Proxmox-Port/linux
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2025-08-26 01:02:46 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
1,382,365 Commits 108 Branches 5,270 Tags 6.1 GiB
master
Commit Graph

32 Commits

Author SHA1 Message Date
Peter Yin
2236141ed3 ARM: dts: aspeed: harma: add mmc health 
Add a GPIO expander node at address 0x13 on i2c11 bus
to monitor MMC health status via a dedicated GPIO line.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://patch.msgid.link/20250611080514.3123335-6-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2025-07-04 13:28:25 +09:30
Peter Yin
ce5b2797b4 ARM: dts: aspeed: Harma: revise gpio bride pin for battery 
Update the GPIO bridge pin configuration for the battery circuit
on the Harma platform to reflect the correct hardware design.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://patch.msgid.link/20250611080514.3123335-5-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2025-07-04 13:28:25 +09:30
Peter Yin
de5cdbff1e ARM: dts: aspeed: harma: add ADC128D818 for voltage monitoring 
Add the ADC128D818 device to I2C bus 29 to support voltage monitoring
on the Harma platform. This enables accurate measurement of system
voltages through the onboard ADC.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://patch.msgid.link/20250611080514.3123335-4-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2025-07-04 13:28:25 +09:30
Peter Yin
32885aa268 ARM: dts: aspeed: harma: add fan board I/O expander 
Add GPIO I/O expander node for the fan board to detect and monitor
fan board status.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://patch.msgid.link/20250611080514.3123335-3-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2025-07-04 13:28:25 +09:30
Peter Yin
cffc64d37d ARM: dts: aspeed: harma: add E1.S power monitor 
Add the E1.S power monitor device node to the Harma device tree
to enable power monitoring functionality for E1.S drives.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://patch.msgid.link/20250611080514.3123335-2-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2025-07-04 13:28:25 +09:30
Peter Yin
cb3f397b17 ARM: dts: aspeed: Harma: revise sgpio line name 
power-card-enable
power-fault-n
power-hsc-good
power-chassis-good

asic0-card-type-detection0-n
asic0-card-type-detection1-n
asic0-card-type-detection2-n
presence-cmm

uart-switch-button
uart-switch-lsb
uart-switch-msb

reset-control-cmos-clear

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://patch.msgid.link/20240909080459.3457853-3-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2024-12-13 15:46:57 +10:30
Peter Yin
ed024f2894 ARM: dts: aspeed: Harma: add rtc device 
Add "nxp,pcf8563" device and the slave address is 0x51.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://patch.msgid.link/20240909080459.3457853-2-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2024-12-13 15:46:57 +10:30
Peter Yin
d212c55cc8 ARM: dts: aspeed: harma: Remove pca9546 
Remove pca9546 device from i2c bus 9.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-12-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
 2024-08-22 13:09:43 +09:30
Peter Yin
7fa1118485 ARM: dts: aspeed: harma: Fix spi-gpio dtb_check warnings 
Revise spi-gpio node and property name and remove max-ngpios.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-11-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
 2024-08-22 13:09:43 +09:30
Peter Yin
c8d75c1836 ARM: dts: aspeed: harma: Enable mctp controller 
Enable the mctp controller in i2c9.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-10-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
 2024-08-22 13:09:43 +09:30
Peter Yin
43a688a9e9 ARM: dts: aspeed: harma: Add temperature device 
Add temperature device in i2c0 and i2c2.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-9-peteryin.openbmc@gmail.com
[andrew: Fixed 'deivce' typo in commit message]
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
 2024-08-22 13:09:43 +09:30
Peter Yin
687d7e1804 ARM: dts: aspeed: harma: Add fru device 
Add Aegis fru device and gpio expander device in bus 11.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-8-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
 2024-08-22 13:09:43 +09:30
Peter Yin
bdf27467ba ARM: dts: aspeed: harma: Remove multi-host property 
Harma is single host, so remove multi-host property.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-7-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
 2024-08-22 13:09:42 +09:30
Peter Yin
f0ad6cc9f6 ARM: dts: aspeed: harma: Add power monitor xdp710 
Add HSC xdp710 device in i2c4.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-6-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
 2024-08-22 13:09:37 +09:30
Peter Yin
7d0597019a ARM: dts: aspeed: harma: Add ina238 
Add INA238 power monitor for Harma fan board.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-5-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
 2024-08-22 13:08:11 +09:30
Peter Yin
aeebc5a412 ARM: dts: aspeed: harma: Add sgpio name 
Add power-chassis-control and power-chassis-power for phosphor-power.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-4-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
 2024-08-22 13:08:11 +09:30
Peter Yin
b44b6e3f40 ARM: dts: aspeed: harma: Add VR devices 
Add isl69260, xdpe152c4 devices.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-3-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
 2024-08-22 13:08:07 +09:30
Peter Yin
16d6671033 ARM: dts: aspeed: harma: Revise hsc chip 
Revise HSC chip name and address to match LTC4287.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240801160136.1281291-2-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
 2024-08-22 13:07:37 +09:30
Krzysztof Kozlowski
10182a1259 ARM: dts: aspeed: harma: correct Mellanox multi-host property 
"mlx,multi-host" is using incorrect vendor prefix and is not documented.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240405064624.18997-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2024-05-01 11:49:20 +09:30
Peter Yin
4424cd4db6 ARM: dts: aspeed: Harma: Modify GPIO line name 
Add:
"reset-cause-platrst", "cpu0-err-alert", "leakage-detect-alert",
"presence-post-card", "ac-power-button", "P0_I3C_APML_ALERT_L",
"irq-uv-detect-alert", "irq-hsc-alert", "cpu0-prochot-alert",
"cpu0-thermtrip-alert", "reset-cause-pcie", "pvdd11-ocp-alert"

Rename:
"power-cpu-good" to "host0-ready",
"host-ready-n" to "post-end-n

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240412091600.2534693-13-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2024-05-01 11:49:19 +09:30
Peter Yin
287ba28a69 ARM: dts: aspeed: Harma: Add retimer device 
Add pt5161l device in i2c bus12 and bus21.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240412091600.2534693-12-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2024-05-01 11:49:19 +09:30
Peter Yin
4187ccb5a4 ARM: dts: aspeed: Harma: Revise node name 
Revise max31790 and delta_brick node name.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240412091600.2534693-11-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2024-05-01 11:49:19 +09:30
Peter Yin
fc2891c745 ARM: dts: aspeed: Harma: Add ltc4286 device 
Add ltc4286 device.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240412091600.2534693-10-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2024-05-01 11:49:19 +09:30
Peter Yin
0a6821e249 ARM: dts: aspeed: Harma: Add NIC Fru device 
Add MB NIC Device

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240412091600.2534693-9-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2024-05-01 11:49:19 +09:30
Peter Yin
7b55cf239c ARM: dts: aspeed: Harma: Revise max31790 address 
Revise max31790 address from 0x30 to 0x5e

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240412091600.2534693-8-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2024-05-01 11:49:19 +09:30
Peter Yin
645f9eb1bd ARM: dts: aspeed: Harma: Add PDB temperature 
Add PDB temperature sensor.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240412091600.2534693-7-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2024-05-01 11:49:19 +09:30
Peter Yin
3042a7e557 ARM: dts: aspeed: Harma: Add spi-gpio 
Add spi-gpio for tpm device.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240412091600.2534693-6-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2024-05-01 11:49:19 +09:30
Peter Yin
5a29fd7ad4 ARM: dts: aspeed: Harma: Add cpu power good line name 
Add a line name for cpu power good.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240412091600.2534693-5-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2024-05-01 11:49:19 +09:30
Peter Yin
f8bbe984ef ARM: dts: aspeed: Harma: Remove Vuart 
Remove vuart to avoid port conflict with uart2

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240412091600.2534693-4-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2024-05-01 11:49:19 +09:30
Peter Yin
d965bbe65b ARM: dts: aspeed: Harma: mapping ttyS2 to UART4. 
Change routing to match SOL(Serial Over LAN) settings.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240412091600.2534693-3-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2024-05-01 11:49:18 +09:30
Peter Yin
a78bfc1096 ARM: dts: aspeed: Harma: Revise SGPIO line name. 
The same name as reset-control-smb-e1s
change to reset-control-smb-e1s-0 and reset-control-smb-e1s-0.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Link: https://lore.kernel.org/r/20240412091600.2534693-2-peteryin.openbmc@gmail.com
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2024-05-01 11:49:18 +09:30
Peter Yin
bb3776e564 ARM: dts: aspeed: Harma: Add Meta Harma (AST2600) BMC 
Add linux device tree entry related to
the Meta(Facebook) computer-node system use an AT2600 BMC.
This node is named "Harma".

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20231211162656.2564267-3-peteryin.openbmc@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
 2024-05-01 11:49:18 +09:30