non-drm:
rust:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
mtd:
- driver for Intel GPU non-volatile storage
i2c
- designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support
-----BEGIN PGP SIGNATURE-----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=n9MO
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
When application A submits jobs and application B submits a job with a
dependency on A's fence, the normal flow wakes up the scheduler after
processing each job. However, the optimization in
drm_sched_entity_add_dependency_cb() uses a callback that only clears
dependencies without waking up the scheduler.
When application A is killed before its jobs can run, the callback gets
triggered but only clears the dependency without waking up the scheduler,
causing the scheduler to enter sleep state and application B to hang.
Remove the optimization by deleting drm_sched_entity_clear_dep() and its
usage, ensuring the scheduler is always woken up when dependencies are
cleared.
Fixes: 777dbd458c ("drm/amdgpu: drop a dummy wakeup scheduler")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250717084453.921097-1-lincao12@amd.com
Fix the compile-time warnings
drivers/gpu/drm/scheduler/sched_entity.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/scheduler/sched_fence.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/scheduler/sched_main.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: a934a57a42 ("scripts/misc-check: check missing #include <linux/export.h> when W=1")
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250612121633.229222-9-tzimmermann@suse.de
All events now start with the same prefix (drm_sched_job_).
drm_sched_job_wait_dep was misleading because it wasn't waiting
at all. It's now replaced by trace_drm_sched_job_unschedulable,
which is only traced if the job cannot be scheduled.
For moot dependencies, nothing is traced.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250526125505.2360-8-pierre-eric.pelloux-prayer@amd.com
We can't trace dependencies from drm_sched_job_add_dependency
because when it's called the job's fence is not available yet.
So instead each dependency is traced individually when
drm_sched_entity_push_job is used.
Tracing the dependencies allows tools to analyze the dependencies
between the jobs (previously it was only possible for fences
traced by drm_sched_job_wait_dep).
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250526125505.2360-6-pierre-eric.pelloux-prayer@amd.com
When an entity from application B is killed, drm_sched_entity_kill()
removes all jobs belonging to that entity through
drm_sched_entity_kill_jobs_work(). If application A's job depends on a
scheduled fence from application B's job, and that fence is not properly
signaled during the killing process, application A's dependency cannot be
cleared.
This leads to application A hanging indefinitely while waiting for a
dependency that will never be resolved. Fix this issue by ensuring that
scheduled fences are properly signaled when an entity is killed, allowing
dependent applications to continue execution.
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250515020713.1110476-1-lincao12@amd.com
The kthread header doesn't need to be included anymore. It's a relict
from commit a6149f0393 ("drm/sched: Convert drm scheduler to use a
work queue rather than kthread").
Remove the unneeded includes.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250314101023.111248-3-phasta@kernel.org
The GPU scheduler's comments refer to a "thread" at various places.
Those are leftovers from commit a6149f0393 ("drm/sched: Convert drm
scheduler to use a work queue rather than kthread").
Replace all references to kthreads.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250314101023.111248-2-phasta@kernel.org
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry 116KHD024006,
Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do
firmware updates in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot / devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs
-----BEGIN PGP SIGNATURE-----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=oK/N
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Outside of drm there are some rust patches from Danilo who maintains
that area in here, and some pieces for drm header check tests.
The major things in here are a new driver supporting the touchbar
displays on M1/M2, the nova-core stub driver which is just the vehicle
for adding rust abstractions and start developing a real driver inside
of.
xe adds support for SVM with a non-driver specific SVM core
abstraction that will hopefully be useful for other drivers, along
with support for shrinking for TTM devices. I'm sure xe and AMD
support new devices, but the pipeline depth on these things is hard to
know what they end up being in the marketplace!
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry
116KHD024006, Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do firmware updates
in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot /
devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector
framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs"
* tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits)
drm/amd/pm: Update feature list for smu_v13_0_6
drm/amdgpu: Add parameter documentation for amdgpu_sync_fence
drm/amdgpu/discovery: optionally use fw based ip discovery
drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics
drm/amdgpu/discovery: check ip_discovery fw file available
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA
drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush
drm/amd/amdgpu: Increase max rings to enable SDMA page ring
drm/amdgpu: Decode deferred error type in gfx aca bank parser
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs
drm/amdgpu/mes: clean up SDMA HQD loop
drm/amdgpu/mes: enable compute pipes across all MEC
drm/amdgpu/mes: drop MES 10.x leftovers
drm/amdgpu/mes: optimize compute loop handling
drm/amdgpu/sdma: guilty tracking is per instance
drm/amdgpu/sdma: fix engine reset handling
drm/amdgpu: remove invalid usage of sched.ready
drm/amdgpu: add cleaner shader trace point
...
The last_scheduled fence leaks when an entity is being killed and adding
the cleanup callback fails.
Decrement the reference count of prev when dma_fence_add_callback()
fails, ensuring proper balance.
Cc: stable@vger.kernel.org # v6.2+
[phasta: add git tag info for stable kernel]
Fixes: 2fdb8a8f07 ("drm/scheduler: rework entity flush, kill and fini")
Signed-off-by: qianyi liu <liuqianyi125@gmail.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311060251.4041101-1-liuqianyi125@gmail.com
The expectation is that the struct drm_device based logging helpers get
passed an actual struct drm_device pointer rather than some random
struct pointer where you can dereference the ->dev member.
Convert drm_err(sched, ...) to dev_err(sched->dev, ...) and
similar. This matches current usage, as struct drm_device is not
available, but drops "[drm]" or "[drm] *ERROR*" prefix from logging.
Unfortunately, there's no dev_WARN_ON(), so the conversion is not
exactly the same.
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fe441dd1469d2b03e6b2ff247078bdde2011c6e3.1737644530.git.jani.nikula@intel.com
Helper is for scheduler internal use so lets hide it from DRM drivers
completely.
At the same time we change the method of checking whethere there is
anything in the queue from peeking to looking at the node count.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221105038.79665-5-tvrtko.ursulin@igalia.com
Idea is to add helpers for peeking and popping jobs from entities with
the goal of decoupling the hidden assumption in the code that queue_node
is the first element in struct drm_sched_job.
That assumption usually comes in the form of:
while ((job = to_drm_sched_job(spsc_queue_pop(&entity->job_queue))))
Which breaks if the queue_node is re-positioned due to_drm_sched_job
being implemented with a container_of.
This also allows us to remove duplicate definitions of to_drm_sched_job.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221105038.79665-2-tvrtko.ursulin@igalia.com
Having removed one re-lock cycle on the entity->lock in a patch titled
"drm/sched: Optimise drm_sched_entity_push_job", with only a tiny bit
larger refactoring we can do the same optimisation on the rq->lock.
(Currently both drm_sched_rq_add_entity() and
drm_sched_rq_update_fifo_locked() take and release the same lock.)
To achieve this we make drm_sched_rq_update_fifo_locked() and
drm_sched_rq_add_entity() expect the rq->lock to be held.
We also align drm_sched_rq_update_fifo_locked(),
drm_sched_rq_add_entity() and
drm_sched_rq_remove_fifo_locked() function signatures, by adding rq as a
parameter to the latter.
v2:
* Fix after rebase of the series.
* Avoid naming inconsistency between drm_sched_rq_add/remove. (Christian)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016122013.7857-6-tursulin@igalia.com
When writing to a drm_sched_entity's run-queue, writers are protected
through the lock drm_sched_entity.rq_lock. This naming, however,
frequently collides with the separate internal lock of struct
drm_sched_rq, resulting in uses like this:
spin_lock(&entity->rq_lock);
spin_lock(&entity->rq->lock);
Rename drm_sched_entity.rq_lock to improve readability. While at it,
re-order that struct's members to make it more obvious what the lock
protects.
v2:
* Rename some rq_lock straddlers in kerneldoc, improve commit text. (Philipp)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
[pstanner: Fix typo in docstring]
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016122013.7857-5-tursulin@igalia.com
In FIFO mode (which is the default), both drm_sched_entity_push_job() and
drm_sched_rq_update_fifo(), where the latter calls the former, are
currently taking and releasing the same entity->rq_lock.
We can avoid that design inelegance, and also have a miniscule
efficiency improvement on the submit from idle path, by introducing a new
drm_sched_rq_update_fifo_locked() helper and pulling up the lock taking to
its callers.
v2:
* Remove drm_sched_rq_update_fifo() altogether. (Christian)
v3:
* Improved commit message. (Philipp)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016122013.7857-2-tursulin@igalia.com
This reverts commit 087913e0ba.
It turned out that the original code was correct since the rq can only
change when there is no armed job for an entity.
This change here broke the logic since we only incremented the counter
for the first job, so revert it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240930131451.536150-1-christian.koenig@amd.com
Entities run queue can change during drm_sched_entity_push_job() so make
sure to update the score consistently.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: d41a39dda1 ("drm/scheduler: improve job distribution with multiple queues")
Cc: Nirmoy Das <nirmoy.das@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.9+
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924101914.2713-4-tursulin@igalia.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Since drm_sched_entity_modify_sched() can modify the entities run queue,
lets make sure to only dereference the pointer once so both adding and
waking up are guaranteed to be consistent.
Alternative of moving the spin_unlock to after the wake up would for now
be more problematic since the same lock is taken inside
drm_sched_rq_update_fifo().
v2:
* Improve commit message. (Philipp)
* Cache the scheduler pointer directly. (Christian)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: b37aced31e ("drm/scheduler: implement a function to modify sched list")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Philipp Stanner <pstanner@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924101914.2713-3-tursulin@igalia.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Without the locking amdgpu currently can race between
amdgpu_ctx_set_entity_priority() (via drm_sched_entity_modify_sched()) and
drm_sched_job_arm(), leading to the latter accesing potentially
inconsitent entity->sched_list and entity->num_sched_list pair.
v2:
* Improve commit message. (Philipp)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: b37aced31e ("drm/scheduler: implement a function to modify sched list")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Philipp Stanner <pstanner@redhat.com>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240913160559.49054-2-tursulin@igalia.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Without the locking amdgpu currently can race between
amdgpu_ctx_set_entity_priority() (via drm_sched_entity_modify_sched()) and
drm_sched_job_arm(), leading to the latter accesing potentially
inconsitent entity->sched_list and entity->num_sched_list pair.
v2:
* Improve commit message. (Philipp)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: b37aced31e ("drm/scheduler: implement a function to modify sched list")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Philipp Stanner <pstanner@redhat.com>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924101914.2713-2-tursulin@igalia.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Function drm_sched_entity_push_job() doesn't have a return value,
remove the return value description for it.
Correct several other typo errors.
v2 (Philipp):
- more correction with related comments.
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240917144732.2758572-1-shuicheng.lin@intel.com
Fixes a race condition reported here: https://github.com/AsahiLinux/linux/issues/309#issuecomment-2238968609
The whole premise of lockless access to a single-producer-single-
consumer queue is that there is just a single producer and single
consumer. That means we can't call drm_sched_can_queue() (which is
about queueing more work to the hw, not to the spsc queue) from
anywhere other than the consumer (wq).
This call in the producer is just an optimization to avoid scheduling
the consuming worker if it cannot yet queue more work to the hw. It
is safe to drop this optimization to avoid the race condition.
Suggested-by: Asahi Lina <lina@asahilina.net>
Fixes: a78422e9df ("drm/sched: implement dynamic job-flow control")
Closes: https://github.com/AsahiLinux/linux/issues/309
Cc: stable@vger.kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Janne Grunau <j@jannau.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240913202301.16772-1-robdclark@gmail.com
Reverse run-queue priority enumeration such that the higest priority is now 0,
and for each consecutive integer the prioirty diminishes.
Run-queues correspond to priorities. To an external observer a scheduler
created with a single run-queue, and another created with
DRM_SCHED_PRIORITY_COUNT number of run-queues, should always schedule
sched->sched_rq[0] with the same "priority", as that index run-queue exists in
both schedulers, i.e. a scheduler with one run-queue or many. This patch makes
it so.
In other words, the "priority" of sched->sched_rq[n], n >= 0, is the same for
any scheduler created with any allowable number of run-queues (priorities), 0
to DRM_SCHED_PRIORITY_COUNT.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231124052752.6915-6-ltuikov89@gmail.com
Rename DRM_SCHED_PRIORITY_MIN to DRM_SCHED_PRIORITY_LOW.
This mirrors DRM_SCHED_PRIORITY_HIGH, for a list of DRM scheduler priorities
in ascending order,
DRM_SCHED_PRIORITY_LOW,
DRM_SCHED_PRIORITY_NORMAL,
DRM_SCHED_PRIORITY_HIGH,
DRM_SCHED_PRIORITY_KERNEL.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231124052752.6915-5-ltuikov89@gmail.com
Don't "wake up" the GPU scheduler unless the entity is ready, as well as we
can queue to the scheduler, i.e. there is no point in waking up the scheduler
for the entity unless the entity is ready.
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
Fixes: bc8d6a9df9 ("drm/sched: Don't disturb the entity when in RR-mode scheduling")
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110000123.72565-2-ltuikov89@gmail.com
Because a) helper is exported to other parts of the scheduler and
b) there isn't a plain drm_sched_wakeup to begin with, I think we can
drop the suffix and by doing so separate the intimiate knowledge
between the scheduler components a bit better.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102105538.391648-6-tvrtko.ursulin@linux.intel.com
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
The GPU scheduler has now a variable number of run-queues, which are set up at
drm_sched_init() time. This way, each driver announces how many run-queues it
requires (supports) per each GPU scheduler it creates. Note, that run-queues
correspond to scheduler "priorities", thus if the number of run-queues is set
to 1 at drm_sched_init(), then that scheduler supports a single run-queue,
i.e. single "priority". If a driver further sets a single entity per
run-queue, then this creates a 1-to-1 correspondence between a scheduler and
a scheduled entity.
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Emma Anholt <emma@anholt.net>
Cc: etnaviv@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20231023032251.164775-1-luben.tuikov@amd.com
drm_sched_entity_kill_jobs_cb() logic is omitting the last fence popped
from the dependency array that was waited upon before
drm_sched_entity_kill() was called (drm_sched_entity::dependency field),
so we're basically waiting for all dependencies except one.
In theory, this wait shouldn't be needed because resources should have
their users registered to the dma_resv object, thus guaranteeing that
future jobs wanting to access these resources wait on all the previous
users (depending on the access type, of course). But we want to keep
these explicit waits in the kill entity path just in case.
Let's make sure we keep all dependencies in the array in
drm_sched_job_dependency(), so we can iterate over the array and wait
in drm_sched_entity_kill_jobs_cb().
We also make sure we wait on drm_sched_fence::finished if we were
originally asked to wait on drm_sched_fence::scheduled. In that case,
we assume the intent was to delegate the wait to the firmware/GPU or
rely on the pipelining done at the entity/scheduler level, but when
killing jobs, we really want to wait for completion not just scheduling.
v2:
- Don't evict deps in drm_sched_job_dependency()
v3:
- Always wait for drm_sched_fence::finished fences in
drm_sched_entity_kill_jobs_cb() when we see a sched_fence
v4:
- Fix commit message
- Fix a use-after-free bug
v5:
- Flag deps on which we should only wait for the scheduled event
at insertion time
v6:
- Back to v4 implementation
- Add Christian's R-b
Cc: Frank Binns <frank.binns@imgtec.com>
Cc: Sarah Walker <sarah.walker@imgtec.com>
Cc: Donald Robson <donald.robson@imgtec.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Suggested-by: "Christian König" <christian.koenig@amd.com>
Reviewed-by: "Christian König" <christian.koenig@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230619071921.3465992-1-boris.brezillon@collabora.com
[Why]
drm_sched_entity_add_dependency_cb ignores the scheduled fence and return false.
If entity's dependency is a scheduler error fence and drm_sched_stop is called
due to TDR, drm_sched_entity_pop_job will wait for the dependency infinitely.
[How]
Do not wait or ignore the scheduled error fence, add drm_sched_entity_wakeup
callback for the dependency with scheduled error fence.
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename drm_sched_wakeup() to drm_sched_wakeup_if_canqueue() since the former
is misleading, as it wakes up the GPU scheduler _only if_ more jobs can be
queued to the underlying hardware.
This distinction is important to make, since the wake conditional in the GPU
scheduler thread wakes up when other conditions are also true, e.g. when there
are jobs to be cleaned. For instance, a user might want to wake up the
scheduler only because there are more jobs to clean, but whether we can queue
more jobs is irrelevant.
v2: Separate "canqueue" to "can_queue". (Alex D.)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://lore.kernel.org/r/20230517233550.377847-2-luben.tuikov@amd.com
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
It already happend a few times that patches slipped through which
implemented access to an entity through a job that was already removed
from the entities queue. Since jobs and entities might have different
lifecycles, this can potentially cause UAF bugs.
In order to make it obvious that a jobs entity pointer shouldn't be
accessed after drm_sched_entity_pop_job() was called successfully, set
the jobs entity pointer to NULL once the job is removed from the entity
queue.
Moreover, debugging a potential NULL pointer dereference is way easier
than potentially corrupted memory through a UAF.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://lore.kernel.org/r/20230418100453.4433-1-dakr@redhat.com
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
After a job is pushed into the queue, it is owned by the scheduler core
and may be freed at any time, so we can't write nor read the submit
timestamp after that point.
Fixes oopses observed with the drm/asahi driver, found with kASAN.
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://lore.kernel.org/r/20230406-scheduler-uaf-2-v1-1-972531cf0a81@asahilina.net
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
After a job is pushed into the queue, it is owned by the scheduler core
and may be freed at any time, so we can't write nor read the submit
timestamp after that point.
Fixes oopses observed with the drm/asahi driver, found with kASAN.
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://lore.kernel.org/r/20230406-scheduler-uaf-2-v1-1-972531cf0a81@asahilina.net
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
The drm_sched_entity_kill() is invoked twice by drm_sched_entity_destroy()
while userspace process is exiting or being killed. First time it's invoked
when sched entity is flushed and second time when entity is released. This
causes a lockup within wait_for_completion(entity_idle) due to how completion
API works.
Calling wait_for_completion() more times than complete() was invoked is a
error condition that causes lockup because completion internally uses
counter for complete/wait calls. The complete_all() must be used instead
in such cases.
This patch fixes lockup of Panfrost driver that is reproducible by killing
any application in a middle of 3d drawing operation.
Fixes: 2fdb8a8f07 ("drm/scheduler: rework entity flush, kill and fini")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://patchwork.freedesktop.org/patch/msgid/20221123001303.533968-1-dmitry.osipenko@collabora.com
The drm_sched_entity_kill() is invoked twice by drm_sched_entity_destroy()
while userspace process is exiting or being killed. First time it's invoked
when sched entity is flushed and second time when entity is released. This
causes a lockup within wait_for_completion(entity_idle) due to how completion
API works.
Calling wait_for_completion() more times than complete() was invoked is a
error condition that causes lockup because completion internally uses
counter for complete/wait calls. The complete_all() must be used instead
in such cases.
This patch fixes lockup of Panfrost driver that is reproducible by killing
any application in a middle of 3d drawing operation.
Fixes: 2fdb8a8f07 ("drm/scheduler: rework entity flush, kill and fini")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123001303.533968-1-dmitry.osipenko@collabora.com
This was buggy because when we had to wait for entities which were
killed as well we would just deadlock.
Instead move all the dependency handling into the callbacks so that
will all happen asynchronously.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014084641.128280-13-christian.koenig@amd.com
UAPI Changes:
- Documentation for page-flip flags
Cross-subsystem Changes:
- dma-buf: Add unlocked variant of vmapping and attachment-mapping
functions
Core Changes:
- atomic-helpers: CRTC primary plane test fixes
- connector: TV API consistency improvements, cmdline parsing
improvements
- crtc-helpers: Introduce drm_crtc_helper_atomic_check() helper
- edid: Fixes for HFVSDB parsing,
- fourcc: Addition of the Vivante tiled modifier
- makefile: Sort and reorganize the objects files
- mode_config: Remove fb_base from drm_mode_config_funcs
- sched: Add a module parameter to change the scheduling policy,
refcounting fix for fences
- tests: Sort the Kunit tests in the Makefile, improvements to the
DP-MST tests
- ttm: Remove unnecessary drm_mm_clean() call
Driver Changes:
- New driver: ofdrm
- Move all drivers to a common dma-buf locking convention
- bridge:
- adv7533: Remove dynamic lane switching
- it6505: Runtime PM support
- ps8640: Handle AUX defer messages
- tc358775: Drop soft-reset over I2C
- ast: Atomic Gamma LUT Support, Convert to SHMEM, various
improvements
- lcdif: Support for YUV planes
- mgag200: Fix PLL Setup on some revisions
- udl: Modesetting improvements, hot-unplug support
- vc4: Fix support for PAL-M
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCY1D3fQAKCRDj7w1vZxhR
xZZgAPoCSfyU3+M3ALT0vQ/OpktE5tuwUBMac2Lxkqgx4dnQ0gEAnYeez0Dedod8
HNdgBH7FTklYa/zT8n17SwHUOzJJ5gc=
=YvuW
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-10-20' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.2:
UAPI Changes:
- Documentation for page-flip flags
Cross-subsystem Changes:
- dma-buf: Add unlocked variant of vmapping and attachment-mapping
functions
Core Changes:
- atomic-helpers: CRTC primary plane test fixes
- connector: TV API consistency improvements, cmdline parsing
improvements
- crtc-helpers: Introduce drm_crtc_helper_atomic_check() helper
- edid: Fixes for HFVSDB parsing,
- fourcc: Addition of the Vivante tiled modifier
- makefile: Sort and reorganize the objects files
- mode_config: Remove fb_base from drm_mode_config_funcs
- sched: Add a module parameter to change the scheduling policy,
refcounting fix for fences
- tests: Sort the Kunit tests in the Makefile, improvements to the
DP-MST tests
- ttm: Remove unnecessary drm_mm_clean() call
Driver Changes:
- New driver: ofdrm
- Move all drivers to a common dma-buf locking convention
- bridge:
- adv7533: Remove dynamic lane switching
- it6505: Runtime PM support
- ps8640: Handle AUX defer messages
- tc358775: Drop soft-reset over I2C
- ast: Atomic Gamma LUT Support, Convert to SHMEM, various
improvements
- lcdif: Support for YUV planes
- mgag200: Fix PLL Setup on some revisions
- udl: Modesetting improvements, hot-unplug support
- vc4: Fix support for PAL-M
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221020072405.g3o4hxuk75gmeumw@houat
When many entities are competing for the same run queue
on the same scheduler, we observe an unusually long wait
times and some jobs get starved. This has been observed on GPUVis.
The issue is due to the Round Robin policy used by schedulers
to pick up the next entity's job queue for execution. Under stress
of many entities and long job queues within entity some
jobs could be stuck for very long time in it's entity's
queue before being popped from the queue and executed
while for other entities with smaller job queues a job
might execute earlier even though that job arrived later
then the job in the long queue.
Fix:
Add FIFO selection policy to entities in run queue, chose next entity
on run queue in such order that if job on one entity arrived
earlier then job on another entity the first job will start
executing earlier regardless of the length of the entity's job
queue.
v2:
Switch to rb tree structure for entities based on TS of
oldest job waiting in the job queue of an entity. Improves next
entity extraction to O(1). Entity TS update
O(log N) where N is the number of entities in the run-queue
Drop default option in module control parameter.
v3:
Various cosmetical fixes and minor refactoring of fifo update function. (Luben)
v4:
Switch drm_sched_rq_select_entity_fifo to in order search (Luben)
v5: Fix up drm_sched_rq_select_entity_fifo loop (Luben)
v6: Add missing drm_sched_rq_remove_fifo_locked
v7: Fix ts sampling bug and more cosmetic stuff (Luben)
v8: Fix module parameter string (Luben)
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Tested-by: Yunxiang Li (Teddy) <Yunxiang.Li@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930041258.1050247-1-luben.tuikov@amd.com
