Here is the big set of char/misc/iio and other smaller driver subsystems
for 6.17-rc1. It's a big set this time around, with the huge majority
being in the iio subsystem with new drivers and dts files being added
there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaIeYDg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk3dwCdF6xoEVZaDkLM5IF3XKWWgdYxjNsAoKUy2kUx
YtmVh4S0tMmugfeRGac7
=3Wxi
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO / other driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystems for 6.17-rc1. It's a big set this time around, with the
huge majority being in the iio subsystem with new drivers and dts
files being added there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
binder: Use seq_buf in binder_alloc kunit tests
binder: Add copyright notice to new kunit files
misc: ti_fpc202: Switch to of_fwnode_handle()
bus: moxtet: Use dev_fwnode()
pc104: move PC104 option to drivers/Kconfig
drivers: virt: acrn: Don't use %pK through printk
comedi: fix race between polling and detaching
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
mei: more prints with client prefix
mei: bus: use cldev in prints
bus: mhi: host: pci_generic: Add Telit FN990B40 modem support
bus: mhi: host: Detect events pointing to unexpected TREs
bus: mhi: host: pci_generic: Add Foxconn T99W696 modem
bus: mhi: host: Use str_true_false() helper
bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance.
bus: mhi: host: Fix endianness of BHI vector table
bus: mhi: host: pci_generic: Disable runtime PM for QDU100
bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
...
syzbot reports a use-after-free in comedi in the below link, which is
due to comedi gladly removing the allocated async area even though poll
requests are still active on the wait_queue_head inside of it. This can
cause a use-after-free when the poll entries are later triggered or
removed, as the memory for the wait_queue_head has been freed. We need
to check there are no tasks queued on any of the subdevices' wait queues
before allowing the device to be detached by the `COMEDI_DEVCONFIG`
ioctl.
Tasks will read-lock `dev->attach_lock` before adding themselves to the
subdevice wait queue, so fix the problem in the `COMEDI_DEVCONFIG` ioctl
handler by write-locking `dev->attach_lock` before checking that all of
the subdevices are safe to be deleted. This includes testing for any
sleepers on the subdevices' wait queues. It remains locked until the
device has been detached. This requires the `comedi_device_detach()`
function to be refactored slightly, moving the bulk of it into new
function `comedi_device_detach_locked()`.
Note that the refactor of `comedi_device_detach()` results in
`comedi_device_cancel_all()` now being called while `dev->attach_lock`
is write-locked, which wasn't the case previously, but that does not
matter.
Thanks to Jens Axboe for diagnosing the problem and co-developing this
patch.
Cc: stable <stable@kernel.org>
Fixes: 2f3fdcd7ce ("staging: comedi: add rw_semaphore to protect against device detachment")
Link: https://lore.kernel.org/all/687bd5fe.a70a0220.693ce.0091.GAE@google.com/
Reported-by: syzbot+01523a0ae5600aef5895@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=01523a0ae5600aef5895
Co-developed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Tested-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20250722155316.27432-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some Comedi subdevice instruction handlers are known to access
instruction data elements beyond the first `insn->n` elements in some
cases. The `do_insn_ioctl()` and `do_insnlist_ioctl()` functions
allocate at least `MIN_SAMPLES` (16) data elements to deal with this,
but they do not initialize all of that. For Comedi instruction codes
that write to the subdevice, the first `insn->n` data elements are
copied from user-space, but the remaining elements are left
uninitialized. That could be a problem if the subdevice instruction
handler reads the uninitialized data. Ensure that the first
`MIN_SAMPLES` elements are initialized before calling these instruction
handlers, filling the uncopied elements with 0. For
`do_insnlist_ioctl()`, the same data buffer elements are used for
handling a list of instructions, so ensure the first `MIN_SAMPLES`
elements are initialized for each instruction that writes to the
subdevice.
Fixes: ed9eccbe89 ("Staging: add comedi core")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250707161439.88385-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The handling of the `COMEDI_INSNLIST` ioctl allocates a kernel buffer to
hold the array of `struct comedi_insn`, getting the length from the
`n_insns` member of the `struct comedi_insnlist` supplied by the user.
The allocation will fail with a WARNING and a stack dump if it is too
large.
Avoid that by failing with an `-EINVAL` error if the supplied `n_insns`
value is unreasonable.
Define the limit on the `n_insns` value in the `MAX_INSNS` macro. Set
this to the same value as `MAX_SAMPLES` (65536), which is the maximum
allowed sum of the values of the member `n` in the array of `struct
comedi_insn`, and sensible comedi instructions will have an `n` of at
least 1.
Reported-by: syzbot+d6995b62e5ac7d79557a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d6995b62e5ac7d79557a
Fixes: ed9eccbe89 ("Staging: add comedi core")
Tested-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250704120405.83028-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Depending on the driver, the acquisition buffer is allocated either from
normal memory, or from DMA coherent memory. For normal memory, the
buffer is allocated as individual pages, but for DMA coherent memory, it
is allocated as a single block. Prior to commit e36472145a ("staging:
comedi: use dma_mmap_coherent for DMA-able buffer mmap"), the buffer was
allocated as individual pages for DMA coherent memory too, but that was
changed to allocate it as a single block to allow `dma_mmap_coherent()`
to be used to mmap it, because that requires the pages being mmap'ed to
be contiguous.
This patch allocates the buffer from DMA coherent memory a page at a
time again, and works around the limitation of `dma_mmap_coherent()` by
calling it in a loop for each page, with temporarily modified `vm_start`
and `vm_end` values in the VMA. (The `vm_pgoff` value is 0.)
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250415114008.5977-5-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The aim is to get rid of the `prealloc_buf` member of `struct
comedi_async` and access the buffer contents on a page-by-page basis
using the addresses in the `virt_addr` member of `struct
comedi_buf_page`. This will allow us to eliminate a `vmap()` that maps
the whole buffer.
Since the buffer pages have non-consecutive `virt_addr` addresses in
virtual memory (except for drivers using DMA), change the loops that
access buffer data to access it page-by-page.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250415114008.5977-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If some remap_pfn_range() calls succeeded before one failed, we still have
buffer pages mapped into the userspace page tables when we drop the buffer
reference with comedi_buf_map_put(bm). The userspace mappings are only
cleaned up later in the mmap error path.
Fix it by explicitly flushing all mappings in our VMA on the error path.
See commit 79a61cc3fc ("mm: avoid leaving partial pfn mappings around in
error case").
Cc: stable@vger.kernel.org
Fixes: ed9eccbe89 ("Staging: add comedi core")
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20241017-comedi-tlb-v3-1-16b82f9372ce@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
comedi_fops.c utilizes memdup_user() to copy a userspace array.
The new function memdup_array_user() provides a standardized way to copy
userspace-arrays. It makes it easier to see that an array is being
copied and, additionally, performs a generic overflow-check which might
help make the code more robust in case of changes in the future.
Replace memdup_user() with memdup_array_user().
Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20231103112932.75795-2-pstanner@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Ivan Orlov <ivan.orlov0322@gmail.com>
Cc: Xuezhi Zhang <zhangxuezhi1@coolpad.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620144137.581406-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
something. So just remove it and fix up all callers of the function in
the kernel tree at the same time.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Comedi INSN_CONFIG instructions have different expected instructtion
data lengths depending on the type of configuration instruction
specified by the first word of data. This is checked by
`check_insn_config_length()`. There are a few configuration
instructions whose data lengths are not currently checked, usually for
rare configuration instructions that are implemented differently by
different drivers. For unknown configuration instructions, the function
logs a warning and accepts the specified data length.
The `INSN_CONFIG_GET_PWM_OUTPUT` configuration instruction length is not
currently checked, but all the places it is currently used expect a data
length of 3. (These places are `ni_get_pwm_config()` in
"ni_mio_common.c", and `pci1760_pwm_insn_config()` in "adv_pci1760.c".)
Make this length official by checking it in
`check_insn_config_length()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230103151127.19287-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Follow the advice of the Documentation/filesystems/sysfs.rst
and show() should only use sysfs_emit() or sysfs_emit_at()
when formatting the value to be returned to user space.
Signed-off-by: Xuezhi Zhang <zhangxuezhi1@coolpad.com>
Link: https://lore.kernel.org/r/20220901013423.418464-1-zhangxuezhi3@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the main COMEDI driver headers out of "drivers/comedi/" into new
directory "include/linux/comedi/". These are "comedidev.h",
"comedilib.h", "comedi_pci.h", "comedi_pcmcia.h", and "comedi_usb.h".
Additionally, move the user-space API header "comedi.h" into
"include/uapi/linux/" and add "WITH Linux-syscall-note" to its
SPDX-License-Identifier.
Update the "COMEDI DRIVERS" section of the MAINTAINERS file to account
for these changes.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211117120604.117740-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`compat_insnlist()` handles the 32-bit version of the `COMEDI_INSNLIST`
ioctl (whenwhen `CONFIG_COMPAT` is enabled). It allocates memory to
temporarily hold an array of `struct comedi_insn` converted from the
32-bit version in user space. This memory is only being freed if there
is a fault while filling the array, otherwise it is leaked.
Add a call to `kfree()` to fix the leak.
Fixes: b8d47d8813 ("comedi: get rid of compat_alloc_user_space() mess in COMEDI_INSNLIST compat")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-staging@lists.linux.dev
Cc: <stable@vger.kernel.org> # 5.13+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210916145023.157479-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi code came into the kernel back in 2008, but traces its
lifetime to much much earlier. It's been polished and buffed and
there's really nothing preventing it from being part of the "real"
portion of the kernel.
So move it to drivers/comedi/ as it belongs there.
Many thanks to the hundreds of developers who did the work to make this
happen.
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Link: https://lore.kernel.org/r/YHauop4u3sP6lz8j@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
