Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
There will be a merge conflict in drivers/power/supply/ab8500_chargalg.c
with your tree, the merge conflict should be easy (take all the
changes).
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG6PA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylMFwCfSIyAU4oLEgj+/Rfmx4o45cAVIWMAnit3zbdU
wUUCGqKcOnTJEcW6dMPh
=1VVi
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
Documentation: update stable review cycle documentation
drivers/base/dd.c : Remove the initial value of the global variable
Documentation: update stable tree link
Documentation: add link to stable release candidate tree
devres: fix typos in comments
Documentation: add note block surrounding security patch note
samples/kobject: Use sysfs_emit instead of sprintf
base: soc: Make soc_device_match() simpler and easier to read
driver core: dd: fix return value of __setup handler
driver core: Refactor sysfs and drv/bus remove hooks
driver core: Refactor multiple copies of device cleanup
scripts: get_abi.pl: Fix typo in help message
kernfs: fix typos in comments
kernfs: remove unneeded #if 0 guard
ALSA: hda/realtek: Make use of the helper component_compare_dev_name
video: omapfb: dss: Make use of the helper component_compare_dev
power: supply: ab8500: Make use of the helper component_compare_dev
ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of
iommu/mediatek: Make use of the helper component_compare/release_of
drm: of: Make use of the helper component_release_of
...
On devices with DMM, all allocations are done through either DMM or TILER.
DMM/TILER being a limited resource means that such allocations will start
to fail before actual free memory is exhausted. What is even worse is that
with time DMM/TILER space gets fragmented to the point that even if we have
enough free DMM/TILER space and free memory, allocation fails because there
is no big enough free block in DMM/TILER space.
Such failures can be easily observed with OMAP xorg DDX, for example -
starting few GUI applications (so buffers for their windows are allocated)
and then rotating landscape<->portrait while closing and opening new
windows soon results in allocation failures.
Fix that by mapping buffers through DMM/TILER only when really needed,
like, for scanout buffers.
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1642587791-13222-4-git-send-email-ivo.g.dimitrov.75@gmail.com
Currently code allocates non-scanout BOs from SHMEM and those objects are
accessible to userspace by mmap(). However, on devices with no DMM (like
OMAP3), the same objects are not accessible by kernel drivers that want to
render to them as code refuses to export them. In turn this means that on
devices with no DMM, all buffers must be allocated as scanout, otherwise
only CPU can access them. On those devices, scanout buffers are allocated
from CMA, making those allocations highly unreliable.
Fix that by implementing functionality to export SHMEM backed buffers on
devices with no DMM. This makes CMA memory only being used when needed,
instead for every buffer that has to be off-CPU rendered.
Tested on Motorola Droid4 and Nokia N900
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1642587791-13222-3-git-send-email-ivo.g.dimitrov.75@gmail.com
Fix the following coccicheck warning:
./drivers/gpu/drm/omapdrm/omap_overlay.c:89:22-25: ERROR: r_ovl is NULL
but dereferenced.
Here should be ovl->idx rather than r_ovl->idx.
Fixes: e02b5cc9e8 ("drm/omap: Add a 'right overlay' to plane state")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220307095612.409090-1-wanjiabing@vivo.com
The omap KMS driver will call drm_plane_create_color_properties() with
a default encoding and range values of BT601 and Full Range,
respectively.
Since the initial value wasn't carried over in the state, the driver had
to set it again in omap_plane_reset(). However, the helpers have been
adjusted to set it properly at reset, so this is not needed anymore.
Reviewed-by: Tomi Valkeinen <tomba@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-23-maxime@cerno.tech
The omap KMS driver will call drm_plane_create_zpos_property() with an
init value of the plane index and the plane type.
Since the initial value wasn't carried over in the state, the driver had
to set it again in omap_plane_reset(). However, the helpers have been
adjusted to set it properly at reset, so this is not needed anymore.
Reviewed-by: Tomi Valkeinen <tomba@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-15-maxime@cerno.tech
While the omap_plane_init() function calls
drm_plane_create_zpos_property() with an initial value of 0,
omap_plane_reset() will force it to another value depending on the plane
type.
Fix the discrepancy by setting the initial zpos value to the same value
in the drm_plane_create_zpos_property() call.
Reviewed-by: Tomi Valkeinen <tomba@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095918.18763-5-maxime@cerno.tech
According to disable Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
DRM drivers will not perform display-mode changes or accelerated rendering
and only the system framebuffer will be available if it was set-up.
But only a few DRM drivers currently check for nomodeset, make this driver
to also support the command line parameter.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211217003752.3946210-31-javierm@redhat.com
Currently omapdrm driver does not initialize dma_buf_export_info resv
member, which leads to a new dma_resv being allocated and attached to
the exported dma_buf. This leads to the issue that fences created on
dma_buf objects imported by other drivers are ignored by omapdrm, as only
fences in gem object resv are waited on. This leads to various issues like
displaying incomplete frames.
Fix that by initializing dma_buf resv to the resv of the gem object being
exported.
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1641397018-29872-1-git-send-email-ivo.g.dimitrov.75@gmail.com
Using the SET_RUNTIME_PM_OPS() macro causes a warning about the
referenced functions when they are marked static but not __maybe_unused:
drivers/gpu/drm/omapdrm/dss/dss.c:1572:12: error: unused function 'dss_runtime_suspend' [-Werror,-Wunused-function]
drivers/gpu/drm/omapdrm/dss/dss.c:1584:12: error: unused function 'dss_runtime_resume' [-Werror,-Wunused-function]
drivers/gpu/drm/omapdrm/dss/dispc.c:4845:12: error: unused function 'dispc_runtime_suspend' [-Werror,-Wunused-function]
drivers/gpu/drm/omapdrm/dss/dispc.c:4860:12: error: unused function 'dispc_runtime_resume' [-Werror,-Wunused-function]
Fixes: b92f7ea556 ("drm/omap: dss: Make use of the helper macro SET_RUNTIME_PM_OPS()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211205131612.3192652-1-arnd@kernel.org
If the drm_plane has a source width that's greater than the max width
supported by a single hw overlay, then we assign a 'r_overlay' to it in
omap_plane_atomic_check().
Both overlays should have the capabilities required to handle the source
framebuffer. The only parameters that vary between the left and right
hwoverlays are the src_w, crtc_w, src_x and crtc_x as we just even chop
the fb into left and right halves.
We also take care of not creating odd width size when dealing with YUV
formats.
Since both halves need to be 'appear' side by side the zpos is
recalculated when dealing with dual overlay cases so that the other
planes zpos is consistent.
Depending on user space usage it is possible that on occasion the number
of requested planes exceeds the numbers of overlays required to display
them. In that case a failure would be returned for the plane that cannot
be handled at that time. It is up to user space to make sure the H/W
resource are not over-subscribed.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-10-narmstrong@baylibre.com
Now that we added specific item to our subclassed drm_plane_state
we can add omap_plane_atomic_print_state() helper to dump out our own
driver specific plane state.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-9-narmstrong@baylibre.com
(re)assign the hw overlays to planes based on required caps, and to
handle situations where we could not modify an in-use plane.
This means all planes advertise the superset of formats and properties.
Userspace must (as always) use atomic TEST_ONLY step for atomic updates,
as not all planes may be available for use on every frame.
The mapping of hwoverlays to plane is stored in omap_global_state, so
that state updates are atomically committed in the same way that
plane/etc state updates are managed. This is needed because the
omap_plane_state keeps a pointer to the hwoverlay, and we don't want
global state to become out of sync with the plane state if an atomic
update fails, we hit deadlock/ backoff scenario, etc. The use of
global_state_lock keeps multiple parallel updates which both re-assign
hwoverlays properly serialized.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-8-narmstrong@baylibre.com
Global shared resources (like hw overlays) for omapdrm are implemented
as a part of atomic state using the drm_private_obj infrastructure
available in the atomic core.
omap_global_state is introduced as a drm atomic private object. The two
funcs omap_get_global_state() and omap_get_existing_global_state() are
the two variants that will be used to access omap_global_state.
drm_mode_config_init() needs to be called earlier because it
creates/initializes the private_obj link list maintained by the atomic
framework. The private_obj link list has to exist prior to calling
drm_atomic_private_obj_init(). Similarly the cleanup handler are
reordered appropriately.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-7-narmstrong@baylibre.com
In preparation to add omap plane state specific extensions we need to
subclass drm_plane_state and add the relevant helpers.
The addition of specific extension will be done separately.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-6-narmstrong@baylibre.com
Split out the hardware overlay specifics from omap_plane.
To start, the hw overlays are statically assigned to planes.
The goal is to eventually assign hw overlays dynamically to planes
during plane->atomic_check() based on requested caps (scaling, YUV,
etc). And then perform hw overlay re-assignment if required.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-5-narmstrong@baylibre.com
In order to be able to dynamically assign overlays to planes we need to
be able to asses the overlay capabilities.
Add a helper function to be able to retrieve the supported capabilities
of an overlay.
And export the function to check if a fourcc is supported on a given
overlay.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-4-narmstrong@baylibre.com
We currently assume that an overlay has the same maximum width and
maximum height as the overlay manager. This assumption is incorrect. On
some variants the overlay manager maximum width is twice the maximum
width that the overlay can handle. We need to add the appropriate data
per variant as well as export a helper function to retrieve the data so
check can be made dynamically in omap_plane_atomic_check().
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-3-narmstrong@baylibre.com
Call drm_atomic_helper_check_plane_state() from the plane
atomic_check() callback in order to add plane state sanity
checking.
It will permit filtering out totally bad scaling factors, even
if the real check are done later in the atomic commit.
Calling drm_atomic_helper_check_plane_state() also sets
plane_state->visible which will be useful when dynamically
assigning hw overlays to planes.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117141928.771082-2-narmstrong@baylibre.com
Memory of BOs backed by TILER is not contiguous, but omap_gem_map_dma_buf()
exports it like it is. This leads to (possibly) invalid memory accesses if
another device imports such a BO.
Fix that by providing sg that correctly describes TILER memory layout.
Align TILER allocations to page, so importer to be able to correctly set
its MMU if have one. Set export size accounting for the alignment. Also,
make sure to destroy sg on unpin, as it is no longer valid.
Tested on Motorola Droid4 by using GPU (sgx540) to render.
Suggested-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1637309180-31032-1-git-send-email-ivo.g.dimitrov.75@gmail.com
DSS5's maximum tv pclk rate (i.e. HDMI) is set to 186MHz, which comes
from the TRM (DPLL_HDMI_CLK1 frequency must be lower than 186 MHz). To
support DRA76's wide screen HDMI feature, we need to increase this
maximum rate.
Testing shows that the PLL seems to work fine even with ~240MHz clocks,
and even the HDMI output at that clock is stable enough for monitors to
show a picture. This holds true for all DRA7 and AM5 SoCs (and probably
also for OMAP5).
However, the highest we can go without big refactoring to the clocking
code is 192MHz, as that is the DSS func clock we get from the PRCM. So,
increase the max HDMI pixel clock to 192MHz for now, to allow some more
2k+ modes to work.
This patch never had a clear confirmation from HW people, but this
change stayed on production trees for multiple years without any report
on an eventual breakage.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211012133939.2145462-1-narmstrong@baylibre.com
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831135707.4676-1-caihuoqing@baidu.com
Use the helper macro SET_RUNTIME_PM_OPS() instead of the verbose
operators ".runtime_suspend/.runtime_resume", because the
SET_RUNTIME_PM_OPS() is a nice helper macro that could be brought
in to make code a little clearer, a little more concise.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210828084811.104-1-caihuoqing@baidu.com
Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage,
reviewed and acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by
the hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in
arm64 for allmodconfig, but that change is on its way through
the drm tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPX2A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymUUgCbB4EKysgLuXYdjUalZDx+vvZO4k0AniS14O4k
F+2dVSZ5WX6wumUzCaA6
=bXQM
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage, reviewed and
acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by the
hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in arm64
for allmodconfig, but that change is on its way through the drm
tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates"
* tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits)
comedi: dt9812: fix DMA buffers on stack
comedi: ni_usb6501: fix NULL-deref in command paths
arm64: errata: Enable TRBE workaround for write to out-of-range address
arm64: errata: Enable workaround for TRBE overwrite in FILL mode
coresight: trbe: Work around write to out of range
coresight: trbe: Make sure we have enough space
coresight: trbe: Add a helper to determine the minimum buffer size
coresight: trbe: Workaround TRBE errata overwrite in FILL mode
coresight: trbe: Add infrastructure for Errata handling
coresight: trbe: Allow driver to choose a different alignment
coresight: trbe: Decouple buffer base from the hardware base
coresight: trbe: Add a helper to pad a given buffer area
coresight: trbe: Add a helper to calculate the trace generated
coresight: trbe: Defer the probe on offline CPUs
coresight: trbe: Fix incorrect access of the sink specific data
coresight: etm4x: Add ETM PID for Kryo-5XX
coresight: trbe: Prohibit trace before disabling TRBE
coresight: trbe: End the AUX handle on truncation
coresight: trbe: Do not truncate buffer on IRQ
coresight: trbe: Fix handling of spurious interrupts
...
In order to better track where in the kernel the dma-buf code is used,
put the symbols in the namespace DMA_BUF and modify all users of the
symbols to properly import the namespace to not break the build at the
same time.
Now the output of modinfo shows the use of these symbols, making it
easier to watch for users over time:
$ modinfo drivers/misc/fastrpc.ko | grep import
import_ns: DMA_BUF
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20211010124628.17691-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver accesses the drm_bridge.of_node field, which is present only
if CONFIG_OF is enabled. As all platforms using omapdrm are OF-based, we
can simply depend on CONFIG_OF.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On 64-bit platforms, the compiler complains that casting a void pointer
to an unsigned int loses data. Cast the pointer to a uintptr_t to fix
this.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The correct format specifier for size_t is %zu. Using %d (or %u)
generates a warning on 64-bit platforms. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Commit 55b68fb856 ("drm/omap: squash omapdrm sub-modules into one")
removes the config OMAP2_DSS in ./drivers/gpu/drm/omapdrm/dss/Kconfig,
while moving the other configs into./drivers/gpu/drm/omapdrm/Kconfig, but
misses to remove an obsolete selection of OMAP2_DSS in config DRM_OMAP.
Hence, ./scripts/checkkconfigsymbols.py warns:
OMAP2_DSS
Referencing files: drivers/gpu/drm/omapdrm/Kconfig
Remove this reference in an obsolete selection.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210819112253.16484-6-lukas.bulwahn@gmail.com
Being informed of a failure to attach a bridge is useful, and many
drivers prints an error message in that case. Move the message to
drm_bridge_attach() to avoid code duplication.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
The comment refers to drm_irq_install() et al, which are not used by
omapdrm. The functions are part of the DRM IRQ midlayer and shouldn't
be used any longer. Remove the comment.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706073125.7689-1-tzimmermann@suse.de
Replace usage of struct drm_device.irq_enabled with the driver's
own state field struct omap_drm_device.irq_enabled. The field in
the DRM device structure is considered legacy and should not be
used by KMS drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625082222.3845-16-tzimmermann@suse.de
I guess no one ever tried running omap together with lima or panfrost,
not even sure that's possible. Anyway for consistency, fix this.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tomi Valkeinen <tomba@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-12-daniel.vetter@ffwll.ch
msm-next pull request has a baseline with stuff from -fixes, roll
forward first.
Some simple conflicts in amdgpu, ttm and one in i915 where git gets
confused and tries to add the same function twice.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
struct dss_device has been declared. Remove the duplicate.
And sort these forward declarations alphabetically.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325111028.864628-1-wanjiabing@vivo.com
fixed the following coccicheck:
./drivers/gpu/drm/omapdrm/dss/dsi.c:4329:7-27: ERROR: Threaded IRQ with
no primary handler requested without IRQF_ONESHOT
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fixes: 4c1b935fea ("drm/omap: dsi: move TE GPIO handling into core")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1616492093-68237-1-git-send-email-yang.lee@linux.alibaba.com
An old patch added a 'return' statement after each BUG() in this driver,
which was necessary at the time, but has become redundant after the BUG()
definition was updated to handle this properly.
gcc-11 now warns about one such instance, where the 'return' statement
was incorrectly indented:
drivers/gpu/drm/omapdrm/dss/dispc.c: In function ‘pixinc’:
drivers/gpu/drm/omapdrm/dss/dispc.c:2093:9: error: this ‘else’ clause does not guard... [-Werror=misleading-indentation]
2093 | else
| ^~~~
drivers/gpu/drm/omapdrm/dss/dispc.c:2095:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘else’
2095 | return 0;
| ^~~~~~
Address this by removing the return again and changing the BUG()
to be unconditional to make this more intuitive.
Fixes: c6eee968d4 ("OMAPDSS: remove compiler warnings when CONFIG_BUG=n")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210322164203.827324-1-arnd@kernel.org
r is "u32" always >= 0,mipi_dsi_create_packet may return little than zero.
so r < 0 condition is never accessible.
Fixes coccicheck warnings:
./drivers/gpu/drm/omapdrm/dss/dsi.c:2155:5-6:
WARNING: Unsigned expression compared with zero: r < 0
Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210312071445.1721-1-angkery@163.com
Many drivers reference the plane->state pointer in order to get the
current plane state in their atomic_update or atomic_disable hooks,
which would be the new plane state in the global atomic state since
_swap_state happened when those hooks are run.
Use the drm_atomic_get_new_plane_state helper to get that state to make it
more obvious.
This was made using the coccinelle script below:
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
)
@ adds_new_state @
identifier plane_atomic_func.func;
identifier plane, state;
identifier new_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state)
{
...
- struct drm_plane_state *new_state = plane->state;
+ struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
...
}
@ include depends on adds_new_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_new_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.
The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.
Let's convert all the remaining helpers to provide a consistent
interface, starting with the planes atomic_check.
The conversion was done using the coccinelle script below plus some
manual changes for vmwgfx, built tested on all the drivers.
@@
identifier plane, plane_state;
symbol state;
@@
struct drm_plane_helper_funcs {
...
int (*atomic_check)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_check = func,
...,
};
@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier dev;
identifier plane, plane_state, state;
@@
f(struct drm_device *dev, struct drm_atomic_state *state)
{
<+...
- FUNCS->atomic_check(plane, plane_state)
+ FUNCS->atomic_check(plane, state)
...+>
}
@ ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
... when != new_plane_state
}
@ adds_new_state depends on plane_atomic_func && !ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
+ struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane);
...
}
@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane,
- struct drm_plane_state *new_plane_state
+ struct drm_atomic_state *state
)
{ ... }
@ include depends on adds_new_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_new_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
Nothing special, just put the end right after hw_done(). Note that in
one path there's a wait for the flip/update to complete. But as far as
I understand from comments and code that's only relevant for modesets,
and skipped if there wasn't a modeset done on a given crtc.
For a bit more clarity pull the hw_done() call out of the if/else,
that way it's a bit clearer flow. But happy to shuffle this around as
is seen fit.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-9-daniel.vetter@ffwll.ch
The 'r' in dsi_vc_send_short() is of type 'unsigned int', so the
'r < 0' can't be true.
Fix this by introducing a 'err' of type 'int' insteaded.
Fixes: 1ed6253856 ("drm/omap: dsi: switch dsi_vc_send_long/short to mipi_dsi_msg")
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127015117.23267-1-dong.menglong@zte.com.cn
Panel drivers can send DSI commands in panel's prepare(), which happens
before the bridge's enable() is called. The OMAP DSI driver currently
only sets up the DSI interface at bridge's enable(), so prepare() cannot
be used to send DSI commands.
This patch fixes the issue by making it possible to enable the DSI
interface any time a command is about to be sent. Disabling the
interface is be done via delayed work.
Clarifications for the delayed disable work and the panel doing DSI
transactions:
bridge_enable: If the disable callback is called just before
bridge_enable takes the dsi_bus_lock, no problem, bridge_enable just
enables the interface again. If the callback is ran just after
bridge_enable's dsi_bus_unlock, no problem, dsi->video_enabled == true
so the callback does nothing.
bridge_disable: similar to bridge-enable, the callback won't do anything
if video_enabled == true, and after bridge-disable has turned the video
and the interface off, there's nothing to do for the callback.
omap_dsi_host_detach: this is called when the panel does
mipi_dsi_detach(), and we expect the panel to _not_ do any DSI
transactions after (or during) mipi_dsi_detatch(), so there are no
race conditions.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-85-tomi.valkeinen@ti.com
We only need to set VC_CTRL:DCS_CMD_ENABLE for command mode panels when
the HW has DSI_QUIRK_DCS_CMD_CONFIG_VC quirk. The old code did this
right by accident, but now we set DCS_CMD_ENABLE for video mode panels
too.
Fix this by skipping the set for video mode.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-84-tomi.valkeinen@ti.com
ULPS is a niche power-saving feature which only really affects command
mode panels showing a static picture. I know the ULPS code used to work
very long time ago, but I could not get it working with the current
driver. As the ULPS code is not trivial and includes delayed work (so
lots of chances for race issues), and just keeping DSI video and command
mode panels working has been challenging enough even without ULPS, lets
remove ULPS support.
When the DSI driver works reliably for command and video mode displays,
someone interested can work on ULPS and add it back if the power saving
is substantial enough.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-83-tomi.valkeinen@ti.com
The driver ignores MIPI_DSI_CLOCK_NON_CONTINUOUS, and always uses
non-continuous clock.
Fix this by using MIPI_DSI_CLOCK_NON_CONTINUOUS and at the same time,
drop ddr_clk_always_on field which seems pretty useless.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-82-tomi.valkeinen@ti.com
Clean up the code by separating video-mode enable/disable code into
functions of their own.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-81-tomi.valkeinen@ti.com
The function names have evolved to be very confusing, and bunch of them
have "display" in them even if the function doesn't deal with display as
such (e.g. dsi_display_enable which just enables the DSI interface).
Rename them by dropping the "display".
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-79-tomi.valkeinen@ti.com
We can drop dsi_display_disable() which just calls
_dsi_display_disable(), and rename _dsi_display_disable() to
dsi_display_disable().
The WARN_ON(!dsi_bus_is_locked(dsi)) in dsi_display_disable is extra and
can be dropped, as _dsi_display_disable() has the same WARN_ON().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-78-tomi.valkeinen@ti.com
We can drop dsi_display_enable(), which just calls
_dsi_display_enable(), and rename _dsi_display_enable() to
dsi_display_enable().
The WARN_ON(!dsi_bus_is_locked(dsi)) in dsi_display_enable is extra and
can be dropped, as _dsi_display_enable() has the same WARN_ON().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-77-tomi.valkeinen@ti.com
Clean up the code by inlining dsi_enable_video_outputs and
dsi_disable_video_outputs functions.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-76-tomi.valkeinen@ti.com
Move structs and defines to a private dsi.h header file to make dsi.c a
bit easier to navigate. Also move the (now) private structs and defines
from omapdss.h to dsi.h.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-75-tomi.valkeinen@ti.com
For command mode panels we can use a single VC for sending command and
video data, even if we have to change the data source for that VC when
going from command to video or vice versa.
However, with video mode panels we want to keep the pixel data VC
enabled, and use another VC for command data, and the commands will get
interleaved into the pixel data.
This patch makes the driver use VC0 for commands and VC1 for video.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-71-tomi.valkeinen@ti.com
We currently use a single VC for sending commands and pixel data. The
LP/HS mode for pixel data is correctly set to HS by accident, as we have
set the VC to HS already earlier.
However, if we use a different VC for video data, the VC is in LP mode.
Fix this by always enabling HS mode before starting a frame update.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-70-tomi.valkeinen@ti.com
Simplify and optimize dsi_vc_enable_hs() so that it can be called
without checking the current HS/LP mode. Make dsi_vc_enable_hs() return
if the VC is already in the correct mode.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-69-tomi.valkeinen@ti.com
DSI virtual channel and hardware VC blocks have gotten tangled as
described in the previous commits. This has not caused any issues, as
the value for both is 0, so it happens to work.
To fix the issue, change the code to use the correct one of the two.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-68-tomi.valkeinen@ti.com
To start fixing the issues related to channels and vcs described in the
previous commit, pass vc and/or channel to various functions which will
need it do properly handle different DSI channels and VCs.
No functional changes.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-67-tomi.valkeinen@ti.com
The "channel" usage in omap dsi driver is confusing. We have three
different "channels":
1) DSI virtual channel ID. This is a number from 0 to 3, included in the
packet payload.
2) VC. This is a register block in the DSI IP. There are four of those
blocks. A VC is a DSI "pipeline", with defined fifo settings, data
source (cpu or dispc), and some other settings. It has no relation to
the 1).
3) dispc channel. It's the "pipeline" number dispc uses to send pixel
data.
The previous patch handled the third case.
To start fixing 1) and 2), we first rename all uses of 'channel' to
'vc', as in most of the cases that is the correct thing to use.
However, in some places 1) and 2) have gotten mixed up (i.e. the code
uses msg->channel when it should use vc), which will be fixed in the
following patch.
Note that mixing 1) and 2) currently is "fine", as at the moment we only
support DSI peripherals with DSI virtual channel 0, and we always use
VC0 to send data. So both 1) and 2) are always 0.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-66-tomi.valkeinen@ti.com
The "channel" usage in omap dsi driver is confusing. As the first step,
change "channel" to "dispc_channel" when dealing with the dispc channel.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-65-tomi.valkeinen@ti.com
A DSI peripheral can have virtual channel ID of 0-3. This should be
always the case, and there's no need in the driver to validate the
channel.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-64-tomi.valkeinen@ti.com
The VC handling has gotten quite tangled up. As the first step to clean
it up, lets define that we only support a single DSI peripheral (which
was really already the case), and we always use VC0 (define VC_DEFAULT
0) register block to send data to the peripheral.
We can thus have a single mipi_dsi_device pointer and remove the
for-loops which made passes over all the four VCs (just the first one
was ever used).
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-63-tomi.valkeinen@ti.com
The OMAP DSI command mode panel driver used to send page & column
address before each frame update, and this code was moved into the DSI
host driver when converting it to the DRM bridge model.
However, it's not really required to send the page & column address
before each frame. It's also something that doesn't really belong to the
DSI host driver, so we should drop the code.
That said, frame updates break if we don't send _something_ between the
frames. A NOP command does the trick.
It is not clear if this behavior is as expected from a DSI command mode
frame transfer, or is it a feature/issue with OMAP DSI driver, or a
feature/issue in the command mode panel used.
Most likely this is related to the following from the DSI spec:
"To enable PHY synchronization the host processor should periodically
end HS transmission and drive the Data Lanes to the LP state. This
transition should take place at least once per frame."
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-62-tomi.valkeinen@ti.com
The DSI host driver currently ignores the video mode flags in
client->mode_flags. Add the code to take the transfer mode from client's
mode_flags.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-60-tomi.valkeinen@ti.com
If the PLL calc function is given bad parameters, n_start/m_start may be
higher than n_stop/m_stop, which leads to the loops iterating through
the whole u32 number space.
Fix this by failing early on such cases.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-59-tomi.valkeinen@ti.com
dss_mgr_ops was needed with the multi-module architecture, but is no
longer needed. We can thus remove it and use direct calls.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-55-tomi.valkeinen@ti.com
dispc_ops was created to help with the multi-module architecture and
giving us the possibility of multiple dispc implementations. Neither of
these is valid anymore, and we can remove dispc_ops and use direct
calls to dispc.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-54-tomi.valkeinen@ti.com
At the moment we have three different modules: omapdss-base, omapdss,
omapdrm. This setup is finally obsolete, as the last omapdrm specific
panel has been converted to DRM panel.
We can thus remove omapdss-base and omapdss, and just compile everything
into omapdrm.ko.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-51-tomi.valkeinen@ti.com
Simplify DSI pin config, which always originates from DT
nowadays. With the code being fully contained in the DSI
encoder, we can drop the public structure.
Since the function is no longer exposed, it now directly
takes the private DSI data pointer. This drops a pointless
conversion and means the pins can be configured earlier.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-49-tomi.valkeinen@ti.com
Move dsi_ops into the main structure, since all other ops
are gone. Instead of checking the device type we can simply
check if dsi_ops are set.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-48-tomi.valkeinen@ti.com
All displays are now using a drm_panel or a drm_bridge that models the
connector instead of dssdev, so this field is always 0 and can be
dropped.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-47-tomi.valkeinen@ti.com
Since all encoders and panels are using the bridge API now,
we next pointer is no longer useful and can be dropped.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-45-tomi.valkeinen@ti.com
We no longer need to check for the DSS API, since all encoders,
panels and connectors have been converted to the bridge API.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-44-tomi.valkeinen@ti.com
Remove unused code. Connectors are now created via drm_bridge_connector_init()
and no longer OMAP specific.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-43-tomi.valkeinen@ti.com
All DSS devices have been converted to bridge API, so
the device operations are always NULL. This removes
the device ops function pointers and all code using it.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-42-tomi.valkeinen@ti.com
In order to integrate with a chain of drm_bridge, the internal DSI
output has to expose its operations through the drm_bridge API.
Register a bridge at initialisation time to do so and remove the
omap_dss_device operations that are now unused.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-41-tomi.valkeinen@ti.com
The panel driver is no longer using any OMAP specific APIs, so
let's move it into the generic panel directory.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-40-tomi.valkeinen@ti.com
We can simply provide the device to the omapdrm driver
via pdata. omapdss_is_initialized() is no longer required
(even before this patch), since omapdrm device is only
registered after the pointer is initialized.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-39-tomi.valkeinen@ti.com
Do not try to reset the panel after DSI has been
detached, since the DSI clocks may have been disabled
at this point. The panel will be disabled and unprepared
before being removed and a reset will be done when being
probed again.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-38-tomi.valkeinen@ti.com
Now, that the driver implements the common DRM panel API
the unbind no longer needs to be suppressed.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-37-tomi.valkeinen@ti.com
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-36-tomi.valkeinen@ti.com
Implement check timings, which will check if it's possible to
configure the clocks for the provided mode using the same code
as the set_config() hook.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-35-tomi.valkeinen@ti.com
The table of compatible values needed to be prefixed with "omapdss,"
is empty, so all of this code is doing nothing now. Let's drop it.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-34-tomi.valkeinen@ti.com
Due to previous changes the DSI encoder gets the capabilities
via DSI client's mode_flags and no longer needs the omapdss
specific caps. The core code now checks if the DSI encoder
is actually configured into command mode instead of just checking
the panel capabilities.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-32-tomi.valkeinen@ti.com
Complete the direction reversal of the DSS device enable/disable
operations started by commit 19b4200d8f ("drm/omap: Reverse direction
of the DSS device enable/disable operations").
This effectively drops the requirement of calling DSS specific
code from the DSI panel driver moving it a bit further to a
standard drm_panel driver.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-31-tomi.valkeinen@ti.com
Move ULPS handling into the DSI host controller, so that we
no longer need a custom API for the DSI client.
Note that for now ULPS is always disabled.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-29-tomi.valkeinen@ti.com
Create a custom function pointer for ULPS and use it instead of
reusing disable/enable functions for ULPS mode switch. This allows
us to use the common disable/enable functions pointers for DSI.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-28-tomi.valkeinen@ti.com
Instead of using the custom enable_te() API, this automatically
enables/disables TE core support when a matching packet is sent
to the panel.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-26-tomi.valkeinen@ti.com
In preparation for removing custom DSS calls from the DSI
panel driver, this moves support for external tearing event
GPIOs into the DSI host driver. This way tearing events are
always handled in the core resulting in simplification of
the panel drivers.
The TE GPIO acquisition follows works in the same way as the
exynos DSI implementation.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-25-tomi.valkeinen@ti.com
Integrate low-power / high-speed bus switching into transfer
function and drop the omapdrm specific enable_hs() callback.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-24-tomi.valkeinen@ti.com
Use bulk regulator API to simplify the code. This also switches
from _optional variant to normal variant, which will provide a
dummy regulator (i.e. if some always-enabled regulator is not
described in DT).
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-23-tomi.valkeinen@ti.com
The DSI sync() function only locks the bus and then releases
it again. Currently the only invocation is directly before
update(), which locks the bus anyways.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-21-tomi.valkeinen@ti.com
Drop custom request_vc/release_vc callbacks by using the
generic mipi_dsi_attach/mipi_dsi_detach functions.
To use mipi_dsi_attach() we need to fill in the mipi_dsi_device fields,
and some of these fields overlap with the fields in omap_dss_dsi_config.
In later patches the latter will get dropped.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-15-tomi.valkeinen@ti.com
After converting the driver to mipi_dsi_device we can use the generic
message helpers to simplify the driver a lot.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-14-tomi.valkeinen@ti.com
This moves from custom platform driver infrastructure to mipi_dsi_host
and mipi_dsi_device. Note, that this is a graduate step and the driver
only uses the devices types and transfer function, but not yet the new
device binding style or drm_panel.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-13-tomi.valkeinen@ti.com
Simplify the DSI encoder by using mipi_dsi_msg for
dsi_vc_send_long and dsi_vc_send_short. Further improvements
require cleaning up the channel allocation code first.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-12-tomi.valkeinen@ti.com
Simplify the read related message handling by using the functionality
provided by CONFIG_DRM_MIPI_DSI.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-11-tomi.valkeinen@ti.com
Simplify the write related messages handling by using the functionality
provided by CONFIG_DRM_MIPI_DSI.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-10-tomi.valkeinen@ti.com
This drops the virtual channel logic. Afterwards DSI clients
request their channel number and get the virtual channel with
the same number or -EBUSY if already in use.
The change here is not strictly speaking correct, as it combines the VC
(DSI's "configuration block") and virtual channel ID (the ID sent in the
DSI packets). But as we currently only support a single DSI command mode
panel, this works fine: we always use VC0, and VC ID 0.
This needs more work to support video mode panels, but that can be done
after moving to DRM bridge and panel model, after which we can do that
work with the proper APIs.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-9-tomi.valkeinen@ti.com
This converts the panel-dsi-cm driver to use the transfer
API instead of specific functions, so that the specific
functions can be unexported and squashed into the generic
transfer function.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-7-tomi.valkeinen@ti.com
This prepares the driver for becoming a mipi_dsi_host implementation,
which provides a generic transfer function instead of all kind of
different read/write functions. The implementation will become more
elegant after unexporting the specific functions in the following
patches.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-6-tomi.valkeinen@ti.com
The panel-dsi-cm's ddata->pin_config is always NULL, so this
callback is never called. Instead the DSI encoder gets the pin
configuration directly from DT.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-3-tomi.valkeinen@ti.com
This reverts commit e086558ae9 ("drm/omap: dss: Remove unused
omap_dss_device operations")
This is still needed by DSI. E.g. unloading modules without this will
cause a crash.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-2-tomi.valkeinen@ti.com
Adds support for COLOR_ENCODING and COLOR_RANGE properties to
omap_plane.c and dispc.c. The supported encodings and ranges are
presets are:
For COLOR_ENCODING:
- YCbCr BT.601 (default)
- YCbCr BT.709
For COLOR_RANGE:
- YCbCr limited range
- YCbCr full range (default)
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103080310.164453-6-tomi.valkeinen@ti.com
Implement CTM color management property for OMAP CRTC using DSS
overlay manager's Color Phase Rotation matrix. The CPR matrix does not
exactly match the CTM property documentation. On DSS the CPR matrix is
applied after gamma table look up. However, it seems stupid to add a
custom property just for that.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103080310.164453-4-tomi.valkeinen@ti.com
omapdrm supports gamma via GAMMA_LUT property. However, the HW we have
is:
gamma -> ctm -> out
instead of what the model DRM framework uses:
ctm -> gamma -> out
As the following patches add CTM support for omapdrm, lets first fix the
gamma.
This patch changes the property from GAMMA_LUT to DEGAMMA_LUT, and thus
we will have:
degamma -> ctm -> out
and the legacy ioctl will continue working as before.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103080310.164453-3-tomi.valkeinen@ti.com
To support legacy gamma ioctls the drivers need to set
drm_crtc_funcs.gamma_set either to a custom implementation or to
drm_atomic_helper_legacy_gamma_set. Most of the atomic drivers do the
latter.
We can simplify this by making the core handle it automatically.
Move the drm_atomic_helper_legacy_gamma_set() functionality into
drm_color_mgmt.c to make drm_mode_gamma_set_ioctl() use
drm_crtc_funcs.gamma_set if set or GAMMA_LUT property if not.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-2-tomi.valkeinen@ti.com
Required backmerge since we will be based on top of v5.11, and there
has been a request to backmerge already to upstream some features.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
core:
- documentation updates
- deprecate DRM_FORMAT_MOD_NONE
- atomic crtc enable/disable rework
- GEM convert drivers to gem object functions
- remove SCATTER_LIST_MAX_SEGMENT
sched:
- avoid infinite waits
ttm:
- remove AGP support
- don't modify caching for swapout
- ttm pinning rework
- major TTM reworks
- new backend allocator
- multihop support
vram-helper:
- top down BO placement fix
- TTM changes
- GEM object support
displayport:
- DP 2.0 DPCD prep work
- DP MST extended DPCD caps
fbdev:
- mark as orphaned
amdgpu:
- Initial Vangogh support
- Green Sardine support
- Dimgrey Cavefish support
- SG display support for renoir
- SMU7 improvements
- gfx9+ modiifier support
- CI BACO fixes
radeon:
- expose voltage via hwmon on SUMO
amdkfd:
- fix unique id handling
i915:
- more DG1 enablement
- bigjoiner support
- integer scaling filter support
- async flip support
- ICL+ DSI command mode
- Improve display shutdown
- Display refactoring
- eLLC machine fbdev loading fix
- dma scatterlist fixes
- TGL hang fixes
- eLLC display buffer caching on SKL+
- MOCS PTE seeting for gen9+
msm:
- Shutdown hook
- GPU cooling device support
- DSI 7nm and 10nm phy/pll updates
- sm8150/sm2850 DPU support
- GEM locking re-work
- LLCC system cache support
aspeed:
- sysfs output config support
ast:
- LUT fix
- new display mode
gma500:
- remove 2d framebuffer accel
panfrost:
- move gpu reset to a worker
exynos:
- new HDMI mode support
mediatek:
- MT8167 support
- yaml bindings
- MIPI DSI phy code moved
etnaviv:
- new perf counter
- more lockdep annotation
hibmc:
- i2c DDC support
ingenic:
- pixel clock reset fix
- reserved memory support
- allow both DMA channels at once
- different pixel format support
- 30/24/8-bit palette modes
tilcdc:
- don't keep vblank irq enabled
vc4:
- new maintainer added
- DSI registration fix
virtio:
- blob resource support
- host visible and cross-device support
- uuid api support
-----BEGIN PGP SIGNATURE-----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=c9rl
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Not a huge amount of big things here, AMD has support for a few new HW
variants (vangogh, green sardine, dimgrey cavefish), Intel has some
more DG1 enablement. We have a few big reworks of the TTM layers and
interfaces, GEM and atomic internal API reworks cross tree. fbdev is
marked orphaned in here as well to reflect the current reality.
core:
- documentation updates
- deprecate DRM_FORMAT_MOD_NONE
- atomic crtc enable/disable rework
- GEM convert drivers to gem object functions
- remove SCATTER_LIST_MAX_SEGMENT
sched:
- avoid infinite waits
ttm:
- remove AGP support
- don't modify caching for swapout
- ttm pinning rework
- major TTM reworks
- new backend allocator
- multihop support
vram-helper:
- top down BO placement fix
- TTM changes
- GEM object support
displayport:
- DP 2.0 DPCD prep work
- DP MST extended DPCD caps
fbdev:
- mark as orphaned
amdgpu:
- Initial Vangogh support
- Green Sardine support
- Dimgrey Cavefish support
- SG display support for renoir
- SMU7 improvements
- gfx9+ modiifier support
- CI BACO fixes
radeon:
- expose voltage via hwmon on SUMO
amdkfd:
- fix unique id handling
i915:
- more DG1 enablement
- bigjoiner support
- integer scaling filter support
- async flip support
- ICL+ DSI command mode
- Improve display shutdown
- Display refactoring
- eLLC machine fbdev loading fix
- dma scatterlist fixes
- TGL hang fixes
- eLLC display buffer caching on SKL+
- MOCS PTE seeting for gen9+
msm:
- Shutdown hook
- GPU cooling device support
- DSI 7nm and 10nm phy/pll updates
- sm8150/sm2850 DPU support
- GEM locking re-work
- LLCC system cache support
aspeed:
- sysfs output config support
ast:
- LUT fix
- new display mode
gma500:
- remove 2d framebuffer accel
panfrost:
- move gpu reset to a worker
exynos:
- new HDMI mode support
mediatek:
- MT8167 support
- yaml bindings
- MIPI DSI phy code moved
etnaviv:
- new perf counter
- more lockdep annotation
hibmc:
- i2c DDC support
ingenic:
- pixel clock reset fix
- reserved memory support
- allow both DMA channels at once
- different pixel format support
- 30/24/8-bit palette modes
tilcdc:
- don't keep vblank irq enabled
vc4:
- new maintainer added
- DSI registration fix
virtio:
- blob resource support
- host visible and cross-device support
- uuid api support"
* tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm: (1754 commits)
drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs
drm/amdgpu: fix size calculation with stolen vga memory
drm/amdgpu: remove amdgpu_ttm_late_init and amdgpu_bo_late_init
drm/amdgpu: free the pre-OS console framebuffer after the first modeset
drm/amdgpu: enable runtime pm using BACO on CI dGPUs
drm/amdgpu/cik: enable BACO reset on Bonaire
drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven
drm/amd/pm: remove one unsupported smu function for vangogh
drm/amd/display: setup system context for APUs
drm/amd/display: add S/G support for Vangogh
drm/amdkfd: Fix leak in dmabuf import
drm/amdgpu: use AMDGPU_NUM_VMID when possible
drm/amdgpu: fix sdma instance fw version and feature version init
drm/amd/pm: update driver if version for dimgrey_cavefish
drm/amd/display: 3.2.115
drm/amd/display: [FW Promotion] Release 0.0.45
drm/amd/display: Revert DCN2.1 dram_clock_change_latency update
drm/amd/display: Enable gpu_vm_support for dcn3.01
drm/amd/display: Fixed the audio noise during mode switching with HDCP mode on
drm/amd/display: Add wm table for Renoir
...
Mapping the imported pages of a DMA-buf into an userspace process
doesn't work as expected.
But we have reoccurring requests on this approach, so split the
functions for this and document that dma_buf_mmap() needs to be used
instead.
v2: split it into two functions
v3: rebased on latest changes
v4: update commit message a bit
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/403838/
When the SDI output was converted to DRM bridge, the atomic versions of
enable and disable funcs were used. This was not intended, as that would
require implementing other atomic funcs too. This leads to:
WARNING: CPU: 0 PID: 18 at drivers/gpu/drm/drm_bridge.c:708 drm_atomic_helper_commit_modeset_enables+0x134/0x268
and display not working.
Fix this by using the legacy enable/disable funcs.
Fixes: 8bef8a6d5d ("drm/omap: sdi: Register a drm_bridge")
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org # v5.7+
Link: https://patchwork.freedesktop.org/patch/msgid/20201127085241.848461-1-tomi.valkeinen@ti.com
Add the new vma_set_file() function to allow changing
vma->vm_file with the necessary refcount dance.
v2: add more users of this.
v3: add missing EXPORT_SYMBOL, rebase on mmap cleanup,
add comments why we drop the reference on two occasions.
v4: make it clear that changing an anonymous vma is illegal.
v5: move vma_set_file to mm/util.c
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2)
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://patchwork.freedesktop.org/patch/399360/
pm_runtime_get_sync() increments the runtime PM usage counter
even when it returns an error code. However, users of its
direct wrappers in omapdrm assume that PM usage counter will
not change on error. Thus a pairing decrement is needed on
the error handling path for these wrappers to keep the counter
balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200822065743.13671-1-dinghao.liu@zju.edu.cn
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713122859.34135-1-grandmaster@al2klimov.de
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/omapdrm/dss/dsi.c: In function ‘_dsi_print_reset_status’:
drivers/gpu/drm/omapdrm/dss/dsi.c:1131:6: warning: variable ‘l’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/omapdrm/dss/dsi.c: In function ‘dsi_update’:
drivers/gpu/drm/omapdrm/dss/dsi.c:3943:10: warning: variable ‘dh’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/omapdrm/dss/dsi.c:3943:6: warning: variable ‘dw’ set but not used [-Wunused-but-set-variable]
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105144517.1826692-9-lee.jones@linaro.org
The API has been updated, but the header was not.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Function parameter or member 'crtc' not described in 'omap_irq_enable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Excess function parameter 'dev' description in 'omap_irq_enable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Excess function parameter 'pipe' description in 'omap_irq_enable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Function parameter or member 'crtc' not described in 'omap_irq_disable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Excess function parameter 'dev' description in 'omap_irq_disable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Excess function parameter 'pipe' description in 'omap_irq_disable_vblank'
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <rob.clark@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105144517.1826692-5-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:313: warning: Function parameter or member 'dmm' not described in 'dmm_txn_init'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:313: warning: Function parameter or member 'tcm' not described in 'dmm_txn_init'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'txn' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'area' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'pages' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'npages' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'roll' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:399: warning: Function parameter or member 'txn' not described in 'dmm_txn_commit'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:399: warning: Function parameter or member 'wait' not described in 'dmm_txn_commit'
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <rob@ti.com>
Cc: Andy Gross <andy.gross@ti.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106214949.2042120-10-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/omapdrm/omap_gem.c:593: warning: Function parameter or member 'file' not described in 'omap_gem_dumb_create'
drivers/gpu/drm/omapdrm/omap_gem.c:593: warning: Excess function parameter 'drm_file' description in 'omap_gem_dumb_create'
drivers/gpu/drm/omapdrm/omap_gem.c:619: warning: Function parameter or member 'offset' not described in 'omap_gem_dumb_map_offset'
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Rob Clark <rob.clark@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106214949.2042120-9-lee.jones@linaro.org
Only the following drivers aren't converted:
- amdgpu, because of the driver_feature mangling due to virt support.
Subsequent patch will address this.
- nouveau, because DRIVER_ATOMIC uapi is still not the default on the
platforms where it's supported (i.e. again driver_feature mangling)
- vc4, again because of driver_feature mangling
- qxl, because the ioctl table is somewhere else and moving that is
maybe a bit too much, hence the num_ioctls assignment prevents a
const driver structure.
- arcpgu, because that is stuck behind a pending tiny-fication series
from me.
- legacy drivers, because legacy requires non-const drm_driver.
Note that for armada I also went ahead and made the ioctl array const.
Only cc'ing the driver people who've not been converted (everyone else
is way too much).
v2: Fix one misplaced const static, should be static const (0day)
v3:
- Improve commit message (Sam)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: kernel test robot <lkp@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
The kernel test robot is not happy with that.
This reverts commit 2b5b95b1ff.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/394773/
Add the new vma_set_file() function to allow changing
vma->vm_file with the necessary refcount dance.
v2: add more users of this.
v3: add missing EXPORT_SYMBOL, rebase on mmap cleanup,
add comments why we drop the reference on two occasions.
v4: make it clear that changing an anonymous vma is illegal.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2)
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/394773/
