mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-10-27 21:41:40 +00:00
4baa992243
Move platform independent header files to arch/arm/include/asm, leaving those in asm/arch* and asm/plat* alone. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
218 lines
7.0 KiB
C
218 lines
7.0 KiB
C
/*
|
|
* arch/arm/include/asm/hardware/locomo.h
|
|
*
|
|
* This file contains the definitions for the LoCoMo G/A Chip
|
|
*
|
|
* (C) Copyright 2004 John Lenz
|
|
*
|
|
* May be copied or modified under the terms of the GNU General Public
|
|
* License. See linux/COPYING for more information.
|
|
*
|
|
* Based on sa1111.h
|
|
*/
|
|
#ifndef _ASM_ARCH_LOCOMO
|
|
#define _ASM_ARCH_LOCOMO
|
|
|
|
#define locomo_writel(val,addr) ({ *(volatile u16 *)(addr) = (val); })
|
|
#define locomo_readl(addr) (*(volatile u16 *)(addr))
|
|
|
|
/* LOCOMO version */
|
|
#define LOCOMO_VER 0x00
|
|
|
|
/* Pin status */
|
|
#define LOCOMO_ST 0x04
|
|
|
|
/* Pin status */
|
|
#define LOCOMO_C32K 0x08
|
|
|
|
/* Interrupt controller */
|
|
#define LOCOMO_ICR 0x0C
|
|
|
|
/* MCS decoder for boot selecting */
|
|
#define LOCOMO_MCSX0 0x10
|
|
#define LOCOMO_MCSX1 0x14
|
|
#define LOCOMO_MCSX2 0x18
|
|
#define LOCOMO_MCSX3 0x1c
|
|
|
|
/* Touch panel controller */
|
|
#define LOCOMO_ASD 0x20 /* AD start delay */
|
|
#define LOCOMO_HSD 0x28 /* HSYS delay */
|
|
#define LOCOMO_HSC 0x2c /* HSYS period */
|
|
#define LOCOMO_TADC 0x30 /* tablet ADC clock */
|
|
|
|
|
|
/* Long time timer */
|
|
#define LOCOMO_LTC 0xd8 /* LTC interrupt setting */
|
|
#define LOCOMO_LTINT 0xdc /* LTC interrupt */
|
|
|
|
/* DAC control signal for LCD (COMADJ ) */
|
|
#define LOCOMO_DAC 0xe0
|
|
/* DAC control */
|
|
#define LOCOMO_DAC_SCLOEB 0x08 /* SCL pin output data */
|
|
#define LOCOMO_DAC_TEST 0x04 /* Test bit */
|
|
#define LOCOMO_DAC_SDA 0x02 /* SDA pin level (read-only) */
|
|
#define LOCOMO_DAC_SDAOEB 0x01 /* SDA pin output data */
|
|
|
|
/* SPI interface */
|
|
#define LOCOMO_SPI 0x60
|
|
#define LOCOMO_SPIMD 0x00 /* SPI mode setting */
|
|
#define LOCOMO_SPICT 0x04 /* SPI mode control */
|
|
#define LOCOMO_SPIST 0x08 /* SPI status */
|
|
#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */
|
|
#define LOCOMO_SPI_REND (1 << 2) /* Receive end bit */
|
|
#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */
|
|
#define LOCOMO_SPI_RFR (1) /* read buffer bit */
|
|
|
|
#define LOCOMO_SPIIS 0x10 /* SPI interrupt status */
|
|
#define LOCOMO_SPIWE 0x14 /* SPI interrupt status write enable */
|
|
#define LOCOMO_SPIIE 0x18 /* SPI interrupt enable */
|
|
#define LOCOMO_SPIIR 0x1c /* SPI interrupt request */
|
|
#define LOCOMO_SPITD 0x20 /* SPI transfer data write */
|
|
#define LOCOMO_SPIRD 0x24 /* SPI receive data read */
|
|
#define LOCOMO_SPITS 0x28 /* SPI transfer data shift */
|
|
#define LOCOMO_SPIRS 0x2C /* SPI receive data shift */
|
|
|
|
/* GPIO */
|
|
#define LOCOMO_GPD 0x90 /* GPIO direction */
|
|
#define LOCOMO_GPE 0x94 /* GPIO input enable */
|
|
#define LOCOMO_GPL 0x98 /* GPIO level */
|
|
#define LOCOMO_GPO 0x9c /* GPIO out data setting */
|
|
#define LOCOMO_GRIE 0xa0 /* GPIO rise detection */
|
|
#define LOCOMO_GFIE 0xa4 /* GPIO fall detection */
|
|
#define LOCOMO_GIS 0xa8 /* GPIO edge detection status */
|
|
#define LOCOMO_GWE 0xac /* GPIO status write enable */
|
|
#define LOCOMO_GIE 0xb0 /* GPIO interrupt enable */
|
|
#define LOCOMO_GIR 0xb4 /* GPIO interrupt request */
|
|
#define LOCOMO_GPIO(Nb) (0x01 << (Nb))
|
|
#define LOCOMO_GPIO_RTS LOCOMO_GPIO(0)
|
|
#define LOCOMO_GPIO_CTS LOCOMO_GPIO(1)
|
|
#define LOCOMO_GPIO_DSR LOCOMO_GPIO(2)
|
|
#define LOCOMO_GPIO_DTR LOCOMO_GPIO(3)
|
|
#define LOCOMO_GPIO_LCD_VSHA_ON LOCOMO_GPIO(4)
|
|
#define LOCOMO_GPIO_LCD_VSHD_ON LOCOMO_GPIO(5)
|
|
#define LOCOMO_GPIO_LCD_VEE_ON LOCOMO_GPIO(6)
|
|
#define LOCOMO_GPIO_LCD_MOD LOCOMO_GPIO(7)
|
|
#define LOCOMO_GPIO_DAC_ON LOCOMO_GPIO(8)
|
|
#define LOCOMO_GPIO_FL_VR LOCOMO_GPIO(9)
|
|
#define LOCOMO_GPIO_DAC_SDATA LOCOMO_GPIO(10)
|
|
#define LOCOMO_GPIO_DAC_SCK LOCOMO_GPIO(11)
|
|
#define LOCOMO_GPIO_DAC_SLOAD LOCOMO_GPIO(12)
|
|
#define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13)
|
|
#define LOCOMO_GPIO_WRITE_PROT LOCOMO_GPIO(14)
|
|
#define LOCOMO_GPIO_CARD_POWER LOCOMO_GPIO(15)
|
|
|
|
/* Start the definitions of the devices. Each device has an initial
|
|
* base address and a series of offsets from that base address. */
|
|
|
|
/* Keyboard controller */
|
|
#define LOCOMO_KEYBOARD 0x40
|
|
#define LOCOMO_KIB 0x00 /* KIB level */
|
|
#define LOCOMO_KSC 0x04 /* KSTRB control */
|
|
#define LOCOMO_KCMD 0x08 /* KSTRB command */
|
|
#define LOCOMO_KIC 0x0c /* Key interrupt */
|
|
|
|
/* Front light adjustment controller */
|
|
#define LOCOMO_FRONTLIGHT 0xc8
|
|
#define LOCOMO_ALS 0x00 /* Adjust light cycle */
|
|
#define LOCOMO_ALD 0x04 /* Adjust light duty */
|
|
|
|
#define LOCOMO_ALC_EN 0x8000
|
|
|
|
/* Backlight controller: TFT signal */
|
|
#define LOCOMO_BACKLIGHT 0x38
|
|
#define LOCOMO_TC 0x00 /* TFT control signal */
|
|
#define LOCOMO_CPSD 0x04 /* CPS delay */
|
|
|
|
/* Audio controller */
|
|
#define LOCOMO_AUDIO 0x54
|
|
#define LOCOMO_ACC 0x00 /* Audio clock */
|
|
#define LOCOMO_PAIF 0xD0 /* PCM audio interface */
|
|
/* Audio clock */
|
|
#define LOCOMO_ACC_XON 0x80
|
|
#define LOCOMO_ACC_XEN 0x40
|
|
#define LOCOMO_ACC_XSEL0 0x00
|
|
#define LOCOMO_ACC_XSEL1 0x20
|
|
#define LOCOMO_ACC_MCLKEN 0x10
|
|
#define LOCOMO_ACC_64FSEN 0x08
|
|
#define LOCOMO_ACC_CLKSEL000 0x00 /* mclk 2 */
|
|
#define LOCOMO_ACC_CLKSEL001 0x01 /* mclk 3 */
|
|
#define LOCOMO_ACC_CLKSEL010 0x02 /* mclk 4 */
|
|
#define LOCOMO_ACC_CLKSEL011 0x03 /* mclk 6 */
|
|
#define LOCOMO_ACC_CLKSEL100 0x04 /* mclk 8 */
|
|
#define LOCOMO_ACC_CLKSEL101 0x05 /* mclk 12 */
|
|
/* PCM audio interface */
|
|
#define LOCOMO_PAIF_SCINV 0x20
|
|
#define LOCOMO_PAIF_SCEN 0x10
|
|
#define LOCOMO_PAIF_LRCRST 0x08
|
|
#define LOCOMO_PAIF_LRCEVE 0x04
|
|
#define LOCOMO_PAIF_LRCINV 0x02
|
|
#define LOCOMO_PAIF_LRCEN 0x01
|
|
|
|
/* LED controller */
|
|
#define LOCOMO_LED 0xe8
|
|
#define LOCOMO_LPT0 0x00
|
|
#define LOCOMO_LPT1 0x04
|
|
/* LED control */
|
|
#define LOCOMO_LPT_TOFH 0x80
|
|
#define LOCOMO_LPT_TOFL 0x08
|
|
#define LOCOMO_LPT_TOH(TOH) ((TOH & 0x7) << 4)
|
|
#define LOCOMO_LPT_TOL(TOL) ((TOL & 0x7))
|
|
|
|
extern struct bus_type locomo_bus_type;
|
|
|
|
#define LOCOMO_DEVID_KEYBOARD 0
|
|
#define LOCOMO_DEVID_FRONTLIGHT 1
|
|
#define LOCOMO_DEVID_BACKLIGHT 2
|
|
#define LOCOMO_DEVID_AUDIO 3
|
|
#define LOCOMO_DEVID_LED 4
|
|
#define LOCOMO_DEVID_UART 5
|
|
#define LOCOMO_DEVID_SPI 6
|
|
|
|
struct locomo_dev {
|
|
struct device dev;
|
|
unsigned int devid;
|
|
unsigned int irq[1];
|
|
|
|
void *mapbase;
|
|
unsigned long length;
|
|
|
|
u64 dma_mask;
|
|
};
|
|
|
|
#define LOCOMO_DEV(_d) container_of((_d), struct locomo_dev, dev)
|
|
|
|
#define locomo_get_drvdata(d) dev_get_drvdata(&(d)->dev)
|
|
#define locomo_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, p)
|
|
|
|
struct locomo_driver {
|
|
struct device_driver drv;
|
|
unsigned int devid;
|
|
int (*probe)(struct locomo_dev *);
|
|
int (*remove)(struct locomo_dev *);
|
|
int (*suspend)(struct locomo_dev *, pm_message_t);
|
|
int (*resume)(struct locomo_dev *);
|
|
};
|
|
|
|
#define LOCOMO_DRV(_d) container_of((_d), struct locomo_driver, drv)
|
|
|
|
#define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name)
|
|
|
|
void locomo_lcd_power(struct locomo_dev *, int, unsigned int);
|
|
|
|
int locomo_driver_register(struct locomo_driver *);
|
|
void locomo_driver_unregister(struct locomo_driver *);
|
|
|
|
/* GPIO control functions */
|
|
void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir);
|
|
int locomo_gpio_read_level(struct device *dev, unsigned int bits);
|
|
int locomo_gpio_read_output(struct device *dev, unsigned int bits);
|
|
void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set);
|
|
|
|
/* M62332 control function */
|
|
void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel);
|
|
|
|
/* Frontlight control */
|
|
void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf);
|
|
|
|
#endif
|