mirror of
				https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
				synced 2025-10-31 04:31:19 +00:00 
			
		
		
		
	 76a95d75ed
			
		
	
	
		76a95d75ed
		
	
	
	
	
		
			
			Add SLI4 FC Discovery support - Replace READ_LA and READ_LA64 with READ_TOPOLOGY mailbox command. - Converted the old READ_LA structure to use bf_set/get instead of bit fields. - Rename HBA_FCOE_SUPPORT flag to HBA_FCOE_MODE. Flag now indicates function is running as SLI-4 FC or FCoE port. Make sure flag reset each time READ_REV completed as it can dynamically change. - Removed BDE union in the READ_TOPOLOGY mailbox command and added a define to define the ALPA MAP SIZE. Added FC Code for async events. - Added code to support new 16G link speed. - Define new set of values to keep track of valid user settable link speeds. - Used new link speed definitions to define link speed max and bitmap. - Redefined FDMI Port sppeds to be hax values and added the 16G value. - Added new CQE trailer code for FC Events. - Add lpfc_issue_init_vfi and lpfc_init_vfi_cmpl routines. - Replace many calls to the initial_flogi routine with lpfc_issue_init_vfi. - Add vp and vpi fields to the INIT_VFI mailbox command. - Addapt lpfc_hba_init_link routine for SLI4 use. - Use lpfc_hba_init_link call from lpfc_sli4_hba_setup. - Add a check for FC mode to register the FCFI before init link. - Convert lpfc_sli4_init_vpi to be called without a vpi (get it from vport). Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
		
			
				
	
	
		
			864 lines
		
	
	
		
			24 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			864 lines
		
	
	
		
			24 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*******************************************************************
 | |
|  * This file is part of the Emulex Linux Device Driver for         *
 | |
|  * Fibre Channel Host Bus Adapters.                                *
 | |
|  * Copyright (C) 2004-2008 Emulex.  All rights reserved.           *
 | |
|  * EMULEX and SLI are trademarks of Emulex.                        *
 | |
|  * www.emulex.com                                                  *
 | |
|  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
 | |
|  *                                                                 *
 | |
|  * This program is free software; you can redistribute it and/or   *
 | |
|  * modify it under the terms of version 2 of the GNU General       *
 | |
|  * Public License as published by the Free Software Foundation.    *
 | |
|  * This program is distributed in the hope that it will be useful. *
 | |
|  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
 | |
|  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
 | |
|  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
 | |
|  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
 | |
|  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
 | |
|  * more details, a copy of which can be found in the file COPYING  *
 | |
|  * included with this package.                                     *
 | |
|  *******************************************************************/
 | |
| 
 | |
| #include <linux/blkdev.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/dma-mapping.h>
 | |
| #include <linux/idr.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/kthread.h>
 | |
| #include <linux/pci.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/spinlock.h>
 | |
| 
 | |
| #include <scsi/scsi.h>
 | |
| #include <scsi/scsi_device.h>
 | |
| #include <scsi/scsi_host.h>
 | |
| #include <scsi/scsi_transport_fc.h>
 | |
| #include "lpfc_hw4.h"
 | |
| #include "lpfc_hw.h"
 | |
| #include "lpfc_sli.h"
 | |
| #include "lpfc_sli4.h"
 | |
| #include "lpfc_nl.h"
 | |
| #include "lpfc_disc.h"
 | |
| #include "lpfc_scsi.h"
 | |
| #include "lpfc.h"
 | |
| #include "lpfc_logmsg.h"
 | |
| #include "lpfc_crtn.h"
 | |
| #include "lpfc_version.h"
 | |
| #include "lpfc_vport.h"
 | |
| 
 | |
| inline void lpfc_vport_set_state(struct lpfc_vport *vport,
 | |
| 				 enum fc_vport_state new_state)
 | |
| {
 | |
| 	struct fc_vport *fc_vport = vport->fc_vport;
 | |
| 
 | |
| 	if (fc_vport) {
 | |
| 		/*
 | |
| 		 * When the transport defines fc_vport_set state we will replace
 | |
| 		 * this code with the following line
 | |
| 		 */
 | |
| 		/* fc_vport_set_state(fc_vport, new_state); */
 | |
| 		if (new_state != FC_VPORT_INITIALIZING)
 | |
| 			fc_vport->vport_last_state = fc_vport->vport_state;
 | |
| 		fc_vport->vport_state = new_state;
 | |
| 	}
 | |
| 
 | |
| 	/* for all the error states we will set the invternal state to FAILED */
 | |
| 	switch (new_state) {
 | |
| 	case FC_VPORT_NO_FABRIC_SUPP:
 | |
| 	case FC_VPORT_NO_FABRIC_RSCS:
 | |
| 	case FC_VPORT_FABRIC_LOGOUT:
 | |
| 	case FC_VPORT_FABRIC_REJ_WWN:
 | |
| 	case FC_VPORT_FAILED:
 | |
| 		vport->port_state = LPFC_VPORT_FAILED;
 | |
| 		break;
 | |
| 	case FC_VPORT_LINKDOWN:
 | |
| 		vport->port_state = LPFC_VPORT_UNKNOWN;
 | |
| 		break;
 | |
| 	default:
 | |
| 		/* do nothing */
 | |
| 		break;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int
 | |
| lpfc_alloc_vpi(struct lpfc_hba *phba)
 | |
| {
 | |
| 	int  vpi;
 | |
| 
 | |
| 	spin_lock_irq(&phba->hbalock);
 | |
| 	/* Start at bit 1 because vpi zero is reserved for the physical port */
 | |
| 	vpi = find_next_zero_bit(phba->vpi_bmask, (phba->max_vpi + 1), 1);
 | |
| 	if (vpi > phba->max_vpi)
 | |
| 		vpi = 0;
 | |
| 	else
 | |
| 		set_bit(vpi, phba->vpi_bmask);
 | |
| 	if (phba->sli_rev == LPFC_SLI_REV4)
 | |
| 		phba->sli4_hba.max_cfg_param.vpi_used++;
 | |
| 	spin_unlock_irq(&phba->hbalock);
 | |
| 	return vpi;
 | |
| }
 | |
| 
 | |
| static void
 | |
| lpfc_free_vpi(struct lpfc_hba *phba, int vpi)
 | |
| {
 | |
| 	if (vpi == 0)
 | |
| 		return;
 | |
| 	spin_lock_irq(&phba->hbalock);
 | |
| 	clear_bit(vpi, phba->vpi_bmask);
 | |
| 	if (phba->sli_rev == LPFC_SLI_REV4)
 | |
| 		phba->sli4_hba.max_cfg_param.vpi_used--;
 | |
| 	spin_unlock_irq(&phba->hbalock);
 | |
| }
 | |
| 
 | |
| static int
 | |
| lpfc_vport_sparm(struct lpfc_hba *phba, struct lpfc_vport *vport)
 | |
| {
 | |
| 	LPFC_MBOXQ_t *pmb;
 | |
| 	MAILBOX_t *mb;
 | |
| 	struct lpfc_dmabuf *mp;
 | |
| 	int  rc;
 | |
| 
 | |
| 	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 | |
| 	if (!pmb) {
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 	mb = &pmb->u.mb;
 | |
| 
 | |
| 	rc = lpfc_read_sparam(phba, pmb, vport->vpi);
 | |
| 	if (rc) {
 | |
| 		mempool_free(pmb, phba->mbox_mem_pool);
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Grab buffer pointer and clear context1 so we can use
 | |
| 	 * lpfc_sli_issue_box_wait
 | |
| 	 */
 | |
| 	mp = (struct lpfc_dmabuf *) pmb->context1;
 | |
| 	pmb->context1 = NULL;
 | |
| 
 | |
| 	pmb->vport = vport;
 | |
| 	rc = lpfc_sli_issue_mbox_wait(phba, pmb, phba->fc_ratov * 2);
 | |
| 	if (rc != MBX_SUCCESS) {
 | |
| 		if (signal_pending(current)) {
 | |
| 			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT,
 | |
| 					 "1830 Signal aborted mbxCmd x%x\n",
 | |
| 					 mb->mbxCommand);
 | |
| 			lpfc_mbuf_free(phba, mp->virt, mp->phys);
 | |
| 			kfree(mp);
 | |
| 			if (rc != MBX_TIMEOUT)
 | |
| 				mempool_free(pmb, phba->mbox_mem_pool);
 | |
| 			return -EINTR;
 | |
| 		} else {
 | |
| 			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT,
 | |
| 					 "1818 VPort failed init, mbxCmd x%x "
 | |
| 					 "READ_SPARM mbxStatus x%x, rc = x%x\n",
 | |
| 					 mb->mbxCommand, mb->mbxStatus, rc);
 | |
| 			lpfc_mbuf_free(phba, mp->virt, mp->phys);
 | |
| 			kfree(mp);
 | |
| 			if (rc != MBX_TIMEOUT)
 | |
| 				mempool_free(pmb, phba->mbox_mem_pool);
 | |
| 			return -EIO;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm));
 | |
| 	memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
 | |
| 	       sizeof (struct lpfc_name));
 | |
| 	memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
 | |
| 	       sizeof (struct lpfc_name));
 | |
| 
 | |
| 	lpfc_mbuf_free(phba, mp->virt, mp->phys);
 | |
| 	kfree(mp);
 | |
| 	mempool_free(pmb, phba->mbox_mem_pool);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int
 | |
| lpfc_valid_wwn_format(struct lpfc_hba *phba, struct lpfc_name *wwn,
 | |
| 		      const char *name_type)
 | |
| {
 | |
| 				/* ensure that IEEE format 1 addresses
 | |
| 				 * contain zeros in bits 59-48
 | |
| 				 */
 | |
| 	if (!((wwn->u.wwn[0] >> 4) == 1 &&
 | |
| 	      ((wwn->u.wwn[0] & 0xf) != 0 || (wwn->u.wwn[1] & 0xf) != 0)))
 | |
| 		return 1;
 | |
| 
 | |
| 	lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
 | |
| 			"1822 Invalid %s: %02x:%02x:%02x:%02x:"
 | |
| 			"%02x:%02x:%02x:%02x\n",
 | |
| 			name_type,
 | |
| 			wwn->u.wwn[0], wwn->u.wwn[1],
 | |
| 			wwn->u.wwn[2], wwn->u.wwn[3],
 | |
| 			wwn->u.wwn[4], wwn->u.wwn[5],
 | |
| 			wwn->u.wwn[6], wwn->u.wwn[7]);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int
 | |
| lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport)
 | |
| {
 | |
| 	struct lpfc_vport *vport;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	spin_lock_irqsave(&phba->hbalock, flags);
 | |
| 	list_for_each_entry(vport, &phba->port_list, listentry) {
 | |
| 		if (vport == new_vport)
 | |
| 			continue;
 | |
| 		/* If they match, return not unique */
 | |
| 		if (memcmp(&vport->fc_sparam.portName,
 | |
| 			   &new_vport->fc_sparam.portName,
 | |
| 			   sizeof(struct lpfc_name)) == 0) {
 | |
| 			spin_unlock_irqrestore(&phba->hbalock, flags);
 | |
| 			return 0;
 | |
| 		}
 | |
| 	}
 | |
| 	spin_unlock_irqrestore(&phba->hbalock, flags);
 | |
| 	return 1;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * lpfc_discovery_wait - Wait for driver discovery to quiesce
 | |
|  * @vport: The virtual port for which this call is being executed.
 | |
|  *
 | |
|  * This driver calls this routine specifically from lpfc_vport_delete
 | |
|  * to enforce a synchronous execution of vport
 | |
|  * delete relative to discovery activities.  The
 | |
|  * lpfc_vport_delete routine should not return until it
 | |
|  * can reasonably guarantee that discovery has quiesced.
 | |
|  * Post FDISC LOGO, the driver must wait until its SAN teardown is
 | |
|  * complete and all resources recovered before allowing
 | |
|  * cleanup.
 | |
|  *
 | |
|  * This routine does not require any locks held.
 | |
|  **/
 | |
| static void lpfc_discovery_wait(struct lpfc_vport *vport)
 | |
| {
 | |
| 	struct lpfc_hba *phba = vport->phba;
 | |
| 	uint32_t wait_flags = 0;
 | |
| 	unsigned long wait_time_max;
 | |
| 	unsigned long start_time;
 | |
| 
 | |
| 	wait_flags = FC_RSCN_MODE | FC_RSCN_DISCOVERY | FC_NLP_MORE |
 | |
| 		     FC_RSCN_DEFERRED | FC_NDISC_ACTIVE | FC_DISC_TMO;
 | |
| 
 | |
| 	/*
 | |
| 	 * The time constraint on this loop is a balance between the
 | |
| 	 * fabric RA_TOV value and dev_loss tmo.  The driver's
 | |
| 	 * devloss_tmo is 10 giving this loop a 3x multiplier minimally.
 | |
| 	 */
 | |
| 	wait_time_max = msecs_to_jiffies(((phba->fc_ratov * 3) + 3) * 1000);
 | |
| 	wait_time_max += jiffies;
 | |
| 	start_time = jiffies;
 | |
| 	while (time_before(jiffies, wait_time_max)) {
 | |
| 		if ((vport->num_disc_nodes > 0)    ||
 | |
| 		    (vport->fc_flag & wait_flags)  ||
 | |
| 		    ((vport->port_state > LPFC_VPORT_FAILED) &&
 | |
| 		     (vport->port_state < LPFC_VPORT_READY))) {
 | |
| 			lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
 | |
| 					"1833 Vport discovery quiesce Wait:"
 | |
| 					" state x%x fc_flags x%x"
 | |
| 					" num_nodes x%x, waiting 1000 msecs"
 | |
| 					" total wait msecs x%x\n",
 | |
| 					vport->port_state, vport->fc_flag,
 | |
| 					vport->num_disc_nodes,
 | |
| 					jiffies_to_msecs(jiffies - start_time));
 | |
| 			msleep(1000);
 | |
| 		} else {
 | |
| 			/* Base case.  Wait variants satisfied.  Break out */
 | |
| 			lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
 | |
| 					 "1834 Vport discovery quiesced:"
 | |
| 					 " state x%x fc_flags x%x"
 | |
| 					 " wait msecs x%x\n",
 | |
| 					 vport->port_state, vport->fc_flag,
 | |
| 					 jiffies_to_msecs(jiffies
 | |
| 						- start_time));
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (time_after(jiffies, wait_time_max))
 | |
| 		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
 | |
| 				"1835 Vport discovery quiesce failed:"
 | |
| 				" state x%x fc_flags x%x wait msecs x%x\n",
 | |
| 				vport->port_state, vport->fc_flag,
 | |
| 				jiffies_to_msecs(jiffies - start_time));
 | |
| }
 | |
| 
 | |
| int
 | |
| lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
 | |
| {
 | |
| 	struct lpfc_nodelist *ndlp;
 | |
| 	struct Scsi_Host *shost = fc_vport->shost;
 | |
| 	struct lpfc_vport *pport = (struct lpfc_vport *) shost->hostdata;
 | |
| 	struct lpfc_hba   *phba = pport->phba;
 | |
| 	struct lpfc_vport *vport = NULL;
 | |
| 	int instance;
 | |
| 	int vpi;
 | |
| 	int rc = VPORT_ERROR;
 | |
| 	int status;
 | |
| 
 | |
| 	if ((phba->sli_rev < 3) || !(phba->cfg_enable_npiv)) {
 | |
| 		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
 | |
| 				"1808 Create VPORT failed: "
 | |
| 				"NPIV is not enabled: SLImode:%d\n",
 | |
| 				phba->sli_rev);
 | |
| 		rc = VPORT_INVAL;
 | |
| 		goto error_out;
 | |
| 	}
 | |
| 
 | |
| 	vpi = lpfc_alloc_vpi(phba);
 | |
| 	if (vpi == 0) {
 | |
| 		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
 | |
| 				"1809 Create VPORT failed: "
 | |
| 				"Max VPORTs (%d) exceeded\n",
 | |
| 				phba->max_vpi);
 | |
| 		rc = VPORT_NORESOURCES;
 | |
| 		goto error_out;
 | |
| 	}
 | |
| 
 | |
| 	/* Assign an unused board number */
 | |
| 	if ((instance = lpfc_get_instance()) < 0) {
 | |
| 		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
 | |
| 				"1810 Create VPORT failed: Cannot get "
 | |
| 				"instance number\n");
 | |
| 		lpfc_free_vpi(phba, vpi);
 | |
| 		rc = VPORT_NORESOURCES;
 | |
| 		goto error_out;
 | |
| 	}
 | |
| 
 | |
| 	vport = lpfc_create_port(phba, instance, &fc_vport->dev);
 | |
| 	if (!vport) {
 | |
| 		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
 | |
| 				"1811 Create VPORT failed: vpi x%x\n", vpi);
 | |
| 		lpfc_free_vpi(phba, vpi);
 | |
| 		rc = VPORT_NORESOURCES;
 | |
| 		goto error_out;
 | |
| 	}
 | |
| 
 | |
| 	vport->vpi = vpi;
 | |
| 	lpfc_debugfs_initialize(vport);
 | |
| 
 | |
| 	if ((status = lpfc_vport_sparm(phba, vport))) {
 | |
| 		if (status == -EINTR) {
 | |
| 			lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
 | |
| 					 "1831 Create VPORT Interrupted.\n");
 | |
| 			rc = VPORT_ERROR;
 | |
| 		} else {
 | |
| 			lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
 | |
| 					 "1813 Create VPORT failed. "
 | |
| 					 "Cannot get sparam\n");
 | |
| 			rc = VPORT_NORESOURCES;
 | |
| 		}
 | |
| 		lpfc_free_vpi(phba, vpi);
 | |
| 		destroy_port(vport);
 | |
| 		goto error_out;
 | |
| 	}
 | |
| 
 | |
| 	u64_to_wwn(fc_vport->node_name, vport->fc_nodename.u.wwn);
 | |
| 	u64_to_wwn(fc_vport->port_name, vport->fc_portname.u.wwn);
 | |
| 
 | |
| 	memcpy(&vport->fc_sparam.portName, vport->fc_portname.u.wwn, 8);
 | |
| 	memcpy(&vport->fc_sparam.nodeName, vport->fc_nodename.u.wwn, 8);
 | |
| 
 | |
| 	if (!lpfc_valid_wwn_format(phba, &vport->fc_sparam.nodeName, "WWNN") ||
 | |
| 	    !lpfc_valid_wwn_format(phba, &vport->fc_sparam.portName, "WWPN")) {
 | |
| 		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
 | |
| 				 "1821 Create VPORT failed. "
 | |
| 				 "Invalid WWN format\n");
 | |
| 		lpfc_free_vpi(phba, vpi);
 | |
| 		destroy_port(vport);
 | |
| 		rc = VPORT_INVAL;
 | |
| 		goto error_out;
 | |
| 	}
 | |
| 
 | |
| 	if (!lpfc_unique_wwpn(phba, vport)) {
 | |
| 		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
 | |
| 				 "1823 Create VPORT failed. "
 | |
| 				 "Duplicate WWN on HBA\n");
 | |
| 		lpfc_free_vpi(phba, vpi);
 | |
| 		destroy_port(vport);
 | |
| 		rc = VPORT_INVAL;
 | |
| 		goto error_out;
 | |
| 	}
 | |
| 
 | |
| 	/* Create binary sysfs attribute for vport */
 | |
| 	lpfc_alloc_sysfs_attr(vport);
 | |
| 
 | |
| 	*(struct lpfc_vport **)fc_vport->dd_data = vport;
 | |
| 	vport->fc_vport = fc_vport;
 | |
| 
 | |
| 	/*
 | |
| 	 * In SLI4, the vpi must be activated before it can be used
 | |
| 	 * by the port.
 | |
| 	 */
 | |
| 	if ((phba->sli_rev == LPFC_SLI_REV4) &&
 | |
| 	    (pport->fc_flag & FC_VFI_REGISTERED)) {
 | |
| 		rc = lpfc_sli4_init_vpi(vport);
 | |
| 		if (rc) {
 | |
| 			lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
 | |
| 					"1838 Failed to INIT_VPI on vpi %d "
 | |
| 					"status %d\n", vpi, rc);
 | |
| 			rc = VPORT_NORESOURCES;
 | |
| 			lpfc_free_vpi(phba, vpi);
 | |
| 			goto error_out;
 | |
| 		}
 | |
| 	} else if (phba->sli_rev == LPFC_SLI_REV4) {
 | |
| 		/*
 | |
| 		 * Driver cannot INIT_VPI now. Set the flags to
 | |
| 		 * init_vpi when reg_vfi complete.
 | |
| 		 */
 | |
| 		vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
 | |
| 		lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
 | |
| 		rc = VPORT_OK;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	if ((phba->link_state < LPFC_LINK_UP) ||
 | |
| 	    (pport->port_state < LPFC_FABRIC_CFG_LINK) ||
 | |
| 	    (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) {
 | |
| 		lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
 | |
| 		rc = VPORT_OK;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	if (disable) {
 | |
| 		lpfc_vport_set_state(vport, FC_VPORT_DISABLED);
 | |
| 		rc = VPORT_OK;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	/* Use the Physical nodes Fabric NDLP to determine if the link is
 | |
| 	 * up and ready to FDISC.
 | |
| 	 */
 | |
| 	ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
 | |
| 	if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
 | |
| 	    ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) {
 | |
| 		if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) {
 | |
| 			lpfc_set_disctmo(vport);
 | |
| 			lpfc_initial_fdisc(vport);
 | |
| 		} else {
 | |
| 			lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
 | |
| 			lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
 | |
| 					 "0262 No NPIV Fabric support\n");
 | |
| 		}
 | |
| 	} else {
 | |
| 		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
 | |
| 	}
 | |
| 	rc = VPORT_OK;
 | |
| 
 | |
| out:
 | |
| 	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
 | |
| 			"1825 Vport Created.\n");
 | |
| 	lpfc_host_attrib_init(lpfc_shost_from_vport(vport));
 | |
| error_out:
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static int
 | |
| disable_vport(struct fc_vport *fc_vport)
 | |
| {
 | |
| 	struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
 | |
| 	struct lpfc_hba   *phba = vport->phba;
 | |
| 	struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
 | |
| 	long timeout;
 | |
| 
 | |
| 	ndlp = lpfc_findnode_did(vport, Fabric_DID);
 | |
| 	if (ndlp && NLP_CHK_NODE_ACT(ndlp)
 | |
| 	    && phba->link_state >= LPFC_LINK_UP) {
 | |
| 		vport->unreg_vpi_cmpl = VPORT_INVAL;
 | |
| 		timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
 | |
| 		if (!lpfc_issue_els_npiv_logo(vport, ndlp))
 | |
| 			while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout)
 | |
| 				timeout = schedule_timeout(timeout);
 | |
| 	}
 | |
| 
 | |
| 	lpfc_sli_host_down(vport);
 | |
| 
 | |
| 	/* Mark all nodes for discovery so we can remove them by
 | |
| 	 * calling lpfc_cleanup_rpis(vport, 1)
 | |
| 	 */
 | |
| 	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
 | |
| 		if (!NLP_CHK_NODE_ACT(ndlp))
 | |
| 			continue;
 | |
| 		if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
 | |
| 			continue;
 | |
| 		lpfc_disc_state_machine(vport, ndlp, NULL,
 | |
| 					NLP_EVT_DEVICE_RECOVERY);
 | |
| 	}
 | |
| 	lpfc_cleanup_rpis(vport, 1);
 | |
| 
 | |
| 	lpfc_stop_vport_timers(vport);
 | |
| 	lpfc_unreg_all_rpis(vport);
 | |
| 	lpfc_unreg_default_rpis(vport);
 | |
| 	/*
 | |
| 	 * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) does the
 | |
| 	 * scsi_host_put() to release the vport.
 | |
| 	 */
 | |
| 	lpfc_mbx_unreg_vpi(vport);
 | |
| 
 | |
| 	lpfc_vport_set_state(vport, FC_VPORT_DISABLED);
 | |
| 	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
 | |
| 			 "1826 Vport Disabled.\n");
 | |
| 	return VPORT_OK;
 | |
| }
 | |
| 
 | |
| static int
 | |
| enable_vport(struct fc_vport *fc_vport)
 | |
| {
 | |
| 	struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
 | |
| 	struct lpfc_hba   *phba = vport->phba;
 | |
| 	struct lpfc_nodelist *ndlp = NULL;
 | |
| 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 | |
| 
 | |
| 	if ((phba->link_state < LPFC_LINK_UP) ||
 | |
| 	    (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) {
 | |
| 		lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
 | |
| 		return VPORT_OK;
 | |
| 	}
 | |
| 
 | |
| 	spin_lock_irq(shost->host_lock);
 | |
| 	vport->load_flag |= FC_LOADING;
 | |
| 	vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
 | |
| 	spin_unlock_irq(shost->host_lock);
 | |
| 
 | |
| 	/* Use the Physical nodes Fabric NDLP to determine if the link is
 | |
| 	 * up and ready to FDISC.
 | |
| 	 */
 | |
| 	ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
 | |
| 	if (ndlp && NLP_CHK_NODE_ACT(ndlp)
 | |
| 	    && ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) {
 | |
| 		if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) {
 | |
| 			lpfc_set_disctmo(vport);
 | |
| 			lpfc_initial_fdisc(vport);
 | |
| 		} else {
 | |
| 			lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
 | |
| 			lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
 | |
| 					 "0264 No NPIV Fabric support\n");
 | |
| 		}
 | |
| 	} else {
 | |
| 		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
 | |
| 	}
 | |
| 	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
 | |
| 			 "1827 Vport Enabled.\n");
 | |
| 	return VPORT_OK;
 | |
| }
 | |
| 
 | |
| int
 | |
| lpfc_vport_disable(struct fc_vport *fc_vport, bool disable)
 | |
| {
 | |
| 	if (disable)
 | |
| 		return disable_vport(fc_vport);
 | |
| 	else
 | |
| 		return enable_vport(fc_vport);
 | |
| }
 | |
| 
 | |
| 
 | |
| int
 | |
| lpfc_vport_delete(struct fc_vport *fc_vport)
 | |
| {
 | |
| 	struct lpfc_nodelist *ndlp = NULL;
 | |
| 	struct Scsi_Host *shost = (struct Scsi_Host *) fc_vport->shost;
 | |
| 	struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
 | |
| 	struct lpfc_hba   *phba = vport->phba;
 | |
| 	long timeout;
 | |
| 
 | |
| 	if (vport->port_type == LPFC_PHYSICAL_PORT) {
 | |
| 		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
 | |
| 				 "1812 vport_delete failed: Cannot delete "
 | |
| 				 "physical host\n");
 | |
| 		return VPORT_ERROR;
 | |
| 	}
 | |
| 
 | |
| 	/* If the vport is a static vport fail the deletion. */
 | |
| 	if ((vport->vport_flag & STATIC_VPORT) &&
 | |
| 		!(phba->pport->load_flag & FC_UNLOADING)) {
 | |
| 		lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
 | |
| 				 "1837 vport_delete failed: Cannot delete "
 | |
| 				 "static vport.\n");
 | |
| 		return VPORT_ERROR;
 | |
| 	}
 | |
| 	spin_lock_irq(&phba->hbalock);
 | |
| 	vport->load_flag |= FC_UNLOADING;
 | |
| 	spin_unlock_irq(&phba->hbalock);
 | |
| 	/*
 | |
| 	 * If we are not unloading the driver then prevent the vport_delete
 | |
| 	 * from happening until after this vport's discovery is finished.
 | |
| 	 */
 | |
| 	if (!(phba->pport->load_flag & FC_UNLOADING)) {
 | |
| 		int check_count = 0;
 | |
| 		while (check_count < ((phba->fc_ratov * 3) + 3) &&
 | |
| 		       vport->port_state > LPFC_VPORT_FAILED &&
 | |
| 		       vport->port_state < LPFC_VPORT_READY) {
 | |
| 			check_count++;
 | |
| 			msleep(1000);
 | |
| 		}
 | |
| 		if (vport->port_state > LPFC_VPORT_FAILED &&
 | |
| 		    vport->port_state < LPFC_VPORT_READY)
 | |
| 			return -EAGAIN;
 | |
| 	}
 | |
| 	/*
 | |
| 	 * This is a bit of a mess.  We want to ensure the shost doesn't get
 | |
| 	 * torn down until we're done with the embedded lpfc_vport structure.
 | |
| 	 *
 | |
| 	 * Beyond holding a reference for this function, we also need a
 | |
| 	 * reference for outstanding I/O requests we schedule during delete
 | |
| 	 * processing.  But once we scsi_remove_host() we can no longer obtain
 | |
| 	 * a reference through scsi_host_get().
 | |
| 	 *
 | |
| 	 * So we take two references here.  We release one reference at the
 | |
| 	 * bottom of the function -- after delinking the vport.  And we
 | |
| 	 * release the other at the completion of the unreg_vpi that get's
 | |
| 	 * initiated after we've disposed of all other resources associated
 | |
| 	 * with the port.
 | |
| 	 */
 | |
| 	if (!scsi_host_get(shost))
 | |
| 		return VPORT_INVAL;
 | |
| 	if (!scsi_host_get(shost)) {
 | |
| 		scsi_host_put(shost);
 | |
| 		return VPORT_INVAL;
 | |
| 	}
 | |
| 	lpfc_free_sysfs_attr(vport);
 | |
| 
 | |
| 	lpfc_debugfs_terminate(vport);
 | |
| 
 | |
| 	/* Remove FC host and then SCSI host with the vport */
 | |
| 	fc_remove_host(lpfc_shost_from_vport(vport));
 | |
| 	scsi_remove_host(lpfc_shost_from_vport(vport));
 | |
| 
 | |
| 	ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
 | |
| 
 | |
| 	/* In case of driver unload, we shall not perform fabric logo as the
 | |
| 	 * worker thread already stopped at this stage and, in this case, we
 | |
| 	 * can safely skip the fabric logo.
 | |
| 	 */
 | |
| 	if (phba->pport->load_flag & FC_UNLOADING) {
 | |
| 		if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
 | |
| 		    ndlp->nlp_state == NLP_STE_UNMAPPED_NODE &&
 | |
| 		    phba->link_state >= LPFC_LINK_UP) {
 | |
| 			/* First look for the Fabric ndlp */
 | |
| 			ndlp = lpfc_findnode_did(vport, Fabric_DID);
 | |
| 			if (!ndlp)
 | |
| 				goto skip_logo;
 | |
| 			else if (!NLP_CHK_NODE_ACT(ndlp)) {
 | |
| 				ndlp = lpfc_enable_node(vport, ndlp,
 | |
| 							NLP_STE_UNUSED_NODE);
 | |
| 				if (!ndlp)
 | |
| 					goto skip_logo;
 | |
| 			}
 | |
| 			/* Remove ndlp from vport npld list */
 | |
| 			lpfc_dequeue_node(vport, ndlp);
 | |
| 
 | |
| 			/* Indicate free memory when release */
 | |
| 			spin_lock_irq(&phba->ndlp_lock);
 | |
| 			NLP_SET_FREE_REQ(ndlp);
 | |
| 			spin_unlock_irq(&phba->ndlp_lock);
 | |
| 			/* Kick off release ndlp when it can be safely done */
 | |
| 			lpfc_nlp_put(ndlp);
 | |
| 		}
 | |
| 		goto skip_logo;
 | |
| 	}
 | |
| 
 | |
| 	/* Otherwise, we will perform fabric logo as needed */
 | |
| 	if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
 | |
| 	    ndlp->nlp_state == NLP_STE_UNMAPPED_NODE &&
 | |
| 	    phba->link_state >= LPFC_LINK_UP &&
 | |
| 	    phba->fc_topology != LPFC_TOPOLOGY_LOOP) {
 | |
| 		if (vport->cfg_enable_da_id) {
 | |
| 			timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
 | |
| 			if (!lpfc_ns_cmd(vport, SLI_CTNS_DA_ID, 0, 0))
 | |
| 				while (vport->ct_flags && timeout)
 | |
| 					timeout = schedule_timeout(timeout);
 | |
| 			else
 | |
| 				lpfc_printf_log(vport->phba, KERN_WARNING,
 | |
| 						LOG_VPORT,
 | |
| 						"1829 CT command failed to "
 | |
| 						"delete objects on fabric\n");
 | |
| 		}
 | |
| 		/* First look for the Fabric ndlp */
 | |
| 		ndlp = lpfc_findnode_did(vport, Fabric_DID);
 | |
| 		if (!ndlp) {
 | |
| 			/* Cannot find existing Fabric ndlp, allocate one */
 | |
| 			ndlp = mempool_alloc(phba->nlp_mem_pool, GFP_KERNEL);
 | |
| 			if (!ndlp)
 | |
| 				goto skip_logo;
 | |
| 			lpfc_nlp_init(vport, ndlp, Fabric_DID);
 | |
| 			/* Indicate free memory when release */
 | |
| 			NLP_SET_FREE_REQ(ndlp);
 | |
| 		} else {
 | |
| 			if (!NLP_CHK_NODE_ACT(ndlp))
 | |
| 				ndlp = lpfc_enable_node(vport, ndlp,
 | |
| 						NLP_STE_UNUSED_NODE);
 | |
| 				if (!ndlp)
 | |
| 					goto skip_logo;
 | |
| 
 | |
| 			/* Remove ndlp from vport npld list */
 | |
| 			lpfc_dequeue_node(vport, ndlp);
 | |
| 			spin_lock_irq(&phba->ndlp_lock);
 | |
| 			if (!NLP_CHK_FREE_REQ(ndlp))
 | |
| 				/* Indicate free memory when release */
 | |
| 				NLP_SET_FREE_REQ(ndlp);
 | |
| 			else {
 | |
| 				/* Skip this if ndlp is already in free mode */
 | |
| 				spin_unlock_irq(&phba->ndlp_lock);
 | |
| 				goto skip_logo;
 | |
| 			}
 | |
| 			spin_unlock_irq(&phba->ndlp_lock);
 | |
| 		}
 | |
| 		if (!(vport->vpi_state & LPFC_VPI_REGISTERED))
 | |
| 			goto skip_logo;
 | |
| 		vport->unreg_vpi_cmpl = VPORT_INVAL;
 | |
| 		timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
 | |
| 		if (!lpfc_issue_els_npiv_logo(vport, ndlp))
 | |
| 			while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout)
 | |
| 				timeout = schedule_timeout(timeout);
 | |
| 	}
 | |
| 
 | |
| 	if (!(phba->pport->load_flag & FC_UNLOADING))
 | |
| 		lpfc_discovery_wait(vport);
 | |
| 
 | |
| skip_logo:
 | |
| 	lpfc_cleanup(vport);
 | |
| 	lpfc_sli_host_down(vport);
 | |
| 
 | |
| 	lpfc_stop_vport_timers(vport);
 | |
| 
 | |
| 	if (!(phba->pport->load_flag & FC_UNLOADING)) {
 | |
| 		lpfc_unreg_all_rpis(vport);
 | |
| 		lpfc_unreg_default_rpis(vport);
 | |
| 		/*
 | |
| 		 * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi)
 | |
| 		 * does the scsi_host_put() to release the vport.
 | |
| 		 */
 | |
| 		if (lpfc_mbx_unreg_vpi(vport))
 | |
| 			scsi_host_put(shost);
 | |
| 	} else
 | |
| 		scsi_host_put(shost);
 | |
| 
 | |
| 	lpfc_free_vpi(phba, vport->vpi);
 | |
| 	vport->work_port_events = 0;
 | |
| 	spin_lock_irq(&phba->hbalock);
 | |
| 	list_del_init(&vport->listentry);
 | |
| 	spin_unlock_irq(&phba->hbalock);
 | |
| 	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
 | |
| 			 "1828 Vport Deleted.\n");
 | |
| 	scsi_host_put(shost);
 | |
| 	return VPORT_OK;
 | |
| }
 | |
| 
 | |
| struct lpfc_vport **
 | |
| lpfc_create_vport_work_array(struct lpfc_hba *phba)
 | |
| {
 | |
| 	struct lpfc_vport *port_iterator;
 | |
| 	struct lpfc_vport **vports;
 | |
| 	int index = 0;
 | |
| 	vports = kzalloc((phba->max_vports + 1) * sizeof(struct lpfc_vport *),
 | |
| 			 GFP_KERNEL);
 | |
| 	if (vports == NULL)
 | |
| 		return NULL;
 | |
| 	spin_lock_irq(&phba->hbalock);
 | |
| 	list_for_each_entry(port_iterator, &phba->port_list, listentry) {
 | |
| 		if (!scsi_host_get(lpfc_shost_from_vport(port_iterator))) {
 | |
| 			if (!(port_iterator->load_flag & FC_UNLOADING))
 | |
| 				lpfc_printf_vlog(port_iterator, KERN_ERR,
 | |
| 					 LOG_VPORT,
 | |
| 					 "1801 Create vport work array FAILED: "
 | |
| 					 "cannot do scsi_host_get\n");
 | |
| 			continue;
 | |
| 		}
 | |
| 		vports[index++] = port_iterator;
 | |
| 	}
 | |
| 	spin_unlock_irq(&phba->hbalock);
 | |
| 	return vports;
 | |
| }
 | |
| 
 | |
| void
 | |
| lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports)
 | |
| {
 | |
| 	int i;
 | |
| 	if (vports == NULL)
 | |
| 		return;
 | |
| 	for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
 | |
| 		scsi_host_put(lpfc_shost_from_vport(vports[i]));
 | |
| 	kfree(vports);
 | |
| }
 | |
| 
 | |
| 
 | |
| /**
 | |
|  * lpfc_vport_reset_stat_data - Reset the statistical data for the vport
 | |
|  * @vport: Pointer to vport object.
 | |
|  *
 | |
|  * This function resets the statistical data for the vport. This function
 | |
|  * is called with the host_lock held
 | |
|  **/
 | |
| void
 | |
| lpfc_vport_reset_stat_data(struct lpfc_vport *vport)
 | |
| {
 | |
| 	struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
 | |
| 
 | |
| 	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
 | |
| 		if (!NLP_CHK_NODE_ACT(ndlp))
 | |
| 			continue;
 | |
| 		if (ndlp->lat_data)
 | |
| 			memset(ndlp->lat_data, 0, LPFC_MAX_BUCKET_COUNT *
 | |
| 				sizeof(struct lpfc_scsicmd_bkt));
 | |
| 	}
 | |
| }
 | |
| 
 | |
| 
 | |
| /**
 | |
|  * lpfc_alloc_bucket - Allocate data buffer required for statistical data
 | |
|  * @vport: Pointer to vport object.
 | |
|  *
 | |
|  * This function allocates data buffer required for all the FC
 | |
|  * nodes of the vport to collect statistical data.
 | |
|  **/
 | |
| void
 | |
| lpfc_alloc_bucket(struct lpfc_vport *vport)
 | |
| {
 | |
| 	struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
 | |
| 
 | |
| 	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
 | |
| 		if (!NLP_CHK_NODE_ACT(ndlp))
 | |
| 			continue;
 | |
| 
 | |
| 		kfree(ndlp->lat_data);
 | |
| 		ndlp->lat_data = NULL;
 | |
| 
 | |
| 		if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) {
 | |
| 			ndlp->lat_data = kcalloc(LPFC_MAX_BUCKET_COUNT,
 | |
| 					 sizeof(struct lpfc_scsicmd_bkt),
 | |
| 					 GFP_ATOMIC);
 | |
| 
 | |
| 			if (!ndlp->lat_data)
 | |
| 				lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE,
 | |
| 					"0287 lpfc_alloc_bucket failed to "
 | |
| 					"allocate statistical data buffer DID "
 | |
| 					"0x%x\n", ndlp->nlp_DID);
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * lpfc_free_bucket - Free data buffer required for statistical data
 | |
|  * @vport: Pointer to vport object.
 | |
|  *
 | |
|  * Th function frees statistical data buffer of all the FC
 | |
|  * nodes of the vport.
 | |
|  **/
 | |
| void
 | |
| lpfc_free_bucket(struct lpfc_vport *vport)
 | |
| {
 | |
| 	struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
 | |
| 
 | |
| 	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
 | |
| 		if (!NLP_CHK_NODE_ACT(ndlp))
 | |
| 			continue;
 | |
| 
 | |
| 		kfree(ndlp->lat_data);
 | |
| 		ndlp->lat_data = NULL;
 | |
| 	}
 | |
| }
 |