Meta (Facebook) has a preference for all of our secondary flash
chips to be labelled "alt-bmc" for consistency of userspace tools
deal with updates. Bletchley, Harma, Minerva, and Catalina all
follow this convention but for some reason Yosemite4 is different.
Adjust the label in the dts to match the other platforms.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://patch.msgid.link/20250107162726.232402-1-patrick@stwcx.xyz
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Revise adc128d818 adc mode on Fan Boards according to schematic.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://patch.msgid.link/20241003074251.3818101-9-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Change the address of Fan IC: Max31790 on fan boards according to
schematic.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://patch.msgid.link/20241003074251.3818101-8-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Change the address of the I2C mux for two fan boards to 0x74
according to schematic.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://patch.msgid.link/20241003074251.3818101-7-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add i2c-mux on Spider board for four NICs and add the temperature sensor
and EEPROM for the NICs.
Also remove the mctp-controller property on I2C bus 15 because we need
to add the property on the I2C mux to each NIC so that the MCTP driver
will ensure that each port is configured properly before communicating
with the NICs.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://patch.msgid.link/20241003074251.3818101-3-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add i2c mux to 8 slots of server board and add the io expanders and
eeprom for the slots.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://patch.msgid.link/20241003074251.3818101-2-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Remove IO expanders on I2C bus 13 according to schematic change.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://patch.msgid.link/20241001083021.3462426-1-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Remove the space in the compatible string of adm1272 to match the
pattern of compatible.
Fixes: 2b8d94f4b4 ("ARM: dts: aspeed: yosemite4: add Facebook Yosemite 4 BMC")
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Fixes: 2b8d94f4b4 ("ARM: dts: aspeed: yosemite4: add Facebook Yosemite 4 BMC")
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://patch.msgid.link/20240927085213.331127-1-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add I2C mux for Management Board to separate the I2C bus 35 for
updating CPLD firmware and I2C bus 34 for the other devices.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://patch.msgid.link/20240926033534.4174707-1-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Revise flash layout to 128MB since we are using 1GB flash memory in our
project.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://patch.msgid.link/20240924094430.272074-3-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Revise quad mode to dual mode to keep the write protect feature for the
SPI flash because the WP pin is the same pin with IO2 pin in quad mode.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://patch.msgid.link/20240924094430.272074-2-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Revise adc128d818 adc mode on Spider Board according to schematic.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://patch.msgid.link/20240920085007.1076174-1-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
We use CPLD to emulate gpio pca9506 I/O expander on each server
boards.
Therefore, add pca9506 to probe driver for the CPLD I/O expander.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://patch.msgid.link/20240910054751.2943217-3-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Revise to use adm1281 for HSC according to the hardware design change.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://patch.msgid.link/20240910054751.2943217-2-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Enable interrupt setting and add GPIO line name for pca9555 for the I/O
expanders on Medusa board.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://patch.msgid.link/20240918101742.1346788-1-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Change eeprom on Medusa Board to AT24C128 according to hardware change.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://patch.msgid.link/20240910084109.3585923-1-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Remove two temperature sensors on Medusa Board according to hardware
change.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://patch.msgid.link/20240910085701.3595248-1-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Since the ocp debug card only supports 100k, the bus is also set to 100k.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
[AJ: Fixed fuzz due to prior IPMB patch]
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add linux device tree entry for Yosemite 4 devices connected to BMC.
The Yosemite 4 is a Meta multi-node server platform, based on AST2600 SoC.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230810070032.335161-3-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
