Add lock protection for 'ring->wptr'/'ring->rptr' to ensure the correct execution.
Fixes: 8652920d2c ("drm/amdgpu: add mutex lock for cper ring")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Fix the comment style before cntl_stuck_hw_workaround() by replacing
'/**' with '/*' since it is not a kdoc comment.
Fixes the below with gcc W=1:
display/dc/dce/dce_i2c_hw.c:380: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* If we boot without an HDMI display, the I2C engine does not get
initialized
Fixes: 04d57f4462 ("drm/amd/display: Workaround for stuck I2C arbitrage")
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Dominik Kaszewski <dominik.kaszewski@amd.com>
Cc: Ivan Lipski <ivan.lipski@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DIV_ROUND_CLOSEST(x, 100) returns either 0 or 1 if 0<x<=100, so the
division needs to be performed after the multiplication and not the
other way around, to properly scale the value.
Fixes: 8b5f3a229a ("drm/amd/display: Fix default DC and AC levels")
Signed-off-by: Lauri Tirkkonen <lauri@hacktheplanet.fi>
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/aH2Q_HJvxKbW74vU@hacktheplanet.fi
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If vm belongs to another process, this is fclose after fork,
wait may enable signaling KFD eviction fence and cause parent process queue evicted.
[677852.634569] amdkfd_fence_enable_signaling+0x56/0x70 [amdgpu]
[677852.634814] __dma_fence_enable_signaling+0x3e/0xe0
[677852.634820] dma_fence_wait_timeout+0x3a/0x140
[677852.634825] amddma_resv_wait_timeout+0x7f/0xf0 [amdkcl]
[677852.634831] amdgpu_vm_wait_idle+0x2d/0x60 [amdgpu]
[677852.635026] amdgpu_flush+0x34/0x50 [amdgpu]
[677852.635208] filp_flush+0x38/0x90
[677852.635213] filp_close+0x14/0x30
[677852.635216] do_close_on_exec+0xdd/0x130
[677852.635221] begin_new_exec+0x1da/0x490
[677852.635225] load_elf_binary+0x307/0xea0
[677852.635231] ? srso_alias_return_thunk+0x5/0xfbef5
[677852.635235] ? ima_bprm_check+0xa2/0xd0
[677852.635240] search_binary_handler+0xda/0x260
[677852.635245] exec_binprm+0x58/0x1a0
[677852.635249] bprm_execve.part.0+0x16f/0x210
[677852.635254] bprm_execve+0x45/0x80
[677852.635257] do_execveat_common.isra.0+0x190/0x200
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gang Ba <Gang.Ba@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Used to to set the MQD appropriately for each queue type.
Kernel queues have additional privileges.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.16.x
HUBBUB structure is not initialized on DCE hardware, so check if it is NULL
to avoid null dereference while accessing amdgpu_dm_capabilities file in
debugfs.
Signed-off-by: Peter Shkenev <mustela@erminea.space>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
After a recent change in clang to expose uninitialized warnings from
const variables and pointers [1], there is a warning in
imu_v12_0_program_rlc_ram() because data is passed uninitialized to
program_imu_rlc_ram():
drivers/gpu/drm/amd/amdgpu/imu_v12_0.c:374:30: error: variable 'data' is uninitialized when used here [-Werror,-Wuninitialized]
374 | program_imu_rlc_ram(adev, data, (const u32)size);
| ^~~~
As this warning happens early in clang's frontend, it does not realize
that due to the assignment of r to -EINVAL, program_imu_rlc_ram() is
never actually called, and even if it were, data would not be
dereferenced because size is 0.
Just initialize data to NULL to silence the warning, as the commit that
added program_imu_rlc_ram() mentioned it would eventually be used over
the old method, at which point data can be properly initialized and
used.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2107
Fixes: 56159fffaa ("drm/amdgpu: use new method to program rlc ram")
Link: 2464313eef [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
If the debug option is set to disable_dsc the max slice width and/or
dispclk can be zero. This causes a divide by zero when calculating the
min ODM combine factor. Add a check to ensure they are valid first.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
drm-misc-fixes for v6.16-rc8/final?:
- Revert all uses of drm_gem_object->dmabuf to
drm_gem_object->import_attach->dmabuf.
- Fix amdgpu returning BIOS cluttered VRAM after resume.
- Scheduler hang fix.
- Revert nouveau ioctl fix as it caused regressions.
- Fix null pointer deref in nouveau.
- Fix unnecessary semicolon in ti_sn_bridge_probe.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/72235afd-c849-49fe-9cc1-2b1781abdf08@linux.intel.com
Rather than checking in the callbacks, check if the reset
type is supported in the caller.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Drop the soft_recovery callbacks as the queue reset replaces
it.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Drop the soft_recovery callbacks as the queue reset replaces
it.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Drop the soft_recovery callbacks as the queue reset replaces
it.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the dirty bit when the memory resource is not cleared
during BO release.
v2(Christian):
- Drop the cleared flag set to false.
- Improve the amdgpu_vram_mgr_set_clear_state() function.
v3:
- Add back the resource clear flag set function call after
being cleared during eviction (Christian).
- Modified the patch subject name.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cached metrics data validity is 1ms on SMUv13.0.6 SOCs. It's not
reasonable for any client to query gpu_metrics at a faster rate and
constantly interrupt PMFW.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If dpm tables are already populated on SMU v13.0.6 SOCs, use the cached
data. Otherwise, fetch values from firmware.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 42cdf6f687 ("drm/amdgpu/gfx8: always restore kcq MQDs") made the
ring pointer always to be reset on resume from suspend. This caused compute
rings to fail since the reset was done without also resetting it for the
firmware. Reset wptr on the GPU to avoid a disconnect between the driver
and firmware wptr.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3911
Fixes: 42cdf6f687 ("drm/amdgpu/gfx8: always restore kcq MQDs")
Signed-off-by: Eeli Haapalainen <eeli.haapalainen@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2becafc319)
Cc: stable@vger.kernel.org
Increment the reset counter only if soft recovery succeeded. This is
consistent with a ring hard reset behaviour where counter gets
incremented only if hard reset succeeded.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 25c314aa3e)
Cc: stable@vger.kernel.org
In DCN401 pre-blending degamma LUT isn't affecting cursor as in previous
DCN version. As this is not the behavior close to what is expected for
CRTC degamma LUT, disable CRTC degamma LUT property in this HW.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4176
---
When enabling HDR on KDE, it takes the first CRTC 1D LUT available and
apply a color transformation (Gamma 2.2 -> PQ). AMD driver usually
advertises a CRTC degamma LUT as the first CRTC 1D LUT, but it's
actually applied pre-blending. In previous HW version, it seems to work
fine because the 1D LUT was applied to cursor too, but DCN401 presents a
different behavior and the 1D LUT isn't affecting the hardware cursor.
To address the wrong gamma on cursor with HDR (see the link), I came up
with this patch that disables CRTC degamma LUT in this hw, since it
presents a different behavior than others. With this KDE sees CRTC
regamma LUT as the first post-blending 1D LUT available. This is
actually more consistent with AMD color pipeline. It was tested by the
reporter, since I don't have the HW available for local testing and
debugging.
Melissa
---
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 340231cdce)
Cc: stable@vger.kernel.org
The term "HQD" is CP-specific and doesn't
accurately describe the queue resources for other IP blocks like SDMA,
VCN, or VPE. This change:
1. Renames `num_hqds` to `num_slots` in amdgpu_kms.c to better reflect
the generic nature of the resource counting
2. Updates the UAPI struct member from `userq_num_hqds` to `userq_num_slots`
3. Maintains the same functionality while using more appropriate terminology
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change exposes the number of available user queue instances
for each hardware IP type (GFX, COMPUTE, SDMA) through the
drm_amdgpu_info_hw_ip interface.
Key changes:
1. Added userq_num_instance field to drm_amdgpu_info_hw_ip structure
2. Implemented counting of available HQD slots using:
- mes.gfx_hqd_mask for GFX queues
- mes.compute_hqd_mask for COMPUTE queues
- mes.sdma_hqd_mask for SDMA queues
3. Only counts available instances when user queues are enabled
(!disable_uq)
v2: using the adev->mes.gfx_hqd_mask[]/compute_hqd_mask[]/sdma_hqd_mask[] masks
to determine the number of queue slots available for each engine type (Alex)
v3: rename userq_num_instance to userq_num_hqds (Alex)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Accessing amdgpu internal data structures "struct amdgpu_device"
and "struct amdgpu_bo" in ISP V4L2 driver to alloc/free GART
buffers is not recommended.
Add new amdgpu_isp helper functions that takes opaque params
from ISP V4L2 driver and calls the amdgpu internal functions
amdgpu_bo_create_isp_user() and amdgpu_bo_create_kernel() to
alloc/free GART buffers.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create amd_isp_capture MFD device with swnode initialized to
isp specific software_node part of fwnode graph in amd_isp4
x86/platform driver. The isp driver use this swnode handle
to retrieve the critical properties (data-lanes, mipi phyid,
link-frequencies etc.) required for camera to work on AMD ISP4
based targets.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 42cdf6f687 ("drm/amdgpu/gfx8: always restore kcq MQDs") made the
ring pointer always to be reset on resume from suspend. This caused compute
rings to fail since the reset was done without also resetting it for the
firmware. Reset wptr on the GPU to avoid a disconnect between the driver
and firmware wptr.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3911
Fixes: 42cdf6f687 ("drm/amdgpu/gfx8: always restore kcq MQDs")
Signed-off-by: Eeli Haapalainen <eeli.haapalainen@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Writing a string without delimiters (' ', '\n', '\0') to the under
gpu_od/fan_ctrl sysfs or pp_power_profile_mode for the CUSTOM profile
will result in a null pointer dereference.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4401
Signed-off-by: Umio Yasuno <coelacanth_dream@protonmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the handling consistent with other IPs and across
JPEG versions.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid using the mapping here.
v2: use amdgpu_xgmi_same_hive() as suggested by Felix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the new helpers to handle engine resets for VCN.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the new helpers to handle engine resets for VCN.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the new helpers to handle engine resets for VCN.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With engine resets we reset all queues on the engine rather
than just a single queue. Add a framework to handle this
similar to SDMA.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add queue reset support for jpeg 5.0.0.
Use the new helpers to re-emit the unprocessed state
after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add queue reset support for jpeg 4.0.5.
Use the new helpers to re-emit the unprocessed state
after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-emit the unprocessed state after resetting the queue.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unnecessary variable ret from smu_v13_0_12_get_smu_metrics_data
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507150618.WOfvWsQF-lkp@intel.com
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Increment the reset counter only if soft recovery succeeded. This is
consistent with a ring hard reset behaviour where counter gets
incremented only if hard reset succeeded.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMFW interface to get max/min frequencies is not available on aldebaran
VFs. Use data, if available, in DPM tables to get the max/min
frequencies.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For kernel compute queues, align the timeout with
other kernel queues (10 sec). This had previously
been set higher for OpenCL when it used kernel
queues, but now OpenCL uses KFD user queues which
don't have a timeout limitation. This also aligns
with SR-IOV which already used a shorter timeout.
Additionally the longer timeout negatively impacts
the user experience with kernel queues for interactive
applications.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On SRIOV environments, check if RLCG supports
SQ_CONFIG register programming.
Signed-off-by: Tony Yi <Tony.Yi@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to know the wptr and sequence number associated
with a fence so that we can re-emit the unprocessed state
after a ring reset. Pre-allocate storage space for
the ring buffer contents and add helpers to save off
and re-emit the unprocessed state so that it can be
re-emitted after the queue is reset.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make them consistent and use the reset flags.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make them consistent and use the reset flags.
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Power control is only available in bare metal. SR-IOV
will need a different method.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Start and stop can fail, so add checks.
Fixes: 74894ffc7d ("drm/amdgpu: Add ring reset callback for JPEG4_0_0")
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Start and stop can fail, so add checks.
Fixes: 03399d0bff ("drm/amdgpu: Add ring reset callback for JPEG3_0_0")
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Start and stop can fail, so add checks.
Fixes: 500c04d2a7 ("drm/amdgpu: Add ring reset callback for JPEG2_0_0")
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Make them consistent and drop unneeded extra variables.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If kasprintf() fails, some mutex still need to be released to avoid locking
issue, as already done in all other error handling path.
Fixes: c03ea34cbf ("drm/amdgpu: add support of debugfs for mqd information")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/all/366557fa7ca8173fd78c58336986ca56953369b9.1752087753.git.christophe.jaillet@wanadoo.fr/
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Decouple .get_format_info() from struct drm_mode_fb_cmd2 and just
pass the pixel format+modifier combo in by hand.
We may want to use .get_format_info() outside of the normal
addfb paths where we won't have a struct drm_mode_fb_cmd2, and
creating a temporary one just for this seems silly.
v2: Fix intel_fb_get_format_info() docs (Laurent)
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <siqueira@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-2-ville.syrjala@linux.intel.com
- Added a handler in DRM buddy manager to reset the cleared
flag for the blocks in the freelist.
- This is necessary because, upon resuming, the VRAM becomes
cluttered with BIOS data, yet the VRAM backend manager
believes that everything has been cleared.
v2:
- Add lock before accessing drm_buddy_clear_reset_blocks()(Matthew Auld)
- Force merge the two dirty blocks.(Matthew Auld)
- Add a new unit test case for this issue.(Matthew Auld)
- Having this function being able to flip the state either way would be
good. (Matthew Brost)
v3(Matthew Auld):
- Do merge step first to avoid the use of extra reset flag.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: stable@vger.kernel.org
Fixes: a68c7eaa7a ("drm/amdgpu: Enable clear page functionality")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3812
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250716075125.240637-2-Arunpravin.PaneerSelvam@amd.com
when loading bad page in the same nps mode, need to set the other fields
fields in eeprom records manually besides retired_page
Signed-off-by: ganglxie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add eeprom data checksum check before driver unload. reset eeprom
and save correct data to eeprom when check failed
Signed-off-by: ganglxie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In DCN401 pre-blending degamma LUT isn't affecting cursor as in previous
DCN version. As this is not the behavior close to what is expected for
CRTC degamma LUT, disable CRTC degamma LUT property in this HW.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4176
---
When enabling HDR on KDE, it takes the first CRTC 1D LUT available and
apply a color transformation (Gamma 2.2 -> PQ). AMD driver usually
advertises a CRTC degamma LUT as the first CRTC 1D LUT, but it's
actually applied pre-blending. In previous HW version, it seems to work
fine because the 1D LUT was applied to cursor too, but DCN401 presents a
different behavior and the 1D LUT isn't affecting the hardware cursor.
To address the wrong gamma on cursor with HDR (see the link), I came up
with this patch that disables CRTC degamma LUT in this hw, since it
presents a different behavior than others. With this KDE sees CRTC
regamma LUT as the first post-blending 1D LUT available. This is
actually more consistent with AMD color pipeline. It was tested by the
reporter, since I don't have the HW available for local testing and
debugging.
Melissa
---
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 99e25e4683.
[Why & How]
This commit caused a blank screen on internal display when projecting to
an external display on DCN314.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SmartMux is a mechanism to switch the GPU being used for scanout in a
hybrid configuration. This is used for devices with an eDP and two GPUs.
This is only valid when the system has a physical switch (Multiplexer)
in the board to switch between the two GPUs.
When a graphically intensive workload like a game is being run, the
system can be switch the active display to the dGPU, so that we can
avoid copying the buffer from dGPU to APU for scanout. This helps with
latency and FPS. When power consumption is preferred, the system can be
switched to the APU.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
UHBR link rate capable eDPs will use HPO for encoding. Need to pass
HPO stream and link encoder instances to DMCUB for Replay FSM to
know which instances to use.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
DP1 eDP is still considered a single-eDP case and should support Panel Replay.
Modify secondary eDP policy to reflect this and update Replay state accordingly.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
For SQ128 pattern some vendor-specific overrides are required.
Previously a hardcoded clock gen source value was incorrectly programmed,
causing our override to retimer's clock source override to be ignored.
Due to some PHY issues on certain APU programs, we see failures on retimer
bypass ports extend to electrical testing downstream of PHY due to some host
clock jitter which the retimer follows.
[HOW]
Fix typo to use correct clock gen source override of 0xC4 rather than 0x4C.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
To facilitate debugging, the following behaviors are defined for existing
debug option disable_ips_in_vpb
0 - Enable IPS in LVP - let driver decide (legacy)
1 - Disable IPS in LVP
2 - Enable IPS1 and RCG in LVP
3 - Enable IPS1 Z8, IPS1 and RCG in LVP
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add static pg implementations and debug flags for future use.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DMUB shall be notified on driver hardware
release. Implement notification.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Duncan Ma <Duncan.Ma@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Aligned IPS FW state with DMCUB IPS FW state
Added debug option disable_ips_rcg to modify RCG behaviour in IPS modes.
Updated existing debug option disable_ips to align with new changes introduced by IPSv2.0
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Display idle notification shall
be sent by driver on D3 entry. Implement
notification to DMUB and PMFW.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Duncan Ma <Duncan.Ma@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
dc has some code out of sync:
dc_commit_updates_for_stream handles v1/v2/v3,
but dc_update_planes_and_stream makes v1 asic to use v2.
as a reression fix: limit clear_update_flags to dcn32 or newer asic.
need to follow up that v1 asic using v2 issue.
Reviewed-by: Syed Hassan <syed.hassan@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Some monitor have audio output but SAB data is zero. Skip
check this in this case.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Fudongwang <Fudong.Wang@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Add the timing source needed to support DID Type5.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DSC block level should only be responsible for reporting single DSC
instance capabilities. Factoring in ODM combine requirements should be
handled in dc_dsc.c. Both components should acquire clocks from clk_mgr
to determine throughput capabilities instead of relying on hard coded
values as these can differ by SoC and SKU.
[HOW]
1) Add dsc_get_single_enc_caps to acquire single DSC instance
capabilities (replacing dsc_get_enc_caps), factoring in DSCCLK
2) add build_dsc_enc_caps to combine single DSC instance capabilities
3) account for max pixel rate per pipe (DISPCLK) when calculating
minimum slice count
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Expose dcn401_initialize_min_clocks() for future use and add additional
check for IP register.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When booting without an HDMI display connected, the I2C registers
are not initialized correctly, leading to DC_I2C_ARBITRATION register
getting stuck with DC_I2C_REG_RW_CNTL_STATUS == USED_BY_SW.
[How]
* Correct TOCTOU race condition in engine acquire logic which did not
check against DMUB trying to acquire it at the same time.
* Deassert SOFT_RESET before acquire, as it can block access to other
I2C registers.
* Add a workaround in release, checking that after triggerring
DC_I2C_SW_DONE_USING_I2C_REG, DC_I2C_REG_RW_CNTL_STATUS != USED_BY_SW.
If necessary, trigger DC_I2C_SW_DONE_USING_I2C_REG again.
* Remove unnecessary clear of DC_I2C_SW_USE_I2C_REG_REQ, which engine
ignores according to specification.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the driver is unloaded, the interrupt source of
the rma device is not released, resulting in the failure
of hw_init when loading again using bad_page_threshold.
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KFD has been confirmed that can run on LoongArch systems.
It's necessary to support CONFIG_HSA_AMD on LoongArch.
Signed-off-by: Han Gao <rabenda.cn@gmail.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Start and stop can fail, so add checks.
Fixes: b54695dae9 ("drm/amd: Add per-ring reset for vcn v5.0.0 use")
Reviewed-by: Mario Limonciello <mari.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Start and stop can fail, so add checks.
Fixes: d1a46cdd00 ("drm/amd: Add per-ring reset for vcn v4.0.5 use")
Reviewed-by: Mario Limonciello <mari.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Start and stop can fail, so add checks.
Fixes: b8b6e6f165 ("drm/amd: Add per-ring reset for vcn v4.0.0 use")
Reviewed-by: Mario Limonciello <mari.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
The ring test needs to be inside the lock.
Fixes: 097af47d3c ("drm/amdgpu/gfx10: wait for reset done before remap")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Jiadong Zhu <Jiadong.Zhu@amd.com>
The ring test needs to be inside the lock.
Fixes: 4c953e53cc ("drm/amdgpu/gfx_9.4.3: wait for reset done before remap")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Jiadong Zhu <Jiadong.Zhu@amd.com>
The ring test needs to be inside the lock.
Fixes: fdbd69486b ("drm/amdgpu/gfx9: wait for reset done before remap")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Jiadong Zhu <Jiadong.Zhu@amd.com>
