUR6jCiCM82A/GLtdv6oNGXBu3ygDt9Tjx
ZHSl+CYjKpmGUP8JnMKwCBHVguEfqgzZ//dY1H16AvOLed9k2jkMFn8O5Vi3vjnx
TWMMXoiJimuamGzbjxtCCqzxNlFFDT4gRpDqeJxb16W/gDTFmbRr9LDjNehCZe33
AigLZ6M=
=Y/7F
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc4' into drm-next
Backmerge Linux 6.14-rc4 at the request of tzimmermann so misc-next
can base on rc4.
Signed-off-by: Dave Airlie <airlied@redhat.com>
