Add four I/O expanders on each i2c of fan control board (FCB), assign the
GPIO line name to each GPIO in use, and specify the interrupt GPIO number
for each FCB's i/o expander.
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Link: https://patch.msgid.link/20241212133226.342937-3-yangchen.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add three I/O expanders on i2c bus 0, assign the GPIO line name to each
GPIO in use, and specify the interrupt GPIO that has been used on it and
give the interrupt gpio number.
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Link: https://patch.msgid.link/20241212133226.342937-2-yangchen.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
The Minerva platform has 16 compute blades and 6 network blades, each with
an EEPROM that can be operated by the CMM. This commit adds support for
each FRU.
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Link: https://patch.msgid.link/20240924140215.2484170-4-yangchen.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Modify the SGPIO line names sent from the CMM CPLD in the DVT version and
map the blade and FCB numbers to match the silkscreen labels on the rack as
follows:
1. Change the compute blade numbering from 0-15 to 1-16.
2. Change the network blade numbering from 0-5 to 1-6.
3. Update the FCB numbering from TOP0/1, MID0/1, and BOT0/1 to FCB1-6.
4. Revise the SGPIO line name for DVT changed.
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Link: https://patch.msgid.link/20240924140215.2484170-2-yangchen.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Switch the i2c bus number to map the i2c tag according to the hardware
design.
Signed-off-by: Yang Chen <yang.chen@quantatw.com>
Link: https://lore.kernel.org/r/20240626130332.929534-15-yangchen.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change the RTC reference from on-chip to externel on i2c bus 9 and address
is 0x51.
Signed-off-by: Yang Chen <yang.chen@quantatw.com>
Link: https://lore.kernel.org/r/20240626130332.929534-5-yangchen.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Revise the address of tmp75 on I2C bus 1 from 0x48 to 0x4f due to design
change.
Signed-off-by: Yang Chen <yang.chen@quantatw.com>
Link: https://lore.kernel.org/r/20240626130332.929534-2-yangchen.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add the SGPIO line name that the project's function can use by the
meaningful name.
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-12-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add the GPIO line name that the project's function can use by the
meaningful name.
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-11-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add led-fan-fault gpio pin on the PCA9555 on the i2c bus 0.
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-10-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add fan rpm controller max31790 on all bus of FCB.
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-9-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add bus labels and aliases for the fan control board.
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-8-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Correct the address from 0x51 to 0x54 of eeprom on the i2c bus 1
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-7-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Add one temperature sensor on i2c bus 1
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-6-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Enable power monitor device ina230 and ltc2945 on the i2c bus 0
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-5-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Correct the sgpio use from sgpiom1 to sgpiom0
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-4-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Remove the unuse setting and fix the link to 100 M
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-3-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
The project Minerva which is the platform used by Meta has two boards: the
Chassis Management Module (Minerva) and the Motherboard (Harma), so change
the DTS name to minerva here for CMM use.
Signed-off-by: Yang Chen <yangchen.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231212075200.983536-2-yangchen.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
