Using a generic name common over different platforms and matching the
recent atmel rng binding now.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Suggested-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20240917072710.125435-3-ada@thorsis.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add the atmel,usart-mode property to the UART nodes. This ensures
compliance with the atmel,at91-usart.yaml schema and resolves the errors
below:
serial@200: $nodename:0: 'serial@200' does not match
'^spi(@.*|-([0-9]|[1-9][0-9]+))?$'
serial@200: atmel,use-dma-rx: False schema does not allow True
serial@200: atmel,use-dma-tx: False schema does not allow True
serial@200: atmel,fifo-size: False schema does not allow [[16]]
These errors indicate that the property
atmel,usart-mode = <AT91_USART_MODE_SERIAL> is missing for
UART nodes 0, 1, 2, 3, 4, 6, 7, 8, 9, 10, 11, and 12.
Fixes: 99c8083358 ("ARM: dts: at91: sam9x60: Add missing flexcom definitions")
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20240912093307.40488-1-andrei.simion@microchip.com
[claudiu.beznea: move the atmel,usart-mode close to vendor specific
properties to cope with DTS coding style]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The RTC and RTT peripherals use the timing domain slow clock (TD_SLCK),
sourced from the 32.768 kHz crystal oscillator or slow rc oscillator.
The previously used Monitoring domain slow clock (MD_SLCK) is sourced
from an internal RC oscillator which is most probably not precise enough
for real time clock purposes.
Fixes: 1e5f532c27 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes: 5f6b33f463 ("ARM: dts: sam9x60: add rtt")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/r/20240821055136.6858-1-ada@thorsis.com
[claudiu.beznea: removed () around the last commit description paragraph,
removed " in front of "timing domain slow clock", described that
TD_SLCK can also be sourced from slow rc oscillator]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The driver data specific to each pinctrl GPIO bank compatible nodes are not
the same and declaring additional compatible string as fallback has no
specific purpose, hence, removing the "atmel,at91sam9x5-gpio" compatible from
sam9x60 SoC DT.
Note: The at91 pinctrl driver uses "atmel,at91rm9200-gpio" compatible string
to find the number of active GPIO banks and identify the pinmux nodes.It
should used as a constant across all DT for GPIO node banks that uses PIO3
based pinctrl driver
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240814061315.112564-4-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The driver data specific to each pinctrl GPIO bank compatible nodes are not
the same and declaring additional compatible string as fallback has no
specific purpose, hence, removing the additional compatible string from the
pinctrl nodes in DT to comply with atmel,at91-pinctrl.txt documentation.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240814061315.112564-3-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The pinctrl subnodes that define the pin configuration of other devices
under PIO3 pinmux controller are not simple memory mapped nodes.Ergo,
change simple-bus to simple-mfd.
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240814061315.112564-2-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
These properties are common for all i2c subnodes. Allows to add i2c device
nodes (like an rtc for example) in other .dts files including
sam9x60.dtsi without requiring to repeat these properties for each i2c
device again and again.
Found on a custom board after adding this in .dts:
&flx5 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
status = "okay";
i2c5: i2c@600 {
pinctrl-0 = <&pinctrl_flx5_default>;
status = "okay";
pcf8523: rtc@68 {
compatible = "nxp,pcf8523";
reg = <0x68>;
};
};
};
… which created a warning like this:
[…]:236.4-17: Warning (reg_format): /ahb/apb/flexcom@f0004000/i2c@600/rtc@68:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
[…]: Warning (pci_device_reg): Failed prerequisite 'reg_format'
[…]: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
[…]: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
[…]/linux-6.6.25/arch/arm/boot/dts/microchip/sam9x60.dtsi:283.19-299.7: Warning (i2c_bus_bridge): /ahb/apb/flexcom@f0004000/i2c@600: incorrect #address-cells for I2C bus also defined at […]:228.16-238.4
[…]/linux-6.6.25/arch/arm/boot/dts/microchip/sam9x60.dtsi:283.19-299.7: Warning (i2c_bus_bridge): /ahb/apb/flexcom@f0004000/i2c@600: incorrect #size-cells for I2C bus also defined at […]:228.16-238.4
[…]: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
[…]: Warning (i2c_bus_reg): Failed prerequisite 'i2c_bus_bridge'
[…]: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
[…]:234.19-237.5: Warning (avoid_default_addr_size): /ahb/apb/flexcom@f0004000/i2c@600/rtc@68: Relying on default #address-cells value
[…]:234.19-237.5: Warning (avoid_default_addr_size): /ahb/apb/flexcom@f0004000/i2c@600/rtc@68: Relying on default #size-cells value
[…]: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
[…]: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'
This probably should have been done with commit 84f23f3284 ("ARM: dts:
at91: sam9x60: move flexcom definitions") already, where those
address-cells and size-cells properties were left in the board .dts
files instead of moving them to the dtsi.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20240528153109.439407-1-ada@thorsis.com
[claudiu.beznea: adjusted commit message as the properties are not
required anymore]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Align dmas to the opening '<' to comply with the dts coding style,
indentation section, point 3: "For arrays spanning across lines, it is
preferred to align the continued entries with opening < from the first
line."
Link: https://lore.kernel.org/r/20240218151353.3612621-3-claudiu.beznea@tuxon.dev
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.
-----BEGIN PGP SIGNATURE-----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=Jjgv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=h4ch
-----END PGP SIGNATURE-----
Merge tag 'arm-dts-mv-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into soc/dt
ARM: dts: Move .dts files to vendor sub-directories
The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.
* tag 'arm-dts-mv-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
ARM: dts: Move .dts files to vendor sub-directories
kbuild: Support flat DTBs install
ARM: dts: Add .dts files missing from the build
ARM: dts: allwinner: Use quoted #include
Link: https://lore.kernel.org/r/20230621185025.GA3197738-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.
There's no change to dtbs_install as the flat structure is maintained on
install.
The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
company (e.g. gemini, nspire)
The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
