- The 4 patch series "mm: ksm: prevent KSM from breaking merging of new
VMAs" from Lorenzo Stoakes addresses an issue with KSM's
PR_SET_MEMORY_MERGE mode: newly mapped VMAs were not eligible for
merging with existing adjacent VMAs.
- The 4 patch series "mm/damon: introduce DAMON_STAT for simple and
practical access monitoring" from SeongJae Park adds a new kernel module
which simplifies the setup and usage of DAMON in production
environments.
- The 6 patch series "stop passing a writeback_control to swap/shmem
writeout" from Christoph Hellwig is a cleanup to the writeback code
which removes a couple of pointers from struct writeback_control.
- The 7 patch series "drivers/base/node.c: optimization and cleanups"
from Donet Tom contains largely uncorrelated cleanups to the NUMA node
setup and management code.
- The 4 patch series "mm: userfaultfd: assorted fixes and cleanups" from
Tal Zussman does some maintenance work on the userfaultfd code.
- The 5 patch series "Readahead tweaks for larger folios" from Ryan
Roberts implements some tuneups for pagecache readahead when it is
reading into order>0 folios.
- The 4 patch series "selftests/mm: Tweaks to the cow test" from Mark
Brown provides some cleanups and consistency improvements to the
selftests code.
- The 4 patch series "Optimize mremap() for large folios" from Dev Jain
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
- The 5 patch series "Remove zero_user()" from Matthew Wilcox expunges
zero_user() in favor of the more modern memzero_page().
- The 3 patch series "mm/huge_memory: vmf_insert_folio_*() and
vmf_insert_pfn_pud() fixes" from David Hildenbrand addresses some warts
which David noticed in the huge page code. These were not known to be
causing any issues at this time.
- The 3 patch series "mm/damon: use alloc_migrate_target() for
DAMOS_MIGRATE_{HOT,COLD" from SeongJae Park provides some cleanup and
consolidation work in DAMON.
- The 3 patch series "use vm_flags_t consistently" from Lorenzo Stoakes
uses vm_flags_t in places where we were inappropriately using other
types.
- The 3 patch series "mm/memfd: Reserve hugetlb folios before
allocation" from Vivek Kasireddy increases the reliability of large page
allocation in the memfd code.
- The 14 patch series "mm: Remove pXX_devmap page table bit and pfn_t
type" from Alistair Popple removes several now-unneeded PFN_* flags.
- The 5 patch series "mm/damon: decouple sysfs from core" from SeongJae
Park implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
- The 5 patch series "madvise cleanup" from Lorenzo Stoakes does quite a
lot of cleanup/maintenance work in the madvise() code.
- The 4 patch series "madvise anon_name cleanups" from Vlastimil Babka
provides additional cleanups on top or Lorenzo's effort.
- The 11 patch series "Implement numa node notifier" from Oscar Salvador
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory on/offline
notifier.
- The 6 patch series "Make MIGRATE_ISOLATE a standalone bit" from Zi Yan
cleans up the pageblock isolation code and fixes a potential issue which
doesn't seem to cause any problems in practice.
- The 5 patch series "selftests/damon: add python and drgn based DAMON
sysfs functionality tests" from SeongJae Park adds additional drgn- and
python-based DAMON selftests which are more comprehensive than the
existing selftest suite.
- The 5 patch series "Misc rework on hugetlb faulting path" from Oscar
Salvador fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
- The 3 patch series "cma: factor out allocation logic from
__cma_declare_contiguous_nid" from Mike Rapoport rationalizes and cleans
up the highmem-specific code in the CMA allocator.
- The 28 patch series "mm/migration: rework movable_ops page migration
(part 1)" from David Hildenbrand provides cleanups and
future-preparedness to the migration code.
- The 2 patch series "mm/damon: add trace events for auto-tuned
monitoring intervals and DAMOS quota" from SeongJae Park adds some
tracepoints to some DAMON auto-tuning code.
- The 6 patch series "mm/damon: fix misc bugs in DAMON modules" from
SeongJae Park does that.
- The 6 patch series "mm/damon: misc cleanups" from SeongJae Park also
does what it claims.
- The 4 patch series "mm: folio_pte_batch() improvements" from David
Hildenbrand cleans up the large folio PTE batching code.
- The 13 patch series "mm/damon/vaddr: Allow interleaving in
migrate_{hot,cold} actions" from SeongJae Park facilitates dynamic
alteration of DAMON's inter-node allocation policy.
- The 3 patch series "Remove unmap_and_put_page()" from Vishal Moola
provides a couple of page->folio conversions.
- The 4 patch series "mm: per-node proactive reclaim" from Davidlohr
Bueso implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
- The 14 patch series "mm/damon: remove damon_callback" from SeongJae
Park replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
- The 10 patch series "mm/mremap: permit mremap() move of multiple VMAs"
from Lorenzo Stoakes implements a number of mremap cleanups (of course)
in preparation for adding new mremap() functionality: newly permit the
remapping of multiple VMAs when the user is specifying MREMAP_FIXED. It
still excludes some specialized situations where this cannot be
performed reliably.
- The 3 patch series "drop hugetlb_free_pgd_range()" from Anthony Yznaga
switches some sparc hugetlb code over to the generic version and removes
the thus-unneeded hugetlb_free_pgd_range().
- The 4 patch series "mm/damon/sysfs: support periodic and automated
stats update" from SeongJae Park augments the present
userspace-requested update of DAMON sysfs monitoring files. Automatic
update is now provided, along with a tunable to control the update
interval.
- The 4 patch series "Some randome fixes and cleanups to swapfile" from
Kemeng Shi does what is claims.
- The 4 patch series "mm: introduce snapshot_page" from Luiz Capitulino
and David Hildenbrand provides (and uses) a means by which debug-style
functions can grab a copy of a pageframe and inspect it locklessly
without tripping over the races inherent in operating on the live
pageframe directly.
- The 6 patch series "use per-vma locks for /proc/pid/maps reads" from
Suren Baghdasaryan addresses the large contention issues which can be
triggered by reads from that procfs file. Latencies are reduced by more
than half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
- The 6 patch series "__folio_split() clean up" from Zi Yan cleans up
__folio_split()!
- The 7 patch series "Optimize mprotect() for large folios" from Dev
Jain provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
- The 2 patch series "selftests/mm: reuse FORCE_READ to replace "asm
volatile("" : "+r" (XXX));" and some cleanup" from wang lian does some
cleanup work in the selftests code.
- The 3 patch series "tools/testing: expand mremap testing" from Lorenzo
Stoakes extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
- The 22 patch series "selftests/damon/sysfs.py: test all parameters"
from SeongJae Park extends the DAMON sysfs interface selftest so that it
tests all possible user-requested parameters. Rather than the present
minimal subset.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaIqcCgAKCRDdBJ7gKXxA
jkVBAQCCn9DR1QP0CRk961ot0cKzOgioSc0aA03DPb2KXRt2kQEAzDAz0ARurFhL
8BzbvI0c+4tntHLXvIlrC33n9KWAOQM=
=XsFy
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
Instead of having the core code guess the note name for each regset,
use USER_REGSET_NOTE_TYPE() to pick the correct name from elf.h.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: linux-openrisc@vger.kernel.org
Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20250701135616.29630-14-Dave.Martin@arm.com
Signed-off-by: Kees Cook <kees@kernel.org>
walk_page_range_novma() is rather confusing - it supports two modes, one
used often, the other used only for debugging.
The first mode is the common case of traversal of kernel page tables,
which is what nearly all callers use this for.
Secondly it provides an unusual debugging interface that allows for the
traversal of page tables in a userland range of memory even for that
memory which is not described by a VMA.
It is far from certain that such page tables should even exist, but
perhaps this is precisely why it is useful as a debugging mechanism.
As a result, this is utilised by ptdump only. Historically, things were
reversed - ptdump was the only user, and other parts of the kernel evolved
to use the kernel page table walking here.
Since we have some complicated and confusing locking rules for the novma
case, it makes sense to separate the two usages into their own functions.
Doing this also provide self-documentation as to the intent of the caller
- are they doing something rather unusual or are they simply doing a
standard kernel page table walk?
We therefore establish two separate functions - walk_page_range_debug()
for this single usage, and walk_kernel_page_table_range() for general
kernel page table walking.
The walk_page_range_debug() function is currently used to traverse both
userland and kernel mappings, so we maintain this and in the case of
kernel mappings being traversed, we have walk_page_range_debug() invoke
walk_kernel_page_table_range() internally.
We additionally make walk_page_range_debug() internal to mm.
Link: https://lkml.kernel.org/r/20250605135104.90720-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Barry Song <baohua@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The extra-y syntax is deprecated. Instead, use always-$(KBUILD_BUILTIN),
which behaves equivalently.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Add cacheinfo support for OpenRISC.
Currently, a few CPU cache attributes pertaining to OpenRISC processors
are exposed along with other unrelated CPU attributes in the procfs file
system (/proc/cpuinfo). However, a few cache attributes remain unexposed.
Provide a mechanism that the generic cacheinfo infrastructure can employ
to expose these attributes via the sysfs file system. These attributes
can then be exposed in /sys/devices/system/cpu/cpuX/cache/indexN. Move
the implementation to pull cache attributes from the processor's
registers from arch/openrisc/kernel/setup.c with a few modifications.
This implementation is based on similar work done for MIPS and LoongArch.
Link: https://raw.githubusercontent.com/openrisc/doc/master/openrisc-arch-1.4-rev0.pdf
Signed-off-by: Sahil Siddiq <sahilcdq0@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
According to the OpenRISC architecture manual, the dcache and icache may
not be present. When these caches are present, the invalidate and flush
registers may be absent. The current implementation does not perform
checks to verify their presence before utilizing cache registers, or
invalidating and flushing cache blocks.
Introduce new functions to detect the presence of cache components and
related special-purpose registers.
There are a few places where a range of addresses have to be flushed or
invalidated and the implementation is duplicated. Introduce new utility
functions and macros that generalize this implementation and reduce
duplication.
Signed-off-by: Sahil Siddiq <sahilcdq0@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The "cpuinfo_or1k" structure currently has identical data members for
different cache components.
Remove these fields out of struct cpuinfo_or1k and into its own struct.
This reduces duplication while keeping cpuinfo_or1k extensible so more
cache descriptors can be added in the future.
Also add a new field "sets" to the new structure.
Signed-off-by: Sahil Siddiq <sahilcdq0@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Implement support for restartable sequences on OpenRISC by doing:
- Select HAVE_RSEQ in Kconfig
- Call rseq_syscall() on return to userspace when CONFIG_DEBUG_RSEQ
is enabled.
- Call rseq_signal_deliver() to fixup the pre-signal stack frame when a
signal is delivered on top of a restartable sequence critical section
Cc: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Support for HAVE_REGS_AND_STACK_ACCESS_API needed for restartable
sequences.
The implementation has been copied from riscv and tested with the
restartable sequences self tests.
Note, pt-regs members are 'long' on openrisc which require casts for the
api, someday we should try to update these to be 'unsigned long' as
that's what they really are.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
[stafford: Updated commit message]
Signed-off-by: Stafford Horne <shorne@gmail.com>
Align all line continuations and (sub)section headers in a consistent
way.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Since commit 0043ecea23 ("vmlinux.lds.h: Adjust symbol ordering in
text output section"), the exception table in arch/openrisc/kernel/head.S
is no longer positioned at the very beginning of the kernel image, which
causes a boot failure.
Currently, the exception table resides in the regular .text section.
Previously, it was placed at the head by relying on the linker receiving
arch/openrisc/kernel/head.o as the first object. However, this behavior
has changed because sections like .text.{asan,unknown,unlikely,hot} now
precede the regular .text section.
The .head.text section is intended for entry points requiring special
placement. However, in OpenRISC, this section has been misused: instead
of the entry points, it contains boot code meant to be discarded after
booting. This feature is typically handled by the .init.text section.
This commit addresses the issue by replacing the current __HEAD marker
with __INIT and re-annotating the entry points with __HEAD. Additionally,
it adds __REF to entry.S to suppress the following modpost warning:
WARNING: modpost: vmlinux: section mismatch in reference: _tng_kernel_start+0x70 (section: .text) -> _start (section: .init.text)
Fixes: 0043ecea23 ("vmlinux.lds.h: Adjust symbol ordering in text output section")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/5e032233-5b65-4ad5-ac50-d2eb6c00171c@roeck-us.net/#t
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rong Xu <xur@google.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
__pa() is only intended to be used for linear map addresses and using
it for initial_boot_params which is in fixmap for arm64 will give an
incorrect value. Hence save the physical address when it is known at
boot time when calling early_init_dt_scan for arm64 and use it at kexec
time instead of converting the virtual address using __pa().
Note that arm64 doesn't need the FDT region reserved in the DT as the
kernel explicitly reserves the passed in FDT. Therefore, only a debug
warning is fixed with this change.
Reported-by: Breno Leitao <leitao@debian.org>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Fixes: ac10be5cdb ("arm64: Use common of_kexec_alloc_and_setup_fdt()")
Link: https://lore.kernel.org/r/20241023171426.452688-1-usamaarif642@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The uapi/asm/unistd_32.h and asm/syscall_table_32.h headers can now be
generated from scripts/syscall.tbl, which makes this consistent with
the other architectures that have their own syscall.tbl.
openrisc has one extra system call that gets added to scripts/syscall.tbl.
The time32, stat64, rlimit and renameat entries in the syscall_abis_32
line are for system calls that were part of the generic ABI when
arch/nios2 got added but are no longer enabled by default for new
architectures.
Both the user visible side of asm/unistd.h and the internal syscall
table in the kernel should have the same effective contents after this.
When asm/syscalls.h is included in kernel/fork.c for the purpose of
type checking, the redirection macros cause problems. Move these so
only the references get redirected.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
My original, naive, FPU support patch had the FPCSR register stored
during both the *mode switch* and *context switch*. This is wasteful.
Also, the original patches did not save the FPU state when handling
signals during the system call fast path.
We fix this by moving the FPCSR state to thread_struct in task_struct.
We also introduce new helper functions save_fpu and restore_fpu which
can be used to sync the FPU with thread_struct. These functions are now
called when needed:
- Setting up and restoring sigcontext when handling signals
- Before and after __switch_to during context switches
- When handling FPU exceptions
- When reading and writing FPU register sets
In the future we can further optimize this by doing lazy FPU save and
restore. For example, FPU sync is not needed when switching to and from
kernel threads (x86 does this). FPU save and restore does not need to
be done two times if we have both rescheduling and signal work to do.
However, since OpenRISC FPU state is a single register, I leave these
optimizations for future consideration.
Signed-off-by: Stafford Horne <shorne@gmail.com>
OpenRISC exception handling sends signals to user processes on floating
point exceptions and trap instructions (for debugging) among others.
There is a bug where the trap handling logic may send signals to kernel
threads, we should not send these signals to kernel threads, if that
happens we treat it as an error.
This patch adds conditions to die if the kernel receives these
exceptions in kernel mode code.
Fixes: 27267655c5 ("openrisc: Support floating point user api")
Signed-off-by: Stafford Horne <shorne@gmail.com>
The die function calls show_registers unconditionally. Remove calls to
show_registers before calling die to avoid printing all registers and
stack status two times during a crash.
This was found when testing kernel trap and floating point exception
handling.
Signed-off-by: Stafford Horne <shorne@gmail.com>
The pr_* macros are the convention and my upcoming patches add even more
printk's. Use this opportunity to convert the printks in this file to
the pr_* macros to avoid patch check warnings.
Signed-off-by: Stafford Horne <shorne@gmail.com>
When testing modules in OpenRISC I found R_OR1K_AHI16 (signed adjusted
high 16-bit) and R_OR1K_SLO16 (split low 16-bit) relocations are used in
modules but not implemented yet.
This patch implements the relocations. I have tested with a few modules.
Signed-off-by: Stafford Horne <shorne@gmail.com>
This defines the current OpenRISC relocation types using the current
R_OR1K_* naming conventions.
The old R_OR32_* definitions are left for backwards compatibility.
Note, the R_OR32_VTENTRY and R_OR32_VTINHERIT macros were defined with
the wrong values the have always been 7 and 8 respectively, not 8 and 7.
They are not used for module loading and I have updated them to use the
correct values.
Signed-off-by: Stafford Horne <shorne@gmail.com>
After commit 14c5678720 ("power: reset: syscon-poweroff: Use
devm_register_sys_off_handler(POWER_OFF)") setting up of pm_power_off
was removed from the driver, this causes OpenRISC platforms using
syscon-poweroff to no longer shutdown.
The kernel now supports chained power-off handlers. Use
do_kernel_power_off() that invokes chained power-off handlers. All
architectures have moved away from using pm_power_off except OpenRISC.
This patch migrates openrisc to use do_kernel_power_off() instead of the
legacy pm_power_off().
Fixes: 14c5678720 ("power: reset: syscon-poweroff: Use devm_register_sys_off_handler(POWER_OFF)")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Just a few cleanups and updates that were sent in:
- Replace asm/fixmap.h with asm-generic version
- Fix to move memblock setup up before it's used during init
-----BEGIN PGP SIGNATURE-----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=onUw
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"Just a few cleanups and updates that were sent in:
- Replace asm/fixmap.h with asm-generic version
- Fix to move memblock setup up before it's used during init"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: Use asm-generic's version of fix_to_virt() & virt_to_fix()
openrisc: Call setup_memory() earlier in the init sequence
The unflatten_and_copy_device_tree() function contains a call to
memblock_alloc(). This means that memblock is allocating memory before
any of the reserved memory regions are set aside in the setup_memory()
function which calls early_init_fdt_scan_reserved_mem(). Therefore,
there is a possibility for memblock to allocate from any of the
reserved memory regions.
Hence, move the call to setup_memory() to be earlier in the init
sequence so that the reserved memory regions are set aside before any
allocations are done using memblock.
Signed-off-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
There is no point in having seven architectures implementing the same empty
stub.
Provide a weak function in the init code and remove the stubs.
This also allows to utilize the function on UP which is required to
sanitize the per CPU handling on X86 UP.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240304005104.567671691@linutronix.de
When compiling with W=1 enabling -Wmissing-prototypes the compiler
warns:
arch/openrisc/kernel/traps.c:146:6: error: no previous prototype for 'nommu_dump_state' [-Werror=missing-prototypes]
This function is not used so remove it.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/linux-kernel/20230810141947.1236730-17-arnd@kernel.org/
Signed-off-by: Stafford Horne <shorne@gmail.com>
When compiling with W=1 enabling -Wmissing-prototypes the compiler
warns:
arch/openrisc/kernel/process.c💯6: error: no previous prototype for 'arch_cpu_idle' [-Werror=missing-prototypes]
arch/openrisc/kernel/process.c:240:21: error: no previous prototype for '__switch_to' [-Werror=missing-prototypes]
Fix these by adding the approrpiate header files to process.c which
brings in the prototype definitions.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/linux-kernel/20230810141947.1236730-17-arnd@kernel.org/
Signed-off-by: Stafford Horne <shorne@gmail.com>
When compiling with W=1 enabling -Wmissing-prototypes the compiler
warns:
arch/openrisc/kernel/traps.c:221:17: sing-prototypesrror: no previous prototype for 'die' [-Werror=missing-prototypes]
Fix by adding the prototype to the appropriate header file and including
the header file in the appropriate C files.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/linux-kernel/20230810141947.1236730-17-arnd@kernel.org/
Signed-off-by: Stafford Horne <shorne@gmail.com>
When compiling with W=1 enabling -Wmissing-prototypes the compiler
warns:
arch/openrisc/kernel/traps.c:67:6: error: no previous prototype for 'show_registers' [-Werror=missing-prototypes]
Fix by adding the prototype to the appropriate header file and including
the header file in the appropriate C files.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/linux-kernel/20230810141947.1236730-17-arnd@kernel.org/
Signed-off-by: Stafford Horne <shorne@gmail.com>
When compiling with W=1 enabling -Wmissing-prototypes the compiler
warns:
arch/openrisc/kernel/signal.c:227:5: error: no previous prototype for 'do_signal' [-Werror=missing-prototypes]
Fix this by declaring the function a static as it is not used outside of
the scope of this file.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/linux-kernel/20230810141947.1236730-17-arnd@kernel.org/
Signed-off-by: Stafford Horne <shorne@gmail.com>
These functions are all called from assembly files so there is no need
for a prototype in a header file, but when compiling with W=1 enabling
-Wmissing-prototypes the compiler warns:
arch/openrisc/kernel/ptrace.c:191:17: error: no previous prototype for 'do_syscall_trace_enter' [-Werror=missing-prototypes]
arch/openrisc/kernel/ptrace.c:210:17: error: no previous prototype for 'do_syscall_trace_leave' [-Werror=missing-prototypes]
arch/openrisc/kernel/signal.c:293:1: error: no previous prototype for 'do_work_pending' [-Werror=missing-prototypes]
arch/openrisc/kernel/signal.c:68:17: error: no previous prototype for '_sys_rt_sigreturn' [-Werror=missing-prototypes]
arch/openrisc/kernel/time.c:111:25: error: no previous prototype for 'timer_interrupt' [-Werror=missing-prototypes]
arch/openrisc/kernel/traps.c:239:17: error: no previous prototype for 'unhandled_exception' [-Werror=missing-prototypes]
arch/openrisc/kernel/traps.c:246:17: error: no previous prototype for 'do_fpe_trap' [-Werror=missing-prototypes]
arch/openrisc/kernel/traps.c:268:17: error: no previous prototype for 'do_trap' [-Werror=missing-prototypes]
arch/openrisc/kernel/traps.c:273:17: error: no previous prototype for 'do_unaligned_access' [-Werror=missing-prototypes]
arch/openrisc/kernel/traps.c:286:17: error: no previous prototype for 'do_bus_fault' [-Werror=missing-prototypes]
arch/openrisc/kernel/traps.c:462:17: error: no previous prototype for 'do_illegal_instruction' [-Werror=missing-prototypes]
arch/openrisc/mm/fault.c:44:17: error: no previous prototype for 'do_page_fault' [-Werror=missing-prototypes]
Since these are not needed in header files, fix these by adding
prototypes to the top of the respective C files.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/linux-kernel/20230810141947.1236730-17-arnd@kernel.org/
Signed-off-by: Stafford Horne <shorne@gmail.com>
With commit 27267655c5 ("openrisc: Support floating point user api") I
added an entry to the struct sigcontext which caused an unwanted change
to the userspace ABI.
To fix this we use the previously unused oldmask field space for the
floating point fpcsr state. We do this with a union to restore the ABI
back to the pre kernel v6.4 ABI and keep API compatibility.
This does mean if there is some code somewhere that is setting oldmask
in an OpenRISC specific userspace sighandler it would end up setting the
floating point register status, but I think it's unlikely as oldmask was
never functional before.
Fixes: 27267655c5 ("openrisc: Support floating point user api")
Reported-by: Szabolcs Nagy <nsz@port70.net>
Closes: https://lore.kernel.org/openrisc/20230626213840.GA1236108@port70.net/
Signed-off-by: Stafford Horne <shorne@gmail.com>
Two things for OpenRISC this cycle.
- Small cleanup for device tree cpu iteration from Rob Herring
- Add support for storing, restoring and accessing user space FPU state, to
allow for libc to support the FPU on OpenRISC.
-----BEGIN PGP SIGNATURE-----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=N9eu
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"Two things for OpenRISC this cycle:
- Small cleanup for device tree cpu iteration from Rob Herring
- Add support for storing, restoring and accessing user space FPU
state, to allow for libc to support the FPU on OpenRISC"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: Add floating point regset
openrisc: Support floating point user api
openrisc: Support storing and restoring fpu state
openrisc: Properly store r31 to pt_regs on unhandled exceptions
openrisc: Use common of_get_cpu_node() instead of open-coding
Define REGSET_FPU to allow reading and writing the FPCSR fpu state
register. This will be used primarily by debuggers like GDB.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Add support for handling floating point exceptions and forwarding the
SIGFPE signal to processes. Also, add fpu state to sigcontext.
Signed-off-by: Stafford Horne <shorne@gmail.com>
OpenRISC floating point state is not so expensive to save as OpenRISC uses
general purpose registers for floating point instructions. We need to save
only the floating point status and control register, FPCSR.
Add support to maintain the FPCSR unconditionally upon exceptions and
switches. On machines that do not support FPU this will always just
store 0x0 and restore is a no-op. On FPU systems this adds an
additional special purpose register read/write and read/write to memory
(already cached).
Signed-off-by: Stafford Horne <shorne@gmail.com>
In commit 91993c8c2e ("openrisc: use shadow registers to save regs on
exception") the unhandled exception path was changed to do an early
store of r30 instead of r31. The entry code was not updated and r31 is
not getting stored to pt_regs.
This patch updates the entry handler to store r31 instead of r30. We
also remove some misleading commented out store r30 and r31
instructrions.
I noticed this while working on adding floating point exception
handling, This issue probably would never impact anything since we kill
the process or Oops right away on unhandled exceptions.
Fixes: 91993c8c2e ("openrisc: use shadow registers to save regs on exception")
Signed-off-by: Stafford Horne <shorne@gmail.com>
The common of_get_cpu_node() is equivalent to setup_find_cpu_node(), so
use it instead.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
To be able to trace invocations of smp_send_reschedule(), rename the
arch-specific definitions of it to arch_smp_send_reschedule() and wrap it
into an smp_send_reschedule() that contains a tracepoint.
Changes to include the declaration of the tracepoint were driven by the
following coccinelle script:
@func_use@
@@
smp_send_reschedule(...);
@include@
@@
#include <trace/events/ipi.h>
@no_include depends on func_use && !include@
@@
#include <...>
+
+ #include <trace/events/ipi.h>
[csky bits]
[riscv bits]
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230307143558.294354-6-vschneid@redhat.com
Current arch_cpu_idle() is called with IRQs disabled, but will return
with IRQs enabled.
However, the very first thing the generic code does after calling
arch_cpu_idle() is raw_local_irq_disable(). This means that
architectures that can idle with IRQs disabled end up doing a
pointless 'enable-disable' dance.
Therefore, push this IRQ disabling into the idle function, meaning
that those architectures can avoid the pointless IRQ state flipping.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Acked-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.618076436@infradead.org
Idle code is very like entry code in that RCU isn't available. As
such, add a little validation.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230112195540.373461409@infradead.org
user_regset_copyin_ignore() always returns 0, so checking its result seems
pointless -- don't do this anymore...
Link: https://lkml.kernel.org/r/20221014212235.10770-9-s.shtylyov@omp.ru
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I have relocated to London so not much work from me while I get settled.
Still, OpenRISC picked up two patches in this window:
- Fix for kernel page table walking from Jann Horn
- MAINTAINER entry cleanup from Palmer Dabbelt
-----BEGIN PGP SIGNATURE-----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=WKxB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"I have relocated to London so not much work from me while I get
settled.
Still, OpenRISC picked up two patches in this window:
- Fix for kernel page table walking from Jann Horn
- MAINTAINER entry cleanup from Palmer Dabbelt"
* tag 'for-linus' of https://github.com/openrisc/linux:
MAINTAINERS: git://github -> https://github.com for openrisc
openrisc: Fix pagewalk usage in arch_dma_{clear, set}_uncached
- Valentin Schneider makes crash-kexec work properly when invoked from
an NMI-time panic.
- ntfs bugfixes from Hawkins Jiawei
- Jiebin Sun improves IPC msg scalability by replacing atomic_t's with
percpu counters.
- nilfs2 cleanups from Minghao Chi
- lots of other single patches all over the tree!
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0Yf0gAKCRDdBJ7gKXxA
joapAQDT1d1zu7T8yf9cQXkYnZVuBKCjxKE/IsYvqaq1a42MjQD/SeWZg0wV05B8
DhJPj9nkEp6R3Rj3Mssip+3vNuceAQM=
=lUQY
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- hfs and hfsplus kmap API modernization (Fabio Francesco)
- make crash-kexec work properly when invoked from an NMI-time panic
(Valentin Schneider)
- ntfs bugfixes (Hawkins Jiawei)
- improve IPC msg scalability by replacing atomic_t's with percpu
counters (Jiebin Sun)
- nilfs2 cleanups (Minghao Chi)
- lots of other single patches all over the tree!
* tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
include/linux/entry-common.h: remove has_signal comment of arch_do_signal_or_restart() prototype
proc: test how it holds up with mapping'less process
mailmap: update Frank Rowand email address
ia64: mca: use strscpy() is more robust and safer
init/Kconfig: fix unmet direct dependencies
ia64: update config files
nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure
fork: remove duplicate included header files
init/main.c: remove unnecessary (void*) conversions
proc: mark more files as permanent
nilfs2: remove the unneeded result variable
nilfs2: delete unnecessary checks before brelse()
checkpatch: warn for non-standard fixes tag style
usr/gen_init_cpio.c: remove unnecessary -1 values from int file
ipc/msg: mitigate the lock contention with percpu counter
percpu: add percpu_counter_add_local and percpu_counter_sub_local
fs/ocfs2: fix repeated words in comments
relay: use kvcalloc to alloc page array in relay_alloc_page_array
proc: make config PROC_CHILDREN depend on PROC_FS
fs: uninline inode_maybe_inc_iversion()
...
Since commit 8782fb61cc ("mm: pagewalk: Fix race between unmap and page
walker"), walk_page_range() on kernel ranges won't work anymore,
walk_page_range_novma() must be used instead.
Note: I don't have an openrisc development setup, so this is completely
untested.
Fixes: 8782fb61cc ("mm: pagewalk: Fix race between unmap and page walker")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The objects placed at the head of vmlinux need special treatments:
- arch/$(SRCARCH)/Makefile adds them to head-y in order to place
them before other archives in the linker command line.
- arch/$(SRCARCH)/kernel/Makefile adds them to extra-y instead of
obj-y to avoid them going into built-in.a.
This commit gets rid of the latter.
Create vmlinux.a to collect all the objects that are unconditionally
linked to vmlinux. The objects listed in head-y are moved to the head
of vmlinux.a by using 'ar m'.
With this, arch/$(SRCARCH)/kernel/Makefile can consistently use obj-y
for builtin objects.
There is no *.o that is directly linked to vmlinux. Drop unneeded code
in scripts/clang-tools/gen_compile_commands.py.
$(AR) mPi needs 'T' to workaround the llvm-ar bug. The fix was suggested
by Nathan Chancellor [1].
[1]: https://lore.kernel.org/llvm/YyjjT5gQ2hGMH0ni@dev-arch.thelio-3990X/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
fatfs, autofs, squashfs, procfs, etc.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYu9BeQAKCRDdBJ7gKXxA
jp1DAP4mjCSvAwYzXklrIt+Knv3CEY5oVVdS+pWOAOGiJpldTAD9E5/0NV+VmlD9
kwS/13j38guulSlXRzDLmitbg81zAAI=
=Zfum
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"Updates to various subsystems which I help look after. lib, ocfs2,
fatfs, autofs, squashfs, procfs, etc. A relatively small amount of
material this time"
* tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
scripts/gdb: ensure the absolute path is generated on initial source
MAINTAINERS: kunit: add David Gow as a maintainer of KUnit
mailmap: add linux.dev alias for Brendan Higgins
mailmap: update Kirill's email
profile: setup_profiling_timer() is moslty not implemented
ocfs2: fix a typo in a comment
ocfs2: use the bitmap API to simplify code
ocfs2: remove some useless functions
lib/mpi: fix typo 'the the' in comment
proc: add some (hopefully) insightful comments
bdi: remove enum wb_congested_state
kernel/hung_task: fix address space of proc_dohung_task_timeout_secs
lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t()
squashfs: support reading fragments in readahead call
squashfs: implement readahead
squashfs: always build "file direct" version of page actor
Revert "squashfs: provide backing_dev_info in order to disable read-ahead"
fs/ocfs2: Fix spelling typo in comment
ia64: old_rr4 added under CONFIG_HUGETLB_PAGE
proc: fix test for "vsyscall=xonly" boot option
...
The setup_profiling_timer() is mostly un-implemented by many
architectures. In many places it isn't guarded by CONFIG_PROFILE which is
needed for it to be used. Make it a weak symbol in kernel/profile.c and
remove the 'return -EINVAL' implementations from the kenrel.
There are a couple of architectures which do return 0 from the
setup_profiling_timer() function but they don't seem to do anything else
with it. To keep the /proc compatibility for now, leave these for a
future update or removal.
On ARM, this fixes the following sparse warning:
arch/arm/kernel/smp.c:793:5: warning: symbol 'setup_profiling_timer' was not declared. Should it be static?
Link: https://lkml.kernel.org/r/20220721195509.418205-1-ben-linux@fluff.org
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ordinary user mode tasks.
In commit 40966e316f ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
The commit 343f4c49f2 ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple enough
to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code sitting
in linux-next.
Link: https://lkml.kernel.org/r/87mtfu4up3.fsf@email.froward.int.ebiederm.org
Eric W. Biederman (8):
kthread: Don't allocate kthread_struct for init and umh
fork: Pass struct kernel_clone_args into copy_thread
fork: Explicity test for idle tasks in copy_thread
fork: Generalize PF_IO_WORKER handling
init: Deal with the init process being a user mode process
fork: Explicitly set PF_KTHREAD
fork: Stop allowing kthreads to call execve
sched: Update task_tick_numa to ignore tasks without an mm
arch/alpha/kernel/process.c | 13 ++++++------
arch/arc/kernel/process.c | 13 ++++++------
arch/arm/kernel/process.c | 12 ++++++-----
arch/arm64/kernel/process.c | 12 ++++++-----
arch/csky/kernel/process.c | 15 ++++++-------
arch/h8300/kernel/process.c | 10 ++++-----
arch/hexagon/kernel/process.c | 12 ++++++-----
arch/ia64/kernel/process.c | 15 +++++++------
arch/m68k/kernel/process.c | 12 ++++++-----
arch/microblaze/kernel/process.c | 12 ++++++-----
arch/mips/kernel/process.c | 13 ++++++------
arch/nios2/kernel/process.c | 12 ++++++-----
arch/openrisc/kernel/process.c | 12 ++++++-----
arch/parisc/kernel/process.c | 18 +++++++++-------
arch/powerpc/kernel/process.c | 15 +++++++------
arch/riscv/kernel/process.c | 12 ++++++-----
arch/s390/kernel/process.c | 12 ++++++-----
arch/sh/kernel/process_32.c | 12 ++++++-----
arch/sparc/kernel/process_32.c | 12 ++++++-----
arch/sparc/kernel/process_64.c | 12 ++++++-----
arch/um/kernel/process.c | 15 +++++++------
arch/x86/include/asm/fpu/sched.h | 2 +-
arch/x86/include/asm/switch_to.h | 8 +++----
arch/x86/kernel/fpu/core.c | 4 ++--
arch/x86/kernel/process.c | 18 +++++++++-------
arch/xtensa/kernel/process.c | 17 ++++++++-------
fs/exec.c | 8 ++++---
include/linux/sched/task.h | 8 +++++--
init/initramfs.c | 2 ++
init/main.c | 2 +-
kernel/fork.c | 46 +++++++++++++++++++++++++++++++++-------
kernel/sched/fair.c | 2 +-
kernel/umh.c | 6 +++---
33 files changed, 234 insertions(+), 160 deletions(-)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=x6fy
-----END PGP SIGNATURE-----
Merge tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull kthread updates from Eric Biederman:
"This updates init and user mode helper tasks to be ordinary user mode
tasks.
Commit 40966e316f ("kthread: Ensure struct kthread is present for
all kthreads") caused init and the user mode helper threads that call
kernel_execve to have struct kthread allocated for them. This struct
kthread going away during execve in turned made a use after free of
struct kthread possible.
Here, commit 343f4c49f2 ("kthread: Don't allocate kthread_struct for
init and umh") is enough to fix the use after free and is simple
enough to be backportable.
The rest of the changes pass struct kernel_clone_args to clean things
up and cause the code to make sense.
In making init and the user mode helpers tasks purely user mode tasks
I ran into two complications. The function task_tick_numa was
detecting tasks without an mm by testing for the presence of
PF_KTHREAD. The initramfs code in populate_initrd_image was using
flush_delayed_fput to ensuere the closing of all it's file descriptors
was complete, and flush_delayed_fput does not work in a userspace
thread.
I have looked and looked and more complications and in my code review
I have not found any, and neither has anyone else with the code
sitting in linux-next"
* tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sched: Update task_tick_numa to ignore tasks without an mm
fork: Stop allowing kthreads to call execve
fork: Explicitly set PF_KTHREAD
init: Deal with the init process being a user mode process
fork: Generalize PF_IO_WORKER handling
fork: Explicity test for idle tasks in copy_thread
fork: Pass struct kernel_clone_args into copy_thread
kthread: Don't allocate kthread_struct for init and umh
