diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
index a5598ade399f..2267c5107d60 100644
--- a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
@@ -39,49 +39,14 @@ patternProperties:
   "^.*@[0-3],[a-f0-9]+$":
     type: object
     additionalProperties: true
-    description:
-      The actual device nodes should be added as subnodes to the SROMc node.
-      These subnodes, in addition to regular device specification, should
-      contain the following properties, describing configuration
-      of the relevant SROM bank.
 
     properties:
-      reg:
-        description:
-          Bank number, base address (relative to start of the bank) and size
-          of the memory mapped for the device. Note that base address will be
-          typically 0 as this is the start of the bank.
-        maxItems: 1
-
       reg-io-width:
         enum: [1, 2]
         description:
           Data width in bytes (1 or 2). If omitted, default of 1 is used.
 
-      samsung,srom-page-mode:
-        description:
-          If page mode is set, 4 data page mode will be configured,
-          else normal (1 data) page mode will be set.
-        type: boolean
-
-      samsung,srom-timing:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 6
-        maxItems: 6
-        description: |
-          Array of 6 integers, specifying bank timings in the following order:
-          Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.
-          Each value is specified in cycles and has the following meaning
-          and valid range:
-          Tacp: Page mode access cycle at Page mode (0 - 15)
-          Tcah: Address holding time after CSn (0 - 15)
-          Tcoh: Chip selection hold on OEn (0 - 15)
-          Tacc: Access cycle (0 - 31, the actual time is N + 1)
-          Tcos: Chip selection set-up before OEn (0 - 15)
-          Tacs: Address set-up before CSn (0 - 15)
-
     required:
-      - reg
       - samsung,srom-timing
 
 required:
diff --git a/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
index 11bc8a33d022..73a6dac946b7 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
@@ -37,6 +37,7 @@ allOf:
   - $ref: ingenic,nemc-peripherals.yaml#
   - $ref: intel,ixp4xx-expansion-peripheral-props.yaml#
   - $ref: qcom,ebi2-peripheral-props.yaml#
+  - $ref: samsung,exynos4210-srom-peripheral-props.yaml#
   - $ref: ti,gpmc-child.yaml#
   - $ref: fsl/fsl,imx-weim-peripherals.yaml
 
diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos4210-srom-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos4210-srom-peripheral-props.yaml
new file mode 100644
index 000000000000..c474f90846e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos4210-srom-peripheral-props.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/samsung,exynos4210-srom-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral Properties for Samsung Exynos SoC SROM Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  samsung,srom-page-mode:
+    description:
+      If page mode is set, 4 data page mode will be configured,
+      else normal (1 data) page mode will be set.
+    type: boolean
+
+  samsung,srom-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 6
+    maxItems: 6
+    description: |
+      Array of 6 integers, specifying bank timings in the following order:
+      Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.
+      Each value is specified in cycles and has the following meaning
+      and valid range:
+      Tacp: Page mode access cycle at Page mode (0 - 15)
+      Tcah: Address holding time after CSn (0 - 15)
+      Tcoh: Chip selection hold on OEn (0 - 15)
+      Tacc: Access cycle (0 - 31, the actual time is N + 1)
+      Tcos: Chip selection set-up before OEn (0 - 15)
+      Tacs: Address set-up before CSn (0 - 15)
+
+additionalProperties: true