The extra-y syntax is deprecated. Instead, use always-$(KBUILD_BUILTIN),
which behaves equivalently.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
On ARMv7 / v7m machines read CTR and CLIDR registers to provide
information regarding the cache topology. Earlier machines should
describe full cache topology in the device tree.
Note, this follows the ARM64 cacheinfo support and provides only minimal
support required to bootstrap cache info. All useful properties should
be decribed in Device Tree.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
It is preferred to put drivers under drivers/ rather than under arch/.
The PMU drivers also depend on arm_pmu.c, so it's better to place them
all together.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240626-arm-pmu-3-9-icntr-v2-3-c9784b4f4065@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
- remove a misuse of kernel-doc comment
- use "Call trace:" for backtraces like other architectures
- implement copy_from_kernel_nofault_allowed() to fix a LKDTM test
- add a "cut here" line for prefetch aborts
- remove unnecessary Kconfing entry for FRAME_POINTER
- remove iwmmxy support for PJ4/PJ4B cores
- use bitfield helpers in ptrace to improve readabililty
- check if folio is reserved before flushing
-----BEGIN PGP SIGNATURE-----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=f4r2
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- remove a misuse of kernel-doc comment
- use "Call trace:" for backtraces like other architectures
- implement copy_from_kernel_nofault_allowed() to fix a LKDTM test
- add a "cut here" line for prefetch aborts
- remove unnecessary Kconfing entry for FRAME_POINTER
- remove iwmmxy support for PJ4/PJ4B cores
- use bitfield helpers in ptrace to improve readabililty
- check if folio is reserved before flushing
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9359/1: flush: check if the folio is reserved for no-mapping addresses
ARM: 9354/1: ptrace: Use bitfield helpers
ARM: 9352/1: iwmmxt: Remove support for PJ4/PJ4B cores
ARM: 9353/1: remove unneeded entry for CONFIG_FRAME_POINTER
ARM: 9351/1: fault: Add "cut here" line for prefetch aborts
ARM: 9350/1: fault: Implement copy_from_kernel_nofault_allowed()
ARM: 9349/1: unwind: Add missing "Call trace:" line
ARM: 9334/1: mm: init: remove misuse of kernel-doc comment
PJ4 is a v7 core that incorporates a iWMMXt coprocessor. However, GCC
does not support this combination (its iWMMXt configuration always
implies v5te), and so there is no v6/v7 user space that actually makes
use of this, beyond generic support for things like setjmp() that
preserve/restore the iWMMXt register file using generic LDC/STC
instructions emitted in assembler. As [0] appears to imply, this logic
is triggered for the init process at boot, and so most user threads will
have a iWMMXt register context associated with it, even though it is
never used.
At this point, it is highly unlikely that such GCC support will ever
materialize (and Clang does not implement support for iWMMXt to begin
with).
This means that advertising iWMMXt support on these cores results in
context switch overhead without any associated benefit, and so it is
better to simply ignore the iWMMXt unit on these systems. So rip out the
support. Doing so also fixes the issue reported in [0] related to UNDEF
handling of co-processor #0/#1 instructions issued from user space
running in Thumb2 mode.
The PJ4 cores are used in four platforms: Armada 370/xp, Dove (Cubox,
d2plug), MMP2 (xo-1.75) and Berlin (Google TV). Out of these, only the
first is still widely used, but that one actually doesn't have iWMMXt
but instead has only VFPV3-D16, and so it is not impacted by this
change.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218427 [0]
Fixes: 8bcba70cb5 ("ARM: entry: Disregard Thumb undef exception ...")
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Nathan reported below building error:
=====
$ curl -LSso .config https://git.alpinelinux.org/aports/plain/community/linux-edge/config-edge.armv7
$ make -skj"$(nproc)" ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- olddefconfig all
..
arm-linux-gnueabi-ld: arch/arm/kernel/machine_kexec.o: in function `arch_crash_save_vmcoreinfo':
machine_kexec.c:(.text+0x488): undefined reference to `vmcoreinfo_append_str'
====
On architecutres, like arm, s390, ppc, sh, function
arch_crash_save_vmcoreinfo() is located in machine_kexec.c and it can
only be compiled in when CONFIG_KEXEC_CORE=y.
That's not right because arch_crash_save_vmcoreinfo() is used to export
arch specific vmcoreinfo. CONFIG_VMCORE_INFO is supposed to control its
compiling in. However, CONFIG_VMVCORE_INFO could be independent of
CONFIG_KEXEC_CORE, e.g CONFIG_PROC_KCORE=y will select CONFIG_VMVCORE_INFO.
Or CONFIG_KEXEC/CONFIG_KEXEC_FILE is set while CONFIG_CRASH_DUMP is
not set, it will report linking error.
So, on arm, s390, ppc and sh, move arch_crash_save_vmcoreinfo out to
a new file vmcore_info.c. Let CONFIG_VMCORE_INFO decide if compiling in
arch_crash_save_vmcoreinfo().
[akpm@linux-foundation.org: remove stray newlines at eof]
Link: https://lkml.kernel.org/r/20240129135033.157195-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20240126045551.GA126645@dev-arch.thelio-3990X/T/#u
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ignat Korchagin complained that a potential config regression was
introduced by commit 89cde45591 ("kexec: consolidate kexec and crash
options into kernel/Kconfig.kexec"). Before the commit, CONFIG_CRASH_DUMP
has no dependency on CONFIG_KEXEC. After the commit, CRASH_DUMP selects
KEXEC. That enforces system to have CONFIG_KEXEC=y as long as
CONFIG_CRASH_DUMP=Y which people may not want.
In Ignat's case, he sets CONFIG_CRASH_DUMP=y, CONFIG_KEXEC_FILE=y and
CONFIG_KEXEC=n because kexec_load interface could have security issue if
kernel/initrd has no chance to be signed and verified.
CRASH_DUMP has select of KEXEC because Eric, author of above commit, met a
LKP report of build failure when posting patch of earlier version. Please
see below link to get detail of the LKP report:
https://lore.kernel.org/all/3e8eecd1-a277-2cfb-690e-5de2eb7b988e@oracle.com/T/#u
In fact, that LKP report is triggered because arm's <asm/kexec.h> is
wrapped in CONFIG_KEXEC ifdeffery scope. That is wrong. CONFIG_KEXEC
controls the enabling/disabling of kexec_load interface, but not kexec
feature. Removing the wrongly added CONFIG_KEXEC ifdeffery scope in
<asm/kexec.h> of arm allows us to drop the select KEXEC for CRASH_DUMP.
Meanwhile, change arch/arm/kernel/Makefile to let machine_kexec.o
relocate_kernel.o depend on KEXEC_CORE.
Link: https://lkml.kernel.org/r/20231128054457.659452-1-bhe@redhat.com
Fixes: 89cde45591 ("kexec: consolidate kexec and crash options into kernel/Kconfig.kexec")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Ignat Korchagin <ignat@cloudflare.com>
Tested-by: Ignat Korchagin <ignat@cloudflare.com> [compile-time only]
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Tested-by: Eric DeVolder <eric_devolder@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- update unwinder to cope with module PLTs
- enable UBSAN on ARM
- improve kernel fault message
- update UEFI runtime page tables dump
- avoid clang's __aeabi_uldivmod generated in NWFPE code
- disable FIQs on CPU shutdown paths
- update XOR register usage
- a number of build updates (using .arch, thread pointer,
removal of lazy evaluation in Makefile)
- conversion of stacktrace code to stackwalk
- findbit assembly updates
- hwcap feature updates for ARMv8 CPUs
- instruction dump updates for big-endian platforms
- support for function error injection
-----BEGIN PGP SIGNATURE-----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=1spR
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- update unwinder to cope with module PLTs
- enable UBSAN on ARM
- improve kernel fault message
- update UEFI runtime page tables dump
- avoid clang's __aeabi_uldivmod generated in NWFPE code
- disable FIQs on CPU shutdown paths
- update XOR register usage
- a number of build updates (using .arch, thread pointer, removal of
lazy evaluation in Makefile)
- conversion of stacktrace code to stackwalk
- findbit assembly updates
- hwcap feature updates for ARMv8 CPUs
- instruction dump updates for big-endian platforms
- support for function error injection
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (31 commits)
ARM: 9279/1: support function error injection
ARM: 9277/1: Make the dumped instructions are consistent with the disassembled ones
ARM: 9276/1: Refactor dump_instr()
ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA
ARM: 9274/1: Add hwcap for Speculative Store Bypassing Safe
ARM: 9273/1: Add hwcap for Speculation Barrier(SB)
ARM: 9272/1: vfp: Add hwcap for FEAT_AA32I8MM
ARM: 9271/1: vfp: Add hwcap for FEAT_AA32BF16
ARM: 9270/1: vfp: Add hwcap for FEAT_FHM
ARM: 9269/1: vfp: Add hwcap for FEAT_DotProd
ARM: 9268/1: vfp: Add hwcap FPHP and ASIMDHP for FEAT_FP16
ARM: 9267/1: Define Armv8 registers in AArch32 state
ARM: findbit: add unwinder information
ARM: findbit: operate by words
ARM: findbit: convert to macros
ARM: findbit: provide more efficient ARMv7 implementation
ARM: findbit: document ARMv5 bit offset calculation
ARM: 9259/1: stacktrace: Convert stacktrace to generic ARCH_STACKWALK
ARM: 9258/1: stacktrace: Make stack walk callback consistent with generic code
ARM: 9265/1: pass -march= only to compiler
...
Similar to commit a6c30873ee ("ARM: 8989/1: use .fpu assembler
directives instead of assembler arguments").
GCC and GNU binutils support setting the "sub arch" via -march=,
-Wa,-march, target function attribute, and .arch assembler directive.
Clang was missing support for -Wa,-march=, but this was implemented in
clang-13.
The behavior of both GCC and Clang is to
prefer -Wa,-march= over -march= for assembler and assembler-with-cpp
sources, but Clang will warn about the -march= being unused.
clang: warning: argument unused during compilation: '-march=armv6k'
[-Wunused-command-line-argument]
Since most assembler is non-conditionally assembled with one sub arch
(modulo arch/arm/delay-loop.S which conditionally is assembled as armv4
based on CONFIG_ARCH_RPC, and arch/arm/mach-at91/pm-suspend.S which is
conditionally assembled as armv7-a based on CONFIG_CPU_V7), prefer the
.arch assembler directive.
Add a few more instances found in compile testing as found by Arnd and
Nathan.
Link: 1d51c699b9
Link: https://bugs.llvm.org/show_bug.cgi?id=48894
Link: https://github.com/ClangBuiltLinux/linux/issues/1195
Link: https://github.com/ClangBuiltLinux/linux/issues/1315
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
- Remove potentially incomplete targets when Kbuid is interrupted by
SIGINT etc. in case GNU Make may miss to do that when stderr is piped
to another program.
- Rewrite the single target build so it works more correctly.
- Fix rpm-pkg builds with V=1.
- List top-level subdirectories in ./Kbuild.
- Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in kallsyms.
- Avoid two different modules in lib/zstd/ having shared code, which
potentially causes building the common code as build-in and modular
back-and-forth.
- Unify two modpost invocations to optimize the build process.
- Remove head-y syntax in favor of linker scripts for placing particular
sections in the head of vmlinux.
- Bump the minimal GNU Make version to 3.82.
- Clean up misc Makefiles and scripts.
-----BEGIN PGP SIGNATURE-----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=DHiN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove potentially incomplete targets when Kbuid is interrupted by
SIGINT etc in case GNU Make may miss to do that when stderr is piped
to another program.
- Rewrite the single target build so it works more correctly.
- Fix rpm-pkg builds with V=1.
- List top-level subdirectories in ./Kbuild.
- Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in
kallsyms.
- Avoid two different modules in lib/zstd/ having shared code, which
potentially causes building the common code as build-in and modular
back-and-forth.
- Unify two modpost invocations to optimize the build process.
- Remove head-y syntax in favor of linker scripts for placing
particular sections in the head of vmlinux.
- Bump the minimal GNU Make version to 3.82.
- Clean up misc Makefiles and scripts.
* tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
docs: bump minimal GNU Make version to 3.82
ia64: simplify esi object addition in Makefile
Revert "kbuild: Check if linker supports the -X option"
kbuild: rebuild .vmlinux.export.o when its prerequisite is updated
kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o
zstd: Fixing mixed module-builtin objects
kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols
kallsyms: take the input file instead of reading stdin
kallsyms: drop duplicated ignore patterns from kallsyms.c
kbuild: reuse mksysmap output for kallsyms
mksysmap: update comment about __crc_*
kbuild: remove head-y syntax
kbuild: use obj-y instead extra-y for objects placed at the head
kbuild: hide error checker logs for V=1 builds
kbuild: re-run modpost when it is updated
kbuild: unify two modpost invocations
kbuild: move vmlinux.o rule to the top Makefile
kbuild: move .vmlinux.objs rule to Makefile.modpost
kbuild: list sub-directories in ./Kbuild
Makefile.compiler: replace cc-ifversion with compiler-specific macros
...
The objects placed at the head of vmlinux need special treatments:
- arch/$(SRCARCH)/Makefile adds them to head-y in order to place
them before other archives in the linker command line.
- arch/$(SRCARCH)/kernel/Makefile adds them to extra-y instead of
obj-y to avoid them going into built-in.a.
This commit gets rid of the latter.
Create vmlinux.a to collect all the objects that are unconditionally
linked to vmlinux. The objects listed in head-y are moved to the head
of vmlinux.a by using 'ar m'.
With this, arch/$(SRCARCH)/kernel/Makefile can consistently use obj-y
for builtin objects.
There is no *.o that is directly linked to vmlinux. Drop unneeded code
in scripts/clang-tools/gen_compile_commands.py.
$(AR) mPi needs 'T' to workaround the llvm-ar bug. The fix was suggested
by Nathan Chancellor [1].
[1]: https://lore.kernel.org/llvm/YyjjT5gQ2hGMH0ni@dev-arch.thelio-3990X/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
The dma-isa.c was shared between footbridge and shark a long time ago,
but as shark was removed, it can be made footbridge specific again.
The fb_dma bits in turn are not used at all and can be removed.
All the ISA related files are now built into the platform regardless
of CONFIG_ISA, as they just refer to on-chip devices rather than actual
ISA cards.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Updates for IRQ stacks and virtually mapped stack support for ARM from
the following pull requests, etc:
1) ARM: support for IRQ and vmap'ed stacks
This PR covers all the work related to implementing IRQ stacks and
vmap'ed stacks for all 32-bit ARM systems that are currently supported
by the Linux kernel, including RiscPC and Footbridge. It has been
submitted for review in three different waves:
- IRQ stacks support for v7 SMP systems [0],
- vmap'ed stacks support for v7 SMP systems[1],
- extending support for both IRQ stacks and vmap'ed stacks for all
remaining configurations, including v6/v7 SMP multiplatform kernels
and uniprocessor configurations including v7-M [2]
[0] https://lore.kernel.org/linux-arm-kernel/20211115084732.3704393-1-ardb@kernel.org/
[1] https://lore.kernel.org/linux-arm-kernel/20211122092816.2865873-1-ardb@kernel.org/
[2] https://lore.kernel.org/linux-arm-kernel/20211206164659.1495084-1-ardb@kernel.org/
2) ARM: support for IRQ and vmap'ed stacks [v6]
This tag covers the changes between the version of vmap'ed + IRQ stacks
support pulled into rmk/devel-stable [0] (which was dropped from v5.17
due to issues discovered too late in the cycle), and my v5 proposed for
the v5.18 cycle [1].
[0] git://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux.git arm-irq-and-vmap-stacks-for-rmk
[1] https://lore.kernel.org/linux-arm-kernel/20220124174744.1054712-1-ardb@kernel.org/
3) ARM: ftrace fixes and cleanups
Make all flavors of ftrace available on all builds, regardless of ISA
choice, unwinder choice or compiler:
- use ADD not POP where possible
- fix a couple of Thumb2 related issues
- enable HAVE_FUNCTION_GRAPH_FP_TEST for robustness
- enable the graph tracer with the EABI unwinder
- avoid clobbering frame pointer registers to make Clang happy
Link: https://lore.kernel.org/linux-arm-kernel/20220203082204.1176734-1-ardb@kernel.org/
4) Fixes for the above.
-----BEGIN PGP SIGNATURE-----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=AVCL
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
"Updates for IRQ stacks and virtually mapped stack support, and ftrace:
- Support for IRQ and vmap'ed stacks
This covers all the work related to implementing IRQ stacks and
vmap'ed stacks for all 32-bit ARM systems that are currently
supported by the Linux kernel, including RiscPC and Footbridge. It
has been submitted for review in four different waves:
- IRQ stacks support for v7 SMP systems [0]
- vmap'ed stacks support for v7 SMP systems[1]
- extending support for both IRQ stacks and vmap'ed stacks for all
remaining configurations, including v6/v7 SMP multiplatform
kernels and uniprocessor configurations including v7-M [2]
- fixes and updates in [3]
- ftrace fixes and cleanups
Make all flavors of ftrace available on all builds, regardless of
ISA choice, unwinder choice or compiler [4]:
- use ADD not POP where possible
- fix a couple of Thumb2 related issues
- enable HAVE_FUNCTION_GRAPH_FP_TEST for robustness
- enable the graph tracer with the EABI unwinder
- avoid clobbering frame pointer registers to make Clang happy
- Fixes for the above"
[0] https://lore.kernel.org/linux-arm-kernel/20211115084732.3704393-1-ardb@kernel.org/
[1] https://lore.kernel.org/linux-arm-kernel/20211122092816.2865873-1-ardb@kernel.org/
[2] https://lore.kernel.org/linux-arm-kernel/20211206164659.1495084-1-ardb@kernel.org/
[3] https://lore.kernel.org/linux-arm-kernel/20220124174744.1054712-1-ardb@kernel.org/
[4] https://lore.kernel.org/linux-arm-kernel/20220203082204.1176734-1-ardb@kernel.org/
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (62 commits)
ARM: fix building NOMMU ARMv4/v5 kernels
ARM: unwind: only permit stack switch when unwinding call_with_stack()
ARM: Revert "unwind: dump exception stack from calling frame"
ARM: entry: fix unwinder problems caused by IRQ stacks
ARM: unwind: set frame.pc correctly for current-thread unwinding
ARM: 9184/1: return_address: disable again for CONFIG_ARM_UNWIND=y
ARM: 9183/1: unwind: avoid spurious warnings on bogus code addresses
Revert "ARM: 9144/1: forbid ftrace with clang and thumb2_kernel"
ARM: mach-bcm: disable ftrace in SMC invocation routines
ARM: cacheflush: avoid clobbering the frame pointer
ARM: kprobes: treat R7 as the frame pointer register in Thumb2 builds
ARM: ftrace: enable the graph tracer with the EABI unwinder
ARM: unwind: track location of LR value in stack frame
ARM: ftrace: enable HAVE_FUNCTION_GRAPH_FP_TEST
ARM: ftrace: avoid unnecessary literal loads
ARM: ftrace: avoid redundant loads or clobbering IP
ARM: ftrace: use trampolines to keep .init.text in branching range
ARM: ftrace: use ADD not POP to counter PUSH at entry
ARM: ftrace: ensure that ADR takes the Thumb bit into account
ARM: make get_current() and __my_cpu_offset() __always_inline
...
Commit 41918ec82e ("ARM: ftrace: enable the graph tracer with the EABI
unwinder") removed the dummy version of return_address() that was
provided for the CONFIG_ARM_UNWIND=y case, on the assumption that the
removal of the kernel_text_address() call from unwind_frame() in the
preceding patch made it safe to do so.
However, this turns out not to be the case: Corentin reports warnings
about suspicious RCU usage and other strange behavior that seems to
originate in the stack unwinding that occurs in return_address().
Given that the function graph tracer (which is what these changes were
enabling for CONFIG_ARM_UNWIND=y builds) does not appear to care about
this distinction, let's revert return_address() to the old state.
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Fixes: 41918ec82e ("ARM: ftrace: enable the graph tracer with the EABI unwinder")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
As per other architectures, add support for reporting the Spectre
vulnerability status via sysfs CPU.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Enable the function graph tracer in combination with the EABI unwinder,
so that Thumb2 builds or Clang ARM builds can make use of it.
This involves using the unwinder to locate the return address of an
instrumented function on the stack, so that it can be overridden and
made to refer to the ftrace handling routines that need to be called at
function return.
Given that for these builds, it is not guaranteed that the value of the
link register is stored on the stack, fall back to the stack slot that
will be used by the ftrace exit code to restore LR in the instrumented
function's execution context.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The ftrace graph tracer needs to override the return address of an
instrumented function, in order to install a hook that gets invoked when
the function returns again.
Currently, we only support this when building for ARM using GCC with
frame pointers, as in this case, it is guaranteed that the function will
reload LR from [FP, #-4] in all cases, and we can simply pass that
address to the ftrace code.
In order to support this for configurations that rely on the EABI
unwinder, such as Thumb2 builds, make the unwinder keep track of the
address from which LR was unwound, permitting ftrace to make use of this
in a subsequent patch.
Drop the call to is_kernel_text_address(), which is problematic in terms
of ftrace recursion, given that it may be instrumented itself. The call
is redundant anyway, as no unwind directives will be found unless the PC
points to memory that is known to contain executable code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
- Rework phys/virt translation
- Add KASan support
- Move DT out of linear map region
- Use more PC-relative addressing in assembly
- Remove FP emulation handling while in kernel mode
- Link with '-z norelro'
- remove old check for GCC <= 4.2 in ARM unwinder code
- disable big endian if using clang's linker
-----BEGIN PGP SIGNATURE-----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=fZGX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux
Pull ARM updates from Russell King:
- Rework phys/virt translation
- Add KASan support
- Move DT out of linear map region
- Use more PC-relative addressing in assembly
- Remove FP emulation handling while in kernel mode
- Link with '-z norelro'
- remove old check for GCC <= 4.2 in ARM unwinder code
- disable big endian if using clang's linker
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (46 commits)
ARM: 9027/1: head.S: explicitly map DT even if it lives in the first physical section
ARM: 9038/1: Link with '-z norelro'
ARM: 9037/1: uncompress: Add OF_DT_MAGIC macro
ARM: 9036/1: uncompress: Fix dbgadtb size parameter name
ARM: 9035/1: uncompress: Add be32tocpu macro
ARM: 9033/1: arm/smp: Drop the macro S(x,s)
ARM: 9032/1: arm/mm: Convert PUD level pgtable helper macros into functions
ARM: 9031/1: hyp-stub: remove unused .L__boot_cpu_mode_offset symbol
ARM: 9044/1: vfp: use undef hook for VFP support detection
ARM: 9034/1: __div64_32(): straighten up inline asm constraints
ARM: 9030/1: entry: omit FP emulation for UND exceptions taken in kernel mode
ARM: 9029/1: Make iwmmxt.S support Clang's integrated assembler
ARM: 9028/1: disable KASAN in call stack capturing routines
ARM: 9026/1: unwind: remove old check for GCC <= 4.2
ARM: 9025/1: Kconfig: CPU_BIG_ENDIAN depends on !LD_IS_LLD
ARM: 9024/1: Drop useless cast of "u64" to "long long"
ARM: 9023/1: Spelling s/mmeory/memory/
ARM: 9022/1: Change arch/arm/lib/mem*.S to use WEAK instead of .weak
ARM: kvm: replace open coded VA->PA calculations with adr_l call
ARM: head.S: use PC relative insn sequence to calculate PHYS_OFFSET
...
KASAN uses the routines in stacktrace.c to capture the call stack each
time memory gets allocated or freed. Some of these routines are also
used to log CPU and memory context when exceptions are taken, and so
in some cases, memory accesses may be made that are not strictly in
line with the KASAN constraints, and may therefore trigger false KASAN
positives.
So follow the example set by other architectures, and simply disable
KASAN instrumentation for these routines.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Russell said that he is no longer using this machine, and it seems that
nobody else has in a long time, so it's time to say goodbye to it.
As this is the last platform using CONFIG_ARCH_USES_GETTIMEOFFSET,
there are some follow-up patches to remove that as well.
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Move the phys2virt patching code into a separate .S file before doing
some work on it.
Suggested-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Instead of flipping text protection, use the patch_text infrastructure
that uses a fixmap alias where required.
This removes the last user of set_all_modules_text_*().
Tested-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: ard.biesheuvel@linaro.org
Cc: james.morse@arm.com
Cc: rabin@rab.in
Link: https://lkml.kernel.org/r/20191113092636.GG4131@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The system currently warns if the config conditions for
building return_address in arch/arm/kernel/return_address.c
are not met, leaving just an EXPORT_SYMBOL_GPL(return_address)
of a function defined to be 'static linline'.
This is a result of aeea3592a1 ("ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h").
Since we're not going to build anything other than an exported
symbol for something that is already being defined to be an
inline-able return of NULL, just avoid building the code to
remove the following warning:
Fixes: aeea3592a1 ("ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Prepare the processor bug infrastructure so that it can be expanded to
check for per-processor bugs.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Pull ARM updates from Russell King:
- add support for ELF fdpic binaries on both MMU and noMMU platforms
- linker script cleanups
- support for compressed .data section for XIP images
- discard memblock arrays when possible
- various cleanups
- atomic DMA pool updates
- better diagnostics of missing/corrupt device tree
- export information to allow userspace kexec tool to place images more
inteligently, so that the device tree isn't overwritten by the
booting kernel
- make early_printk more efficient on semihosted systems
- noMMU cleanups
- SA1111 PCMCIA update in preparation for further cleanups
* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (38 commits)
ARM: 8719/1: NOMMU: work around maybe-uninitialized warning
ARM: 8717/2: debug printch/printascii: translate '\n' to "\r\n" not "\n\r"
ARM: 8713/1: NOMMU: Support MPU in XIP configuration
ARM: 8712/1: NOMMU: Use more MPU regions to cover memory
ARM: 8711/1: V7M: Add support for MPU to M-class
ARM: 8710/1: Kconfig: Kill CONFIG_VECTORS_BASE
ARM: 8709/1: NOMMU: Disallow MPU for XIP
ARM: 8708/1: NOMMU: Rework MPU to be mostly done in C
ARM: 8707/1: NOMMU: Update MPU accessors to use cp15 helpers
ARM: 8706/1: NOMMU: Move out MPU setup in separate module
ARM: 8702/1: head-common.S: Clear lr before jumping to start_kernel()
ARM: 8705/1: early_printk: use printascii() rather than printch()
ARM: 8703/1: debug.S: move hexbuf to a writable section
ARM: add additional table to compressed kernel
ARM: decompressor: fix BSS size calculation
pcmcia: sa1111: remove special sa1111 mmio accessors
pcmcia: sa1111: use sa1111_get_irq() to obtain IRQ resources
ARM: better diagnostics with missing/corrupt dtb
ARM: 8699/1: dma-mapping: Remove init_dma_coherent_pool_size()
ARM: 8698/1: dma-mapping: Mark atomic_pool as __ro_after_init
..
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .data segment stored in ROM is only copied to RAM once at boot time
and never referenced afterwards. This is arguably a suboptimal usage of
ROM resources.
This patch allows for compressing the .data segment before storing it
into ROM and decompressing it to RAM rather than simply copying it,
saving on precious ROM space.
Because global data is not available yet (obviously) we must allocate
decompressor workspace memory on the stack. The .bss area is used as a
stack area for that purpose before it is cleared. The required stack
frame is 9568 bytes for __inflate_kernel_data() alone, so make sure
the .bss is large enough to cope with that plus extra room for called
functions or fail the build.
Those numbers were picked arbitrarily based on the above 9568 byte
stack frame:
10240 (2.5 * PAGE_SIZE): used to override -Wframe-larger-than whose
default value is 1024.
12288 (3 * PAGE_SIZE): minimum .bss size to contain the stack.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Chris Brandt <Chris.Brandt@renesas.com>
This reverts commit 4dd1837d75.
Moving the exports for assembly code into the assembly files breaks
KSYM trimming, but also breaks modversions.
While fixing the KSYM trimming is trivial, fixing modversions brings
us to a technically worse position that we had prior to the above
change:
- We end up with the prototype definitions divorsed from everything
else, which means that adding or removing assembly level ksyms
become more fragile:
* if adding a new assembly ksyms export, a missed prototype in
asm-prototypes.h results in a successful build if no module in
the selected configuration makes use of the symbol.
* when removing a ksyms export, asm-prototypes.h will get forgotten,
with armksyms.c, you'll get a build error if you forget to touch
the file.
- We end up with the same amount of include files and prototypes,
they're just in a header file instead of a .c file with their
exports.
As for lines of code, we don't get much of a size reduction:
(original commit)
47 files changed, 131 insertions(+), 208 deletions(-)
(fix for ksyms trimming)
7 files changed, 18 insertions(+), 5 deletions(-)
(two fixes for modversions)
1 file changed, 34 insertions(+)
3 files changed, 7 insertions(+), 2 deletions(-)
which results in a net total of only 25 lines deleted.
As there does not seem to be much benefit from this change of approach,
revert the change.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
ARMv6 CPUs do not have virtualisation extensions, but hyp-stub.S is
still included into the image to keep it generic. In order to use ARMv7
instructions during HYP initialisation, add -march=armv7-a flag to
hyp-stub's build.
On an ARMv6 CPU, __hyp_stub_install returns as soon as it detects that
the mode isn't HYP, so we will never reach those instructions.
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
- Stolen ticks and PV wallclock support for arm/arm64.
- Add grant copy ioctl to gntdev device.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWk5IUAAoJEFxbo/MsZsTRLxwH/1BDcrbQDRc5hxUOG9JEYSUt
H/lMjvZRShPkzweijdNon95ywAXhcSbkS9IV2Mp0+CZV7VyeymW7QIW/g4+G6iRg
+LnoV77PAhPv/cmsr1pENXqRCclvemlxQOf7UyWLezuKhB71LC+oNaEnpk/tPIZS
et/qef+m/SgSP5R91nO0Esv2KfP7za0UrgJf3Ee4GzjSeDkya0Hko06Cy3yc1/RT
082kHpQ1/KFcHHh2qhdCQwyzhq/cwFkuDA6ksKYJoxC6YAVC2mvvkuIOZYbloHDL
c/dzuP9qjjxOZ7Gblv2cmg+RE4UqRfBhxmMycxSCcwW/Mt5LaftCpAxpBQKq2/8=
=6F/q
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.5-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from David Vrabel:
"Xen features and fixes for 4.5-rc0:
- Stolen ticks and PV wallclock support for arm/arm64
- Add grant copy ioctl to gntdev device"
* tag 'for-linus-4.5-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/gntdev: add ioctl for grant copy
x86/xen: don't reset vcpu_info on a cancelled suspend
xen/gntdev: constify mmu_notifier_ops structures
xen/grant-table: constify gnttab_ops structure
xen/time: use READ_ONCE
xen/x86: convert remaining timespec to timespec64 in xen_pvclock_gtod_notify
xen/x86: support XENPF_settime64
xen/arm: set the system time in Xen via the XENPF_settime64 hypercall
xen/arm: introduce xen_read_wallclock
arm: extend pvclock_wall_clock with sec_hi
xen: introduce XENPF_settime64
xen/arm: introduce HYPERVISOR_platform_op on arm and arm64
xen: rename dom0_op to platform_op
xen/arm: account for stolen ticks
arm64: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops
arm: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops
missing include asm/paravirt.h in cputime.c
xen: move xen_setup_runstate_info and get_runstate_snapshot to drivers/xen/time.c
Switch to use a generic interface for issuing SMC/HVC based on ARM SMC
Calling Convention. Removes now the now unused psci-call.S.
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Adds implementation for arm-smccc and enables CONFIG_HAVE_SMCCC for
architectures that may support arm-smccc. It's the responsibility of the
caller to know if the SMC instruction is supported by the platform.
Reviewed-by: Lars Persson <lars.persson@axis.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The PJ4 inline asm sequence to write to cp15 cannot be built in Thumb-2
mode, due to the way it performs arithmetic on the program counter, so it
is built in ARM mode instead. However, building C files in ARM mode under
CONFIG_THUMB2_KERNEL is problematic, since the instrumentation performed
by subsystems like ftrace does not expect having to deal with interworking
branches.
Since the sequence in question is simply a poor man's ISB instruction,
let's use a straight 'isb' instead when building in Thumb2 mode. Thumb2
implies V7, so 'isb' should always be supported in that case.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Introduce CONFIG_PARAVIRT and PARAVIRT_TIME_ACCOUNTING on ARM.
The only paravirt interface supported is pv_time_ops.steal_clock, so no
runtime pvops patching needed.
This allows us to make use of steal_account_process_tick for stolen
ticks accounting.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Christopher Covington <cov@codeaurora.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Russell King <linux@arm.linux.org.uk>
This adds support to the kernel proper for booting via UEFI. It shares
most of the code with arm64, so this patch mostly just wires it up for
use with ARM.
Note that this does not include the EFI stub, it is added in a subsequent
patch.
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Now that the common PSCI client code has been factored out to
drivers/firmware, and made safe for 32-bit use, move the 32-bit ARM code
over to it. This results in a moderate reduction of duplicated lines,
and will prevent further duplication as the PSCI client code is updated
for PSCI 1.0 and beyond.
The two legacy platform users of the PSCI invocation code are updated to
account for interface changes. In both cases the power state parameter
(which is constant) is now generated using macros, so that the
pack/unpack logic can be killed in preparation for PSCI 1.0 power state
changes.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ashwin Chaugule <ashwin.chaugule@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
To enable sharing of the arm_pmu code with arm64, this patch factors it
out to drivers/perf/. A new drivers/perf directory is added for
performance monitor drivers to live under.
MAINTAINERS is updated accordingly. Files added previously without a
corresponsing MAINTAINERS update (perf_regs.c, perf_callchain.c, and
perf_event.h) are also added.
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[will: augmented Kconfig help slightly]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that the arm_pmu framework is only used for CPU PMUs, there's no
reason to keep the pseudo-generic and CPU-specific framework portions
separate.
This patch folds the two into perf_event.c.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[will: fixed up irq cfg to match upstream]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that the core arm perf code maintains no global state and all
microarchitecture-specific PMU data can be fed in through the shared
probe function, it's possible to use it as a library and get rid of the
C file includes we have currently.
This patch factors out the ARMv7-specific portions out into the ARMv7
driver. For the moment this is always built if perf event support is
enabled, but the preprocessor guards will leave behind an empty file.
Now that perf_event_cpu.c contains no microarchitecture-specific data,
the associated probing code is removed, completing its relegation to a
library file. The vestigal "arm-pmu" platform device ID is removed in
this patch, as it has been unused since platform files were updated to
specify a more specific PMU variant.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that the core arm perf code maintains no global state and all
microarchitecture-specific PMU data can be fed in through the shared
probe function, it's possible to use it as a library and get rid of the
C file includes we have currently.
This patch factors out the ARMv6-specific portions out into the ARMv6
driver. For the moment this is always built if perf event support is
enabled, but the preprocessor guards will leave behind an empty file.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that the core arm perf code maintains no global state and all
microarchitecture-specific PMU data can be fed in through the shared
probe function, it's possible to use it as a library and get rid of the
C file includes we have currently.
This patch factors out the xscale-specific portions out into the xscale
driver. For the moment this is always built if perf event support is
enabled, but the preprocessor guards will leave behind an empty file.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Loading modules far away from the kernel in memory is problematic
because the 'bl' instruction only has limited reach, and modules are not
built with PLTs. Instead of using the -mlong-calls option (which affects
all compiler emitted bl instructions, but not the ones in assembler),
this patch allocates some additional space at module load time, and
populates it with PLT like veneers when encountering relocations that
are out of range.
This should work with all relocations against symbols exported by the
kernel, including those resulting from GCC generated implicit function
calls for ftrace etc.
The module memory size increases by about 5% on average, regardless of
whether any PLT entries were actually needed. However, due to the page
based rounding that occurs when allocating module memory, the average
memory footprint increase is negligible.
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Pull exec domain removal from Richard Weinberger:
"This series removes execution domain support from Linux.
The idea behind exec domains was to support different ABIs. The
feature was never complete nor stable. Let's rip it out and make the
kernel signal handling code less complicated"
* 'exec_domain_rip_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc: (27 commits)
arm64: Removed unused variable
sparc: Fix execution domain removal
Remove rest of exec domains.
arch: Remove exec_domain from remaining archs
arc: Remove signal translation and exec_domain
xtensa: Remove signal translation and exec_domain
xtensa: Autogenerate offsets in struct thread_info
x86: Remove signal translation and exec_domain
unicore32: Remove signal translation and exec_domain
um: Remove signal translation and exec_domain
tile: Remove signal translation and exec_domain
sparc: Remove signal translation and exec_domain
sh: Remove signal translation and exec_domain
s390: Remove signal translation and exec_domain
mn10300: Remove signal translation and exec_domain
microblaze: Remove signal translation and exec_domain
m68k: Remove signal translation and exec_domain
m32r: Remove signal translation and exec_domain
m32r: Autogenerate offsets in struct thread_info
frv: Remove signal translation and exec_domain
...
