The complexity of config guards needed for ACPI_PTR() is not worthwhile
for the small amount of saved data. This example was doing it correctly
but I am proposing dropping this so as to reduce chance of cut and paste
where it is done wrong.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241018134550.2071101-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There are three definitions for the property names. Remove them as:
1) each of them is only used once;
2) in all cases the definition is longer than the value.
In the result code is better and grepping on the property immediately
gets the function in which is being used which helps to guess the type
of the value.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241018134550.2071101-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
debounce_setup() stores the debounce_period_us if the driver supports
debounce, but the debounce_period_us is also stored where debounce_setup()
is called, independent of whether the debounce is being perfomed by
hardware or software.
Remove the redundant storing of the debounce_period_us in
debounce_setup().
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241020115238.170994-1-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We currently only notify user-space about line config changes that are
made from user-space. Any kernel config changes are not signalled.
Let's improve the situation by emitting the events closer to the source.
To that end let's call the relevant notifier chain from the functions
setting direction, gpiod_set_config(), gpiod_set_consumer_name() and
gpiod_toggle_active_low(). This covers all the options that we can
inform the user-space about. We ignore events which don't have
corresponding flags exported to user-space on purpose - otherwise the
user would see a config-changed event but the associated line-info would
remain unchanged.
gpiod_direction_output/input() can be called from any context.
Fortunately, we now emit line state events using an atomic notifier
chain, so it's no longer an issue.
Let's also add non-notifying wrappers around the direction setters in
order to not emit superfluous reconfigure events when requesting the
lines as the initial config should be part of the request notification.
Use gpio_do_set_config() instead of gpiod_set_debounce() for configuring
debouncing via hardware from the character device code to avoid multiple
reconfigure events.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-8-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
With everything else ready, we can now switch to using the atomic
notifier for line state events which will allow us to notify user-space
about direction changes from atomic context.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-7-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In order to allow line state notifications to be emitted from atomic
context (for instance: from gpiod_direction_input/output()), we must
stop calling any sleeping functions in lineinfo_changed_notify(). To
that end let's use the new workqueue.
Let's atomically allocate small structures containing the required data
and fill it with information immediately upon being notified about the
change except for the pinctrl state which will be retrieved later from
process context. We can pretty reliably do this as pin functions are
typically set once per boot.
Let's make sure to bump the reference count of GPIO device and the GPIO
character device file descriptor to keep both alive until the event was
queued.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-6-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In order to prepare the line state notification mechanism for working in
atomic context as well, add a dedicated, high-priority, ordered
workqueue to GPIO device which will be used to queue the events fron any
context for them to be emitted always in process context.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-5-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In order to prepare gpio_desc_to_lineinfo() to being called from atomic
context, add a new argument - bool atomic - which, if set, indicates
that no sleeping functions must be called (currently: only
pinctrl_gpio_can_use_line()).
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-4-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This effectively reverts commits 9344e34e79 ("gpiolib: cdev: relocate
debounce_period_us from struct gpio_desc") and d8543cbaf9 ("gpiolib:
remove debounce_period_us from struct gpio_desc") and goes back to
storing the debounce period in microseconds in the GPIO descriptor
We're doing it in preparation for notifying the user-space about
in-kernel line config changes.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-3-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We don't need to guard the GPIO chip until its first dereference in
gpio_do_set_config().
First: change the prototype of gpio_do_set_config() to take the GPIO
line descriptor as argument, then move the gpio_chip protection into it
and drop it in two places where it's done too early.
This has the added benefit of making gpio_go_set_config() safe to use
from outside of this compilation unit without taking the gdev SRCU read
lock and will come in handy when we'll want to make it available to the
character device code.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-2-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We notify user-space about lines being requested from user-space or by
drivers calling gpiod_get() but not when drivers request their own lines
so add the missing call to gpiod_line_state_notify().
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241018-gpio-notify-in-kernel-events-v5-1-c79135e58a1c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use managed variants of gpiochip_add_data() and mutex_init() to drop a
label and lose a couple LOC.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241017121447.73754-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use devm_clk_get_enabled() to drop the goto label from probe() and the
entire remove() callback. Drop platform_set_drvdata() as it's no longer
needed. Drop log noise on success.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241017123044.75531-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use managed helpers to drop the goto label from probe() and shrink the
remove() callback.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241017150835.105676-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/gpio/ to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241016152435.38149-2-u.kleine-koenig@baylibre.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use devres to drop all goto labels from probe() and remove the driver
remove() callback. While at it: drop the unnecessary dev_info() message
as not only should the driver be quiet when successful, the message is
also wrong: the device was probed at this point, the driver had been
registered earlier.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241014092227.78886-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use the managed variant of gpiochip_add_data() and remove the remove()
callback.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241014092909.90607-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The 'if !EXPERT' bit will work fine if it follows the 'bool "foobar"'
declaration. No need to have separate entries for it.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241014110707.101320-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
All class functions used here take a const pointer to the class
structure. We can constify gpio_class.
While at it: remove a stray newline and use a tab in the struct
definition for consistency with the line above.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241014121831.106532-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Destroying the mutexes is done at the end of remove() so switching to
devres does not constitute a functional change. Use devm_mutex_init()
and remove repetitions of mutex_destroy().
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241008162416.85111-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver doesn't need to include of.h and use OF-specific interfaces.
Use generic property helpers instead.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241009162910.33477-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Instead of repeatedly dereferencing pdev, just store the address of the
embedded struct device in a local variable and use it instead for
improved readability.
While at it: rearrange variable declarations.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241009162910.33477-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There's no need to use the OF-specific variant to get the match data.
Switch to using device_get_match_data() and with that remove the of.h
include. Also remove of_irq.h as none of its interfaces is used here and
order the includes in alphabetical order.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241007102549.34926-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There's no need to use the OF-specific variant to get the match data.
Switch to using device_get_match_data() instead.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241007102859.35602-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
OF-specific routines should not be used unless necessary. Generic device
properties are preferred so switch to using them in the driver code.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241007103440.38416-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Make it possible to build the module when COMPILE_TEST is enabled for
better build coverage. Stop using of_match_ptr() to avoid build warnings.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241007103440.38416-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There's no reason to use OF-specific variants of property getters.
Switch to using the preferred, generic device property helpers.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241007104052.39374-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver doesn't really depend on interfaces from OF_GPIO so the
Kconfig dependency can be dropped.
Suggested-by: Uwe Kleine-König <ukleinek@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Link: https://lore.kernel.org/r/20241008081555.23465-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
FTDI FT2232H is a USB to GPIO chip. Sealevel produces some devices
with this chip. FT2232H presents itself as a composite device with two
interfaces (each is an "MPSSE"). Each MPSSE has two banks (high and low)
of 8 GPIO each. I believe some MPSSE's have only one bank, but I don't
know how to identify them (I don't have any for testing) and as a result
are unsupported for the time being.
Additionally, this driver provides software polling-based interrupts for
edge detection. For the Sealevel device I have to test with, this works
well because there is hardware debouncing. From talking to Sealevel's
people, this is their preferred way to do edge detection.
Signed-off-by: Mary Strodl <mstrodl@csh.rit.edu>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241009131131.1618329-1-mstrodl@csh.rit.edu
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In the 7th generation of the SoC from Aspeed, the control logic of the
GPIO controller has been updated to support per-pin control. Each pin now
has its own 32-bit register, allowing for individual control of the pin's
value, direction, interrupt type, and other settings. The permission for
coprocessor access is supported by the hardware but hasn't been
implemented in the current patch.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20241008081450.1490955-8-billy_tsai@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add low-level operations (llops) to abstract the register access for GPIO
registers and the coprocessor request/release. With this abstraction
layer, the driver can separate the hardware and software logic, making it
easier to extend the driver to support different hardware register
layouts.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> # AST2600
Link: https://lore.kernel.org/r/20241008081450.1490955-6-billy_tsai@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The bank array name is only used to determine if the GPIO offset is valid,
and this condition can be replaced by checking if the offset exceeds the
ngpio property.
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20241008081450.1490955-5-billy_tsai@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use module_platform_driver() to replace module_platform_driver_probe().
The former utilizes platform_driver_register(), which allows the driver to
defer probing when it doesn't acquire the necessary resources due to probe
order. In contrast, the latter uses __platform_driver_probe(), which
includes the comment "Note that this is incompatible with deferred
probing." Since our GPIO driver requires access to the clock resource, the
former is more suitable.
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20241008081450.1490955-4-billy_tsai@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-----BEGIN PGP SIGNATURE-----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=vhYn
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-i2c-watchdog-v6.13' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, GPIO, I2C and Watchdog due for the v6.13 merge window
Add gpio support for the Congatec Board Controller.
This Board Controller has 14 GPIO pins.
The driver is probed by the Congatec Board Controller MFD driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241001-congatec-board-controller-v3-2-39ceceed5c47@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Performing a dummy read ensures that the register write operation is fully
completed, mitigating any potential bus delays that could otherwise impact
the frequency of bitbang usage. E.g., if the JTAG application uses GPIO to
control the JTAG pins (TCK, TMS, TDI, TDO, and TRST), and the application
sets the TCK clock to 1 MHz, the GPIO's high/low transitions will rely on
a delay function to ensure the clock frequency does not exceed 1 MHz.
However, this can lead to rapid toggling of the GPIO because the write
operation is POSTed and does not wait for a bus acknowledgment.
Fixes: 361b79119a ("gpio: Add Aspeed driver")
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20241008081450.1490955-2-billy_tsai@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Make updating the descriptor flags when reconfiguring from user-space
consistent with the rest of the codebase: read the current state
atomically, update it according to user's instructions and write it back
atomically as well.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241004-gpio-notify-in-kernel-events-v1-3-8ac29e1df4fe@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We currently iterate over the descriptors owned by the GPIO device we're
adding twice with the first loop just setting the gdev pointer. It's not
used anywhere between this and the second loop so just drop the first
one and move the assignment to the second.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241004-gpio-notify-in-kernel-events-v1-2-8ac29e1df4fe@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We should only use v2 defines for line state change events. They will get
tranlated to v1 if needed by gpio_v2_line_info_changed_to_v1().
This isn't really a functional change as they have the same values but
let's do it for consistency.
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20241004-gpio-notify-in-kernel-events-v1-1-8ac29e1df4fe@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
OF-specific routines should not be used unless necessary. Generic device
properties are preferred so switch to using them in the driver code.
Acked-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240930144804.75068-3-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
For better readability don't repeatedly dereference pdev->dev but
instead store the address of the embedded struct device in a local
variable in probe().
Acked-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240930144804.75068-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver doesn't really depend on gpiolib-of being built and can be
compiled without it.
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240930144804.75068-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
OF-specific routines should not be used unless necessary. Generic device
properties are preferred so switch to using them in the driver code.
Link: https://lore.kernel.org/r/20240930091111.32010-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In `gpiod_get_label()`, it is possible that `srcu_dereference_check()` may
return a NULL pointer, leading to a scenario where `label->str` is accessed
without verifying if `label` itself is NULL.
This patch adds a proper NULL check for `label` before accessing
`label->str`. The check for `label->str != NULL` is removed because
`label->str` can never be NULL if `label` is not NULL.
This fixes the issue where the label name was being printed as `(efault)`
when dumping the sysfs GPIO file when `label == NULL`.
Fixes: 5a646e03e9 ("gpiolib: Return label, if set, for IRQ only line")
Fixes: a86d276930 ("gpiolib: fix the speed of descriptor label setting with SRCU")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20241003131351.472015-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The bitmap allocated in aggr_parse() is always freed before the function
returns so use __free(bitmap) to simplify it and drop the goto label.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240930163207.80276-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
For drivers or board files that set gpio_chip->names, the links to the
GPIO attribute group created on sysfs export will be named after the
line's name set in that array. For lines that are named using device
properties, the names pointer of the gpio_chip struct is never assigned
so they are exported as if they're not named.
The ABI documentation does not mention the former behavior and given
that the majority of modern systems use device-tree, ACPI or other way
of passing GPIO names using device properties - bypassing gc->names -
it's better to make the behavior consistent by always exporting lines as
"gpioXYZ".
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240930083029.17694-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Since commit d29e741cad ("gpio: davinci: drop platform data support"),
irqchip is no longer being registered on platforms what don't use
unbanked gpios. Fix this.
Reported-by: Sabeeh Khan <sabeeh-khan@ti.com>
Fixes: d29e741cad ("gpio: davinci: drop platform data support")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20241002071901.2752757-1-vigneshr@ti.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for a call to fwnode_handle_put() in the error path.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240928-gpio_device_for_each_child_node_scoped-v1-2-c20eff315f4f@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for a call to fwnode_handle_put() in the error path.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240928-gpio_device_for_each_child_node_scoped-v1-1-c20eff315f4f@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
On a few platforms such as TI's AM69 device, disable_irq() fails to keep
track of the interrupts that happen between disable_irq() and
enable_irq() and those interrupts are missed. Use the ->irq_unmask() and
->irq_mask() methods instead of ->irq_enable() and ->irq_disable() to
correctly keep track of edges when disable_irq is called.
This solves the issue of disable_irq() not working as expected on such
platforms.
Fixes: 23265442b0 ("ARM: davinci: irq_data conversion.")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
Acked-by: Keerthy <j-keerthy@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240828133207.493961-1-parth105105@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Switch to device_for_each_child_node_scoped() to simplify the code by
removing the need for a call to fwnode_handle_put() in the error path.
This also prevents possible memory leaks if new error paths are added
without the required call to fwnode_handle_put().
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Corrected minor typos in the GPIO TODO document:
- Fixed "ivolves" to "involves"
- Corrected "boardfiles" to "board files"
Signed-off-by: Shivam Chaudhary <cvam0000@gmail.com>
Link: https://lore.kernel.org/r/20240925154657.38704-1-cvam0000@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
With the change to cleanup.h guards, linereq_set_config_unlocked() was
collapsed into linereq_set_config(), but documentation referencing it
was not updated to reflect that change.
Update the reference to linereq_set_config().
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240924155624.230130-1-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
If we remove a GPIO chip that is also an interrupt controller with users
not having freed some interrupts, we'll end up leaking resources as
indicated by the following warning:
remove_proc_entry: removing non-empty directory 'irq/30', leaking at least 'gpio'
As there's no way of notifying interrupt users about the irqchip going
away and the interrupt subsystem is not plugged into the driver model and
so not all cases can be handled by devlinks, we need to make sure to free
all interrupts before the complete the removal of the provider.
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Tested-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20240919135104.3583-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This concludes a long journey towards replacing the old
board files with devictree description on the Cirrus Logic
EP93xx platform.
Nikita Shubin has been working on this for a long time,
for details see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmb1croACgkQYKtH/8kJ
UicY0g//XXEXcBgE2CLfKzGimN3gREIElEqFCpd7v32XWGIQNFdS7StiGqNx1MeU
UYdILm97ldgpx+NnHd3Cb9HbLQ1CTIIvAZ2ngFLDeeZO+wgzBVxWTrdUUp57ZIBn
5Fq0hNaR1bfqSr+J+ZbgizH5N96EvLr3OPz/eJetY7egVBUID/0OpwssPJxW1Ns0
f+W+yIc7BomVa71xGgI+RkHrG/5DSaoFtrB+ESt7q1nNUIeMn32JqBYqE0U2iCRN
ADO8I+WfAjIcO1uN5n3KM3tigZI3GKSrBdllByr8wWNbp9l5rMYfFAPEaI109iyI
7PFrB6qhAlY9LckXMNhwLyjlnWt6qrI0B+tyg+3tW6+4OwFnpPN0cIhszFPOmrhv
njsDSvybp0q9V6Mn7f394H6v9sk9RHr68mpu12hO65UBP7Qe7mrdl3snnFcm0FHL
jCLnvjdmCSqRlV6YFsKDHuDzZOG88sAwH0mySKd3c/CVvgaNDsaJduelPGpuXlXX
P7op6D8kyKFKfmwK0kz3t+3+2ozgYq3nu4amI7rJ72MOvJKBocTwwqpAesIuegde
bn3ZN30yZDTbfEFuveOAzx7rqDlZYX/tN0uspL4VBN0rdayxBng5hneV2PypTtW0
wE9ptz5qIz8AssJ7NInwpgRTDjEut4SY3m3CS2/66V08B4EznAA=
=Y3Cd
-----END PGP SIGNATURE-----
Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
Core GPIOLIB:
- provide and add users for a macro allowing to iterate over accepted
GPIO property names of consumer device nodes
- remove legacy definitions that are no longer used
- put legacy GPIO devres helpers together with the rest of the deprecated
code
- implement and use swnode_gpio_get_reference(): a wrapper simplifying
the underlying calls to fwnode_property_get_reference_args()
- use IS_ERR_OR_NULL() where it makes sense
- replace of_find_property() with of_property_present()
- simplify code with the scoped variant of OF-node children iterator
Documentation:
- update GPIO kerneldocs with Return sections
- fix "Excess struct member description" warnings now being triggered
with W=1
New drivers:
- add support for Analog Devices ADP5585
Driver improvements:
- add support for wake-on-GPIO to gpio-mpc8xxx
- use GPIO_LOOKUP_IDX() in gpio-virtuser
- use devm_clk_get_[optional_]enabled() where applicable in several
drivers
- replace OF-specific functions with provider-agnostic alternatives where
possible
- drop support for legacy platform data from gpio-ath79 and gpio-davinci
- refactor gpio-stmpe
- improve error reporting in gpio-pca953x
- add support for reading the direction of pins for some models to
gpio-vf610
DT bindings:
- convert the bindings for nxp,lpc3220 to YAML
- add gpio-reserved-ranges to gpio-davinci
- simplify the GPIO hog schema
- fix a GPIO hog issue in bindings for fcs,fxl6408
Other:
- fix format specifiers in user-space tools
- remove leftover files on make clean in tools/gpio/
-----BEGIN PGP SIGNATURE-----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=vVau
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"Core GPIOLIB:
- provide and add users for a macro allowing to iterate over accepted
GPIO property names of consumer device nodes
- remove legacy definitions that are no longer used
- put legacy GPIO devres helpers together with the rest of the
deprecated code
- implement and use swnode_gpio_get_reference(): a wrapper
simplifying the underlying calls to
fwnode_property_get_reference_args()
- use IS_ERR_OR_NULL() where it makes sense
- replace of_find_property() with of_property_present()
- simplify code with the scoped variant of OF-node children iterator
Documentation:
- update GPIO kerneldocs with Return sections
- fix "Excess struct member description" warnings now being triggered
with W=1
New drivers:
- add support for Analog Devices ADP5585
Driver improvements:
- add support for wake-on-GPIO to gpio-mpc8xxx
- use GPIO_LOOKUP_IDX() in gpio-virtuser
- use devm_clk_get_[optional_]enabled() where applicable in several
drivers
- replace OF-specific functions with provider-agnostic alternatives
where possible
- drop support for legacy platform data from gpio-ath79 and
gpio-davinci
- refactor gpio-stmpe
- improve error reporting in gpio-pca953x
- add support for reading the direction of pins for some models to
gpio-vf610
DT bindings:
- convert the bindings for nxp,lpc3220 to YAML
- add gpio-reserved-ranges to gpio-davinci
- simplify the GPIO hog schema
- fix a GPIO hog issue in bindings for fcs,fxl6408
Other:
- fix format specifiers in user-space tools
- remove leftover files on make clean in tools/gpio/"
* tag 'gpio-updates-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (54 commits)
gpio: mpc8xxx: switch to using DEFINE_RUNTIME_DEV_PM_OPS()
gpio: xilinx: Use helper function devm_clk_get_optional_enabled()
gpio: mb86s7x: Use helper function devm_clk_get_optional_enabled()
gpio: lpc18xx: Use helper function devm_clk_get_enabled()
gpio: cadence: Use helper function devm_clk_get_enabled()
gpio: sama5d2-piobu: convert comma to semicolon
gpio: mpc8xxx: order headers alphabetically
gpio: davinci: use devm_clk_get_enabled()
gpio: davinci: drop platform data support
gpio: stmpe: Sort headers
gpio: stmpe: Make use of device properties
gpio: stmpe: Utilise temporary variable for struct device
gpio: stmpe: Remove unused 'dev' member of struct stmpe_gpio
gpio: stmpe: Fix IRQ related error messages
gpio: pch: kerneldoc fixes for excess members
gpio: zynq: Simplify using devm_clk_get_enabled()
gpio: mpc8xxx: Add wake on GPIO support
gpio: syscon: fix excess struct member build warning
gpio: stp-xway: Simplify using devm_clk_get_enabled()
gpiolib: legacy: Consolidate devm_gpio_*() with other legacy APIs
...
This pull request contains some cleanups to the core and some mostly
minor updates to a bunch of drivers and device tree bindings. One thing
worth pointing out is that it contains an immutable branch containing
support for a new mfd chip (Analog Devices ADP5585) with several sub
drivers. So expect to get the four affected commits also from my fellow
MFD and GPIO maintainers.
Thanks go to Andrew Kreimer, Clark Wang, Conor Dooley, David Lechner,
Dmitry Rokosov, Frank Li, Geert Uytterhoeven, George Stark, Jiapeng
Chong, Krzysztof Kozlowski, Laurent Pinchart, Liao Chen, Liu Ying, Rob
Herring and Wolfram Sang for code contributions and reviews and to Lee
Jones for preparing the above mentioned immutable branch.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmboM3AACgkQj4D7WH0S
/k6IzQgAj+3B4F4UKPPI8jcQqRQGOWfjA365nIQmr1oeFYSGDILv4btU1TNV1MfH
WLXMRXLQb4dng21J8IwIJ/qyndL+GjRj3KWxLHJa3+/gxf8YuGwWJlNjlxtrGXM/
3JQ/aWqfgCf4KTRG3MoCTKc5fxtbHHWZ71kGdi6cchk1HggyBUH/7g85h/VkhCuc
JpOC7CvDVmzTkTIltCbiVJQ4xO3zmsV2WgnsWUzN+41PUjqJmMLmhKjI6UdAYWlI
B3qgCMXik153oYgaIw/BMtxFWa9e2ZxZ6hV+gx4tVQWbOtBPUxEqHpX2dt1fp5+h
7PQoKVWJycykdxmlOSGnjOl3RHVX5A==
=VjPD
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This contains some cleanups to the core and some mostly minor updates
to a bunch of drivers and device tree bindings. One thing worth
pointing out is that it contains an immutable branch containing
support for a new mfd chip (Analog Devices ADP5585) with several sub
drivers.
Thanks go to Andrew Kreimer, Clark Wang, Conor Dooley, David Lechner,
Dmitry Rokosov, Frank Li, Geert Uytterhoeven, George Stark, Jiapeng
Chong, Krzysztof Kozlowski, Laurent Pinchart, Liao Chen, Liu Ying, Rob
Herring and Wolfram Sang for code contributions and reviews and to Lee
Jones for preparing the above mentioned immutable branch"
* tag 'pwm/for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (21 commits)
pwm: stm32: Fix a typo
dt-bindings: pwm: amlogic: Add new bindings for meson A1 PWM
dt-bindings: pwm: amlogic: Add optional power-domains
pwm: Switch back to struct platform_driver::remove()
dt-bindings: pwm: allwinner,sun4i-a10-pwm: add top-level constraints
pwm: axi-pwmgen: use shared macro for version reg
pwm: atmel-hlcdc: Drop trailing comma
pwm: atmel-hlcdc: Enable module autoloading
pwm: omap-dmtimer: Use of_property_read_bool()
pwm: adp5585: Set OSC_EN bit to 1 when PWM state is enabled
pwm: lp3943: Fix an incorrect type in lp3943_pwm_parse_dt()
pwm: Simplify pwm_capture()
pwm: lp3943: Use of_property_count_u32_elems() to get property length
pwm: Don't export pwm_capture()
pwm: Make info in traces about affected pwm more useful
dt-bindings: pwm: renesas,tpu: Add r8a779h0 support
dt-bindings: pwm: renesas,pwm-rcar: Add r8a779h0 support
pwm: adp5585: Add Analog Devices ADP5585 support
gpio: adp5585: Add Analog Devices ADP5585 support
mfd: adp5585: Add Analog Devices ADP5585 core support
...
Prepare ep93xx SOC gpio to convert into device tree driver:
- dropped banks and legacy defines
- split AB IRQ and make it shared
We are relying on IRQ number information A, B ports have single shared
IRQ, while F port have dedicated IRQ for each line.
Also we had to split single ep93xx platform_device into multiple, one
for each port, without this we can't do a full working transition from
legacy platform code into device tree capable. All GPIO_LOOKUP were
change to match new chip namings.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use the preferred API for assigning system sleep pm callbacks in drivers.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240904140706.70359-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
devm_clk_get_optional() and clk_prepare_enable() can be replaced by helper
function devm_clk_get_optional_enabled(). Let's simplify code with use of
devm_clk_get_optional_enabled() and avoid calling clk_disable_unprepare().
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240904092311.9544-5-zhangzekun11@huawei.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
devm_clk_get_optional() and clk_prepare_enable() can be replaced by helper
function devm_clk_get_optional_enabled(). Let's simplify code with use of
devm_clk_get_optional_enabled() and avoid calling clk_disable_unprepare().
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240904092311.9544-4-zhangzekun11@huawei.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
devm_clk_get() and clk_prepare_enable() can be replaced by helper
function devm_clk_get_enabled(). Let's use devm_clk_get_enabled() to
simplify code and avoid calling clk_disable_unprepare().
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240904092311.9544-3-zhangzekun11@huawei.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
devm_clk_get() and clk_prepare_enable() can be replaced by helper
function devm_clk_get_enabled(). Let's use devm_clk_get_enabled() to
simplify code and avoid calling clk_disable_unprepare().
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240904092311.9544-2-zhangzekun11@huawei.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects. Although
that is not the case here, it is seems best to use ';' unless ',' is
intended.
Found by inspection. No functional change intended. Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20240905024245.1642989-1-nichen@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cleanup the includes by putting them in alphabetical order.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Link: https://lore.kernel.org/r/20240903154533.101258-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Simplify the code in error paths by using the managed variant of the
clock getter that controls the clock state as well.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240819151705.37258-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There are no more any board files that use the platform data for
gpio-davinci. We can remove the header defining it and port the code to
no longer store any context in pdata.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240819151705.37258-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
First of all, remove duplicate message that platform_get_irq()
does already print. Second, correct the error message when unable
to register a handler, which is broken in two ways:
1) the misleading 'get' vs. 'register';
2) missing '\n' at the end.
(Yes, for the curious ones, the dev_*() cases do not require '\n'
and issue it automatically, but it's better to have them explicit)
Fix all this here.
Fixes: 1882e76936 ("gpio: stmpe: Simplify with dev_err_probe()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240902133148.2569486-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based
on the alias from of_device_id table.
Fixes: 7687a5b0ee ("gpio: modepin: Add driver support for modepin GPIO controller")
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240902115848.904227-1-liaochen4@huawei.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Drop kerneldoc description of 'lock' to fix W=1 warning:
drivers/gpio/gpio-pch.c:101: warning: Excess struct member 'lock' description in 'pch_gpio'
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240902121258.64094-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use devm_clk_get_enabled() simplify zynq_gpio_probe() and zynq_gpio_remove().
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Rong Qianfeng <rongqianfeng@vivo.com>
Link: https://lore.kernel.org/r/20240820121651.29706-3-rongqianfeng@vivo.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The mpc8xxx GPIO can generate an interrupt on state change. This
interrupt can be used to wake up the device from its sleep state if
enabled to do so. Add required support to the driver so that the GPIO
can be used in this way.
In order for the GPIO to actually function in this way, it is necessary
to also set the GPIO bit in the RCPM. This can be done via the device
tree fsl,rcpm-wakeup property.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Link: https://lore.kernel.org/r/20240820143328.1987442-1-martyn.welch@collabora.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Fix the build warning with W=1 flag,
"Excess struct member 'compatible' description in 'syscon_gpio_data' "
by removing the documentation for the non existent member.
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20240902-b4-gpio-fix-v1-1-49a997994fa5@ti.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is no reason to keep deprecated legacy API implementations
in the gpiolib-devres.c. Consolidate devm_gpio_*() with other legacy
APIs. While at it, clean up header inclusion block in gpiolib-devres.c.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240828151357.2677340-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
$ scripts/kernel-doc -v -none -Wall drivers/gpio/gpiolib* 2>&1 | grep -w warning | wc -l
67
Fix these by adding Return sections. While at it, make sure all of
Return sections use the same style.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240828164449.2777666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
of_node_to_fwnode() is a IRQ domain specific implementation of
of_fwnode_handle(). Replace the former with more suitable API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240822223332.705560-1-andy.shevchenko@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
of_node_to_fwnode() is a IRQ domain specific implementation of
of_fwnode_handle(). Replace the former with more suitable API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240822225818.707550-1-andy.shevchenko@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
of_node_to_fwnode() is a IRQ domain specific implementation of
of_fwnode_handle(). Replace the former with more suitable API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240822225300.707178-1-andy.shevchenko@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
of_node_to_fwnode() is a IRQ domain specific implementation of
of_fwnode_handle(). Replace the former with more suitable API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240822224737.706870-1-andy.shevchenko@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
of_node_to_fwnode() is a IRQ domain specific implementation of
of_fwnode_handle(). Replace the former with more suitable API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240822225629.707365-1-andy.shevchenko@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
of_node_to_fwnode() is a IRQ domain specific implementation of
of_fwnode_handle(). Replace the former with more suitable API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240822224130.706564-1-andy.shevchenko@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
of_node_to_fwnode() is a IRQ domain specific implementation of
of_fwnode_handle(). Replace the former with more suitable API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240822223845.706346-1-andy.shevchenko@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use the IS_ERR_OR_NULL() helper instead of open-coding a
NULL and an error pointer checks to simplify the code and
improve readability.
No functional changes are intended.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20240828122039.3697037-1-lihongbo22@huawei.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Besides the fact that (old) drivers use wrong definitions, e.g.,
GPIOF_DIR_IN instead of GPIOF_IN, shrink the legacy definitions
by killing those GPIOF_DIR_* completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20240828142554.2424189-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Besides the fact that (old) drivers use wrong definitions, e.g.,
GPIOF_INIT_HIGH instead of GPIOF_OUT_INIT_HIGH, shrink the legacy
definitions by killing those GPIOF_INIT_* completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20240828142554.2424189-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use dev_err_probe() to simplify the error path and unify a message
template.
Using this helper is totally fine even if err is known to never
be -EPROBE_DEFER.
The benefit compared to a normal dev_err() is the standardized format
of the error code, it being emitted symbolically and the fact that
the error code is returned which allows more compact error paths.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240829131051.43200-1-shenlichuan@vivo.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There are no more board files defining platform data for this driver so
remove the header and support from the driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240821121456.19553-4-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Don't use specialized OF accessors if we can avoid it: switch to using
the generic device property helpers.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240821121456.19553-3-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Include mod_devicetable.h for struct of_device_id and its helpers.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240821121456.19553-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Print the error code in the pca953x_write_regs() and pca953x_read_regs()
functions to help debugging.
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20240821114202.2072220-1-festevam@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is no need to have and export the count variable for the array
in question. Instead, make it NULL-terminated.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240819142945.327808-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
For the sake of unification and easier maintenance replace
swnode_format_propname() call with for_each_gpio_property_name()
for-loop.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240819142945.327808-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Instead of the spreading simlar code over the file, introduce a helper.
It also enforces the nargs validation for all GPIO software node APIs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240819142945.327808-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Introduce a helper macro for_each_gpio_property_name().
With that in place, update users. This, in particular,
will help making the following simplifications easier.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240819142945.327808-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-----BEGIN PGP SIGNATURE-----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=nxTp
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-pwm-v6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, GPIO and PWM due for the v6.12 merge window
During Linux graceful reboot, the GPIO interrupts are not disabled.
Since the drivers are not removed during graceful reboot,
the logic to call mlxbf3_gpio_irq_disable() is not triggered.
Interrupts that remain enabled can cause issues on subsequent boots.
For example, the mlxbf-gige driver contains PHY logic to bring up the link.
If the gpio-mlxbf3 driver loads first, the mlxbf-gige driver
will use a GPIO interrupt to bring up the link.
Otherwise, it will use polling.
The next time Linux boots and loads the drivers in this order, we encounter the issue:
- mlxbf-gige loads first and uses polling while the GPIO10
interrupt is still enabled from the previous boot. So if
the interrupt triggers, there is nothing to clear it.
- gpio-mlxbf3 loads.
- i2c-mlxbf loads. The interrupt doesn't trigger for I2C
because it is shared with the GPIO interrupt line which
was not cleared.
The solution is to add a shutdown function to the GPIO driver to clear and disable
all interrupts. Also clear the interrupt after disabling it in mlxbf3_gpio_irq_disable().
Fixes: 38a700efc5 ("gpio: mlxbf3: Add gpio driver support")
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240611171509.22151-1-asmaa@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
For IP which do not contain PDDR, currently use the pinmux API
pinctrl_gpio_direction_input() to config the output/input, pinmux
currently do not support get_direction(). So here add the GPIO
get_direction() support only for the IP which has Port Data
Direction Register (PDDR).
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20240801093028.732338-3-haibo.chen@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This gpio controller support up to 32 pins per port. And all the
register width is 32 bit. So here use u32 to replace the original
unsigned long.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240801093028.732338-2-haibo.chen@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ADP5585 is a 10/11 input/output port expander with a built in keypad
matrix decoder, programmable logic, reset generator, and PWM generator.
This driver supports the GPIO function using the platform device
registered by the core MFD driver.
The driver is derived from an initial implementation from NXP, available
in commit 451f61b46b76 ("MLK-25917-2 gpio: adp5585-gpio: add
adp5585-gpio support") in their BSP kernel tree. It has been extensively
rewritten.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240722121100.2855-4-laurent.pinchart@ideasonboard.com
Signed-off-by: Lee Jones <lee@kernel.org>
Use of_property_present() to test for property presence rather than
of_find_property(). This is part of a larger effort to remove callers
of of_find_property() and similar functions. of_find_property() leaks
the DT struct property and data pointers which is a problem for
dynamically allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731191312.1710417-3-robh@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240715194341.1755599-2-u.kleine-koenig@baylibre.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
- don't use sprintf() with non-constant format string
-----BEGIN PGP SIGNATURE-----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=H8F0
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- don't use sprintf() with non-constant format string
* tag 'gpio-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: virtuser: avoid non-constant format string
- Treewide conversion of of_property_for_each_u32() to drop internal
arguments making struct property opaque
- Add binding for Amlogic A4 SoC watchdog
- Fix constraints for AD7192 'single-channel' property
-----BEGIN PGP SIGNATURE-----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=Nn/d
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"Most of this is a treewide change to of_property_for_each_u32() which
was small enough to do in one go before rc1 and avoids the need to
create of_property_for_each_u32_some_new_name().
- Treewide conversion of of_property_for_each_u32() to drop internal
arguments making struct property opaque
- Add binding for Amlogic A4 SoC watchdog
- Fix constraints for AD7192 'single-channel' property"
* tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: iio: adc: ad7192: Fix 'single-channel' constraints
of: remove internal arguments from of_property_for_each_u32()
dt-bindings: watchdog: add support for Amlogic A4 SoCs
Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases to
get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions. It's not all that useful for a "write a whole driver
in rust" type of thing, but the firmware bindings do help out the
phy rust drivers, and the driver core bindings give a solid base on
which others can start their work. There is still a long way to go
here before we have a multitude of rust drivers being added, but
it's a great first step.
- driver core const api changes. This reached across all bus types,
and there are some fix-ups for some not-common bus types that
linux-next and 0-day testing shook out. This work is being done to
help make the rust bindings more safe, as well as the C code, moving
toward the end-goal of allowing us to put driver structures into
read-only memory. We aren't there yet, but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm
cJEYtJpGtWX6aAtugm9E
=ZyJV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.
Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:
struct property *prop;
const __be32 *p;
u32 val;
of_property_for_each_u32(np, "xyz", prop, p, val) { ... }
to this:
u32 val;
of_property_for_each_u32(np, "xyz", val) { ... }
However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.
Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:
- drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
- drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
checks had to be replicated in a different way, making code more verbose
and somewhat uglier, but I refrained from a full rework to keep as much
of the original code untouched having no hardware to test my changes
All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.
Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Several new features here:
- Virtio find vqs API has been reworked
(required to fix the scalability issue we have with
adminq, which I hope to merge later in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaXjQQPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpnIsH/jVNqAQbe/vaBQdNMdnsA+P9A9unLbYRxYCQ
tN73mQRIXKtnZHBRAEbMGq52HPYg8HlN2HJSgyNo6I6t8VD+PiOco7m+3GpmqEcW
aXPOPl0BAbVoDgyutxRuuodP8Z61lBx0mG6iOxpzTXOPGlpQqtPCFHO8YnodqnPf
tMix/5uAqgZKV2siCbw5DtzwEc0gDHU8qsD0/nyoS5nBDF9yh/ardr5P/qiyFDQH
atCNYTOhIFU83pLAaw0fpCGbkt7gxf+5RpWVx3wkYww+/MwvYhsveRvQyaGbBz3n
WDtET3SOtVTta98OAGIKCq/2z8f6mYXBP7vXapBgnJG3vwS/poQ=
=LYua
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- Virtio find vqs API has been reworked (required to fix the
scalability issue we have with adminq, which I hope to merge later
in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (56 commits)
virtio: rename virtio_find_vqs_info() to virtio_find_vqs()
virtio: remove unused virtio_find_vqs() and virtio_find_vqs_ctx() helpers
virtio: convert the rest virtio_find_vqs() users to virtio_find_vqs_info()
virtio_balloon: convert to use virtio_find_vqs_info()
virtiofs: convert to use virtio_find_vqs_info()
scsi: virtio_scsi: convert to use virtio_find_vqs_info()
virtio_net: convert to use virtio_find_vqs_info()
virtio_crypto: convert to use virtio_find_vqs_info()
virtio_console: convert to use virtio_find_vqs_info()
virtio_blk: convert to use virtio_find_vqs_info()
virtio: rename find_vqs_info() op to find_vqs()
virtio: remove the original find_vqs() op
virtio: call virtio_find_vqs_info() from virtio_find_single_vq() directly
virtio: convert find_vqs() op implementations to find_vqs_info()
virtio_pci: convert vp_*find_vqs() ops to find_vqs_info()
virtio: introduce virtio_queue_info struct and find_vqs_info() config op
virtio: make virtio_find_single_vq() call virtio_find_vqs()
virtio: make virtio_find_vqs() call virtio_find_vqs_ctx()
caif_virtio: use virtio_find_single_vq() for single virtqueue finding
vdpa/mlx5: Don't enable non-active VQs in .set_vq_ready()
...
Using a string variable as an sprintf format is potentially
dangerous, and gcc can warn about this:
drivers/gpio/gpio-virtuser.c: In function 'gpio_virtuser_dbgfs_init_line_attrs':
drivers/gpio/gpio-virtuser.c:808:9: error: format not a string literal and no format arguments [-Werror=format-security]
808 | sprintf(data->consumer, id);
| ^~~~~~~
Change it to a simpler strscpy() instead to just copy it and check
the destination buffer size.
Fixes: 91581c4b3f ("gpio: virtuser: new virtual testing driver for the GPIO API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240719144422.2082394-1-arnd@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Since the original virtio_find_vqs() is no longer present, rename
virtio_find_vqs_info() back to virtio_find_vqs().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-20-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of passing separate names and callbacks arrays
to virtio_find_vqs(), have one of virtual_queue_info structs and
pass it to virtio_find_vqs_info().
Suggested-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20240708074814.1739223-18-jiri@resnulli.us>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more info
on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core to using
a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs from actual
hardware and driving tests of the in-kernel GPIO API from user-space over
debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first glance"
debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested as irqs
via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to errno
vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with regards to
reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop tempting
people to use it
- document the preference for using pread() for reading edge events in the
sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to specify
a number of callbacks callers can use to be notified about irqs being
requested and released
-----BEGIN PGP SIGNATURE-----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=kK88
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The majority of added lines are two new modules: the GPIO virtual
consumer module that improves our ability to add automated tests for
the kernel API and the "sloppy" logic analyzer module that uses the
GPIO API to implement a coarse-grained debugging tool for useful for
remote development.
Other than that we have the usual assortment of various driver
extensions, improvements to the core GPIO code, DT-bindings and other
documentation updates as well as an extension to the interrupt
simulator:
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more
info on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot
fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core
to using a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs
from actual hardware and driving tests of the in-kernel GPIO API
from user-space over debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first
glance" debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested
as irqs via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to
errno vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and
gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with
regards to reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop
tempting people to use it
- document the preference for using pread() for reading edge events
in the sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to
specify a number of callbacks callers can use to be notified about
irqs being requested and released"
* tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits)
gpio: mc33880: Convert comma to semicolon
gpio: virtuser: actually use the "trimmed" local variable
dt-bindings: gpio: convert Atmel GPIO to json-schema
gpio: virtuser: new virtual testing driver for the GPIO API
dt-bindings: gpio: vf610: Allow gpio-line-names to be set
gpio: sim: lock GPIOs as interrupts when they are requested
genirq/irq_sim: add an extended irq_sim initializer
dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio
gpiolib: unexport gpiochip_get_desc()
gpio: add sloppy logic analyzer using polling
Documentation: gpio: Reconfiguration with unset direction (uAPI v2)
Documentation: gpio: Reconfiguration with unset direction (uAPI v1)
dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names
gpio: ath79: convert to dynamic GPIO base allocation
pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc()
gpiolib: put gpio_suffixes in a single compilation unit
Documentation: gpio: Clarify effect of active low flag on line edges
Documentation: gpio: Clarify effect of active low flag on line values
gpiolib: Remove data-less gpiochip_add() function
gpio: sim: use devm_mutex_init()
...
The GPIO subsystem used to have a serious problem with undefined behavior
and use-after-free bugs on hot-unplug of GPIO chips. This can be
considered a corner-case by some as most GPIO controllers are enabled
early in the boot process and live until the system goes down but most
GPIO drivers do allow unbind over sysfs, many are loadable modules that
can be (force) unloaded and there are also GPIO devices that can be
dynamically detached, for instance CP2112 which is a USB GPIO expender.
Bugs can be triggered both from user-space as well as by in-kernel users.
We have the means of testing it from user-space via the character device
but the issues manifest themselves differently in the kernel.
This is a proposition of adding a new virtual driver - a configurable
GPIO consumer that can be configured over configfs (similarly to
gpio-sim) or described on the device-tree.
This driver is aimed as a helper in spotting any regressions in
hot-unplug handling in GPIOLIB.
Link: https://lore.kernel.org/r/20240708142912.120570-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
DTS for Nokia N900 incorrectly specifies "active high" polarity for
the reset line, while the chip documentation actually specifies it as
"active low". In the past the driver fudged gpiod API and inverted
the logic internally, but it was changed in d0d89493bf.
Fixes: d0d89493bf ("Input: tsc2004/5 - switch to using generic device properties")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ZoWXwYtwgJIxi-hD@google.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use the extended irq_sim interface to supply the simulated interrupt
domain with callbacks allowing the GPIO sim to lock/unlock GPIOs
requested as interrupts.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240624093934.17089-3-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
bgpio_bits must be aligned with the data bus width. For example, on a
32 bit big endian system and we only have 16 GPIOs. If we only assume
bgpio_bits=16 we can never control the GPIO because the base address
is the lowest address.
low address high address
-------------------------------------------------
| byte3 | byte2 | byte1 | byte0 |
-------------------------------------------------
| NaN | NaN | gpio8-15 | gpio0-7 |
-------------------------------------------------
Fixes: 55b2395e4e ("gpio: mmio: handle "ngpios" properly in bgpio_init()")
Fixes: https://github.com/openwrt/openwrt/issues/15739
Reported-by: Mark Mentovai <mark@mentovai.com>
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Suggested-By: Mark Mentovai <mark@mentovai.com>
Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Lóránd Horváth <lorand.horvath82@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/TYCP286MB089577B47D70F0AB25ABA6F5BCD52@TYCP286MB0895.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function has been deprecated for some time and is now only used
within the GPIOLIB core. Remove it from the public header and unexport
it as all current users are linked against the compilation unit where
it is defined.
Link: https://lore.kernel.org/r/20240625073815.12376-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As it turns out, there is a large number of out-of-tree DTSes (in
OpenWrt project) that used to specify incorrect (active high) polarity
for the Lantiq reset GPIO, so to keep compatibility while they are
being updated a quirk for force the polarity low is needed. Luckily
these old DTSes used nonstandard name for the property ("gpio-reset" vs
"reset-gpios") so the quirk will not hurt if there are any new devices
that need inverted polarity as they can specify the right polarity in
their DTS when using the standard "reset-gpios" property.
Additionally the condition to enable the transition from standard to
non-standard reset GPIO property name was inverted and the replacement
name for the property was not correct. Fix this as well.
Fixes: fbbbcd177a ("gpiolib: of: add quirk for locating reset lines with legacy bindings")
Fixes: 90c2d2eb7a ("MIPS: pci: lantiq: switch to using gpiod API")
Reported-by: Martin Schiller <ms@dev.tdt.de>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/ZoLpqv1PN08xHioh@google.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This is a sloppy logic analyzer using GPIOs. It comes with a script to
isolate a CPU for polling. While this is definitely not a production
level analyzer, it can be a helpful first view when remote debugging.
Read the documentation for details.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240620094159.6785-2-wsa+renesas@sang-engineering.com
[Bartosz: moved the Kconfig entry into a different category]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
linereq_set_config() behaves badly when direction is not set.
The configuration validation is borrowed from linereq_create(), where,
to verify the intent of the user, the direction must be set to in order to
effect a change to the electrical configuration of a line. But, when
applied to reconfiguration, that validation does not allow for the unset
direction case, making it possible to clear flags set previously without
specifying the line direction.
Adding to the inconsistency, those changes are not immediately applied by
linereq_set_config(), but will take effect when the line value is next get
or set.
For example, by requesting a configuration with no flags set, an output
line with GPIO_V2_LINE_FLAG_ACTIVE_LOW and GPIO_V2_LINE_FLAG_OPEN_DRAIN
set could have those flags cleared, inverting the sense of the line and
changing the line drive to push-pull on the next line value set.
Skip the reconfiguration of lines for which the direction is not set, and
only reconfigure the lines for which direction is set.
Fixes: a54756cb24 ("gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-3-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
linehandle_set_config() behaves badly when direction is not set.
The configuration validation is borrowed from linehandle_create(), where,
to verify the intent of the user, the direction must be set to in order
to effect a change to the electrical configuration of a line. But, when
applied to reconfiguration, that validation does not allow for the unset
direction case, making it possible to clear flags set previously without
specifying the line direction.
Adding to the inconsistency, those changes are not immediately applied by
linehandle_set_config(), but will take effect when the line value is next
get or set.
For example, by requesting a configuration with no flags set, an output
line with GPIOHANDLE_REQUEST_ACTIVE_LOW and GPIOHANDLE_REQUEST_OPEN_DRAIN
requested could have those flags cleared, inverting the sense of the line
and changing the line drive to push-pull on the next line value set.
Ensure the intent of the user by disallowing configurations which do not
have direction set, returning an error to userspace to indicate that the
configuration is invalid.
And, for clarity, use lflags, a local copy of gcnf.flags, throughout when
dealing with the requested flags, rather than a mixture of both.
Fixes: e588bb1eae ("gpio: add new SET_CONFIG ioctl() to gpio chardev")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-2-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
ath79 target has already been converted to device tree based platform.
Use dynamic GPIO numberspace base to suppress the warning:
gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
Tested on Atheros AR7241 and AR9344.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://lore.kernel.org/r/TYCP286MB089598EA71E964BD8AB9EFD3BCD62@TYCP286MB0895.JPNP286.PROD.OUTLOOK.COM
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Value of pdata->gpio_unbanked is taken from Device Tree. In case of broken
DT due to any error this value can be any. Without this value validation
there can be out of chips->irqs array boundaries access in
davinci_gpio_probe().
Validate the obtained nirq value so that it won't exceed the maximum
number of IRQs per bank.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: eb3744a2dd ("gpio: davinci: Do not assume continuous IRQ numbering")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://lore.kernel.org/r/20240618144344.16943-1-amishin@t-argos.ru
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Ensure that `i2c_lock' is held when setting interrupt latch and mask in
pca953x_irq_bus_sync_unlock() in order to avoid races.
The other (non-probe) call site pca953x_gpio_set_multiple() ensures the
lock is held before calling pca953x_write_regs().
The problem occurred when a request raced against irq_bus_sync_unlock()
approximately once per thousand reboots on an i.MX8MP based system.
* Normal case
0-0022: write register AI|3a {03,02,00,00,01} Input latch P0
0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0
0-0022: write register AI|08 {ff,00,00,00,00} Output P3
0-0022: write register AI|12 {fc,00,00,00,00} Config P3
* Race case
0-0022: write register AI|08 {ff,00,00,00,00} Output P3
0-0022: write register AI|08 {03,02,00,00,01} *** Wrong register ***
0-0022: write register AI|12 {fc,00,00,00,00} Config P3
0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Link: https://lore.kernel.org/r/20240620042915.2173-1-ian.ray@gehealthcare.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The gpio_suffixes array is defined in the gpiolib.h header. This means
the array is stored in .rodata of every compilation unit that includes
it. Put the definition for the array in gpiolib.c and export just the
symbol in the header. We need the size of the array so expose it too.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20240612184821.58053-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Drop the hand-coded devres action callback for destroying the mutex in
favor of devm_mutex_init().
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240610140548.35358-4-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We included kernel.h for ARRAY_SIZE() which has since been moved into
its own header. Use it instead.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240610140548.35358-3-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use the dedicated helper for comparing device names against strings.
While at it: reshuffle the code a bit for less indentation.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240610140548.35358-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
On x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-gw-pld.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-mc33880.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpio/gpio-pcf857x.o
Add the missing invocations of the MODULE_DESCRIPTION() macro,
including the one missing in gpio-pl061.c, which is not built for x86.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240606-md-drivers-gpio-v1-1-cb42d240ca5c@quicinc.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Show more info for interrupt only lines in debugfs. It's useful
to monitor the lines that have been never requested as GPIOs,
but IRQs.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240530191418.1138003-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The TQMx86 GPIO controller only supports falling and rising edge
triggers, but not both. Fix this by implementing a software both-edge
mode that toggles the edge type after every interrupt.
Fixes: b868db94a6 ("gpio: tqmx86: Add GPIO from for this IO controller")
Co-developed-by: Gregor Herburger <gregor.herburger@tq-group.com>
Signed-off-by: Gregor Herburger <gregor.herburger@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/515324f0491c4d44f4ef49f170354aca002d81ef.1717063994.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
irq_set_type() should not implicitly unmask the IRQ.
All accesses to the interrupt configuration register are moved to a new
helper tqmx86_gpio_irq_config(). We also introduce the new rule that
accessing irq_type must happen while locked, which will become
significant for fixing EDGE_BOTH handling.
Fixes: b868db94a6 ("gpio: tqmx86: Add GPIO from for this IO controller")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/6aa4f207f77cb58ef64ffb947e91949b0f753ccd.1717063994.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The TQMx86 GPIO controller uses the same register address for input and
output data. Reading the register will always return current inputs
rather than the previously set outputs (regardless of the current
direction setting). Therefore, using a RMW pattern does not make sense
when setting output values. Instead, the previously set output register
value needs to be stored as a shadow register.
As there is no reliable way to get the current output values from the
hardware, also initialize all channels to 0, to ensure that stored and
actual output values match. This should usually not have any effect in
practise, as the TQMx86 UEFI sets all outputs to 0 during boot.
Also prepare for extension of the driver to more than 8 GPIOs by using
DECLARE_BITMAP.
Fixes: b868db94a6 ("gpio: tqmx86: Add GPIO from for this IO controller")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/d0555933becd45fa92a85675d26e4d59343ddc01.1717063994.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add support for the TI TCA9535 variant.
The NXP PCA9535 is already supported by the driver.
TCA9535 supports lower voltage operation (down to 1.65V VCC)
compared to PCA (down to 2.3V VCC).
>From a software perspective, these models are equivalent as they
have the same register map.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20240531121801.2161154-1-festevam@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The GPIO_BRCMSTB hardware IP is also included in the bcm2712
SoC so enable the driver to also be built for ARCH_BCM2835.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240530181737.1261450-1-pbrobinson@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The handling of kfifo_out() errors in read functions obscures any error.
The error condition should never occur but, while a ret is set to -EIO, it
is subsequently ignored and the read functions instead return the number
of bytes copied to that point, potentially masking the fact that any error
occurred.
Log a warning and return -EIO in the case of a kfifo_out() error to make
it clear something very odd is going on here.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240529131953.195777-4-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The allocation of the linereq events kfifo is performed in two separate
places. Add a helper function to remove the duplication.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240529131953.195777-3-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The initialisation of the linereq events kfifo relies on the struct being
zeroed and a subsequent call to kfifo_alloc(). The call to kfifo_alloc()
is deferred until edge detection is first enabled for the linereq. If the
kfifo is inadvertently accessed before the call to kfifo_alloc(), as was
the case in a recently discovered bug, it behaves as a FIFO of size 1 with
an element size of 0, so writes and reads to the kfifo appear successful
but copy no actual data.
As a defensive measure, initialise the kfifo with INIT_KFIFO() when the
events kfifo is constructed. This initialises the kfifo element size
and zeroes its data pointer, so any inadvertant access prior to the
kfifo_alloc() call will trigger an oops.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240529131953.195777-2-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
rdc_gpio_config() uses pci_{read,write}_config_dword() that return
PCIBIOS_* codes. rdc_gpio_config() is used for
direction_{input,output}() in the struct gpio_chip which both require
normal errnos to be returned.
Similarly, rdc321x_gpio_probe() that is probe function returns
PCIBIOS_* codes without converting them first into normal errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning them to fix both issues.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240527132345.13956-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
amd_gpio_init() uses pci_read_config_dword() that returns PCIBIOS_*
codes. The return code is then returned as is but amd_gpio_init() is
a module init function that should return normal errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning it from amd_gpio_init().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240527132345.13956-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Do not issue "can't read the data register offset!" when gpio,syscon-dev
is not set albeit unneeded. gpio-syscon is used with rk3328 chip, but
this iomem region is documented in
Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml and
does not require gpio,syscon-dev setting.
Signed-off-by: Etienne Buira <etienne.buira@free.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/Zktwd4Y8zu6XSGaE@Z926fQmE5jqhFMgp6
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Userspace may trigger a speculative read of an address outside the gpio
descriptor array.
Users can do that by calling gpio_ioctl() with an offset out of range.
Offset is copied from user and then used as an array index to get
the gpio descriptor without sanitization in gpio_device_get_desc().
This change ensures that the offset is sanitized by using
array_index_nospec() to mitigate any possibility of speculative
information leaks.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Link: https://lore.kernel.org/r/20240523085332.1801-1-hagarhem@amazon.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Several new features here:
- virtio-net is finally supported in vduse.
- Virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmZN570PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp2JUH/1K3fZOHymop6Y5Z3USFS7YdlF+dniedY/vg
TKyWERkXOlxq1d9DVxC0mN7tk72DweuWI0YJjLXofrEW1VuW29ecSbyFXxpeWJls
b7ErffxDAFRas5jkMCngD8TuFnbEegU0mGP5kbiHpEndBydQ2hH99Gg0x7swW+cE
xsvU5zonCCLwLGIP2DrVrn9qGOHtV6o8eZfVKDVXfvicn3lFBkUSxlwEYsO9RMup
aKxV4FT2Pb1yBicwBK4TH1oeEXqEGy1YLEn+kAHRbgoC/5L0/LaiqrkzwzwwOIPj
uPGkacf8CIbX0qZo5EzD8kvfcYL1xhU3eT9WBmpp2ZwD+4bINd4=
=nax1
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-net is finally supported in vduse
- virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-pci: Check if is_avq is NULL
virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
MAINTAINERS: add Eugenio Pérez as reviewer
vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
vp_vdpa: don't allocate unused msix vectors
sound: virtio: drop owner assignment
fuse: virtio: drop owner assignment
scsi: virtio: drop owner assignment
rpmsg: virtio: drop owner assignment
nvdimm: virtio_pmem: drop owner assignment
wifi: mac80211_hwsim: drop owner assignment
vsock/virtio: drop owner assignment
net: 9p: virtio: drop owner assignment
net: virtio: drop owner assignment
net: caif: virtio: drop owner assignment
misc: nsm: drop owner assignment
iommu: virtio: drop owner assignment
drm/virtio: drop owner assignment
gpio: virtio: drop owner assignment
firmware: arm_scmi: virtio: drop owner assignment
...
virtio core already sets the .owner, so driver does not need to.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-12-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Previous patch modified the standard used by acpi_gpiochip_find()
to match device nodes. Using the device node set in gc->gpiodev->d-
ev instead of gc->parent.
However, there is a situation in gpio-dwapb where the GPIO device
driver will set gc->fwnode for each port corresponding to a child
node under a GPIO device, so gc->gpiodev->dev will be assigned the
value of each child node in gpiochip_add_data().
gpio-dwapb.c:
128,31 static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
struct dwapb_port_property *pp,
unsigned int offs);
port->gc.fwnode = pp->fwnode;
693,39 static int dwapb_gpio_probe;
err = dwapb_gpio_add_port(gpio, &pdata->properties[i], i);
When other drivers request GPIO pin resources through the GPIO device
node provided by ACPI (corresponding to the parent node), the change
of the matching object to gc->gpiodev->dev in acpi_gpiochip_find()
only allows finding the value of each port (child node), resulting
in a failed request.
Reapply the condition of using gc->parent for match in acpi_gpio-
chip_find() in the code can compatible with the problem of gpio-dwapb,
and will not affect the two cases mentioned in the patch:
1. There is no setting for gc->fwnode.
2. The case that depends on using gc->fwnode for match.
Fixes: 5062e4c14b ("gpiolib: acpi: use the fwnode in acpi_gpiochip_find()")
Fixes: 067dbc1ea5 ("gpiolib: acpi: Don't use GPIO chip fwnode in acpi_gpiochip_find()")
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Following the relocation of the function call outside of
__acpi_find_gpio(), move the ACPI device NULL check to
acpi_can_fallback_to_crs().
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: kernelci.org bot <bot@kernelci.org>
Closes: https://lore.kernel.org/all/20240426154208.81894-1-laura.nao@collabora.com/
Fixes: 49c02f6e90 ("gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
GPIO core:
- remove more unused legacy interfaces (after converting the last remaining
users to better alternatives)
- update kerneldocs
- improve error handling and log messages in GPIO ACPI code
- remove dead code (always true checks) from GPIOLIB
New drivers:
- add a driver for Intel Granite Rapids-D vGPIO
Driver improvements:
- use -ENOTSUPP consistently in gpio-regmap and gpio-pcie-idio-24
- provide an ID table for gpio-cros-ec to avoid a driver name fallback check
- add support for gpio-ranges for GPIO drivers supporting multiple GPIO banks
- switch to using dynamic GPIO base in gpio-brcmstb
- fix irq handling in gpio-npcm-sgpio
- switch to memory mapped IO accessors in gpio-sch
DT bindings:
- add support for gpio-ranges to gpio-brcmstb
- add support for a new model and the gpio-line-names property to gpio-mpfs
Documentation:
- replace leading tabs with spaces in code blocks
- fix typos
-----BEGIN PGP SIGNATURE-----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=mBWd
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski
"This was a quiet release cycle for the GPIO tree and so this
pull-request is relatively small.
We have one new driver, some minor improvements to the GPIO core code
and across several drivers, some DT and documentation updates but in
general nothing stands out or is controversial. All changes have spent
time in next with no reported issues (or ones that were quickly
fixed).
GPIO core:
- remove more unused legacy interfaces (after converting the last
remaining users to better alternatives)
- update kerneldocs
- improve error handling and log messages in GPIO ACPI code
- remove dead code (always true checks) from GPIOLIB
New drivers:
- add a driver for Intel Granite Rapids-D vGPIO
Driver improvements:
- use -ENOTSUPP consistently in gpio-regmap and gpio-pcie-idio-24
- provide an ID table for gpio-cros-ec to avoid a driver name
fallback check
- add support for gpio-ranges for GPIO drivers supporting multiple
GPIO banks
- switch to using dynamic GPIO base in gpio-brcmstb
- fix irq handling in gpio-npcm-sgpio
- switch to memory mapped IO accessors in gpio-sch
DT bindings:
- add support for gpio-ranges to gpio-brcmstb
- add support for a new model and the gpio-line-names property to
gpio-mpfs
Documentation:
- replace leading tabs with spaces in code blocks
- fix typos"
* tag 'gpio-updates-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (30 commits)
gpio: nuvoton: Fix sgpio irq handle error
gpiolib: Discourage to use formatting strings in line names
gpio: brcmstb: add support for gpio-ranges
gpio: of: support gpio-ranges for multiple gpiochip devices
dt-bindings: gpio: brcmstb: add gpio-ranges
gpio: Add Intel Granite Rapids-D vGPIO driver
gpio: brcmstb: Use dynamic GPIO base numbers
gpiolib: acpi: Set label for IRQ only lines
gpiolib: acpi: Add fwnode name to the GPIO interrupt label
gpiolib: Get rid of never false gpio_is_valid() calls
gpiolib: acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
gpiolib: acpi: Simplify error handling in __acpi_find_gpio()
gpiolib: acpi: Extract __acpi_find_gpio() helper
gpio: sch: Utilise temporary variable for struct device
gpio: sch: Switch to memory mapped IO accessors
gpio: regmap: Use -ENOTSUPP consistently
gpio: pcie-idio-24: Use -ENOTSUPP consistently
Documentation: gpio: Replace leading TABs by spaces in code blocks
gpiolib: acpi: Check for errors first in acpi_find_gpio()
...
The diffstat for this release is dominated by the new Airoha driver,
mainly as a result of this being a generally quite quiet release. There
were a couple of cleanups in the core but nothing substantial, the
updates here are almost all driver specific ones.
- Support for multi-word mode in the OMAP2 McSPI driver.
- Overhaul of the PXA2xx driver, mostly API updates.
- A number of DT binding conversions.
- Support for Airoha NAND controllers, Cirrus Logic CS35L56, Mobileye
EYEQ5 and Renesas R8A779H0.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZB2z0ACgkQJNaLcl1U
h9CCxgf/ZSy6jKbUejdq/JtdrhVCamaEVQ1X5FAk18wlumQVwFC/Bsntr1hVWDjg
Ai+G/UYWtfabyVePZKh1zCcoloSuZheHcxAMP+43un1doWcHps6leiPfb9yAysux
VxeIBfSUOfeFbN697Jz8PDTIhxHMUh0R4QYqqIyrT1RSS0alRZoDyaQpTWied0Nt
pOUWi9SVt0jm/G+X29a6Q/pFsr0oEJHxZgvriwlJAyzWr1OModFXdTfdK+qMS1Hn
huafVu4bWCEognGlnXCQSRL94Fxo1nab1PvMuWK2VXNDL7xexqQ33cp4VILZvJo1
qR9YtiRXpScAmO7f8ccGcSlz8vw5jQ==
=x3Vz
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The diffstat for this release is dominated by the new Airoha driver,
mainly as a result of this being a generally quite quiet release.
There were a couple of cleanups in the core but nothing substantial,
the updates here are almost all driver specific ones.
- Support for multi-word mode in the OMAP2 McSPI driver
- Overhaul of the PXA2xx driver, mostly API updates
- A number of DT binding conversions
- Support for Airoha NAND controllers, Cirrus Logic CS35L56, Mobileye
EYEQ5 and Renesas R8A779H0"
* tag 'spi-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits)
spi: dw: Bail out early on unsupported target mode
spi: Remove unneded check for orig_nents
MAINTAINERS: repair file entry in AIROHA SPI SNFI DRIVER
spi: pxa2xx: Drop the stale entry in documentation TOC
spi: pxa2xx: Don't provide struct chip_data for others
spi: pxa2xx: Remove timeout field from struct chip_data
spi: pxa2xx: Remove DMA parameters from struct chip_data
spi: pxa2xx: Drop struct pxa2xx_spi_chip
spi: pxa2xx: Don't use "proxy" headers
spi: pxa2xx: Remove outdated documentation
spi: pxa2xx: Move contents of linux/spi/pxa2xx_spi.h to a local one
spi: pxa2xx: Provide num-cs for Sharp PDAs via device properties
spi: pxa2xx: Allow number of chip select pins to be read from property
spi: dt-bindings: ti,qspi: convert to dtschema
spi: bitbang: Add missing MODULE_DESCRIPTION()
spi: bitbang: Use NSEC_PER_*SEC rather than hard coding
spi: dw: Drop default number of CS setting
spi: dw: Convert dw_spi::num_cs to u32
spi: dw: Add a number of native CS auto-detection
spi: dw: Convert to using BITS_TO_BYTES() macro
...
If a line is requested with debounce, and that results in debouncing
in software, and the line is subsequently reconfigured to enable edge
detection then the allocation of the kfifo to contain edge events is
overlooked. This results in events being written to and read from an
uninitialised kfifo. Read events are returned to userspace.
Initialise the kfifo in the case where the software debounce is
already active.
Fixes: 65cff70464 ("gpiolib: cdev: support setting debounce")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240510065342.36191-1-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The use-after-free issue occurs as follows: when the GPIO chip device file
is being closed by invoking gpio_chrdev_release(), watched_lines is freed
by bitmap_free(), but the unregistration of lineinfo_changed_nb notifier
chain failed due to waiting write rwsem. Additionally, one of the GPIO
chip's lines is also in the release process and holds the notifier chain's
read rwsem. Consequently, a race condition leads to the use-after-free of
watched_lines.
Here is the typical stack when issue happened:
[free]
gpio_chrdev_release()
--> bitmap_free(cdev->watched_lines) <-- freed
--> blocking_notifier_chain_unregister()
--> down_write(&nh->rwsem) <-- waiting rwsem
--> __down_write_common()
--> rwsem_down_write_slowpath()
--> schedule_preempt_disabled()
--> schedule()
[use]
st54spi_gpio_dev_release()
--> gpio_free()
--> gpiod_free()
--> gpiod_free_commit()
--> gpiod_line_state_notify()
--> blocking_notifier_call_chain()
--> down_read(&nh->rwsem); <-- held rwsem
--> notifier_call_chain()
--> lineinfo_changed_notify()
--> test_bit(xxxx, cdev->watched_lines) <-- use after free
The side effect of the use-after-free issue is that a GPIO line event is
being generated for userspace where it shouldn't. However, since the chrdev
is being closed, userspace won't have the chance to read that event anyway.
To fix the issue, call the bitmap_free() function after the unregistration
of lineinfo_changed_nb notifier chain.
Fixes: 51c1064e82 ("gpiolib: add new ioctl() for monitoring changes in line info")
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Link: https://lore.kernel.org/r/20240505141156.2944912-1-quic_zhonhan@quicinc.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We used a per-descriptor SRCU struct in order to not impose a wait with
synchronize_srcu() for descriptor X on read-only operations of
descriptor Y. Now that we no longer call synchronize_srcu() on
descriptor label change but only when releasing descriptor resources, we
can use a single SRCU structure for all GPIO descriptors in a given chip.
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Acked-by: "Paul E. McKenney" <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240507172414.28513-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Commit 1f2bcb8c8c ("gpio: protect the descriptor label with SRCU")
caused a massive drop in performance of requesting GPIO lines due to the
call to synchronize_srcu() on each label change. Rework the code to not
wait until all read-only users are done with reading the label but
instead atomically replace the label pointer and schedule its release
after all read-only critical sections are done.
To that end wrap the descriptor label in a struct that also contains the
rcu_head struct required for deferring tasks using call_srcu() and stop
using kstrdup_const() as we're required to allocate memory anyway. Just
allocate enough for the label string and rcu_head in one go.
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Closes: https://lore.kernel.org/linux-gpio/CAMRc=Mfig2oooDQYTqo23W3PXSdzhVO4p=G4+P8y1ppBOrkrJQ@mail.gmail.com/
Fixes: 1f2bcb8c8c ("gpio: protect the descriptor label with SRCU")
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Acked-by: "Paul E. McKenney" <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240507121346.16969-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The generic_handle_domain_irq() function calls irq_resolve_mapping().
Thus delete a duplicative irq_find_mapping() call
so that a stack trace and an RCU stall will be avoided.
Fixes: c4f8457d17 ("gpio: nuvoton: Add Nuvoton NPCM sgpio driver")
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240506064244.1645922-1-JJLIU0@nuvoton.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
* New driver for vGPIO controller on Intel Granite Rapids-D
* Update ACPI GPIO library to unify the IRQ code path
* Better GPIO IRQ line labeling for ACPI
* Switched Intel SCH driver to use "mapped" I/O accessors
The following is an automated git shortlog grouped by driver:
Add Intel Granite Rapids-D vGPIO driver:
- Add Intel Granite Rapids-D vGPIO driver
crystalcove:
- Use -ENOTSUPP consistently
gpiolib:
- acpi: Set label for IRQ only lines
- acpi: Add fwnode name to the GPIO interrupt label
- acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
- acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
- acpi: Simplify error handling in __acpi_find_gpio()
- acpi: Extract __acpi_find_gpio() helper
- acpi: Check for errors first in acpi_find_gpio()
- acpi: Remove never true check in acpi_get_gpiod_by_index()
sch:
- Utilise temporary variable for struct device
- Switch to memory mapped IO accessors
wcove:
- Use -ENOTSUPP consistently
-----BEGIN PGP SIGNATURE-----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=33sC
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.10-1
* New driver for vGPIO controller on Intel Granite Rapids-D
* Update ACPI GPIO library to unify the IRQ code path
* Better GPIO IRQ line labeling for ACPI
* Switched Intel SCH driver to use "mapped" I/O accessors
The following is an automated git shortlog grouped by driver:
Add Intel Granite Rapids-D vGPIO driver:
- Add Intel Granite Rapids-D vGPIO driver
crystalcove:
- Use -ENOTSUPP consistently
gpiolib:
- acpi: Set label for IRQ only lines
- acpi: Add fwnode name to the GPIO interrupt label
- acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by()
- acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()
- acpi: Simplify error handling in __acpi_find_gpio()
- acpi: Extract __acpi_find_gpio() helper
- acpi: Check for errors first in acpi_find_gpio()
- acpi: Remove never true check in acpi_get_gpiod_by_index()
sch:
- Utilise temporary variable for struct device
- Switch to memory mapped IO accessors
wcove:
- Use -ENOTSUPP consistently
A pin controller device mapped with the gpio-ranges property
will need implementations of the .request and .free members of
the gpiochip.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Tested-by: Phil Elwell <phil@raspberrypi.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240424185039.1707812-4-opendmb@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Some drivers (e.g. gpio-mt7621 and gpio-brcmstb) have multiple
gpiochip banks within a single device. Unfortunately, the
gpio-ranges property of the device node was being applied to
every gpiochip of the device with device relative GPIO offset
values rather than gpiochip relative GPIO offset values.
This commit makes use of the gpio_chip offset value which can be
non-zero for such devices to split the device node gpio-ranges
property into GPIO offset ranges that can be applied to each
of the relevant gpiochips of the device.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240424185039.1707812-3-opendmb@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
* Make data pointer dereference robust in Intel Tangier driver
The following is an automated git shortlog grouped by driver:
tangier:
- Use correct type for the IRQ chip data
-----BEGIN PGP SIGNATURE-----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=688G
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-current
intel-gpio for v6.9-2
* Make data pointer dereference robust in Intel Tangier driver
The following is an automated git shortlog grouped by driver:
tangier:
- Use correct type for the IRQ chip data
This driver provides a basic GPIO driver for the Intel Granite Rapids-D
virtual GPIOs. On SoCs with limited physical pins on the package, the
physical pins controlled by this driver would be exposed on an external
device such as a BMC or CPLD. The virtual GPIO registers are an
interface to firmware, which communicates with the external device that
implements the GPIO hardware functionality.
Signed-off-by: Aapo Vienamo <aapo.vienamo@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The controller has several register bits describing access control
information for a given GPIO pin. When SCR_SEC_[R|W]EN is unset, it
means we have full read/write access to all the registers for given GPIO
pin. When SCR_SEC[R|W]EN is set, it means we need to further check the
accompanying SCR_SEC_G1[R|W] bit to determine read/write access to all
the registers for given GPIO pin.
This check was previously declaring that a GPIO pin was accessible
only if either of the following conditions were met:
- SCR_SEC_REN + SCR_SEC_WEN both set
or
- SCR_SEC_REN + SCR_SEC_WEN both set and
SCR_SEC_G1R + SCR_SEC_G1W both set
Update the check to properly handle cases where only one of
SCR_SEC_REN or SCR_SEC_WEN is set.
Fixes: b2b56a1632 ("gpio: tegra186: Check GPIO pin permission before access.")
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20240424095514.24397-1-pshete@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Forcing a gpiochip to have a fixed base number now leads to a warning
message. Remove the need to do so by using the offset value of the
gpiochip.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240423184605.2094376-1-opendmb@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When line locked as IRQ it has no label assigned. Assign
the meaningful value to it.
Ex. (for the PCA9355 and MAX3111e chips connected to the system):
=== Before ===
PCA953x: interrupt
MAX3111e: interrupt
=== After ===
PCA953x: NIO1 GpioInt(0)
MAX3111e: URT0 GpioInt(0)
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
It's ambiguous to have a device-related index in the GPIO interrupt
label as most of the devices will have it the same or very similar.
Extend label with fwnode name for better granularity. It significantly
reduces the scope of searching among devices.
Ex. (for the PCA9355 and MAX3111e chips connected to the system):
=== Before ===
PCA953x: GpioInt() 0
MAX3111e: GpioInt() 0
=== After ===
PCA953x: NIO1 GpioInt(0)
MAX3111e: URT0 GpioInt(0)
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In the cases when gpio_is_valid() is called with unsigned parameter
the result is always true in the GPIO library code, hence the check
for false won't ever be true. Get rid of such calls.
While at it, move GPIO device base to be unsigned to clearly show
it won't ever be negative. This requires a new definition for the
maximum GPIO number in the system.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
SPI devices can specify a cs-gpios property to enumerate their
chip selects. Under device tree, a zero entry in this property can
be used to specify that a particular chip select is using the SPI
controllers native chip select, for example:
cs-gpios = <&gpio1 0 0>, <0>;
Here, the second chip select is native. However, when using swnodes
there is currently no way to specify a native chip select. The
proposal here is to register a swnode_gpio_undefined software node,
that can be specified to allow the indication of a native chip
select. For example:
static const struct software_node_ref_args device_cs_refs[] = {
{
.node = &device_gpiochip_swnode,
.nargs = 2,
.args = { 0, GPIO_ACTIVE_LOW },
},
{
.node = &swnode_gpio_undefined,
.nargs = 0,
},
};
Register the swnode as the gpiolib is initialised and check in
swnode_get_gpio_device() if the returned node matches
swnode_gpio_undefined and return -ENOENT, which matches the
behaviour of the device tree system when it encounters a 0 phandle.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240416100904.3738093-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pass the con_id instead of property so that callers won't repeat
the GPIO suffixes to try.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
New coming user may need to check for _CRS fallback slightly differently.
Move the current check out of the helper function to allow that user to
use it.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Now that we don't perform anything on the GPIO descriptor,
we may simplify the error path in newly introduced helper.
Do it so.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We want to reuse it later on in the code. In particular, it helps
to clean up the users of acpi_dev_gpio_irq_wake_get_by().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We have a temporary variable to keep a pointer to struct device.
Utilise it where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
IRQ chip data contains a pointer to the GPIO chip. Luckily we have
the pointers the same, but strictly speaking it's not guaranteed.
Even though, still better to fix this.
Fixes: ccf6fd6dcc ("gpio: merrifield: Introduce GPIO driver to support Merrifield")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The GPIO library expects the drivers to return -ENOTSUPP in some cases
and not using analogue POSIX code. Make the driver to follow this.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The GPIO library expects the drivers to return -ENOTSUPP in some cases
and not using analogue POSIX code. Make the driver to follow this.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: William Breathitt Gray <wbg@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
It's better to parse the code when the usual pattern is being used,
i.e. checking for error condition first.
There is no functional or code generation change (tested in LLVM).
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The acpi_get_gpiod_by_index() never is called with adev being NULL.
Remove the redundant check.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* Fix returned code in the error path in Intel PMIC GPIO drivers
The following is an automated git shortlog grouped by driver:
crystalcove:
- Use -ENOTSUPP consistently
wcove:
- Use -ENOTSUPP consistently
-----BEGIN PGP SIGNATURE-----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=nT1m
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-current
intel-gpio for v6.9-1
* Fix returned code in the error path in Intel PMIC GPIO drivers
The following is an automated git shortlog grouped by driver:
crystalcove:
- Use -ENOTSUPP consistently
wcove:
- Use -ENOTSUPP consistently
The GPIO library expects the drivers to return -ENOTSUPP in some
cases and not using analogue POSIX code. Make the driver to follow
this.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The GPIO library expects the drivers to return -ENOTSUPP in some
cases and not using analogue POSIX code. Make the driver to follow
this.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When adding sanitization of the label, the path through
edge_detector_setup() that leads to debounce_setup() was overlooked.
A request taking this path does not allocate a new label and the
request label is freed twice when the request is released, resulting
in memory corruption.
Add label sanitization to debounce_setup().
Cc: stable@vger.kernel.org
Fixes: b34490879b ("gpio: cdev: sanitize the label before requesting the interrupt")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
[Bartosz: rebased on top of the fix for empty GPIO labels]
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We need to take into account that a line's consumer label may be NULL
and not try to kstrdup() it in that case but rather pass the NULL
pointer up the stack to the interrupt request function.
To that end: let make_irq_label() return NULL as a valid return value
and use ERR_PTR() instead to signal an allocation failure to callers.
Cc: stable@vger.kernel.org
Fixes: b34490879b ("gpio: cdev: sanitize the label before requesting the interrupt")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/lkml/20240402093534.212283-1-naresh.kamboju@linaro.org/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
We are going to remove legacy API from kernel, don't mention
it in the code that does not use it already for a while.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
No more users.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When a gpiochip gets added by loading a module, then another driver may
be waiting for that gpiochip to load on the deferred-probe list.
If the deferred-probe for the consumer of gpiochip then triggers between
the gpiodev_add_to_list_unlocked() calls which makes gpio_device_find()
see the chip and the gpiochip_setup_dev() later then gpio_device_find()
does a kobject_get() on an uninitialized kobject since the kobject is
initialized by gpiochip_setup_dev() calling device_initialize():
arizona spi-10WM5102:00: cannot find GPIO chip arizona, deferring
arizona spi-10WM5102:00: cannot find GPIO chip arizona, deferring
------------[ cut here ]------------
kobject: 'gpiochip5' (00000000241466f2): is not initialized, yet kobject_get() is being called.
WARNING: CPU: 3 PID: 42 at lib/kobject.c:640 kobject_get+0x43/0x70
Call Trace:
kobject_get
gpio_device_find
gpiod_find_and_request
gpiod_get
snd_byt_wm5102_mc_probe
Not only is the device not initialized yet, but when the gpio-device is
added to the list things like the irqchip also have not been initialized
yet.
So gpio_device_find() should really ignore the gpio-device until
gpiochip_add_data_with_key() is fully done. Add a device_is_registered()
check to gpio_device_find() to ignore gpio-devices on the list which are
not yet fully initialized.
Fixes: aab5c6f200 ("gpio: set device type for GPIO chips")
Suggested-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
[Bartosz: fix a typo in commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Instead of using fallback driver name match, provide ID table[1] for the
primary match. Also allow automatic module loading by adding
MODULE_DEVICE_TABLE().
[1]: https://elixir.bootlin.com/linux/v6.8/source/drivers/base/platform.c#L1353
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When gpio-ranges property was missed to be added in the gpio node,
using dev_err() to show an error message will helping to locate issues
easier.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When consolidating GPIO lookups in ACPI code, the debug messaging
had been reworked that the user may see
[ 13.401147] (NULL device *): using ACPI '\_SB.LEDS.led-0' for '(null)' GPIO lookup
[ 13.401378] gpio gpiochip0: Persistence not supported for GPIO 40
[ 13.401402] gpio-40 (?): no flags found for (null)
instead of
[ 14.182962] gpio gpiochip0: Persistence not supported for GPIO 40
[ 14.182994] gpio-40 (?): no flags found for gpios
The '(null)' parts are less informative and likely scare the users.
Replace them by '(default)' which can point out to the default connection
IDs, such as 'gpios'.
While at it, amend other places where con_id is used in the messages.
Reported-by: Ferry Toth <ftoth@exalondelft.nl>
Fixes: 8eb1f71e7a ("gpiolib: consolidate GPIO lookups")
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When an interrupt is requested, a procfs directory is created under
"/proc/irq/<irqnum>/<label>" where <label> is the string passed to one of
the request_irq() variants.
What follows is that the string must not contain the "/" character or
the procfs mkdir operation will fail. We don't have such constraints for
GPIO consumer labels which are used verbatim as interrupt labels for
GPIO irqs. We must therefore sanitize the consumer string before
requesting the interrupt.
Let's replace all "/" with ":".
Cc: stable@vger.kernel.org
Reported-by: Stefan Wahren <wahrenst@gmx.net>
Closes: https://lore.kernel.org/linux-gpio/39fe95cb-aa83-4b8b-8cab-63947a726754@gmx.net/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
No core changes this time around.
New drivers:
- New driver for Renesas R8A779H0 also known as R-Car V4M.
- New driver for the Awinic AW9523/B I2C GPIO expander.
I found this living out-of-tree in OpenWrt as an upstream
attempt had stalled on the finishing line, so I picked it
up and finished the job.
Improvements:
- The Nomadik pin control driver was for years re-used out of
tree for the ST STA chips, and now the IP was re-used in a
MIPS automotive SoC called MobilEyeq5, so it has been split
in pin control and GPIO drivers so the latter can be reused
by MobilEyeq5. (Along with a long list of cleanups.)
- A lot of overall cleanup and tidying up.
-----BEGIN PGP SIGNATURE-----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=Pt9Y
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time around.
New drivers:
- New driver for Renesas R8A779H0 also known as R-Car V4M.
- New driver for the Awinic AW9523/B I2C GPIO expander. I found this
living out-of-tree in OpenWrt as an upstream attempt had stalled on
the finishing line, so I picked it up and finished the job.
Improvements:
- The Nomadik pin control driver was for years re-used out of tree
for the ST STA chips, and now the IP was re-used in a MIPS
automotive SoC called MobilEyeq5, so it has been split in pin
control and GPIO drivers so the latter can be reused by MobilEyeq5.
(Along with a long list of cleanups)
- A lot of overall cleanup and tidying up"
* tag 'pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (87 commits)
drivers/gpio/nomadik: move dummy nmk_gpio_dbg_show_one() to header
gpio: nomadik: remove BUG_ON() in nmk_gpio_populate_chip()
dt-bindings: pinctrl: qcom: update compatible name for match with driver
pinctrl: aw9523: Make the driver tristate
pinctrl: nomadik: fix dereference of error pointer
gpio: nomadik: Back out some managed resources
pinctrl: aw9523: Add proper terminator
pinctrl: core: comment that pinctrl_add_gpio_range() is deprecated
pinctrl: pinmux: Suppress error message for -EPROBE_DEFER
pinctrl: Add driver for Awinic AW9523/B I2C GPIO Expander
dt-bindings: pinctrl: Add bindings for Awinic AW9523/AW9523B
gpio: nomadik: Finish conversion to use firmware node APIs
gpio: nomadik: fix Kconfig dependencies inbetween pinctrl & GPIO
pinctrl: da9062: Add OF table
dt-bindings: pinctrl: at91: add sam9x7
pinctrl: ocelot: remove redundant assignment to variable ret
gpio: nomadik: grab optional reset control and deassert it at probe
gpio: nomadik: support mobileye,eyeq5-gpio
gpio: nomadik: handle variadic GPIO count
gpio: nomadik: support shared GPIO IRQs
...
Serialization rework:
- use SRCU to serialize access to the global GPIO device list, to GPIO device
structs themselves and to GPIO descriptors
- make the GPIO subsystem resilient to the GPIO providers being unbound while
the API calls are in progress
- don't dereference the SRCU-protected chip pointer if the information we need
can be obtained from the GPIO device structure
- move some of the information contained in struct gpio_chip to struct
gpio_device to further reduce the need to dereference the former
- pass the GPIO device struct instead of the GPIO chip to sysfs callback to,
again, reduce the need for accessing the latter
- get GPIO descriptors from the GPIO device, not from the chip for the same
reason
- allow for mostly lockless operation of the GPIO driver API: assure
consistency with SRCU and atomic operations
- remove the global GPIO spinlock
- remove the character device RW semaphore
Core GPIOLIB:
- constify pointers in GPIO API where applicable
- unify the GPIO counting APIs for ACPI and OF
- provide a macro for iterating over all GPIOs, not only the ones that are
requested
- remove leftover typedefs
- pass the consumer device to GPIO core in devm_fwnode_gpiod_get_index() for
improved logging
- constify the GPIO bus type
- don't warn about removing GPIO chips with descriptors still held by users as
we can now handle this situation gracefully
- remove unused logging helpers
- unexport functions that are only used internally in the GPIO subsystem
- set the device type (assign the relevant struct device_type) for GPIO devices
New drivers:
- add the ChromeOS EC GPIO driver
Driver improvements:
- allow building gpio-vf610 with COMPILE_TEST as well as disabling it in
menuconfig (before it was always built for i.MX cofigs)
- count the number of EICs using the device properties instead of hard-coding
it in gpio-eic-sprd
- improve the device naming, extend the debugfs output and add lockdep asserts
to gpio-sim
DT bindings:
- document the 'label' property for gpio-pca9570
- convert aspeed,ast2400-gpio bindings to DT schema
- disallow unevaluated properties for gpio-mvebu
- document a new model in renesas,rcar-gpio
Documentation:
- improve the character device kerneldocs in user-space headers
- add proper documentation for the character device uAPI (both v1 and v2)
- move the sysfs and gpio-mockup docs into the "obsolete" section
- improve naming consistency for GPIO terms
- clarify the line values description for sysfs
- minor docs improvements
- improve the driver API contract for setting GPIO direction
- mark unsafe APIs as deprecated in kerneldocs and suggest replacements
Other:
- remove an obsolete test from selftests
-----BEGIN PGP SIGNATURE-----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=LX+L
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The biggest feature is the locking overhaul. Up until now the
synchronization in the GPIO subsystem was broken. There was a single
spinlock "protecting" multiple data structures but doing it wrong (as
evidenced by several places where it would be released when a sleeping
function was called and then reacquired without checking the protected
state).
We tried to use an RW semaphore before but the main issue with GPIO is
that we have drivers implementing the interfaces in both sleeping and
non-sleeping ways as well as user-facing interfaces that can be called
both from process as well as atomic contexts. Both ends converge in
the same code paths that can use neither spinlocks nor mutexes. The
only reasonable way out is to use SRCU and go mostly lockless. To that
end: we add several SRCU structs in relevant places and use them to
assure consistency between API calls together with atomic reads and
writes of GPIO descriptor flags where it makes sense.
This code has spent several weeks in next and has received several
fixes in the first week or two after which it stabilized nicely. The
GPIO subsystem is now resilient to providers being suddenly unbound.
We managed to also remove the existing character device RW semaphore
and the obsolete global spinlock.
Other than the locking rework we have one new driver (for Chromebook
EC), much appreciated documentation improvements from Kent and the
regular driver improvements, DT-bindings updates and GPIOLIB core
tweaks.
Serialization rework:
- use SRCU to serialize access to the global GPIO device list, to
GPIO device structs themselves and to GPIO descriptors
- make the GPIO subsystem resilient to the GPIO providers being
unbound while the API calls are in progress
- don't dereference the SRCU-protected chip pointer if the
information we need can be obtained from the GPIO device structure
- move some of the information contained in struct gpio_chip to
struct gpio_device to further reduce the need to dereference the
former
- pass the GPIO device struct instead of the GPIO chip to sysfs
callback to, again, reduce the need for accessing the latter
- get GPIO descriptors from the GPIO device, not from the chip for
the same reason
- allow for mostly lockless operation of the GPIO driver API: assure
consistency with SRCU and atomic operations
- remove the global GPIO spinlock
- remove the character device RW semaphore
Core GPIOLIB:
- constify pointers in GPIO API where applicable
- unify the GPIO counting APIs for ACPI and OF
- provide a macro for iterating over all GPIOs, not only the ones
that are requested
- remove leftover typedefs
- pass the consumer device to GPIO core in
devm_fwnode_gpiod_get_index() for improved logging
- constify the GPIO bus type
- don't warn about removing GPIO chips with descriptors still held by
users as we can now handle this situation gracefully
- remove unused logging helpers
- unexport functions that are only used internally in the GPIO
subsystem
- set the device type (assign the relevant struct device_type) for
GPIO devices
New drivers:
- add the ChromeOS EC GPIO driver
Driver improvements:
- allow building gpio-vf610 with COMPILE_TEST as well as disabling it
in menuconfig (before it was always built for i.MX cofigs)
- count the number of EICs using the device properties instead of
hard-coding it in gpio-eic-sprd
- improve the device naming, extend the debugfs output and add
lockdep asserts to gpio-sim
DT bindings:
- document the 'label' property for gpio-pca9570
- convert aspeed,ast2400-gpio bindings to DT schema
- disallow unevaluated properties for gpio-mvebu
- document a new model in renesas,rcar-gpio
Documentation:
- improve the character device kerneldocs in user-space headers
- add proper documentation for the character device uAPI (both v1 and v2)
- move the sysfs and gpio-mockup docs into the "obsolete" section
- improve naming consistency for GPIO terms
- clarify the line values description for sysfs
- minor docs improvements
- improve the driver API contract for setting GPIO direction
- mark unsafe APIs as deprecated in kerneldocs and suggest
replacements
Other:
- remove an obsolete test from selftests"
* tag 'gpio-updates-for-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits)
gpio: sysfs: repair export returning -EPERM on 1st attempt
selftest: gpio: remove obsolete gpio-mockup test
gpiolib: Deduplicate cleanup for-loop in gpiochip_add_data_with_key()
dt-bindings: gpio: aspeed,ast2400-gpio: Convert to DT schema
gpio: acpi: Make acpi_gpio_count() take firmware node as a parameter
gpio: of: Make of_gpio_get_count() take firmware node as a parameter
gpiolib: Pass consumer device through to core in devm_fwnode_gpiod_get_index()
gpio: sim: use for_each_hwgpio()
gpio: provide for_each_hwgpio()
gpio: don't warn about removing GPIO chips with active users anymore
gpio: sim: delimit the fwnode name with a ":" when generating labels
gpio: sim: add lockdep asserts
gpio: Add ChromeOS EC GPIO driver
gpio: constify of_phandle_args in of_find_gpio_device_by_xlate()
gpio: fix memory leak in gpiod_request_commit()
gpio: constify opaque pointer "data" in gpio_device_find()
gpio: cdev: fix a NULL-pointer dereference with DEBUG enabled
gpio: uapi: clarify default_values being logical
gpio: sysfs: fix inverted pointer logic
gpio: don't let lockdep complain about inherently dangerous RCU usage
...
This contains the usual amount of driver and device tree changes.
Additionally there is a big rework of how pwm lowlevel drivers are
registered to prepare adding character device support.
Thanks to Dharma Balasubiramani, Dong Aisheng, Duje Mihanović, Jerome
Brunet, Raag Jadav and Rafał Miłecki for their contributions. And sorry
for those who still need some patience because I didn't manage to empty
my review queue.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmXuyf4ACgkQj4D7WH0S
/k4Yugf+P7gMPuCQJqWLvOyuHjKt4tI3aVsr+jbSiAfbPWaXAQKZunnZ9K17bOI2
JQkDuAi76teNRiVtNEx1ZEdfKe9KgY/Npq8BTmvXxvBktCand8sfhyyRaXYo9FWI
B5qKdp1WIg7ZDMoGQtLRayly4FAsbB0L50SjWmkVIXC2xXp6t6KxxgnOgTM58Oo9
0yYYetF3EOmDQ4J234/muaLbM+1rjajKdw+SgS2mry2WV60SOqo+PQfuK42XjWip
cLDkEgYogwx1MAbFgobtquA7Hvkdb2WyCirTDNZiGIBtmM89kH4Oa8e4IDR6FRqn
w35hJv7sxVjiqBrSMD/lWpJeQ8gPYg==
=6Ixv
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This contains the usual amount of driver and device tree changes.
Additionally there is a big rework of how pwm lowlevel drivers are
registered to prepare adding character device support.
Thanks to Dharma Balasubiramani, Dong Aisheng, Duje Mihanović, Jerome
Brunet, Raag Jadav and Rafał Miłecki for their contributions. And
sorry for those who still need some patience because I didn't manage
to empty my review queue"
* tag 'pwm/for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (185 commits)
pwm: imx-tpm: fix probe crash due to access registers without clock
pwm: meson: generalize 4 inputs clock on meson8 pwm type
dt-bindings: pwm: amlogic: Add a new binding for meson8 pwm types
dt-bindings: pwm: amlogic: fix s4 bindings
pwm: dwc: simplify error handling
pwm: dwc: Add 16 channel support for Intel Elkhart Lake
pwm: dwc: drop redundant error check
staging: greybus: pwm: Make use of devm_pwmchip_alloc() function
staging: greybus: pwm: Rework how the number of PWM lines is determined
staging: greybus: pwm: Drop unused gb_connection_set_data()
staging: greybus: pwm: Rely on pwm framework to pass a valid hwpwm
staging: greybus: pwm: Make use of pwmchip_parent() accessor
staging: greybus: pwm: Change prototype of helpers to prepare further changes
leds: qcom-lpg: Make use of devm_pwmchip_alloc() function
drm/bridge: ti-sn65dsi86: Make use of devm_pwmchip_alloc() function
drm/bridge: ti-sn65dsi86: Make use of pwmchip_parent() accessor
gpio: mvebu: Make use of devm_pwmchip_alloc() function
pwm: xilinx: Make use of devm_pwmchip_alloc() function
pwm: xilinx: Prepare removing pwm_chip from driver data
pwm: vt8500: Make use of devm_pwmchip_alloc() function
...
When `CONFIG_DEBUG_FS` is disabled, nmk_gpio_dbg_show_one() is an
empty dummy function; this however triggers a `-Wmissing-prototypes`
warning and later a linker error because the function is also used by
drivers/pinctrl/nomadik/pinctrl-nomadik.c, therefore it needs to be
non-static.
To allow both sources to access this dummy function, this patch moves
it to the header, adding the `#ifdef CONFIG_DEBUG_FS` there as well.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/20240311133223.3429428-1-max.kellermann@ionos.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Using BUG_ON() is discouraged and also the check wasn't done early
enough to prevent an out of bounds access. Check earlier and return
an error instead of calling BUG().
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/ae643df0-3a3e-4270-8dbf-be390ee4b478@moroto.mountain
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It would make sense to return -EPERM if the bit was already set (already
used), not if it was cleared. Before this fix pins can only be exported on
the 2nd attempt:
$ echo 522 > /sys/class/gpio/export
sh: write error: Operation not permitted
$ echo 522 > /sys/class/gpio/export
Fixes: 35b545332b ("gpio: remove gpio_lock")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Several commits introduce managed resources (devm_*) into the
nmk_gpio_populate_chip() function.
This isn't always working because when called from the Nomadik pin
control driver we just want to populate some states for the device as
the same states are used by the pin control driver.
Some managed resources such as devm_kzalloc() etc will work, as the
passed in platform device will be used for lifecycle management,
but in some cases where we used the looked-up platform device
for the GPIO block, this will cause problems for the combined
pin control and GPIO driver, because it adds managed resources
to the GPIO device before it is probed, which is something that
the device core will not accept, and all of the GPIO blocks will
refuse to probe:
platform 8012e000.gpio: Resources present before probing
platform 8012e080.gpio: Resources present before probing
(...)
Fix this by not tying any managed resources to the looked-up
gpio_pdev/gpio_dev device, let's just live with the fact that
these need imperative resource management for now.
Drop in some notes and use a local *dev variable to clarify the
code.
Cc: Théo Lebrun <theo.lebrun@bootlin.com>
Fixes: 12410e9590 ("gpio: nomadik: use devm_platform_ioremap_resource() helper")
Link: https://lore.kernel.org/r/20240305-fix-nomadik-gpio-v2-1-e5d1fbdc3f5c@linaro.org
[Fixed some last minut print formatting]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is no need to repeat for-loop twice in the error path in
gpiochip_add_data_with_key(). Deduplicate it. While at it,
rename loop variable to be more specific and avoid ambguity.
It also properly unwinds the SRCU, i.e. in reversed order of allocating.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Previously driver got a few updates in order to replace OF APIs by
respective firmware node, however it was not finished to the logical
end, e.g., some APIs that has been used are still require OF node
to be passed. Finish that job by converting leftovers to use firmware
node APIs.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240302173401.217830-1-andy.shevchenko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Hogs are added *after* ACPI so should be removed *before* in error path.
Fixes: a411e81e61 ("gpiolib: add hogs support for machine code")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Make acpi_gpio_count() take firmware node as a parameter in order
to be aligned with other functions and decouple from unused device
pointer. The latter helps to create a common fwnode_gpio_count()
in the future.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Make of_gpio_get_count() take firmware node as a parameter in order
to be aligned with other functions and decouple from unused device
pointer. The latter helps to create a common fwnode_gpio_count()
in the future.
While at it, rename to be of_gpio_count() to be aligned with the others.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
After shuffling the code, error path wasn't updated correctly.
Fix it here.
Fixes: 2f4133bb5f ("gpiolib: No need to call gpiochip_remove_pin_ranges() twice")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Chip outputs are enabled[1] before actual reset is performed[2] which might
cause pin output value to flip flop if previous pin value was set to 1.
Fix that behavior by making sure chip is fully reset before all outputs are
enabled.
Flip-flop can be noticed when module is removed and inserted again and one of
the pins was changed to 1 before removal. 100 microsecond flipping is
noticeable on oscilloscope (100khz SPI bus).
For a properly reset chip - output is enabled around 100 microseconds (on 100khz
SPI bus) later during probing process hence should be irrelevant behavioral
change.
Fixes: 7ebc194d0f (gpio: 74x164: Introduce 'enable-gpios' property)
Link: https://elixir.bootlin.com/linux/v6.7.4/source/drivers/gpio/gpio-74x164.c#L130 [1]
Link: https://elixir.bootlin.com/linux/v6.7.4/source/drivers/gpio/gpio-74x164.c#L150 [2]
Signed-off-by: Arturas Moskvinas <arturas.moskvinas@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Fetch a reference to the optional shared reset control and deassert it
if it exists.
Optional because not all platforms that use this driver have a reset
attached to the reset block. Shared because some platforms that use the
reset (at least Mobileye EyeQ5) share the reset across banks.
Do not keep a reference to the reset control as it is not needed
afterwards; the driver does not handle suspend, does not use runtime
PM, does not register a remove callback and does not support unbinding
from sysfs (made explicit with suppress_bind_attrs).
The operation is done in nmk_gpio_populate_chip(). This function is
called by either gpio-nomadik or pinctrl-nomadik, whoever comes first.
This is here for historic reasons and could probably be removed now; it
seems gpio-ranges enforces the ordering to be pinctrl-first. It is not
the topic of the present patch however.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-25-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We create a custom compatible for the STA2X11 IP block as integrated
into the Mobileye EyeQ5 platform. Its wake and alternate functions have
been disabled, we want to avoid touching those registers.
We both do: (1) early return in functions that do not support the
platform, but with warnings, and (2) avoid calling those functions in
the first place.
We ensure that pinctrl-nomadik is not used with this STA2X11 variant.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-24-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Read the "ngpios" property to determine the number of GPIOs for a bank.
If not available, fallback to NMK_GPIO_PER_CHIP ie 32 ie the current
behavior.
The IP block always supports 32 GPIOs, but platforms can expose a lesser
amount. The Mobileye EyeQ5 is in this case; one bank is 29 GPIOs and
the other is 23.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-23-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Support a single IRQs used by multiple GPIO banks. Change the IRQ
handler type from a chained handler (as used by gpiolib
for ->parent_handler) to a threaded IRQ.
Use the generic_handle_domain_irq_safe() helper. The non-safe version
must be called in a no-IRQ context.
The Mobileye EyeQ5 platform uses this GPIO controller and share an IRQ
for its two banks.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-22-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This GPIO driver is historically related to the Nomadik platform. It
however can be used by others as it implements the ST STA2X11 IP block.
Pick a less ambiguous name for it.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-21-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Not all platforms using this platform driver expose a clock for this
GPIO controller. Turn devm_clk_get() into devm_clk_get_optional() to
avoid failing when no clocks are provided.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-20-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Move away from statically allocated GPIO IDs. Switch to dynamic ID
allocation. Static IDs are deprecated because they cause issues when
multiple GPIO controllers are to be found on the same platform.
Add a bit of complexity to do pin number -> GPIO chip + offset.
Previously, bank number and offsets were retrieved using division and
remainder (bank size being constant 32). Now, to get the pin number
matching a bank base, we must know the sum of ngpios of previous banks.
This is done in find_nmk_gpio_from_pin() which also exposes the offset
inside the bank.
Also remove the assumption that bank sizes are constant. Instead of
using NMK_GPIO_PER_CHIP as bank size, use nmk_gpio_chips[i]->ngpio.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-19-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Replace call to clk_get() by call to devm_clk_get(). Allow automatic
cleanup of the clock in case of probe error.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-18-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Replace calls to platform_get_resource() then devm_ioremap_resource() by
a single call to devm_platform_ioremap_resource().
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-17-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Avoid OF APIs in the GPIO subsystem. Here, replace
of_find_device_by_node() call by bus_find_device_by_of_node().
The new helper returns a struct device pointer. Store it in a new local
variable and use it down the road.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-15-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Previously, drivers/pinctrl/nomadik/pinctrl-nomadik.c registered two
platform drivers: pinctrl & GPIO. Move the GPIO aspect to the
drivers/gpio/ folder, as would be expected.
Both drivers are intertwined for a reason; pinctrl requires access to
GPIO registers for pinmuxing, pull-disable, disabling interrupts while
setting the muxing and wakeup control. Information sharing is done
through a shared array containing GPIO chips and a few helper
functions. That shared array is not touched from gpio-nomadik when
CONFIG_PINCTRL_NOMADIK is not defined.
Make no change to the code that moved into gpio-nomadik; there should be
no behavior change following. A few functions are shared and header
comments are added. Checkpatch warnings are addressed. NUM_BANKS is
renamed to NMK_MAX_BANKS.
It is supported to compile gpio-nomadik without pinctrl-nomadik. The
opposite is not true.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-6-3ba757474006@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This devm API takes a consumer device as an argument to setup the devm
action, but throws it away when calling further into gpiolib. This leads
to odd debug messages like this:
(NULL device *): using DT '/gpio-keys/switch-pen-insert' for '(null)' GPIO lookup
Let's pass the consumer device down, by directly calling what
fwnode_gpiod_get_index() calls but pass the device used for devm. This
changes the message to look like this instead:
gpio-keys gpio-keys: using DT '/gpio-keys/switch-pen-insert' for '(null)' GPIO lookup
Note that callers of fwnode_gpiod_get_index() will still see the NULL
device pointer debug message, but there's not much we can do about that
because the API doesn't take a struct device.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 8eb1f71e7a ("gpiolib: consolidate GPIO lookups")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Display debugfs information about all simulated GPIOs, not only the
requested ones.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
With SRCU we can now correctly handle the situation when a GPIO provider
is removed while having users still holding references to GPIO
descriptors. Remove all warnings emitted in this situation.
Suggested-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Typically, whenever a human-readable name is created for objects using
a software node, its name is delimited with ":" as dashes are often used
in other parts of the name. Make gpio-sim use the same pattern. This
results in better looking default names:
gpio-sim.0:node0
gpio-sim.0:node1
gpio-sim.1:node0
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
We have three functions in gpio-sim that are called with the device lock
already held. We use the "_unlocked" suffix in their names to indicate
that. This has proven to be confusing though as the naming convention in
the kernel varies between using "_locked" or "_unlocked" for this
purpose. Naming convention also doesn't enforce anything. Let's remove
the suffix and add lockdep annotation at the top of these functions.
This makes it clear the function requires a lock to be held (and which
one specifically!) as well as results in a warning if it's not the case.
The only place where the information is lost is the place where the
function is called but the caller doesn't care about that information
anyway.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The ChromeOS embedded controller (EC) supports setting the state of
GPIOs when the system is unlocked, and getting the state of GPIOs in all
cases. The GPIOs are on the EC itself, so the EC acts similar to a GPIO
expander. Add a driver to get and set the GPIOs on the EC through the
host command interface.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Similar to gpiochip_generic_request() and gpiochip_generic_free() the
gpiochip_generic_config() function needs to handle the case where there
are no pinctrl pins mapped to the GPIOs, usually through the gpio-ranges
device tree property.
Commit f34fd6ee1b ("gpio: dwapb: Use generic request, free and
set_config") set the .set_config callback to gpiochip_generic_config()
in the dwapb GPIO driver so the GPIO API can set pinctrl configuration
for the corresponding pins. Most boards using the dwapb driver do not
set the gpio-ranges device tree property though, and in this case
gpiochip_generic_config() would return -EPROPE_DEFER rather than the
previous -ENOTSUPP return value. This in turn makes
gpio_set_config_with_argument_optional() fail and propagate the error to
any driver requesting GPIOs.
Fixes: 2956b5d94a ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Reported-by: Jisheng Zhang <jszhang@kernel.org>
Closes: https://lore.kernel.org/linux-gpio/ZdC_g3U4l0CJIWzh@xhacker/
Tested-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Pointer to the struct of_phandle_args can be made const after
gpio_device_find() arguments got constified. This should be part of
commit 4a92857d6e ("gpio: constify opaque pointer "data" in
gpio_device_find()").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The opaque pointer "data" in each match function used by
gpio_device_find() is a pointer to const, thus the same argument passed
to gpio_device_find() can adjusted similarly.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We are actually passing the gc pointer to chip_dbg() so we have to
srcu_dereference() it.
Fixes: 8574b5b476 ("gpio: cdev: use correct pointer accessors with SRCU")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/lkml/179caa10-5f86-4707-8bb0-fe1b316326d6@samsung.com/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
There are two legacy, deprecated functions - gpiod_to_chip() and
gpio_device_get_chip() - that still have users in tree. They return the
address of the SRCU-protected chip outside of the read-only critical
sections. They are inherently dangerous and the users should convert to
safer alternatives. Let's explicitly silence lockdep warnings by using
rcu_dereference_check(ptr, 1). While at it: reuse
gpio_device_get_chip() in gpiod_to_chip().
Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Lockdep with CONFIG_PROVE_RCU enabled reports false positives about
suspicious rcu_dereference() usage. Let's silence it by using
srcu_dereference() which is the correct helper with SRCU.
Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
We never dereference the chip pointer in character device code so we can
use the lighter rcu_access_pointer() helper. This also makes lockep
happier as it no longer complains about suspicious rcu_dereference()
usage.
Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
gpiod_hog() may be called without the gpio_device SRCU read lock taken
so we need to do it here as well. It's alright if someone else is
already holding the lock as SRCU read critical sections can be nested.
Fixes: d83cee3d2b ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122234.d85cca9b-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
In certain situations we may end up taking the GPIO descriptor SRCU read
lock in of_gpiochip_add() before the SRCU struct is initialized. Move
the initialization before the call to of_gpiochip_add().
Fixes: be711caa87 ("gpio: add SRCU infrastructure to struct gpio_desc")
Fixes: 1f2bcb8c8c ("gpio: protect the descriptor label with SRCU")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202402122228.e607a080-lkp@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We still have some functions that return the address of the GPIO chip
associated with the GPIO device. This is dangerous and the users should
find a better solution. Let's add appropriate comments to the kernel
docs.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
With all accesses to gdev->chip being protected with SRCU, we can now
remove the RW-semaphore specific to the character device which
fulfilled the same role up to this point.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Ensure we cannot crash if the GPIO device gets unregistered (and the
chip pointer set to NULL) during any of the API calls.
To that end: wait for all users of gdev->chip to exit their read-only
SRCU critical sections in gpiochip_remove().
For brevity: add a guard class which can be instantiated at the top of
every function requiring read-only access to the chip pointer and use it
in all API calls taking a GPIO descriptor as argument. In places where
we only deal with the GPIO device - use regular guard() helpers and
rcu_dereference() for chip access. Do the same in API calls taking a
const pointer to gpio_desc.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add the SRCU struct to GPIO device. It will be used to serialize access
to the GPIO chip pointer. Initialize and clean it up where applicable.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Duplicating the can_sleep value in GPIO device will allow us to not
needlessly dereference the chip pointer in several places and reduce the
number of SRCU read-only critical sections.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We don't need to check the gdev pointer in struct gpio_desc - it's
always assigned and never cleared. It's also pointless to check
gdev->chip before we actually serialize access to it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Checking desc->gdev->chip for NULL without holding it in place with some
serializing mechanism is pointless. Remove this check. Also don't check
desc->gdev for NULL as it can never happen. We'll be protecting
gdev->chip with SRCU soon but we will provide a dedicated, automatic
class for that.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We don't need to dereference gdev->chip in gpiochip_setup_dev() as at
the time it's called, the label in the associated struct gpio_device is
already set.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Don't dereference gdev->chip if the same information can be obtained
from struct gpio_device.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The variable holding the number of GPIO lines is duplicated in GPIO
device so read it instead of unnecessarily dereferencing the chip
pointer.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
gpio_device_get_desc() is the safer alternative to gpiochip_get_desc().
As we don't really need to dereference the chip pointer to retrieve the
descriptors in character device code, let's use it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We're working towards protecting the chip pointer in struct gpio_device
with SRCU. In order to use it in sysfs callbacks we must pass the pointer
to the GPIO device that wraps the chip instead of the address of the
chip itself as the user data.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Checking the gdev->mockdev pointer for NULL must be part of the critical
section.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We now removed the gpio_lock spinlock and modified the places
previously protected by it to handle desc->flags access in a consistent
way. Let's improve other places that were previously unprotected by
reading the flags field of gpio_desc once and using the stored value for
logic consistency. If we need to modify the field, let's also write it
back once with a consistent value resulting from the function's logic.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The "multi-function" gpio_lock is pretty much useless with how it's used
in GPIOLIB currently. Because many GPIO API calls can be called from all
contexts but may also call into sleeping driver callbacks, there are
many places with utterly broken workarounds like yielding the lock to
call a possibly sleeping function and then re-acquiring it again without
taking into account that the protected state may have changed.
It was also used to protect several unrelated things: like individual
descriptors AND the GPIO device list. We now serialize access to these
two with SRCU and so can finally remove the spinlock.
There is of course the question of consistency of lockless access to
GPIO descriptors. Because we only support exclusive access to GPIOs
(officially anyway, I'm looking at you broken
GPIOD_FLAGS_BIT_NONEXCLUSIVE bit...) and the API contract with providers
does not guarantee serialization, it's enough to ensure we cannot
accidentally dereference an invalid pointer and that the state we present
to both users and providers remains consistent. To achieve that: read the
flags field atomically except for a few special cases. Read their current
value before executing callback code and use this value for any subsequent
logic. Modifying the flags depends on the particular use-case and can
differ. For instance: when requesting a GPIO, we need to set the
REQUESTED bit immediately so that the next user trying to request the
same line sees -EBUSY.
While at it: the allocations that used GFP_ATOMIC until this point can
now switch to GFP_KERNEL.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
With the list of GPIO devices now protected with SRCU we can use
gpio_device_find() to traverse it from sysfs.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In order to ensure that the label is not freed while it's being
accessed, let's protect it with SRCU and synchronize it everytime it's
changed.
Let's modify desc_set_label() to manage the memory used for the label as
it can only be freed once synchronize_srcu() returns.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Extend the GPIO descriptor with an SRCU structure in order to serialize
the access to the label. Initialize and clean it up where applicable.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We will soon serialize access to the descriptor label using SRCU. The
write-side of the protection will require calling synchronize_srcu()
which must not be called from atomic context. We have two irq helpers:
gpiochip_lock_as_irq() and gpiochip_unlock_as_irq() that set the label
if the GPIO is not requested but is being used as interrupt. They are
called with a spinlock held from the interrupt subsystem.
They must not do it if we are to use SRCU so instead let's move the
special corner case to a dedicated getter.
Don't actually set the label to "interrupt" in the above case but rather
use the newly added gpiod_get_label() helper to hide the logic that
atomically checks the descriptor flags and returns the address of a
static "interrupt" string.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We will soon serialize access to the descriptor label using SRCU. The
write-side of the protection will require calling synchronize_srcu()
which must not be called from atomic context. We have two irq helpers:
gpiochip_lock_as_irq() and gpiochip_unlock_as_irq() that set the label
if the GPIO is not requested but is being used as interrupt. They are
called with a spinlock held from the interrupt subsystem.
They must not do it if we are to use SRCU so instead let's move the
special corner case to a dedicated getter.
First: let's implement and use the getter where it's applicable.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The general rule of the kernel is to not provide symbols that have no
users upstream. Let's remove logging helpers that are not used anywhere.
This will save us work later when we'll be modifying them to use the
upcoming SRCU infrastructure.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The device nodes representing GPIO hogs cannot be deleted without
unregistering the GPIO chip so there's no need to serialize their access.
However we must ensure that users can get the right address so write and
read it atomically.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We're working towards removing the "multi-function" GPIO spinlock that's
implemented terribly wrong. We tried using an RW-semaphore to protect
the list of GPIO devices but it turned out that we still have old code
using legacy GPIO calls that need to translate the global GPIO number to
the address of the associated descriptor and - to that end - traverse
the list while holding the lock. If we change the spinlock to a sleeping
lock then we'll end up with "scheduling while atomic" bugs.
Let's allow lockless traversal of the list using SRCU and only use the
mutex when modyfing the list.
While at it: let's protect the period between when we start the lookup
and when we finally request the descriptor (increasing the reference
count of the GPIO device) with the SRCU read lock.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The match function used in gpio_device_find() should not modify the
contents of passed opaque pointer, because such modification would not
be necessary for actual matching and it could lead to quite unreadable,
spaghetti code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[Bartosz: fix coding style in header]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmXJK4UeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGHsYH/jKmzKXDRsBCcw/Q
HGUvFtpohWBOpN6efdf0nxilQisuyQrqKB9fnwvfcdE60VpqMJXFMdlFh/fonxPl
JMbpk9y5uw48IJZA43NwTxUrjZ4wyWzv4ZF6YWa+5WdTAJpPLEPhhnLxcHOKklMr
5Cm/7B/M7eB2BXBfc45b1pkKN22q9OXvjaKxZ+5wYmiMxS+GC8l8jiJ/WlHX78PR
eLgsa1v732f2D7YF75wVhaoYepR+QzA9wTKqhjMNCEaVc2PQhA2JRsBXEt84qEIa
FZigmf7LLc4ed9YA2XjRBZhAehe3cZVJZ1lasW37IATS921La2WfKuiysICJOtyT
bGjK8tk=
=Pt7W
-----END PGP SIGNATURE-----
Merge tag 'v6.8-rc4' into gpio/for-next
Linux 6.8-rc4
Pulling this for a bugfix upstream with which the gpio/for-next branch
conflicts.
It's useful to have the device type information for those sub-devices
that are actually GPIO chips registered with GPIOLIB. While at it: use
the device type struct to setup the release callback which is the
preferred way to use the device API.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 48e1b4d369 ("gpiolib: remove the GPIO device from the list
when it's unregistered") we remove the GPIO device entry from the global
list (used to order devices by their GPIO ranges) when unregistering the
chip, not when releasing the device. It will not happen when the last
reference is put anymore. This means, we need to remove it in error path
in gpiochip_add_data_with_key() unconditionally, without checking if the
device's .release() callback is set.
Fixes: 48e1b4d369 ("gpiolib: remove the GPIO device from the list when it's unregistered")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Now that the driver core can properly handle constant struct bus_type,
move the gpio_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Enable COMPILE_TEST for the vf610 gpio driver to support test builds on
systems without this hardware.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The vf610 gpio driver is enabled by default for all i.MX machines,
without any option to disable it in a board-specific config file.
Most i.MX chipsets have no hardware for this driver. Change the default
to enable GPIO_VF610 for SOC_VF610 and disable it otherwise.
Add a text description after the bool type, this makes the driver
selectable by make config etc.
Fixes: 30a35c07d9 ("gpio: vf610: drop the SOC_VF610 dependency for GPIO_VF610")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There are no external users for the irq domain helpers so unexport them
and remove the prototypes from the driver header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The locking wrappers were replaces with lock guards. These typedefs are
no longer needed.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
The raw interrupt status of eic maybe set before the interrupt is enabled,
since the eic interrupt has a latch function, which would trigger the
interrupt event once enabled it from user side. To solve this problem,
interrupts generated before setting the interrupt trigger type are ignored.
Fixes: 25518e024e ("gpio: Add Spreadtrum EIC driver support")
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The num_eics is a default value, but some SoCs support more than 8.
In order to adapt to all projects, the total number of eics is
automatically calculated through dts.
Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Spurious wakeups are reported on the GPD G1619-04 which
can be absolved by programming the GPIO to ignore wakeups.
Cc: stable@vger.kernel.org
Reported-and-tested-by: George Melikov <mail@gmelikov.ru>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3073
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We've recently had someone try to use of_get_named_gpio() in new code.
Mark legacy interfaces as deprecated in kernel docs to avoid any
confusion.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
- revert the changes aiming to use a read-write semaphore to protect the
list of GPIO devices due to calls to legacy API taking that lock from
atomic context in old code
- fix inverted logic in DEFINE_FREE() for GPIO device references
- check the return value of bgpio_init() in gpio-mlxbf3
- fix node address in the DT bindings example for gpio-xilinx
- fix signedness bug in gpio-rtd
- fix kernel-doc warnings in gpio-en7523
-----BEGIN PGP SIGNATURE-----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=g2QY
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Apart from some regular driver fixes there's a relatively big revert
of the locking changes that were introduced to GPIOLIB in this merge
window.
This is because it turned out that some legacy GPIO interfaces - that
need to translate a number from the global GPIO numberspace to the
address of the relevant descriptor, thus running a GPIO device lookup
and taking the GPIO device list lock - are still used in old code from
atomic context resulting in "scheduling while atomic" errors.
I'll try to make the read-only part of the list access entirely
lockless using SRCU but this will take some time so let's go back to
the old global spinlock for now.
Summary:
- revert the changes aiming to use a read-write semaphore to protect
the list of GPIO devices due to calls to legacy API taking that
lock from atomic context in old code
- fix inverted logic in DEFINE_FREE() for GPIO device references
- check the return value of bgpio_init() in gpio-mlxbf3
- fix node address in the DT bindings example for gpio-xilinx
- fix signedness bug in gpio-rtd
- fix kernel-doc warnings in gpio-en7523"
* tag 'gpio-fixes-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: revert the attempt to protect the GPIO device list with an rwsem
gpio: EN7523: fix kernel-doc warnings
gpiolib: Fix scope-based gpio_device refcounting
gpio: mlxbf3: add an error code check in mlxbf3_gpio_probe
dt-bindings: gpio: xilinx: Fix node address in gpio
gpio: rtd: Fix signedness bug in probe
- Add support for Monolithic Power Systems MP3309C WLED Step-up Converter
- Fix-ups
- Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations
- Device Tree Binding updates
- Demote non-kerneldoc header comments
- Improve error handling; return proper error values, simplify, avoid duplicates, etc
- Convert over to the new (kinda) GPIOD API
- Bug Fixes
- Fix uninitialised local variable
-----BEGIN PGP SIGNATURE-----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=SXS0
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Drivers:
- Add support for Monolithic Power Systems MP3309C WLED Step-up Converter
Fix-ups:
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
- Device Tree Binding updates
- Demote non-kerneldoc header comments
- Improve error handling; return proper error values, simplify, avoid
duplicates, etc
- Convert over to the new (kinda) GPIOD API
Bug Fixes:
- Fix uninitialised local variable"
* tag 'backlight-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: hx8357: Convert to agnostic GPIO API
backlight: ili922x: Add an error code check in ili922x_write()
backlight: ili922x: Drop kernel-doc for local macros
backlight: mp3309c: Fix uninitialized local variable
backlight: pwm_bl: Use dev_err_probe
backlight: mp3309c: Add support for MPS MP3309C
dt-bindings: backlight: mp3309c: Remove two required properties
This reverts commits 1979a28075 ("gpiolib: replace the GPIO device
mutex with a read-write semaphore") and 65a828bab1 ("gpiolib: use
a mutex to protect the list of GPIO devices").
Unfortunately the legacy GPIO API that's still used in older code has to
translate numbers from the global GPIO numberspace to descriptors. This
results in a GPIO device lookup in every call to legacy functions. Some
of those functions - like gpio_set/get_value() - can be called from
atomic context so taking a sleeping lock that is an RW semaphore results
in an error.
We'll probably have to protect this list with SRCU.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-wireless/f7b5ff1e-8f34-4d98-a7be-b826cb897dc8@moroto.mountain/
Fixes: 1979a28075 ("gpiolib: replace the GPIO device mutex with a read-write semaphore")
Fixes: 65a828bab1 ("gpiolib: use a mutex to protect the list of GPIO devices")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add "struct" keyword and explain the @dir array differently to
prevent kernel-doc warnings:
gpio-en7523.c:22: warning: cannot understand function prototype: 'struct airoha_gpio_ctrl '
gpio-en7523.c:27: warning: Function parameter or struct member 'dir' not described in 'airoha_gpio_ctrl'
gpio-en7523.c:27: warning: Excess struct member 'dir0' description in 'airoha_gpio_ctrl'
gpio-en7523.c:27: warning: Excess struct member 'dir1' description in 'airoha_gpio_ctrl'
Fixes: 0868ad385a ("gpio: Add support for Airoha EN7523 GPIO controller")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Clang static checker warning: Value stored to 'ret' is never read.
bgpio_init() returns error code if failed, it's better to add this
check.
Fixes: cd33f216d2 ("gpio: mlxbf3: Add gpio driver support")
Signed-off-by: Su Hui <suhui@nfschina.com>
[Bartosz: add the Fixes: tag]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The "data->irqs[]" array holds unsigned int so this error handling will
not work correctly.
Fixes: eee636bff0 ("gpio: rtd: Add support for Realtek DHC(Digital Home Center) RTD SoCs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There are only two spots where we modify (add to or remove objects from)
the GPIO device list. Readers should be able to access it concurrently.
Replace the mutex with a read-write semaphore and adjust the locking
operations accordingly.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
If we wait until the GPIO device's .release() callback gets invoked
before we remove it from the global device list, then we risk that
someone will look it up using gpio_device_find() between where we
dropped the last reference and before .release() is done taking a
reference again to an object that's being released.
The device must be removed when it's being unregistered - just like how
we remove it from the GPIO bus.
Fixes: ff2b135922 ("gpio: make the gpiochip a real device")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Add Nuvoton BMC NPCM7xx/NPCM8xx sgpio driver support.
Nuvoton NPCM SGPIO module is combine serial to parallel IC (HC595)
and parallel to serial IC (HC165), and use APB3 clock to control it.
This interface has 4 pins (D_out , D_in, S_CLK, LDSH).
BMC can use this driver to increase 64 GPI pins and 64 GPO pins to use.
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
A bank PMIC EIC contains 16 EICs, and the operating registers
are BIT0-BIT15, such as BIT0 of the register operated by EIC0.
Using the one-dimensional array reg[CACHE_NR_REGS] for maintenance
will cause the configuration of other EICs to be affected when
operating a certain EIC. In order to solve this problem, configure
the bit corresponding to the EIC through offset.
Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
Reviewed-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This way GPIO will be denied on pins already claimed by other devices
and basic pin configuration (pull-up, pull-down etc.) can be done
through the userspace GPIO API.
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Older code has an annoying habit of putting tabs between the type and the
name of the variable. This doesn't really add to readability and newer
code doesn't do it so make the entire file consistent.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Older code has an annoying habit of putting tabs between the type and the
name of the variable. This doesn't really add to readability and newer
code doesn't do it so make the entire file consistent.
While at it: convert 'unsigned' to 'unsigned int'.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
extra_checks is only used in a few places. It also depends on
a non-standard DEBUG define one needs to add to the source file. The
overhead of removing it should be minimal (we already use pure
might_sleep() in the code anyway) so drop it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
CONFIG_DEBUG_GPIO should only be used to enable debug log messages and
for core GPIOLIB debugging. Don't use it to control the execution of
potentially buggy code. Just put it under an always-false #if.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the wrapping functions that inhibit removal of the gpio chip
with equivalent guards.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
After the adoption of guard(), the locking wrappers that hold the
config_mutex for linereq_set_values() and linereq_set_config() no
longer add value, so combine them into the functions they wrap.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The size of struct linereq may exceed a page, so allocate space for
it using kvzalloc() instead of kzalloc() to handle the case where
memory is heavily fragmented and kzalloc() cannot find a sufficient
contiguous region.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct_size() is used to calculate struct linereq size, so explicitly
include overflow.h.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In the hardware implementation of the I2C HID driver based on DesignWare
GPIO IRQ chip, when the user continues to use the I2C HID device in the
suspend process, the I2C HID interrupt will be masked after the resume
process is finished.
This is because the disable_irq()/enable_irq() of the DesignWare GPIO
driver does not synchronize the IRQ mask register state. In normal use
of the I2C HID procedure, the GPIO IRQ irq_mask()/irq_unmask() functions
are called in pairs. In case of an exception, i2c_hid_core_suspend()
calls disable_irq() to disable the GPIO IRQ. With low probability, this
causes irq_unmask() to not be called, which causes the GPIO IRQ to be
masked and not unmasked in enable_irq(), raising an exception.
Add synchronization to the masked register state in the
dwapb_irq_enable()/dwapb_irq_disable() function. mask the GPIO IRQ
before disabling it. After enabling the GPIO IRQ, unmask the IRQ.
Fixes: 7779b34556 ("gpio: add a driver for the Synopsys DesignWare APB GPIO block")
Cc: stable@kernel.org
Co-developed-by: Riwen Lu <luriwen@kylinos.cn>
Signed-off-by: Riwen Lu <luriwen@kylinos.cn>
Signed-off-by: xiongxin <xiongxin@kylinos.cn>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
While the GPIO cdev gpio_ioctl() call is in progress, the kernel can
call gpiochip_remove() which will set gdev->chip to NULL, after which
any subsequent access will cause a crash.
gpio_ioctl() was overlooked by the previous fix to protect syscalls
(bdbbae241a), so add protection for that.
Fixes: bdbbae241a ("gpiolib: protect the GPIO device against being dropped while in use by user-space")
Fixes: d7c51b47ac ("gpio: userspace ABI for reading/writing GPIO lines")
Fixes: 3c0d9c635a ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL")
Fixes: aad955842d ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reduce the time holding the gpio_lock by snapshotting the desc flags,
rather than testing them individually while holding the lock.
Accept that the calculation of the used field is inherently racy, and
only check the availability of the line from pinctrl if other checks
pass, so avoiding the check for lines that are otherwise in use.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add documentation of the algorithm used to perform scatter/gather
of the requested lines and values in linereq_get_values() and
linereq_set_values_unlocked() to improve maintainability.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use guard() or scoped_guard() for critical sections rather than
discrete lock/unlock pairs.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
cdev is the only user of the debounce_period_us field in
struct gpio_desc, and it no longer uses it, so remove it.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Store the debounce period for a requested line locally, rather than in
the debounce_period_us field in the gpiolib struct gpio_desc.
Add a global tree of lines containing supplemental line information
to make the debounce period available to be reported by the
GPIO_V2_GET_LINEINFO_IOCTL and the line change notifier.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
* Use RAII for locking in the Tangier family of drivers (Raag)
* Update Tangier family of drivers to use new PM helpers (Raag)
The following is an automated git shortlog grouped by driver:
elkhartlake:
- reuse pm_ops from Intel Tangier driver
tangier:
- simplify locking using cleanup helpers
- unexport suspend/resume handles
- use EXPORT_NS_GPL_SIMPLE_DEV_PM_OPS() helper
-----BEGIN PGP SIGNATURE-----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=TW/S
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.8-1
* Use RAII for locking in the Tangier family of drivers (Raag)
* Update Tangier family of drivers to use new PM helpers (Raag)
The following is an automated git shortlog grouped by driver:
elkhartlake:
- reuse pm_ops from Intel Tangier driver
tangier:
- simplify locking using cleanup helpers
- unexport suspend/resume handles
- use EXPORT_NS_GPL_SIMPLE_DEV_PM_OPS() helper
There is a few things done:
- include only the headers we are direct user of
- add missing headers
- group generic headers and subsystem headers
- sort each group alphabetically
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The global list of GPIO devices is never modified or accessed from
atomic context so it's fine to protect it using a mutex. Add a new
global lock dedicated to the gpio_devices list and use it whenever
accessing or modifying it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Rename two functions that read or modify the global GPIO device list but
don't take the lock themselves (and need to be called with it already
acquired). Use the _unlocked() suffix which seems to be used quite
consistently across the kernel despite there also existing the _locked()
suffix for the same purpose.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The irqchip field has been removed from struct xgpio_instance so remove
the doc as well.
Fixes: b4510f8fd5 ("gpio: xilinx: Convert to immutable irq_chip")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312150239.IyuTVvrL-lkp@intel.com/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
We will eventually switch to protecting the GPIO descriptors with a mutex
but until then, we need to allocate memory for the label copy atomically
while we're holding the global spinlock.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-gpio/62588146-eed6-42f7-ba26-160226b109fe@moroto.mountain/T/#u
Fixes: f8d05e276b ("gpiolib: remove gpiochip_is_requested()")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
The of_gpio.h is going to be removed. In preparation of that convert
the driver to the agnostic API.
Fixes: fbbbcd177a ("gpiolib: of: add quirk for locating reset lines with legacy bindings")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231207161513.3195509-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Provide a custom implementation of the dbg_show() callback that prints
all requested lines together with their label, direction, value and
bias. This improves the code coverage of GPIOLIB.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
- provide a safer alternative to gpiochip_is_requested()
- convert all existing users
- remove gpiochip_is_requested()
-----BEGIN PGP SIGNATURE-----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=PlCm
-----END PGP SIGNATURE-----
Merge tag 'gpio-remove-gpiochip_is_requested-for-v6.8-rc1' into gpio/for-next
gpio: remove gpiochip_is_requested()
- provide a safer alternative to gpiochip_is_requested()
- convert all existing users
- remove gpiochip_is_requested()
We have no external users of gpiochip_is_requested(). Let's remove it
and replace its internal calls with direct testing of the REQUESTED flag.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Use the new gpiochip_dup_line_label() helper to safely retrieve the
descriptor label.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Use the new gpiochip_dup_line_label() helper to safely retrieve the
descriptor label.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Use the new gpiochip_dup_line_label() helper to safely retrieve the
descriptor label.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
gpiochip_is_requested() not only has a misleading name but it returns
a pointer to a string that is freed when the descriptor is released.
Provide a new helper meant to replace it, which returns a copy of the
label string instead.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Use a common C comment (/*) instead of kernel-doc notation to prevent
warnings from scripts/kernel-doc.
gpio-max730x.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
gpio-max730x.c:3: warning: missing initial short description on line:
* Copyright (C) 2006 Juergen Beisert, Pengutronix
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This makes it possible to provide basic clock output on pins
14 and 15. The clocks are typically used by random electronics,
not modeled in the device tree, so they just need to be provided
on request.
In order to not disturb old systems that require that the
hardware defaults are kept in the clock setting bits, we only
manipulate these if either device tree property is present.
Once we know a device needs one of the clocks we can set it
in the device tree.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
If gpio_set_transitory() fails, we should free the GPIO again. Most
notably, the flag FLAG_REQUESTED has previously been set in
gpiod_request_commit(), and should be reset on failure.
To my knowledge, this does not affect any current users, since the
gpio_set_transitory() mainly returns 0 and -ENOTSUPP, which is converted
to 0. However the gpio_set_transitory() function calles the .set_config()
function of the corresponding GPIO chip and there are some GPIO drivers in
which some (unlikely) branches return other values like -EPROBE_DEFER,
and -EINVAL. In these cases, the above mentioned FLAG_REQUESTED would not
be reset, which results in the pin being blocked until the next reboot.
Fixes: e10f72bf4b ("gpio: gpiolib: Generalise state persistence beyond sleep")
Signed-off-by: Boerge Struempfel <boerge.struempfel@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The forward declaration for struct gpio_device should be provided for
both branches of the #ifdef.
Fixes: 08a149c40b ("gpiolib: Clean up headers")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Provide a getter for the GPIO device label string so that users don't
have to dereference struct gpio_chip directly.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The preferred pattern for autopointers is to initialize them when they're
declared unless it doesn't make sense. Move the declaration of the
managed device pointer to where it's initialized.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use lock guards from cleanup.h to simplify locking.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Unexport suspend/resume handles for the lack of external users and while
at it, make them static, so that they can be discarded by the compiler
if not used (CONFIG_PM_SLEEP=n).
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20231113131600.10828-4-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reuse tng_gpio_pm_ops from Intel Tangier driver instead of calling
them through a local copy.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20231113131600.10828-3-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use EXPORT_NS_GPL_SIMPLE_DEV_PM_OPS() helper to export pm_ops to
GPIO_TANGIER namespace, so that they can be reused.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20231113131600.10828-2-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This contains a few fixes and a bunch of cleanups, a lot of which is in
preparation for Uwe's character device support that may be ready in time
for the next merge window.
-----BEGIN PGP SIGNATURE-----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=S2DI
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This contains a few fixes and a bunch of cleanups, a lot of which is
in preparation for Uwe's character device support that may be ready in
time for the next merge window"
* tag 'pwm/for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (37 commits)
pwm: samsung: Document new member .channel in struct samsung_pwm_chip
pwm: bcm2835: Add support for suspend/resume
pwm: brcmstb: Checked clk_prepare_enable() return value
pwm: brcmstb: Utilize appropriate clock APIs in suspend/resume
pwm: pxa: Explicitly include correct DT includes
pwm: cros-ec: Simplify using devm_pwmchip_add() and dev_err_probe()
pwm: samsung: Consistently use the same name for driver data
pwm: vt8500: Simplify using devm functions
pwm: sprd: Simplify using devm_pwmchip_add() and dev_err_probe()
pwm: sprd: Provide a helper to cast a chip to driver data
pwm: spear: Simplify using devm functions
pwm: mtk-disp: Simplify using devm_pwmchip_add()
pwm: imx-tpm: Simplify using devm functions
pwm: brcmstb: Simplify using devm functions
pwm: bcm2835: Simplify using devm functions
pwm: bcm-iproc: Simplify using devm functions
pwm: Adapt sysfs API documentation to reality
pwm: dwc: add PWM bit unset in get_state call
pwm: dwc: make timer clock configurable
pwm: dwc: split pci out of core driver
...
pinctrl_gpio_request() now has the same signature as the wrapper around
it so we can drop them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
pinctrl_gpio_request() now has the same signature as the wrapper around
it so we can drop them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_set_config() is no longer used, let's drop the
'_new' suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_direction_output() is no longer used, let's drop
the '_new' suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_direction_input() is no longer used, let's drop the
'_new' suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_free()() is no longer used, let's drop the '_new'
suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_request() is no longer used, let's drop the '_new'
suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that pinctrl_gpio_can_use_line() is no longer used, let's drop the
'_new' suffix from its improved variant.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Use the improved variant of pinctrl_gpio_can_use_line() which takes a
pointer to the gpio_chip and a controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Replace the pinctrl helpers taking the global GPIO number as argument
with the improved variants that instead take a pointer to the GPIO chip
and the controller-relative offset.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
With all users of gpiochip_find() converted to using gpio_device_find(),
we can now remove this function from the kernel.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
Nothing really major in here, just lots of constant development for new
hardware. Included in here are:
- Thunderbolt (i.e. USB4) fixes for reported issues and support for
new hardware types and devices
- USB typec additions of new drivers and cleanups for some existing
ones
- xhci cleanups and expanded tracing support and some platform
specific updates
- USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio, spi,
and i2c drivers for that type of device (all acked by the respective
subsystem maintainers.)
- lots of USB gadget driver updates and cleanups
- new USB dwc3 platforms supported, as well as other dwc3 fixes and
cleanups
- USB chipidea driver updates
- other smaller driver cleanups and additions, full details in the
shortlog
All of these have been in the linux-next tree for a while with no
reported problems, EXCEPT for some merge conflicts that you will run
into in your tree. 2 of them are in device-tree files, which will be
trivial to resolve (accept both sides), and the last in the
drivers/gpio/gpio-ljca.c file, in the remove callback, resolution should
be pretty trivial (take the version in this branch), see here:
https://lore.kernel.org/all/20231016134159.11d8f849@canb.auug.org.au/
for details, or I can provide a resolved merge point if needed.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUStew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykxgQCggUyfGo+JVV8XZVu5A9KwT6nr7mUAmwUgFxhZ
khK77t0KqF4hjXryeaHa
=iPd+
-----END PGP SIGNATURE-----
Merge tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
Nothing really major in here, just lots of constant development for
new hardware. Included in here are:
- Thunderbolt (i.e. USB4) fixes for reported issues and support for
new hardware types and devices
- USB typec additions of new drivers and cleanups for some existing
ones
- xhci cleanups and expanded tracing support and some platform
specific updates
- USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
spi, and i2c drivers for that type of device (all acked by the
respective subsystem maintainers.)
- lots of USB gadget driver updates and cleanups
- new USB dwc3 platforms supported, as well as other dwc3 fixes and
cleanups
- USB chipidea driver updates
- other smaller driver cleanups and additions, full details in the
shortlog
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
usb: gadget: uvc: Add missing initialization of ssp config descriptor
usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
usb: raw-gadget: report suspend, resume, reset, and disconnect events
usb: raw-gadget: don't disable device if usb_ep_queue fails
usb: raw-gadget: properly handle interrupted requests
usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
usb: gadget: aspeed_udc: Convert to platform remove callback returning void
dt-bindings: usb: fsa4480: Add compatible for OCP96011
usb: typec: fsa4480: Add support to swap SBU orientation
dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
thunderbolt: Fix one kernel-doc comment
usb: gadget: f_ncm: Always set current gadget in ncm_bind()
usb: core: Remove duplicated check in usb_hub_create_port_device
usb: typec: tcpm: Add additional checks for contaminant
arm64: dts: rockchip: rk3588s: Add USB3 host controller
usb: dwc3: add optional PHY interface clocks
dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
...
Most of changes at this time are for ASoC, spread over ASoC core and
drivers due to the API prefix standardization. Other than that, there
have little change wrt API, rather lots of driver-specific updates and
fixes. Some highlight below:
ASoC:
- Standardization of API prefix
- GPIO API usage improvements
- Support for HDA patches
- Lots of work on SOF, including crash dump support
- Fixes for noise when stopping some Sounwire CODECs
- Support for AMD platforms with es83xx, AMD ACP 6.3 and 7.0, Awinc
AT87390 and AW88399, many Intel platforms, many Mediatek platforms,
Qualcomm SM6115 and SC7180 platforms, Richtek RTQ9128 and Texas
Instruments TAS575x
HD-audio and USB-audio:
- Deferred probe support of audio component binding
- More fixes and enhancements for Cirrus subcodecs
- USB Scarlett2 mixer and McIntosh DSD quirk
Others:
- More enhancement of snd-aloop driver
- Update MAINTAINERS entry for linux-sound mailing list
-----BEGIN PGP SIGNATURE-----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=2/dI
-----END PGP SIGNATURE-----
Merge tag 'sound-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Most of changes at this time are for ASoC, spread over ASoC core and
drivers due to the API prefix standardization.
Other than that, there have little change wrt API, rather lots of
driver-specific updates and fixes.
Some highlight below:
ASoC:
- Standardization of API prefix
- GPIO API usage improvements
- Support for HDA patches
- Lots of work on SOF, including crash dump support
- Fixes for noise when stopping some Sounwire CODECs
- Support for AMD platforms with es83xx, AMD ACP 6.3 and 7.0, Awinc
AT87390 and AW88399, many Intel platforms, many Mediatek platforms,
Qualcomm SM6115 and SC7180 platforms, Richtek RTQ9128 and Texas
Instruments TAS575x
HD-audio and USB-audio:
- Deferred probe support of audio component binding
- More fixes and enhancements for Cirrus subcodecs
- USB Scarlett2 mixer and McIntosh DSD quirk
Others:
- More enhancement of snd-aloop driver
- Update MAINTAINERS entry for linux-sound mailing list"
* tag 'sound-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (485 commits)
ALSA: hda: cs35l41: Fix missing error code in cs35l41_smart_amp()
ALSA: hda: cs35l41: mark cs35l41_verify_id() static
ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag
ASoC: soc-dai: add flag to mute and unmute stream during trigger
ASoC: ams-delta.c: use component after check
ASoC: amd: acp: select SND_SOC_AMD_ACP_LEGACY_COMMON for ACP63
ASoC: codecs: aw88399: fix typo in Kconfig select
ASoC: amd: acp: add ACPI dependency
ASoC: Intel: avs: Add rt5514 machine board
ASoC: Intel: avs: Add rt5514 machine board
ALSA: scarlett2: Add missing check with firmware version control
ALSA: virtio: use ack callback
ALSA: scarlett2: Remap Level Meter values
ALSA: scarlett2: Allow passing any output to line_out_remap()
ALSA: scarlett2: Add support for reading firmware version
ALSA: scarlett2: Rename Gen 3 config sets
ALSA: scarlett2: Rename scarlett_gen2 to scarlett2
ASoC: cs35l41: Detect CSPL errors when sending CSPL commands
ALSA: hda: cs35l41: Check CSPL state after loading firmware
ALSA: hda: cs35l41: Do not unload firmware before reset in system suspend
...
GPIOLIB core:
- provide interfaces allowing users to retrieve, manage and query the
reference counted GPIO device instead of accessing the private gpio_chip
structure
- replace gpiochip_find() with gpio_device_find()
- remove unused acpi_get_and_request_gpiod()
- improve the ignore_interrupt functionality in GPIO ACPI
- correct notifier return codes in gpiolib-of
- unexport gpiod_set_transitory() as it's unused outside of core GPIO code
- while there are still external users accessing struct gpio_chip, let's
make gpiochip_get_desc() public so that they at least use the preferred
helper
- improve locking for lookup tables
- annotate struct linereq with __counted_by
- improve GPIOLIB docs
- add an OF quirk for LED trigger sources
Driver improvements:
- convert all GPIO drivers with .remove() callbacks to using the new
variant returning void instead of int
- stop accessing the GPIOLIB private structures in gpio-mockup,
i2c-mux-gpio, hte-tegra194, gpio-sim
- use the recommended pattern for autofree variables in gpio-sim
- add support for more models to gpio-loongson
- use a notifier chain to notify other blocks about interrupts in
gpio-eic-sprd instead of looking up GPIO devices on every interrupt
- convert gpio-pca953x and gpio-fx6408 to using the maple tree regmap
cache
- don't include GPIOLIB internal headers in drivers which don't need them
- move the ingenic NAND quirk into gpiolib-of
- add an ignore interrupt quirk for Peaq C1010
- drop static GPIO base from gpio-omap, gpio-f7188x
- use the preferred device_get_match_data() function in drivers that still
don't
- refactor gpio-pca953x: switch to using DEFINE_SIMPLE_DEV_PM_OPS(), use
cleanup helpers, use dev_err_probe() where it makes sense, fully convert
to using devres and some other minor tweaks
DT bindings:
- add support for a new model to gpio-vf610 and update existing properties
- add support for more loongson models
- add missing support for imx models that are used but undocumented
- convert bindings for Intel IXP4xx to schema
Minor stuff:
- deprecate gpio-mockup in favor of gpio-sim
- include missing headers here and there
- stop using gpiochip_find() in OMAP1 board files
- minor tweaks in gpio-vf610, gpio-hisi
- remove unneeded 'extern' specifiers from headers
-----BEGIN PGP SIGNATURE-----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=1QF8
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We don't have any new drivers. The loongson driver is getting extended
with support for new models. There's a big refactor of gpio-pca953x
and many small improvements to others.
The GPIO code in the kernel has acquired a lot of cruft over the years
as well as many abusers of the API across the kernel tree. This
release cycle we have started a major cleanup and improvement effort
that will most likely span several releases. We have started by
converting external users of struct gpio_chip to accessing the wrapper
around it - struct gpio_device. This is because the latter is
reference counted while the former is removed when the provider is
unbound. We also removed several instances of drivers accessing
private GPIOLIB structures and including the private header from
drivers/gpio/.
To that end you'll see several commits aimed at different subsystems
(acked by relevant maintainers) as well as two merges from the
x86/platform tree.
We'll then rework the locking in GPIOLIB which currently uses a big
spinlock for many different things and could use becoming more
fine-grained, especially as it doesn't even get the locking right.
We'll also use SRCU for protecting the gpio_chip pointer against
in-kernel hot-unplug crashes similar to what we saw triggered from
user-space and fixed with semaphores in gpiolib-cdev. The core GPIOLIB
is still vulnerable to these use-cases. I'm just mentioning the plans
here, this is not part of this PR.
You'll see some new instances of using __free(). We've added a
gpio_device_put cleanup helper similar to the put_device one
introduced by Peter Zijlstra and used it according to the preferred
pattern except where it didn't make sense.
GPIOLIB core:
- provide interfaces allowing users to retrieve, manage and query the
reference counted GPIO device instead of accessing the private
gpio_chip structure
- replace gpiochip_find() with gpio_device_find()
- remove unused acpi_get_and_request_gpiod()
- improve the ignore_interrupt functionality in GPIO ACPI
- correct notifier return codes in gpiolib-of
- unexport gpiod_set_transitory() as it's unused outside of core GPIO
code
- while there are still external users accessing struct gpio_chip,
let's make gpiochip_get_desc() public so that they at least use the
preferred helper
- improve locking for lookup tables
- annotate struct linereq with __counted_by
- improve GPIOLIB docs
- add an OF quirk for LED trigger sources
Driver improvements:
- convert all GPIO drivers with .remove() callbacks to using the new
variant returning void instead of int
- stop accessing the GPIOLIB private structures in gpio-mockup,
i2c-mux-gpio, hte-tegra194, gpio-sim
- use the recommended pattern for autofree variables in gpio-sim
- add support for more models to gpio-loongson
- use a notifier chain to notify other blocks about interrupts in
gpio-eic-sprd instead of looking up GPIO devices on every interrupt
- convert gpio-pca953x and gpio-fx6408 to using the maple tree regmap
cache
- don't include GPIOLIB internal headers in drivers which don't need
them
- move the ingenic NAND quirk into gpiolib-of
- add an ignore interrupt quirk for Peaq C1010
- drop static GPIO base from gpio-omap, gpio-f7188x
- use the preferred device_get_match_data() function in drivers that
still don't
- refactor gpio-pca953x: switch to using DEFINE_SIMPLE_DEV_PM_OPS(),
use cleanup helpers, use dev_err_probe() where it makes sense,
fully convert to using devres and some other minor tweaks
DT bindings:
- add support for a new model to gpio-vf610 and update existing
properties
- add support for more loongson models
- add missing support for imx models that are used but undocumented
- convert bindings for Intel IXP4xx to schema
Minor stuff:
- deprecate gpio-mockup in favor of gpio-sim
- include missing headers here and there
- stop using gpiochip_find() in OMAP1 board files
- minor tweaks in gpio-vf610, gpio-hisi
- remove unneeded 'extern' specifiers from headers"
* tag 'gpio-updates-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (108 commits)
hte: tegra194: add GPIOLIB dependency
hte: tegra194: don't access struct gpio_chip
gpiolib: provide gpio_device_get_base()
i2c: mux: gpio: don't fiddle with GPIOLIB internals
gpiolib: provide gpiod_to_gpio_device()
gpiolib: provide gpio_device_to_device()
gpio: hisi: Fix format specifier
gpiolib: provide gpio_device_find_by_fwnode()
gpio: acpi: remove acpi_get_and_request_gpiod()
gpio: Use device_get_match_data()
gpio: vf610: update comment for i.MX8ULP and i.MX93 legacy compatibles
platform/x86: int3472: Switch to devm_get_gpiod()
platform/x86: int3472: Stop using gpiod_toggle_active_low()
platform/x86: int3472: Add new skl_int3472_gpiod_get_from_temp_lookup() helper
platform/x86: int3472: Add new skl_int3472_fill_gpiod_lookup() helper
gpio: vf610: simplify code by dropping data check
gpio: vf610: add i.MX8ULP of_device_id entry
dt-bindings: gpio: vf610: add i.MX95 compatible
dt-bindings: gpio: vf610: correct i.MX8ULP and i.MX93
dt-bindings: gpio: vf610: update gpio-ranges
...
We found a glitch when configuring the pad as output high. To avoid this
glitch, move the data value setting before direction config in the
function vf610_gpio_direction_output().
Fixes: 659d8a6231 ("gpio: vf610: add imx7ulp support")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
[Bartosz: tweak the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add flag IRQCHIP_MASK_ON_SUSPEND to make sure gpio irq is masked on
suspend, if lack this flag, current irq arctitecture will not mask
the irq, and these unmasked gpio irq will wrongly wakeup the system
even they are not config as wakeup source.
Also add flag IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND to make sure the gpio
irq which is configed as wakeup source can work as expect.
Fixes: 7f2691a196 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Instead of requiring each driver to care for assigning the owner member
of struct pwm_ops, handle that implicitly using a macro. Note that the
owner member has to be moved to struct pwm_chip, as the ops structure
usually lives in read-only memory and so cannot be modified.
The upside is that new low level drivers cannot forget the assignment and
save one line each. The pwm-crc driver didn't assign .owner, that's not
a problem in practice though as the driver cannot be compiled as a
module.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # Intel LPSS
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> # pwm-{bcm,brcm}*.c
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> # sun4i
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> # pwm-visconti
Acked-by: Heiko Stuebner <heiko@sntech.de> # pwm-rockchip
Acked-by: Michael Walle <michael@walle.cc> # pwm-sl28cpld
Acked-by: Neil Armstrong <neil.armstrong@linaro.org> # pwm-meson
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230804142707.412137-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Let's start adding getters for the opaque struct gpio_device. Start with
a function allowing to retrieve the base GPIO number.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Accessing struct gpio_chip backing a GPIO device is only allowed for the
actual providers of that chip.
Similarly to how we introduced gpio_device_find() in order to replace
the abused gpiochip_find(), let's introduce a counterpart to
gpiod_to_chip() that returns a reference to the GPIO device owning the
descriptor. This is done in order to later remove gpiod_to_chip()
entirely.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Peter Rosin <peda@axentia.se>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
There are users in the kernel who need to retrieve the address of the
struct device backing the GPIO device. Currently they needlessly poke in
the internals of GPIOLIB. Add a dedicated getter function.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
The hisi_gpio->line is unsigned int so the format specifier
should have been %u not %d.
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
One of the ways of looking up GPIO devices is using their fwnode.
Provide a helper for that to avoid every user implementing their
own matching function.
Reviewed-by: Dipen Patel <dipenp@nvidia.com>
Tested-by: Dipen Patel <dipenp@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231010151709.4104747-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This driver communicate with LJCA GPIO module with specific
protocol through interfaces exported by LJCA USB driver.
Update the driver according to LJCA USB driver's changes.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/1696833205-16716-5-git-send-email-wentong.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These gpio names are due to old DT bindings not following the
"-gpio"/"-gpios" conventions. Handle it using a quirk so the
driver can just look up the GPIOs.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231006-descriptors-asoc-mediatek-v1-1-07fe79f337f5@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
With no more users, we can remove acpi_get_and_request_gpiod().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
i.MX8ULP and i.MX93 legacy compatible strings use dual regs, while
new compatible strings use one reg. The "support old compatible strings"
is not clear to reflect the fact, so update it.
Suggested-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
All of_device_id entries has valid data, so code simplified
a bit by dropping the data check.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
i.MX8ULP/93 GPIO supports similar feature as i.MX7ULP GPIO, but i.MX8ULP is
actually not hardware compatible with i.MX7ULP. i.MX8ULP only has one
register base, not two bases. i.MX8ULP and i.MX93 actually has two
interrupts for each gpio controller, one for Trustzone non-secure world,
one for secure world.
Although the Linux Kernel driver gpio-vf610.c could work with
fsl,imx7ulp-gpio compatible, it is based on some tricks did in device tree
with some offset added to base address.
Add a new of_device_id entry for i.MX8ULP. But to make the driver could
also support old bindings, check the compatible string first, before
check the device data.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
pinctrl_gpio_set_config() expects the GPIO number from the global GPIO
numberspace, not the controller-relative offset, which needs to be added
to the chip base.
Fixes: 5ae4cb94b3 ("gpio: aspeed: Add debounce support")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
We have removed all callers of gpiochip_find() so don't mention it in
gpiolib-sysfs.c.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
We're porting all users of gpiochip_find() to using gpio_device_find().
Update the swnode GPIO code.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
We're porting all users of gpiochip_find() to using gpio_device_find().
Update the ACPI GPIO code.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
We're porting all users of gpiochip_find() to using gpio_device_find().
Update the OF GPIO code.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Remove all remaining uses of find_chip_by_name() (and subsequently:
gpiochip_find()) from gpiolib.c and use the new
gpio_device_find_by_label() instead.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
The process of converting all unauthorized users of struct gpio_chip to
using dedicated struct gpio_device function will be long so in the
meantime we must provide a way of retrieving the pointer to struct
gpio_chip from a GPIO device.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Getting the GPIO descriptor directly from the gpio_chip struct is
dangerous as we don't take the reference to the underlying GPIO device.
In order to start working towards removing gpiochip_get_desc(), let's
provide a safer variant that works with an existing reference to struct
gpio_device.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
By far the most common way of looking up GPIO devices is using their
label. Provide a helpers for that to avoid every user implementing their
own matching function.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
gpiochip_find() is wrong and its kernel doc is misleading as the
function doesn't return a reference to the gpio_chip but just a raw
pointer. The chip itself is not guaranteed to stay alive, in fact it can
be deleted at any point. Also: other than GPIO drivers themselves,
nobody else has any business accessing gpio_chip structs.
Provide a new gpio_device_find() function that returns a real reference
to the opaque gpio_device structure that is guaranteed to stay alive for
as long as there are active users of it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
In order to start migrating away from accessing struct gpio_chip by
users other than their owners, let's first make the reference management
functions for the opaque struct gpio_device public in the driver.h
header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The OMAP GPIO driver hardcodes the MPIO chip base, but there
is no point: we have already moved all consumers over to using
descriptor look-ups.
Drop the MPUIO GPIO base and use dynamic assignment.
Root out the unused instances of the OMAP_MPUIO() macro and
delete the unused OMAP_GPIO_IS_MPUIO() macro.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There are two places in the code where we retrieve a lookup table using
gpiod_find_lookup_table() (which protects the table list with the lookup
table lock) and then use it after the lock is released.
We need to keep the lookup table mutex locked the entire time we're using
the tables. Remove the locking from gpiod_find_lookup_table() and use
guards to protect the code actually using the table objects.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
We use size_t, ssize_t, bool and some other types defined in
linux/types.h so include it in the driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The "trigger-sources" phandle used for LED triggers are special:
the DT bindings mandate that such triggers have the same phandle
references no matter what the trigger is. A GPIO is just another
kind of device that can trigger a LED.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Similarly to PXA3xx and MMP2, pinctrl-single isn't capable of setting
pin direction on MMP either.
Fixes: a770d94637 ("gpio: pxa: add pin control gpio direction and request")
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We have a special place for OF polarity quirks in gpiolib-of.c. Let's
move this over there so that it doesn't pollute the driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
The drivers uses a mutex and I2C bus access in its PMIC EIC chip
get implementation. This means these functions can sleep and the PMIC EIC
chip should set the can_sleep property to true.
This will ensure that a warning is printed when trying to get the
value from a context that potentially can't sleep.
Fixes: 348f3cde84 ("gpio: Add Spreadtrum PMIC EIC driver support")
Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This patch was to add loongson 2k0500, 2k2000 and 3a5000 gpio chip
driver support and define inten_offset attibute to enable gpio chip
interrupt.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As timbgpio_irq_enable()/timbgpio_irq_disable() callback could be
executed under irq context, it could introduce double locks on
&tgpio->lock if it preempts other execution units requiring
the same locks.
timbgpio_gpio_set()
--> timbgpio_update_bit()
--> spin_lock(&tgpio->lock)
<interrupt>
--> timbgpio_irq_disable()
--> spin_lock_irqsave(&tgpio->lock)
This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.
To prevent the potential deadlock, the patch uses spin_lock_irqsave()
on &tgpio->lock inside timbgpio_gpio_set() to prevent the possible
deadlock scenario.
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct linereq.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Variables managed with __free() should typically be initialized where
they are declared so that the __free() callback is paired with its
counterpart resource allocator. Fix the second instance of using
__free() in gpio-sim to follow this pattern.
Fixes: 3faf89f27a ("gpio: sim: simplify code with cleanup helpers")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
gpio_sim_make_line_names() returns NULL or ERR_PTR() so we must not use
__free(kfree) on the returned address. Split this function into two, one
that determines the size of the "gpio-line-names" array to allocate and
one that actually sets the names at correct offsets. The allocation and
assignment of the managed pointer happens in between.
Fixes: 3faf89f27a ("gpio: sim: simplify code with cleanup helpers")
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Closes: https://lore.kernel.org/all/07c32bf1-6c1a-49d9-b97d-f0ae4a2b42ab@p183/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
If an error occurs after a successful irq_domain_add_linear() call, it
should be undone by a corresponding irq_domain_remove(), as already done
in the remove function.
Fixes: c6ce2b6bff ("gpio: add TB10x GPIO driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We're using various ERR macros from linux/err.h but the include is
missing. Add it.
Fixes: cb8c474e79 ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Instead of dereferencing pdev everywhere, just store the address of the
underlying struct device in a local variable.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
This is a tristate module, it can be unloaded. We need to cleanup properly
and unregister from the interrupt notifier on driver detach.
Fixes: b32415652a ("gpio: eic-sprd: use atomic notifiers to notify all chips about irqs")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
It makes sense for a GPIO driver to want to get its own descriptor
without requesting it. After all, the driver knows that it'll still be
valid. Let's move this helper to linux/gpio/driver.h.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
We access internals of struct gpio_device and struct gpio_desc because
it's easier but it can actually be avoided and we're working towards a
better encapsulation of GPIO data structures across the kernel so let's
start at home.
Instead of checking gpio_desc flags, let's just track the requests of
GPIOs in the driver. We also already store the information about
direction of simulated lines.
For kobjects needed by sysfs callbacks: we can iterate over the children
devices of the top-level platform device and compare their fwnodes
against the one passed to the init function from probe.
While at it: fix one line break and remove the untrue part about
configfs callbacks using dev_get_drvdata() from a comment.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
ib-x86-android-tablets-v6.7: v6.6-rc1 + ib-pdx86-android-tablets
for merging into the GPIO subsystem for v6.7.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmT++0EUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wpeQgAuseg8r6ZtneCmmRuD2s6fcPaAgPX
YoX14tWV8iHDRmNktg504kO+V6qW7XDRYAoQ2zx0yMSdi7jPZSNtHJxLLnhPL9FZ
0sx6KwCFUyhXtF5HEr3jC21kg+94wPRe8XQCQ2zLZ+7mta+272gZZREyBi4CBfYv
N3mSgiBYEfWgdY0Ye4HcMrg3yDKcCspcc6Wy3tErFjrw5emdMvPIl4INurECQ3lq
f2b5iVmpWK00xG+rFUFEUt+pp5fjCawOsnvvbnrC2xG++m8/N6UmVdAO2/JnXCrL
ZrxNM7WUKR0prCCj+s0uy9Otzz5X6DbkpZ8RY7e5s8ywN/O+yUNWlc7n5A==
=mgID
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-ib-x86-android-tablets-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 into gpio/for-next
Immutable branch between pdx86 android tablets branch and GPIO due for the v6.7 merge window
ib-x86-android-tablets-v6.7: v6.6-rc1 + ib-pdx86-android-tablets
for merging into the GPIO subsystem for v6.7.
On the Peaq C1010 2-in-1 INT33FC:00 pin 3 is connected to
a "dolby" button. At the ACPI level an _AEI event-handler
is connected which sets an ACPI variable to 1 on both
edges. This variable can be polled + cleared to 0 using WMI.
Since the variable is set on both edges the WMI interface is pretty
useless even when polling. So instead of writing a custom WMI
driver for this the x86-android-tablets code instantiates
a gpio-keys platform device for the "dolby" button.
Add an ignore_interrupt quirk for INT33FC:00 pin 3 on the Peaq C1010,
so that it is not seen as busy when the gpio-keys driver requests it.
Note this replaces a hack in x86-android-tablets where it would
call acpi_gpiochip_free_interrupts() on the INT33FC:00 GPIO
controller. acpi_gpiochip_free_interrupts() is considered private
(internal) gpiolib API so x86-android-tablets should stop using it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-3-hdegoede@redhat.com
In some cases where a broken AEI is present for a GPIO and the GPIO
is listed in the ignore_interrupt list to avoid the broken event
handler, the kernel may want to use the GPIO for another purpose.
Before this change trying to use such a GPIO for another purpose would
fail, because the ignore_interrupt list was only checked after
the acpi_request_own_gpiod() call, causing the GPIO to already be
claimed even though it is listed in the ignore_interrupt list.
Fix this by moving the ignore_interrupt list to above
the acpi_request_own_gpiod() call.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230909141816.58358-2-hdegoede@redhat.com
Calling gpiochip_find() from interrupt handler in this driver is an
abuse of the GPIO API. It only happens to work because nobody added a
might_sleep() to it and the lock used by GPIOLIB is a spinlock.
Both will soon be changed as we're limiting both the number of
interfaces allowed to be called from atomic context as well as making
struct gpio_chip private to the GPIO code that owns it. We'll also
switch to protecting the global GPIO device list with a mutex as there
is no reason to allow changes to it from interrupt handlers.
Instead of iterating over all SPRD chips and looking up each
corresponding GPIO chip, let's make each SPRD GPIO controller register
with a notifier chain. The chain will be called at interrupt so that
every chip that already probed will be notified. The rest of the
interrupt handling remains the same. This should result in faster code as
we're avoiding iterating over the list of all GPIO devices.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Chunyan Zhang <zhang.lyra@gmail.com>
Tested-by: Wenhua Lin <wenhua.lin@unisoc.com>
The gpiolib.h is unnecessarily included in the driver. None of its
symbols are used so drop it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The gpiolib.h is unnecessarily included in the driver. None of its
symbols are used so drop it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The gpiolib.h is unnecessarily included in the driver. None of its
symbols are used so drop it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
According to the comments in linux/notifier.h, the code to return when a
notifications is "not for us" is NOTIFY_DONE, not NOTIFY_OK.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
There are no and never have been any users of gpiod_set_transitory()
outside the core GPIOLIB code. Make it private.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Don't include gpiolib.h. Track the request status of lines locally
instead. In order to retrieve the device name use the fact that
gpio-mockup supports only a single GPIO device per platform device and
call device_find_any_child().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Use lock from linux/cleanup.h and simplify locking paths.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
We have a much better alternative to the clunky old gpio-mockup. Don't
remove it just yet (there are tests depending on it out there) but make
Kconfig say that it should no longer be used in new projects.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
The desc assigned to debugfs private structure is unused so remove it.
Fixes: 9202ba2397 ("gpio: mockup: implement event injecting over debugfs")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
The pull field of the line state struct is undocumented. Fix it.
Fixes: 2a9e27408e ("gpio: mockup: rework debugfs interface")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
switch pin base from static to automatic allocation to
avoid conflicts and align with other gpio chip drivers
Signed-off-by: xingtong.wu <xingtong.wu@siemens.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Some of the headers are not use, some are missing. Fix that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In a few functions goto label is useless as there are no locking,
no nothing that may justify its usage. Get rid of it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
SIMPLE_DEV_PM_OPS() is deprecated, replace it with pm_sleep_ptr()
and DEFINE_SIMPLE_DEV_PM_OPS() for setting the driver's PM routines.
We can now remove the ifdeffery surrounding the suspend and resume
functions.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We have a temporary variable to keep pointer to struct gpio_chip.
Utilise it where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We have a temporary variable to keep pointer to struct device.
Utilise it where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use macros defined in linux/cleanup.h to automate resource lifetime
control in gpio-pca953x.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Split regcache handling to the respective helpers. It will allow to
have further refactoring with ease.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
At least in pca953x_irq_setup() we may use dev_err_probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Curtrently the error path is unsynchronised with removal due to
regulator being disabled before other device managed resources
are handled. Correct that by wrapping regulator enablement in
the respective call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
New code should solely use firmware nodes for the specifics and
not any callbacks.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Commit f569143935 ("gpio: zynq: fix zynqmp_gpio not an immutable chip
warning") ditched the open-coded resource allocation handlers in favor
of the generic ones. These generic handlers don't maintain the PM
runtime anymore, which causes a regression in that level IRQs are no
longer reported.
Restore the original handlers to fix this.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Fixes: f569143935 ("gpio: zynq: fix zynqmp_gpio not an immutable chip warning")
Cc: stable@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Core GPIOLIB updates:
- wake-up poll() in user-space on device unbind
- improve fwnode usage
- interrupt domain handling improvements
- correctly handle the ngpios property in gpio-mmio
Driver cleanups:
- remove unneeded calls to platform_set_drvdata() all around the place
- remove unneeded of_match_ptr() expansions whenever a driver depends on
CONFIG_OF
- remove redundant calls to dev_err_probe() from gpio-omap and gpio-davinci
Driver improvements:
- use autopointers and guards from cleanup.h in gpio-sim
- shrink code in gpio-sim using some common helpers
- convert the idio family of drivers to using gpio-regmap
- convert gpio-ws16c48 to using gpio-regmap
- use devres to simplify code in gpio-pisosr and gpio-mxc
- update gpio-sifive: support IRQ wake, improve interrupt handling, allow
building as module
- make gpio-ge and gpio-bcm-kona OF-independent (plus some minor tweaks)
- add support for new models in gpio-pca953x and gpio-ds4520
- add runtime PM support to gpio-mxc
- fix a build warning in gpio-mxs
- add support for adding pin ranges to gpio-mlxbf3
- add counter/timer support to gpio-104-dio-48e
- switch to dynamic GPIO base allocation in gpio-vf610
- minor oneliners here and there
Device-tree bindings updates:
- enable the gpio-line-names property in snps,dw-apb and STMPE GPIO
- document new models in fsl-imx-gpio, ds4520 and pca95xx
- convert the bindings for brcm,kona-gpio to YAML
-----BEGIN PGP SIGNATURE-----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=t+zD
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have a lot of code refactoring using common helpers and ended up
removing more lines then we're adding this release cycle.
Nothing really stands out, just small updates all over the place.
Core GPIOLIB updates:
- wake-up poll() in user-space on device unbind
- improve fwnode usage
- interrupt domain handling improvements
- correctly handle the ngpios property in gpio-mmio
Driver cleanups:
- remove unneeded calls to platform_set_drvdata() all around the
place
- remove unneeded of_match_ptr() expansions whenever a driver depends
on CONFIG_OF
- remove redundant calls to dev_err_probe() from gpio-omap and
gpio-davinci
Driver improvements:
- use autopointers and guards from cleanup.h in gpio-sim
- shrink code in gpio-sim using some common helpers
- convert the idio family of drivers to using gpio-regmap
- convert gpio-ws16c48 to using gpio-regmap
- use devres to simplify code in gpio-pisosr and gpio-mxc
- update gpio-sifive: support IRQ wake, improve interrupt handling,
allow building as module
- make gpio-ge and gpio-bcm-kona OF-independent (plus some minor
tweaks)
- add support for new models in gpio-pca953x and gpio-ds4520
- add runtime PM support to gpio-mxc
- fix a build warning in gpio-mxs
- add support for adding pin ranges to gpio-mlxbf3
- add counter/timer support to gpio-104-dio-48e
- switch to dynamic GPIO base allocation in gpio-vf610
- minor oneliners here and there
Device-tree bindings updates:
- enable the gpio-line-names property in snps,dw-apb and STMPE GPIO
- document new models in fsl-imx-gpio, ds4520 and pca95xx
- convert the bindings for brcm,kona-gpio to YAML"
* tag 'gpio-updates-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (94 commits)
gpio: pca953x: add support for TCA9538
dt-bindings: gpio: pca95xx: document new tca9538 chip
gpio: pca953x: Use i2c_get_match_data()
gpio: mlxbf3: use capital "OR" for multiple licenses in SPDX
gpio: pcf857x: Extend match data support for OF tables
gpio: vf610: switch to dynamic allocat GPIO base
gpiolib: provide and use gpiod_line_state_notify()
gpio: cdev: wake up lineevent poll() on device unbind
gpio: cdev: wake up linereq poll() on device unbind
gpio: cdev: wake up chardev poll() on device unbind
gpiolib: add a second blocking notifier to struct gpio_device
gpio: cdev: open-code to_gpio_chardev_data()
gpiolib: rename the gpio_device notifier
gpio: mlxbf3: Support add_pin_ranges()
gpio: mxc: Use helper function devm_clk_get_optional_enabled()
gpio: pca9570: fix kerneldoc
gpio: sim: simplify code with cleanup helpers
gpio: sim: replace memmove() + strstrip() with skip_spaces() + strim()
gpio: sim: simplify gpio_sim_device_config_live_store()
gpio: mxc: release the parent IRQ in runtime suspend
...
- Convert drivers to use the ->remove_new() callback
- Propagate the removable attribute for the card's device
MMC host:
- Convert drivers to use the ->remove_new() callback
- atmel-mci: Convert to gpio descriptors and cleanup the code
- davinci: Make SDIO irq truly optional
- renesas_sdhi: Register irqs before registering controller
- sdhci: Simplify the sdhci_pltfm_* interface a bit
- sdhci-esdhc-imx: Improve support for the 1.8V errata
- sdhci-of-at91: Add support for the microchip sam9x7 variant
- sdhci-of-dwcmshc: Add support for runtime PM
- sdhci-pci-o2micro: Add support for the new Bayhub GG8 variant
- sdhci-sprd: Add support for SD high-speed mode tuning
- uniphier-sd: Register irqs before registering controller
-----BEGIN PGP SIGNATURE-----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=ktYf
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Convert drivers to use the ->remove_new() callback
- Propagate the removable attribute for the card's device
MMC host:
- Convert drivers to use the ->remove_new() callback
- atmel-mci: Convert to gpio descriptors and cleanup the code
- davinci: Make SDIO irq truly optional
- renesas_sdhi: Register irqs before registering controller
- sdhci: Simplify the sdhci_pltfm_* interface a bit
- sdhci-esdhc-imx: Improve support for the 1.8V errata
- sdhci-of-at91: Add support for the microchip sam9x7 variant
- sdhci-of-dwcmshc: Add support for runtime PM
- sdhci-pci-o2micro: Add support for the new Bayhub GG8 variant
- sdhci-sprd: Add support for SD high-speed mode tuning
- uniphier-sd: Register irqs before registering controller"
* tag 'mmc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (108 commits)
mmc: atmel-mci: Move card detect gpio polarity quirk to gpiolib
mmc: atmel-mci: move atmel MCI header file
mmc: atmel-mci: Convert to gpio descriptors
mmc: sdhci-sprd: Add SD HS mode online tuning
mmc: core: Add host specific tuning support for SD HS mode
mmc: sdhci-of-dwcmshc: Add runtime PM operations
mmc: sdhci-of-dwcmshc: Add error handling in dwcmshc_resume
mmc: sdhci-esdhc-imx: improve ESDHC_FLAG_ERR010450
mmc: sdhci-pltfm: Rename sdhci_pltfm_register()
mmc: sdhci-pltfm: Remove sdhci_pltfm_unregister()
mmc: sdhci-st: Use sdhci_pltfm_remove()
mmc: sdhci-pxav2: Use sdhci_pltfm_remove()
mmc: sdhci-of-sparx5: Use sdhci_pltfm_remove()
mmc: sdhci-of-hlwd: Use sdhci_pltfm_remove()
mmc: sdhci-of-esdhc: Use sdhci_pltfm_remove()
mmc: sdhci-of-at91: Use sdhci_pltfm_remove()
mmc: sdhci-of-arasan: Use sdhci_pltfm_remove()
mmc: sdhci-iproc: Use sdhci_pltfm_remove()
mmc: sdhci_f_sdh30: Use sdhci_pltfm_remove()
mmc: sdhci-dove: Use sdhci_pltfm_remove()
...
The polarity of the card detection gpio is handled by the "cd-inverted"
property in the device tree. Move this inversion logic to gpiolib to avoid
reading the gpio raw value.
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230825095157.76073-4-balamanikandan.gunasundar@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The TCA9538 is an 8 bit version of the already supported TCA9539.
This chip also has interrupt support.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Replace device_get_match_data() and id lookup for retrieving match data
by i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR". Correct it
to keep consistent format and avoid copy-paste issues.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Associate the swnode of the GPIO device's (which is the interrupt
controller here) with the irq domain. Otherwise the interrupt-controller
device attribute is a no-op.
Fixes: cb8c474e79 ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
If a GPIO simulator device is unbound with interrupts still requested,
we will hit a use-after-free issue in __irq_domain_deactivate_irq(). The
owner of the irq domain must dispose of all mappings before destroying
the domain object.
Fixes: cb8c474e79 ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The driver has OF match table, but still it uses an ID lookup table for
retrieving match data. Currently, the driver is working on the
assumption that an I2C device registered via OF will always match a
legacy I2C device ID. Extend match data support for OF tables by using
i2c_get_match_data() instead of the ID lookup for both OF/ID matches by
making similar OF/ID tables.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
gpiolib want to get completely rid of static gpiobase allocation,
so switch to dynamic allocat GPIO base, also can avoid warning
message:
[ 1.529974] gpio gpiochip0: Static allocation of GPIO base
is deprecated, use dynamic allocation.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Wrap the calls to blocking_notifier_call_chain() for the line state
notifier with a helper that allows us to use fewer lines of code and
simpler syntax.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add a notifier block to the lineevent_state structure and register it
with the gpio_device's device notifier. Upon reception of an event, wake
up the wait queue so that the user-space be forced out of poll() and
need to go into a new system call which will then fail due to the chip
being gone.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Add a notifier block to the linereq structure and register it with the
gpio_device's device notifier. Upon reception of an event, wake up the
wait queue so that the user-space be forced out of poll() and need to go
into a new system call which will then fail due to the chip being gone.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Add a notifier block to the gpio_chardev_data structure and register it
with the gpio_device's device notifier. Upon reception of an event, wake
up the wait queue so that the user-space be forced out of poll() and need
to go into a new system call which will then fail due to the chip being
gone.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Add a new blocking notifier to struct gpio_device and use it to notify
subscribers about the GPIO device being unregistered from the device
model.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
This function is a wrapper around container_of(). It's used only once and
we will have a second notifier soon, so instead of having two flavors of
this helper, let's just open-code where needed.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Change the generic "notifier" name to "line_state_notifier" in order to
reflect its purpose in preparation for adding a second notifier which
will be used to notify wait queues about device unregistering.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Support add_pin_ranges() so that pinctrl_gpio_request() can be called.
The GPIO value is not modified when the user runs the "gpioset" tool.
This is because when gpiochip_generic_request is invoked by the gpio-mlxbf3
driver, "pin_ranges" is empty so it skips "pinctrl_gpio_request()".
pinctrl_gpio_request() is essential in the code flow because it changes the
mux value so that software has control over modifying the GPIO value.
Adding add_pin_ranges() creates a dependency on the pinctrl-mlxbf3.c driver.
Fixes: cd33f216d2 ("gpio: mlxbf3: Add gpio driver support")
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Since commit 7ef9651e97 ("clk: Provide new devm_clk helpers for
prepared and enabled clocks"), devm_clk_get_optional() and
clk_prepare_enable() can now be replaced by
devm_clk_get_optional_enabled() when the driver enables (and possibly
prepares) the clocks for the whole lifetime of the device. Moreover,
it is no longer necessary to unprepare and disable the clocks explicitly.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
While renaming one of the fields in the driver data struct, the kerneldoc
was not updated which apparently angers the test robot now.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308171538.nKKUOtbg-lkp@intel.com/
Fixes: a3f7c1d6dd ("gpio: pca9570: rename platform_data to chip_data")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use macros defined in linux/cleanup.h to automate resource lifetime
control in gpio-sim.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
After we remove a GPIO chip that still has some requested descriptors,
gpiod_free_commit() will fail and we will never put the references to the
GPIO device and the owning module in gpiod_free().
Rework this function to:
- not warn on desc == NULL as this is a use-case on which most free
functions silently return
- put the references to desc->gdev and desc->gdev->owner unconditionally
so that the release callback actually gets called when the remaining
references are dropped by external GPIO users
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
It seems that sysfs interface implicitly relied on the gpiod_free() to
unexport the line. This is logically incorrect as core gpiolib should
not deal with sysfs so instead of restoring it, let's call
gpiod_unexport() from sysfs code.
Fixes: b0ce9ce408 ("gpiolib: Do not unexport GPIO on freeing")
Reported-by: Marek Behún <kabel@kernel.org>
Closes: https://lore.kernel.org/r/20230808102828.4a9eac09@dellmb
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Behún <kabel@kernel.org>
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Turns out we can avoid the memmove() by using skip_spaces() and strim().
We did that in gpio-consumer, let's do it in gpio-sim.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Simplify the logic when checking the current live value against the user
input.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The WinSystems WS16C48 I/O address region spans offsets 0x0 through 0xA,
which is a total of 11 bytes. Fix the WS16C48_EXTENT define to the
correct value of 11 so that access to necessary device registers is
properly requested in the ws16c48_probe() callback by the
devm_request_region() function call.
Fixes: 2c05a0f29f ("gpio: ws16c48: Implement and utilize register structures")
Cc: stable@vger.kernel.org
Cc: Paul Demetrotion <pdemetrotion@winsystems.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Release the parent interrupt request during runtime suspend, allowing
the parent interrupt controller to enter runtime suspend if there are
no active users.
This change may not have a visible impact if the parent controller is
the GIC, but it can enable significant power savings for parent IRQ
controllers like IRQSteer inside a subsystem on i.MX8 SoCs. Releasing
the parent IRQ provides an opportunity for the subsystem to enter suspend
states if there are no active users.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
'devid' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
gpio-mxs.c:274:16: error: cast to smaller integer type 'enum mxs_gpio_id' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use of macro ARRAY_SIZE to calculate array size minimizes
the redundant code and improves code reusability.
This fixes warnings reported by Coccinelle:
drivers/gpio/gpio-imx-scu.c:106:32-33: WARNING: Use ARRAY_SIZE
Signed-off-by: Rajeshwar R Shinde <coolrrsh@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.
The WinSystems WS16C48 provides the following registers:
Offset 0x0-0x5: Port 0-5 I/O
Offset 0x6: Int_Pending
Offset 0x7: Page/Lock
Offset 0x8-0xA (Page 1): Pol_0-Pol_2
Offset 0x8-0xA (Page 2): Enab_0-Enab_2
Offset 0x8-0xA (Page 3): Int_ID0-Int_ID2
Port 0-5 I/O provides access to 48 lines of digital I/O across six
registers, each bit position corresponding to the respective line.
Writing a 1 to a respective bit position causes that output pin to sink
current, while writing a 0 to the same bit position causes that output
pin to go to a high-impedance state and allows it to be used an input.
Reads on a port report the inverted state (0 = high, 1 = low) of an I/O
pin when used in input mode. Interrupts are supported on Port 0-2.
Int_Pending is a read-only register that reports the combined state of
the INT_ID0 through INT_ID2 registers; an interrupt pending is indicated
when any of the low three bits are set.
The Page/Lock register provides the following bits:
Bit 0-5: Port 0-5 I/O Lock
Bit 6-7: Page 0-3 Selection
For Bits 0-5, writing a 1 to a respective bit position locks the output
state of the corresponding I/O port. Writing the page number to Bits 6-7
selects that respective register page for use.
Pol_0-Pol_2 are accessible when Page 1 is selected. Writing a 1 to a
respective bit position selects the rising edge detection interrupts for
that input line, while writing a 0 to the same bit position selects the
falling edge detection interrupts.
Enab_0-Enab_2 are accessible when Page 2 is selected. Writing a 1 to a
respective bit position enables interrupts for that input line, while
writing a 0 to that same bit position clears and disables interrupts for
that input line.
Int_ID0-Int_ID2 are accessible when Page 3 is selected. A respective bit
when read as a 1 indicates that an edge of the polarity set in the
corresponding polarity register was detected for the corresponding input
line. Writing any value to this register clears all pending interrupts
for the register.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/f59de81e80f7198bcfa9a15615c459c38b5d0e08.1680708357.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.
For the PCIe-IDIO-24 series of devices, the following BARs are
available:
BAR[0]: memory mapped PEX8311
BAR[1]: I/O mapped PEX8311
BAR[2]: I/O mapped card registers
There are 24 FET Output lines, 24 Isolated Input lines, and 8 TTL/CMOS
lines (which may be configured for either output or input). The GPIO
lines are exposed by the following card registers:
Base +0x0-0x2 (Read/Write): FET Outputs
Base +0xB (Read/Write): TTL/CMOS
Base +0x4-0x6 (Read): Isolated Inputs
Base +0x7 (Read): TTL/CMOS
In order for the device to support interrupts, the PLX PEX8311 internal
PCI wire interrupt and local interrupt input must first be enabled.
The following card registers for Change-Of-State may be used:
Base +0x8-0xA (Read): COS Status Inputs
Base +0x8-0xA (Write): COS Clear Inputs
Base +0xB (Read): COS Status TTL/CMOS
Base +0xB (Write): COS Clear TTL/CMOS
Base +0xE (Read/Write): COS Enable
The COS Enable register is used to enable/disable interrupts and
configure the interrupt levels; each bit maps to a group of eight inputs
as described below:
Bit 0: IRQ EN Rising Edge IN0-7
Bit 1: IRQ EN Rising Edge IN8-15
Bit 2: IRQ EN Rising Edge IN16-23
Bit 3: IRQ EN Rising Edge TTL0-7
Bit 4: IRQ EN Falling Edge IN0-7
Bit 5: IRQ EN Falling Edge IN8-15
Bit 6: IRQ EN Falling Edge IN16-23
Bit 7: IRQ EN Falling Edge TTL0-7
An interrupt is asserted when a change-of-state matching the interrupt
level configuration respective for a particular group of eight inputs
with enabled COS is detected.
The COS Status registers may be read to determine which inputs have
changed; if interrupts were enabled, an IRQ will be generated for the
set bits in these registers. Writing the value read from the COS Status
register back to the respective COS Clear register will clear just those
interrupts.
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/3091e387b1d2eac011a1d84e493663aa2acf982e.1680708357.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
All idio-16 library consumers have migrated to the new interface
leveraging the gpio-regmap API. Legacy interface functions and code are
removed as no longer needed.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/651cff1cc3eb57b455a8048121cf6a4d4367f018.1680618405.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver. Migrate the pci-idio-16 module to the new
idio-16 library interface leveraging the gpio-regmap API.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/5ba5405c64aca984d5cf3bdbdffa04c325e5a147.1680618405.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver. Migrate the 104-idio-16 module to the new
idio-16 library interface leveraging the gpio-regmap API.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/1f24a1f18c9a9daa4983713e0a5b53e838d624a8.1680618405.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.
By leveraging the regmap API, the idio-16 library is reduced to simply a
devm_idio_16_regmap_register() function and a configuration structure
struct idio_16_regmap_config.
Legacy functions and code will be removed once all consumers have
migrated to the new idio-16 library interface.
For IDIO-16 devices we have the following IRQ registers:
Base Address +1 (Write): Clear Interrupt
Base Address +2 (Read): Enable Interrupt
Base Address +2 (Write): Disable Interrupt
An interrupt is asserted whenever a change-of-state is detected on any
of the inputs. Any write to 0x2 will disable interrupts, while any read
will enable interrupts. Interrupts are cleared by a write to 0x1.
For 104-IDIO-16 devices, there is no IRQ status register, so software
has to assume that if an interrupt is raised then it was for the
104-IDIO-16 device.
For PCI-IDIO-16 devices, there is an additional IRQ register:
Base Address +6 (Read): Interrupt Status
Interrupt status can be read from 0x6 where bit 2 set indicates that an
IRQ has been generated.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/b45081958ab53dfa697f4a8b15f1bfba46718068.1680618405.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When comparing strings passed to us from configfs, we can pass the page
argument directly to sysfs_streq() and avoid manual string trimming.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr() here, and __maybe_unused can also be removed.
Even for drivers that do not depend on CONFIG_OF, it's almost always
better to leave out the of_match_ptr(), since the only thing it can
possibly do is to save a few bytes of .text if a driver can be used both
with and without it.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr() here, and __maybe_unused can also be removed.
Even for drivers that do not depend on CONFIG_OF, it's almost always
better to leave out the of_match_ptr(), since the only thing it can
possibly do is to save a few bytes of .text if a driver can be used both
with and without it.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver depends on CONFIG_OF, so it is not necessary to use CONFIG_OF
and of_match_ptr() here, we remove them all.
Even for drivers that do not depend on CONFIG_OF, it's almost always
better to leave out the of_match_ptr(), since the only thing it can
possibly do is to save a few bytes of .text if a driver can be used both
with and without it.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver depends on CONFIG_OF, so it is not necessary to use
CONFIG_OF and of_match_ptr() here, so we remove them all.
Even for drivers that do not depend on CONFIG_OF, it's almost always
better to leave out the of_match_ptr(), since the only thing it can
possibly do is to save a few bytes of .text if a driver can be used both
with and without it.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr() here.
Even for drivers that do not depend on CONFIG_OF, it's almost always
better to leave out the of_match_ptr(), since the only thing it can
possibly do is to save a few bytes of .text if a driver can be used both
with and without it. Hence we remove of_match_ptr().
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr() here.
Even for drivers that do not depend on CONFIG_OF, it's almost always
better to leave out the of_match_ptr(), since the only thing it can
possibly do is to save a few bytes of .text if a driver can be used both
with and without it. Hence we remove of_match_ptr().
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr() here.
Even for drivers that do not depend on CONFIG_OF, it's almost always
better to leave out the of_match_ptr(), since the only thing it can
possibly do is to save a few bytes of .text if a driver can be used both
with and without it. Hence we remove of_match_ptr().
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr() here. We remove both CONFIG_OF and of_match_ptr() here.
Even for drivers that do not depend on CONFIG_OF, it's almost always
better to leave out the of_match_ptr(), since the only thing it can
possibly do is to save a few bytes of .text if a driver can be used both
with and without it.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr() here.
Even for drivers that do not depend on CONFIG_OF, it's almost always
better to leave out the of_match_ptr(), since the only thing it can
possibly do is to save a few bytes of .text if a driver can be used both
with and without it. Hence we remove of_match_ptr().
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Since commit a85a6c86c2 ("driver core: platform: Clarify that IRQ 0
is invalid"), there is no possible for platform_get_irq() to return 0.
And the return value of platform_get_irq() is more sensible
to show the error reason.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Simulated chips use a mutex for synchronization in driver callbacks so
they must not be called from interrupt context. Set the can_sleep field
of the GPIO chip to true to force users to only use threaded irqs.
Fixes: cb8c474e79 ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This function call is not required because no counterpart
platform_get_drvdata() call is present to leverage the private data of
the driver.
Since the private data is confined to this driver file, external access
is not feasible.
The use of this function appears redundant in the current context of the
driver's implementation.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call, to access the private data of the driver.
Also, the private data is defined in this driver, so there is no risk of
it being accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The platform_set_drvdata() call was never used, ever since the driver was
originally added.
It looks like this copy+paste left-over. Possibly the author copied from a
driver that had this line, but also had a remove hook.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The platform_set_drvdata() isn't needed for anything. The function is a
simple setter that doesn't change anything in the code. That is because
there isn't a get function and since it has no dependencies it can be
removed.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The platform_set_drvdata() was needed when the driver had an explicit
remove function.
That function got removed a while back, so we don't need to keep a pointer
(on 'dev->driver_data') for the private data of the driver anymore.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The platform_set_drvdata() was needed when the driver had an explicit
remove function.
That function got removed a while back, so we don't need to keep a pointer
(on 'dev->driver_data') for the private data of the driver anymore.
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is no need to call the dev_err_probe() function directly to print
a custom message when handling an error from platform_get_irq() function as
it is going to display an appropriate error message in case of a failure.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The DS4520 is a 9-bit nonvolatile (NV) I/O expander.
It offers users a digitally programmable alternative
to hardware jumpers and mechanical switches that are
being used to control digital logic node.
Signed-off-by: Okan Sahin <okan.sahin@analog.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is no need to call the dev_err_probe() function directly to print
a custom message when handling an error from platform_get_irq() function as
it is going to display an appropriate error message in case of a failure.
And the code to handle bank->irq = 0 is redundant because
platform_get_irq() do not return 0.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The 104-DIO-48E features an 8254 Counter/Timer chip providing three
counter/timers which can be used for frequency measurement, frequency
output, pulse width modulation, pulse width measurement, event count,
etc. The counter/timers use the same addresses as PPI 0 (addresses 0x0
to 0x3), so a raw_spinlock_t is used to synchronize operations between
the two regmap mappings to prevent clobbering.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Driver is so simple, yet there was a room for mistakes.
Reduce their appearance in the future by enabling COMPILE_TEST
option.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Replace the GPLv2 boilerplate text with a nice and short
SPDX header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We have a temporary variable to keep pointer to struct device.
Utilise it inside the ->probe() implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is nothing in the driver that requires OF APIs,
make the driver OF independent.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Fix English spelling and grammar in the comments.
While at it, fix the MODULE_AUTHOR() email address format.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/r/65b4ac1a-1128-6e2a-92c0-9bbcca4b760a@infradead.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add missing platform_device.h that used to be implied by of_device.h.
While at it, sort headers alphabetically for better maintenance.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: e91d0f05e6 ("gpio: Explicitly include correct DT includes")
Closes: https://lore.kernel.org/r/65b4ac1a-1128-6e2a-92c0-9bbcca4b760a@infradead.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This can reduce the kernel image size in multiplatform configurations.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Do not parse the devicetree again when the data is already available
from the IRQ subsystem. This follows the example of the ThunderX and
X-Gene GPIO drivers. The ngpio check is needed to avoid a possible
out-of-bounds read.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
of_irq_count(), or eqivalently platform_irq_count(), simply looks up
successively-numbered IRQs until that fails. Since this driver needs to
look up each IRQ anyway to get its virq number, use that existing loop
to count the IRQs at the same time.
The check against SIFIVE_GPIO_MAX functioned as a bounds check for
chip->irq_number. That is now handled by the loop condition.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There is no need to convert dev->of_node back to a fwnode_handle.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
