mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-10-31 16:23:20 +00:00
48936a08b8
P1021 is a dual e500v2 core based SOC with: * 3 eTSECs (eTSEC1/3 RGMII, eTSEC2 SGMII on this board) * 2 PCIe Controller * 1 USB2.0 controller * eSDHC, eSPI, I2C, DUART * eLBC (NAND, BCSR, PMC0/1) * Security Engine (SEC 3.3.2) * Quicc Engine (QE) Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Yu Liu <Yu.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
699 lines
16 KiB
Plaintext
699 lines
16 KiB
Plaintext
/*
|
|
* P1021 MDS Device Tree Source
|
|
*
|
|
* Copyright 2010 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
/ {
|
|
model = "fsl,P1021";
|
|
compatible = "fsl,P1021MDS";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
aliases {
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
ethernet0 = &enet0;
|
|
ethernet1 = &enet1;
|
|
ethernet2 = &enet2;
|
|
ethernet3 = &enet3;
|
|
ethernet4 = &enet4;
|
|
pci0 = &pci0;
|
|
pci1 = &pci1;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,P1021@0 {
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
|
|
PowerPC,P1021@1 {
|
|
device_type = "cpu";
|
|
reg = <0x1>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
};
|
|
|
|
localbus@ffe05000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
|
|
reg = <0 0xffe05000 0 0x1000>;
|
|
interrupts = <19 2>;
|
|
interrupt-parent = <&mpic>;
|
|
|
|
/* NAND Flash, BCSR, PMC0/1*/
|
|
ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
|
|
0x1 0x0 0x0 0xf8000000 0x00008000
|
|
0x2 0x0 0x0 0xf8010000 0x00020000
|
|
0x3 0x0 0x0 0xf8020000 0x00020000>;
|
|
|
|
nand@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,p1021-fcm-nand",
|
|
"fsl,elbc-fcm-nand";
|
|
reg = <0x0 0x0 0x40000>;
|
|
|
|
partition@0 {
|
|
/* This location must not be altered */
|
|
/* 1MB for u-boot Bootloader Image */
|
|
reg = <0x0 0x00100000>;
|
|
label = "NAND (RO) U-Boot Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
/* 1MB for DTB Image */
|
|
reg = <0x00100000 0x00100000>;
|
|
label = "NAND (RO) DTB Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@200000 {
|
|
/* 4MB for Linux Kernel Image */
|
|
reg = <0x00200000 0x00400000>;
|
|
label = "NAND (RO) Linux Kernel Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@600000 {
|
|
/* 5MB for Compressed Root file System Image */
|
|
reg = <0x00600000 0x00500000>;
|
|
label = "NAND (RO) Compressed RFS Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@b00000 {
|
|
/* 6MB for JFFS2 based Root file System */
|
|
reg = <0x00a00000 0x00600000>;
|
|
label = "NAND (RW) JFFS2 Root File System";
|
|
};
|
|
|
|
partition@1100000 {
|
|
/* 14MB for JFFS2 based Root file System */
|
|
reg = <0x01100000 0x00e00000>;
|
|
label = "NAND (RW) Writable User area";
|
|
};
|
|
|
|
partition@1f00000 {
|
|
/* 1MB for microcode */
|
|
reg = <0x01f00000 0x00100000>;
|
|
label = "NAND (RO) QE Ucode";
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
bcsr@1,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,p1021mds-bcsr";
|
|
reg = <1 0 0x8000>;
|
|
ranges = <0 1 0 0x8000>;
|
|
};
|
|
|
|
pib@2,0 {
|
|
compatible = "fsl,p1021mds-pib";
|
|
reg = <2 0 0x10000>;
|
|
};
|
|
|
|
pib@3,0 {
|
|
compatible = "fsl,p1021mds-pib";
|
|
reg = <3 0 0x10000>;
|
|
};
|
|
};
|
|
|
|
soc@ffe00000 {
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
compatible = "fsl,p1021-immr", "simple-bus";
|
|
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
|
bus-frequency = <0>; // Filled out by uboot.
|
|
|
|
ecm-law@0 {
|
|
compatible = "fsl,ecm-law";
|
|
reg = <0x0 0x1000>;
|
|
fsl,num-laws = <12>;
|
|
};
|
|
|
|
ecm@1000 {
|
|
compatible = "fsl,p1021-ecm", "fsl,ecm";
|
|
reg = <0x1000 0x1000>;
|
|
interrupts = <16 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
memory-controller@2000 {
|
|
compatible = "fsl,p1021-memory-controller";
|
|
reg = <0x2000 0x1000>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <16 2>;
|
|
};
|
|
|
|
i2c@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3000 0x100>;
|
|
interrupts = <43 2>;
|
|
interrupt-parent = <&mpic>;
|
|
dfsrr;
|
|
rtc@68 {
|
|
compatible = "dallas,ds1374";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
i2c@3100 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <1>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3100 0x100>;
|
|
interrupts = <43 2>;
|
|
interrupt-parent = <&mpic>;
|
|
dfsrr;
|
|
};
|
|
|
|
serial0: serial@4500 {
|
|
cell-index = <0>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4500 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <42 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
serial1: serial@4600 {
|
|
cell-index = <1>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4600 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <42 2>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
spi@7000 {
|
|
cell-index = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,espi";
|
|
reg = <0x7000 0x1000>;
|
|
interrupts = <59 0x2>;
|
|
interrupt-parent = <&mpic>;
|
|
espi,num-ss-bits = <4>;
|
|
mode = "cpu";
|
|
|
|
fsl_m25p80@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,espi-flash";
|
|
reg = <0>;
|
|
linux,modalias = "fsl_m25p80";
|
|
spi-max-frequency = <40000000>; /* input clock */
|
|
partition@u-boot {
|
|
label = "u-boot-spi";
|
|
reg = <0x00000000 0x00100000>;
|
|
read-only;
|
|
};
|
|
partition@kernel {
|
|
label = "kernel-spi";
|
|
reg = <0x00100000 0x00500000>;
|
|
read-only;
|
|
};
|
|
partition@dtb {
|
|
label = "dtb-spi";
|
|
reg = <0x00600000 0x00100000>;
|
|
read-only;
|
|
};
|
|
partition@fs {
|
|
label = "file system-spi";
|
|
reg = <0x00700000 0x00900000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
gpio: gpio-controller@f000 {
|
|
#gpio-cells = <2>;
|
|
compatible = "fsl,mpc8572-gpio";
|
|
reg = <0xf000 0x100>;
|
|
interrupts = <47 0x2>;
|
|
interrupt-parent = <&mpic>;
|
|
gpio-controller;
|
|
};
|
|
|
|
L2: l2-cache-controller@20000 {
|
|
compatible = "fsl,p1021-l2-cache-controller";
|
|
reg = <0x20000 0x1000>;
|
|
cache-line-size = <32>; // 32 bytes
|
|
cache-size = <0x40000>; // L2,256K
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <16 2>;
|
|
};
|
|
|
|
dma@21300 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,eloplus-dma";
|
|
reg = <0x21300 0x4>;
|
|
ranges = <0x0 0x21100 0x200>;
|
|
cell-index = <0>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x0 0x80>;
|
|
cell-index = <0>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <20 2>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x80 0x80>;
|
|
cell-index = <1>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <21 2>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x100 0x80>;
|
|
cell-index = <2>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <22 2>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,eloplus-dma-channel";
|
|
reg = <0x180 0x80>;
|
|
cell-index = <3>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <23 2>;
|
|
};
|
|
};
|
|
|
|
usb@22000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl-usb2-dr";
|
|
reg = <0x22000 0x1000>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <28 0x2>;
|
|
phy_type = "ulpi";
|
|
};
|
|
|
|
mdio@24000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,etsec2-mdio";
|
|
reg = <0x24000 0x1000 0xb0030 0x4>;
|
|
|
|
phy0: ethernet-phy@0 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <1 1>;
|
|
reg = <0x0>;
|
|
};
|
|
phy1: ethernet-phy@1 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <2 1>;
|
|
reg = <0x1>;
|
|
};
|
|
phy4: ethernet-phy@4 {
|
|
interrupt-parent = <&mpic>;
|
|
reg = <0x4>;
|
|
};
|
|
};
|
|
|
|
mdio@25000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,etsec2-tbi";
|
|
reg = <0x25000 0x1000 0xb1030 0x4>;
|
|
tbi0: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
|
|
enet0: ethernet@B0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cell-index = <0>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "fsl,etsec2";
|
|
fsl,num_rx_queues = <0x8>;
|
|
fsl,num_tx_queues = <0x8>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupt-parent = <&mpic>;
|
|
phy-handle = <&phy0>;
|
|
phy-connection-type = "rgmii-id";
|
|
queue-group@0{
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xB0000 0x1000>;
|
|
interrupts = <29 2 30 2 34 2>;
|
|
};
|
|
queue-group@1{
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xB4000 0x1000>;
|
|
interrupts = <17 2 18 2 24 2>;
|
|
};
|
|
};
|
|
|
|
enet1: ethernet@B1000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cell-index = <0>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "fsl,etsec2";
|
|
fsl,num_rx_queues = <0x8>;
|
|
fsl,num_tx_queues = <0x8>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupt-parent = <&mpic>;
|
|
phy-handle = <&phy4>;
|
|
tbi-handle = <&tbi0>;
|
|
phy-connection-type = "sgmii";
|
|
queue-group@0{
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xB1000 0x1000>;
|
|
interrupts = <35 2 36 2 40 2>;
|
|
};
|
|
queue-group@1{
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xB5000 0x1000>;
|
|
interrupts = <51 2 52 2 67 2>;
|
|
};
|
|
};
|
|
|
|
enet2: ethernet@B2000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
cell-index = <0>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "fsl,etsec2";
|
|
fsl,num_rx_queues = <0x8>;
|
|
fsl,num_tx_queues = <0x8>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupt-parent = <&mpic>;
|
|
phy-handle = <&phy1>;
|
|
phy-connection-type = "rgmii-id";
|
|
queue-group@0{
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xB2000 0x1000>;
|
|
interrupts = <31 2 32 2 33 2>;
|
|
};
|
|
queue-group@1{
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xB6000 0x1000>;
|
|
interrupts = <25 2 26 2 27 2>;
|
|
};
|
|
};
|
|
|
|
sdhci@2e000 {
|
|
compatible = "fsl,p1021-esdhc", "fsl,esdhc";
|
|
reg = <0x2e000 0x1000>;
|
|
interrupts = <72 0x2>;
|
|
interrupt-parent = <&mpic>;
|
|
/* Filled in by U-Boot */
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
crypto@30000 {
|
|
compatible = "fsl,sec3.3", "fsl,sec3.1",
|
|
"fsl,sec3.0", "fsl,sec2.4",
|
|
"fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
|
|
reg = <0x30000 0x10000>;
|
|
interrupts = <45 2 58 2>;
|
|
interrupt-parent = <&mpic>;
|
|
fsl,num-channels = <4>;
|
|
fsl,channel-fifo-len = <24>;
|
|
fsl,exec-units-mask = <0x97c>;
|
|
fsl,descriptor-types-mask = <0x3a30abf>;
|
|
};
|
|
|
|
mpic: pic@40000 {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x40000 0x40000>;
|
|
compatible = "chrp,open-pic";
|
|
device_type = "open-pic";
|
|
};
|
|
|
|
msi@41600 {
|
|
compatible = "fsl,p1021-msi", "fsl,mpic-msi";
|
|
reg = <0x41600 0x80>;
|
|
msi-available-ranges = <0 0x100>;
|
|
interrupts = <
|
|
0xe0 0
|
|
0xe1 0
|
|
0xe2 0
|
|
0xe3 0
|
|
0xe4 0
|
|
0xe5 0
|
|
0xe6 0
|
|
0xe7 0>;
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
global-utilities@e0000 { //global utilities block
|
|
compatible = "fsl,p1021-guts";
|
|
reg = <0xe0000 0x1000>;
|
|
fsl,has-rstcr;
|
|
};
|
|
|
|
par_io@e0100 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xe0100 0x60>;
|
|
ranges = <0x0 0xe0100 0x60>;
|
|
device_type = "par_io";
|
|
num-ports = <3>;
|
|
pio1: ucc_pin@01 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
|
|
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
|
|
0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */
|
|
0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9
|
|
*/
|
|
0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */
|
|
0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */
|
|
0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */
|
|
0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */
|
|
0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */
|
|
0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */
|
|
0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */
|
|
0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */
|
|
0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */
|
|
0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */
|
|
0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */
|
|
0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */
|
|
0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */
|
|
0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */
|
|
};
|
|
|
|
pio2: ucc_pin@02 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
|
|
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
|
|
0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */
|
|
0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */
|
|
0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */
|
|
0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */
|
|
0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */
|
|
0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */
|
|
0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */
|
|
0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */
|
|
};
|
|
};
|
|
};
|
|
|
|
pci0: pcie@ffe09000 {
|
|
compatible = "fsl,mpc8548-pcie";
|
|
device_type = "pci";
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0 0xffe09000 0 0x1000>;
|
|
bus-range = <0 255>;
|
|
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
|
|
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
|
|
clock-frequency = <33333333>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <16 2>;
|
|
interrupt-map-mask = <0xf800 0 0 7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x0 */
|
|
0000 0 0 1 &mpic 4 1
|
|
0000 0 0 2 &mpic 5 1
|
|
0000 0 0 3 &mpic 6 1
|
|
0000 0 0 4 &mpic 7 1
|
|
>;
|
|
pcie@0 {
|
|
reg = <0x0 0x0 0x0 0x0 0x0>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
ranges = <0x2000000 0x0 0xa0000000
|
|
0x2000000 0x0 0xa0000000
|
|
0x0 0x20000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x100000>;
|
|
};
|
|
};
|
|
|
|
pci1: pcie@ffe0a000 {
|
|
compatible = "fsl,mpc8548-pcie";
|
|
device_type = "pci";
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0 0xffe0a000 0 0x1000>;
|
|
bus-range = <0 255>;
|
|
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
|
|
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
|
|
clock-frequency = <33333333>;
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <16 2>;
|
|
interrupt-map-mask = <0xf800 0 0 7>;
|
|
interrupt-map = <
|
|
/* IDSEL 0x0 */
|
|
0000 0 0 1 &mpic 0 1
|
|
0000 0 0 2 &mpic 1 1
|
|
0000 0 0 3 &mpic 2 1
|
|
0000 0 0 4 &mpic 3 1
|
|
>;
|
|
pcie@0 {
|
|
reg = <0x0 0x0 0x0 0x0 0x0>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
ranges = <0x2000000 0x0 0xc0000000
|
|
0x2000000 0x0 0xc0000000
|
|
0x0 0x20000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x100000>;
|
|
};
|
|
};
|
|
|
|
qe@ffe80000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "qe";
|
|
compatible = "fsl,qe";
|
|
ranges = <0x0 0x0 0xffe80000 0x40000>;
|
|
reg = <0 0xffe80000 0 0x480>;
|
|
brg-frequency = <0>;
|
|
bus-frequency = <0>;
|
|
fsl,qe-num-riscs = <1>;
|
|
fsl,qe-num-snums = <28>;
|
|
|
|
qeic: interrupt-controller@80 {
|
|
interrupt-controller;
|
|
compatible = "fsl,qe-ic";
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x80 0x80>;
|
|
interrupts = <63 2 60 2>; //high:47 low:44
|
|
interrupt-parent = <&mpic>;
|
|
};
|
|
|
|
enet3: ucc@2000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <1>;
|
|
reg = <0x2000 0x200>;
|
|
interrupts = <32>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "clk12";
|
|
tx-clock-name = "clk9";
|
|
pio-handle = <&pio1>;
|
|
phy-handle = <&qe_phy0>;
|
|
phy-connection-type = "mii";
|
|
};
|
|
|
|
mdio@2120 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x2120 0x18>;
|
|
compatible = "fsl,ucc-mdio";
|
|
|
|
qe_phy0: ethernet-phy@0 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <4 1>;
|
|
reg = <0x0>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
qe_phy1: ethernet-phy@03 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <5 1>;
|
|
reg = <0x3>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
|
|
enet4: ucc@2400 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <5>;
|
|
reg = <0x2400 0x200>;
|
|
interrupts = <40>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk13";
|
|
pio-handle = <&pio2>;
|
|
phy-handle = <&qe_phy1>;
|
|
phy-connection-type = "rmii";
|
|
};
|
|
|
|
muram@10000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,qe-muram", "fsl,cpm-muram";
|
|
ranges = <0x0 0x10000 0x6000>;
|
|
|
|
data-only@0 {
|
|
compatible = "fsl,qe-muram-data",
|
|
"fsl,cpm-muram-data";
|
|
reg = <0x0 0x6000>;
|
|
};
|
|
};
|
|
};
|
|
};
|